11/10/2014 Help: To Face the Stock

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-2EB8CFF2-5FAB-4206-9941-8519AA890323 1/4

Perform a facing operation to clear the top face of the stock and ensure that it is completely flat.

1. On the ribbon, click CAM tab 2D Milling panel Face .

Tool tab

1. Click to open the Tool Library.

2. From the CAM Mania Tutorial library, select #2 - 3/4" flat.

3. Click to close the Tool Library dialog.

4. Expand the Feed & Speed group and change Lead-in feedrate to: 40 in/min

5. Change Ramp feedrate to: 13.3333 in/min

6. Change Plunge feedrate to: 13.3333 in/min

Start the Calculation

1. Click at the bottom of the Operation dialog box, or right-click in the graphics window and select OK from the marking menu,to automatically start calculating the toolpath.

The toolpath is now calculated and a preview appears in the graphics window.

Continue to To Rough Out the Three Pockets...

Parent topic: CAM Mania Tutorial

To Face the Stock

Was this Article Helpful?

Please help us improve the content on this site. Was this article helpful? Yes No

SHARELIKE (0)

11/10/2014 Help: To Face the Stock

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-2EB8CFF2-5FAB-4206-9941-8519AA890323 2/4

11/10/2014 Help: To Face the Stock

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-2EB8CFF2-5FAB-4206-9941-8519AA890323 3/4

11/10/2014 Help: To Face the Stock

http://help.autodesk.com/view/INVHSM/2015/ENU/?guid=GUID-2EB8CFF2-5FAB-4206-9941-8519AA890323 4/4