introductionmeetingforinternational mechatronics winter ... › fileadmin › ... · international...
TRANSCRIPT
Introduction meeting for International MechatronicsWinter semester 2019 (for the students of the 3. semester)
Seite 2
Content
• Structure of the master course
• Lectures and examinations
• Master‘s Thesis
• Time table for winter 2019/2020 and summer 2020 semester
• Contacts
• General information
Quelle: www.alpha-ventus.de
Introduction meeting for International Mechatronics(for the students of the 3. semester)
Seite 3
STRUCTURE OF THE MASTER COURSEINTERNATIONAL MECHATRONICS
Seite 4
Structure of the master course at the LUH
Faculty of Mechanical Engineering
MechatronicsFaculty of Electrical Engineering and Computer Science
Seite 5
Structure of the master course at the LUHWinter semester 2019
October 2019 – March 2020
Elective courses (any 3)
Production of optoelectronic Systems
or Optical Measurement Technology
or Engineering Dynamics and Vibrations
or Continuum Mechanics I
or Micro- and Nano Systems
or Fundamentals and Configuration of Laser Beam Sources
or Power Electronics
Compulsory courses
Aspects of Process Design in Forming Technology
Electrical Drives
Project Thesis based on scientific and research work
Summer semester 2020
April 2020 – September 2020
Master’s Thesis:
Development + Presentations
Seite 7
Module Catalogue for the whole master program
• Can be downloaded fromhttps://www.maschinenbau.uni-hannover.de/de/studium/studienangebot-der-fakultaet/international-mechatronics-m-sc/
• Answers the following questions:
What is taught in the lecture?
Who is the main lecturer/contact person?
+ Additional information on the amount of credits, hours etc.
Seite 8
Courses of Leibniz Universität Hannover: Links
International Mechatronics at the course overview of the university
• https://qis.verwaltung.uni-hannover.de - the information overview with the different search functions for courses, departments, persons, rooms (facilities)
Answers the following questions:
When, Where is my lecture and Who is the lecturer?
What is the contact information to a person?
Seite 9
Courses at Leibniz Universität Hannover: Links Stud IP – the informational portal for students
• studip.uni-hannover.de
• access with your LUH student credentials (see instruction to the Online-Service Management from the University - IDM)
- download lecture materials- write messages to other students and groups- edit lecture-specific wiki-pages and more …..
Seite 10
Courses and exams – general information
• Each lecture course will be followed by an exam. The form of the exam (written or oral) is defined by the respective institute. Duration: written exam – 60-120 minutes, oral exam – 30 minutes.
• You don’t need to register officially for lectures, however registration to exams is obligatory.
• Attendance at lectures and practical exercises to the lectures are not obligatory but strongly recommended for the successful completion of a course
• Attending and actively participating in all the experiments of the laboratory “Mechatronics Lessons” is obligatory for all the students.
• Grades in German system: 1.0 – best grade, 4.0 – worst pass grade, 5.0 – exam failed. Between 1.0 and 4.0 the grades are given in steps: 1.0, 1.3, 1.7, 2.0, …4.0.
• All the scripts to the lectures, documentation to the practical exercises and laboratories as well as the organization information can be found in Stud-IP
Seite 11
Exams at Leibniz Universität Hannover: Registration
Online registration via student portal
Log into https://qis.verwaltung.uni-hannover.de with your LUH credentials
Login My Functions My Studies Exam Registration/Withdrawal …
• Deadlines can be found under the following link
https://www.maschinenbau.uni-hannover.de/de/studium/im-studium/pruefungen/
AND
Registration at the institute (for oral exams)
• In order to define the time of the oral examination with the professor
Seite 12
Scientific Research Work: “Mechatronics Lessons“
These laboratory lessons are compulsory.
They require rigorous preparation.
To enter the Stud.IP group search for the lesson name above and enter into the course.
Coordinator of Mechatronics Lessons
Eduard Popp (IMES)Telephone: 0511 762 19594E-Mail: [email protected]
• Please assign yourself to one group in the Stud.IP-course
• The schedule for the lab’s will follow when the grouping is finished
• Please gather 5min before the lab starts in front of the secretary’s office of the institutes
Topics of the Laboratories: Ball-on-Plate
Floating-Ball-Test
PLC-Controlled Rack Storage and Retrieval System
Kinematic Calibration of a Planar Parallel Roboter
Implementation of an Impedance Controller for a Joint
Your knowledge will be tested before and after each experiment. Please follow the instructions of the laboratory supervisor for details about how to prepare the experiments and writing the lab reports. If one experiment is missed or failed, the whole laboratory course will be failed!
Seite 13
Project Thesis at Leibniz Universität Hannover
• Project thesis is a research project with the credit amount = 5 CP. The size and the format of the thesis is defined by the supervisor.
• You are supervised by a research assistant of an institute of Leibniz Universität Hannover. You can choose topics freely from institutes of the Faculties for Electrical Engineering and Mechanical Engineering.
• The project thesis needs to be registered. The registration is normally performed by the supervisor. Please find the registration form here:
https://www.uni-hannover.de/de/studium/im-studium/pruefungsinfos-fachberatung/international-mechatronics/formulare/
• The results of the project thesis will be evaluated by the professor of the respective institute
• It is strongly recommended to begin the search of the project thesis topic from the very beginningof the winter semester!
• The topic of the project thesis and of the master thesis don’t have to be similar. The supervisors and the institutes can also be completely different.
Seite 14
MASTER‘S THESIS: SEARCH, DEVELOPING, PRESENTATION
Seite 15
Master‘s Thesis: Institutes (Leibniz Universität Hannover)
Electrical Engineering
• Institute for Drive Systems and Power Electronics (IAL)
• Institute of Automatic Control (IRT)
• Institute of Electrical Engineering and measurement Technology (GEML)
• Institute of Electrotechnology (ETP)
…
Computer Science
• Institute of Systems Engineering (RTS)
…
Mechanical Engineering
• Institute of Transport- and Automation Technology (ITA) – intensive cooperation with Prof. Shkodyrev
• Institute of Production Engineering and Machine Tools (IFW)
• Institute of Measurement and Automatic Control (IMR)
• Institute of Dynamics and Vibration Research (IDS)
• Institute for Metal Forming Technology (IFUM)
• Institute of Micro Production Technology (IMPT)
• Institute for Integrated Production (IPH)
• Institute of Mechatronic Systems (IMES)
• Institute of Assembly Technique (match)
• Institute of Material Science (IW)
• Laser Centre Hannover (LZH)
Faculty of Mechanical Engineering
MechatronicsFaculty of Electrical Engineering and Computer Science
Seite 16
Master‘s Thesis: Institutes
Faculty of Electrical Engineering and Computer Sciences
Faculty of Mechanical Engineering
How to search for theses:
• Homepage of the Institute Teaching/Education… Master theses/Projects ….(e-mail, Tel)
Example: http://www.irt.uni-hannover.de/theses.html
• E-mails to the scientific employees of the desired Institute, personal visits to the desired Institute
institutes might ask for CV and transcript of records to be able to assess students’ abilities
Faculty of Mechanical Engineering
MechatronicsFaculty of Electrical Engineering and Computer Science
Seite 17
Master‘s Thesis: Deadlines/Search of the topic
Choosing the theme for the master’s thesis
The master’s thesis has to be agreed upon with the Polytechnic University of St. Petersburg
(Prof. Shkodyrev, Control Systems and Technology Department) in the following items: Theme of the project
Names of the supervisors from the Polytechnic University St. Petersburg and from Leibniz Universität Hannover
Advice 1: Please consider your research work theme that you have been working on in SPbPU
Advice 2: in case you can’t contact your supervisor from Polytechnic University St. Petersburg please contact Elena Selivanova
Please send to SPbPU by e-mail your preliminary theme of the project and name of supervisor from Leibniz Universität Hannover by November 15, 2019
Decision on the Master’s degree theme: December 1, 2019
Final approval of Master’s degree theme – February 15. 2020
Reason: The topics for the master’s theses have to be sent to the Russian Ministry of Education in February.
Seite 18
Master‘s Thesis: Deadlines/Presentation
Developing of the master’s thesis
• The master’s thesis are entirely developed at Leibniz Universität Hannover at the chosen institute under supervision of a professor and a scientific assistant from that institute
• The registration (“Anmeldung”) of the theme of the master’s thesis at the examination office is performed usually by the supervisor (scientific assistant). Please see the next page for information about the first and the second examiner in the registration form
• Maximal/minimal duration of the master’s thesis development: 6/3 months
Seite 19
Master‘s Thesis: Supervisors and registration (formal)
Registration form
• The registration form can be downloaded under https://www.uni-hannover.de/de/studium/im-studium/pruefungsinfos-fachberatung/international-mechatronics/formulare/
• The first examiner is the professor of the respective institute of Leibniz Universität Hannover At which the master thesis is being developed
• The second examiner is the professor of the Polytechnic University of Saint-Petersburg (e.g. Shkodyrev)
Student of International Mechatronics
Professor of the institute(first examiner)
Professor of the institutee.g. Shkodyrev(second examiner)
Scientific assistant of the institute (Ph.D. student)
Leibniz Universität HannoverPolytechnic University of Saint-Petersburg
Scientific assistant of the institute
can be the same persongives the topic, evaluates the thesis
Regular intensive supervision on all the current results, controlling of the thesis text in details
Controlling of the topic and the thesis text for satisfying the requirements of Polytechnic University Saint-Petersburg
Seite 20
Master‘s Thesis: Deadlines/Presentation
Presentation of the master’s thesis
• Presentation has to be held in the Polytechnic University of St. Petersburg in English or Russian language. Presentation at the Leibniz Universität Hannover is not obligatory but recommended (presentation language: English or German)
• Deadline for completing all the curriculum (including laboratory, project thesis and all exams) at the Leibniz Universität Hannover : 1 month before the Master thesis presentation.
Reason: all the exams have to be entered onto the transcripts of records in time for the master thesis presentation
• At Polytech St. Petersburg you’ll have to pass the interdisciplinary exam, complete some formalities and perform the presentation: approximately 1 month is required (min. 2 weeks)
Advice: please contact Elena Selivanova for the detailed information about the preparation to the interdisciplinary exam
Seite 22
What happens if…
• An exam was failed during the winter exam session
The second attempt will take place in the summer exam session (end of July - September). As far as the most exams are oral it shouldn’t be a problem to choose a earlier time for this exam
The exam must be passed with this second attempt, otherwise no master degree from the Polytech St. Petersburg will be awarded
• In case the master thesis presentation is strongly recommended by the professor of the respective institute of the Leibniz Universität Hannover, but it can’t be held in August (e.g. professor is not there):
In this case the master thesis presentation can be held first in St. Petersburg and than (on returning to Germany) in Hannover
If the study at the Leibniz Universität Hannover will be extended to October 2020 the semesters fees have to be payed for winter semester 2020/2021
Seite 23
TIME TABLE AND DEADLINES
Seite 24
Time table winter semester 2019 – summer semester 2020
• Attending the obligatory courses
• Registration for the exams
• Find the master thesis project + supervisors (Leibniz Universität Hannover) - preliminary
• Decision on the joint master thesis theme
• Final approval of the master project theme
• Passing the examinations at Leibniz Universität Hannover
• Registration of your master’s thesis at Leibniz Universität Hannover
• Master’s thesis development during the next max. 6 months
• Send your passport copies to the Polytechnic University of St. Petersburg
• Presentation of the master’s thesis at LUH
• Return to Russia (Visa required!)
• Formalities, interdisciplinary exam (all other curriculum must be complete!)
• Presentation of the master’s thesis at SPbPU (2-4 weeks, with test)
Studying + Master‘s Thesis: Overview and Time Table
October 2019-January 2020
Deadline: will be published
15 November, 2019
1 December , 2019
Deadline: 15 February, 2020
February – March 2020
March 2020
March – August 2020
Deadline: 31 May 2020
August/ September 2020
September 2020
September 2020
Deadline: 15 September 2020
planned: January 8th -22nd
Seite 25
CONTACT PERSONS, WEBSITES, E-MAILS …
Seite 26
Contacts
• Coordinators of the International Mechatronics (Institute ITA):Björn Niemann Telephone: 0511 762 2423 E-Mail: [email protected]
• Study coordinator in general (Faculty of Mechanical Engineering)
Lisa Lotte Schneider Telephone: 0511 762 17519 E-Mail: [email protected]
• Admissions and Centre of Mechatronics
Marc WarneckeTelephone: 0511 762 4464
E-Mail: [email protected]
• International Office: Programme coordination Central and Eastern Europa
Nataliya ButychTelefon: +49 511 762 3702E-Mail: [email protected]
General contact:[email protected]
Seite 27
Important organizations (Leibniz Universität Hannover)
• Main website: www.uni-hannover.de
• Faculty of Mechanical Engineering: www.maschinenbau.uni-hannover.de
• Faculty of Electrical Engineering: www.et-inf.uni-hannover.de
• Enrollment office (Immatrikulationsamt): Main Building (Castle), Service-Center
• Examination office (Prüfungsamt): Main Building (Castle), F311
• International Office: www.international.uni-hannover.de
• Technical library (TIB): www.tib.eu
• Language center: Main Building (Castle), H1-Trakt www.fsz.uni-hannover.de
• Student Services (Studentenwerk): www.studentenwerk-hannover.de
Seite 28
Website of the programme
This presentation will be uploaded here!
www.mechatronik.uni-hannover.de Studies International Mechatronics
Programme FAQs
Seite 29
Fachrat Mechatronik (students‘ representative board)
www.fmec.uni-hannover.de
Get into contact with yourfellow students
Ask questions on how to learnand where to find alternative learning material
Ask for tips on how to enjoy yourstay in Hanover
Discuss your problems with otherStudents, who can maybe help
Seite 30
Orientation on Campushttps://standortfinder.uni-hannover.de
Enter building no., room no., or common name