introduction to guided functions for vw and audi
TRANSCRIPT
![Page 1: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/1.jpg)
Introduction to Guided functions for VW and AUDI
Products supported
PRO3 and up
Models supported:
All systems of all VW and AUDI models, supporting up to 2019MY
Function introduction:
Guided functions have the powerful advantage of easy operation.
Each guided function is a complete function integrated by multiple basic
functions, saving users from the tedious search for the channel number
and login code of the corresponding function. Each function has the
detailed operational help information and operating condition instructions.
For vehicles of different models and configurations, specific operation
guidelines are provided, offering hints for corresponding operations, such
as, automatic login, matching, setting, coding and etc. With these guided
functions, it is equivalent to having an expert who can provide ideas, help
find maintenance manuals and test functions in the maintenance process
of vehicles. At present, the comprehensive diagnostic products all over
the world rarely support all guided functions for VW and AUDI.
Guided functions supported:
Support a total of over 30,000 functions for VW and AUDI, for example
![Page 2: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/2.jpg)
Service Regeneration, Particle Filter (DPF)
Adapt Injector Correction Value
Reset Engine Control Adaptation Values
Throttle Learning
Fill Coolant Circuit
Adapt Values, SCR system
Activating/Deactivating Cruise Control System
Basic Setting of Transmission
Basic Setting of Sensors (-G85/-G200/-G201/-G251)
Basic Setting/Bleeding Brake System
Initial A/C Compressor Run-In
Adaptation Automatic Locking At 15 km/h
Distance Control System Calibration
Deactivate or Activate Airbags And Belt Tensioners
Adaptation Menu Key Multifunction Steering Wheel
Adapting Service Intervals
Service Interval Display, Resetting
Transport Mode, Switching Off/On
Level Control System Basic Settings
Brake Pad Change
Headlight Beam Adjustment
Battery Adaptation
![Page 3: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/3.jpg)
Rear View Camera System Calibration
Driver Assistance Systems Front Sensor System Calibration
etc.
Test functions:
1. Replacement of electronic parking brake pads
(replacement of handbrake pads) for Touareg
Background for performing the function 1. This function ensures safe and effective maintenance of the electronic parking brake system.
2. The main functions include placing the handbrake pads to the installation position, checking the basic setting of the parking brake (checking the gap of handbrake pads), running-in and calibration of handbrake pads and etc.
The basic setting, running-in and calibration for the handbrake pads of Touareg cannot be performed, if you use a device that does not support guided functions.
![Page 4: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/4.jpg)
The operations can be executed if you use a device supporting guided functions. Please note that network connection is required by guided functions. Please download the sub-package for the corresponding model before proceeding. [Operation instructions] 1.
the software (V28.55 or higher) for VW models. After entering, the following main menu shall be displayed.
![Page 5: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/5.jpg)
- Select the model as shows below and download the corresponding sub-package file:
After entering, it shows
![Page 6: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/6.jpg)
![Page 7: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/7.jpg)
-Basic adjustment electro-
Check the item as prompted and click Complete/Continue after confirming that there is no problem
![Page 8: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/8.jpg)
Select Complete/Continue
Ensure the voltage is stable and select Complete/Continue
![Page 9: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/9.jpg)
Choose according to the conditions and select YES here
![Page 10: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/10.jpg)
Turn off the ignition switch
Keep ignition switch OFF and wait.
![Page 11: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/11.jpg)
Turn on ignition switch
![Page 12: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/12.jpg)
Select Complete/Continue after completing automatic coding
Release electronic handbrake button as prompted and select Complete/Continue
![Page 13: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/13.jpg)
Do not depress the brake as prompted and select Complete/Continue
Checking the brake pad clearance...Please wait!
![Page 14: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/14.jpg)
Read the clearance. If the clearance is within the range, the function can be continued. Otherwise, it is necessary to remove the rear wheels and repeatedly adjust the clearance to make the clearance within the tolerance range. Then continue to execute the function by clicking Complete/Continue
Turn off the ignition switch
![Page 15: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/15.jpg)
Keep ignition switch OFF for several seconds
Start the engine and let it run at idle
![Page 16: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/16.jpg)
Start to perform running-in function. Select Complete/Continue
Please do operate according to prompts! Select Complete/Continue
![Page 17: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/17.jpg)
Bring the vehicle to a full stop
Operate according to prompts. Driving is required during the process. Select Complete/Continue
![Page 18: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/18.jpg)
Start the vehicle within the time countdown indicated by the interface, drive the vehicle and keep
Drive away and select Complete/Continue
![Page 19: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/19.jpg)
Bring the vehicle to a full stop. The running-in process requires repeated operations until it is successful. A complete process requires 8 correct running-ins.
![Page 20: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/20.jpg)
Wait 30 seconds to cool down the parking brake
![Page 21: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/21.jpg)
Basic setting completed
The entire process ends.
2. Basic setting of transmission Background for performing the function 1. After repairing the transmission or replacing the ECU of the gearbox, it is
![Page 22: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/22.jpg)
necessary to perform gear learning and setting to the transmission again.
If you use a device that does not support guided functions, the operation shall be more complicated. It is necessary to find the corresponding data for the specific model. The vehicle should reach certain conditions. And the entry of the channnel number is required to match the setting.
If you use a device supporting guided functions, you can proceed directly according to the prompts. [Operation instructions] 3. Turn on the ignition switch of the vehicle, connect the connector of
the software (V28.55 or higher) for VW models. After entering, the following main menu shall be displayed.
Model: 3G Passat 2015> 2018 6-speed automatic transmission 09G
![Page 23: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/23.jpg)
- Select the model according to the following information:
![Page 24: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/24.jpg)
![Page 25: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/25.jpg)
-6-
-J217-
![Page 26: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/26.jpg)
Operate according to prompts. Shift lever in P position. Select Complete/Continue
Static DTCs need to be cleared before basic setting can be made. Select Complete/Continue
![Page 27: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/27.jpg)
Select Complete/Continue
Wait a few seconds...
![Page 28: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/28.jpg)
The temperature of the gear oil should be higher than 65 degrees Celsius. Select Complete/Continue
![Page 29: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/29.jpg)
Select Complete/Continue
Perform gear matching. The process has to be carried out 3 times. Shift gears as prompted. Select Complete/Continue
![Page 30: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/30.jpg)
Select Complete/Continue
After operating as demanded, select Complete/Continue
![Page 31: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/31.jpg)
Select Complete/Continue
![Page 32: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/32.jpg)
Select Complete/Continue
After operating as demanded, select Complete/Continue
![Page 33: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/33.jpg)
Wait a few seconds...
Select Complete/Continue
![Page 34: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/34.jpg)
Select Complete/Continue
After operating as demanded, select Complete/Continue
![Page 35: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/35.jpg)
After completing gear learning, please perform the adaptation drive. Operate as prompted. Select YES
![Page 36: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/36.jpg)
Select Complete/Continue
Select Complete/Continue
![Page 37: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/37.jpg)
Select Complete/Continue At this point, the transmission shall be upshifted from 1st to 6th gear, and then downshifted from 6th to 1st gear. The upshift section is taken for reference.
![Page 38: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/38.jpg)
![Page 39: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/39.jpg)
![Page 40: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/40.jpg)
Select Complete/Continue
Select NO
![Page 41: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/41.jpg)
Select Complete/Continue
Select Complete/Continue
![Page 42: Introduction to Guided functions for VW and AUDI](https://reader031.vdocument.in/reader031/viewer/2022012409/616a4e4c11a7b741a3510e08/html5/thumbnails/42.jpg)
The entire process ends. [Statement] The copyright of this document belongs to Launch Technology Co., Ltd. Any individual or unit shall not quote or reprint without consent.