Folie 1

Construction of the LISA-10

Technical Data

LiSA 10:

• 32 Bit Microcontroller.

• 64 kB RAM Memory.

• 1024 KB Parameter Memory (EEprom)

(pre- 2003 512kB).

• Real time Clock.

• 4 serial ports. (Group connection, PC-Connection,

Connection to Car, DCP)

• KeyBoard-Display

• Electronic Monitoring

• Controll relays for external outputs along with 2 built in free

programable.

IO – Board (IO16)

IO Board IO16

Folie 6

Car Electronics

APO12

APO 12 LBM 09

LiSA-Bus-Driver (LBD-02)

LiSA BUS Example with Ind Open

Results of Shaft Learn

Slow down in Pulse operation is recorded from the shaft switch

activation and pulses from encoder.

:

gggggggggg

Max deceleration is

calculated from VO/VU

Floor level Adjustment (002)

Adjustment from LiSA-10 (002) Deceleration Up/Dn or Step

Correction 002

Lift stop 15 mm low in the up

direction

Adjustment in 002

Step Correction Example

Example 1 using Step Correction:

The lift approaches the 2nd

floor in the up direction and

stops 8mm high.

• To adjust the level we must

adjust “STEP CORRECTION –

UP TO LANDING 2.

Ride Quality using Multi Speed

LiSA-10 Multi Speed Commands.

General Elevator Parameters

General elevator Times

Travel Time / Impulses

Inputs Addresses

Outputs addresses

Key Addresses

Relay Addresses

Display Functions

Door Open Function

Learning Travel Values

Special Parameter