inventor hsm 2015 help_ to create a tool library (45)

The next step in the tutorial is to create a tool library containing all the tools to be used in the exercise. Start by opening the tool library. 1. On the ribbon, click CAM tab Manage panel Tool Library . Note: The tool library allows you to select from existing tools in a library as well as define new tools. Tool definitions can be saved in a library or just for the part you work on. Next, create a new library called Tutorial4. 2. In the tool library dialog, select My Libraries. 3. Click . 4. Name the new library Tutorial4 and press Enter to accept the new name. Note: This creates a new library file in the My Libraries subfolder of your My Documents folder. You can locate the library file by right- clicking on the library name and selecting Open in Windows Explorer from the pop-up context menu. 5. Now, add each of the following tools by clicking and then changing the type and the parameters specified below. The Number parameter is found on the General tab. The Type, Diameter, Corner radius, Flute length, and Body length parameters are found on the Cutter tab. The Spindle speed and Cutting feedrate settings are on the Feed & Speed tab. All other parameters should be left at their defaults. Number Type Diameter (mm) Corner radius (mm) Flute length (mm) Body length (mm) Spindle speed (rpm) Cutting feedrate (mm/min) 10 Bull-nose Mill 20 1 25 default 16,000 9,500 13 Bull-nose Mill 6 1 default 45 30,000 6,000 20 Ball Mill 10 n/a default default 30,000 1,800 21 Ball Mill 6 n/a 15 45 30,000 6,000 6. When you are done setting up the tools, click to return to Inventor HSM. The new tool library is saved automatically. Continue to To Rough Using Adaptive Clearing... Parent topic: Tutorial 4 - High-Speed 3D Machining To Create a Tool Library Was this Article Helpful? Please help us improve the content on this site. Was this article helpful? Yes No SHARE LIKE (0)

Upload: miguel-angel-munguia-flores

Post on 21-Nov-2015

22 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

DESCRIPTION

hsm

TRANSCRIPT

11/10/2014 Help: To Create a Tool Library

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-80BE9912-ED04-4D74-87BF-59AD0A2DB647 1/4

The next step in the tutorial is to create a tool library containing all the tools to be used in the exercise. Start by opening the tool library.

1. On the ribbon, click CAM tab Manage panel Tool Library .

Note: The tool library allows you to select from existing tools in a library as well as define new tools. Tool definitions can be saved in alibrary or just for the part you work on.Next, create a new library called Tutorial4.

2. In the tool library dialog, select My Libraries.

3. Click .

4. Name the new library Tutorial4 and press Enter to accept the new name.

Note: This creates a new library file in the My Libraries subfolder of your My Documents folder. You can locate the library file by right-clicking on the library name and selecting Open in Windows Explorer from the pop-up context menu.

5. Now, add each of the following tools by clicking and then changing the type and the parameters specified below. TheNumber parameter is found on the General tab. The Type, Diameter, Corner radius, Flute length, and Body length parameters arefound on the Cutter tab. The Spindle speed and Cutting feedrate settings are on the Feed & Speed tab. All other parameters should beleft at their defaults.

Number Type Diameter(mm)

Corner radius(mm)

Flute length(mm)

Body length(mm)

Spindle speed(rpm)

Cutting feedrate(mm/min)

10 Bull-noseMill

20 1 25 default 16,000 9,500

13 Bull-noseMill

6 1 default 45 30,000 6,000

20 Ball Mill 10 n/a default default 30,000 1,800

21 Ball Mill 6 n/a 15 45 30,000 6,000

6. When you are done setting up the tools, click to return to Inventor HSM. The new tool library is saved automatically.

Continue to To Rough Using Adaptive Clearing...

Parent topic: Tutorial 4 - High-Speed 3D Machining

To Create a Tool Library

Was this Article Helpful?

Please help us improve the content on this site. Was this article helpful? Yes No

SHARELIKE (0)
11/10/2014 Help: To Create a Tool Library

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-80BE9912-ED04-4D74-87BF-59AD0A2DB647 2/4
11/10/2014 Help: To Create a Tool Library

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-80BE9912-ED04-4D74-87BF-59AD0A2DB647 3/4
11/10/2014 Help: To Create a Tool Library

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-80BE9912-ED04-4D74-87BF-59AD0A2DB647 4/4