introduction to ht-ide3000 micro-c development system department
TRANSCRIPT
Introduction to HT-IDE3000
Micro-C development System Department
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
HT-ICE Features
Real-time emulation
Support data-sensitive breakpoint
Support real-time conditional tracing
External signals for breakpoints and tracing
Allow internal/external oscillator
Connect to PC via LPT or USB(coming soon)
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
HT-IDE3000 Features
Section-based multiple sources programming
Support mixed C & assembly(ASM) language
Auto-relocation for code and data sections
Comprehensive on-line help
Support MCU Simulator & VPM
LCD simulator (for both HT-ICE & simulator)
Work for windows 95/98/2000/XP/ME
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
HT-IDE3000 installation(1)
From CD
click ‘Setup HT-IDE3000’ button
To install HT-IDE3000 V6.0click ‘HT-IDE3000’ button
To install the latest Service Packclick ‘Service Pack’ button
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
HT-IDE3000 installation(2)
From Holtek’s web site
Visit http://www.holtek.com.tw
To install HT-IDE3000 V6.0download ht-ide3000v6.exe & execute it
To install the latest Service Packdownload ht-ide3000spx.exe & execute it
Quick Start
Step 0. Starting HT-IDE3000Step 1. Creating a new project Step 2. Writing source programsStep 3. Adding source programs into the projectStep 4. Building the project Step 5. Debugging the projectStep 6. project Build OK
Step 0. Starting HT-IDE3000
Under windows platform, Select
Start/Program Files/Holtek Development System/HT-IDE3000
Area code
HT-IDE3000 System will ask you for some information when you start it first time.
HT-IDE3000 welcome Logo
The welcome logo will be shown when you start HT-IDE3000
Click the mouse left button or wait 2 seconds to pass it
Welcome LOGO
Connection failure
In the duration of running HT-IDE3000, the system will show this dialog while detecting a connection failure between the computer and the HT-ICE.
Connection success
While starting HT-IDE3000, the system will show this dialog after the computer connect to the HT-ICE successfully.
Step 1. Creating a new project
Select Project/New.
New Project Dialog
To choose the position to save the project.
To select the MCU item.
Project Option Dialog
To setup options for Assembler and Linker
Mask Option Dialog
To setup options for MCU.
Click OK,
You have finished initializing the new project.
Step 2. Writing source programs
HT-IDE3000 has a build-in text editor.
To create a new source fileSelect File/New
To save the source fileSelect File/Save As
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
Single program file
All procedures and variables are defined in the same file.
No external variables and procedures are allowed.
Suits the simple program for the MCUs of small ROM size.
Cannot be reused by another project.
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
Multiple program files
Separate different modules into different files
Use public/extern label for external procedure
Use public/extern symbol for external variable
A project consists of two or more files
Advantages:Programs will be more readable.
Program codes can be reusable.
Reduce the build time for the project.
Step 3. Adding source programs into the project
A project consists of one or more source program(s).
Select Project/Edit command to add the files to the project.
Edit Project Dialog
2003 Holtek MCU Product Seminar2003 Holtek MCU Product Seminar
Linking Library files
Use Options/Project command to link library with the project
Step 4. Building the project
Select Project/Build or Project/Rebuild All
Differences between Build and Rebuild AllRebuild All will compile all files in the project.Build will compile the dirty files only.A dirty file means that the file had been modified since the last build time.
Select Project Assemble/CompileAssemble/Compile the .ASM/.C program in the active window.
The error messages will be shown in the output window while compiling/building the file/project.Double click on the message line, the system will automatically highlight the line of the program syntax error.
Step 5. Debugging the project
If the project is free of syntax error, the system will download the program to the HT-ICE and show ‘Build OK’
You can use debug commands to debug the project.
Debug Commands(I)
Go: Start running the program.
Go to Cursor: Run the program and stop it if the cursor line is executed.
Jump to Cursor: Set the program counter to the position of the cursor line.
Stop: Stop the program.
Stop Trace: Stop tracing.
Reset: Execute a software Reset.
Debug Commands(II)
Power-on Reset: Execute a software Power-on Reset.
Reset Trace: Clear the trace buffer.
Step Into: Execute an instruction. If a function call is meet, stop at the first instruction line of the function.
Step Over: Execute an instruction. If a function call is meet, stop at the next line of the function call.
Step Out: Execute the program and stop at the position indicated by the top stack level.
Stepping: Stepping automatically.
Step 6. Project build OK
The system will generate a .COD file if you select Mask type MCU (eg. HT48C10-1)
The system will generate a .OTP file if you select OTP type MCU (eg. HT48R10A-1)
Windows of HT-IDE3000RAMROMTrace ListRegisterWatchStackProgramOutput
RAM window
ROM window
Trace List window
Register window
Register window is dockable
Watch window
Watch window is dockable
Stack window
Stack window is dockable
Program window
Program window is dockable
Output window
Output window is dockable
Files and Building ProcessSource files(ASM/C)
COD/OTP File
Assembler/Compiler
LibrarianListing File(LST)
Object File(OBJ)
Linker
Map File(MAP)
Task File(TSK)
Library File(LIB)
Option File(OPT)
COD/OTP Generator
Option Configurer
Debug File(DBG)
Breakpoint(I)
Code breakpoints Eg, To set the 21th line of program as breakpoint,
Step1. Move the cursor to the 21th line.
Step2. Select Debug\Breakpoints
The location field shows .21 and the space selection is code, indicates the 21th line is to be set as breakpoint.
Step 3. Click Add button, the new breakpoint will be added into the Breakpoint ListBox.
Step 4. Be sure to click OK button before exit.
Breakpoint Dialog (code)
Breakpoint(II)
Data breakpointsStep 1. Select Debug\Breakpoints
Step 2. Enter the variable name in the location field, select the data space, enter 0FFh in the content field and check the write radio box.
Indicate that the break condition is meet if the variable is written as 0FFh
Step 3. Click Add button, the new breakpoint will be added into the Breakpoint ListBox
Step 4. Be sure to click OK button before exit.
Breakpoint Dialog (data)
Trace Condition(I)
Trace ModeNormal
Trace Main
Trace INT
Trace Condition(II)
Trigger ModeNo trigger
Trigger at condition A
Trigger at condition B
Trigger at condition A or B
Trigger at condition B after A
Trigger when meets condition A k times
Trigger at condition B after meet A k times
Start
Forward
30% 70%
Stop
Backward
Trigger
Logical View of Trace List
Trace Condition Dialog