introduction to aerospace engineering ii: structural joints 2
DESCRIPTION
TRANSCRIPT
![Page 1: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/1.jpg)
1 Challenge the future
Introduction to Aerospace Engineering
Lecture slides
![Page 2: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/2.jpg)
10-1-2012
Challenge the future
DelftUniversity ofTechnology
Structural jointsWelded, mechanically fastened, bonded
Faculty of Aerospace Engineering
![Page 3: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/3.jpg)
2Structural joints | 27
Learning objectives
• Describe the different joint types
• Mechanically fastened joints
• Explain the difference between tension and shear joints
• Describe the load transfer mechanisms
• Describe the failure modes
• Welded joints
• Adhesive bonded joints
Student should be able to…
![Page 4: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/4.jpg)
3Structural joints | 27
Mechanically fastened joints
• Types of fasteners
• Threaded fasteners
• Rivets
• Blind fasteners
• Nails
Types of joints
![Page 5: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/5.jpg)
4Structural joints | 27
Mechanically fastened joints
• Joints classified by loading mode of fastener
Types of joints
Shear Tension
![Page 6: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/6.jpg)
5Structural joints | 27
Mechanically fastened joints
• Tensile joint
• Mechanical joint (bolts)
• Welding (laser beam, friction stir welding)
• Shear joint
• Mechanical joint (rivets, bolts)
• Welding (laser beam, friction stir, spot welding)
• Adhesive bonding
Types of joints
![Page 7: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/7.jpg)
6Structural joints | 27
Mechanically fastened joints
• Many variations
• T- and angle-clips
• Angle- and channel-fittings
• Flanges
Joining – tensile joint Tension
Fokker F-28 horizontal stabilizer (flange) Channel fitting fromAn MK8 Meteor
![Page 8: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/8.jpg)
7Structural joints | 27
Mechanically fastened joints
• Fuselage skin joints
• Shear clips
• Stringer-to-skin connections
• Lugs
Joining – shear joint
Wing spar connection lug
Fuselage butt joint
Fuselage lap joint
![Page 9: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/9.jpg)
8Structural joints | 27
Mechanically fastened joints
• Low cost
• Installation
• Unit
• Hole filling properties
• Kt reduction
• Residual stress
• Load transfer
• Permanency
• Can not vibrate loose
Benefits of rivets
![Page 10: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/10.jpg)
9Structural joints | 27
Mechanically fastened joints
• Removable
• Assembly/disassembly
• Reusability
• High strength
• Wider range of materials
• Heat treatments
• Case hardening
• Multi-purpose
• Shear bolts
• Tension bolts
• Tension-shear bolts
Benefits of threaded fasteners
![Page 11: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/11.jpg)
10Structural joints | 27
• Solid rivets: squeezing ⇒ Interference
Mechanically fastened jointsJoint characteristics
1 2
3 4
P
Plastic region
Elastic region
![Page 12: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/12.jpg)
11Structural joints | 27
• Open hole loading
• Filled hole (interference) loading
Mechanically fastened jointsJoint characteristics
![Page 13: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/13.jpg)
12Structural joints | 27
• Constrained deformation
• Reduction of stress concentration factor Kt
Mechanically fastened jointsJoint characteristics
Open hole Filled hole
>-S-S
~2S3S
![Page 14: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/14.jpg)
13Structural joints | 27
Mechanically fastened joints
• Secondary bending ⇒ peel stress
Joint characteristics
![Page 15: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/15.jpg)
14Structural joints | 27
Mechanically fastened joints
• Secondary bending ⇒ peel stress
Joint characteristics
![Page 16: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/16.jpg)
15Structural joints | 27
Mechanically fastened joints
Load Transfer
Secondary Loads
BypassBearing Friction
Secondary Bending Interference
Load transfer mechanism
![Page 17: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/17.jpg)
16Structural joints | 27
Mechanically fastened jointsFailure modes
Net Section Tension
BearingShear
Tear OutBolt Shear
![Page 18: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/18.jpg)
17Structural joints | 27
Mechanically fastened joints
• Reinforcing laminate edge for bearing by
• Additional composite plies
• Adding metallic inserts
• Replacing composite by metallic plies
Composites
![Page 19: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/19.jpg)
18Structural joints | 27
• Bolted joint
• Honeycomb inserts: attached
to both facings, surrounded by
filling compound
Mechanically fastened jointsComposites
![Page 20: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/20.jpg)
19Structural joints | 27
Mechanically fastened joints
• Bolted joint
• Taper to laminate
Composites
![Page 21: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/21.jpg)
20Structural joints | 27
Welded joints
• Laser beam welding Friction stir welding
Metals
![Page 22: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/22.jpg)
21Structural joints | 27
Welded joints
• Welding
• Laser beam welding, friction stir welding, spot welding
• Formation of residual stresses
• Stress concentrations
• Elastic ‘spring back’
Metals
![Page 23: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/23.jpg)
22Structural joints | 27
Welded joints
• With multiple components an ‘integral design’ is created; no crack
barriers
Metals
![Page 24: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/24.jpg)
23Structural joints | 27
Welded joints
• Thermoplastic
• Resistance welding
Composites
![Page 25: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/25.jpg)
24Structural joints | 27
• Metallic components
• Anodizing
• Priming
BondingPretreatment
![Page 26: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/26.jpg)
25Structural joints | 27
• Relevant bonded structures
• Doublers
• Clips/frames/stringers
• Patch repairs
• Failure possible in
• Substrate
• Adhesive
BondingFailure modes
doubler/patch
substrate
bondline fillet
repair patch
damaged substrate
bondline fillet
damage
clip/frame
substrate
bondline
fillet
![Page 27: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/27.jpg)
26Structural joints | 27
Bonding
• Bonded joint
• Scarf joint
• Stepped lap-joint
Composites
![Page 28: Introduction to Aerospace Engineering II: structural joints 2](https://reader033.vdocument.in/reader033/viewer/2022050920/54ba6fc44a795979708b46ba/html5/thumbnails/28.jpg)
27Structural joints | 27
Summary
• Different joint types
• Mechanically fastened joints
• Tension and shear joints
• Load transfer mechanisms
• Failure modes
• Welded joints
• Adhesive bonded joints
Structural joints