invacare arrow chair

Yes, you can. ™

Storm Series®3G

(Elevating Seat included ESS6-STM)Arrow®

Ranger X™Torque™ SP/SE/3

Powered Wheelchairs

Parts Catalog Issued: Aug 20, 2009

The information contained in this document is subject to change without notice. This catalog containsservice parts for Form No. 00-191. If you have any questions regarding this catalog, please contact oneof our Customer Service Representatives.

For Customer Service Support Call:1-800-333-6900

For Faxed In Orders Call:1-800-678-4682 or

1-440-366-0709For Technical Service Call:

1-800-832-4707Literature Can Be Found at:

www.invacare.com or1-800-828-6272

SYMBOL DEFINITIONThroughout this catalog you will notice letters to draw your attention to specific footnotes which are located at thebottom of the page or below specified charts.

HARDWARE MEASUREMENTS

Examples:= Special Comments= General information pertaining to that specific page= No Longer Available

NOTE:NLA

The measurements for the hardware will be listed as follows:Screws, BoltsWashersSpacers

For your convenience, we have supplied an area for you to list your Invacare Representatives.

A,B,C etc.

Diameter X Thread Count/Pitch X LengthInside Diameter X Outside Diameter X ThicknessInside Diameter X Outside Diameter X Length

Name Phone Numbers

©2009 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., the Blue Medallion Design, Storm Series, Arrow, Tarsys are registered trademarks andMKIV, MK6i, Ranger X, Torque, and GB are trademarks of Invacare Corporation. Otto Bock is a registered trademark of Otto Bock Orthopaedische Industrie

GMBH & Co., Tash is a registered trademark of Tash International Inc., Therafin is a registered trademark of W/R/ Medical Electronics Co., Bussman is aregistered trademark of Cooper Industries., MIDI is a registered trademark of Littelfuse Inc., Dynamic is a registered trademark of Dynamic Controls Limited.

Parts Catalog Usage Guide

1Form No. 00-191 To order call toll free 1-800-333-6900, or www.invacare.com

A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!) ...................................................... 7

Accessories - Miscellaneous .................................................................................................... 229

Accessories - Oxygen Holder Assembly Kit - Captain Seat (After 4/14/03) ............................ 222

Accessories - Oxygen Holder Assembly Kit - Captain Seat (Before 4/15/03) ......................... 221

Accessories - Oxygen Holder Assembly Kit - ADJASBA Seats (After 7/4/05) ......................... 225

Accessories - Oxygen Holder Assembly Kit - ASBA Seats (Before 7/5/05) ............................. 224

Accessories - Power Wheelchair Tool Kit ................................................................................ 227

Anti-Tippers - 3" Wheel Assembly ........................................................................................... 136

Anti-Tippers - Extended Wheel Assembly ................................................................................ 138

Appearance - Label Locations For TRRO and TRBKTS Options ............................................ 13

Arms - Adj. Height - Seat Frames (16"-24" Wide by 16"-22" Deep) ........................................ 111Arms - Adj. Height - ASBA Seats (12-13" W x 12-15" D) (14-15" W x 12-22" D) & ADJASBASeats (12-16" W x 12-18" D) 106

Arms - Cantilever ...................................................................................................................... 121

Arms - Captain Seat & Hardware (18" Wide Models) .............................................................. 102

Arms - Captain Seat & Hardware (20" and 22" Wide Models) ................................................. 104

Arms - Fixed Height - Seat Frames (16"-24" Wide by 16"-22" Deep) ...................................... 108Arms - Mtg. Front/Rear Arm Socket Asbly. & Hdwr. For ADJASBA Seat (12"-16" Wide) (After7/4/05) 115Arms - Mtg. Front/Rear Arm Socket Asbly. & Hdwr. For ADJASBA Seats (16"-24" Wide) TRROOption 119Arms - Mtg. Front/Rear Arm Socket Asbly. & Hdwr. For ADJASBA/ADJRECL Seats (16"-24"Wide) (After 7/4/05) 117

Arms - Mtg. Swingaway Hdwr. For ASBA and ADJASBA/ADJRECL Seats ............................ 113

Back - Contoura - Mounting Hardware - ADJASBA Only ......................................................... 55

TABLE of CONTENTSDescription Page

Number

2To order call toll free 1-800-333-6900, or www.invacare.comForm No. 00-191

Back - Contoura - w/o Mounting Hardware .............................................................................. 53

Back - Curve Contoura without Mounting Hardware - After 5/14/09 ........................................ 57

Back - Mounting Hardware - Curve Contoura - After 5/14/09 .................................................. 90

Back - Recliner Assembly For ADJRECL Seat Frames (After 7/4/05) ..................................... 92

Back - Recliner Assembly For ASBA Seat Frames (Before 7/5/05) ......................................... 87

Battery Box & Tray Assembly - 22NF Batteries ....................................................................... 215

Battery Boxes & Support Frame - Group 24 Batteries ............................................................. 211

Battery Chargers - MK6i Battery Cables & Sensor Cables ...................................................... 209

Battery Chargers & MKIV Harnesses ....................................................................................... 206

Canes - Back - Attaching Hardware For ADJASBA Seat (12"-16" Wide) (After 7/4/05) .......... 68

Canes - Back - Attaching Hardware For ADJASBA Seat (16"-24" Wide) (After 7/4/05) .......... 77Canes - Back - Attaching Hardware For ADJASBA Seats (12"-16" W x 12"-15" D) (TRROOption) 70Canes - Back - Attaching Hardware For ADJASBA Seats (12"-16" W x 16"-18" D) (TRROOption) 72

Canes - Back - Attaching Hardware For ADJASBA Seats (16"-24" Wide) TRRO Option ........ 79Canes - Back - Spreader Bars & Attaching Hardware For ASBA Seats (12"-24" Wide) (Before7/5/05) 61

Canes - Back - Spreader Bars For ADJASBA Seat (12"-16" Wide) (After 7/4/05) ................... 66

Canes - Back - Spreader Bars For ADJASBA Seat (16"-24" Wide) (After 7/4/05) ................... 74

Casters & Forks (6" Assembly) ................................................................................................ 187

Casters & Forks (8" and 9" Assemblies) .................................................................................. 184

Documentation - TRRO and TRBKTS Option Clarification Reference ..................................... 14

Electronics - MK6i ~PLEASE READ THIS SECTION~ ............................................................ 205


Number


Electronics - MKIV ~PLEASE READ THIS SECTION~ ........................................................... 204

Elevating Seat Option - Battery Tray, Proximity Sensor and Hardware ................................... 217

Elevating Seat Option - Elevating Actuator, Switch Sensor and Hardware .............................. 219

Fender Assembly ..................................................................................................................... 203

Frame - Base ............................................................................................................................ 124

Frame - Hardware - Base Interface - Formula CG Powered Seating w/ TRBKTS Option ...... 128

Frame - Hardware - Base Interface - ADJASBA Seat w/ TRRO/TRBKTS Option ................... 126

Frame Finishes - Touch-Up Paints & Upholstery Options ........................................................ 8

Frames - Captain Seat & Actuator Hardware (After 10/31/01) ................................................. 36

Frames - Captain Seat & Actuator Hardware (Before 11/1/01) ................................................ 34Frames - Hardware - Seat Mtg. - ASBA (12"-15" Wide) - ADJASBA Seats & TRBKTS Option(12"-16" Wide) 38

Frames - Hardware - Seat Mtg. - ADJASBA Seats with TRRO Option (16"-24" Wide) ........... 46Frames - Hardware - Seat Mtg. - ADJASBA/ADJRECL (16"-24" Wide) (After 7/4/05) &TRBKTS Option 44

Frames - Hardware - Seat Mtg. - ASBA (16"-24" Wide) (Before 7/5/05) .................................. 42Frames - Hardware - Seat Mtg. - Elevating Seat Option - ADJASBA (16"-22" Wide) (After7/4/05) 28Frames - Hardware - Seat Mtg. - Elevating Seat Option - ASBA (16"-22" Wide) (Before 7/5/05)& Captain Seat 26

Frames - Hardware - Seat Mtg. (12"-16" Wide) ADJASBA Seats with TRRO Option .............. 40

Frames - Seat - ADJASBA, Seat Pan & Hdwr. (12"-16" Wide) (After 7/4/05) .......................... 17

Frames - Seat - ADJASBA/ADJRECL, Seat Pan & Hdwr. (16"-20" W x 16"-22" D) (After 7/4/05) 22

Frames - Seat - ADJASBA/ADJRECL, Seat Pan & Hdwr. (20"-24" W x 16"-22" D) (After 7/4/05) 24

Frames - Seat - ASBA & Hardware (12"-15" Wide) (Before 7/5/05) ........................................ 15


Number


Frames - Seat - ASBA & Hardware (16"-24" Wide) (Before 7/5/05) ........................................ 19

Front Rigging - PLEASE READ THIS SECTION - ................................................................... 140

Motor/Gearbox Asbly. Ref. Chart - MK6i Electronics (4-Pole After 10/8/06) & (GB After 5/21/07) 147Motor/Gearbox Asbly. Ref. Chart - MKIV Electronics (4-Pole Before 10/9/06) & (GB Before5/22/07) 141

Motors - 4 Pole & Gearboxes For MK6i Electronics (After 10/8/06) ......................................... 156

Motors - 4 Pole & Gearboxes For MKIV Electronics (Before 10/9/06) ..................................... 151

Motors - GB - Reference Chart - Warranty Replacement ........................................................ 183

Motors - GB (TrueTrack) Non-Heavy Duty Motors & Hdwr. For MKIV Electronics Only .......... 163

Motors - GB Connector Covers ................................................................................................ 181Motors - GB HD (TrueTrack) Motors & Hdwr. For Both MKIV Elec.'s (Before 5/22/07 & MK6iAfter 5/21/07) 169

Packaging - Carton - Bag - Literature - Decals ........................................................................ 10

Seat - Captain Seat Assembly (After 10/31/01) ....................................................................... 32

Seat - Captain Seat Assembly (Before 11/1/01) ...................................................................... 30

Seat Cushion - Contoura - ADJASBA Only .............................................................................. 52

Seat Pans & Attaching Hardware - For ASBA Seat (Before 7/5/05) ........................................ 48

Shock Absorbers ...................................................................................................................... 130

Shock Suspension Mounting Hardware ................................................................................... 131

Suspension Arm & Mounting Hardware - 4-Pole Motors .......................................................... 132

Suspension Arm & Mounting Hardware - Gearless/ Brushless ................................................ 134

Upholstery - Back - Nylon (Non-Recliner) ................................................................................ 81

Upholstery - Back - Recliner - Nylon ........................................................................................ 96


Number


Upholstery - Back - Recliner - Vinyl .......................................................................................... 98

Upholstery - Back - Vinyl (Non- Recliner) ................................................................................ 84

Upholstery - Headrest & Pillows ............................................................................................... 100

Wheel Lock Assembly - 4 Pole Motors ..................................................................................... 200

Wheel Lock Assembly - Gearless/Brushless ............................................................................ 201

Wheels - Drive for Free Wheel Hubs (4-Pole Motors Only) ..................................................... 191

Wheels - Drive for GB TrueTrack Heavy Duty (TTHD) Motors ................................................ 193

Wheels - Drive for Non-Free Wheel Hubs (4 Pole & GB Non-Heavy Duty Motors) ................. 189

Wheels - Free Hub Kits (4 Pole Motors Only) .......................................................................... 198

Wheels - Free Hub Mount & Hardware (4-Pole Motors Only) .................................................. 197

Wheels - Non-Free Hub Mount & Hardware (4-Pole & GB Non-Heavy Duty Motors) .............. 195


Number


A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!)


Frame Finishes, Touch-Up Paints and Upholstery Options

Frame Finishes and Touch-Up Paint

Color Number Part Number Bottle Size Frame FinishDeep Purple.6 oz.103145608PCobalt Blue.6 oz.104631917PAnthracite.6 oz.103337622PWet Black.6 oz.103145024P

White.6 oz.103144729PSunny YellowN/AN/A30P

Red.6 oz.103145533PFlat Black.6 oz.104632734P

Silver MetallicN/AN/A60PElectric Red.6 oz.104632161PElectric Blue.6 oz.104632062P

Electric Purple.6 oz.104632266PTeflon Black.6 oz.1101320-NLA69PSilver VeinN/AN/A71P

Evergreen with Navy.6 oz.107389280PRoyal Blue with Grape.6 oz.107389583P

Lavender.6 oz.107389684PJeweled Green.6 oz.1101325101P

Denim Blue.6 oz.1101327102PMocha Frost.6 oz.1101324103PElectric Teal.6 oz.1101316104P

MIdnight Blue.6 oz.1101326105PBlack Prism.6 oz.1133371115P

Sunkissed Orange.6 oz.1133372116PTangerine Red.6 oz.1133373117P

Fruit Fusion.6 oz.1133374118PBubblegum Pink.6 oz.1133375119PGrape Madness.6 oz.1133376120PLolly Pop Blue.6 oz.1133377121PCosmic Blue.6 oz.1133378122P

Celestial Purple.6 oz.1133379123PVivid Violet.6 oz.1133380124P

Emerald Green.6 oz.1133381125PShamrock Green.6 oz.1133382126P

Grasshopper Green.6 oz.1133383127P


Frame Finishes, Touch-Up Paints and Upholstery Options

Sparkle Frame Finishes

Color Number Frame FinishWet Black with Twilight Sparkle88P

Upholstery Options

Vinyl Color Nylon Color U240 BlackU67 Black


Packaging, Literature and Decals


Packaging, Literature and DecalsItem

Number Part Number DescriptionNoteQuantity Per

Package Assembly1030364 Carton, Cover 1 11 A1031682 Carton, Cover 1 11 B1036028 Carton, Cover 1 11 C1030365 Carton, Cover 1 11 D

1043198-NLA Tube, Paper 1 121015609-NLA Bag, Poly (28" W x 44" D x 80" H) 1 13

1030362 Carton, Tray 1 24 H1036027 Carton, Tray 1 24 ISee Note See Footnote 1 15 K1021149 Bag, Poly Zip-Lip (13" L x 9" W) 1 161134791 Owner's Manual, 3G Storm with MKIV Electronics 1 171143151 Owner's Manual, 3G Storm Base with MK6i

Electronics1 17

1143192 Owner's Manual, ADJASBA Seat with MK6iElectronics

1 171143195 Owner's Manual, Van Seat's with MK6i Electronics 1 17

00077X031 Warranty Card 1 1850000X121 Strap, Battery Lift 1 19

1012001 Carton, Joystick 1 11040131X161 Insert, Plain Pad 1 111

1035900 Decal, Transportation 1 1121119281 Plate, Name, Patent Numbers 1 1131133255 Decal, Torque SP, Yellow 1 2141144627 Decal, Torque SP, Black 1 214 L

1146486-NLA Decal, Torque SE, Yellow 1 2141146487-NLA Decal, Torque SE, Black 1 214 L

1151551 Decal, Torque 3, Yellow 1 2141151552 Decal, Torque 3, Black 1 214 L1133253 Decal, Yellow - Arrow 1 2141144625 Decal, Black - Arrow Storm 1 214 L1133254 Decal, Yellow - Ranger X 1 2141144626 Decal, Black - Ranger X 1 214 L1115174 Carton, Corner Reinforcement 1 215 A1129589 Carton, Corner Reinforcement 1 215 B1129590 Carton, Corner Reinforcement 1 215 C1104820 Package, Decal, Yellow - Torque SP 1 1F,G1144630 Package, Decal, Black - Torque SP 1 1F,G,L

1146488-NLA Package, Decal, Yellow - Torque SE 1 1F,G1146489-NLA Package, Decal, Black - Torque SE 1 1F,G,L

1151553 Package, Decal, Yellow - Torque 3 1 1F,G1151554 Package, Decal, Black - Torque 3 1 1F,G,L1104818 Package, Decal, Yellow - Arrow 1 1F,G1144628 Package, Decal, Black - Arrow 1 1F,G,L1104819 Package, Decal, Yellow - Ranger X 1 1F,G


Packaging, Literature and DecalsItem


Package Assembly1144629 Package, Decal, Black - Ranger X 1 1F,G,L1079515 Kit, T-Nut with Instruction Sheet 1 1E,G1104863 Package, Cover, Frame Rail - Right/Left 6 1G,J

A - 12" W - 20" W Non-Recliner, Extended and H.B. Captain Seats 18" W B - 16" W - 20" W Recliner and 16" W - 20" W Non-Recliner w/Medium/Tall Seat-to-Floor C - 21" W - 24" W Non-Recliner and Recliner, H.B. Captain Seat 22" W D - Base only and all A.S.B.A. seat only models E - Used with Storm base only F - Decal package includes 2 ea. model, 1 ea. transportation and 1 ea patent numbers decals. G - Not Shown H - 12" W - 20" W Chairs and Base Only I - 21" W - 24" W Chairs J - 3 each Right and Left K - Skid not supplied L - Black Decal is used whenever frame color 30P, Sunny Yellow is ordered.

NOTE: When adjusting or replacing parts, please refer to your Owner's Manual for assistance.

NOTE:


Label Locations For TRRO and TRBKTS Options


TRRO and TRBKTS Option Clarification ReferenceTRRO and TRBKTS Option was introduced 12/19/05 as an On-Chair option only.


ASBA Seat Frame and Hardware(12"-15" Wide) (Before 7/5/05)

The 16" wide setting is not used for 3G Storm Series models



The 16" wide setting is not used for 3G Storm Series modelsItem


Package Assembly1037610 Screw, Hex Head (1/4-20 x 1-5/8") 1 411026099 Spacer, Coved (1/4 x 11/16 x 1/2") 1 421047449 Spacer (1/4 x 3/8 x 3/16") 1 431025736 Locknut (1/4-20) 1 44

47471X074 Spring, Arm Lock 1 151028594 Pin, Arm Lock, Black 1 151090768 Kit, Lock Handle w/Rivets (Pair) 2 15

See Chart #'s 6-8 ASBA Seat Frame and Hardware 1 16-8

#'s 6-8 Seat Frames

ItemNumber

14"-15" W20"-21" D

14"-15" W22" DDescription 12"-13" W

12"-15" D14"-15" W12"-15" D

14"-15" W16"-17" D

14"-15" W18"-19" D

107053010705281070526107047310704731070473Seat Frame

Right

6See Note(s) A

107053110705291070527107047410704741070474Seat Frame

Left

6See Note(s) A

107053310705331070476107047610704761070476Seat FrameCenter7

107053610705351070534107046910704691070469Seat FrameAssembly

8

See Note(s) BA - Seat frame includes item 5 arm lock assembly. B - Includes items 1-7

NOTE:


ADJASBA Seat Frame, Seat Pan and Hardware(12"-16" Wide) (After 7/4/05)


ADJASBA Seat Frame, Seat Pan and Hardware(12"-16" Wide) (After 7/4/05)

ItemNumber Part Number DescriptionNote

Quantity PerPackage Assembly

1121982 Frame, Center Seat, Black 1 111070475 Frame w/o CTMT Brackets, Center Seat, Black 1 11 C1126126 Crossbar, Seat Frame (12 - 16" W) 1 421126127 Rail, Side (12 - 18" D) 1 231126144 Pan, Seat, with Hook and Loop Fasteners (12 - 16"

W x 12 - 18" D)1 14 A

1039949 Fastener, Hook Adhesive Back (2" W x 16" L) 1 451044578 Fastener, Loop Adhesive Back (2" W x 16" L) 1 451135500 Kit, Seat Frame Assembly Hardware 12"-16" Wide 1 16 D,B

Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 87Washer (1/4 x 1/2 x 1/16") 1 48Spacer, Coved (1/4 x 11/16 x 1/2") 1 49Locknut (1/4-20) 1 310Plug Button, Black (1") 1 211Screw, Socket Button Head (1/4-20 x 1-1/2") 1 312

1134425 Package, Plug Button, Black (1") 10 111A - Includes item 5 B - Includes items 7-12 C - Center Seat Frame without CTMT Rigging Brackets is used only when ELRPW Front Riggings are ordered for Mk6i

electronics in order to attach the Dual Leg Integrated Actuator Module (DLIAM). D - item 11 Plug Buttons are not used and only a quantity of 2 for item #12 is required for the Center Seat Frame w/o CTMT

Rigging Brackets

NOTE:



#1 Seat Frame with HardwareNon-Recliner

Chair Width 16"-17" Depth 18" - 19" Depth 20" - 21" Depth 22" Depth107069910706901070681107067216" Width107070010706911070682107067317" Width107070110706921070683107067418" Width107070210706931070684107067519" Width107070310706941070685107067620" Width107070410706951070686107067721" Width107070510706961070687107067822" Width107070610706971070688107067923" Width107070710706981070689107068024" Width

#1 Seat Frame with HardwareRecliner

Chair Width 16"-17" Depth 18" - 19" Depth 20" - 21" Depth 22" Depth107073510707261070717107070816" Width107073610707271070718107070917" Width107073710707281070719107071018" Width107073810707291070720107071119" Width107073910707301070721107071220" Width107074010707311070722107071321" Width107074110707321070723107071422" Width107074210707331070724107071523" Width107074310707341070725107071624" Width





See Chart #1 Seat Frame with Hardware - Non-Recliner 1 11 ASee Chart #1 Seat Frame with Hardware - Recliner 1 11 A1029501 Plug Button, Black (1") 1 221090768 Kit, Lock Handle w/Rivets (Pair) 2 13

47471X074 Spring, Arm Lock 1 241028594 Pin, Arm Lock, Black 1 25

A - Includes seat frame and items 2-5 NOTE:


ADJASBA/ADJRECL Seat Frame, Seat Pan and Hardware(16"-20" Wide) x (16"-22" Deep) (After 7/4/05)





1120288 Frame, Center Seat, Black 1 11 D1122475 Crossbar, Seat Frame (16 - 20" W) 1 421122647 Rail, Seat Frame (16 - 20" D For Formula TRE and

16 - 19" D For ADJASBA)1 23

1122677 Rail, Seat Frame (20 - 22" D Formula TRE) (19 -22" D ADJASBA)

1 231124386 Pan, Seat with Hook and Loop Fasteners (16 - 20"

W) x (16 - 20" D For Formula TRE) & (16 - 19" DFor ADJASBA)

1 14

1124666 Pan, Seat, with Hook and Loop Fasteners (16 - 20"W) x (20 - 22" D For Formula TRE) & (19 - 22" DFor ADJASBA)

1 14

1043082 Hook Fastener with Adhesive Back (2" W x 18" L) 1 25 A1044580 Loop Fastener, Adhesive (2" x 18") 1 25 A1043084 Hook Fastener with Adhesive back (2" W x 22" L) 1 25 B1044584 Loop Fastener, Adhesive (2" x 22") 1 25 B1135501 Kit, Seat Frame Assembly Hardware 1 16 C

Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 87Washer (1/4 x 1/2 x 1/16") 1 28Spacer, Coved (1/4 x 11/16 x 1/2") 1 49Screw, Socket Button (1/4-20 x 3/4") 1 210Pin, Roll (3/16 x 1") 1 211

1114823 Decal, Seat Adjustment Warning 1 212A - For 16"-19" deep seats B - For 19"-22" deep seats C - Includes items 7-11 D - When ordering Center Seat Frame (item 1), also order 2 ea. Seat Adjustment Warning Decal (item 12).

NOTE:





1120288 Frame, Center Seat, Black 1 11 D1120283 Crossbar, Seat Frame (20 - 24" W) 1 421122647 Rail, Seat Frame (16 - 20" D For Formula TRE and

16 - 19" D For ADJASBA)1 23

1122677 Rail, Seat Frame (20 - 22" D Formula TRE) (19 -22" D ADJASBA)

1 231124388 Pan, Seat, with Hook and Loop Fasteners (20 - 24"

W) x (16 - 20" D For Formula TRE) & (16 - 19" DFor ADJASBA)

1 14

1124667 Pan, Seat with Hook and Loop Fasteners (20 - 24"W) x (20 - 22" D For Formula TRE) & (19 - 22" DFor ADJASBA)

1 14

1043082 Hook Fastener with Adhesive Back (2" W x 18" L) 1 25 A1044580 Loop Fastener, Adhesive (2" x 18") 1 25 A1043084 Hook Fastener with Adhesive back (2" W x 22" L) 1 25 B1044584 Loop Fastener, Adhesive (2" x 22") 1 25 B1135501 Kit, Seat Frame Assembly Hardware 1 16 C

Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 87Washer (1/4 x 1/2 x 1/16") 1 28Spacer, Coved (1/4 x 11/16 x 1/2") 1 49Screw, Socket Button (1/4-20 x 3/4") 1 210Pin, Roll (3/16 x 1") 1 211

1114823 Decal, Seat Adjustment Warning 1 212A - For 16"-19" deep seats B - For 19"-22" deep seats C - Includes items 7-11 D - When ordering Center Seat Frame (item 1), also order 2 ea. Seat Adjustment Warning Decal (item 12).

NOTE:


(ASBA Seat Before 7/5/05) and Captain Seat FrameMounting Hardware

For Elevating SeatDiscontinued 10/16/06. No longer offered on Van Seats for 3G Storm Series


(ASBA Seat Before 7/5/05) and Captain Seat FrameMounting Hardware

For Elevating SeatDiscontinued 10/16/06. No longer offered on Van Seats for 3G Storm Series



1043627 Screw, Hex Head w/ Patch (5/16-18 x 1-3/4") 1 411039860 Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 227930337 Package, Screw, Hex Head w/ Patch (5/16-18 x

1-1/4")25 43

1106521 Bracket, Seat Frame Support, Black 1 241026158 Locknut (5/16-18) 1 1251106522 Bracket, Seat Frame Mounting, Black 1 161065215 Screw, Socket Button Head w/ Patch (5/16-18 x

3/4")1 27

1108224 Hardware, Seat Frame Mounting 1 18 AA - Includes items 1-7 NOTE:


ADJASBA Seat Frame Mounting HardwareFor Elevating Seat (16"-22" Wide) (After 7/4/05)

Discontinued 10/16/06. After 10/15/06, Refer to Formula CG Powered Seating System Parts Catalog Form#06-106 for the Elevate Option components for 3G Storm Series.


ADJASBA Seat Frame Mounting HardwareFor Elevating Seat (16"-22" Wide) (After 7/4/05)




1134496 Kit, Seat Frame Mounting Hardware - Elevate 1 11 AScrew, Socket Head (5/16-18 x 3/4") 1 42Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 23Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") 1 44Bracket, Seat Frame Support, Black 1 25Locknut (5/16-18) 1 86Bracket, Seat Frame Mounting, Black 1 17Screw, Socket Button Head w/ Patch (5/16-18 x3/4")

1 28Locknut (5/16-18) 1 49

A - Includes items 2-9 NOTE:


Captain Seat Assembly(Before 11/1/01)

NOTE: Captain Seats incorporate an assisted recline of approximately 90 -114 degrees for extendedbacks and high back 22" wide models. High back 18" models are 90-170 degrees.


Captain Seat Assembly(Before 11/1/01)

NOTE: Captain Seats incorporate an assisted recline of approximately 90 -114 degrees for extendedbacks and high back 22" wide models. High back 18" models are 90-170 degrees.

ItemNumber

Backrest/HeadrestExtensions and

CaptainSeat Assemblies

Grey FabricVinyl

All GreyVinyl

Brunswick BuffAll Tan Vinyl

1090376-NLA1090375-NLA

1090374-NLA

Backrest, Extended Back1. See Note(s) A See Note(s) A

N/AN/A1090374-NLA

Backrest, Extended Back Forward Folding

1.See Note(s) A

N/A1090380-NLA

1090379-NLA

Headrest, High Back

(18 and 22" W)2.

See Note(s) A See Note(s) A1090373-NLA

1090372-NLA

1090371-NLA

18" W

Extended Back3. See Note(s) C See Note(s) C See Note(s) C

N/AN/A1090370-NLA

18" W Extended BackForward Folding

3.See Note(s) C

N/A1091069-NLA

1091068-NLA

18" W High Back

w/ Full Recline3.

See Note(s) C, B See Note(s) C

N/AN/A1098287-NLA22" W

High Backw/ Semi Recline

3.A - 4-3/4" Backrest/Headrest Post Spacing B - High back 18" wide captain seat includes all actuator attaching hardware C - For captain seats marked NLA, use captain seats dated after 10/31/01

NOTE:

NOTE: When converting from an extended back captain seat to an 18" wide high back captain seat, the recliner wiring harness with sensorcable must be ordered as well.


Captain Seat Assembly (After 10/31/01)

NOTE: Captain Seats recline approximately 90-114 degrees for semi recline backs and 90-170 degree forfull recline back models. Adjustable depths are (16, 17, 18" deep for 18" wide seats) and (18, 19, 20" deepfor 20 and 22" wide seats.) Recline release levers are standard on the right side. Left side release levers

can be ordered as a special with a new captain seat.


Captain Seat Assembly (After 10/31/01)

NOTE: Captain Seats recline approximately 90-114 degrees for semi recline backs and 90-170 degree forfull recline back models. Adjustable depths are (16, 17, 18" deep for 18" wide seats) and (18, 19, 20" deepfor 20 and 22" wide seats.) Recline release levers are standard on the right side. Left side release levers

can be ordered as a special with a new captain seat.

ItemNumber

Backrest/HeadrestExtensions and Captain Seat Assemblies

All Grey Fabric All Grey Vinyl All Tan Vinyl

110696811084081106969Backrest(Semi Recline)1.

110696611084091106967Headrest(For Full Recline)2.

11092481109242110925418" Wide

Semi Reclinewith Backrest

3.

11092511109245110925718" Wide

Full Recline with Headrest

3.

11598931159891115989220" Wide


3.

11092521109246110925820" Wide

Full Reclinewith Headrest

3.

11092501109244110925622" Wide


3.

11092531109247110924722" Wide

Full Reclinewith Headrest

3.NOTE: When coverting from a semi recline to a full recline captain seat, a sensor cable must be ordered as well.NOTE: Actuator mounting hardware is not included with a full recline captain seat. See Actuator mounting hardware.NOTE: New seat mounting hardware is required when converting a captain seat made before 11/01/01 to a captain seat made after 10/31/01.


Captain Seat Frame and Actuator Hardware(Before 11/01/01)


Captain Seat Frame and Actuator Hardware(Before 11/01/01)



1030949 Screw, Hex Head (1/4-20 x 1-1/2") 1 611026900 Washer (1/4 x 23/32 x 1/16") 1 621071603 Screw, Hex Head w/ Patch (M6 x 1 x 20mm) 1 43 B1045267 Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 43 C7930333 Locknut (1/4-20) 25 641026099 Spacer, Coved (1/4 x 11/16 x 1/2") 1 451070434 Screw, Hex Head w/ Patch (M6 x 1 x 50mm) 1 26 B1088898 Screw, Hex Head w/ Patch (1/4-20 x 1-3/4") 1 26 C1047449 Spacer (1/4 x 3/8 x 3/16") 1 471070450 Hardware, Seat Attaching 1 18 A,B1079208 Hardware, Captain Seat Mounting 1 18 A,C1070455 Frame, Seat, Black (18" W) 1 19 D1101913 Frame, Seat, Black (22" W) 1 19 E

1098624-NLA Clamp, Cable 1 1101024001 Sensor, Actuator Switch 1 111

16348X007 Rivet Washer (1/8 x 3/8 x 1/16") 1 2121074128 Screw, Phillips Pan Head (#4-40 x 7/16") 1 213

P0870X000 Nut, Hex Keps (#4-40) 1 2141025116 Screw, Slotted Hex Washer Head Tap (#4-3/8") 1 3151008525 Washer, Internal Tooth Lock (#4-40) 1 316

A - Consists of items 1-7 B - All high backs 18" wide C - Extended backs, forward folding and high backs 22" wide D - Extended backs, forward folding and high backs 18" wide E - High backs 22" wide

NOTE:


Captain Seat Frame and Actuator Hardware(After 10/31/01)


Captain Seat Frame and Actuator Hardware(After 10/31/01)



1070455 Frame, Seat, Black (18" W) 1 111108099 Frame, Seat, Black (20" W) 1 111101913 Frame, Seat, Black (22" W) 1 111108411 Spacer (1/4 x 5/8 x 3/8") 1 227930333 Locknut (1/4-20) 25 631030949 Screw, Hex Head (1/4-20 x 1-1/2") 1 641108410 Spacer (1/4 x 5/8 x 1/4") 1 251026099 Spacer, Coved (1/4 x 11/16 x 1/2") 1 461026154 Screw, Hex Head (1/4-20 x 2-1/4") 1 271047449 Spacer (1/4 x 3/8 x 3/16") 1 481021406 Screw, Hex Head (1/4-20 x 1-1/4") 1 291026900 Washer (1/4 x 23/32 x 1/16") 1 4101079208 Hardware, Captain Seat Mounting 1 111 B1008525 Washer, Internal Tooth Lock (#4-40) 1 4127930339 Package, Screw, Phillips Pan Head (#4-40 x 3/8") 25 413

P0870X000 Nut, Hex Keps (#4-40) 1 2141024001 Sensor, Actuator Switch 1 1151107242 Hardware, Actuator Switch Sensor Mounting 1 116 A

A - Includes items 12-15 B - Includes items 2-10

NOTE:


Seat Frame Mounting Hardware(12"-15" Wide ASBA), (12"-16" Wide ADJASBA Seats & TRBKTS Option)

NOTE: The ASBA and ADJASBA seat frame assemblies use the same mounting hardware.


Seat Frame Mounting Hardware(12"-15" Wide ASBA), (12"-16" Wide ADJASBA Seats & TRBKTS Option)

NOTE: The ASBA and ADJASBA seat frame assemblies use the same mounting hardware.Item


Package Assembly1042484 Screw, Hex Head (5/16-18 x 2") 1 411070462 Screw, Hex Head w/ Patch (5/16-18 x 7/8") 1 421026158 Locknut (5/16-18) 1 831070465 Bracket, Mounting, Black - Junior 1 241070462 Screw, Hex Head w/ Patch (5/16-18 x 7/8") 1 451025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 1261043627 Screw, Hex Head w/ Patch (5/16-18 x 1-3/4") 1 471070388 Support, Seat, Black 1 281069724 T-Nut (5/16-18) 1 491070396 Strap, Bolt, Black 1 2101079247 Washer, Flat (21/64 x 53/64 x 7/64") 1 4111104428 Plate, Low Seat Mounting - Right 1 112 B1104429 Plate, Low Seat Mounting - Left 1 112 B1104430 Plate, Medium Seat Mounting - Right 1 112 C1104431 Plate, Medium Seat Mounting - Left 1 112 C1104432 Plate, Tall Seat Mounting - Right 1 112 D1104433 Plate, Tall Seat Mounting - Left 1 112 D1104765 Hardware, Seat Frame Mounting 1 113 A,E

A - Item number 12 not included B - Low 17-1/2" Seat to Floor C - Medium 19-3/4" Seat to Floor D - Tall 21-1/2" Seat to Floor E - Includes items 1-11

NOTE:


Seat Frame Mounting Hardware(12"-16" Wide) ADJASBA Seats with TRRO Option





1140261 Kit, Seat Frame Mounting Hardware 12"-16" WideFor TRRO Option

1 11 AScrew, Hex Head (5/16-18 x 2") 1 42Washer, Flat (21/64 x 53/64 x 7/64") 1 123Locknut (5/16-18) 1 84Screw, Hex Head (5/16-18 x 1") 1 45Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 46Washer, Flat (5/16 x 5/8 x 1/16") 1 47

1070465 Bracket, Mounting, Black - Junior 1 281135964 Bracket, Seat Mounting Low, Black - Right 1 191135965 Bracket, Seat Mounting Low, Black - Left 1 19



Seat Frame Mounting Hardware(16"- 24" Wide) ASBA (Before 7/5/05)


Seat Frame Mounting Hardware(16"- 24" Wide) ASBA (Before 7/5/05)



1043627 Screw, Hex Head w/ Patch (5/16-18 x 1-3/4") 1 41 A1070398 Screw, Hex Head (5/16-18 x 1-1/2") 1 41 B1070413 Spacer (21/64 x 1/2 x 17/64") 1 42 A1043627 Screw, Hex Head w/ Patch (5/16-18 x 1-3/4") 1 431025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 1241070388 Support, Seat, Black 1 251069724 T-Nut (5/16-18) 1 461070462 Screw, Hex Head w/ Patch (5/16-18 x 7/8") 1 471026158 Locknut (5/16-18) 1 481070396 Strap, Bolt, Black 1 291104428 Plate, Low Seat Mounting - Right 1 110 D1104429 Plate, Low Seat Mounting - Left 1 110 D1104430 Plate, Medium Seat Mounting - Right 1 110 E1104431 Plate, Medium Seat Mounting - Left 1 110 E1104432 Plate, Tall Seat Mounting - Right 1 110 F1104433 Plate, Tall Seat Mounting - Left 1 110 F1104764 Hardware, Seat Frame Mounting (16" W) 1 111 C,G1104763 Hardware, Seat Frame Mounting (17" W and Wider) 1 111 C,G

A - Part number 1043627 and 1071413 are used on the 16" wide chairs only B - Part number 1070398 is used on 17" and wider chairs only C - Item number 10 not included D - Low 17-1/2" Seat to Floor E - Medium 19-3/4" Seat to Floor F - Tall 21-1/2" Seat to Floor G - Includes items 1-9

NOTE:


Seat Frame Mounting Hardware(16"- 24" Wide) ADJASBA/ADJRECL (After 7/4/05) & TRBKTS Option


Seat Frame Mounting Hardware(16"- 24" Wide) ADJASBA/ADJRECL (After 7/4/05) & TRBKTS Option



1134493 Kit, Seat Frame Mounting Hardware 1 11 AScrew, Socket Head (5/16-18 x 3/4") 1 42Screw, Hex Head w/ Patch (5/16-18 x 1-3/4") 1 43Washer, Flat (5/16 x 5/8 x 1/16") 1 124Support, Seat, Black 1 25T-Nut (5/16-18) 1 46Screw, Hex Head w/ Patch (5/16-18 x 7/8") 1 47Locknut (5/16-18) 1 48Strap, Bolt, Black 1 29

1104428 Plate, Low Seat Mounting - Right 1 110 B1104429 Plate, Low Seat Mounting - Left 1 110 B1104430 Plate, Medium Seat Mounting - Right 1 110 C1104431 Plate, Medium Seat Mounting - Left 1 110 C1104432 Plate, Tall Seat Mounting - Right 1 110 D1104433 Plate, Tall Seat Mounting - Left 1 110 D

A - Includes items 2-9 and used for ADJASBA and ADJRECL Seat Frames B - Low = 17-1/2" Seat-To-Floor C - Med = 19-3/4" Seat-To-Floor D - Tall = 21-1/2" Seat-To-Floor

NOTE:





1135970 Kit, Seat Frame Mounting Hardware 16"-24" WideFor TRRO Option

1 11 AScrew, Socket Head w/ Patch (5/16-18 x 1") 1 42Washer, Ground (11/32 x 13/16 x 1/8") 1 63Washer, Flat (21/64 x 53/64 x 7/64") 1 24Locknut (5/16-18) 1 25Plate, Nut (5/16-18) 1 26Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 47Washer, Flat (5/16 x 5/8 x 1/16") 1 48Screw, Socket Head (5/16-18 x 1-1/4") 1 29

1135964 Bracket, Seat Mounting Low, Black - Right 1 1101135965 Bracket, Seat Mounting Low, Black - Left 1 110



Seat Pan and Attaching HardwareFor ASBA Seat (Before 7/5/05)



#1 Seat Pan12"-18" Depth

Chair Width 12"-15" Deep 16" Deep 17" Deep 18" DeepN/AN/A1070513106600912" WN/AN/A1070514106601013" W

106603310660221066011106602214" W106603410660231066012106602315" W106603510660241066013106602416" W106603610660251066014N/A17" W106603710660261066015N/A18" W106603810660271066016N/A19" W106603910660281066017N/A20" W106604010660291066018N/A21" W106604110660301066019N/A22" W106604210660311066020N/A23" W106604310660321066021N/A24" W

12-15" seat depths are achieved by using CJ back cane mounting hardware.



#1 Seat Pan19"-22" Depth

Chair Width 19" Deep 20" Deep 21" Deep 22" Deep106607710660661066055106604414" W106607810660671066056106604515" W106607910660681066057106604616" W106608010660691066058106604717" W106608110660701066059106604818" W106608210660711066060106604919" W106608310660721066061106605020" W106608410660731066062106605121" W106608510660741066063106605222" W106608610660751066064106605323" W106608710660761066065106605424" W





See Chart #1 Seat Pan - 12"-18" Depth 1 11See Chart #1 Seat Pan - 19"-22" Depth 1 111070459 Kit, Seat Pan Mounting Hardware 1 17 B

Screw, Hex Head (1/4-20 x 1-5/8") 1 22Screw, Hex Head (1/4-20 x 1-1/2") 1 43Spacer (1/4 x 3/8 x 3/16") 1 44Locknut (1/4-20) 1 65

1109336 Kit, Seat Pan Mounting Hardware 1 17 A,CScrew, Hex Head (1/4-20 x 1-3/4") 1 22Screw, Hex Head (1/4-20 x 1-5/8") 1 43Spacer (1/4 x 3/8 x 3/16") 1 44Locknut (1/4-20) 1 65Spacer, Coved (1/4 x 11/16 x 1/2") 1 66

A - Hardware used when a power elevating seat option is present. B - Includes items 2-5 C - Includes items 2-6

NOTE:


#1 Contoura Seat Cushion AssemblyChair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" Deep

N/AN/A1132986

1132985

1132984

1132983

1132982 16" W See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

N/AN/A1132991

1132990

1132989

1132988

1132987 18" W See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

1132998

1132997

1132996

1132995

1132994

1132993

1132992 20" W See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

1133003

1133002

1133001

1133000

1132999 N/AN/A22" W See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

1133008

1133007

1133006

1133005

1133004 N/AN/A24" W See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

A - Cushion Foam is not available separately. NOTE:

#2 Contoura Seat Cushion Cover

Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" DeepN/AN/A1132957113295611329551132954113295316" WN/AN/A1132962113296111329601132959113295818" W

113296911329681132967113296611329651132964113296320" W11329741132973113297211329711132970N/AN/A22" W11329791132978113297711329761132975N/AN/A24" W

Seat Cushion AssemblyADJASBA Only


Contoura Back without Mounting Hardware


Contoura Back without Mounting Hardware#1 Back Assembly without Hardware 16", 18", 20", 22", 24" Wide

OverallBack

Height24" Wide

MaterialBack

Height16" Wide 18" Wide 20" Wide 22" Wide

1132832113283111328301132829113282820"25"1132827113282611247341124733113282524"29"

#2 Back Pan with Vinyl Edge Trim 16", 18", 20", 22", 24" Wide

OverallBack

Height24" Wide

MaterialBack


1131409113140811314071131406113140520"25"1131412113141111224531122454113141024"29"

#3 Back Cushion Assembly 16", 18", 20", 22", 24" Wide

OverallBack

Height24" Wide

MaterialBack


1132824113282311328221132821113282020"25"1132819113281811256421125641113281724"29"



See Chart #1 Back Assembly without Hardware 16", 18", 20",22", 24" Wide

1 11See Chart #2 Back Pan with Vinyl Edge Trim 16", 18", 20", 22",

24" Wide1 12

See Chart #3 Back Cushion Assembly 16", 18", 20", 22", 24"Wide

1 131125725 Hook Fastener w/ Adhesive Back (1" W x 48" L) 1 141125724 Trim, Edge, Cut-To-Length, Vinyl Black (96" L) 1 15


Contoura Back Mounting HardwareADJASBA Only


Contoura Back Mounting HardwareADJASBA Only



1140945 Kit, Contoura Back Mounting Hdwr. - Round Canes 1 11 ABracket, Back Mounting, Front, Black 1 42Screw, Phillips Oval Head (#10-16 x 7/8") 1 23Screw, Socket Button (1/4-20 x 3/4") 1 84Washer (1/4 x 23/32 x 1/16") 1 85Locknut (1/4-20) 1 86Bracket, Back Mounting, Rear, Black 1 47



Curve Contoura Back w/o Mounting Hardware - After5/14/09





1161480 Kit, Curved Contour Back - Black (16" W x 25" H) 1 11 ABack, Curved Contoura - Black (16" W x 25" H) 1 12Upholstery, Back, Contoura - Black (16" W x 25" H) 1 14Foam, Back, Contoura (16" W x 25" H) 1 15Screw, Socket, Button (1/4-20 x 3/8") 1 47Support, Lateral (25" H) 1 28Support, Lumbar - Large 1 19Instruction Sheet, Contoura Back 1 1

1161481 Kit, Curved Contoura Back - Black (16" W x 28" H) 1 11 ABack, Curved Contoura - Black (16" W x 28" H) 1 12Upholstery, Back, Contoura - Black (18" W x 28" H) 1 14Foam, Back, Contoura (16" W x 28" H) 1 15Screw, Socket, Button (1/4-20 x 3/8") 1 47Support, Lateral (28" H) 1 28Support, Lumbar - Large 1 19Instruction Sheet, Contoura Back 1 1

1161482 Kit, Curved Contoura Back - Black (18" W x 25" H) 1 11 ABack, Curved Contoura - Black (18" W x 25" H) 1 12Support, Lateral (25" H) 1 28Screw, Socket, Button (1/4-20 x 3/8") 1 47Foam, Back, Contoura (18" W x 25" H) 1 15Upholstery, Back, Contoura - Black (18" W x 25" H) 1 14Support, Lumbar - Large 1 19Instruction Sheet, Contoura Back 1 1



1161485 Kit, Curved Contoura Back - Black (20" W x 28" H) 1 11 ABack, Curved Contoura - Black (20" W x 28" H) 1 12Upholstery, Back, Contoura - Black (20" W x 28" H) 1 14





Foam, Back, Contoura (20" W x 28" H) 1 15Screw, Socket, Button (1/4-20 x 3/8") 1 47Support, Lateral (28" H) 1 28Support, Lumbar - Large 1 19Instruction Sheet, Contoura Back 1 1

1161486 Kit, Curved Contoura Back - Black (22" W x 25" H) 1 11 ABack, Curved Contoura - Black (22" W x 25" H) 1 12Upholstery, Back, Contoura - Black (22" W x 25" H) 1 14Foam, Back, Contoura (22" W x 25" H) 1 15Support, Lateral (25" H) 1 28Screw, Socket, Button (1/4-20 x 3/8") 1 47Support, Lumbar - Large 1 19Instruction Sheet, Contoura Back 1 1




See Chart Curve Contoura Back Cushion Assembly 1 13 B1163130 Kit, Lateral Support, Contoura Back (25" H) 1 16 C

Screw, Socket, Button (1/4-20 x 3/8") 4 17Support, Lateral (25" H) 2 18

1163131 Kit, Lateral Support, Contoura Back (28" H) 1 16 CScrew, Socket, Button (1/4-20 x 3/8") 4 17





Support, Lateral (28" H) 2 181084410 Support, Lumbar - Large 1 19

A - Includes Items 2 thru 9. B - Includes Items 4 and 5. C - Included Items 7 and 8.

NOTE:

#3 Curve Contoura Back Cushion Assembly

Dimensions Part Number Dimensions Part Number1163253

20" W x 28" H1163248 16" W x 25" H See Note(s) A See Note(s) A

1163254 22" W x 25" H1163249

16" W x 28" H See Note(s) A See Note(s) A1163255


1163256 24" W x 25" H1163251

18" W x 28" H See Note(s) A See Note(s) A1163257


A - Includes Items 4 and 5. NOTE:


Back Canes, Spreader Bars and Attaching HardwareFor ASBA Seats (12"-24" Wide) (Before 7/5/05)

NOTE: Chairs manufactured with a seat width, seat depth or back height of 20" and greater including allheavy duty packages will be equipped with a spreader bar standard.






See Chart #1 Back Cane Assemblies 1 21See Chart #2 Spreader Bar 1 121135506 Package, Foam Hand Grip (9" L) 10 131134426 Package, Plug Button, Black (3/4") 10 141070499 Kit, Back Cane Attaching Hardware, For CJ Bracket

12-13" Deep Seat2 15 A,E

Insert, Non-Threaded Back Cane (For Back Heights 20" and Lower)

1 28Washer (1/4 x 23/32 x 1/16") 1 810Locknut (1/4-20) 1 811Spacer, Coved (1/4 x 11/16 x 1/2") 1 812Bracket, Back Mounting, Black - Right 1 113Bracket, Back Mounting, Black - Left 1 113Screw, Hex Head (1/4-20 x 1-5/8") 1 414

1070500 Kit, Back Cane Attaching Hardware, For CJ Bracket14-15" Deep Seat

2 15 A,EInsert, Non-Threaded Back Cane (For Back Heights 20" and Lower)

1 28Washer (1/4 x 23/32 x 1/16") 1 810Locknut (1/4-20) 1 811Spacer, Coved (1/4 x 11/16 x 1/2") 1 812Bracket, Back Mounting, Black - Right 1 113Bracket, Back Mounting, Black - Left 1 113Screw, Hex Head (1/4-20 x 1-5/8") 1 414

1070457 Kit, Back Cane Attaching Hardware 2 15 B,CLocknut (5/16-24) 1 26Screw w/ Lug (5/16-24 x 1-3/8") 1 27Insert, Non-Threaded Back Cane (For Back Heights 20" and Lower)

1 28Screw, Hex Head (1/4-20 x 1-5/8") 1 49Washer (1/4 x 23/32 x 1/16") 1 410Locknut (1/4-20) 1 411Spacer, Coved (1/4 x 11/16 x 1/2") 1 412

1070458 Kit, Back Cane Attaching Hardware 2 15 B,DLocknut (5/16-24) 1 26Screw w/ Lug (5/16-24 x 1-3/8") 1 27Insert, Non-Threaded Back Cane(For Back Heights 21" and Higher)

1 28Screw, Hex Head (1/4-20 x 1-5/8") 1 49Washer (1/4 x 23/32 x 1/16") 1 410Locknut (1/4-20) 1 411Spacer, Coved (1/4 x 11/16 x 1/2") 1 412




A - Includes items 8 and 10-14 B - Includes items 6-12 C - Used for 12"-20" high back canes D - Used for 21"-24" high back canes E - Prior to 7/9/04 new back cane attaching hardware must be ordered for 12"-15" deep seats that use CJ brackets. The

threaded insert was replaced with a non-threaded insert for 12"-20" high back canes.

NOTE:




#1 Back Cane Assemblies

BackHeight

Back Cane-No Push Handle

10 Deg. BendBack Cane-Push Handle

StraightBack Cane-Push Handle10 Deg. Bend

10499551045253104524112"10499561045254104524213"10499571045255104524314"10499581045256104524415"10455751048558104899216"10455761048559104899317"10455771048560104899418"10455781048561104899519"10455791048562104899620"1052227N/AN/A21"1052230N/AN/A22"1054521N/AN/A23"1054524N/AN/A24"

NOTE: Back Cane Assemblies include Foam Grips and Plug Buttons where shown




#2 Spreader BarChair Width Part Number

104387114"104387215"104387316"104387417"104387518"104387619"104387720"104387821"104387922"104388023"104388124"


Back Canes and Spreader BarsFor ADJASBA Seat (12"-16" Wide) (After 7/4/05)





1126147 Kit, Spreader Bar Assembly (12"-16" Wide) 1 11 ACover, Spreader Bar (16-20" W) 1 12Insert, Spreader Bar Connector, Black 1 23Anti-Rattle (1") 1 24Screw, Socket Button Head (1/4-20 x 1-1/2") 1 45Spacer, Coved (1/4 x 11/16 x 1/2") 1 46Tube, Spreader Bar, Black 1 17Locknut (1/4-20) 1 28Plug Button, Black (1") 1 29

1127154 Kit, Back Cane Assembly with Hardware (12"-15"Back Height)

1 110 BGrip, Hand, Foam (4") 1 111Handle, Push, Black 1 112Cane, Back, Lower, Black - Right/Left (12-15" H) 1 113Screw, Socket Head (1/4-20 x 1-1/4") 1 214Locknut (1/4-20) 1 215





1135505 Package, Foam Hand Grip (4" L) 10 111A - Includes items 2-9 B - Includes items 11-15

NOTE:


Back Cane Attaching HardwareFor ADJASBA Seat (12"-16" Wide) (After 7/4/05)





1126146 Kit, Back Cane Attaching Hardware 2 11 AScrew, Hex Head w/ Patch (5/16-18 x 1-3/4") 1 42Washer, Flat (21/64 x 53/64 x 7/64") 1 43Insert, Back Cane 1 24Spacer, Coved (3/4 x 1 x 1/2") 1 45Washer, Flat (5/16 x 5/8 x 1/16") 1 46Locknut (5/16-18) 1 47

1135499 Kit, Back Cane Bracket Mounting Hardware 2 18 BT-Nut (5/16-18) 1 29Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 210Washer, Flat (5/16 x 5/8 x 1/16") 1 211Locknut (1/4-20) 1 412Washer (1/4 x 1/2 x 1/16") 1 213Screw, Hex Head (1/4-20 x 1-3/4") 1 414

1133597 Bracket, Back Cane Mounting, Black - Right 1 1151133598 Bracket, Back Cane Mounting, Black - Left 1 115


NOTE:


Back Cane Attaching HardwareFor ADJASBA Seats (12"-16" W x 12"-15" D) TRRO Option





1139553 Kit, Back Cane Attaching Hardware For TRROOption

2 11 ABolt, Round Head Square Neck (5/16-18 x 1-3/4") 1 42Insert, Back Cane 1 23Spacer, Coved (3/4 x 1 x 1/2") 1 44Washer, Flat (5/16 x 5/8 x 1/16") 1 45Locknut (5/16-18) 1 46

1136026 Kit, Back Cane Bracket Mounting Hardware ForTRRO Option (12"-15" Deep)

2 17 BT-Nut (5/16-18) 1 28Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 29Washer, Flat (5/16 x 5/8 x 1/16") 1 210Washer (1/4 x 1/2 x 1/16") 1 1011Screw, Hex Head (1/4-20 x 1-3/4") 1 612Locknut (1/4-20) 1 613


NOTE:





1139553 Kit, Back Cane Attaching Hardware For TRROOption

2 11 ABolt, Round Head Square Neck (5/16-18 x 1-3/4") 1 42Insert, Back Cane 1 23Spacer, Coved (3/4 x 1 x 1/2") 1 44Washer, Flat (5/16 x 5/8 x 1/16") 1 45Locknut (5/16-18) 1 46

1136027 Kit, Back Cane Bracket Mounting Hardware ForTRRO Option (16"-18" Deep)

2 17 BT-Nut (5/16-18) 1 28Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 29Washer, Flat (5/16 x 5/8 x 1/16") 1 210Screw, Hex Head w/ Patch (1/4-20 x 1-1/4") 1 211Screw, Hex Head (1/4-20 x 1-3/4") 1 412Washer (1/4 x 1/2 x 1/16") 1 813Locknut (1/4-20) 1 414


NOTE:



Contoura Backs for ADJASBA Seating do not utilize a Spreader Bar Assembly.



Contoura Backs for ADJASBA Seating do not utilize a Spreader Bar Assembly.Item


Package AssemblySee Chart #1 Back Cane Assemblies 1 111135506 Package, Foam Hand Grip (9" L) 10 121134426 Package, Plug Button, Black (3/4") 10 131125709 Kit, Spreader Bar Assembly (16"-20" Wide) 1 14 A

Handle, Spreader Bar, Black 1 25Screw, Hex Head (1/4-20 x 1-1/2") 1 26Spacer, Coved (1/4 x 11/16 x 1/2") 1 47Anti-Rattle (1") 1 28Tube, Spreader Bar, Adjustable, Black (16 - 20" W) 1 19Locknut (1/4-20) 1 210

1125710 Kit, Spreader Bar Assembly 20"-24" Wide 1 14 AHandle, Spreader Bar, Black 1 25Screw, Hex Head (1/4-20 x 1-1/2") 1 26Spacer, Coved (1/4 x 11/16 x 1/2") 1 47Anti-Rattle (1") 1 28Tube, Spreader Bar, Adjustable, Black (20 - 24" W) 1 19Locknut (1/4-20) 1 210

1025730 Locknut (5/16-24) 1 2111031026 Screw w/ Lug (5/16-24 x 1-3/8") 1 212



BackHeight

Back Cane-Push Handle10 Deg. Bend

Left

Back Cane-No PushHandle

10 Deg. BendRight


10 Deg. BendLeft

Back Cane-Push Handle

StraightRight


StraightLeft


Right11338151133814113378611337851134059113405812"11338171133816113378811337871134061113406013"11338191133818113379011337891134063113406214"11338211133820113379211337911134065113406415"11338231133822113379411337931134067113406616"11338251133824113379611337951134069113406817"113382711338261143335

1143334

1134071113407018" See Note(s) C See Note(s) B11338291133828113380011337991134073113407219"11338311133830113380211338011134075113407420"113383311338321136012

1136011

1134077113407621" See Note(s) B See Note(s) B113383511338341136014

1136013

1134079113407822" See Note(s) B See Note(s) B75

To order call toll free 1-800-333-6900, or www.invacare.comForm No. 00-191


Contoura Backs for ADJASBA Seating do not utilize a Spreader Bar Assembly.


BackHeight


Left


10 Deg. BendRight


10 Deg. BendLeft


StraightRight


StraightLeft


Right

113383811338371136016

1136015 1134081113408023" See Note(s) B See Note(s) B

113384011338391136018

1136017 1134083113408224" See Note(s) B See Note(s) B

B - 21"-24" High Straight Back Canes with Push Handles are only offered On-Chair when the Back Upholstery is omitted C - Chairs with Contoura Backs use 18" high back canes only

NOTE:

NOTE: Back Cane Assemblies include Foam Grips and Plug Buttons where shown





1133755 Kit, Back Cane Mounting Hardware (Pair) 2 11 AScrew, Hex Head (5/16-18 x 1") 1 42Washer, Flat (21/64 x 53/64 x 7/64") 1 43Locknut (5/16-18) 1 44Locknut (5/16-24) 1 25Screw w/ Lug (5/16-24 x 1-3/8") 1 26



Back Cane Attaching HardwareFor ADJASBA Seats (16"-24" Wide) with TRRO Option


Back Cane Attaching HardwareFor ADJASBA Seats (16"-24" Wide) with TRRO Option



1137234 Kit, Back Cane Mounting Hardware For TRROOption (Pair)

2 11Washer, Flat (21/64 x 53/64 x 7/64") 1 42Bolt, Round Head Square Neck (5/16-18 x 1-1/4") 1 23Bolt, Round Head Square Neck (5/16-18 x 1") 1 24Locknut (5/16-18) 1 45Screw w/ Lug (5/16-24 x 1-3/8") 1 26Locknut (5/16-24) 1 27


Back Upholstery - NylonNon-Recliner



Single Liners

Width 21"-22" High

23"-24" High

12"-13" High

14"-15" High

16"-17" High

18"-19" High

20" High

N/AN/AN/A104525810452571045222104522112" WN/AN/AN/A104526010452591045224104522313" W

105452710451571068945104520510451731049942104993914" W105452810451581068946104520610451741049943104994015" W105452910451591068947104520710451751045175104994116" W105453010451601068948104520810451761049945N/A17" W105453110451611068949104520910451771049946N/A18" W

Dual Liners

Width 16"-17" High

18" - 19" High

20" High

21" - 22" High

23" - 24" High

1054532104516210689501045210104517814" W1054533104516310689511045211104517915" W1054534104516410689521045212104518016" W1054535104516510689531045213104518117" W1054536104516610689541045214104518218" W1054537104516710689551045215104518319" W1054538104516810689561045216104518420" W1054539104516910689571045217104518521" W1054540104517010689581045218104518622" W1054541104517110689591045219104518723" W1054542104517210689601045220104518824" W

NOTE: Dual liner back upholstery is used with chairs that have a seat deeper than 17" or back wider than 18".



Back Upholstery Hardware 1026298Consists of:

Screw with Washer (10 x 7/8")2 eachCable Ties2 each


Back Upholstery - VinylNon-Recliner



Single Liners

Width 21"-22" High

23"-24" High

12"-13" High

14"-15" High

16"-17" High

18"-19" High

20" High

N/AN/AN/A888104526288810452618881045226888104522512" WN/AN/AN/A888104526488810452638881045228888104522713" W

888105454388810451258881068961888104506088810450768881049950888104994714" W888105454488810451268881068962888104506188810450778881049951888104994815" W888105454588810451278881068963888104506288810450788881049952888104994916" W888105454688810451288881068964888104506388810450798881049953N/A17" W888105454788810451298881068965888104506488810450808881049954N/A18" W

NOTE: Specify upholstery color. See page titled Frame Finishes, Touch-Up Paints and Upholstery Options page.

Dual Liners

Width 16"-17" High

18"-19" High

20" High

21"-22" High

23"-24" High

8881054548888104513088810689668881045065888104508114" W8881054549888104513188810689678881045066888104508215" W8881054550888104513288810689688881045067888104508316" W8881054551888104513388810689698881045068888104508417" W8881054552888104513488810689708881045069888104508518" W8881054553888104513588810689718881045070888104508619" W8881054554888104513688810689728881045071888104508720" W8881054555888104513788810689738881045072888104508821" W8881054556888104513888810689748881045073888104508922" W8881054557888104513988810689758881045074888104509023" W8881054558888104514088810689768881045075888104509124" W

NOTE: Dual liner back upholstery is used with chairs that have a seat deeper than 17" or back wider than 18".NOTE: Specify upholstery color. See page titled Frame Finishes, Touch-Up Paints and Upholstery Options page.



Hardware


Screw with Washer (10 x 7/8")2 eachCable Ties2 each


Recliner Back AssemblyFor ASBA Seat Frames (Before 7/5/05)



#3 Back Cane with Grip

Back Height 16"-17" Wide Rt. 16"-17" Wide Lt. 18"-24" Wide Rt. 18"-24" Wide Lt.105209010520891052080105207918" H105209210520911052082105208120" H105209410520931052084105208322" H105209610520951052086105208524" H105209810520971052088105208726" H

NOTE: When converting a non-recliner to a manual recline, a recline wire harness must be ordered as well. See Battery Charger andHarness page.





1027095 Plug Button, Black (7/8") 1 211052997 Headrest Tube Assembly, Black - Right 1 121052998 Headrest Tube Assembly, Black - Left 1 12

See Chart #3 Back Cane with Grip 1 131050214 Cable with Trigger 1 24 B1050215 Cable with Trigger 1 24 C1050216 Cable with Trigger 1 24 D1026032 Washer, Nylon (11/32 x 11/16 x 1/16") 1 451050153 Screw, Shoulder Hex Socket Head (5/16 x 7/8",

1/4-20)1 26

1050154 Cylinder, Lock, Recline 1 27 E1050306 Cylinder, Lock 1 27 F1050136 Pivot, Block 1 281012371 Washer, Nylon (3/8 x 7/8 x 1/16") 1 1291031665 Screw, Shoulder Hex Socket Head (3/8 x 1-1/2",

5/16-18)1 410

1050293 Bar, Spreader, Black (14-20" W) 1 111 G1050294 Bar, Spreader, Black (21-24" W) 1 111 H1024713 Spring, Torsion w/ Button 1 2121091417 Screw, Phillips Pan Head (#10-24 x 1-1/4") 1 2131095503 Package, Cable Tie (5-5/8" L) 10 1141025736 Locknut (1/4-20) 1 2151026907 Washer (1/4 x 1/2 x 1/16") 1 2161026158 Locknut (5/16-18) 1 4171025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 4181053178 Switch Assembly, Limit 1 119 A1008525 Washer, Internal Tooth Lock (#4-40) 1 5201025116 Screw, Slotted Hex Washer Head Tap (#4-3/8") 1 5211024001 Sensor, Actuator Switch 1 1221050310 Clamp, Cable 1 1231095503 Package, Cable Tie (5-5/8" L) 10 1241092913 Cable, Drive Lockout Sensor 1 125

A - Includes items 20-24. Sensor cable is not included, see item 25 B - 26" high back canes C - 22-24" high back canes D - 18-20" high back canes E - 250 lb. weight limit F - 251-400 lb. weight limit G - 16-17" wide H - 18-24" wide

NOTE:


Curve Contoura Mounting Back Hardware - After 5/14/09


Curve Contoura Mounting Back Hardware - After 5/14/09Item


Package Assembly1157925 Kit, Metal Curved and Curve Contoura Back

Mounting Hardware1 11 A

Spacer, Back Pan, Black 1 42Hook, Back Assembly Mounting 1 43Screw, Cap, Button Head, Socket (1/4-20 x 1") 1 44Washer (1/4 x 23/32 x 1/16") 1 85Screw, Phillips Oval Head (#10-16 x 7/8") 1 26Locknut (1/4-20) 1 47

A - Includes Items 2 thru 7. NOTE:


Recliner Back Assembly

For ADJRECL Seat Frames (After 7/4/05)



For ADJRECL Seat Frames (After 7/4/05)#3 Back Cane with Grip

Back Height 16"-17" Wide Rt. 16"-17" Wide Lt. 18"-24" Wide Rt. 18"-24" Wide Lt.105209010520891052080105207918" H105209210520911052082105208120" H105209410520931052084105208322" H105209610520951052086105208524" H105209810520971052088105208726" H



For ADJRECL Seat Frames (After 7/4/05)Item


Package Assembly1027095 Plug Button, Black (7/8") 1 211052997 Headrest Tube Assembly, Black - Right 1 121052998 Headrest Tube Assembly, Black - Left 1 12

See Chart #3 Back Cane with Grip 1 131050214 Cable with Trigger 1 24 B1050215 Cable with Trigger 1 24 C1050216 Cable with Trigger 1 24 D1026032 Washer, Nylon (11/32 x 11/16 x 1/16") 1 451050153 Screw, Shoulder Hex Socket Head (5/16 x 7/8",

1/4-20)1 26

1050154 Cylinder, Lock, Recline 1 27 E1050306 Cylinder, Lock 1 27 F1050136 Pivot, Block 1 281012371 Washer, Nylon (3/8 x 7/8 x 1/16") 1 1291031665 Screw, Shoulder Hex Socket Head (3/8 x 1-1/2",

5/16-18)1 410

1050293 Bar, Spreader, Black (14-20" W) 1 111 G1050294 Bar, Spreader, Black (21-24" W) 1 111 H1024713 Spring, Torsion w/ Button 1 2121091417 Screw, Phillips Pan Head (#10-24 x 1-1/4") 1 2131095503 Package, Cable Tie (5-5/8" L) 10 1141025736 Locknut (1/4-20) 1 2151026907 Washer (1/4 x 1/2 x 1/16") 1 2161026158 Locknut (5/16-18) 1 4171025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 4181134498 Kit, Limit Switch Assembly 1 119 A

Screw, Slotted Hex Washer Head Tap (#4-3/8") 1 520Washer, Internal Tooth Lock (#4-40) 1 521Sensor, Actuator Switch 1 122Clamp, Cable 1 123

1092913 Cable, Drive Lockout Sensor 1 1241146573 Cable, Drive Lockout Sensor, MK6i 1 125 I1144926 Cable, Drive Lockout Sensor, MK6i 1 126 J1142231 Cable, GB TT Interface 1 127 K



For ADJRECL Seat Frames (After 7/4/05)A - Includes items 20-23. Cable sensor is not included, see item 24, 25 or 26 B - 26" high back canes C - 22-24" high back canes D - 18-20" high back canes E - 250 lb. weight limit F - 251-400 lb. weight limit G - 16-17" wide H - 18-24" wide I - Sensor Cable used for chairs manufactured with MK6i electronics and 4-Pole Motors only. J - Sensor Cable used with item 27 GB TT Interface Cable for chairs manufactured with MK6i Electronics and GB TT Motors K - Interface Cable used with item 26 Sensor Cable for chairs manufactured with MK6i Electronics and GB TT Motors

NOTE:


Back Upholstery - NylonRecliner

Single Liners

Width 18" High 20" High 22" High 24" High 26" High1050334105032910503241050319105031416" W1050335105033010503251050320105031517" W1050336105033110503261050321105031618" W


Back Upholstery - NylonRecliner

Dual Liners

Width 18" High 20" High 22" High 24" High 26" High1050383105037210503611050350105033916" W1050384105037310503621050351105034017" W1050385105037410503631050352105034118" W1050386105037510503641050353105034219" W1050387105037610503651050354105034320" W1050388105037710503661050355105034421" W1050389105037810503671050356105034522" W1050390105037910503681050357105034623" W1050391105038010503691050358105034724" W

NOTE: Dual liner back upholstery is used with chairs that have a seat deeper than 17" or back wider than 18".

Hardware


Screw with Washer (10 x 7/8")10 each


Back Upholstery - VinylRecliner

Single Liners

Width 18" High 20" High 22" High 24" High 26" High8881050583888105057888810505738881050568888105056316" W8881050584888105057988810505748881050569888105056417" W8881050585888105058088810505758881050570888105056518" W

NOTE: Specify upholstery color. See page titled Frame Finishes, Touch-Up Paints and Upholstery Options page.


Back Upholstery - VinylRecliner

Dual Liners

Width 18" High 20" High 22" High 24" High 26" High8881050632888105062188810506108881050599888105058816" W8881050633888105062288810506118881050600888105058917" W8881050634888105062388810506128881050601888105059018" W8881050635888105062488810506138881050602888105059119" W8881050636888105062588810506148881050603888105059220" W8881050637888105062688810506158881050604888105059321" W8881050638888105062788810506168881050605888105059422" W8881050639888105062888810506178881050606888105059523" W8881050640888105062988810506188881050607888105059624" W

NOTE: Dual liner back upholstery is used with chairs that have a seat deeper than 17" or back wider than 18".NOTE: Specify upholstery color. See page titled Frame Finishes, Touch-Up Paints and Upholstery Options page.




Headrest Upholstery and PillowsRecliner

Nylon Headrest

Chair Width Part Number105462816" W105528117" W105462918" W105528219" W105528320" W105528421" W105528522" W105528623" W105528724" W

Vinyl Headrest

Chair Width Part Number888105463116" W888105528917" W888105463218" W888105529019" W888105529120" W888105529221" W888105529322" W888105529423" W888105529524" W

NOTE: Specify upholstery color when ordering. See page titled Frame Finishes, Touch-Up Paints and Upholstery Options


Headrest Upholstery and PillowsRecliner



Headrest Pillows - Nylon

Chair Width 16"-18" W 19"-22" W 23"-24" W105527410545981054896Part Number

Headrest Pillows - Vinyl

Chair Width 16"-18" W 19"-22" W 23"-24" W888105527788810546238881054619Part Number

NOTE: Specify upholstery color when ordering. See page titled Frame Finishes, Touch-Up Paints and Upholstery Options


Captain Seat Arms and Hardware18" Wide Models


Captain Seat Arms and Hardware18" Wide Models



1117328 Kit, Arm Pad w/ Screws, Full Length, UrethaneWaterfall, Black (13" L x 2-5/8" W)

1 21 A,E

1071359 Plate, Armrest (Black) 1 221028755 Screw, Phillips Pan Head (#10-32 x 5/8") 1 431009837 Screw, Socket Button Head (1/4-20 x 1") 1 241025711 Nut, Hex (1/4-20) 1 251025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 661070928 Tube, Arm, Upper Height and Width Adjustable,

Black1 27

15680X013 Anti-Rattle (1") 1 287930304 Screw, Socket Head (1/4-20 x 1-1/4") 25 291026906 Locknut (5/16-24) 1 2101102546 Screw, Phillips Pan Head (#10-32 x 7/8") 1 2111070106 Insert, Armrest, Black 1 2121031026 Screw w/ Lug (5/16-24 x 1-3/8") 1 2131074120 Kit, Armrest Attaching Hardware (Pair) 2 114 B1073378 Kit, Arm Pad Attaching Hardware 2 115 C1070756 Arm Tube Assembly, Upper Adjustable (Pair) 2 116 D

A - As of 1/3/02 upholstered waterfall armpads were replaced with black urethane waterfall armpads. Order in pairs for chairs manufactured before 1/3/02.

B - Includes items 2, 4, 5, 6, 10, 13 C - Includes items 3, 11, 12 D - Includes items 7-9 E - After 7/9/07 Invacare recommends ordering armpads in pairs to assure uniform appearance on chair

NOTE:


Captain Seat Arms and Hardware20" and 22" Wide Models


Captain Seat Arms and Hardware20" and 22" Wide Models




1 21 A,E

1101912 Plate, Armrest 1 221028755 Screw, Phillips Pan Head (#10-32 x 5/8") 1 231009837 Screw, Socket Button Head (1/4-20 x 1") 1 241025711 Nut, Hex (1/4-20) 1 251025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 261101914 Tube, Arm, Upper Adjustable, Black 1 271101110 Anti-Rattle 1 281038379 Screw, Socket Head Cap w/ Patch (1/4-20 x 1-1/2") 1 291026906 Locknut (5/16-24) 1 2101102546 Screw, Phillips Pan Head (#10-32 x 7/8") 1 2111101634 Insert, Armrest, Black 1 2121031026 Screw w/ Lug (5/16-24 x 1-3/8") 1 2131101917 Hardware, Armrest Attaching (Pair) 2 114 B1101916 Hardware, Arm Pad Attaching (Pair) 2 115 C1101915 Arm Tube Assembly, Upper Adjustable (Pair) 2 116 D

A - As of 1/3/02 upholstered waterfall armpads were replaced with black urethane waterfall armpads. Order in pairs for chairs manufactured before 1/3/02.

B - Includes items 2, 4, 5, 6, 10, 13 C - Includes items 3, 11, 12 D - Includes items 7-9 E - After 7/9/07 Invacare recommends ordering armpads in pairs to assure uniform appearance on chair

NOTE:


Arms, Adjustable Height(12-13" W x 12-15" D)/(14-15" W x 12-22" D) ASBA Seats & (12-16" W x

12-18" D) ADJASBA Seats


Arms, Adjustable Height(12-13" W x 12-15" D)/(14-15" W x 12-22" D) ASBA Seats & (12-16" W x

12-18" D) ADJASBA SeatsItem


Package Assembly8881015932 Pad, Arm, Vinyl, Full Length - Right (14" L x 2" W) 1 11 A8881015933 Pad, Arm, Vinyl, Full Length - Left (14" L x 2" W) 1 11 A8881053577 Kit, Arm Pad w/ Screws, Full Length (14" L x 2" W)

(Pair)2 11 A

8881011811 Pad, Arm, Vinyl, Desk Length (9" L x 2" W) 1 11 A8881053578 Kit, Arm Pad w/ Screws, Desk Length (9" L x 2" W)

(Pair)2 11 A

1071263 Arm Tube Assembly w/ Plug Buttons, Full Length,Black - Right/Left

1 121071259 Arm Tube Assembly w/ Plug Buttons, Desk Length,

Black - Right/Left1 12

1027095 Plug Button, Black (7/8") 1 231055949 Screw, Phillips Pan Head (#10-32 x 1-1/8") 2 14

47471X074 Spring, Arm Lock 1 151028594 Pin, Arm Lock, Black 1 161090768 Kit, Lock Handle w/Rivets (Pair) 2 171065936 Plug, Pivot 1 281067734 Plug Button, Black (5/8") 1 291016298 Grip, Push Handle 1 1101068585 Arm Base Assembly, Adjustable Height, Black -

Right1 111

1068586 Arm Base Assembly, Adjustable Height, Black - Left 1 111A - Specify upholstery color when ordering. See page titled Frame Finishes, Touch-Up Paints and Upholstery Options NOTE:


Arms, Fixed Height(16"-24" Wide) x (16"-22" Deep) Seat Frames

#1 Arms Less Pad16"-19" Deep Seat Frames

Arm Style Right Left10685671068566Desk Length10685601068559Full Length



#1 Arms Less Pad20" and Deeper Seat Frames

Arm Style Right Left1068541

1068540Desk Length See Note(s) A See Note(s) A

1068529

1068528 Full Length See Note(s) A See Note(s) A

A - The ADJASBA seat frame for 19-22" depths must use the 16-19" deep arms only. NOTE:





See Chart #1 Arms Less Pad - 16"-19" Deep Seat Frames 1 11See Chart #1 Arms Less Pad - 20" and Deeper Seat Frames 1 11 C1117328 Kit, Arm Pad w/ Screws, Full Length, Urethane

Waterfall, Black (13" L x 2-5/8" W)

1 12 A,D

1110818 Kit, Arm Pad w/ Screws, Full Length, UrethaneWaterfall, Black (13" L x 2-5/8" W) (Pair)

2 121117327 Kit, Arm Pad w/ Screws, Desk Length, Urethane


1 12 A,D

1110817 Kit, Arm Pad w/ Screws, Desk Length, UrethaneWaterfall, Black (9" L x 2-5/8" W) (Pair)

2 121068564 Tube, Arm, Desk Length, Black - Right (16-19" D) 1 131068565 Tube, Arm, Desk Length, Black - Left (16-19" D) 1 131068414 Tube, Arm, Desk Length, Long, Black - Right (20"

and Deeper)1 13 C

1068415 Tube, Arm, Desk Length, Long, Black - Left (20"and Deeper)

1 13 C1068490 Tube, Arm, Full Length, Black - Right (16-19"D) 1 131068491 Tube, Arm, Full Length, Black - Left (16-19"D) 1 131068473 Tube, Arm, Full Length, Long, Black - Right (20"

and Deeper)1 13 C

1068474 Tube, Arm, Full Length, Long, Black - Left (20" andDeeper)

1 13 C1032244 Grip, Foam Hand (9" L) 1 141135508 Package, Foam Hand Grip (9" L) 10 141025729 Screw, Phillips Pan Head Tap (#8-32 x 3/8") 1 451035472 Guard, Clothing, Desk Length 1 161044572 Guard, Clothing, Full Length (16 - 19" D) 1 161044005 Guard, Clothing, Full Length (20" and Deeper) 1 16 C1035065 Cover, Clothing Guard with Pocket, Fixed Height

Desk Length & Adjustable Height Full/Desk Length1 17

1044588 Cover, Clothing Guard with Pocket Fixed Height FullLength (20" and Deeper)

1 171055949 Screw, Phillips Pan Head (#10-32 x 1-1/8") 2 181094270 Package, Screw, Phillips Pan Head (#10-32 x

1-1/4")2 18 B

1065936 Plug, Pivot 1 291067734 Plug Button, Black (5/8") 1 210

A - As of 1/3/02 upholstered waterfall arm pads were replaced with black urethane waterfall arm pads. Order in pairs with screws for chairs manufactured before 1/3/02.

B - For Black Urethane Waterfall Arm pads only. C - The ADJASBA seat frame for 19-22" depths must use the 16-19" deep arms only. D - After 7/9/07 Invacare recommends ordering armpads in pairs to assure uniform appearance on chair

NOTE:


Arms, Adjustable Height(16"-24" Wide) x (16"- 22" Deep) Seat Frames


Arms, Adjustable Height(16"-24" Wide) x (16"- 22" Deep) Seat Frames




1 11 A,D

1110818 Kit, Arm Pad w/ Screws, Full Length, UrethaneWaterfall, Black (13" L x 2-5/8" W) (Pair)

2 111117327 Kit, Arm Pad w/ Screws, Desk Length, Urethane


1 11 A,D

1110817 Kit, Arm Pad w/ Screws, Desk Length, UrethaneWaterfall, Black (9" L x 2-5/8" W) (Pair)

2 111071253 Arm Tube Assembly w/ Plug Buttons, Full Length,

Black - Right/Left1 12

1070859 Arm Tube Assembly w/ Plug Buttons, Desk Length,Black - Right/Left

1 121027095 Plug Button, Black (7/8") 1 231055949 Screw, Phillips Pan Head (#10-32 x 1-1/8") 2 141094270 Package, Screw, Phillips Pan Head (#10-32 x

1-1/4")2 14 B

1064130 Guard, Clothing 1 1547471X074 Spring, Arm Lock 1 16

1028594 Pin, Arm Lock, Black 1 171032244 Grip, Foam Hand (9" L) 1 181135508 Package, Foam Hand Grip (9" L) 10 181090768 Kit, Lock Handle w/Rivets (Pair) 2 191028645 Rivet 1 6101065936 Plug, Pivot 1 2111067734 Plug Button, Black (5/8") 1 2121035065 Cover, Clothing Guard with Pocket, Fixed Height

Desk Length & Adjustable Height Full/Desk Length1 113

1068416 Arm Base Assembly, Black - Right (16-19" D) 1 1141068417 Arm Base Assembly, Black - Left (16-19" D) 1 1141068418 Arm Base Assembly, Black - Right (20" and Deeper) 1 114 C1068419 Arm Base Assembly, Black - Left (20" and Deeper) 1 114 C1067761 Arm Base Assembly, 1" Lower, Black - Right

(16-19" D)1 114

1067762 Arm Base Assembly, 1" Lower, Black - Left (16-19"D)

1 1141067755 Arm Base Assembly, 1" Lower, Black - Right (20"

and Deeper)1 114 C

1067756 Arm Base Assembly, 1" Lower, Black - Left (20" andDeeper)

1 114 CA - As of 1/3/02 upholstered waterfall armpads were replaced with black urethane waterfall armpads. Order in pairs with

screws for chairs manufactured before 1/3/02. B - For Black Urethane Waterfall Armpads only C - The ADJASBA seat frame for 19-22" depths must use the 16-19" deep arms only. D - After 7/9/07 Invacare recommends ordering armpads in pairs to assure uniform appearance on chair

NOTE:

112


Arm Mounting Swingaway HardwareASBA and ADJASBA/ADJRECL Seats


Arm Mounting Swingaway HardwareASBA and ADJASBA/ADJRECL Seats



1068488 Kit, Swingaway Armrest Mounting Hardware 1 11 A1019590 Screw, Socket Button Head (1/4-20 x 1-5/8") 1 121068025 Clevis, Pivot 1 131025195 Locknut (1/4-20) 1 141068039 Pin, Pull 1 15



Front/Rear Arm Socket Assembly and HardwareADJASBA Seat (12"-16" Wide) (After 7/4/05)


Front/Rear Arm Socket Assembly and HardwareADJASBA Seat (12"-16" Wide) (After 7/4/05)



1135502 Kit, Front/Rear Arm Socket Assembly MountingHardware

1 11 AScrew, Hex Head w/ Patch (5/16-18 x 5/8") 1 42Washer, Flat (5/16 x 5/8 x 1/16") 1 43T-Nut (5/16-18) 1 44

1122619 Socket, Arm, Front - Right 1 151122620 Socket, Arm, Front - Left 1 151126142 Socket, Arm, Rear 1 16



Front/Rear Arm Socket Assembly and HardwareADJASBA/ADJRECL Seats (16"-24" Wide) (After 7/4/05)


Front/Rear Arm Socket Assembly and HardwareADJASBA/ADJRECL Seats (16"-24" Wide) (After 7/4/05)



1125734 Kit, Front/Rear Arm Socket Assembly MountingHardware

1 11 AScrew, Hex Head w/ Patch (5/16-18 x 3/4") 1 22Washer, Steel (5/16 x 3/4 x 1/16") 1 43T-Nut (5/16-18) 1 44Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 25

1122619 Socket, Arm, Front - Right 1 161122620 Socket, Arm, Front - Left 1 161125478 Socket, Arm, Rear - Right 1 171125479 Socket, Arm, Rear - Left 1 171134481 Socket, Arm, ADJRECL, Rear - Right 1 171134482 Socket, Arm, ADJRECL, Rear - Left 1 17



Front/Rear Arm Socket Assembly and HardwareADJASBA Seats with TRRO Option (16"-24" Wide)


Front/Rear Arm Socket Assembly and HardwareADJASBA Seats with TRRO Option (16"-24" Wide)



1136025 Kit, Front/Rear Arm Socket Assembly MountingHardware For TRRO Option

1 11Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 12Screw, Hex Head w/ Patch (5/16-18 x 1") 1 13Screw, Socket Head (5/16-18 x 3/4") 1 14Washer, Steel (5/16 x 3/4 x 1/16") 1 45T-Nut (5/16-18) 1 16T-Nut (5/16-18) 1 27Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 28

1122619 Socket, Arm, Front - Right 1 191122620 Socket, Arm, Front - Left 1 19


Cantilever Arms


Cantilever ArmsItem


Package Assembly1161126 Cantilever Arm Assembly, Full Length - Right 1 11 A1161127 Cantilever Arm Assembly, Full Length - Left 1 11 A1161235 Pivot, Black 1 121160902 Bearing, Flange 1 231161232 Clamp, Black 1 141161233 Clamp, Block, Black 1 151161234 Tab, Stop, Black 1 161160702 Bushing, Pivot Arm 1 171160698 Screw, Socket Head w/ Patch (1/2-13 x 3-1/4") 1 181113438 Screw, Socket Head (#10-32 x 1/2") 1 191161708 Screw, Socket Button Head (10-32 x 1/4") 1 2101114962 Screw, Socket Head (5/16-18 x 1") 1 3111025342 Screw, Button Head (1/4-20 x 5/8") 1 1120028202 Tube, Extension, Full Length 1 1131107155 Screw, Phillips Pan Head Tap (#10-32 x 1-1/4") 1 1141028755 Screw, Phillips Pan Head (#10-32 x 5/8") 1 1151160904 Tube, Arm, Waterfall - Right 1 1161160905 Tube, Arm, Waterfall - Left 1 1161161701 Tube, Arm, Recline - Right 1 1161161702 Tube, Arm, Recline - Left 1 1161082910 Pad, Arm w/ Elbow Stop, Desk Length, Urethane,

Black - Right (13" L x 3" W)1 117

1082911 Pad, Arm w/ Elbow Stop, Desk Length, Urethane,Black - Left (13" L x 3" W)

1 1171082912 Pad, Arm w/ Elbow Stop, Full Length, Urethane,

Black - Right (17" L x 3" W) 1 117

1082913 Pad, Arm w/ Elbow Stop, Full Length, Urethane,Black - Left (17" L x 3" W)

1 1171161128 Cantilever Arm Assembly, Desk Length - Right 1 118 A1161129 Cantilever Arm Assembly, Desk Length - Left 1 118 A1161557 Cantilever Spreader Arm Assembly (16-20" W) 1 119 B1161558 Cantilever Spreader Arm Assembly (20-24" W) 1 119 B1120280 Tube, Spreader Bar, Adjustable, Black (16 - 20" W) 1 1201120281 Tube, Spreader Bar, Adjustable, Black (20 - 24" W) 1 120

15680X013 Anti-Rattle (1") 1 2211025195 Locknut (1/4-20) 1 2221026099 Spacer, Coved (1/4 x 11/16 x 1/2") 1 4231030949 Screw, Hex Head (1/4-20 x 1-1/2") 1 2241127158 Cover, Spreader Bar (16-20" W) 1 1251161930 Cover, Spreader Bar (20-24" W) 1 1251161972 Cantilever Arm Assembly w/ Arm Pad, Full Length -

Right1 126 C

1161973 Cantilever Arm Assembly w/ Arm Pad, Full Length -Left

1 126 C1161974 Cantilever Arm Assembly w/ Arm Pad, Recline, Full

Length - Right1 126 C


Cantilever ArmsItem


Package Assembly1161975 Cantilever Arm Assembly w/ Arm Pad, Recline, Full

Length - Left1 126 C

1161976 Cantilever Arm Assembly w/ Arm Pad, Desk Length- Right

1 126 C1161977 Cantilever Arm Assembly w/ Arm Pad, Desk Length

- Left1 126 C

1161978 Cantilever Arm Assembly w/ Arm Pad, Recline,Desk Length - Right

1 126 C1161979 Cantilever Arm Assembly w/ Arm Pad, Recline,

Desk Length - Left1 126 C

1027095 Plug Button, Black (7/8") 1 1271090191 Kit, Arm Pad w/ Screws and Elbow Stop, Full

Length, Urethane, Black (17" L x 3" W) (Pair)1 128 D

A - Includes items 2-12. B - Includes items 20-25. C - Includes items 13-17 and 27. D - Includes items 14 and 17.

NOTE:


Base Frame AssemblyNOTE: "Base Frames are not available as a service part."

Wheelchair must be returned to Invacare when Base Frame needs replacement. Contact InvacareCustomer Service for more information.


Base Frame AssemblyNOTE: "Base Frames are not available as a service part."

Wheelchair must be returned to Invacare when Base Frame needs replacement. Contact InvacareCustomer Service for more information.



See Note See Footnote 1 11 A1104863 Package, Cover, Frame Rail - Right/Left 1 12 B1101737 Cap, End, Tube, Black 1 23

40117X006 Bearing (5/8") 1 441025729 Screw, Phillips Pan Head Tap (#8-32 x 3/8") 1 151070497 Label, Caution 1 161104845 Screw, Socket Head w/ Patch (5/16-18 x 1-3/4") 1 471101719 Cap, End, Tube, Black - Right 1 181101720 Cap, End, Tube, Black - Left 1 181104762 Plate, Nut 1 291053056 Decal, Warning 1 1101110717 Ring, Tolerance 1 411

A - Item 1 is no longer available. Replacement parts may be ordered individually. B - Frame Rail Cover Package includes (3) Right and (3) Left Rail Covers. Short bases use only 2 per side.

NOTE:


Base Frame Interface HardwareFor ADJASBA Seat with TRRO/TRBKTS Option


Base Frame Interface HardwareFor ADJASBA Seat with TRRO/TRBKTS Option



1140263 Kit, Top Battery Support Bracket and MountingHardware

1 11 ABracket, Top Battery Support, Black 1 12Washer, Flat (5/16 x 5/8 x 1/16") 1 73Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 34Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 45T-Nut (5/16-18) 1 46

1140257 Kit, Seat Support Bracket w/ Mounting Hardware -Right

1 17 BScrew, Hex Head w/ Patch (5/16-18 x 5/8") 1 28Washer, Flat (5/16 x 5/8 x 1/16") 1 29T-Nut (5/16-18) 1 210Bracket, Seat Support, Black - Right 1 111

1140258 Kit, Seat Support Bracket w/ Mounting Hardware -Left

1 17 BScrew, Hex Head w/ Patch (5/16-18 x 5/8") 1 28Washer, Flat (5/16 x 5/8 x 1/16") 1 29T-Nut (5/16-18) 1 210Bracket, Seat Support, Black - Left 1 111

1140259 Kit, Front/Rear Tie-Down Brackets MountingHardware

2 112 CScrew, Hex Head (5/16-18 x 3/4") 1 413Washer, Flat (5/16 x 5/8 x 1/16") 1 414T-Nut (5/16-18) 1 415Screw, Socket Head w/ Patch (5/16-18 x 1-3/4") 1 416Screw, Socket Head (3/8-16 x 3/4") 1 217

1135963 Bracket, Battery Support, Black 1 1181140260 Kit, Front Battery Support Bracket with Mounting

Hardware1 119 D

Bracket, Battery Support, Front, Black 1 120Washer, Flat (5/16 x 5/8 x 1/16") 1 321Screw, Hex Head w/ Patch (5/16-18 x 1/2") 1 322

A - Includes items 2-6. This kit used when TRBKTS option is ordered. TRRO option uses the same retainer bracket with the addition of the WC/19 Compliance Warning Label attached

B - Includes items 8-11 C - Includes items 13-17 D - Includes items 20-22

NOTE:


Base Frame Interface HardwareFormula CG Powered Seating w/ TRBKTS Option


Base Frame Interface HardwareFormula CG Powered Seating w/ TRBKTS Option



1140263 Kit, Top Battery Support Bracket and MountingHardware

1 11 D,ABracket, Top Battery Support, Black 1 12Washer, Flat (5/16 x 5/8 x 1/16") 1 73Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 34Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 45T-Nut (5/16-18) 1 4

1144766 Bar, Clamping 1 261140259 Kit, Front/Rear Tie-Down Brackets Mounting

Hardware2 17 B

Screw, Hex Head (5/16-18 x 3/4") 1 48Washer, Flat (5/16 x 5/8 x 1/16") 1 49T-Nut (5/16-18) 1 410Screw, Socket Head w/ Patch (5/16-18 x 1-3/4") 1 411Screw, Socket Head (3/8-16 x 3/4") 1 212

1135963 Bracket, Battery Support, Black 1 1131140260 Kit, Front Battery Support Bracket with Mounting

Hardware1 114 C

Bracket, Battery Support, Front, Black 1 115Washer, Flat (5/16 x 5/8 x 1/16") 1 316Screw, Hex Head w/ Patch (5/16-18 x 1/2") 1 317

A - Includes items 2-5. This kit is used for TRBKTS option for ADJASBA Non-Powered Seating and Formula CG Powered Seating Systems. Disregard the T-nuts contained in the kit when using for the Formula CG Systems.

B - Includes items 8-12 C - Includes items 15-17 D - T-Nut not shown for a Formula CG System application.

NOTE:




1104420 Shock Assembly, Non-Heavy Duty 1 11 A,C1104421 Shock Assembly, Heavy Duty 1 11 A,D,E1041431 Shock Eyelet Assembly 1 121054481 Retainer, Shock Spring, Upper 1 131104415 Retainer, Shock Spring, Upper 1 141104413 Spring, Yellow, Non-Heavy Duty 1 151104414 Spring, Yellow, Heavy Duty 1 151104416 Retainer, Shock Spring, Lower 1 161104800 Decal, SD 300, Non-Heavy Duty 1 171104801 Decal, HD 400 Heavy Duty 1 171039659 Absorber, Shock 1 181104817 Shock Assembly, Rubber Element 1 191104812 Decal, SD 300 - Large 1 1101104827 Hardware, Rubber Element Shock 2 111 B1104445 Washer, Nylon (5/8 x 1 x 1/8") 1 4121104847 Spacer (5/16 x 5/8 x 2") 1 213

A - Includes items 2-8 B - Includes items 12-13 (Pair) C - (300 Lb. Limit For Arrow), (300 Lb. Limit For RX Before 10/9/06) (300 Lb. Limit For Torque SE, Torque 3 and Torque SP) D - (400 Lb. Limit For Arrow), (400 Lb. Limit For RX After 10/8/06) and (400 Lb. Limit For Torque SP Before 10/9/06). E - Optional for Torque SP After 10/8/06, Torque SE & Torque 3. Weight limit remains 300 Lb.

NOTE: See shock suspension mounting hardware page to find shock absorber attaching hardware.

NOTE:

Shock Absorbers




1104845 Screw, Socket Head w/ Patch (5/16-18 x 1-3/4") 1 411104881 Spacer (3/8 x 5/8 x 3/4") 1 22 C1039649 Spacer (3/8 x 5/8 x 25/32") 1 22 D1049550 Clip, Retainer 1 231026158 Locknut (5/16-18) 1 441031673 Washer, Nylon (35/64 x 1 x 1/16") 1 451104856 Spacer (5/16 x 1/2 x 3/8") 1 461026032 Washer, Nylon (11/32 x 11/16 x 1/16") 1 471070397 Screw, Hex Head (5/16-18 x 3-1/4") 1 281105474 Screw, Hex Head (5/16-18 x 3-1/2) 1 291104847 Spacer (5/16 x 5/8 x 2") 1 2101104868 Hardware, Shock Mounting 2 111 A,C1105546 Hardware, Shock Mounting 2 111 B,D

A - Includes items 1, 2 and 4-10 (Pair) B - Includes items 1-10 (Pair) C - For 22NF batteries and (Group 24 batteries without a vent tray) D - Group 24 batteries with a vent tray that is ordered with a Tarsys 2G Powered Seating System. Does not apply to Formula

CG Powered Seating System

NOTE:

Shock Suspension Mounting HardwareAll Shock Absorbers

NOTE: Gearless/Brushless and 4-pole motor suspension arms use the same shock suspension mountinghardware.


Suspension Arm and Mounting Hardware4-Pole Motors


Suspension Arm and Mounting Hardware4-Pole Motors



1104828 Kit, Suspension Arm Mounting Hardware 2 11 AScrew, Hex Head w/ Patch (5/16-18 x 2-1/2") 1 42Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") 1 43Washer (1/2" I.D. x 7/8" O.D.) 1 44Plug Button, Headtube, Black 1 25Screw, Hex Head (1/2-20 x 7") 1 26Screw, Hex Head (5/16-18 x 2") 1 27Nut, Shoulder (1/2-20) 1 28Locknut (5/16-18) 1 29Washer, Internal Tooth (M8) 1 410

1139435 Kit, Suspension Arm Mounting Hardware ForTRRO/TRBKTS Option

2 11 BScrew, Hex Head w/ Patch (5/16-18 x 2-1/2") 1 42Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") 1 43Washer (1/2" I.D. x 7/8" O.D.) 1 44Plug Button, Headtube, Black 1 25Screw, Hex Head (1/2-20 x 7") 1 26Screw, Hex Head (5/16-18 x 2-1/4") 1 27Nut, Shoulder (1/2-20) 1 28Locknut (5/16-18) 1 29Washer, Internal Tooth (M8) 1 410Washer (11/32 x 13/16 x 1/8") 1 211

1104887 Kit, Suspension Arm w/ Warning Decal, Black -Right

1 1121104888 Kit, Suspension Arm w/ Warning Decal, Black - Left 1 1121053056 Decal, Warning 1 2131142012 Nut, Hex Head Cap Shoulder (1/2-20) 1 28 C

A - Includes items 2-10 B - Includes items 2-11 and used for TRRO/TRBKTS options C - Hex Head Cap Shoulder Nut part number 1142012 is used only when a Formula CG Elevate is ordered

NOTE:


Suspension Arm and Mounting HardwareGearless/ Brushless

NOTE: TrueTrack Heavy Duty (TTHD) Gearless/Brushless motors were introduced ON-chair to StormArrow models 2/6/03.


Suspension Arm and Mounting HardwareGearless/ Brushless

NOTE: TrueTrack Heavy Duty (TTHD) Gearless/Brushless motors were introduced ON-chair to StormArrow models 2/6/03.



1115486 Kit, Suspension Arm with Warning Decal, Black -Right

1 111115487 Kit, Suspension Arm with Warning Decal, Black -

Left1 11

1053056 Decal, Warning 1 121078243 Kit, Suspension Arm Mounting Hardware 2 19 A

Washer (1/2" I.D. x 7/8" O.D.) 1 43Plug Button, Headtube, Black 1 24Screw, Hex Head (1/2-20 x 7") 1 25Nut, Shoulder (1/2-20) 1 26Screw, Hex Head (5/16-18 x 2") 1 27Locknut (5/16-18) 1 28

1135971 Kit, Suspension Mounting Hardware ForTRRO/TRBKTS Option

2 117 BNut, Shoulder (1/2-20) 1 210Screw, Hex Head (5/16-18 x 2-1/4") 1 211Plug Button, Headtube, Black 1 212Screw, Hex Head (1/2-20 x 7") 1 213Washer (1/2" I.D. x 7/8" O.D.) 1 214Washer (11/32 x 13/16 x 1/8") 1 215Locknut (5/16-18) 1 216


NOTE:


3" Anti-Tip Wheel AssemblyAll Models


3" Anti-Tip Wheel AssemblyAll Models



1104811 Anti-Tip Wheel Assembly (Pair) 2 11 ALocknut (5/16-18) 1 62Washer, Nylon (35/64 x 1 x 1/16") 1 43Spacer (5/16 x 1/2 x 3/8") 1 44Washer, Nylon (11/32 x 11/16 x 1/16") 1 45Screw, Hex Head (5/16-18 x 3-1/4") 1 26Bracket, Anti-Tipper, Black 1 27Screw, Hex Head (5/16-18 x 2-3/4") 1 28Wheel Assembly (3" x 1") 1 29Spacer (5/16 x 1/2 x 1/2") 1 410Screw, Hex Head (5/16-18 x 3-1/2) 1 211Spacer (5/16 x 5/8 x 2") 1 212

1143792 Kit, Anti-Tip Wheel Assembly (Pair) (For FormulaCG Powered Seating Only)

2 11 ALocknut (5/16-18) 1 62Washer, Nylon (35/64 x 1 x 1/16") 1 43Spacer (5/16 x 1/2 x 3/8") 1 44Washer, Nylon (11/32 x 11/16 x 1/16") 1 45Screw, Hex Head (5/16-18 x 3-1/4") 1 26Bracket, Anti-Tipper Extension, Black 1 27Screw, Hex Head (5/16-18 x 2-3/4") 1 28Wheel Assembly (3" x 1") 1 29Spacer (5/16 x 1/2 x 1/2") 1 410Screw, Hex Head (5/16-18 x 3-1/2) 1 211Spacer (5/16 x 5/8 x 2") 1 212

1101757 Wheel Assembly (3" x 1") 1 29A - Includes items 2-12 (Pair) NOTE:


Extended Anti-Tip Wheel AssemblyNOTE: Extended anti-tip wheels are standard on all 2nd Generation Powered Seating Systems ordered

with a vent tray and optional for all other configurations. Extended Anti-Tippers are optional for allFormula CG Powered Seating including when a vent tray is ordered. Field retrofitable to spring shock

suspension systems only.NOTE: Extended anti-tip wheel assembly components made for 3G storm bases ordered with vent traysand Gearless/Brushless motors between 3/01/01 - 04/14/02 are NLA, see item 1 for an extended anti-tip

wheel assembly kit.


Extended Anti-Tip Wheel AssemblyNOTE: Extended anti-tip wheels are standard on all 2nd Generation Powered Seating Systems ordered

with a vent tray and optional for all other configurations. Extended Anti-Tippers are optional for allFormula CG Powered Seating including when a vent tray is ordered. Field retrofitable to spring shock

suspension systems only.NOTE: Extended anti-tip wheel assembly components made for 3G storm bases ordered with vent traysand Gearless/Brushless motors between 3/01/01 - 04/14/02 are NLA, see item 1 for an extended anti-tip

wheel assembly kit.Item


Package Assembly1110930 Kit, Extended Anti-Tip Assembly w/ Instruction

Sheet (Pair)2 11 A

1012371 Washer, Nylon (3/8 x 7/8 x 1/16") 1 221025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 131065214 Washer, Flat (3/8 x 11/16 x 1/16") 1 141026158 Locknut (5/16-18) 1 451109184 Spacer, Grooved, Black (5/16 x 5/8 x 2") 1 161108575 Bracket, 3G Anti-Tip, Black 1 171070397 Screw, Hex Head (5/16-18 x 3-1/4") 1 281042486 Screw, Hex Head (5/16-18 x 2-3/4") 1 191070411 Bolt, Shoulder (3/8 x 2-1/2") 1 1101111713 Pin, Idle 1 1111108574 Spring, Extension (1 x 3" L) 1 1121111866 Spacer, Anti-Tip 1 2131108578 Extended Anti-Tip Caster Assembly 1 114 B1057949 Hardware, Fork Stem 1 1151056739 Plug Button, Head Tube, Black 1 1161028550 Locknut (5/8-18) 1 1171041444 Washer, Nylon (5/8 x 1-5/16 x 1/8") 1 118

40117X006 Bearing (5/8") 1 2191108583 Headtube, Anti-Tip, Black 1 1201109185 Bracket, Headtube Mounting, Black 1 1211104748 Screw, Socket Button Head w/ Patch (3/8-16 x 1/2") 1 2221065214 Washer, Flat (3/8 x 11/16 x 1/16") 1 2231109186 Fork (3" Caster) 1 1241025730 Locknut (5/16-24) 1 1251031891 Screw, Hex Head (5/16-24 x 2") 1 126

47183X047 Spacer (5/16 x 1/2 x 3/16") 1 2271101757 Wheel Assembly (3" x 1") 1 1281109558 Nut, Hex Jam (5/8-18) 1 2291110515 Instruction Sheet, Extended Anti-Tip Assembly Kit 1 1C

A - Includes items 2-14 B - Includes items 16-29 (Per Side) C - Not Shown

NOTE:


Front Rigging


Motor/Gearbox Assembly Reference ChartMKIV Electronics (4-Pole Before 10/9/06) & (GB Before 5/22/07)

4-Pole Motor and Gearbox Assemblies

Model andSide Before 2/6/03

2/6/03-1/25/04 and (2/6/03-3/14/04 For VA

Gov't Orders)1/26/04-10/8/06 and

(3/15/04-10/8/06 For VAGov't Orders)

N/AOptionalOptionalStorm Arrow (HD)(4-Pole Motor/Gearbox)

N/A1104825

1104825 -Right See Note(s) A, E See Note(s) A, E

N/A1104826

1104826 -Left See Note(s) A, E See Note(s) A, E

StandardStandardStandardStorm RX(4-Pole Motor/Gearbox)

1104823

1104823

1104823 -Right See Note(s) C, E See Note(s) E, C See Note(s) E, C

1104824

1104824

1104824 -Left See Note(s) C, E See Note(s) E, C See Note(s) E, C

StandardStandardStandard"ALL" Torque SP's

without (PERF)(4-Pole Motor/Gearbox)

1104825

1104825

1104825 -Right See Note(s) E, C See Note(s) E, C See Note(s) E, C

1104826

1104826

1104826 -Left See Note(s) E, C See Note(s) E, C See Note(s) E, C

OptionalOptionalOptionalTorque SP

with (PERF)(4-Pole Motor/Gearbox)

1104823

1104823

1104823 -Right See Note(s) E, B See Note(s) E, B See Note(s) E, B

1104824

1104824

1104824 -Left See Note(s) E, B See Note(s) E, B See Note(s) E, B

A - Used for (301-400HD) weight limits B - Performance package (PERF) offered on a Torque SP provides a 6.5 MPH rating and 300 lb. weight limit C - Used for (U300) weight limit models E - As of May 2008, the Metal Motor End Cap will be replaced with a Composite Motor End Cap. The change does not affect form,fit, function or aesthetics.

NOTE:



New - GB Non-Heavy Duty & Heavy Duty (HD) TrueTrack Motors

Model Number andSide Before 2/6/03

2/6/03-1/25/04 and (2/6/03-3/14/04 For VA



TTHD (Heavy Duty)Standard

TRUTK (Non-Heavy Duty)Standard

TRUTK (Non-Heavy Duty)StandardStorm Arrow

1153335 11155081115508-Right See Note(s) C, A1, A

1153648 N/AN/A-Right w/ Wheel Lock See Note(s) B1, B

1153336 11155081115508-Left See Note(s) D, A1, A

1153649 N/AN/A-Left w/ Wheel Lock See Note(s) B1, B

N/ATTHD (Heavy Duty)OptionalN/AStorm Arrow

N/A1153335 N/A-Right See Note(s) C, A1, A

N/A1153648 N/A-Right w/ Wheel Lock See Note(s) B1, B

N/A1153336 N/A-Left See Note(s) D, A1, A

N/A1153649 N/A-Left w/ Wheel Lock See Note(s) B1, B

TRUTK (Heavy Duty)Optional

TRUTK (Non-Heavy Duty)Optional

TRUTK (Non-Heavy Duty)OptionalStorm RX



1153336 11155081115508-Left See Note(s) A1, D, A




TRUTK (Non-Heavy Duty)OptionalTorque SP



1153336 11155081115508-Left See Note(s) A1, D, A




A - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller GasketConnector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart

NOTE:

NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 when the TTHD GB motors covered allArrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (301-351 TQHD) user weight selection until1/26/04 when the user weight limit was raised to 400 Lbs.



Warranty Replacement - GB Non-Heavy Duty & Heavy Duty (HD) TrueTrack Motors


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA



TTHD (Heavy Duty)Stamdard



1123235E N/AN/A-Right WARR RPLMT See Note(s) F

1153335E 11155091115509-Right WARR RPLMT

See Note(s) E See Note(s) G, E, A, A1, C1153648E

N/AN/A-Right WARR RPLMT w/Wheel Lock See Note(s) B1, E, B, G

1123234E-NLA N/AN/A-Left WARR RPLMT

See Note(s) F, H See Note(s) H, F1153336E

11155091115509-Left WARR RPLMT See Note(s) A1, D, E, A, G1153649E

N/AN/A-Left WARR RPLMT w/Wheel Lock See Note(s) B1, E, B, G


N/A1123235E N/A-Right WARR RPLMT See Note(s) F

N/A1153335E N/A-Right WARR RPLMT See Note(s) G, E, C, A1, A

N/A1153648E N/A-Right WARR RPLMT w/

Wheel Lock See Note(s) G, E, B1, BN/A1123234E-NLA

N/A-Left WARR RPLMT See Note(s) H, FN/A1153336E

N/A-Left WARR RPLMT See Note(s) G, E, D, A1, AN/A1153649E

N/A-Left WARR RPLMT w/Wheel Lock See Note(s) G, E, B1, B





1153335E 11155091115509-Right WARR RPLMT See Note(s) A1, C, E, A, G

1153648E N/AN/A-Right WARR RPLMT w/

Wheel Lock See Note(s) B1, E, B, G1123234E-NLA

N/AN/A-Left WARR RPLMT See Note(s) H, F1153336E

11155091115509-Left WARR RPLMT See Note(s) A1, D, E, A, G1153649E

N/AN/A-Left WARR RPLMT w/Wheel Lock See Note(s) B1, E, B, G






Warranty Replacement - GB Non-Heavy Duty & Heavy Duty (HD) TrueTrack Motors


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA




1153335E 11155091115509-Right WARR RPLMT See Note(s) A1, C, E, A, G


Wheel Lock See Note(s) G, B, E, B11123234E-NLA


11155091115509-Left WARR RPLMT See Note(s) E, G, D, A, A11153649E

N/AN/A-Left WARR RPLMT w/Wheel Lock See Note(s) B1, E, G, BA - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller GasketConnector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart E - Additional hardware is not required. Motors include a Controller Gasket Connector Kit and instruction sheets. F - For use on chairs with serial number series 07H and before. G - For use on chairs with serial number series 07I and after. H - Part #1123234E is no longer available. See part #1153336E or (1153649E if the chair was originally ordered with wheel locksbefore 10/29/07)

NOTE:




Suspension Arm and Hardware Kits Suspension Arm Kits are ordered in "addition" to Motor Kit part numbers 1153335, 1153335E, 1153336 or

1153336E for chairs manufactured before 1/1/06Side Part Number

1153679 -Right See Note(s) A

1153680 -Left See Note(s) A

A - Suspension Arm Kits will include the suspension arm, instruction sheet and mounting hardware for the motor, wheel, brake leverand fender. The new suspension arm will have the holes necessary to accept the brake lever stop plate

NOTE:


Motor/Gearbox Assembly Reference ChartFor MK6i Electronics (4-Pole After 10/8/06) & (GB After 5/21/07)

4-Pole Motor and Gearbox Assemblies

Model andSide Part Number

Storm RX (Std.) (400 Lb. Wgt. Limit) & Torque SE (Std.Thru 4/8/07, see PERF After 4/8/07) (300 Lb. Wgt. Limit)

Storm RX & Torque SE(4-Pole Motor/Gearbox)

1144777-Right1153667

-Right See Note(s) B1144778-Left1153668

-Left See Note(s) BStandard (300 Lb. Weight Limit)Storm Torque 3

(4-Pole Motor/Gearbox)1152617-Right1153669

-Right See Note(s) B1152618-Left1153670

-Left See Note(s) B

Standard (300 Lb. Weight Limit)Torque SP

with (PERF)(4-Pole Motor/Gearbox)


1153665 -Right See Note(s) B


1153666 -Left See Note(s) B

(Optional Thru 4/8/07 & Std. After 4/8/07) (300 Lb.Weight Limit)

Torque SE with (PERF)(4-Pole Motor/Gearbox)



A - Performance package (PERF) provides a 6.5 MPH rating with (300 Lb. weight Limit) B - Motors with a ferrite bead attached are used when a Formula CG Powered Seating System is ordered with smart actuators(SMTACTS). Torque SE models do not use smart actuators (SMTACTS)

NOTE:

Torque SE introduced 11/15/06, Torque 3 introduced 12/19/07



New - GB Heavy Duty (HD) TrueTrack Motors


Storm Arrow (Std.) (300 Lb. & 400 Lb. Weight Limits)Storm Arrow1153335

-Right See Note(s) A, A11153648

-Right w/ Wheel Lock See Note(s) B1, B1153336

-Left See Note(s) A, A11153649

-Left w/ Wheel Lock See Note(s) B1, BStorm RX (Optional) (400 Lb. Weight Limit)Storm RX

1153335 -Right See Note(s) A1, A

1153648 -Right w/ Wheel Lock See Note(s) B1, B

1153336 -Left See Note(s) A1, A

1153649 -Left w/ Wheel Lock See Note(s) B1, B

(Optional) (300 Lb. Weight Limit)Torque SP/SE1153335

-Right See Note(s) A1, A1153648

-Right w/ Wheel Lock See Note(s) B1, B1153336

-Left See Note(s) A1, A1153649

-Left w/ Wheel Lock See Note(s) B1, B(Optional) (300 Lb. Weight Limit)Torque 3



A - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller MotorGasket Connector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washerand A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Motor Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Motor GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm

NOTE:



Warranty Replacement - GB Heavy Duty (HD) TrueTrack Motors


Storm Arrow (Std.) (300 Lb. & 400 Lb. Weight Limits)Storm Arrow1123235E

-Right WARR RPLMT See Note(s) D1153335E

-Right WARR RPLMT See Note(s) A, A1, A2, C, E1153648E

-Right WARR RPLMT w/ Wheel Lock See Note(s) A2, B, B1, E, C1123234E-NLA

-Left WARR RPLMT See Note(s) F, D1153336E

-Left WARR RPLMT See Note(s) A, A1, A2, E, C1153649E

-Left WARR RPLMT w/ Wheel Lock See Note(s) B1, C, B, A2, EStorm RX (Optional) (400 Lb. Weight Limit)Storm RX

1123235E -Right WARR RPLMT See Note(s) D

1153335E -Right WARR RPLMT See Note(s) C, E, A2, A, A1

1153648E -Right WARR RPLMT w/ Wheel Lock See Note(s) C, B1, E, B, A2

1123234E-NLA -Left WARR RPLMT See Note(s) D, F

1153336E -Left WARR RPLMT See Note(s) A, E, C, A2, A1

1153649E -Left WARR RPLMT w/ Wheel Lock See Note(s) C, B1, B, E, A2

(Optional) (300 Lb. Weight Limit)Torque SP/SE1123235E


-Right WARR RPLMT See Note(s) E, C, A, A1, A21153648E

-Right WARR RPLMT w/ Wheel Lock See Note(s) C, B1, E, B, A21123234E-NLA

-Left WARR RPLMT See Note(s) D, F1153336E

-Left WARR RPLMT See Note(s) E, C, A, A1, A21153649E

-Left WARR RPLMT w/ Wheel Lock See Note(s) C, B1, E, B, A2(Optional) (300 Lb. Weight Limit)Torque 3


1153335E -Right WARR RPLMT See Note(s) A2, A, E, C, A1



Warranty Replacement - GB Heavy Duty (HD) TrueTrack Motors


1123234E-NLA -Left WARR RPLMT See Note(s) F, D

1153336E -Left WARR RPLMT See Note(s) A, A2, A1, E, C

A - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller MotorGasket Connector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washerand A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Motor Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. A2 - A Refurbished Motor is used for a warranty replacement B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Motor GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm C - Additional hardware is not required. Motors include a Controller Gasket Connector Kit and instruction sheets. D - For use on chairs with serial number series 07H and before E - For use on chairs with serial number series 07I and after F - Part #1123234E is no longer available. See part #1153336E or (1153649E if the chair was originally ordered with wheel locksbefore 10/29/07)

NOTE:


4-Pole Motors and GearboxesFor MKIV Electronics Before 10/9/06

NOTE: 4-Pole motors are standard on Ranger X, all Torque SP weight limits and available on Arrow(301-400HD) models.




Ranger X and Torque SP w/ (PERF)

Item Number DescriptionRanger X and

Torque SP w/ (PERF)Right Side

See Note(s) B


Left Side

See Note(s) B1104824

1104823

Motor/ Gearbox1. See Note(s) G See Note(s) G1086224

1086223

Gear Box2. See Note(s) E See Note(s) E

11048701104869Motor Assembly

with Decals

3.See Note(s) A

10702951070294Brake Repair Kit4.1104402-NLA1104402-NLABrake Cover

with Screws5.1070296

1070296

Brushes w/ Caps6. See Note(s) H See Note(s) HSee Item 5See Item 5Screw, SHC

(8-32 x 1/4")7.5165204-NLA

5165204-NLA

Coupling w/ Cup (1"

Diameter)8. See Note(s) C See Note(s) C50000X007

50000X007

Coupling w/ Cup (1-5/16"

Diameter)8. See Note(s) D See Note(s) D1043594

1043594

Screw, SHC

(1/4-20 x 1-1/8")9. See Note(s) C See Note(s) E See Note(s) E

1108978

1108978

Screw, SHC(M6 x 1 x 20MM)9. See Note(s) E See Note(s) E

11017251101725Cap, Brake10.10829851082985Slotted Plate11.

10502X00110502X001Lockwasher(1/4 x 1/2 x 1/16")12.

11047971104797Decal, Drive/Push13.11047981104798Decal, 3200 RPM14.10436281043628Screw, HHC w/ Patch

(5/16-18 x 2-1/2")15.11042571104257Screw, HHC w/ Patch

(5/16-18 x 1-1/4")16.10232631023263Washer, Lock

Internal Tooth (M8)17.11048941104894Motor Mounting

Hardware (Per Side)18.1143143

1143143

Harness, Motor Cable

Extension19. See Note(s) F See Note(s) F





Item Number DescriptionRanger X and

Torque SP w/ (PERF)Right Side

See Note(s) B


Left Side

See Note(s) B

11049131104913Instruction Sheet, Decal ApplicationNot Shown

A - Decal application instruction sheet is included. B - Performance package (PERF) offered on a TorqueSP provides a 6.5 MPH rating. C - Coupling with Cup for chairs manufactured before 11/12/01 - use part # 50000X007 as this part's replacement. D - After 11/11/01 Coupling with Cup was resized from approximately 1" to 1-5/16" diameter and can be used as a directreplacement for part number 5165204 E - When a new gearbox or mounting screws are ordered, (2 ea.) metric and (2 ea.) non-metric screws (item 9) must be ordered.Invacare Corp. utilizes alternate suppliers for this part number. F - Motor Extension Cables are used only when a Retrofit Seating System Kit is ordered with MK6i upgraded electronics G - As of May 2008, the Metal Motor End Cap will be replaced with a Composite Motor End Cap. The change does not affect form,fit, function or aesthetics. H - Kit Includes (4) Brushes, (4) Brush Caps and Instruction Sheet.

NOTE:




Arrow HD and ALL Torque SP's Except Torque SP w/ (PERF)

Item Number Description

Arrow HD andAll Torque SP's

Except Torque SP w/ (PERF)Right Side

See Note(s) B


Except Torque SP w/ (PERF)Left Side

See Note(s) B

1104826

1104825 Motor/ Gearbox1. See Note(s) G See Note(s) G

1086226

1086225 Gear Box2. See Note(s) E See Note(s) E


with Decals

3.See Note(s) A



1070296

Brushes w/ Caps6. See Note(s) H See Note(s) HSee Item 5See Item 5Screw, SHC

(8-32 x 1/4")7.5165204-NLA

5165204-NLA

Coupling w/ Cup (1"

Diameter)8. See Note(s) C See Note(s) C50000X007

50000X007

Coupling w/ Cup (1-5/16"

Diameter)8. See Note(s) D See Note(s) D1043594

1043594

Screw, SHC

(1/4-20 x 1-1/8")9. See Note(s) E See Note(s) E1108978

1108978

Screw, SHC

(M6 x 1 x 20MM)9. See Note(s) E See Note(s) E11017251101725Cap, Brake10.10829851082985Slotted Plate11.

10502X00110502X001Lockwasher (1/4 x 1/2 x 1/16")12.



(5/16-18 x 1-1/4")16.10232631023263Washer, Lock


Hardware (Per Side)18.1143143

1143143

Harness, Motor Cable

Extension19. See Note(s) F See Note(s) F154




Arrow HD and ALL Torque SP's Except Torque SP w/ (PERF)



Except Torque SP w/ (PERF)Right Side

See Note(s) B


Except Torque SP w/ (PERF)Left Side

See Note(s) B

11049131104913Instruction Sheet,Decal ApplicationNot Shown

A - Decal application instruction sheet is included. B - Performance package (PERF) offered on a TorqueSP provides a 6.5 MPH rating. C - Coupling with Cup for chairs manufactured before 11/12/01 - Use part # 50000X007 as this part's replacement. D - After 11/11/01 Coupling with Cup was resized from approximately 1" to 1-5/16" diameter and can be used as a directreplacement for part number 5165204 E - When a new gearbox or mounting screws are ordered, (2 ea.) metric and (2 ea.) non-metric screws (item 9) must be ordered.Invacare Corp. utilizes alternate suppliers for this part number. F - Motor Extension Cables are used only when a Retrofit Seating System Kit is ordered with MK6i upgraded electronics G - As of May 2008, the Metal Motor End Cap will be replaced with a Composite Motor End Cap. The change does not affect form,fit, function or aesthetics. H - Kit includes (4) Brushes, (4) Brush Caps and Instruction Sheet.

NOTE:


4-Pole Motors and Gearboxes For MK6i ElectronicsFor MK6i Electronics (After 10/8/06)



Torque SP w/ (PERF) (Std.) & Torque SE (Optional Thru 4/8/07, Std. After 4/8/07)


(PERF) Torque SP(Standard) & Torque SE

(Optional Thru 4/8/07, Std.After 4/8/07) Right Side

See Note(s) B

(PERF) Torque SP(Standard) & Torque SE

(Optional Thru 4/8/07, Std.After 4/8/07)

Left Side

See Note(s) B11447761144775Motor/ Gearbox1.1153666

1153665

Motor/ Gearbox with Ferrite

Bead1. See Note(s) D See Note(s) D1086224

1086223

Gear Box2. See Note(s) C See Note(s) C


with Decals

3.See Note(s) A

1153672

1153671

Motor Assembly with Decalsand Ferrite Bead3. See Note(s) D See Note(s) D



1070296

Brushes w/ Caps6. See Note(s) E See Note(s) ESee Item 5See Item 5Screw, SHC

(8-32 x 1/4")7.50000X00750000X007Coupling w/ Cup (1-5/16"

Diameter)8.1043594

1043594

Screw, SHC

(1/4-20 x 1-1/8")9. See Note(s) C See Note(s) C1108978

1108978

Screw, SHC

(M6 x 1 x 20MM)9. See Note(s) C See Note(s) C11017251101725Cap, Brake10.10829851082985Slotted Plate11.

10502X00110502X001Lockwasher(1/4 x 1/2 x 1/16")12.



(5/16-18 x 1-1/4")16.10232631023263Washer, Lock


Hardware (Per Side)18.11049131104913Instruction Sheet,

Decal ApplicationNot Shown



A - Decal application instruction sheet is included. B - Performance package (PERF) offered on a TorqueSP & Torque SE provides a 6.5 MPH rating. C - When a new gearbox or mounting screws are ordered, (2 ea.) metric and (2 ea.) non-metric screws (item 9) must be ordered.Invacare Corp. utilizes alternate suppliers for this part number. D - Motors with a ferrite bead attached are used when a Formula CG Powered Seating System is ordered with smart actuators(SMTACTS).The ferrite bead is a non-serviceable item. E - Kit includes (4) Brushes, (4) Brush Caps and Instruction Sheet.

NOTE:



Ranger X (Std.) (400 Lb. Limit) & Torque SE (Std. Thru 4/8/07, see PERF After 4/8/07)(300 Lb. Limit)


Ranger X (Std.) (400 Lb.Limit) & Torque SE (Std.Thru 4/8/07, see PERF

After 4/8/07) (300 Lb. Limit)Right Side


After 4/8/07) (300 Lb. Limit)Left Side

11447781144777Motor/ Gearbox1.1153668

1153667


Bead1. See Note(s) C See Note(s) C See Note(s) C

1086226 1086225Gear Box2.

See Note(s) B See Note(s) B


with Decals

3.See Note(s) A

1153672

1153671

Motor Assemblywith Decals and Ferrite

Bead

3.See Note(s) A See Note(s) C See Note(s) C



1070296

Brushes w/ Caps6. See Note(s) D See Note(s) DSee Item 5See Item 5Screw, SHC


Diameter)8.1043594

1043594

Screw, SHC

(1/4-20 x 1-1/8")9. See Note(s) B See Note(s) B1108978

1108978

Screw, SHC

(M6 x 1 x 20MM)9. See Note(s) B See Note(s) B11017251101725Cap, Brake10.10829851082985Slotted Plate11.

10502X00110502X001Lockwasher (1/4 x 1/2 x 1/16")12.



(5/16-18 x 1-1/4")16.10232631023263Washer, Lock


Hardware (Per Side)18.



Ranger X (Std.) (400 Lb. Limit) & Torque SE (Std. Thru 4/8/07, see PERF After 4/8/07)(300 Lb. Limit)



After 4/8/07) (300 Lb. Limit)Right Side


After 4/8/07) (300 Lb. Limit)Left Side

11049131104913Instruction Sheet,Decal ApplicationNot Shown

A - Decal application instruction sheet is included. B - When a new gearbox or mounting screws are ordered, (2 ea.) metric and (2 ea.) non-metric screws (item 9) must be ordered.Invacare Corp. utilizes alternate suppliers for this part number. C - Motors with a ferrite bead attached are used when a Formula CG Powered Seating System is ordered with smart actuators(SMTACTS). Torque SE models do not use smart actuators. The ferrite bead is a non-serviceable item. D - Kit includes (4) Brushes, (4) Brush Caps and Instruction Sheet.

NOTE:

Torque SE introduced 11/15/06



Torque 3 (Std.)

Item Number DescriptionTorque 3 (Std.) (300 Lb.

Limit)Right Side

Torque 3 (Std.) (300 Lb.Limit)

Left Side

11526181152617Motor/ Gearbox1.1153670

1153669


Bead1. See Note(s) C See Note(s) C1152614

1152613Gear Box2. See Note(s) B See Note(s) B


with Decals

3.See Note(s) A

1153672

1153671

Motor Assemblywith Decals and Ferrite

Bead

3.See Note(s) A See Note(s) C See Note(s) C



1070296

Brushes w/ Caps6. See Note(s) D See Note(s) DSee Item 5See Item 5Screw, SHC


Diameter)8.1043594

1043594

Screw, SHC

(1/4-20 x 1-1/8")9. See Note(s) B See Note(s) B1108978

1108978

Screw, SHC

(M6 x 1 x 20MM)9. See Note(s) B See Note(s) B11017251101725Cap, Brake10.10829851082985Slotted Plate11.

10502X00110502X001Lockwasher (1/4 x 1/2 x 1/16")12.



(5/16-18 x 1-1/4")16.10232631023263Washer, Lock


Hardware (Per Side)18.11049131104913Instruction Sheet,

Decal ApplicationNot Shown



A - Decal application instruction sheet is included. B - When a new gearbox or mounting screws are ordered, (2 ea.) metric and (2 ea.) non-metric screws (item 9) must be ordered.Invacare Corp. utilizes alternate suppliers for this part number. C - Motors with a ferrite bead attached are used when a Formula CG Powered Seating System is ordered with smart actuators(SMTACTS). The ferrite bead is a non-serviceable item. D - Kit includes (4) Brushes, (4) Brush Caps and Instruction Sheet.

NOTE:

Torque 3 introduced 12/19/07


GB (TrueTrack) Non-Heavy Duty Motors and HardwareFor MKIV Electronics Only

NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 whenthe TTHD GB motors covered all Arrow user weight limits STANDARD. NOTE: GB motors were not

available with the Torque SP (301-351 TQHD) user weight selection until 1/26/04 when the user weightlimit was raised to 400 Lbs.







1115509 WARR RPLMT - Kit, Motor, GB Non-Heavy Dutywith Instruction Sheet

1 11 ESee Chart Item #1a New Motor - Date Application Reference

Chart1 11a D

See Chart Item #1b Warranty/Refurbished Motor - DateApplication Reference Chart

1 11b D1078213 Pin, Alignment, Black 1 121018739 Washer (1/4 x 5/8 x 3/32") 1 131078214 Screw, Hex Head w/ Patch (1/4-20 x 1/2") 1 141085633 Screw, Hex Head w/ Patch (M8 x 1-1/4 x 45mm) 1 451105600 Handle, Brake Release, Black - Right 1 161105601 Handle, Brake Release, Black - Left 1 161106532 Handle, Brake Release, Black - Right (Power

Elevating Seat Only)1 16

1106533 Handle, Brake Release, Black - Left (PowerElevating Seat Only)

1 161078228 Screw, Slotted Hex Head w/ Patch (#10-32 x 5/16") 1 171079247 Washer, Flat (21/64 x 53/64 x 7/64") 1 481104872 Hardware, Motor Mounting - Right 1 191104873 Hardware, Motor Mounting - Left 1 191108769 Hardware, Motor Mounting - Right (Power Elevating

Seat Only)1 19

1108770 Hardware, Motor Mounting - Left (Power ElevatingSeat Only)

1 191112955-NLA Kit, Repair, GB Motor, Anti-Rattle with Instruction

Sheet2 110 B

1112828 Instruction Sheet, GB Motor Anti-Rattle Repair Kit 1 1CB - Service Kit for two motors include 2 each hex head nuts, washers, hub keys and O-rings. Individual components are not

available. C - not shown D - Refer to the "Motor Date Application Reference Chart" for selecting motor E - Item 1 part number 1115509 is a warranty replacement motor for part number 1115508.

NOTE:

Item #1a New Motor - Date Application Reference Chart


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA












2/6/03-1/25/04 and (2/6/03-3/14/04 For VA



1153335 11155081115508-Right

See Note(s) C See Note(s) C, A1, A1153648

N/AN/A-Right w/ Wheel Lock See Note(s) B1, B1153336

11155081115508-Left See Note(s) D, A1, A1153649

N/AN/A-Left w/ Wheel Lock See Note(s) B1, BN/ATTHD (Heavy Duty)

OptionalN/AStorm ArrowN/A1153335

N/A-Right See Note(s) C, A1, AN/A1153648

N/A-Right w/ Wheel Lock See Note(s) B1, BN/A1153336

N/A-Left See Note(s) D, A1, AN/A1153649

N/A-Left w/ Wheel Lock See Note(s) B1, BTRUTK (Heavy Duty)

OptionalTRUTK (Non-Heavy Duty)


OptionalStorm RX1153335

11155081115508-Right See Note(s) C, A1, A1153648


11155081115508-Left See Note(s) D, A1, A1153649

N/AN/A-Left w/ Wheel Lock See Note(s) B1, BTRUTK (Heavy Duty)



OptionalTorque SP1153335

11155081115508-Right See Note(s) C, A1, A1153648


11155081115508-Left See Note(s) D, A, A1







2/6/03-1/25/04 and (2/6/03-3/14/04 For VA




A - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller MotorGasket Connector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washerand A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Motor Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Motor GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart

NOTE:






Item #1b Warranty Replacement Motor - Date Application Reference Chart


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA







1153335E 11155091115509-Right WARR RPLMT See Note(s) G, A, A1, A2, C, E


Wheel Lock See Note(s) B1, B, G, E, A21123234E-NLA

N/AN/A-Left WARR RPLMT See Note(s) F, H1153336E

11155091115509-Left WARR RPLMT See Note(s) A2, A1, D, A, G, E1153649E

N/AN/A-Left WARR RPLMT w/Wheel Lock See Note(s) E, G, B1, A2, B



N/A1153335E N/A-Right WARR RPLMT See Note(s) A2, C, E, G, A1, A


Wheel Lock See Note(s) G, E, B1, B, A2N/A1123234E-NLA


N/A-Left WARR RPLMT See Note(s) E, G, D, A2, A1, AN/A1153649E

N/A-Left WARR RPLMT w/Wheel Lock See Note(s) G, E, B1, B, A2





1153335E 11155091115509-Right WARR RPLMT See Note(s) A2, A1, C, A, G, E


Wheel Lock See Note(s) B, B1, E, A2, G1123234E-NLA


11155091115509-Left WARR RPLMT See Note(s) A2, A1, D, A, G, E167





Item #1b Warranty Replacement Motor - Date Application Reference Chart


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA



1153649E N/AN/A-Left WARR RPLMT w/

Wheel Lock See Note(s) B, B1, E, A2, GTRUTK (Heavy Duty)



OptionalTorque SP1123235E

N/AN/A-Right WARR RPLMT See Note(s) F1153335E

11155091115509-Right WARR RPLMT See Note(s) A2, A1, C, A, G, E1153648E

N/AN/A-Right WARR RPLMT w/Wheel Lock See Note(s) B, B1, E, A2, G

1123234E-NLA N/AN/A-Left WARR RPLMT See Note(s) H, F

1153336E 11155091115509-Left WARR RPLMT See Note(s) G, E, D, A2, A1, A


Wheel Lock See Note(s) B, B1, E, A2, GA - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller MotorGasket Connector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washerand A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Motor Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. A2 - A Refurbished Motor is used for a warranty replacement B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Motor GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart E - Additional hardware is not required. Motors include a Controller Gasket Connector Kit and instruction sheets. F - For use on chairs with serial number series 07H and before. G - For use on chairs with serial number series 07I and after. H - Part #1123234E is no longer available. See part #1153336E or (1153649E if the chair was originally ordered with wheel locksbefore 10/29/07)

NOTE:



GB (TrueTrack) Heavy Duty Motors and HardwareFor Both MKIV Elec.'s Before 5/22/07 & MK6i After 5/21/07









1116697 Kit, GB Heavy Duty Motor Mounting Hardware -Right

1 11 A,B,B1Plate, Lever 1 12Washer (1/4 x 23/32 x 1/16") 1 23Lockwasher (1/4 x 15/32 x 1/64") 1 24Screw, Socket Button (1/4-20 x 3/4") 1 15Brake Lever Assembly - Right 1 16Locknut (1/4-20) 1 19Washer, Nylon (35/64 x 1 x 1/16") 1 210Insert, Lever 1 111Washer, Belleville (1/2 x 1 x 1/32") 1 112Screw, Socket Button Head (1/4-20X2-1/4") 1 113Plate, Stop 1 114Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 215Cotter, Locking Bow-Tie (1/4" Shaft) 1 216Linkage, Rod 1 117Spacer, Top, Black, GB Motor 1 118Spacer, Bottom, Black, GB Motor 1 119Washer, Flat (21/64 x 53/64 x 7/64") 1 320Screw, Hex Head (5/16-18 x 1-1/2") 1 121Screw, Hex Head w/ Patch (M8 x 1.25 x 60mm) 1 422Kit, GB HD Controller Gasket Connector 1 1

1116698 Kit, GB Heavy Duty Motor Mounting Hardware - Left 1 11 A,B,B1Plate, Lever 1 12Washer (1/4 x 23/32 x 1/16") 1 23Lockwasher (1/4 x 15/32 x 1/64") 1 24Screw, Socket Button (1/4-20 x 3/4") 1 15Brake Lever Assembly - Left 1 16Locknut (1/4-20) 1 19Washer, Nylon (35/64 x 1 x 1/16") 1 210Insert, Lever 1 111Washer, Belleville (1/2 x 1 x 1/32") 1 112Screw, Socket Button Head (1/4-20X2-1/4") 1 113Plate, Stop 1 114Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 215Cotter, Locking Bow-Tie (1/4" Shaft) 1 216Linkage, Rod 1 117Spacer, Top, Black, GB Motor 1 118Spacer, Bottom, Black, GB Motor 1 119Washer, Flat (21/64 x 53/64 x 7/64") 1 320







Screw, Hex Head (5/16-18 x 1-1/2") 1 121Screw, Hex Head w/ Patch (M8 x 1.25 x 60mm) 1 422Kit, GB HD Controller Gasket Connector 1 1

1153519 Kit, Brake Lever Assembly with Mounting Hardware- Right

1 123 B,I,B1Plate, Lever 1 12Washer (1/4 x 23/32 x 1/16") 1 23Lockwasher (1/4 x 15/32 x 1/64") 1 24Screw, Socket Button (1/4-20 x 3/4") 1 15Brake Lever Assembly - Right 1 16Locknut (1/4-20) 1 19Washer, Nylon (35/64 x 1 x 1/16") 1 210Insert, Lever 1 111Washer, Belleville (1/2 x 1 x 1/32") 1 112Screw, Socket Button Head (1/4-20X2-1/4") 1 113Plate, Stop 1 114Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 215

1153520 Kit, Brake Lever Assembly with Mounting Hardware- Left

1 123 B,I,B1Plate, Lever 1 12Washer (1/4 x 23/32 x 1/16") 1 23Lockwasher (1/4 x 15/32 x 1/64") 1 24Screw, Socket Button (1/4-20 x 3/4") 1 15Brake Lever Assembly - Left 1 16Locknut (1/4-20) 1 19Washer, Nylon (35/64 x 1 x 1/16") 1 210Insert, Lever 1 111Washer, Belleville (1/2 x 1 x 1/32") 1 112Screw, Socket Button Head (1/4-20X2-1/4") 1 113Plate, Stop 1 114Screw, Hex Head w/ Patch (5/16-18 x 3/4") 1 215

1136024 Package, Rubber Tip, Wheel Lock Handle, Black 10 171114835 Decal, GB Drive/Push 1 181133188 Gasket, Motor Connector 1 124 C

See Chart Item #25 New Motor - Date Application ReferenceChart MKIV (Before 5/22/07)

1 125 DSee Chart Item #25a Warranty/Refurbished Motor - Date

Application Reference Chart MKIV (Before 5/22/07)1 125a D

See Chart Item #25b New Motor - Date Application ReferenceChart MK6i (After 5/21/07)

1 125b D







See Chart Item #25c Warranty/Refurbished Motor - DateApplication Reference Chart MK6i (After 5/21/07)

1 125c DSee Chart Suspension Arm Kits (Used for Chairs

Manufactured Before 1/1/06 Only)1 1F

1144925 Kit, Stand-Off Screw with Lockwasher 1 2E1110531 Instruction Sheet, GB Motor Replacement For 3G

Storm1 1F

1134214 Kit, GB HD Controller Gasket Connector 1 1F,G,G11115476 Spring, Torsion - Right 1 1F,H1115477 Spring, Torsion - Left 1 1F,H

A - Includes items 2-6, 9-22. Item #7 Rubber Tip and item #8 GB drive/Push Decal is included with item #6 Brake Lever Assembly. A Controller Gasket Connector Kit part #1134214 created 10/26/07 (not shown) will also be included.

B - The brake release mechanism was revised 10/29/07 eliminating the Torsion Spring, adding a bellville washer and a stop plate to limit travel of the Brake Release Lever. If a customer requests just the Torsion Spring for chairs before 10/29/07,

B1 - order part #1115476 RT or 1115477 LT otherwise order the Brake Lever and Mounting Hardware Kit item #23 that retrofits to all GB HD Motors in the field.

C - Connector Gasket added to all GB HD Motors 5/16/06 and comes standard when a new motor is ordered. Gasket can be attached to all GB HD Motors in the field before 5/16/06 as well

D - Refer to the "Motor Date Application Reference Charts" for selecting a motor E - Stand-Off Screw with Lockwasher kit used to secure the controller cable on the GB motors F - Not Shown G - Kit was created 10/26/07 and attaches to the controller motor cables. Includes 2 ea. GB HD Controller Gasket

Connectors, 2 ea. Silicon Lubricant Packets, 1 ea. Instruction Sheet. Individual components are non-saleable. G1 - The kit can retrofit to existing GB HD controllers in the field H - Used for brake release mechanisms manufactured for chairs before 10/29/07. Torsion Spring no longer used after

10/28/07 I - Includes items 2-6 and 9-15

NOTE:

Item #25 New Motor - Date Application Reference Chart MKIV (Before 5/22/07)


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA



TTHD (Heavy Duty)Standard



1153335 11155081115508-Right See Note(s) A, A1, C

1153648 N/AN/A-Right w/ Wheel Lock See Note(s) B, B1


1153649 N/AN/A-Left w/ Wheel Lock See Note(s) B, B1






Item #25 New Motor - Date Application Reference Chart MKIV (Before 5/22/07)


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA



N/A1153335 N/A-Right See Note(s) A1, C, A

N/A1153648 N/A-Right w/ Wheel Lock See Note(s) B1, B

N/A1153336 N/A-Left See Note(s) D, A1, A

N/A1153649 N/A-Left w/ Wheel Lock See Note(s) B1, B



















A - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller GasketConnector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart

NOTE:






Item #25a Warranty Replacement Motor - Date Application Reference Chart MKIV(Before 5/22/07)


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA







1153335E 11155091115509-Right WARR RPLMT See Note(s) A1, A, A2, C, E, G


Wheel Lock See Note(s) A2, B, B1, E, G1123234E-NLA

N/AN/A-Left WARR RPLMT See Note(s) F, H1153336E

11155091115509-Left WARR RPLMT See Note(s) A1, A, A2, D, E, G1153649E

N/AN/A-Left WARR RPLMT w/Wheel Lock See Note(s) G, E, B1, B, A2



N/A1153335E N/A-Right WARR RPLMT See Note(s) E, G, C, A2, A1, A


Wheel Lock See Note(s) G, E, B1, B, A2N/A1123234E-NLA


N/A-Left WARR RPLMT See Note(s) E, G, D, A2, A1, AN/A1153649E

N/A-Left WARR RPLMT w/Wheel Lock See Note(s) G, E, B1, B, A2





1153335E 11155091115509-Right WARR RPLMT See Note(s) A2, A1, C, A, G, E


Wheel Lock See Note(s) B, B1, E, A2, G1123234E-NLA

N/AN/A-Left WARR RPLMT See Note(s) H, F





Item #25a Warranty Replacement Motor - Date Application Reference Chart MKIV(Before 5/22/07)


2/6/03-1/25/04 and (2/6/03-3/14/04 For VA



1153336E 11155091115509-Left WARR RPLMT See Note(s) A2, A1, D, A, G, E


Wheel Lock See Note(s) G, E, B1, B, A2TRUTK (Heavy Duty)



OptionalTorque SP1123235E

N/AN/A-Right WARR RPLMT See Note(s) F1153335E

11155091115509-Right WARR RPLMT See Note(s) E, C, A2, A1, A, G1153648E

N/AN/A-Right WARR RPLMT w/Wheel Lock See Note(s) G, E, B1, B, A2

1123234E-NLA N/AN/A-Left WARR RPLMT See Note(s) H, F

1153336E 11155091115509-Left WARR RPLMT See Note(s) A, A1, A2, D, E, G


Wheel Lock See Note(s) G, E, B1, B, A2A - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller GasketConnector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. A2 - A Refurbished Motor is used for a warranty replacement B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly.Refer to the Suspension Arm Kits chart E - Additional hardware is not required. Motors include a Controller Gasket Connector Kit and instruction sheets. F - For use on chairs with serial number series 07H and before. G - For use on chairs with serial number series 07I and after. H - Part #1123234E is no longer available. See part #1153336E or (1153649E if the chair was originally ordered with wheel locksbefore 10/29/07)

NOTE:






Item #25b New Motor - Date Application Reference Chart MK6i (After 5/21/07)


Storm Arrow (Std.) (300 Lb. & 400 Lb. Weight Limits)Storm Arrow1153335

-Right See Note(s) A, A11153648

-Right w/ Wheel Lock See Note(s) B, B11153336

-Left See Note(s) A1, A1153649

-Left w/ Wheel Lock See Note(s) B1, BStorm RX (Optional) (400 Lb. Weight Limit)Storm RX


1153648 -Right w/ Wheel Lock See Note(s) B1, B

1153336 -Left See Note(s) A, A1

1153649 -Left w/ Wheel Lock See Note(s) B1, B

(Optional) (300 Lb. Weight Limit)Torque SP/SE1153335

-Right See Note(s) A1, A1153648

-Right w/ Wheel Lock See Note(s) B, B11153336

-Left See Note(s) A, A11153649

-Left w/ Wheel Lock See Note(s) B1, B(Optional) (300 Lb. Weight Limit)Torque 3

1153335 -Right See Note(s) A, A1


A - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller GasketConnector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm

NOTE:





Item #25c Warranty Replacement Motor - Date Application Reference Chart MK6i (After5/21/07)


Storm Arrow (Std.) (300 Lb. & 400 Lb. Weight Limits)Storm Arrow1123235E


-Right WARR RPLMT See Note(s) E, C, A, A1, A21153648E

-Right WARR RPLMT w/ Wheel Lock See Note(s) E, B, B1, C, A21123234E-NLA


-Left WARR RPLMT See Note(s) E, C, A2, A1, A1153649E

-Left WARR RPLMT w/ Wheel Lock See Note(s) E, A2, B, B1, CStorm RX (Optional) (400 Lb. Weight Limit)Storm RX


1153335E -Right WARR RPLMT See Note(s) A2, A1, A, E, C

1153648E -Right WARR RPLMT w/ Wheel Lock See Note(s) E, C, B1, A2, B

1123234E-NLA -Left WARR RPLMT See Note(s) D, F

1153336E -Left WARR RPLMT See Note(s) A, A1, A2, C, E

1153649E -Left WARR RPLMT w/ Wheel Lock See Note(s) B1, A2, B, E, C

(Optional) (300 Lb. Weight Limit)Torque SP/SE1123235E


-Right WARR RPLMT See Note(s) A2, A, A1, C, E1153648E

-Right WARR RPLMT w/ Wheel Lock See Note(s) B1, C, B, A21123234E-NLA


-Left WARR RPLMT See Note(s) A, A1, A2, C, E1153649E

-Left WARR RPLMT w/ Wheel Lock See Note(s) A2, B, B1, E, C(Optional) (300 Lb. Weight Limit)Torque 3





Item #25c Warranty Replacement Motor - Date Application Reference Chart MK6i (After5/21/07)



1153335E -Right WARR RPLMT See Note(s) A1, C, A2, A, E

1123234E-NLA -Left WARR RPLMT See Note(s) F, D

1153336E -Left WARR RPLMT See Note(s) A, A2, A1, E, C

A - Part #'s 1153335/6 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware and (Controller GasketConnector kit). The brake release mechanism was revised 10/29/07 eliminating the torsion spring, adding a bellville washer and A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector wasintroduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also. A2 - A Refurbished Motor is used for a warranty replacement B - Part #'s 1153648/9 and WARR RPLMT #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller GasketConnector kit) and B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped withWheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm C - Additional hardware is not required. Motors include a Controller Gasket Connector Kit and instruction sheets. D - For use on chairs with serial number series 07H and before. E - For use on chairs with serial number series 07I and after. F - Part #1123234E is no longer available. See part #1153336E or (1153649E if the chair was originally ordered with wheel locksbefore 10/29/07)

NOTE:





Suspension Arm and Hardware Kits Suspension Arm Kits are ordered in "addition" to Motor Kit part numbers 1153335, 1153335E, 1153336 or

1153336E for chairs manufactured before 1/1/06Side Part Number



A - Suspension Arm Kits will include the suspension arm, instruction sheet and mounting hardware for the motor, wheel, brake leverand fender. The new suspension arm will have the holes necessary to accept the brake lever stop plate

NOTE:


GB Connector Covers


GB Connector CoversItem


Package Assembly1141670 GB Connector Cover w/o Wheel Lock Assembly -

Right1 11 A

Bracket, Cover, Connector, Black - Right 1 12Bracket, Cover, Connector, Top, Black - Right 1 13Screw, Phillips Pan Head w/ Patch (#10-32 x 3/8") 1 44Washer, Plain (3/16 x 1/2 x 1/16") 1 25Sheet, Instruction 1 1

1141671 GB Connector Cover w/o Wheel Lock Assembly -Left

1 11 ABracket, Cover, Connector, Black - Left 1 12Bracket, Cover, Connector, Top, Black - Left 1 13Screw, Phillips Pan Head w/ Patch (#10-32 x 3/8") 1 44Washer, Plain (3/16 x 1/2 x 1/16") 1 25Sheet, Instruction 1 1

1141672 GB Connector Cover w/ Wheel Lock Assembly -Right

1 16 BBracket, Cover, Connector, Black - Right 1 12Screw, Phillips Pan Head w/ Patch (#10-32 x 3/8") 1 24Washer, Plain (3/16 x 1/2 x 1/16") 1 25Sheet, Instruction 1 1

1141673 GB Connector Cover w/ Wheel Lock Assembly -Left

1 16 BBracket, Cover, Connector, Black - Left 1 12Screw, Phillips Pan Head w/ Patch (#10-32 x 3/8") 1 24Washer, Plain (3/16 x 1/2 x 1/16") 1 25Sheet, Instruction 1 1

A - Includes items 2-5 and instruction sheet. B - Includes items 2, 4, 5 and instruction sheet.

NOTE:


Side(All Models)

Chair SN07HXXXXXXand Before

WARR RPLMT PartNumber

Chair SN 07IXXXXXXand After

WARR RPLMT PartNumber

1153336E07IXXXXXX1123234E-NLA 07HXXXXXXLeft WARR RPLMT See Note(s) B

1153649E 07IXXXXXX1123234E-NLA

07HXXXXXXLeft WARR RPLMTw/ Wheel Lock See Note(s) B, A See Note(s) A

1153335E07IXXXXXX1123235E07HXXXXXXRight WARR RPLMT1153648E

07IXXXXXX1123235E 07HXXXXXXRight WARR RPLMT

w/ Wheel Lock See Note(s) A See Note(s) AA - Used for chairs originally ordered with wheel Locks before 10/29/07 B - Part #1123234E is no longer available. See part #1153336E or (1153649E if the chair was originally ordered with wheel locksbefore 10/29/07)

NOTE:

GB Motors Warranty Replacement Reference Chart


8" and 9" Caster Assemblies


8" and 9" Caster AssembliesItem


Package Assembly1104409 Fork Assembly, Standard (8" Caster) 1 11 H1134471 Fork Assembly, Standard (8" Caster)

TRRO/TRBKTS1 11 H

1104410 Fork Assembly, Standard (9" Caster) 1 11 H1106423 Fork Assembly, Shock (8" Caster) 1 111104419 Hardware, 8" Caster Standard/ Shock Fork (Per

Side)1 12 A

1039757 Hardware, Caster, Standard Fork (9") (Per Side) 1 12 A1070400 Screw, Hex Head (7/16-20 x 4") 1 137930329 Washer, Steel (15/32 x 5/8 x 3/64") 25 241101756 Spacer (7/16 x 5/8 x 5/8") 1 257930331 Locknut (7/16-20") 25 161101108 Wheel Assembly, Semi-Pneumatic (8" x 2-1/4") 1 171002002 Wheel Assembly w/ Bearings, Pneumatic (8" x 2") 1 171101157 Wheel Assembly, Pneumatic (9" x 2-3/4") 1 17 B1101158 Wheel Assembly, Pneumatic w/ Flat Free (9" x

2-3/4")1 17 C

40176X034 Tire, Pneumatic (8" x 2") 1 181101155 Tire, Pneumatic, Grey (9" x 2-3/4") 1 181101106 Tire, Semi-Pneumatic, Grey (8" x 2-1/4") 1 181101156 Tire w/ Foam Filled Insert, Grey (9" x 2-3/4") 1 18 G1034942 Tube, Pneumatic Inner (8 x 2") 1 191027417 Tube, Pneumatic Inner (9 x 2-3/4") 1 191006049 Bearing (7/16") 1 2101020592 Spacer, Bearing (7/16 x 5/8 x 1-3/4") 1 1111104451 Hardware, Caster Fork Mounting 1 112 D1106227 Hardware, Caster/ Shock Fork Mounting 1 112 E1028550 Locknut (5/8-18) 1 1131041444 Washer, Nylon (5/8 x 1-5/16 x 1/8") 1 1141101737 Cap, End, Tube, Black 1 1151106068 Spacer, Stem (5/8 x 1-1/8 x 3/16") 1 1161104853 Stem, Shock Fork, Black (6" and 8") 1 1171104851 Fork, Shock (6" and 8") 1 1181104879 Spring, Polyurethane, Yellow 1 2191104855 Hardware, Shock Fork (6" and 8") 1 1201025705 Screw, Hex Head (5/16-24 x 3-1/4") 1 1211016652 Washer (5/16 x 9/16 x 1/32") 1 2221026032 Washer, Nylon (11/32 x 11/16 x 1/16") 1 1231026906 Locknut (5/16-24) 1 1241093978 Flange (5/16" I.D.) 1 2251106223 Screw, Socket Head (3/8-16 x 2-1/2") 1 1261106225 Washer, Nylon (5/16 x 11/16 x 1/8") 1 2271069548 Washer, Steel (7/16 x 13/16 x 1/8") 1 2281024426 Nut, Hex (5/16-24) 1 429


8" and 9" Caster AssembliesItem


Package Assembly1024442 Washer, Lock (5/16 x 9/16 x 1/16") 1 4301013460 Kit, Rim, Outer/Inner Half w/ Hardware (10") 1 131 F1025399 Kit, Rim, Outer/Inner Half w/ Hardware (9") 1 131 F1013466 Hub with Bearings Assembly 1 1321015610 Bearing with Grip Ring (5/8") 1 2337930330 Locknut (5/16-24) 25 1341027730 Screw, Hex Head (5/16-24 x 5") 1 135

1028832-NLA Spacer (5/8 x 7/8 x 1/2") 1 2361028833 Reducer, Axle 1 137

A - Includes items 3-6 B - Includes items 8-9 and 29-33 C - Includes items 8, 31, and 32 D - Includes items 13-15 E - Includes items 13-16 F - Includes items 29 and 30 G - Insert molded to tire H - 400 Lb. weight limit and under

NOTE:


6" Caster AssemblyNOTE: 6" caster assemblies available On-Chair as of 11/19/01


6" Caster AssemblyNOTE: 6" caster assemblies available On-Chair as of 11/19/01



1101737 Cap, End, Tube, Black 1 111028550 Locknut (5/8-18) 1 121041444 Washer, Nylon (5/8 x 1-5/16 x 1/8") 1 131104451 Hardware, Caster Fork Mounting 1 14 A

8881041458 Fork and Stem Assembly (6" Caster) 1 15 C,D8881056379 Fork, Shock, Color (6") 1 15 C,D

7930331 Locknut (7/16-20") 25 167930329 Washer, Steel (15/32 x 5/8 x 3/64") 25 271025726 Screw, Hex Head (7/16-20 x 3-1/4") 1 181042489 Hardware, Caster Axle (Pair) 2 19 B1058890 Hardware, Caster, Shock Fork (Pair) 2 19 B

1072014-NLA Wheel Assembly, Semi Pneumatic (6" x 2") 1 110 E1115179 Wheel Assembly, Urethane Deep Profile (6" x 2") 1 110 F1122066 Wheel Assembly, Urethane Deep Profile (6" x 2")

(Pair)2 110 F,G

1006049 Bearing (7/16") 1 2111020592 Spacer, Bearing (7/16 x 5/8 x 1-3/4") 1 112

A - Includes items 1-3 B - Includes items 6-8 C - Specify frame color when ordering. See page titled "Frame Finishes and Touch-Up Paints". D - 300 Lb. weight limit and under E - Service part No Longer Available 8/15/03. Due to product improvement, order (pair) part number 1122066 dated after

8/14/03 so each side matches. The deep profile caster has 2 tread grooves w/ round corners instead of 4 tread grooves w/ square corners.

F - Service part after 8/14/03. G - Part number 1122066 is a pair number that can be used to replace part number 1072014 that was discontinued 8/15/03

NOTE:


Drive Wheels for Non-Free Wheel Hubs(4-Pole & GB Non-Heavy Duty Motors)

NOTE: New drive wheel mounting hardware is required when converting from (14" x 3") to (14" x 4") drivewheels.


Drive Wheels for Non-Free Wheel Hubs(4-Pole & GB Non-Heavy Duty Motors)

NOTE: New drive wheel mounting hardware is required when converting from (14" x 3") to (14" x 4") drivewheels.

Item #'s 1, 2 and 3 Wheel Components

WheelSize

Item #1Wheel

CompletePneumatic

Item #1Wheel

Completew/ Flat Free

Item #2Tire

Item #2Tire

w/ Flat FreeItem #3Tube

1039651110175410396521104437110443814" x 3"

For 4-Pole& GB Motors

1042475104247810424741042477104247614" x 4"

For 4-PoleMotors

1042475104247810424741079304107930514" x 4"

For GB Motors See Note(s) A, A1

A - The GB 14" x 4" wheel is used on Non-Heavy Duty GB motors only. The GB 14" x 4" wheel is no longer offered on-chair after1/25/04 (3/14/04 for VA Government orders) and the GB Heavy Duty motors became the only GB motor choice - A1 - ON-Chair after 1/25/04 (3/14/04 for VA Government orders). See page titled "Drive Wheels For TrueTrack GB Heavy DutyTTHD Motors" for chairs manufactured after 1/25/04 (3/14/04 for VA Government orders).

NOTE:



See Chart #'s 1, 2 and 3 Drive Wheels for Non-Free WheelHubs

1 11-31104882 Kit, 8" Rim with Hardware (14 x 3" Wheel) 1 14 F1042453 Rim, 6" w/ Hardware (14 x 4" Wheel) 1 14 E1078246 Rim, 6" w/ Hardware (14 x 4" Wheel) 1 14 B1101094 Screw, Socket Head w/ Patch (5/16-18 x 7/8") 1 5C,D1024443 Screw, Hex Head (5/16-24 x 5/8") 1 6A,C1024442 Washer, Lock (5/16 x 9/16 x 1/16") 1 6A,C1024426 Nut, Hex (5/16-24) 1 6A,C

A - included in rim hardware part number 1042453 and (rim hardware part number 1078246 quantity 4 each) B - For GB motors only C - Not Shown D - included in rim hardware part number 1104882 E - For 4-Pole Motors F - For 4-Pole and GB motors

NOTE:


Drive Wheels for Free Wheel Hubs(4-Pole Motors Only)

Item #'s 1, 2 and 3 Wheel Components

WheelSize

Item #1Wheel

CompletePneumatic

Item #1Wheel

Completew/ Flat Free

Item #2Tire

Item #2Tire

w/ Flat FreeItem #3Tube

1039651110175410396521079301107929814" x 3"1042475104247810424741079304107930514" x 4"


Drive Wheels for Free Wheel Hubs(4-Pole Motors Only)



See Chart Item #'s 1, 2 and 3 Drive Wheels for Free WheelHubs

1 11-31104889 Rim, 8" w/ Hardware (14 x 3" Wheel) 1 141078246 Rim, 6" w/ Hardware (14 x 4" Wheel) 1 147930326 Package, Screw, Hex Head (1/4-20 x 3/4") 25 8B,C7930333 Locknut (1/4-20) 25 8B,C1024443 Screw, Hex Head (5/16-24 x 5/8") 1 4A,B1024442 Washer, Lock (5/16 x 9/16 x 1/16") 1 4A,B1024426 Nut, Hex (5/16-24) 1 4A,B

A - Included in rim with hardware part number 1078246 B - Not Shown C - Included in rim with hardware part number 1104889

NOTE:


Drive Wheels for GB TrueTrack Heavy Duty (TTHD) MotorsNOTE: Gearless/Brushless TrueTrack Heavy Duty (TTHD) motors were introduced and offered as an

ON-chair option to Storm Arrow models from 2/6/03 thru 1/25/04 (3/14/04 for VA Government orders). On1/26/04 (3/15/04 for VA Government orders) Gearless/Brushless TrueTrack Heavy Duty (TTHD) motors

became standard on Storm Arrow and optional on Ranger X and Torque SP/SE & Torque 3 models.


Drive Wheels for GB TrueTrack Heavy Duty (TTHD) MotorsNOTE: Gearless/Brushless TrueTrack Heavy Duty (TTHD) motors were introduced and offered as an

ON-chair option to Storm Arrow models from 2/6/03 thru 1/25/04 (3/14/04 for VA Government orders). On1/26/04 (3/15/04 for VA Government orders) Gearless/Brushless TrueTrack Heavy Duty (TTHD) motors

became standard on Storm Arrow and optional on Ranger X and Torque SP/SE & Torque 3 models.Item


Package Assembly1118273 Tire, Pneumatic with Instruction Sheet, Grey (14" x

3")1 11

1118274 Kit, Tire w/ Flat Free and Instruction Sheet, Grey(14" x 3")

1 11 B,B11118275 Kit, Inner Tube w/ Instruction Sheet, Black (14 x 3") 1 121116701 Kit, Rim 8" w/ Instruction Sheet (For 14 x 3" Wheel) 1 13 B,B11113320 Screw, Socket Head (M8 x 1-1/4 x 16MM) 1 54 B,B11153683 Screw, Socket Head (M8 x 1-1/4 x 25MM) 1 3A1114830 Instruction Sheet, Rim and Tire Replacement 1 1A

A - Not Shown B - When ordering a new flat free tire, rim or 16MM wheel mounting screws item #4, it is recommended to order 3 ea. of part

#1153683 25MM screws as well. B1 - The 25MM screws are inserted a 1/4" in every other mounting hole on the motor to compress the flat free and make it

easier to install the 5 shorter 16MM screws.

NOTE:


Non-Free Wheel Hub Mount and Hardware(4-Pole & GB Non-Heavy Duty Motors)

NOTE: New drive wheel mounting hardware must be ordered when converting from (14" x 3") to (14" x 4")drive wheels.


Non-Free Wheel Hub Mount and Hardware(4-Pole & GB Non-Heavy Duty Motors)

NOTE: New drive wheel mounting hardware must be ordered when converting from (14" x 3") to (14" x 4")drive wheels.



1100574 Hub, Wheel, 4-Pole Motor/ Gearbox (14" x 3") 1 111063339 Hub, Wheel (14" x 4") 1 111000180 Key (3/16 x 1-1/4") 1 121024444 Locknut (5/16-24) 1 13 E1036933 Washer (1/2 x 1-9/32 x 1/8") 1 141001979 Locknut (1/2-20) 1 151100580 Nut, Beveled Hex (5/16-24) 1 161100579 Spacer, G/ B Motor 1 171078242 Plate, Adapter with Studs 1 181104844 Hardware, Drive Wheel Mounting 1 19 A,F1064355 Hardware, Wheel Hub and Drive Wheel Mounting 1 19 B,G1104843 Hardware, Drive Wheel Mounting 1 19 C,H1079258 Hardware, Wheel Hub and Drive Wheel Mounting

(4" Tire)1 19 D,I

A - Includes items 1-2 and 4-6 B - Includes items 1-5 C - Includes items 3, 6 and 7 D - Includes items 3 and 8 E - Gearless/Brushless 14" x 4" drive wheels use a quantity of 8 beveled hex nuts. F - For 4-pole motor/gearbox with 14" x 3" wheel G - For 4-pole motor/gearbox with 14" x 4" wheel H - For G/B motor with 14" x 3" wheel I - For G/B motor with 14" x 4" wheel

NOTE:




7930302 Locknut (1/2-20) 25 111078090 Cup, Washer 1 121079002 Spring, Compression (2-3/32 x 2-1/4 x 3/32") 1 131079001 Washer, Flat (1-13/16 x 2-1/8 x 1/16") 1 141077022 Knob, Engagement, Black 1 151024426 Nut, Hex (5/16-24) 1 461077023 Hub Assembly 1 171000180 Key (3/16 x 1-1/4") 1 181077021 Sleeve, Axle 1 191079004 Free Wheel Hub Assembly 1 1101081358 Drive Wheel Assembly, Pneumatic with Hub (14 x

3")1 111

1081359 Drive Wheel Assembly, Flat Free w/ Hub (14 x 3") 1 1111081362 Drive Wheel Assembly, Pneumatic with Hub (14 x

4")1 111

1081363 Drive Wheel Assembly, Flat Free with Hub (14 x 4") 1 111

Free Wheel Hub Mount and Hardware(4-Pole Motors Only)

NOTE: To change a Non-Free Wheel Hub to a Free Wheeling Hub, see Free Wheel Hub Kits page.


Free Wheel Hub Kits(4-Pole Motors Only)

NOTE: Use kit numbers below to change Non-Free Wheel Hubs to Free Wheeling Hubs.NOTE: All free wheel hub kits include items 2-4.

Free Wheel Hub Kit For (14" x 3" Wheel, Pneumatic)

Item Number Part Number Description Quantity1

Free Wheel Hub Kit14" x 3" Wheel,

Pneumatic10796401.

2Free Wheel Hub Assembly10790042.1Instruction Sheet10792953.2Wheel Assembly w/ Hub,

14" x 3" Pneumatic 10813584.

Free Wheel Hub Kit For (14" x 3" Wheel w/ Flat Free)


Free Wheel Hub Kit14" x 3" Wheel

w/ Flat Free10796411.


14" x 3" w/ Flat Free 10813594.


Free Wheel Hub Kits(4-Pole Motors Only)

NOTE: Use kit numbers below to change Non-Free Wheel Hubs to Free Wheeling Hubs.NOTE: All free wheel hub kits include items 2-4.

Free Wheel Hub Kit For (14" x 4" Wheel, Pneumatic)



Pneumatic10796441.


14" x 4" Pneumatic 10813624.

Free Wheel Hub Kit For (14" x 4" Wheel w/ Flat Free)



w/ Flat Free10796451.


14" x 4" w/ Flat Free 10813634.




1054510 Bracket, Wheel Lock Mount, Black - Right 1 111054512 Bracket, Wheel Lock Mount, Black - Left 1 111054508 Link, Inside, Black 1 127930334 Locknut (1/4-28) 25 231031833 Shoe, Wheel Lock 1 147930323 Package, Locknut (1/4-20) 25 257930326 Package, Screw, Hex Head (1/4-20 x 3/4") 25 261026033 Washer, Nylon (1/4 x 1/2 x 1/16") 1 971018733 Link, Stop, Black 1 181028687 Screw, Hex Head (1/4-28 x 3/4") 1 291021408 Handle, Wheel Lock, Black - Right 1 1101021409 Handle, Wheel Lock, Black - Left 1 110

47376X024 Tip, Rubber Wheel Lock Handle, Black 1 1111026105 Spacer, Nylon (1/4 x 7/16 x 1/8") 1 1121054513 Plate, Wheel Lock Base, Black - Right 1 1131054514 Plate, Wheel Lock Base, Black - Left 1 1131026907 Washer (1/4 x 1/2 x 1/16") 1 1141054515 Wheel Lock Assembly, Right 1 1151054516 Wheel Lock Assembly, Left 1 115

Wheel Lock Assembly4-Pole Motors


Wheel Lock AssemblyGearless/Brushless


Wheel Lock AssemblyGearless/Brushless



1079252 Wheel Lock Assembly w/ Mounting Hardware -Right

1 11 A1079253 Wheel Lock Assembly w/ Mounting Hardware - Left 1 11 A1045267 Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 221078199 Nut 1 231079266 Wheel Lock Assembly, GB - Right 1 141079267 Wheel Lock Assembly, GB - Left 1 141136024 Package, Rubber Tip, Wheel Lock Handle, Black 10 15

1136022R Kit, Wheel Lock Assembly with Mounting Hardware- Right

1 16 B,CWheel Lock Assembly, GB HD - Right 1 17Washer, Flat (21/64 x 53/64 x 7/64") 1 28Screw, Hex Head w/ Patch (5/16-18 x 1") 1 29

1136023L Kit, Wheel Lock Assembly with Mounting Hardware- Left

1 16 B,CWheel Lock Assembly, GB HD - Left 1 17Washer, Flat (21/64 x 53/64 x 7/64") 1 28Screw, Hex Head w/ Patch (5/16-18 x 1") 1 29

1136024 Package, Rubber Tip, Wheel Lock Handle, Black 10 110A - Includes items 2-4 and 1 ea.of item 5 Wheel Lock Rubber Tip B - Includes items 7-9 and 1 ea.of item 10 Wheel Lock Rubber Tip C - Wheel Lock was revised and mounting screw was lengthened 10/29/07 to accommodate the new Stop Plate added for the

GB HD Motor braking mechanism. The Wheel Lock Assembly Kit can retrofit to all GB HD Motor equipped models in the field

NOTE:




1104860 Fender Assembly w/ Instruction Sheet, 4-Pole MotorSuspension Arm

2 11 A1104861 Fender Assembly w/ Instruction Sheet, G/ B Motor

Suspension Arm2 11 A

1101718 Fender, Black 1 221104411 Bracket, Fender Mounting, Black - Right (4-Pole

Motor)1 13

1104412 Bracket, Fender Mounting, Black - Left (4-PoleMotor)

1 131115914 Bracket, Fender Mounting, Black - Right (GB Motor) 1 131115915 Bracket, Fender Mounting, Black - Left (GB Motor) 1 131105556 Spacer, Fender 1 241022597 Screw, Phillips Pan Head Tap (#10-32 x 3/8") 1 451104806 Hardware, Fender Mounting for 4-Pole Motor

Suspension Arm2 16 B

1104807 Hardware, Fender Mounting for G/B MotorSuspension Arm

2 16 B1104908 Instruction Sheet, Fender Assembly 1 1C

A - Includes items 2-5 B - Includes items 3-5 C - Not Shown

NOTE:

Fender Assembly


MKIV Electronics


MK6i Electronics


Battery Chargers & MKIV Harnesses





1053161 Charger, Battery, 8 Amp, 115vac, Off BoardDual Mode Round Plug, Lester

1 11 A1085678-NLA Charger, Battery, 8 Amp. 115vac, Off Board,

Dual Mode, Round Plug w/ AC Power Line Cord,Dynamic

1 11

1123249 Charger, Battery, 8 Amp. 115vac (Off Board) Single Mode Round Plug w/ AC Power Line Cord,CTE Corp.

1 11 O,O1

1123249E WARR RPLMT - Charger, Battery, 8 Amp. 115vac(Off Board) Single Mode Round Plug w/ AC Power Line Cord,CTE Corp.

1 11 O,O1

1089627 Cord, AC Power Line, 115VAC, 2 Prong Off-Board(11' 6" L)

1 121104803 Plug Button, Black (1") 1 13

P0870X000 Nut, Hex Keps (#4-40) 1 247930318 Package, Screw, Phillips Pan Head (#4-40 x 1/2") 25 251104864 Hardware, Charger Port Mounting 1 16 D1061922 Screw, Hex Head w/ Patch (5/16-18 x 1/2") 1 171070430 Bracket, Charger Connector, Black 1 181069724 T-Nut (5/16-18) 1 191104865 Hardware, Charger Port Mounting 1 110 E1083929 Cable, Charger Extension, Round Plug (24" L) 1 1111092912 Programmer Extension Cable Assembly (18" Long) 1 112 B1092314 Harness, Wiring, Black Battery Connector, Round

Plug, GP24 Dual Battery Box1 113 G,K

1124821 Harness, Wiring w/ Red Battery Connector, RoundPlug, GP24 Dual Battery Boxes

1 113 L,M1092306 Harness, Wiring, Round Plug, 22NF Single Battery

Box1 114 G

1095265 Harness, Wiring, Round Plug, GP24 Dual BatteryBox

1 115 H,N1095266 Harness, Wiring, Round Plug, 22NF Single Battery

Box1 116 H

1090117 Fuse - Buss Mini ATM-15 (15 AMP) 1 1171092913 Cable, Drive Lockout Sensor 1 118 C1098892 Fuse - Buss ATC-15 (15 AMP) 1 119 I1090117 Fuse - Buss Mini ATM-15 (15 AMP) 1 219 J1101099 Fuse, Buss ATC-20 (20 AMP) 1 120 I1119230 Fuse - Buss Mini ATM-20 (20 AMP) 1 120 J1109509 Harness, Battery (GP24) 1 1211107296 Harness, Battery (22NF) 1 1221098905 Cable Assembly, 24 Volt, Anderson/P.T.O. 1 1231095502 Package, Cable Tie (11-1/2" L) 1 1F1108970 Package, Tie Wrap (3-7/8" L) 1 1F





1090357 Wrap, Slit Wire Harness (1/2" O.D., 36" Long Cut ToLength)

1 1FA - On 7/18/01 the Lester 8 amp. battery charger was introduced to 3G Storm Series chairs. B - Used only when a 2GTR powered seating systems are ordered. C - For manual recliners and high back captain seats. D - Includes items 3-5 E - Includes items 4, 5, 7-9 F - Not Shown G - For A.S.B.A. non-recliner, all powered seating systems and high back semi recline captain seats H - For A.S.B.A. manual recliner and high back full recline captain seats I - Before 4/1/03 J - After 3/31/03 K - For all 4-pole motors and all GB non-heavy duty and (GB heavy duty TTHD motors before 1/26/04) L - For GB Heavy Duty TTHD motors after 1/25/04 only. GB Non-Heavy Duty motors no longer offered after 1/25/04. M - For A.S.B.A. manual recliner and high back full recline captain seats, item 18 sensor cable must be ordered as well. N - For models equipped with GB heavy duty motors after 1/25/04, order item 13 wire harness part number 1124821 and item

18 sensor cable part number 1092913. O - CTE charger introduced and standard on-chair 4/1/04. Used on Gel Cell or AGM (Absorbed Glass Mat) batteries. For wet

cell batteries refer to the Lester charger. O1 - CTE charger looks exactly the same as Dynamic's charger except for the company name that is silk screened on the

narrow side panel, where the charger plug is (hard wired) attached. Serial number starts with 04A00000001.

NOTE:


Battery Chargers, MK6i Battery Cables & Sensor Cables


Battery Chargers, MK6i Battery Cables & Sensor Cables



1053161 Charger, Battery, 8 Amp, 115vac, Off BoardDual Mode Round Plug, Lester

1 111123249 Charger, Battery, 8 Amp. 115vac (Off Board)

Single Mode Round Plug w/ AC Power Line Cord,CTE Corp.

1 11

1123249E WARR RPLMT - Charger, Battery, 8 Amp. 115vac(Off Board) Single Mode Round Plug w/ AC Power Line Cord,CTE Corp.

1 11

1089627 Cord, AC Power Line, 115VAC, 2 Prong Off-Board(11' 6" L)

1 121136055 Cable and Bracket w/ Black Connector (GP24

Batteries & 4-Pole Motors)1 13 A

1147019 Cable and Bracket w/ Red Connector (GP24Batteries & GB TT Motors)

1 13 B1140112 Cable, Battery Extension 1 14 C1146573 Cable, Drive Lockout Sensor, MK6i 1 15 D1144926 Cable, Drive Lockout Sensor, MK6i 1 16 E1142231 Cable, GB TT Interface 1 17 F

A - Used for GP24 Batteries only with 4-Pole Motors B - Used for GP24 Batteries only with GB TT Motors C - Used for 22NF Batteries with 4-Pole Motors only D - Used for chairs manufactured with ADJRECL Manual Recline or Full Recline Van Seats with 4-Pole Motors only. E - Sensor Cable used with item 7 Interface Cable for chairs manufactured with ADJRECL Manual Recline Seat Frame or Full

Reline Van Seats with MK6i Electronics and GB TT Motors F - Interface Cable used with item 6 Sensor Cable for chairs manufactured with ADJRECL Manual Recline Seat Frame or Full

Reline Van Seats with MK6i Electronics and GB TT Motors

NOTE:


Battery Boxes & Support FrameGroup 24 Batteries

NOTE: [Before 10/9/06: Group 24 battery boxes were standard on Arrow, Ranger X (U300) and Torque SP(301-350TQHD) models. Group 24 battery boxes are optional on Torque SP (250TQ) and (251-300TQ)

models.] [NOTE: After 10/8/06: Group 24 battery boxes are standard on Arrow and Ranger X and optional on

Torque SP & (Torque SE introduced 11/15/06) & (Torque 3 introduced 12/19/07)]








1039705 Battery Box Assembly w/ Black Battery Connector,Front

1 11 A1123974 Battery Box Assembly w/ Red Battery Connector,

Front1 11 J,K

1146296 Battery Box Assembly w/ Black Battery Connector,Front, For Formula CG Elevate System Only

1 11 N1151803 Battery Box Assembly w/ Red Battery Connector,

Front, For Formula CG Elevate System Only1 11 K,P

1041440 Battery Box Assembly w/ Black Battery Connector,Rear

1 11 A1123975 Battery Box Assembly w/ Red Battery Connector,

Rear1 11 J,K

1041439 Battery Box Bottom Assembly, Front 1 12 B1146293 Battery Box Bottom Assembly, Front, For Formula

CG Elevate System Only1 12 B

1041438 Battery Box Bottom Assembly, Rear 1 12 C1041432 Battery Box Lid Assembly w/ Black Battery

Connector, Front1 13 I

1123962 Battery Box Lid Assembly w/ Red BatteryConnector, Front

1 13 J,K1146294 Battery Box Lid Assembly w/ Black Battery

Connector, Front, For Formula CG Elevate SystemOnly

1 13 N

1151801 Battery Box Lid Assembly w/ Red BatteryConnector, Front, For Formula CG Elevate SystemOnly

1 13 K,P

1085414 Battery Box Lid Assembly w/ Black BatteryConnector, Rear

1 23 I1123963 Battery Box Lid Assembly w/ Red Battery

Connector, Rear1 13 J,K

1039773 Screw, Phillips Pan Head (#6-32 x 1-1/8") 1 241043599 Washer, Flat (5/32 x 3/8 x 1/32") 1 25

P0870X050 Nut, Keps (#6-32) 1 261041421 Pin, Connector Guide 1 471041422 Ring, Retaining 1 181041420 Bracket, Connector Guide Mounting 1 291041433 Pin, Handle 1 1101041434 Handle, Strap, Rear Battery Box, Black 1 2111041420 Bracket, Connector Guide Mounting 1 2121043599 Washer, Flat (5/32 x 3/8 x 1/32") 1 4131039773 Screw, Phillips Pan Head (#6-32 x 1-1/8") 1 414








P0870X050 Nut, Keps (#6-32) 1 4151070504 Fastener, Hook with Adhesive Back (1" W x 1" L) 1 2161041421 Pin, Connector Guide 1 2171041422 Ring, Retaining 1 4181041420 Bracket, Connector Guide Mounting 1 2191041435 Handle, Strap, Front Battery Box, Black 1 2201049550 Clip, Retainer 1 2211039649 Spacer (3/8 x 5/8 x 25/32") 1 2221104881 Spacer (3/8 x 5/8 x 3/4") 1 1221049549 Retainer, Battery Box 1 1231086974 Frame, Battery Box Support, Black 1 1241144774 Frame, Battery Box Support, Black (Formula CG

Elevate Only)1 124

1104859 Battery Box Assemblies, Support Frame andHardware, with Vent Present

1 125 G1124559 Battery Box Assemblies, Support Frame and

Hardware, with Vent Present1 125 L

1104821 Battery Box Assemblies, Support Frame andHardware,without Vent Present

1 125 H

1123976 Battery Box Assemblies, Support Frame andHardware,without Vent Present

1 125 M

1104802 Decal, Push/Drive 1 226 O1104693 Cam - Right 1 1271104694 Cam - Left 1 1271095489 Decal, Invacare 3-D Logo (2-1/2" L) 1 1281104692 Cover, Battery Retainer 1 1291105557 Bracket, Battery Support, Black 1 1301104696 Bushing, Top 1 2311075176 Screw, Slotted Hex Washer Head Tap (#10-16 x

1-1/2")1 232

1028755 Screw, Phillips Pan Head (#10-32 x 5/8") 1 2331023631 Washer, Plain (3/16 x 1/2 x 1/16") 1 2341104871 Hardware, Retainer 1 135 D1104701 Retainer Assembly 1 136 E1089385 Fuse, MIDI (Non-G/B & G/B) (80 AMP) 1 2F,K1104849 Service Manual, Storm 1 1F






A - Includes items 2 and 3. Used with all 4-pole motors, GB non-heavy duty and [GB heavy duty TTHD motors before 1/26/04 (3/15/04 for VA Government orders)]

B - Includes items 10 and 20 C - Includes items 10 and 11 D - Includes items 31-34 E - Includes items 27-34 F - Not Shown G - Includes items 1 and 21-24 and used before 1/26/04 H - Includes items 1, 22 and 24 and used before 1/26/04 I - Used with all 4-pole motors, GB non-heavy duty and [GB heavy duty TTHD motors before 1/26/04 (3/15/04 for VA

Government orders)] J - Used with GB heavy duty TTHD motors after 1/25/04 only (3/14/04 for VA Government orders) K - Battery box lids made after 1/25/04 (3/14/04 for VA Government orders) use a non-replaceable 125 Amp. fuse. A new

battery box lid must be ordered when the 125 Amp. fuse is required. L - Includes items 1 and 21-24 and used after 1/25/04 (3/14/04 for VA Government orders). The battery box lids contain the

125 Amp. non-replaceable fuse M - Includes items 1, 22 and 24 and used after 1/25/04 (3/14/04 for VA Government orders). The battery box lids contain the

125 Amp. non-replaceable fuse N - Used with 4-Pole motors only with Formula CG Elevate System O - Decal not used when GB Heavy Duty Motors are used P - Used with GB Heavy Duty TTHD motors with Formula CG Elevate System

NOTE: Items 25, 36, service manual part number 1104849 and new wire harness for Group 24 batteries must be ordered when upgrading from 22NF batteries to Group 24 Batteries.

NOTE:


Battery Box and Tray Assembly22NF Batteries

NOTE: [Before 10/9/06: 22NF battery boxes were standard on Torque SP (250TQ) and (251-300TQ)models.]

NOTE: [After 10/8/06: 22NF battery boxes are standard on Torque SP (300 Lb. Limit) models.]. [Standardon Torque SE introduced 11/15/06 & Torque 3 introduced 12/19/07]


Battery Box and Tray Assembly22NF Batteries

NOTE: [Before 10/9/06: 22NF battery boxes were standard on Torque SP (250TQ) and (251-300TQ)models.]

NOTE: [After 10/8/06: 22NF battery boxes are standard on Torque SP (300 Lb. Limit) models.]. [Standardon Torque SE introduced 11/15/06 & Torque 3 introduced 12/19/07]



1050175 Battery Box Assembly 1 11 A1049365 Battery Box Bottom with Straps 1 121049366 Battery Box Lid Assembly 1 13 B1070504 Fastener, Hook with Adhesive Back (1" W x 1" L) 1 241037901 Screw, Phillips Pan Head (#6-32 x 7/8") 1 25

P0870X050 Nut, Keps (#6-32) 1 2650000X121 Strap, Battery Lift 1 2750000X123 Cable, Battery Jumper 1 18

1025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 291028769 Locknut (5/16-18) 1 2101049846 Strap Assembly, Battery 1 1111092190 Battery Tray with Strap Assembly 1 1121049354 Bracket, Hanger, Black 1 2131104881 Spacer (3/8 x 5/8 x 3/4") 1 2141104837 Battery Box/ Tray Assembly 1 115 C1095489 Decal, Invacare 3-D Logo (2-1/2" L) 1 1161089385 Fuse, MIDI (Non-G/B & G/B) (80 AMP) 1 1D

A - Includes items 2 and 3 B - Includes items 4-6 C - Includes items 1, 8-10 and 12-14 D - Not Shown

NOTE:


Battery Tray, Proximity Sensor and HardwareFor Elevating Seat



Battery Tray, Proximity Sensor and HardwareFor Elevating Seat




1025704 Washer, Flat (5/16 x 5/8 x 1/16") 1 211028769 Locknut (5/16-18) 1 421106529 Bracket, Battery Tray Support, Black 1 231049354 Bracket, Hanger, Black 1 241104881 Spacer (3/8 x 5/8 x 3/4") 1 251106662 Label, Warning, Elevating Seat 1 161106517 Tray, Battery 1 171108774 Hardware, Proximity Switch Sensor and Mounting 1 18 A1005889 Locknut (#4-40) 1 291008525 Washer, Internal Tooth Lock (#4-40) 1 2101011011 Washer, Plain (1/8 x 5/16 x 1/32) 1 2111021742 Screw, Phillips Pan Head (#4-40 x 1/2") 1 2121105715 Sensor, Proximity Switch 1 1131042484 Screw, Hex Head (5/16-18 x 2") 1 2141109563 Strip, Grommet 1 1151026158 Locknut (5/16-18) 1 2161074133 Washer, Steel (5/16 x 3/4 x 1/16") 1 2171049846 Strap Assembly, Battery 1 1181108773 Hardware, Actuator Switch Sensor and Mounting 1 119 D1024001 Sensor, Actuator Switch 1 1201005889 Locknut (#4-40) 1 2211008525 Washer, Internal Tooth Lock (#4-40) 1 2221106518 Bracket, Actuator Switch Sensor, Black 1 1231011011 Washer, Plain (1/8 x 5/16 x 1/32) 1 4241027704 Screw, Phillips Pan Head (#4-40 x 3/8") 1 4251108775 Hardware, Battery Tray Mounting 1 1B,C

A - Includes items 9-13 B - Includes items 1-5 C - Not Shown D - Includes items 20-25

NOTE:


Elevating Actuator, Switch Sensor and HardwareFor Elevating Seat



Elevating Actuator, Switch Sensor and HardwareFor Elevating Seat




1025736 Locknut (1/4-20) 1 611108436 Bracket, Actuator Support, Black 1 121109334 Actuator Motor Assembly, Elevate 1 131108435 Bracket, Battery Strap, Black 1 141025708 Bolt, Hex Head Cap (1/4-20 x 3/4") 1 851005889 Locknut (#4-40) 1 261008525 Washer, Internal Tooth Lock (#4-40) 1 271011011 Washer, Plain (1/8 x 5/16 x 1/32) 1 481106518 Bracket, Actuator Switch Sensor, Black 1 191027704 Screw, Phillips Pan Head (#4-40 x 3/8") 1 4101024001 Sensor, Actuator Switch 1 111 B1108773 Hardware, Actuator Switch Sensor and Mounting 1 112 A1088898 Screw, Hex Head w/ Patch (1/4-20 x 1-3/4") 1 413

A - Includes items 6-11 B - The Proximity Sensor that mates up with item 11 can be found under the page titled "Battery Tray, Proximity Sensor and

Hardware For Power Elevating Seat". NOTE:




1080865 Pin, Oxygen Holder 1 21 A1035614 Plug Button, Black (5/8") 1 121080866 Decal, Oxygen Warning - English 1 131027684 Knob, Clamping, Black 1 241086780 Package, Protective Cap 10 251073159 Pad, Non-Skid 1 161080872 Strap and Buckle Assembly 1 171083052 Carton, Shipper 1 182000454 Bag, Poly (39" L x 33" W) 1 191080869 Instruction Sheet, Oxygen Holder 1 110

1080870-NLA Oxygen Holder Assembly with Instruction Sheet 1 111 B,CA - Oxygen holder pins are to be used when backrest is absent. B - Includes items 1-10 C - Due to product improvement, see oxygen holder assemblies dated after 4/14/03 that will accommodate both (exposed and

non-exposed) captain seat hinge assemblies. Special orders are no longer needed for exposed hinge assembly models.

NOTE:

Oxygen Holder Assembly Kit Before 4/15/03Captain Seat, Low Back Models Only


Oxygen Holder Assembly Kit After 4/14/03All Captain Seat Models


Oxygen Holder Assembly Kit After 4/14/03All Captain Seat Models



1116952 Oxygen Holder Assembly Kit 1 11 A1116956 Oxygen Holder Assembly(D or E Tanks) 1 11 B

HFO2-ML6 Oxygen Holder Assembly (Home Filled Tank) 1 111055304 Screw, Socket Button Head (1/4-28 x 5/8") 1 321025765 Locknut (1/4-28) 1 331028486 Locknut, Low Profile (3/8-16) 1 241118889 Washer, Steel (3/8 x 7/8 x 1/16") 1 651116954 Nut, Hex (3/8-16) 1 261118888 Screw, Hex Head (3/8-16 x 1-1/4") 1 271116953 Bracket, Oxygen Holder, Black 1 181080866 Decal, Oxygen Warning - English 1 191116950 Pad, Non-Skid 1 1101116945 Spring, Oxygen Holder 1 1111072319 Screw, Socket Button Head (#10-32 x 1/2") 1 1121025735 Locknut (#10-32) 1 1131116957 Instruction Sheet, Oxygen Holder 1 1141021866 Bag, Poly (26" L x 15" W) 1 1151063960 Carton 1 116

A - For seats with an INTERNAL (Non-Visible) hinge assembly. Includes O2 Holder and items 2-16 B - For seats with an EXTERNAL (Visible) hinge assembly. Includes O2 Holder and includes items 9-16

NOTE:




1098857 Oxygen Holder Assembly Kit 1 11 A1098333 Instruction Sheet, Oxygen Holder 1 121021148 Bag, Poly Zip-Lip (8-3/4" L x 6" W) 1 131021866 Bag, Poly (26" L x 15" W) 1 141097276 Carton, Shipper 1 151096839 Screw, Hex Head (1/4-20 x 2-1/4") 1 161096838 Screw, Hex Head (1/4-20 x 2") 1 171018739 Washer (1/4 x 5/8 x 3/32") 1 287930333 Locknut (1/4-20) 25 291026900 Washer (1/4 x 23/32 x 1/16") 1 2101027684 Knob, Clamping, Black 1 4111080866 Decal, Oxygen Warning - English 1 1121072002 Pad, Non Skid 1 113


Oxygen Holder Assembly KitASBA Seats (Before 7/5/05)

NOTE: Oxygen holder is not available on recliner options and seat depths of 15" or less because of theCJ bracket interference.


Oxygen Holder Assembly KitADJASBA Seats (After 7/4/05)

NOTE: Oxygen holder is not available on recliner options and the 12"-16" wide ADJASBA Seat Frame


Oxygen Holder Assembly KitADJASBA Seats (After 7/4/05)

NOTE: Oxygen holder is not available on recliner options and the 12"-16" wide ADJASBA Seat FrameItem


Package Assembly1135504 Kit, Oxygen Holder Assembly For ADJASBA Seats 1 11 A

Holder, Oxygen 1 12Bracket, Oxygen Holder (ASBA and ADJASBASeats)

1 13Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 44Washer (1/4 x 1/2 x 1/16") 1 45Locknut (1/4-20) 1 46Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") 1 27Washer, Flat (21/64 x 53/64 x 7/64") 1 28Locknut (5/16-18) 1 29Instruction Sheet, Oxygen Holder For ADJASBASeats

1 110Bag, Poly Zip-Lip (8-3/4" L x 6" W) 1 111Bag, Poly (26" L x 15" W) 1 112Carton, Shipper 1 113



Power Wheelchair Tool Kit


Power Wheelchair Tool KitItem


Package Assembly1125222 Kit, Power Wheelchair Tool

Includes:1 ea. Multimeter with Leads1 ea. Locator, Protractor/Angle Magnetic Base1 ea. Instructions, MKIV Programmer1 ea. Wire, Grounding with Hand Strap and Clip1 ea. Leads, 1" Test1 ea. Light, Pen with Invacare Logo1 ea. Tape Measure, Compact with Invacare Logo1 ea. Screwdriver, Pen-Size Phillips/Flat Head1 ea. Cable, Virtual Service Charger/Modem

1 11


Miscellaneous AccessoriesNOTE: Chest Positioning Straps share the same hardware that attaches a Back Upholstery





See Chart #1 Positioning Straps 1 11See Chart #1 Pelvic Restraint Belt For TRRO Option Only 1 11 C1037610 Screw, Hex Head (1/4-20 x 1-5/8") 1 221025736 Locknut (1/4-20) 1 231124385 Kit, Seat Positioning Strap Mounting Hardware (both

LT & RT sides)1 14 A

Screw, Hex Head w/ Patch (1/4-20 x 3/4") 1 25Washer (1/4 x 1/2 x 1/16") 1 26Locknut (1/4-20) 1 27

1134055 Screw, Hex Head (3/8-24 x 5/8") 1 281134054 Bushing, Nylon (1/2 x 9/16 x 9/32") 1 291134056 Nut, Barrel (3/8-24) 1 210

40176X010 Pump, Tire 1 1BA - Includes items 5-7 B - Not Shown C - Before ordering a replacement Pelvic Restraint Belt for TRRO Option, Please read the information provided on page titled

"TRRO and TRBKTS Option Clarification Reference" page

NOTE:



#1 Positioning StrapsDescription 12"-15" Wide 16"-19" Wide 20"-22" Wide 23"-24" Wide

1034622Strap, Positioning,Seat/Chest w/ AutoStyle Push ButtonBuckle (Eyelet to

Eyelet Length 69")


Eyelet Length 61")


Eyelet Length 48")

1036527Strap, Positioning,Seat/Chest w/ Auto

Style Buckle (Eyelet toEyelet Length 33")

Auto StylePush Button

See Note(s) A1034753

Strap, Positioning,Seat/Chest w/Airline

Style Buckle(Eyelet to Eyelet

Length 70")

1034752Strap, Positioning,

Seat/Chest w/ AirlineStyle Buckle (Eyelet to

Eyelet Length 61")


Seat/Chest w/ AirlineStyle Buckle (Eyelet to

Eyelet Length 46")N/AAirline Style


Hook and Loop StyleBuckle

(Eyelet to EyeletLength 69")


Seat/Chest w/ Hookand Loop Style Buckle



Seat/Chest w/ Hookand Loop Style Buckle


N/AHook and Loop

See Note(s) B See Note(s) B See Note(s) B See Note(s) BA - 12"-15" wide positioning straps come in rainbow color. B - Hook and Loop style positioning strap for power chairs is used for chest positioning only

NOTE:

#1 Pelvic Restraint Belt For TRRO Option OnlyDescription 12"-16" Wide 16"-24" Wide

1134476Belt, Pelvic Restraint w/ Auto Style

Push Button Buckle (Bushing Hole toBushing Hole Length 55")

1134475Belt, Pelvic Restraint w/ Auto Style

Push Button Buckle (Bushing Hole toBushing Hole Length 37")

Auto StylePush Button

See Note(s) A See Note(s) A

A - Includes the Pelvic Restraint Belt and items 8-10 NOTE:


Yes, you can. ™

Invacare Corporation www.invacare.com

One Invacare WayElyria, Oh USA44036-2125800-333-6900

Technical Support800-832-4707Florida Technical Support407-321-5630

Customer Service800-333-6900

Form No. 00-191

©2009 Invacare Corporation. Elyria, Ohio.All rights reserved. Trademarks areidentified by the symbols ™ and ®. Alltrademarks are owned by or licensed toInvacare Corporation unless otherwisenoted. Otto Bock is a registered trademarkof Otto Bock Orthopaedische IndustrieGMBH & Co., Tash is a registeredtrademark of Tash International Inc.,Therafin is a registered trademark of W/R/Medical Electronics Co., Bussman is aregistered trademark of Cooper Industries.,MIDI is a registered trademark of LittelfuseInc., Dynamic is a registered trademark ofDynamic Controls Limited. (Revised08/20/09)

invacare arrow chair

Documents