inventing - emco chem of contents aliphatic crosslinkers for polyurethanes 4 desmodur® n - hdi...
TRANSCRIPT
INVENTINGINSPIRATIONFOR YOU
CASE Product IndexPolyurethane Coatings, Adhesives and Sealants
Bayhydrol® | Bayhydrol® UV | Bayhydur® | Desmodur®
Desmophen® | Dispercoll® | Desmocap® | Impranil®
Table of ContentsAliphatic Crosslinkers for Polyurethanes 4Desmodur® N - HDI Biuret 4Desmodur® N – HDI Trimer 4Desmodur® N – Low Viscosity HDI 5Bayhydur® – Water Dispersible Crosslinkers 5Desmodur® – Water Dispersible Crosslinkers for Adhesive Applications 6Desmodur® BL – Thermoreactive Crosslinkers for 1K Polyurethane Baking Systems 6Bayhydur® – Thermally Activated Polyurethane Hardener for 1K Waterborne Baking Systems 7Desmodur® Z – IPDI Trimer 7Desmodur® – HDI / IPDI Crosslinkers for Polyurethanes 7Aliphatic Prepolymers 8Low Functionality Crosslinkers for Polyurethanes 8Aromatic Crosslinkers for Polyurethanes 8Modified MDI Crosslinkers for Polyurethanes 9Desmodur® L/IL/HL Crosslinkers for Polyurethanes 9Desmodur® R Crosslinkers for Polyurethanes 9Polymeric MDI Crosslinkers for Polyurethanes 10Prepolymers 10Desmocap® – Epoxy FlexibIlizers 11Desmoseal® – Silane Terminated Prepolymers 11MDI Allophanates 11Amine Functional Coreactants 12Impranil® High Solids Thermally Activated Polyurethane Hardeners for Textile Applications 12Imprafix® Crosslinking Agents and Catalysts 13Impranil® 1K Polyurethane Solutions for Textile Applications 13Bayhydrol® – PUR Dispersions for 1K Coatings 14Bayhydrol® – Oxidatively Curing PES/PUR Dispersions for 1K Systems 15Bayhydrol® – OH Functional Dispersions for Waterborne 2K Systems 16Bayhydrol® UV-Curable PUR Dispersions 17Baybond® – PUR Dispersions for Glass Fiber Sizing 17Impranil® – Aqueous PUR Dispersions for Textile Coatings 18Dispercoll® U PUR Dispersions for Adhesive and Sealant Applications 19Dispercoll® C Polychoroprene Aqueous Dispersions for Adhesive Applications 19Dispercoll® S Nano-Silica Additives for Dispercoll® C 20Pergut® Chlorinated Rubber (Supplied as Fine Powder) 20Hydroxyl-Functional Polyurethanes for Adhesives (Supplied as Granules) 21Desmomelt® Hydroxyl-Functional Polyurethanes for Adhesives 21Polycarbonate Diols 21Polyester Polyols 22Polyester Blends 22Crelan® Crosslinkers for Polyurethane Powder Coatings 22Polyether Polyols 23
Aliphatic Crosslinkers for Polyurethanes
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® H HDI 100 — 49.7 84 3 Aliphatic oligomers, prepolymers and PU dispersions for coatings, adhesives and elastomer applications
Provides flexibility, weather stability
Desmodur® I IPDI 100 — 37.5 111 10 Prepolymers and PU dispersions for coatings, elastomers, adhesives and sealant applications
Provides optical clarity, hardness and weather stability
Desmodur® W H12MDI 100 — 31.8 132 30 Prepolymers and PU dispersions for coatings, elastomers, adhesives and sealant applications
Provides optical clarity, weather stability, superior mechanical properties and resistance to hydrolysis
Desmodur® N - HDI Biuret
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® N 100A HDI 100 — 22.0 191 8000 2K PUR systems for automotive refinish, wood/furniture, industrial, plastics and maintenance coatings
Outstanding weather stability, mechanical properties and gloss retention, non-yellowing, high chemical resistance, good compatibility
Desmodur® N 3200A HDI 100 — 23.0 183 2500 ± 1000
2K PUR systems for automotive refinish, wood/furniture, industrial, plastics and maintenance coatings
High resistance to chemicals, outstanding mechanical properties, especially good for weather-stable and non-yellowing high solids coatings
Desmodur® N 75A BA HDI 75 BA 16.5 255 150 2K PUR systems for automotive refinish, wood/furniture, industrial, plastics and maintenance coatings
Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, good compatibility, HAPs free
Desmodur® N 75A BA/X HDI 75 BA/X (1:1)
16.5 255 150 2K PUR systems for automotive refinish, wood/furniture, industrial, plastics and maintenance coatings
Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, good compatibility
Desmodur® N 75A MPA/X
HDI 75 MPA/X (1:1)
16.5 255 250 2K PUR systems for automotive refinish, wood/furniture, industrial, plastics and maintenance coatings
Outstanding weather stability and gloss retention, non-yellowing, high chemical resistance, good compatibility
Desmodur® N – HDI Trimer
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® N 3300A HDI 100 — 21.8 193 3000 2K PUR systems for automotive OEM, automotive refinish, plastics and industrial coatings
Outstanding weather stability and gloss retention, non-yellowing, high resistance to chemicals and outstanding mechanical properties.
Desmodur® N 3390A BA/SN
HDI 90 BA/SN 100 (1:1)
19.6 214 500 2K PUR systems for automotive OEM, automotive refinish, plastics and industrial coating
Outstanding weather stability and gloss retention, non-yellowing, high resistance to chemicals and outstanding mechanical properties.
Desmodur® N 3500 HDI 100 — 19.5 215 35000 2K PUR systems used as the hardener component for solvent-free in-mold coatings
Lightfast, scratch-resistant
Desmodur N 3580 BA HDI 80 BA 15.4 273 500 Primarily used as topcoats in automotive OEM and plastic coatings
Lightfast, weather and scratch-resistant
Desmodur® N 3790 BA HDI 90 BA 17.8 236 1600 2K PUR systems for industrial coatings, automotive refinish, automotive OEM and plastics
High functionality, fast-drying, weather stable, non-yellowing, high resistance to chemicals and outstanding mechanical properties.
Desmodur® N 3800 HDI 100 — 11.0 382 6000 2K PUR coatings for stone-chip protection systems, vehicle repair systems and plastics
Highly flexible, weather stable, increased formulation latitude as blend partner with other hardeners, high resistance to chemicals and outstanding mechanical properties
Desmodur® XP 2675 HDI 100 — 20 210 13000 2K PUR coating used for air and heat-drying automotive OEM and refinish and transportation coatings, as well as industrial coatings and coatings for plastics
High chemical resistance and weather stability, very good gloss retention and outstanding mechanical properties
4 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Desmodur® N – Low Viscosity HDI
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® N 3400 HDI 100 — 21.8 193 140 Reactive thinner or hardener for high solids and waterborne 2K PUR coatings
Very low viscosity, lightfast, suitable for high gloss systems as well as for matte moisture-cure systems
Desmodur® N 3600 HDI 100 — 23.0 183 1100 2K PUR systems for automotive OEM, automotive refinish, plastics and industrial coatings
Low viscosity, weather stable, non-yellowing; for high solids and waterborne systems
Desmodur® N 3900 HDI 100 — 23.5 179 700 2K PUR systems for automotive refinish, plastics and industrial coatings
Low viscosity, weather stable, non-yellowing; for high solids and waterborne systems; good functionality/viscosity balance
Desmodur® XP 2580 HDI 100 — 20.0 215 450 2K PUR Light-stable elastomers and high solids systems
Low viscosity, weather stable, retains gloss and color
Desmodur® XP 2730 HDI 100 — 22.7 185 90 Reactive thinner or hardener for high solids and waterborne 2K PUR coatings
Ultra low viscosity, lightfast for high solids, high gloss and matte moisture-cure systems
Bayhydur® – Water Dispersible Crosslinkers
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Bayhydur® 302 HDI 100 — 17.3 242 2300 2K waterborne PUR systems for automotive refinish, wood furniture, plastics, industrial coatings and adhesives
Versatile and economical, good chemical resistance, outstanding stability and gloss retention
Bayhydur® 303 HDI 100 — 19.3 218 2400 2K waterborne PUR systems for plastics, industrial coatings and adhesives
Good chemical resistance, weather stable, non-yellowing
Bayhydur® 304 HDI 100 — 18.2 230 4000 Hardener in 2K waterborne PUR systems for automotive refinish, plastics and industrial coatings
High functionality, good chemical resistance, good dispersibility, weather stable, non-yellowing. FDA compliant for 175.105
Bayhydur® 305 HDI 100 — 16.2 260 6500 Hardener in 2K waterborne PUR systems for wood/furniture and industrial coatings
Good dispersibility, weather stable, non-yellowing, increased flexibility
Bayhydur® 401-70 IPDI 70 MPA/X (1:1)
9.4 440 600 2K waterborne PUR systems for automotive refinish and industrial coatings
Weather stable, non-yellowing, improved hardness, good adhesion and drying properties,
Bayhydur® XP 2451/1 HDI 100 — 20.3 207 900 Suitable as the hardener component in the formulation of water-reducible 2K coatings, topcoats and sealers
Can also be added to conventional OH-free dispersions to improve their property profiles
Bayhydur® XP 2487/1 HDI 100 — 20.6 204 5400 Hardener in 2K waterborne PUR systems for plastics and industrial coatings
Outstanding weather stability and gloss retention, along with high chemical resistance and non-yellowing
Bayhydur® XP 2547 HDI 100 — 22.5 187 600 2K waterborne PUR systems for flooring, suitable for maintenance coatings and especially good for concrete flooring
Good gloss and chemical resistance, non-yellowing
Bayhydur® XP 2655 HDI 100 — 20.8 202 3500 Hardener in 2K waterborne PUR systems
Easy mixing, outstanding chemical resistance, fast drying and high ultimate hardness
Bayhydur® XP 2700 HDI 65 PDGME 10.6 396 77 Suitable as a hardener for aqueous 2K PUR systems.
Specially used for applications where the ease of mixing the hardener by manual stirring is a key requirement
Bayhydur® XP 2759 IPDI 70 MPA 11.0 382 6000 Used for a hardener in 2K PUR systems
Yields coatings with high chemical and weather resistance
Bayhydur® XP 7165 HDI 100 — 18.3 229 1000 2K waterborne PUR systems for automotive refinish, plastics, industrial coatings and wood furniture
Low viscosity, easily dispersible, weather stable, non-yellowing, good gloss and chemical resistance
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
5
Desmodur® – Water Dispersible Crosslinkers for Adhesive Applications
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® DA-L HDI 100 — 20.0 210 3000 Crosslinker for waterborne adhesives systems
High functionality produces improved water resistance, reacts under ambient conditions and improves the resistance of adhesive bonds to moisture, heat, plasticizers and many solvents
Desmodur® DN HDI 100 — 21.8 193 1250 Crosslinker for waterborne adhesives systems
Lower viscosity for improved dispersibility, crosslinking increases resistance of bonds to heat, water, plasticizers and many solvents
Desmodur® BL – Thermoreactive Crosslinkers for 1K Polyurethane Baking Systems
ProductChemical Base Solids % Solvent
Blocked NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® BL 1100/1 TDI 100 — 3 1400 43000 Hardener for lightfast, stoving PUR systems for dipping and curtain coatings, adhesive cements and automotive repair
Improves flexibilty, tear and stone-chip resistance of stoving coating systems
Desmodur® BL 1265/1 MPA/X
TDI 65 MPA/X 4.8 875 22500 As a crosslinker it can be used for the inside of tubes, can coatings and stone-chip primer surfaces
Formulates 1K stoving coatings, increases film hardness and low-temperature crack resistance
Desmodur® BL 3175A HDI 75 SN 100 11.1 378 3000 Hardener for industrial finishing, coil and can coatings and the automotive industry for chip-resistant primer surfaces and topcoats
High flexibility , good adhesion, weather stable, good chemical resistance
Desmodur® BL 3272 MPA
HDI 72 MPA 10.2 410 2300 Hardener in 1K PUR baking systems for coil coating and industrial finishes
Outstanding flexibility, good hardness, weather stability and resistance to scratching, abrasion and thermal yellowing; especially for high build systems
Desmodur® BL 3370 MPA
HDI 70 MPA 8.9 472 3200 Hardener for industrial finishing of appliances, coil and can coatings and the automotive industry for chip-resistant primer surfaces and topcoats
Low baking temperature, high reactivity, weather stable and improves reactivity in adhesion
Desmodur® BL 3475 BA/SN
HDI/IPDI 75 BA/SN 100(1:1)
8.2 510 1000 Hardener in 1K PUR baking systems for industrial finishes and can/coil coating
Low baking temperature, high reactivity, weather stable and improves flexibility in adhesion
Desmodur® BL 4265 SN IPDI 65 SN 100 8.1 519 11000 Hardener in 1K PUR baking systems for automotive OEM, can/coil coating and industrial finishes
Good chemical resistance, high hardness, light stable
Desmodur® BL 5375 H12MDI 75 MPA/SN 100(1:1)
8.9 470 4000 Hardener for lightfast baking PUR systems, formulates high-quality industrial finishes, especially coil/can coatings
Improves flexibility, tear resistance and adhesion of baked coating systems
Desmodur® BL 2078/2 IPDI 60 SN 100 7.0 600 1750 Can/coil coatings, industrial finishes Good resistance to thermal yellowing, improves adhesion and elasticity, good weathering stability, FCN approved for use in food can coatings
Desmodur® PL 340 BA/SN
IPDI 60 BA/SN 100
(18:22)
7.3 575 600 Hardener in 1K PUR baking systems for automotive OEM, can/coil coating and industrial finishes
Low baking temperature, flexible, good chemical resistance and highly resistant to thermal yellowing and weathering
Desmodur® PL 350 MPA/SN
HDI 75 MPA/SN 100 (8:17)
10.5 400 4300 Hardener in 1K PUR baking systems for automotive OEM, can/coil coating and industrial finishes
Low baking temperature, highly resistant to thermal yellowing and weathering
6 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Bayhydur® – Thermally Activated Polyurethane Hardener for 1K Waterborne Baking Systems
ProductChemical Base Solids % Solvent
Blocked NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Bayhydur® BL XP 2706* HDI/IPDI 40 Water (pH 8-9)
3.3 1275 2500 1K Waterborne systems for industrial coatings, glass and metal coatings
Improved reactivity and thermal stability, high hardness, good adhesion, chemical resistance, lightfast
Bayhydur® BL 5335 H12MDI 35 Water/MPA/X
(56:4.5:4.5)
2.5 1680 20 (sec) 1K Waterborne PUR systems for industrial coatings applications
High flexibility, good adhesion, weather stable, good chemical resistance, especially versus alkali
* NOT TSCA listed
Desmodur® Z – IPDI Trimer
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® XP 2565 IPDI 80 BA 12 350 2800 Suitable for transportation and industrial coatings and theformulation of high-solids and 2K Waterborne PUR systems for automotive refinishing
Hardener component for weather-stable coating systems
Desmodur® Z 4470 BA IPDI 70 BA 11.9 360 550 2K PUR systems for automotive OEM and refinish, additive in alkyd refinish systems, and industrial finishing
Outstanding weather stability and mechanical properties, good gloss retention, light stable, good chemical resistance as well as good drying properties. HAPs free and compatible with aliphatic solvents
Desmodur® Z 4470 MPA/X
IPDI 70 MPA/X (1:1)
11.9 360 1350 2K PUR systems for automotive OEM and refinish, additive in alkyd refinish systems, and industrial finishing
Outstanding weather stability and mechanical properties, good gloss retention, light stable, good chemical resistance as well as good drying properties. HAPs free and compatible with aliphatic solvents
Desmodur® Z 4470 SN IPDI 70 SN 100 11.9 360 1700 2K PUR systems for automotive OEM and refinish, additive in alkyd refinish systems, and industrial finishing
Outstanding weather stability and mechanical properties, good gloss retention, light stable, good chemical resistance as well as good drying properties. HAPs free and compatible with aliphatic solvents
Desmodur® Z 4470 SN/BA
IPDI 70 SN 100/BA (2:1)
11.9 360 1000 2K PUR systems for automotive OEM and refinish, additive in alkyd refinish systems, and industrial finishing
Outstanding weather stability and mechanical properties, good gloss retention, light stable, good chemical resistance as well as good drying properties. HAPs free and compatible with aliphatic solvents
Desmodur® – HDI / IPDI Crosslinkers for Polyurethanes
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® XP 2489 HDI/IPDI 100 — 21 200 22500 ± 2500
Hardener in 2K PUR for lightfast coating systems, good gloss retention and mechanical properties, automotive OEM, automotive refinish, transportation, industrial finishing and plastics
High chemical resistance and weathering, good gloss
Desmodur® XP 2838 HDI/IPDI 100 — 21 2700 2700 2K PUR systems for floor coatings, automotive refinish, industrial finishes and plastics
Solvent-free hardener, good weathering and chemical resistance. Very good gloss retention and mechanical properties
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
7
Aliphatic Prepolymers
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® WP-260 H12MDI 100 — 26.4 159 280 Typical uses include tooling resins, potting, encapsulation and decorative applications
Light-stable elastomers, polyether prepolymer based on PPG
Desmodur® E 3265 MPA/S
HDI 65 MPA/SN 100
(6:29)
10.4 404 1200 Moisture-curing 1K PUR systems that are suitable for use in the formulation of colorfast outdoor coatings
Good weathering and non-yellowing; very good resistance to solvents, abrasion and chemicals
Desmodur® VP LS 2371 IPDI 100 — 3.7 1100 9800 Binder for elastic coatings and surface sealing compounds
Provides resistance to hydrolysis
Desmodur® XP 2406 IPDI 80 MPA 2.8 1500 7000 Binder for the formulation of flexible surface coatings and sealers
Very good storage stability, flexible to enable blister-free systems
Desmodur® XP 2599 HDI 100 — 6 700 2500 Hardener for solvent-free polyurethane coatings
Flexibilizing properties, used primarily for hardening pipe coating systems
Desmodur® XP 2617 HDI 100 — 12.5 336 4250 2K polyurethane, polyurea, and hybrid sealants
Low monomer content, largely linear prepolymer
Desmodur® XP 2763 HDI/IPDI 86 BA 10.2 412 2100 For use with polyaspartics, and in the formulation of MC and 1K PUR coatings
Good weathering and gloss retention, non-yellowing, controlled reactivity allowing high film builds, and stability and chalk resistance in pigmented formulations
Low Functionality Crosslinkers for Polyurethanes
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® LD HDI 100 — 12.1 347 75 Water scavenger for pigmented moisture-curing 1K PUR systems
Non-yellowing with good lightfastness and weather stability
Aromatic Crosslinkers for Polyurethanes
ProductChemical Description
Commercial Form
NCO Wt. %
Visc. mPa•s
Equiv. Wt.
Typical Functionality Application Areas Features/Benefits
Mondur® MB 4,4’ isomer of MDI Fused flaked or molten
33.6 Solid 125 2 Elastomers, TPUs, adhesives, coatings, fibers
High performance PUR; special storage temperature required
Mondur® MLQ Mixture of 4,4’ and 2,4’ isomers of MDI
Light yellow liquid 33.6 10 125 2 Synthetic surfaces, binders, elastomers, coatings, adhesives, sealants
Low vapor pressure, good low-temperature properties
Mondur® MQ 4,4’ isomer of MDI Fused or molten 33.6 Solid 125 2 Synthetic surfaces, binders, elastomers, coatings, adhesives, sealants
High performance PUR, special storage temperature required
Mondur® TDS 2,4’ Isomer of TDI Clear to light yellow liquid
48 3 88 2 Elastomers, coatings, adhesives, foams
High-reactivity rate with low monomer content
Mondur® TD-65 65/35 mixture of 2,4’ and 2,6’ isomers of TDI
Clear to light yellow liquid
48 3 88 2 Formulation of flexible polyester and polyether urethane foams and in the high performance sealants
Unique isomer ratio
Mondur® TD-80 80/20 mixture of 2,4’ and 2,6’ Isomer of TDI
Clear to light yellow liquid
48 5 88 2 Elastomers, coatings, adhesives, sealants, foams
Excellent flowability, low temperature stability, largest commercial TDI version
Special TDI Blends Covestro can also produce blends of its TDI products to offer custom isomer ratios. Contact our Product Management Group for more information at 1-844-646-0545.
Special Blends TDI and MDI
Covestro can also produce blends of its TDI and MDI to meet customer needs. Contact our Isocyanate Product Management Group for more information at 1-844-646-0545.
Special MDI Blends Covestro can also produce blends of its MDI products to offer custom products. Contact our Product Management Group for more information at 1-844-646-0545.
8 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Modified MDI Crosslinkers for Polyurethanes
ProductChemical Description
Commercial Form Solids %
NCO Wt. %
Visc mPa•s
Equiv. Wt.
Typical Functionality Application Areas Features/Benefits
Mondur® PF Modified MDI Light yellow liquid
100 22.9 650 183 2 High-property sealants Liquid 4,4’ -MDI prepolymer modified MDI
Mondur® PC Modified MDI Clear to light yellow liquid
100 25.8 145 163 2.1 Elastomers, high-property sealants
Low viscosity; high performance
Mondur® CD Uretonimine modified MDI
Clear to yellow liquid
100 29.5 50 143 2.1 High performance elastomers, sealants, adhesives
Low viscosity; high NCO content
Desmodur® L/IL/HL Crosslinkers for Polyurethanes
ProductChemical Base Solids % Solvent
NCO Wt.%
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
DESMODUR® L
Desmodur® L 67 BA TDI 67 BA 11.9 350 600 Furniture, parquet flooring, metal, paper, plastics and mineral substrates
Used to formulate air-drying two-component polyurethane coatings and adhesives
Desmodur® L 67 MPA/X TDI 67 MPA/X (1:1)
11.9 350 1600 Furniture, parquet flooring, metal, paper, plastics and mineral substrates
Used to formulate air-drying two-component polyurethane coatings and adhesives
Desmodur® L 75 TDI 75 EA 13.3 315 1600 Coatings and adhesives for furniture, parquet flooring, metal, paper, plastics and metal substrates
Used to formulate air-drying 2K PUR coatings and adhesives, increases the resistance of the bonds to heat, oil, plasticizers and many solvents; ensures good adhesion to many materials, especially plastics, and the pale inherent color permits its use in bonding transparent plastic films for packaging
DESMODUR® IL
Desmodur® IL BA TDI 51 BA 8.0 525 2000 Furniture, wood and paper substrates Extremely fast-curing, early sandability, and fast drying 2K PUR coatings for wood and metal
Desmodur® IL EA TDI 51 EA 8.0 525 700 Coatings for on-line application such as packaging and industrial furniture finishing, used to bond many materials such as wood, metal and plastics
Extremely fast-curing, fast initial drying and early sandability, suitable for room temperature crosslinking, increases resistance of bonds to heat, oil, plasticizers and many solvents, ensures good adhesion to many materials, especially plastics
DESMODUR® HL
Desmodur® HL BA HDI/TDI 60 BA 10.5 400 2200 Can be used for fast-drying clear and pigmented wood coatings which can be sprayed or curtain coated, and for fast drying coatings for metal substrates
Rapid initial drying, fast-curing, early sandability, good lightfastness, high-bodied, clear or pigmented finishes, and improved light stability over Desmodur L
Desmodur® R Crosslinkers for Polyurethanes
Product Chemical Description Solids % SolventNCO Wt.%
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
Desmodur® RC TDI trimer 35 EA 7.0 600 3 Especially useful for crosslinking pale-colored adhesives used to bond rubber-based materials
Crosslinker for solventborne polyurethane and polychloroprene adhesives, light-colored product, slower cure than Desmodur® RE or RFE
Desmodur® RE TDI Adduct 27 EA 9.3 452 3 Crosslinker for solventborne polyurethane and polychloroprene adhesives
Rapid curing, high heat resistance
Desmodur® RFE TDI Adduct 27 EA 7.2 583 3 Crosslinker for solventborne polyurethane and polychloroprene adhesives
Rapid curing, high heat resistance
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
9
Polymeric MDI Crosslinkers for Polyurethanes
ProductChemical Description
Commercial Form Solids %
NCO Wt.%
Equiv. Wt.
Visc. mPa•s
Typical Functionality Application Areas Features/Benefits
Desmodur® VL Modified Polymeric MDI
Brown liquid 100 31.5 90 133 2.4 Coatings, elastomers Low viscosity, low vapor pressure, low functionality, extended open time
Mondur® 448 Modified Polymeric MDI
Brown/Amber liquid
100 27.7 150 152 2.2 Adhesives, coatings, elastomers, synthetic surfaces, binders
Low vapor pressure, low functionality
Mondur® 582 2,4’- enriched Polymeric MDI
Brown/Amber liquid
100 32.0 55 131 2.5 Coatings, adhesives, elastomers
Low vapor pressure, low viscosity, extended open time, low functionality
Mondur® 1488 2,4’- enriched Polymeric MDI
Brown/grey liquid
100 32.4 28 130 2.3 Coatings, adhesives, elastomers, encapsulants
Low functionality, low vapor pressure, extended open time
Mondur® MR Light Polymeric MDI Brown/light amber liquid
100 31.5 200 133 2.8 Coatings, adhesives, encapsulants
Multi-purpose encapsulants, low functionality, low vapor pressure
Mondur® MR-5 Polymeric MDI Brown/Amber liquid
100 32.5 50 129 2.4 Coatings, adhesives and specialty elastomers
Low viscosity, high monomer, low functionality, low vapor pressure
Mondur® MRS 2,4’-rich Polymeric MDI
Brown/ amber liquid
100 31.5 200 131 2.8 Coatings, adhesives, sealants
Low vapor pressure, low functionality
Mondur® MRS-2 (only sold in bulk quantities)
2,4’-MDI rich Polymeric MDI
Amber liquid 100 33.0 25 127 2.2 Coatings, elastomers, encapsulants, adhesives
Low functionality, low vapor pressure, extended open time
Mondur® MRS-4 2,4’-MDI rich Polymeric MDI
Brown/ grey liquid
100 32.5 40 129 2.4 Coatings, elastomers, structural adhesives, encapsulants, synthetic surfaces
Low viscosity, excellent low temperature stability, extended open time, low functionality, low vapor pressure
Additional Polymeric MDI products are available. Contact our Product Management Group for more information at 1-844-646-0545.
Prepolymers
ProductChemical Base Solids % Solvent
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Application Areas Features/Benefits
TDI PREPOLYMERS
Desmodur® E-1160 MPA/X
TDI 60 MPA/X (1:1) 5.4 780 550 Used for wood coatings, wall and ceiling paneling, boats and furniture; clear impregnating systems
Provide long-term protection against moisture, oil, fuel, chemical and mechanical damage
Desmodur® E-14 TDI 100 — 3.3 1270 6800 Construction sealants Can be combined with hardeners to formulate highly flexible sealers. Used in1K PUR formulations will improve flexibility
10 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Prepolymers (cont)
ProductChemical Base Solids %
NCO Wt. %
Equiv. Wt.
Visc. mPa•s Applications Features/Benefits
MDI PREPOLYMERS
Baytec® MP-030 MDI 100 3.8 1105 8000 Used in rubber crumb binders, flexible caulks and sealants
Low viscosity and low isomer content
Mondur® 1437 MDI 100 10.0 420 2500 Used in moisture-cured binders Processing ease and low viscosity
Mondur® 1453 MDI 100 16.5 255 600 Used in the formulation of binders, cast elastomers, two-component adhesives, caulks and sealants and spray elastomer systems
Typically used in polyurea spray systems for concrete
Desmodur® E-23A MDI 100 16.5 255 1600 One-component moisture-cure adhesive for bonding wood and other substrates; can also be used as a one-component primer and concrete sealant or two-component thick section coating
2K PUR coatings and sealants with good abrasion resistance, toughness, and flexibility
Desmodur® E-28 MDI 100 16.5 255 6100 1K MC PUR adhesive for wood and to prime and seal porous substrates
Can be formulated to contain zinc as zinc-rich primers that give galvanic protection
Desmodur® E-210 MDI 100 10.0 420 2500 2K polyurea caulks and sealants Longer gel times and improved physical properties
Desmodur® E-743 MDI 100 8.0 525 2500 Suitable as a moisture-cure coating for concrete
Produces 1K highly resilient,rubbery-like films with an extremely high abrasion resistance
Desmodur® E-744 MDI 100 23.5 179 600 These coatings can be used as high solids or solvent-free systems in application areas such as membranes, deck coatings, pipe coatings, roof coatings, binders, encapsulants, product finishing, or coatings for solvent-sensitive substrates such as polystyrene foams and other plastic materials
Produces 2K coatings that have good toughness and elasticity
Desmocap® – Epoxy FlexibIlizers
ProductChemical Base Solids %
Blocked NCO Wt. %
Equiv. Wt.
Visc. mPa•s Applications Features/Benefits
Desmocap® 11A TDI 100 3.0 1400 90000 When combined with epoxy resins takes on the function of a reactive flexibilizer
High viscosity; used as an epoxy flexibilizer and to formulate liquid, solvent-free PUR systems
Desmocap® 12A TDI 100 2.1 2000 33000 For use in the flexibilization of epoxy resins and the formulation of flexible coatings and sealing compounds
High viscosity; used as an epoxy flexibilizer and to formulate lliquid, solvent-free PUR systems
Desmoseal® – Silane Terminated Prepolymers
Product Solids % DiluentVisc.
mPa•s Applications Features/Benefits
Desmoseal® S XP 2458 90 Mesamoll 35000 Used as a binder for solvent-free, moisture-curing 1K systems
Moisture cures with the absence of bubbles and blisters
Desmoseal® S XP 2636 100 — 40000 Suitable for solvent-free, moisture-curing 1K systems For moisture-curing coatings, sealants and adhesives
Desmoseal S XP 2749 100 — 4500 Suitable as a binder for producing flexible adhesives, sealants and coatings
Solvent-free, moisture-curing 1K systems that cure without bubbles or blisters
MDI Allophanates
Product Solids %NCO
Wt. %Visc.
mPa•sEquiv.
Wt. Applications Features/Benefits
Mondur® MA-2300 100 23.0 450 183 Solvent-free 2K for use in truck bedliners, adhesives, sealants and carpet backing
Low freeze point; high solids
Mondur® MA-2603 100 16.0 1050 263 Used in spray elastomers for coatings, adhesives and sealants
Low freeze point
Mondur® MA-2902 100 29.0 40 145 Solvent-free 2K coatings, adhesives and sealants
High solids
Additional allophanate products are available. Contact our Product Management Group for more information at 1-844-646-0545.
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
11
Amine Functional Coreactants
ProductVisc.
mPa•sEquiv.
Wt.Amine Value Application Areas Features/Benefits
Desmophen® NH 1220 100 max. 230 240-248 May be used by itself or as a blend with hydroxy-functional acrylic resins and crosslinked to yield high solids polyurethane/urea clearcoats
Very low viscosity amine functional coreactant or reactive diluent of high reactivity
Desmophen® NH 1420 900-2000 279 199-203 For use in the formulation of high solids 2K polyurethane/polyurea coatings
Amine functional coreactant or reactive diluent with longer gel time.
Desmophen® NH 1520 800-2000
290 189-193 For use in the formulation of high solids 2K polyurethane/polyurea coatings
Amine functional coreactant or reactive diluent with longer gel time, less flexible coatings.
Desmophen® NH 1521 110-210 325 168-176 Use in the formulation of high solids 2K polyurethane/polyurea coatings
Amine functional coreactant supplied in 10% butyl acetate
Desmophen® NH XP 2701
1100-2200 275 204 For use in the formulation of high solids 2K polyurethane/urea coatings
Provides faster final cure propertiesas well as higher coating hardness
Desmophen® NH 2850 100 295 190 High solids, 2K polyurethane topcoats and solvent-free coatings
Not suitable for exterior applications requiring good gloss retention
Impranil® High Solids Thermally Activated Polyurethane Hardeners for Textile Applications
ProductChemical Description Solids % Solvent
Visc. mPa•s
100% Modulus, psi
Tensile strength, psi
Elongation % Applications Features/Benefits
Impranil® HS-62 Aromatic/Polyether
98 PGMEA 50000-90000
290 1160 660 Suitable for the transfer coating process as topcoats, intermediate coats (compact or foamed), adhesion coats and by the direct coating process as single- or double-sided coatings applied in one or more coats
Low solvent, high film thickness possible in one coat, outstanding hydrolysis resistance
Impranil® HS-80 Aromatic/Polyether
90 PGMEA 40000-70000
652 3626 450 Suitable for the transfer coating process as topcoats, intermediate coats (compact or foamed), foamed films and by the direct coating process as single or double-sided coatings
Low solvent, high film thickness possible in one coat, outstanding hydrolisis resistance
Impranil® HS-85 LN Aromatic/Polyether
80 PGMEA 50000-100000
652 4350 400 Suitable for the transfer coating process as topcoats, intermediate coats (compact) and by the direct coating process as single or double-sided coatings
Exhibits outstanding resistance to hydrolysis, long pot life
Impranil® HS-130 Aromatic/Polyether
100 None 100000-160000
1450 3625 400 Suitable for the transfer coating process as topcoats, intermedate coats (compact or foamed), adhesion coats, foamed films and by the direct coating process as single- or double-sided coatings applied in one or more coats
Outstanding resistance to hydrolysis, and has a long pot life. A high film thickness is possible in one coat
12 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Imprafix® Crosslinking Agents and Catalysts
ProductChemical Base Solids % Solvent
Visc. mPa•s
NCO % as supplied Features/Benefits
Imprafix® 2794 HDI 38 — 1500 12.7 Waterborne 1K systems for industrial coatings applications, glass, textiles and metal. Improved reactivity and thermal stability, high flexibility, good adhesion, good chemical resistance, lightfast
Imprafix® HS-C AlkyL Amine 100 — N/A N/A Crosslinker for Impranil® HS products
Imprafix® TH Solution TDI 75 Ethyl Acetate
1200-2000
13.3 Crosslinker for waterborne products
Impranil® 1K Polyurethane Solutions for Textile Applications
ProductChemical Description Solids % Solvent
Visc. mPa•s
100% Modulus,
psi
Tensile strength,
psiElongation
%Softening Range ºC Features/Benefits
Impranil® 43031 Solution
Aliphatic/Polyester
25 Toluene/ IPA/PGME
7000- 15000
4350 5075 175 195-205
Used as a topcoat for lining textile materials and finish for PVC coatings
Impranil® ELH A/1 Aliphatic/Polycarbonate
30 Toluene/ IPA/PGME
27500-42500
1087 7250 400 190-200
Transfer and direct process as topcoat, light-stable
Impranil® EWN-13 Solution A
Aromatic/Polyether
35 DMF/ Toluene/
MEK
15000-30000
435 2175 700 150-160 Transfer and direct process as topcoat, excellent hydrolysis resistance, manufacture of textile materials
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
13
Bayhydrol® – PUR Dispersions for 1K Coatings
ProductDispersion Type
Solids wt. %
(approx)Cosolvent % (approx) Cosolvent
Visc. mPa•s pH
Tensile Strength,
psi (typical)
Elong. at break, % (typical)
100% Modulus,
psi (typical)
Tg (ºC) (typical)
Acid # Based on
Solids Applications Features/Benefits
Bayhydrol® 110 PES 35 15 NMP 50-300
7.5-9.5
5900 180 4200 -22 16.8 Wood, metal, vinyl-coated fabric, business machine housings and other plastic parts
Film hardness, flexibility, good water and abrasion resistance, excellent solvent resistance
Bayhydrol® 124 PC 35 12 NMP 50-400
7.0-9.0
5000 275 1300 -32 13 Rigid and flexible substrates such as leather, vinyl-coated fabric, textiles, plastics and metals
Flexibility, good water and solvent resistance, and outstanding hydrolytic stability
Bayhydrol® 140 AQ
PES 40 0 — 100-700
6.0-8.0
5300 450 800 -45 0 Adhesion promoters in metal/plastic composite structures, textile and leather coatings and primers for rigid surface coatings
Highly flexible coatings, excellent mechanical stability
Bayhydrol® PR 435
PES 35 5 NMP 10-900
7.0-9.0
3000 200 2500 -45 19.0 Automotive refinish, primer-surfaces, flexible flooring applications
Fast drying, good early sandability, abrasion resistance, durability and resistance to humidity
Bayhydrol® UH 240
PES 40 0 — Max 70
sec (DIN4)
6.0-8.0
5000 1500 300 -47 0 Flexibilization of 2K industrial coatings, as well as soft-touch coatings
Fast drying, high elongation, good water resistance and early sandability
Bayhydrol® UH 340/1
PEth/PC 40 0 — Max 70
sec (DIN4)
6.0-7.0
3500 500 350 -47 0 Used as a binder in highly flexible water-thinnable coatings for wood, metal, plastics and mineral substrates
Highly elastic for the flexibilization of hard PAC and PUR dispersions for 1K industrial coatings
Bayhydrol® UH 2305
PE 50 0 — <70 sec
(DIN4)
6.5-8.5
4300 1000 290 -50.5 0 Used in combination with hydroxy functional resins for highly flexible 2K soft feel coatings
Yields filmswith a soft-touch and good resistance to abrasion and water
Bayhydrol® UH 2558
PE 37 0 — Max 40
sec (DIN4)
7.0-9.0
6500 350 2900 -70 N/A Wood coating Very good wet film transparancy and abrasion resistance, hard yet flexible films, high resistance to yellowing
Bayhydrol® UH 2606
PC 35 0 — 12-60 sec
(DIN4)
7.0-9.0
4350 180 N/A -50 0 Plastic substrates and wood materials, PVC floor coatings
Broad adhesion profile, tough yet flexible with very high hardness, yields coatings with good leveling, chemical and weather stabilities
Bayhydrol® UH 2952/1
PC 40 0 — 10-30 sec
(DIN4)
6.5-7.5
5500 400 1050 -41.5 12 Automotive basecoat, binder for waterborne, air and oven drying basecoats in two layer systems for automotive, plastics, automotive refinish and industrual coatings
High resistance to yellowing, very good wet film transparency and very good abrasion resistance. Films are hard but flexible
Bayhydrol® UH XP 2660
PES/PUR 40 0 — 10-30 6.0-8.0
5800 400 2000 -22 0 Used in the formulation of highly flexible 2K PUR topcoats
Yields films with good surface handle, very good resistance to solvents and very good hydrolytic stability
Bayhydrol® XP 2637
PC 40 0 — <500 6.5-8.5
3500 220 1100 -33 9.9 Rigid and flexible substrates such as leather, vinyl-coated fabric, textiles, plastics and metals
Flexible, outstanding weathering, good abrasion resistance
14 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Bayhydrol® – Oxidatively Curing PES/PUR Dispersions for 1K Systems
ProductSolids wt.
%Cosolvent
% CosolventVisc.
mPa•s pH
Tensile Strength,
psi (typical)
Elong. at break, % (typical)
100% Modulus,
psi (typical)
Tg (ºC) (typical) Applications Features/Benefits
Bayhydrol® UH 2342
35 5 NMP <100 6.7 - 8.2
4350 280 2422 -77 Wood flooring Outstanding mechanical and chemical resistance properties, good black heel mark resistance
Bayhydrol® UH 2557*
35 0 — <100 7.0-9.0
4350 280 2234 -77 Wood flooring Outstanding mechanical and chemical resistance properties, especially its black heel mark resistance
Bayhydrol® UH XP 2592
45 0 — 300 7.2 N/A N/A N/A 30 Mainly used for general industrial finishes
High gloss and good anti-corrosion characteristics, quick drying, high hardness
Bayhydrol® UH 2593/1
35 0 — ≤ 250 8.0-9.0
6500 39 N/A -64 Wood flooring Good resistance against yellowing, very good wet film transparency, high hardness and good black heel mark resistance
* TSCA pending
SolventAbbreviation Explanation Abbreviation Explanation
BA n-butyl acetate NMP n-methylpyrrolidone
BG Butyl glycol PGME propylene glycol methyl ether
DMF dimethylformamide PGnBE propylene glycol n-butyl ether
EA ethyl acetate MPA PM acetate
EGMBE ethylene glycol monobutyl ether SN100 aromatic 100
i-BuOH isobutyl alcohol X xylene
IPA isopropyl alcohol PDGME dipropylenglycoldimethylether
MEK methyl ethyl ketone
Chemical DescriptionAbbreviation Explanation Abbreviation Explanation
PES polyester PC n-polycarbonate
PUR polyurethane PEth polyether
PAC polyaspartic
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
15
Bayhydrol® – OH Functional Dispersions for Waterborne 2K Systems
ProductDispersion Type
Solids wt. %
Cosolvent % Cosolvent
Visc. mPa•s pH
% OH based on
solid resin (approx) Applications Features/Benefits
Bayhydrol® A 145 PAC 45 8 SN100/2-butoxyethanol
(1:1)
400-1500
7.5-8.5 3.3 Automotive and industrial; suited for high-gloss, clear and pigmented topcoats, primers and automatic windows
Films are hard and flexible with good single-coat adhesion and good resistance to solvents and water
Bayhydrol® A 2058 PAC 43 2 BG 200-2000
7.5-9.5 4.8 High-gloss flexible topcoats as well as primers and plastics
Flexible, good hydrolysis resistance, good pigment wetting properties and high shear stability
Bayhydrol® A 2470 PAC 45 8 SN100/PGnBE (1:1)
1500-3000
7.0-8.0 3.9 General industrial metal and plastics
Yields high-gloss topcoats which are hard and flexible with outstanding resistance to solvents and water, and have excellent weatherability, good pigment wetting properties and high shear stability
Bayhydrol® A 2542 PAC 50 1 PGnBE 1000-3500
7.0-8.0 3.8 Coatings for use on substrates such as wood, metal and plastic
Hard, very high gloss, good chemical resistance, outstanding water resistance
Bayhydrol® A 2546 PAC 41 0 — ≤200 7.0-9.0 4.8 2K PUR coatings and sealers for mineral substrates and reactive resins (EP, PUR).
Outstanding mechanical and chemical resistance, especially good when hot tire resistance is required
Bayhydrol® A 2601 PAC 45 8 SN100/PGnBE (1:1)
1500-3000
7.0-8.0 3.9 General industrial and transportation
Film is hard and tough yet flexible; exhibits high gloss, good filling power, good weather and light stability, rapid drying, good resistance to solvents and gasoline
Bayhydrol® A 2646 PAC 50 1 PGnBE 1000-3500
7.0-8.0 3.8 Hard high-gloss sealers for mineral substrates and reactive resins (EP, PUR), coatings for use on substrates such as wood, metal and plastic; especially suited for concrete flooring
Outstanding mechanical and chemical resistance
Bayhydrol® A 2651 PAC 41 3.4 PGnBE ≤200 8.0-9.0 3.0 Clear 2K PUR coatings as well as pigmented coatings, especially suited for 2K wood coating systems
High gloss and matte, very good film transparency and high wood warmth
Bayhydrol® A 2695 PAC 41 7.6 PGnBE 2000-3500
7.2-8.2 5.0 Suited for air and forced drying systems
Lightfastness, glossy, hard and tough yet flexible, good weather stability and superior chemical resistance
Bayhydrol® A XP 2770* PAC 44.5 3.6 PGnBE 200-1200
7.0-9.0 3.9 Yields high-gloss topcoats which can be dried at room temperature or force-dried. e.g. at 80°C
Hard and flexible with outstanding resistance to solvents and water, excellent weatherablility, good pigment wetting properties and high shear stability
Bayhydrol® U 241 PES/PUR 41 4.5 NMP 500-1500
7.8-8.8 2.5 Used in the formulation of both stoving industrial and automotive primer surfaces and 2K PUR primers along with topcoats for plastics
Characterized by its good pigment wetting and high shear stability
Bayhydrol® U 355 PES/PUR 55 2 NMP 250-650
7.0-7.5 1.5 Used as a binder for the formulation of water-thinnable soft-feel and suede effect coatings
Used in soft-touch coatings; can be applied using conventional spraying techniques
Bayhydrol® U XP 2698 PES/PUR 52 0 — 500-2500
6.2-7.7 1.5 Used as a binder for the formulation of water-thinnable soft-feel and suede effect coatings
Used in soft-touch coatings; can be applied using conventional spraying techniques
Bayhydrol® U XP 2757 PC-ester/PUR
52 0 — 500-1500
7.2-8.2 1.0 Used primarily as a binder for the formulation of water-reducible, 2K PUR coatings, especially soft-touch
High elasticity, good chemical and scratch resistance
Bayhydrol® XP 7110 E PUR 40 10 NMP 100-3000
8.0-10 3.9 Commonly used as the reaction partner in 2K WB PUR low VOC coatings
Suited for high gloss with good chemical and abrasion resistance. Also has good film flexibility while maintaining a high degree of hardness
* Can be used in 1K systems with Blocked Polyisocyanates
16 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Bayhydrol® UV-Curable PUR Dispersions
ProductSolids wt. %
Visc. DIN 4 mm cup, sec pH Furniture Plastics Cork Parquet
General Industrial PVC Applications Features/Benefits
Bayhydrol® UV 2282 39 <50 7.0-8.5 ES S ES ES ES All-around use (multicoat) especially for use on wood and wood materials
Standard resin with well-balanced property profile, good adhesion on various plastics
Bayhydrol® UV 2317 37 15-80 6.5-8.5 ES S ES ES ES Especially for application on wood/wood materials
Good re-emulsification properties and high wet film transparency
Bayhydrol® UV XP 2280 39 12-70 6.8-8.2 ES S Especially for application on wood/wood materials
Very good initial physical drying and particularly good for pigmented systems
Bayhydrol® UV XP 2687*
49 50-500
mPa•s
6.8-8.5 S ES ES S Particularly well suited for primers
Good adhesion and grain wetting/essentuation, high solids, high gloss, excellent chemical resistance, good re-emulsification
Bayhydrol® UV 2689/1 XP
42 15-50 7.0-8.5 S ES ES S Especially good for formulating UV WB coatings for plastics
High gloss, hardness, good leveling, chemical and mechanical resistance
Bayhydrol® UV XP 2690 39 20-500
mPa•s
7.0-9.0 ES S S ES ES Especially good for applications on exterior wood materials
Optimum weatherability and excellent chemical resistance, hard and tough yet flexible, fast water release
Bayhydrol® UV 2792 XP*
39 <100 mPa•s
3.0-4.0 ES ES Good for primer formulations especially for applications on wood or wood materials
Excellent grain wetting/accentuation, very good barrier with adhesion and tannin blocking effects, very fast re-emulsification
*TSCA Pending ES = Especially Suitable S = Suitable
Baybond® – PUR Dispersions for Glass Fiber Sizing
Product Type Solids, wt. %Visc. (sec) DIN 4 cup pH
Tensile Strength psi
Elongation at break,%
100% Modulus, psi Tg (˚C)
Baybond® PU 330 Polyester 30 30-140 6.5-8.0 145 2000 73 -56
Baybond® PU 401A Polyester 50 ≤70 6.5-8.5 7400 1200 435 -51
Baybond® PU 402A Polyester 40 15-400 6.0-8.0 5100 450 800 -45
Baybond® PU 403 Polyester 39 11-18 6.0-8.0 5500 1000 500 -47
Baybond® PU 405 Polyether 33 11-18 6.0-8.0 1600 400 650 -65
Baybond® PU 406 Polyether 35 10-22 5.5-7.5 2900 700 540 -64
Baybond® XP 2569 Polyester 41 10-25 7.0-10.0 4900 750 670 -44
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
17
Impranil® – Aqueous PUR Dispersions for Textile Coatings
Product TypeSolids wt. %
(approx)Visc. (sec) DIN 4 cup pH
Tensile Strength, psi
(typical)
Elong. at break, % (typical)
100% Modulus, psi
(typical)Tg (ºC)
(typical) Features/Benefits
Impranil® DAH Aromatic/PE 35 50-1000 mPa•s
7.0-9.0 1500 700 300 -45 Flexible tie coat with good resistance to hydrolysis, affinity to high solids and different kinds of substrates
Impranil® DL 1380* PES 60 ≤90 5.0-8.0 3625 1500 203 -47 High flexibility, high solid content, soft handle and good lightfastness
Impranil® DL 1537* PES 59 15-60 6.0-8.0 2175 1200 188 -4 Very good resistance to hydrolysis, good adhesion, suitable for mechanical foaming, soft handle, high lightfastness, good stirring stability
Impranil® DL 1554 PES 60 ≤1000 mPa•s
6.5-8.5 3770 1000 362 -49 Exhibits high flexibility, high lightfastness and is also suitable for mechanical foaming
Impranil® DL 2611 PES 40 10-30 5.5-8.5 5800 400 2000 -33 Very good resistance to hydrolysis and adhesion on certain types of PVC plastisols, high lightfastness, high scratch resistance, possesses a dry surface with good sliding properties
Impranil® DLC-F PC 40 10-50 6.5-8.5 7200 600 725 -35 Very good resistance to hydrolysis, good resistance to aging, high scratch resistance, good lightfastness and high flex resistance
Impranil® DLH PES 40 14-40 5.5-7.5 7252 1000 725 -37 This product exhibits high flexibility, lightfastness and adhesion. It is also suitable for mechanical foaming
Impranil® DLN-SD PES 40 ≤70 5.0-8.0 5000 1500 300 -47 High flexibility, soft handle, suitable for mechanical foaming, good lightfastness
Impranil® DLP-R PES 50 12-30 6.0-8.0 1500 1600 200 -4 Very good resistance to hydrolysis, good adhesion to polyolefins, high solids content, good stirring stability, soft handle, good lightfastness
Impranil® DLS PES 50 ≤70 6.5-8.5 4350 1000 360 -49 High flexibility, suitable for mechanical foaming, good lightfastness
Impranil® DLU PC/PEth 60 ≤90 7.0-9.0 3600 900 360 -67 Outstanding resistance to hydrolysis, excellent mechanical foaming, crosslinkable, high scratch and crack resistance, good lightfastness and adhesion properties to certain types of PVC
Impranil® DLV/1 PC/PEth 40 10-40 5.5-7.5 3600 1200 300 -47 Outstanding resistance to hydrolysis, crosslinkable, high scratch resistance, soft, good lightfastness, suitable for mechanical foaming
Impranil® LP RSC 3040 PES/PUR 40 10-50 6.0-8.0 5800 900 290 -54 High flexibility and alcohol resistance, good lightfastness
* TSCA pending
18 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Dispercoll® U PUR Dispersions for Adhesive and Sealant Applications
Product pHSolids wt.
%Visc.
mPa•s
Tensile Strength
(psi)
Elongation at break
(%)
100% Modulus
(psi)
High Initial Heat
ActivityPeel
Strength Applications Features/Benefits
Dispercoll® U 42 6.0-9.0 50 150 - 800
500 740 200 Amorphous polyurethane suitable for use in flexible packaging, wet-bonding of textile substrates, adhesive for furniture, automotive, shoe and construction industries
Outstanding bonding properties on most synthetic and natural materials
Dispercoll® U 53 6.0-9.0 40 50 - 600
5600 710 1200 x x Crystalline polyurethane raw material for the formulation of heat-activated adhesives for use in the furniture, automotive, footwear and construction industries, well suited for applications on PVC substrates
Outstanding bonding properties on most synthetic and natural materials
Dispercoll® U 54 6.0-9.0 50 40 - 600
5600 820 1100 x x Crystalline polyurethane raw material for the formulation of heat-activated adhesives for use in furniture, automotive, footwear and construction industries, well suited for applications on PVC substrates
Outstanding bonding properties on most synthetic and natural materials
Dispercoll® U 56 6.0-9.0 50 50 - 900
4100 860 1100 x Crystalline polyurethane especially suitable for applications with low heat activation temperatures in the furniture, automotive, shoe and construction industries
Outstanding bonding properties on most synthetic and natural materials
Dispercoll® U 8755 6.0-9.0 45 <1000 3400 570 1300 x Crystalline polyurethane used in the furniture, automotive, footwear and construction industries, especially suitable for heat activations above 80°C
Outstanding bonding properties on most synthetic and natural materials, high heat resistance even when used without a crosslinker
Dispercoll® U XP 2643 6.0-9.0 40 <1000 500 1100 200 Amorphous polyurethane suitable for use in flexible packaging applications, automotive, footwear and construction industries, suitable for bonding at RT and applications at low heat activation temperatures
Outstanding bonding properties on most synthetic and natural materials
X – low heat activation temperature X – high initial peel strength
Dispercoll® C Polychoroprene Aqueous Dispersions for Adhesive Applications
ProductVisc.
mPa•sSolids wt. %
pH (approx) Crystallization
Gel Content Applications Features/Benefits
Dispercoll® C 2325 100 55 12 high low Aqueous adhesives, water-based contact “cements” and laminating adhesives for the automotive industry, mattresses and seating assembly
Improved pH stability, contains hydroxyl functionality for crosslinking
Dispercoll® C 74 100 58 13 medium medium Furniture, automotive, footwear, mattresses and construction industries
Provides good heat resistance and long open time
Dispercoll® C 84 100 55 13 high low Water based contact “cements” and laminating adhesives for the automotive, construction and furniture industries
Fast development of high strength bonds
Dispercoll® C VP LS 2372/1
100 58 13 low low Automotive, furniture, mattress, footwear and construction industries
Adhesives with a long open time, outstanding adhesion to non-polar substrates
Dispercoll® C XP 2694 <30 29 11 high high Suitable for the formulation of waterborne adhesives for the shoe, construction, furniture, mattress and automotive industries.
Good storage stability, high green strength and good spray application properties
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
19
Dispercoll® S Nano-Silica Additives for Dispercoll® C
Product Solids wt. %Particle Size, (nm) (typical)
Specific Surface, (m²/g)
(typical) pH Features/Benefits
Dispercoll® S 3030 30 9 300 10 Small particle size, moisture and heat resistance, provides thickening effect when compounded with ZnO, and delivers significant improvements in bond strength
Dispercoll® S 4020 40 15 200 10 Small particle size, delivers significant improvements in bond strength and heat resistance, improved moisture resistance, provides thickening effect when compounded with ZnO
Dispercoll® S 4510 45 30 100 10 Larger particle size, produces moderate improvements in bond strength and heat resistance, improved moisture resistance, thickening effect with ZnO is less pronounced
Dispercoll® S 5005 50 55 50 9 Larger particle size, produces moderate improvements in bond strength and heat resistance, can be used at higher loading levels due to relatively high solids content, thickening effect with ZnO is less pronounced
Pergut® Chlorinated Rubber (Supplied as Fine Powder)
Product
Visc. mPa•s 18.5% in Toluene Applications Features/Benefits
Pergut® S 5 3.5-6.5 Used to formulate fast-drying anticorrosion coatings Good weather stability and resistance to water and chemicals
Pergut® S 10 9-13 Used to formulate fast-drying anticorrosion coatings Good weather stability and resistance to water and chemicals
Pergut® S 20 16-24 Used to formulate fast-drying anticorrosion coatings as well as abbrasion-resistant concrete floor coatings and roadmarking paints
Good weather stability and resistance to water and chemicals
Pergut® S 40 33-51 Used to formulate fast-drying anticorrosion coatings Improves drying properties and resistance to inorganic acids, good weather stability and resistance to water and chemicals
Pergut® S 90 74-110 Used to formulate fast-drying swimming pool and concrete coatings
Good weather stability and resistance to water and chemicals
Pergut® S 130 120-180 Especially suitable for the formulation of primers or adhesives for rubber-to-metal bonds
High polarity
Pergut® S 170 130-200 Especially suitable for the formulation of primers or adhesives for rubber-to-metal bonds
High polarity
Pergut B 10 8-10 Used to formulate fast-drying anticorrosion coatings Good weather stability and resistance to water and chemicals
Pergut B 20 16-24 Binder of anticorrosion coatings, used to formulate fast-drying anticorrosion coatings
Good weather stability and resistance to water and chemicals
20 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Hydroxyl-Functional Polyurethanes for Adhesives (Supplied as Granules)
Product NameVisc. mPa•s 15% in MEK
Min. Activation Temp. ˚C
Crystallization Time (approx) Features/Benefits
Desmocoll® 140 60-120 45 48h Medium crystallizing, laminating applications, use with crosslinker
Desmocoll® 176 400-800 45 48h Medium crystallizing, general applications, use with crosslinker
Desmocoll® 400/1Desmocoll® 400/2Desmocoll® 400/3
400-800800-1200
1200-2300
505050
30 min.30 min.30 min.
Excellent PVC adhesion, high crystallization rate
Desmocoll® 406 400-800 50 72h Excellent PVC adhesion, low initial strength, low crystallization, long tack life especially when compared to Desmocoll 400
Desmocoll® 500/1Desmocoll® 500/2
50-400400-800
5050
5 min.5 min.
Excellent adhesion to PVC and rubber, extremely high crystallizationrate, for two-component adhesives
Desmocoll® 526 400-800 50 48h Excellent PVC adhesion, long tack life, low thermal plasticity, higher initial strength than Desmocoll 406
Desmocoll® 530/1Desmocoll® 530/2Desmocoll® 530/3
380-10001000-14001400-2500
555555
30 min. Excellent PVC adhesion, high initial bond strength and heat resistance, high crystallization rate, very low thermal plasticity
Desmocoll® 540/1Desmocoll® 540/2Desmocoll® 540/3Desmocoll® 540/4Desmocoll® 540/5
100-500 500-1000
1000-15001500-21002100-3600
6060606060
10 min.10 min.10 min.10 min.10 min.
Extremely high crystallization, excellent PVC adhesion, high initial bond strength and high heat resistance, high green strength, very low plasticity
Desmocoll® 621/1Desmocoll® 621/2
1500-2100 2100-3100
5555
2h2h
Good PVC adhesion, long tack life after thermal activation, high crystallization, low thermalplasticity
Desmocoll® XP 2597/2Desmocoll® XP 2597/3Desmocoll® XP 2597/4Desmocoll® XP 2597/5
500-10001000-15001500-22002200-3100
45454545
50 min.50 min.50 min.50 min.
High rate crystallization, very good adhesion with a longer tack life than Desmocoll® 500 grades, low thermal plasticity
Desmomelt® Hydroxyl-Functional Polyurethanes for Adhesives
Product Name Form SuppliedVisc. mPa•s 15% in MEK
Min. Activation Temp. ˚C
Crystallization Time Features/Benefits
Desmomelt® 540/1 Granules 100-500 60 10 min. High initial bond strength and good thermal stability
Desmomelt® 540/3 Granules 1500-2200 60 10 min. High initial bond strength and good thermal stability
Desmomelt® VP KA 8702 Powder 100-300 50 10 min. Very high rate of crystallization and very low thermoplasticity, very good adhesion on textile substrates, rubber, wood, PUR elastomers, AL foils and plastic films (ABS/PVC); allows the economic production of industrial textiles as well as footwear and leather goods
Polycarbonate Diols
Product NameEquiv.
wt.Typical OH # mg
KOH/gViscosity
mPa•s Applications Features/Benefits
Desmophen® C 1100 515 109 1900-4500 Coatings or sealants for both interior and exterior applications
Used for high-grade building blocks in PUR systems with very good weatherability, lightfastness, hydrolytic stability and elasticity
Desmophen® C 1200 1000 56 14,000-19,000
Suitable for decorative coatings, sealing compounds and joint sealants
Used for binder for high-grade flexible coatings and sealers. Charterized by good weather stability and resistance to hydrolysis
Desmophen® C 2100 500 112 300-520 Both interior and exterior applications Solvent free and waxy at room temperature. Very good weatherability, lightfastness, hydrolytic stability and elasticity
Desmophen® C 2200 1000 56 1550-3050 Both interior and exterior applications Used for high-grade building blocks in PUR systems with very good weatherability, lightfastness, hydrolytic stability
Desmophen® C 3100 XP 515 109 300-700 @75˚C
High grade building block for the formulation of PU systems, both interior and exterior applications
Very good weatherability, lightfastness, hydrolytic stability and elasticity
Desmophen® C 3200 XP 1000 56 1550-3050 @75˚C
Both interior and exterior applications Very good weatherability, lightfastness, hydrolytic stability and elasticity
Desmophen® C XP 2613 1000 56 1000-6000 @75˚C
Used as a binder for high grade flexible coatings and sealers in decorative coatings, sealing compounds and joint sealants
Characterized by good weather and hydrolytic stability
Desmophen® C XP 2716 326 172 3600-4600 Both interior and exterior applications Very good weatherability, lightfastness, hydrolytic stability and elasticity
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
21
Polyester Polyols
Products Solids % SolventVisc.
mPa•s
Equiv. Wt., avg. as
suppliedOH
Content, % Features/Benefits
Desmophen® 631 MPA 75 MPA 10000-25000
267 6.4 Lightfast and weather-stable coatings, good chemical and abrasion resistance, outstanding gloss retention
Desmophen® 650 A - 65 MPA
65 MPA 10000-20000
325 5.2 Lightfast and weather-stable coatings, well suited for uses requiring light stability and weatherability as well as good chemical and abrasion resistance; suitable substrates include metal, concrete, wood, plastics and paper
Desmophen® 670 BA 80 BA 2600-3400 485 3.5 Flexible, weather-stable coatings
Desmophen® 680 BA* 70 BA 2500-3500 770 2.2 Higher solids, clear and pigmented weatherable coatings with good gloss retention, lightfastness and chalking resistance
Desmophen® 1200 BA 60 BA 55 567 3.0 Formulate coatings for substrates such as metal, wood and various plastics
Desmophen® 1300 BA 75 BA 800-1200 530 3.2 Wood, paper and metal coatings; fast drying
Desmophen® 1300 X 75 X 3100-3800 530 3.2 Wood, paper and metal coatings; fast drying
Desmophen® R-221-75 75 MPA 3000-11000 522 3.3 Weather resistant coatings; excellent grind medium, good flexibility
Desmophen® VP LS 2089 75 BA 8000-12000 283 6.0 Pigmented aliphatic coatings with good chemical resistance, light stability, chalking resistance and gloss retention
Desmophen® XF 4910-2 80 BA/MPA 1900 400 4.3 Flexible, chemical resistant coatings
Desmophen® XP 2635 74 MPA <10000 445 3.8 Flexible coatings for metal
Desmophen® XP 7116 80 BA 6000 386 4.4 High solids, high performance coatings for metal and plastic substrates
Polyester Blends
Products Solids %
Amine Number mg
KOH/gVisc.
mPa•sEquiv. Wt., avg.
as suppliedOH Number mg KOH/g Features/Benefits
Desmophen® XP 2680 >99 185-195 800-1200
151 170-190 Excellent for uses requiring high film build, light stability and weatherability as well as good chemical and abrasion resistance; suitable substrates include metal, concrete, wood, plastics and geotextiles
*TSCA Pending
Crelan® Crosslinkers for Polyurethane Powder Coatings
Crelan® Crosslinker Chemical Description NCO % Functionality Tg (°C)
Minimum Baking Temperature
@ 15’ Features/Benefits
Crelan® EF 403 IPDI Uretdione 13.5 1.9 52 180°C No blocking agent, excellent flowout, pigment wetting and impact resistance, good weather stability and gloss properties
Crelan® NI-2 ε caprolactam blocked IPDI 15.0 2.2 60 180°C Excellent flow properties and high gloss in thin film builds, chalking resistance, outdoor weathering, provides good corrosion protection properties
Crelan® NW-5 ε caprolactam blocked H12MDI
12.7 2.3 55 175°C Higher reactivity and elasticity, excellent flow properties and high gloss, chalking resistance, outdoor weathering, provides good corrosion protection properties
Crelan® VP LS 2256 ε caprolactam blocked IPDI 15 2.5 50 180°C High chemical resistance, excellent overbake stability
22 The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
Product FunctionalityTypical OH No.
mg KOH/g
Typical Molecular
WeightVisc.
mPa•s EO Tip
AMINE-BASED POLYOLS
Multranol® 4050 4.0 630.0 360 19000 No
Multranol® 4063 4.0 460.0 490 18000 No
Multranol® 8114 4.0 395.0 570 8800 No
Multranol® 8120 4.0 360.0 620 25200 No
Multranol® 9138 3.0 700.0 240 785 No
Multranol® 9170 3.0 350.0 480 315 No
Multranol® 9181 4.0 770.0 290 36000 No
SUCROSE-BASED POLYOLS
Multranol® 4030 5.8 380.0 860 14000 No
Multranol® 4034 5.2 470.0 630 33000 No
Multranol® 4035 3.0 380.0 440 600 No
Multranol® 8162 4.3 410.0 590 3600 No
Multranol® 8164 4.6 470.0 550 10500 No
Mutranol® 9196 5.2 456.0 630 21420 Yes
SPECIALTY POLYOLS FOR COATINGS, ADHESIVES, SEALANTS AND ELASTOMERS
Arcol® LG-650 3.0 650.0 260 820 No
Arcol® LHT-112 3.0 112.0 1500 280 No
Arcol® LHT-240 3.0 238.0 710 248 No
Arcol® PPG-425 2.0 263.0 430 73 No
Arcol® PPG-725 2.0 147.0 760 120 No
Arcol® PPG-1000 2.0 111.0 1010 163 No
Multranol® 4011 3.0 550.0 310 1650 No
Multranol® 4012 3.0 370.0 450 650 No
Multranol® 9158 3.0 470.0 330 475 No
Multranol® 9198 2.0 515.0 220 55 No
Softcel® U-1000 3.0 168.0 1000 240 No
LOW-MONOL POLYOLS
Acclaim® 703 3.0 238.0 700 265 No
Acclaim® 2200 2.0 56.0 2000 342 No
Acclaim® 3300N 2.8 57.6 2730 507 No
Acclaim® 4200 2.0 28.0 4000 968 No
Acclaim® 6300 3.0 28.0 6000 1369 No
Acclaim® 8200 2.0 14.0 8000 3189 No
POLYOLS FOR ENCAPSULATION SYSTEMS
Baytec® ENC-30P 3.0 550.0 306 1650 No
Baytec® ENC-55P 3.0 370.0 450 650 No
Baytec® ENC-140P 3.0 222.0 N/A 1350 No
Baytec® ENC-340P 3.0 56.0 3000 500 No
Baytec® ENC-390P 3.0 35.0 4800 840 Yes
Product FunctionalityTypical OH No.
mg KOH/g
Typical Molecular
WeightVisc.
mPa•s EO Tip
FLEXIBLE POLYOLS
Arcol® 11-34 3.0 35.5 4800 850 Yes
Arcol® E-351 2.0 40.0 2800 520 Yes
Arcol® F-3022 3.0 56.0 3000 480 No
Arcol® F-3222 3.0 52.0 3200 520 No
Arcol® LG-56 3.0 57.0 3000 490 No
Arcol® LHT-42 3.0 41.0 4100 715 No
Arcol® PPG-2000 2.0 56.0 2000 342 No
Arcol® PPG-3025 2.0 37.0 3000 600 No
Arcol® PPG-4000 2.0 28.0 4000 980 No
Hyperlite® E-824 3.0 36.0 4700 830 Yes
Hyperlite® E-863 3.8 31.5 6870 1100 Yes
Multranol® 3900 3.0 35.0 4800 790 Yes
Multranol® 3901 3.0 28.0 6000 1160 Yes
Multranol® 9111 2.0 28.0 4000 820 Yes
Multranol® 9139 3.0 28.0 6000 1150 Yes
Multranol® 9190 2.0 28.0 4000 900 Yes
Multranol® 9199 3.0 37.0 4550 1100 Yes
Softcel® VE-1100 2.4 120.0 1120 285 Yes
Ultracel® 3000 6.0 30.0 11220 1700 Yes
POLYMER POLYOLS
Arcol® 24-32 2.0 32.0 3510 1220 Yes
Arcol® 31-28 3.0 28.0 6010 3000 Yes
Arcol® 34-28 3.0 27.5 6120 2240 Yes
Arcol® 34-35 3.0 47.2 3570 1267 No
Arcol® E-900 3.0 25.4 6630 2476 Yes
Arcol® HS-100 3.0 28.2 5970 3100 No
Hyperlite® E-852 3.0 20.2 N/A 5200 Yes
Multranol® 8151 3.0 28.0 6010 3600 Yes
Polyether Polyols
The product data listed is provided as general information only. They are approximate values and are not considered part of the product specifications.Note: Viscosity in mPa•s is 23˚C or 25˚C unless otherwise noted.
©2015 Covestro LLC. All rights reserved COV-037 10/2015
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance, information and recommendations to determine to your own satisfaction whether our products, technical assistance and information are suitable for your intended uses and applications. This application specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by Covestro.
Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent.
Acclaim®, Arcol®, Baybond®, Bayhydrol®, Bayhydur®, Baytec®, Crelan®, Desmocap®, Desmocoll®, Desmodur®, Desmomelt®, Desmophen®, Desmoseal®, Dispercoll®, Hyperlite®, Imprafix®, Impranil® Mondur®, Multranol®, Pergut®, and Softcel®, are registered trademarks of Covestro.www.coatings.covestro.com
Covestro LLC 1 Covestro Circle Pittsburgh, PA 15205 USA 412-413-3983