inventor hsm 2015 help_ cam mania tutorial (28)

11/10/2014 Help: CAM Mania Tutorial

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-1C16B874-A8B0-419D-B294-1B1EF72D23A4 1/4

In this tutorial, you will continue to practice the skills you learned in Tutorial 1 and Tutorial 2 to machine the part shown above using thefollowing operations:

Creating a SetupFacing2D Adaptive Clearing2D Pocketing2D ContouringChamferingCountersinkingDrillingTappingSimulating and Post Processing the toolpaths

Before proceeding, please open the part CAM Mania Tutorial.ipt in Inventor HSM.

Note: The files used in these tutorials, as well as other sample datasets, can be found in the C:\Users\Public\Documents\Autodesk\InventorHSM 2015\Examples subfolder.

Topics in this sectionTo Create the Setup (CAM Mania)To Face the StockTo Rough Out the Three PocketsTo Finish Cut the Three PocketsTo Rough Cut the Outside of the PartTo Finish the Outside of the PartTo Machine the ChamfersTo Machine the Countersinks (CAM Mania)To Drill the Four HolesTo Tap the Four HolesTo Simulate and Post Process the Toolpaths

Parent topic: Tutorials

CAM Mania Tutorial

Was this Article Helpful?

Please help us improve the content on this site. Was this article helpful? Yes No

SHARELIKE (0)