inventorycontrol sdk - wasp barcode...

InventoryControl SDK

Copyright © 2012 Wasp Barcode Technologies 1400 10th St. Plano, TX 75074 All Rights Reserved

STATEMENTS IN THIS DOCUMENT REGARDING THIRD PARTY PRODUCTS OR SERVICES ARE BASED ON INFORMATION MADE AVAILABLE BY THIRD PARTIES. WASP BARCODE TECHNOLOGIES AND ITS AFFILIATES ARE NOT THE SOURCE OF SUCH INFORMATION. THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

Wasp Barcode Technologies, the Wasp logo and Wasp InventoryControl SDK are registered trademarks and/or trademarks of Wasp Barcode Technologies in the United States and other countries. Other parties’ trademarks are the property of their respective owners. Software activation system licensed under Patent No. 5,490,216

Terms, conditions, features, hours and contact information in this document are subject to change without notice. Wasp is committed to providing great products and exceptional customer service. Occasionally we may decide to update our selection and change our service offerings so please check www.waspbarcode.com for the latest information.

Wasp InventoryControl SDK Install Key ________________________ (Printed on shipped material)

Wasp InventoryControl SDK Registration Key ________________________ (Obtained from http://www.waspbarcode.com/Register/default.asp)

http://www.waspbarcode.com/http://www.waspbarcode.com/Register/default.asp

Table of Contents Chapter 1: Introduction to the Wasp InventoryControl SDK ....................................................................................................................... 1

1.1 Overview .......................................................................................................................................................................................... 1

1.2 Technical Data.................................................................................................................................................................................. 1

Chapter 2: Getting Started.......................................................................................................................................................................... 2

2.1 Getting Started FAQ ......................................................................................................................................................................... 2

2.2 Communicating with InventoryControl .............................................................................................................................................. 3

2.2.1 Relationship Diagram ................................................................................................................................................................ 3

2.2.2 Establishing a connection with the Wasp_Inventory_Windows_Service ................................................................................... 4

Chapter 3: Requests................................................................................................................................................................................... 5

3.1 Building Requests............................................................................................................................................................................. 5

3.1.1 Overview ................................................................................................................................................................................... 5

3.1.2 Connecting to the Service ......................................................................................................................................................... 5

3.2 Update Requests .............................................................................................................................................................................. 6

3.2.1 Example Update Request .......................................................................................................................................................... 6

3.2.2 Specific Functions Available ...................................................................................................................................................... 7

3.3 Delete Requests ............................................................................................................................................................................... 8

3.3.1 Example Delete Request ........................................................................................................................................................... 8

3.3.2 Specific Functions Available ...................................................................................................................................................... 8

3.4 Get Requests ................................................................................................................................................................................... 9

3.4.1 Example Get Request ............................................................................................................................................................... 9

3.4.2 Available Data ......................................................................................................................................................................... 10

3.5 Perform Transaction Requests ....................................................................................................................................................... 11

3.5.1 Example Perform Transaction Request ................................................................................................................................... 11

3.5.2 Specific Transactions Available ............................................................................................................................................... 12

Chapter 4: Handling Responses ............................................................................................................................................................... 13

Chapter 5: Using the Sample Application ................................................................................................................................................. 15

5.1 Sample Application Overview ......................................................................................................................................................... 15

5.2 Running the Sample Application for the First Time..................................................................................................................... 16

5.3 Running Use Cases.................................................................................................................................................................... 18

5.4 Use Cases ..................................................................................................................................................................................... 21

5.4.1 Use Case Overview ................................................................................................................................................................. 21

5.4.2 Use Case 1: Transactions ....................................................................................................................................................... 22

5.4.3 Use Case 2: Purchase Order & Do a Full Receive .................................................................................................................. 23

5.4.4 Use Case 3: Purchase Order & Do a Partial Receive.............................................................................................................. 24

5.4.5 Use Case 4: Purchase Order and Add Line Items ................................................................................................................... 25

5.4.6 Use Case 5: Pick Order & Pick ................................................................................................................................................ 26

5.4.7 Use Case 6: Get List of Data ................................................................................................................................................... 27

5.4.8 Use Case 7: Audit.................................................................................................................................................................... 28

5.4.9 Use Case 8: Update Company Information ............................................................................................................................. 29

5.4.10 Use Case 9: Errors ................................................................................................................................................................ 30

Appendix A - Functions in the SDK DLL ................................................................................................................................................... 31

Index......................................................................................................................................................................................................... 41

1

Wasp InventoryControl SDK Manual

Chapter 1: Introduction to the Wasp InventoryControl SDK

1.1 Overview

The Wasp SDK (software development kit) provides you with the means to create a custom application that shares data with your Wasp Database using standard (should this be "our" or maybe "our proprietary") functions and calls via the Wasp Service. This enables you to create applications to manipulate your data in ways not available in the InventoryControl application. All of the changes made to your data will be updated in real time to your Wasp Database. The Wasp SDK allows you to create applications that enhance the InventoryControl functionality and customize it for your industry. Utilizing the SDK gives you broad customization options without the cost and effort of creating a stand-alone application that would require the re-entry of the data already contained in InventoryControl.

1.2 Technical Data

Wasp InventoryControl SDK version 1.0. Copyright 2012 Wasp Barcode Technologies. InventoryControl is a registered trademark of Wasp Barcode Technologies. All other trademarks are the property of their respective owners and should be treated as such.

2


Chapter 2: Getting Started

2.1 Getting Started FAQ

What is included in the Wasp InventoryControl SDK? You will receive a patch to upgrade InventoryControl 6.x or later to the latest version and the Wasp InventoryControl SDK installer.

What InventoryControl Functions are not available through the SDK? At this time the following functions are not available in the SDK:

• Assemble • Disassemble • Add or Update User Security • Reconcile Audit • End Audit

Does the SDK need to be installed on the same machine as the Wasp Inventory Windows Service?

No. It can be installed on any machine, and can even be installed on a Virtual Machine. The only requirement is that the system must have network access to the machine running the Wasp Inventory Windows Service.

What programming code should I use to access the Wasp Inventory Windows Service? Any programming language can be used to access the interface. The SDK package includes sample code in C# using Visual Studio .NET; however, developers are free to use any language and toolkit that they choose. Keep in mind the Wasp will test the Sample Application, but will not debug custom applications you develop.

Can I use the Wasp sample code in my own programs? You are free to create your own applications using the sample code, but Wasp Barcode Technologies does not support the sample code and makes it available on an "as-is" basis.

3


2.2 Communicating with InventoryControl

2.2.1 Relationship Diagram

The diagram below illustrates the relationship between the SDK and the other InventoryControl components.

4


2.2.2 Establishing a connection with the Wasp_Inventory_Windows_Service

You will communicate with InventoryControl by creating a connection to the Wasp_Inventory_Windows_Service. Any functions you call from your application will go through the Wasp_Inventory_Windows_Service to the InventoryControl Database. In order to establish a connection with the Wasp_Inventory_Windows_Service, you must have installed the SDK on a machine that has network access to the service. Below is an example of the code to connect to the Wasp_Inventory_Windows_Service. WaspServiceRequest initReq; ServiceRequestResult ret; ConnectToHost(out initReq, out ret); if (ret.ServiceCallReturnVal) { // successfully connected } else { // connection failed. Check error } private void ConnectToHost(out WaspServiceRequest initReq, out ServiceRequestResult ret) { initReq = new WaspServiceRequest(); initReq.WaspServiceUrl = txtConnectionAddress.Text; // URL of the InventoryControl service, i.e. http://localhost:10005/WaspInventoryService/WindowsService initReq.LogLevel = WaspServiceRequest.WaspLogLevels.VERBOSE; initReq.WaspSdkLicenseKey = txtLicense.Text; // activated SDK license key, it starts with 0778- initReq.LoginUsername = txtUsername.Text; // Valid InventoryControl user name initReq.LoginPassword = txtPassword.Text; ret = initReq.ConnectToService(); }

http://localhost:10005/WaspInventoryService/WindowsService

5


Chapter 3: Requests

3.1 Building Requests

3.1.1 Overview

A Request is the query you are making to the database via the Wasp_Inventory_Windows_Service, either to retrieve data or perform some action on the data. There are four types of requests you can make:

• Update Requests - These requests create new data or update existing data. • Delete Requests - Delete existing data. Keep in mind that, as in InventoryControl, when you

delete data, you are not removing it permanently from the database. Deleted data is retained, but does not appear in lists or reports and does not affect inventory totals.

• Get Requests - Get requests retrieve data stored in the database tables • Perform Transaction Requests - These requests call functions that perform a transaction on

data such as Move, Remove, Add, etc.

3.1.2 Connecting to the Service

Prior to requesting information from the database, you must create a connection to the Wasp Inventory Service. See the topic Communicating with InventoryControl for details on creating a connection to the service.

6


3.2 Update Requests

Update requests create new or update existing data. To view how an update request works in conjunction with other functions, and to copy source code, please see the Sample App. You can view detailed instructions for running Use Cases in the Sample App in the topic Using the Sample Applications. Example Update Request Specific Functions Available

3.2.1 Example Update Request

This example creates a new item. Note: The order of data in the data dictionary does not matter. private Dictionary UpdateItemData(string number) { Dictionary dictItem = new Dictionary(); dictItem.Add("item_number", number); //dictItem.Add("item_number", "auto_generated"); // if you want item number to be auto generated dictItem.Add("item_type_name", "Inventory"); dictItem.Add("alt_item_number", "alt_no_1"); dictItem.Add("category", "monitor"); dictItem.Add("checkout_duration", "100"); dictItem.Add("cost", "199.99"); dictItem.Add("auto_sn", ""); dictItem.Add("auto_sn_value", ""); dictItem.Add("cost_method", "FIFO"); dictItem.Add("description", "this is my description for item 1"); dictItem.Add("dimension_unit", "Inches"); dictItem.Add("height", "15"); dictItem.Add("length", "20"); dictItem.Add("linked_file", ""); dictItem.Add("list_price", "300"); dictItem.Add("manager", "Smith"); dictItem.Add("manufacturer", ""); dictItem.Add("max_stock_level", "5"); dictItem.Add("min_stock_level", "0"); dictItem.Add("note_text", "Item Note"); dictItem.Add("reorder_qty", "5"); dictItem.Add("sale_price", "250"); dictItem.Add("supplier", ""); dictItem.Add("supplier_number", ""); dictItem.Add("require_customers", "false"); dictItem.Add("track_date_codes", "false"); dictItem.Add("track_lots", "true"); dictItem.Add("track_pallets", "true"); dictItem.Add("require_pos", "false"); dictItem.Add("track_serial_numbers", "false");

7


dictItem.Add("require_suppliers", "false"); dictItem.Add("unit_of_measure", "each"); dictItem.Add("weight", "20"); dictItem.Add("weight_unit", "pounds"); dictItem.Add("width", "3"); dictItem.Add("external_key", "0"); dictItem.Add("usrdefdate1", "4/15/1963"); dictItem.Add("usrdefdate2", "8/20/1992"); dictItem.Add("usrdefnumber1", "10"); dictItem.Add("usrdeftext1", "USPS"); dictItem.Add("usrdeftext2", "American Eagle One Ounce Gold Proof "); return dictItem; }

3.2.2 Specific Functions Available

List of specific functions

• UpdateItem • UpdateCustom* • UpdateSupplier* • UpdatePurchaseOrder • UpdatePickOrder • UpdateSite • UpdateLocation* • UpdateManufacturer* • UpdateItemSupplierSettings • UpdateItemLocationSettings • UpdateShippingMethod • UpdatePaymentMethod • UpdatePriceLevel • UpdateSalesTax • UpdateCompanyInfo*

* Indicates this function is multi-tiered to accommodate multiple addresses or other layered data.

8


3.3 Delete Requests

Delete requests delete existing data. Keep in mind that, as in InventoryControl, when you delete data you are not removing it permanently from the database. Deleted data is retained, but does not appear in lists or reports and does not affect inventory totals. To view how a delete request works in conjunction with other functions, and to copy source code, please see the Sample App. You can view detailed instructions for running Use Cases in the Sample App in the topic Using the Sample Application. Example Delete Request Specific Functions Available

3.3.1 Example Delete Request

The code example below deletes item uc1_1010. ServiceRequestResult ret = null; ret = m_connector.DeleteItem("uc1_1010", true);

3.3.2 Specific Functions Available

• DeleteItem • DeleteCustomer • DeleteSupplier • DeletePurchaseOrder • DeletePickOrder • DeleteSite • DeleteLocation • DeleteManufacturer • DeleteItemSupplier • DeleteItemLocation • DeleteShippingMethod • DeletePaymentMethod • DeletePriceLevel • DeleteSalesTax

9


3.4 Get Requests

Getting Information requests encompass all calls to retrieve information contained in the InventoryControl database. No data is changed in the database using Get requests. To view how a Get request works, and to copy source code, please see the Sample App. You can view detailed instructions for running Use Cases in the Sample App in the topic Using the Sample Application. Example Get Request Available Data

3.4.1 Example Get Request

The code snippet below requests all new Pick Orders. ServiceRequestResult ret = null; QueryWhereCriteria[] commands = new QueryWhereCriteria[1]; Dictionary[] data = null; Dictionary[][] details = null; commands = SpecifyCriteriaForPickOrderData(); ret = m_connector.GetPickOrder(commands, out data, out details); private QueryWhereCriteria[] SpecifyCriteriaForPickOrderData() {

QueryWhereCriteria[] list = new QueryWhereCriteria[1]; list[0] = new QueryWhereCriteria("po_status", "=", "New");

return list; }

10


3.4.2 Available Data

The available tables from which you can extract data are:

• Item • Addresses

• Customer • Attachments

• Supplier • Price Level

• Purchase Order • Sales Tax

• Pick Order • Shipping Method

• Transactions • Payment Method

• Site • Item Supplier Settings

• Location • Item Location Settings

• Manufacturer • Item UOMs (Unit of Measure)

• User Security Privileges • Form Labels

• Next Serial Number

11


3.5 Perform Transaction Requests

Transaction requests perform some action on the data, such as adding inventory, checking an item in or out or closing a purchase order. To view how a Perform Transaction request works, and to copy source code, please see the Sample App. You can view detailed instructions for running Use Cases in the Sample App in the topic Using the Sample Application. Example Perform Transaction Request Specific Transactions Available

3.5.1 Example Perform Transaction Request

The code below adds a quantity of 5 to item uc5_1010. Note: If you provide a serial number as a Trackby field, make sure the Quantity is set to 1. If the quantity is other than 1, the call will fail. ServiceRequestResult ret = null; Dictionary dictData; dictData = GetAddTranxData("uc1_1010","uc1_s1", "uc1_loc1", "uc1_c1"); ret = m_connector.PerformAdd(dictData); private Dictionary GetAddTranxData(string number, string site, string location, string customer) { Dictionary dictData = new Dictionary(); // fields needed for add dictData.Add("item_number", number); dictData.Add("site_name", site); dictData.Add("location", location); dictData.Add("lot", "1"); dictData.Add("date_code", ""); dictData.Add("serial_number", ""); dictData.Add("pallet", "1"); dictData.Add("po", ""); dictData.Add("supplier", ""); dictData.Add("customer_number", customer); dictData.Add("quantity", "5"); dictData.Add("print_label_no", ""); dictData.Add("cost", "5"); dictData.Add("date_acquired", "10/1/2011"); dictData.Add("record_source", "sdk_inf150"); dictData.Add("printer_name", ""); return dictData;

12


3.5.2 Specific Transactions Available

• PerformAdd • PerformRemove • PerformMove • PerformCheck In • PerformCheck Out • PerformAdjust • PerformReceive • PerformPick • PerformStart Audit • PerformReconcile Audit • PerformEnd Audit • PerformIsPOComplete • PerformClosePurchaseOrder • PerformIsPickOrderComplete • PerformClosePickOrder

13


Chapter 4: Handling Responses

Responses to requests your application makes to InventoryControl are handled in one of two ways. Either an action is performed on the data (such as UpdateItem, UpdateLocation, UpdateSite, etc.) or data is retrieved in list form but not altered (Get requests). ErrorCode, if applicable, would be one of the codes in the enumeration. But there would be cases that there is no error code returned. An error message will ALWAYS be populated and returned with meaningful information. If you receive an ErrorCode, check the StackTrace as it may provide detailed error data. The Error Structure is listed below. public class WaspErrorObj { public int ErrorCode; public string ErrorMsg; public string Source; public string StackTrace; public WaspErrorObj(WaspError error) { ErrorCode = error.ErrorCode; ErrorMsg = error.ErrorDesc; Source = error.Source; StackTrace = error.StackTrace; } } public enum Errors { BadXml = 2, GeneralSyncError = 3, InvoiceMissingCustomer = 4, InvoiceCustomerNotFound = 5, InvoiceLineItemMissingItem = 6, InvoiceItemNotFound = 7, InvoiceMissingBatchNumber = 8, ItemNotAssignedToSite = 9, ObjectTypeNotSearchableByName = 10, InvoiceExists = 11, ExpenseMissingBatchNumber = 13, ExpenseVendorNotFound = 14, ExpenseMissingVendor = 15, ExpenseExists = 16, AccountMissingNumber = 17, AccountMissingName = 18, AccountMissingType = 19, InvalidAccountType = 20, ExpenseLineItemMissingAccount = 21, ExpenseLineItemInvalidAccountName = 22, ExpenseMissingRefNumber = 23, ItemPricingInfoNotFound = 24, ExpenseAPAccountInvalidId = 25,

14


ExpenseAPAccountInvalidName = 26, EmployeeMissingDepartment = 27, EmployeeMissingJobTitle = 28, EmployeeInvalidJobTitle = 29, EmployeeInvalidDepartment = 30, EmployeeMissingSSN = 31, EmployeeMissingFirstName = 32, EmployeeMissingLastName = 33, EmployeeMissingId = 34, EmployeePayCodeDoesNotExist = 35, EmployeeIncorrectPayRate = 36, EmployeeDeductionCodeDoesNotExist = 37, EmployeeIncorrectPayMultiplier = 38, EmployeeCouldNotAddPayCode = 39, PayCodeDoesNotExist = 40, EmployeeHasConflictingPayCodes = 41, EmployeeMissingBasePayCode = 42, EmployeePayCodeRequiresSUTAState = 43, EmployeeCouldNotAddDeductionCode = 44, TimeEntryMissingPayCode = 45, TimeEntryPayCodeDoesNotExist = 46, InvoiceItemInvalidPriceLevel = 47, ItemInvalidUofMSchedule = 48, ItemInvalidPriceLevel = 49, PayCodeMissingDescription = 50, PayCodeMissingCode = 51, TimeEntryMissingEmployee = 52 }

15


Chapter 5: Using the Sample Application

5.1 Sample Application Overview

The Sample Application that comes packaged with the SDK materials provides you with an easy way to see the code that handles all the available InventoryControl functions. You can view the code from the Sample Application and/or copy it to your clipboard. All of the InventoryControl requests available in the SDK are contained in the Sample Application. The requests are grouped together into Use Cases which you can run to see how the code works. For details on each Use Case, please see the topic Use Case Overview. Important: Keep in mind that the Use Cases perform actual functions, such as creating items, moving items, creating locations, updating company information, etc. If you are using the Sample App as your test application, make sure that you are NOT connecting to your live InventoryControl service, which would perform the functions on your production database. Instead, create a test service and test database and connect the Sample App to those to retain the integrity of your production database. In this chapter: Running the Sample Application for the First Time Running Use Cases Copying Source Code Error Messages

16


5.2 Running the Sample Application for the First Time

1. Run the Sample Application by clicking on the InventoryControl SDK Sample App icon in your

start menu or navigate to the install folder and click InventoryControl SDK Sample App.

The Sample App will appear:

17


2. Note that the first time you run the Sample App after installation you will not be connected to the service. The error message in the Error pane indicates "Authentication key is not valid". You can obtain an Activation Key (this is different from your Installation Key) by registering your product on the Wasp Product Registration page: http://waspbarcode.com/Register/default.asp. When you have obtained your Activation Key, enter it in the Activation License Key field..

3. After entering a valid Activation Key, you will be able to connect to your service.

a. Make sure the correct Service URL is entered. This field will pre-populate with the service URL if one was detected during installation.

b. Enter the Username and Password for your service. If you are connecting to a test installation of InventoryControl and you have not setup any passwords, the Username is Admin and the Password is blank.

c. Click the Connect button. Connected to service will appear as shown below when you have successfully connected.

You are now ready to run Use Cases in the Sample Application. After entering an Activation License Key, the Sample App will automatically connect to the service at opening.

http://waspbarcode.com/Register/default.asp

18


5.3 Running Use Cases

Every InventoryControl function available in the SDK is contained in one or more of the Use Cases. You can see how the functions work together and view code for each function by running the various Use Cases.

1. Highlight a Use Case in the Use Case pane. The functions contained in the selected Use Case appear in the window directly below the Use Case pane:

For a full list of Use Cases and their associated functions, please refer to the topic Use Cases Overview.

19


2. To run a Use Case, click the Run button. The behind-the-scenes calls for all functions will appear in the Progress pane.

3. To view the source code for any of the functions in the Progress pane click the View Code link. The source code for the function, along with instructional data, appears in the pane directly below the Progress pane.

20


4. You can copy the source code to your clipboard by clicking the Copy to Clipboard button.

5. If any errors occur during the running of a Use Case, they will appear in the Error pane. You can click on an error to see details if any are available.

21


5.4 Use Cases

5.4.1 Use Case Overview

The functions available in the InventoryControl SDK are grouped into nine Use Cases in the Sample Application. Using the Sample Application, you can run these use cases to see how the components work together and to view/copy the source code. Please note that you can copy the source code directly from the Sample App using the Copy to Clipboard button. Please see the topic Using the Sample Application for instructions. Use Case 1: Transactions Use Case 2: Purchase Order and Do a Full Receive Use Case 3: Purchase Order and Do a Partial Receive Use Case 4: Purchase Order and Add Line Items Use Case 5: Pick Order and Pick Use Case 6: Get List of Data Use Case 7: Audit Use Case 8: Update Company Information Use Case 9: Errors

22


5.4.2 Use Case 1: Transactions

The Transactions use case goes through the process of creating a new item, site, locations, customer, adding inventory, checking in/out, etc. This use case is a full cycle in that all new data that is created is subsequently deleted. To view how a request works in conjunction with other functions, and to copy source code for the individual requests, please see the Sample App. You can view detailed instructions for running the Sample App in the topic Using the Sample App. This use case performs the following functions:

SDK Function Result UpdateItem Creates a new item labeled uc1_1010. UpdateSite Creates a new site labeled us1_s1.

UpdateLocation Creates a new location labeled uc_1_loc1.

UpdateLocation Creates a new location labeled uc1_loc2.

UpdateItemLocation Creates the item location settings for uc1_1010. UpdateCustomer Creates a new customer. PerformAdd Adds inventory to item uc1_1010. PerformMove Moves inventory from loc1 to loc2. PerformCheckOut Checks out inventory to the customer. PerformCheckIn Check in inventory. PerformAdjust Adjusts inventory by count.

PerformAdjust Adjusts inventory by difference positive.

PerformAdjust Adjusts inventory by difference negative. PerformRemove Removes inventory. DeleteItem Deletes item uc1_1010. DeleteCustomer Deletes customer. DeleteLocation Deletes location uc1_loc1. DeleteLocation Deletes location us1_loc2. DeleteSite Deletes site uc1_1010.

23


5.4.3 Use Case 2: Purchase Order & Do a Full Receive

This use case runs through a cycle of creating a new item, customer, supplier, shipping method, payment method, purchase order, etc. and fully receiving/closing the purchase order. To view how a request works in conjunction with other functions, and to copy source code for the individual requests, please see the Sample App. You can view detailed instructions for running the Sample App in the topic Using the Sample App. This use case performs the following functions:

SDK Function Result

UpdateItem Creates a new item labeled uc2_1010.

UpdateCustomer Creates a new customer labeled uc2_c1.

UpdateSupplier Creates a new supplier labeled uc2_1010.

UpdateShippingMethod Creates a new shipping method labeled uc2_1010.

UpdatePaymentMethod Creates a new payment method labeled uc2_1010.

UpdateSupplier Creates the item supplier settings for uc2_1010.

UpdatePurchaseOrder Creates a new purchase order for uc2_1010. UpdateSite Creates a new site labeled uc2_s1.



PerformReceive Fully receives the purchase order uc2_1010s

IsPoClosed Checks if the purchase order uc2_1010 is complete.

PerformClosePO Closes the purchase order uc2_1010.

24


5.4.4 Use Case 3: Purchase Order & Do a Partial Receive

This use case runs through a cycle of creating a new item, customer, supplier, shipping method, payment method, purchase order, etc. and partially receiving/closing the purchase order. To view how a request works in conjunction with other functions, and to copy source code for the individual requests, please see the Sample App. You can view detailed instructions for running the Sample App in the topic Using the Sample App. This use case performs the following functions:

SDK Function Result






UpdateItemSupplier Creates the item supplier settings for uc3_1010.

UpdatePurchaseOrder Creates a new purchase order uc3_1010. UpdateSite Creates a new site labeled uc3_s1.



PerformReceive Partially receives the purchase order uc3_1010.

IsPoClosed Checks if the purchase order is complete uc3_1010.

PerformClosePO Closes the purchase order uc3_1010.

25


5.4.5 Use Case 4: Purchase Order and Add Line Items

This use case runs through a cycle of creating a new item, customer, supplier, shipping method, payment method, purchase order, and adding line items to the purchase order. To view how a request works in conjunction with other functions, and to copy source code for the individual requests, please see the Sample App. You can view detailed instructions for running the Sample App in the topic Using the Sample App. This use case performs the following functions:

SDK Function Result






UpdateItemSupplier Creates the item supplier settings for uc4_1010.

UpdatePurchaseOrder Creates a new purchase order uc4_1010.

UpdatePurchaseOrderAddLineItems Adds 14 line items to purchase order uc4_1010.

UpdatePurchaseOrderAddLineItems Adds 20 line items to purchase order uc4_1010.

DeletePurchaseOrder Deletes purchase order uc4_1010.

26


5.4.6 Use Case 5: Pick Order & Pick

This use case runs through a cycle of creating a new item, customer, supplier, shipping method, payment method, pick order, site and location and then adding and picking inventory. To view how a request works in conjunction with other functions, and to copy source code for the individual requests, please see the Sample App. You can view detailed instructions for running the Sample App in the topic Using the Sample App. This use case performs the following functions:

SDK Function Result


UpdateCustomer Creates a new customer labeled uc5_1010.




UpdateItemSupplier Creates the item supplier settings for uc5_1010. UpdatePickOrder Creates a new pick order uc5_1010. UpdateSite Creates a new site labeled uc5_s1.


UpdateLocation Creates a new location labeled uc5_loc2. PerformAdd Adds inventory to item uc5_1010.

PerformPick Fully receives the pick order uc5_1010.

IsPickOrderClosed Checks if the pick order is complete uc5_1010. PerformClosePickOrder Closes the pick order uc5_1010.

27


5.4.7 Use Case 6: Get List of Data

This use case performs a get on requested data and returns the data as a text file. To view how a request works in conjunction with other functions, and to copy source code for the individual requests, please see the Sample App. You can view detailed instructions for running the Sample App in the topic Using the Sample App. The available tables from which you can extract data are:

• Item • Addresses

• Customer • Attachments

• Supplier • Price Level

• Purchase Order • Sales Tax

• Pick Order • Shipping Method

• Transactions • Payment Method

• Site • Item Supplier Settings

• Location • Item Location Settings

• Manufacturer • Item UOMs (Unit of Measure)

28


5.4.8 Use Case 7: Audit

The Audit use case creates an item, site, location, customer, adds inventory and then starts an audit. This Use Case does not perform a reconcile or stop the audit. You will need to manually reconcile and turn the audit off from InventoryControl on the PC. If you have setup a test service and database, you should also have an install of InventoryControl pointing to that service/database. You will need to manually turn off the audit on your InventoryControl test install in order to run other use cases in the Sample Application. To view how a request works in conjunction with other functions, and to copy source code for the individual requests, please see the Sample App. You can view detailed instructions for running the Sample App in the topic Using the Sample App. This use case performs the following functions:

SDK Function Result UpdateItem Creates a new item labeled uc7_1010. UpdateSite Creates a new site labeled uc7_s1.



UpdateItemLocation Creates item location settings for uc7_1010.

UpdateCustomer Creates a new customer labeled uc7_c1. PerformAdd Adds inventory to uc7_1010. PerformStartAudit Starts Audit.

29


5.4.9 Use Case 8: Update Company Information

This use case performs the UpdateCompanyInfo request. It adds the company "Test Company" along with address information, a website address and email information. To view how a request works in conjunction with other functions, and to copy source code for the individual requests, please see the Sample App. You can view detailed instructions for running the Sample App in the topic Using the Sample App. This use case performs the following functions:

SDK Function Result

UpdateCompanyInfo Updates the company Test Company and associated website, email, address information, etc.

30


5.4.10 Use Case 9: Errors

The Errors use case produces results with errors so you can see how these errors are handled by the service. The Wasp SDK DLL and the Wasp InventoryControl service log both progresses and errors. You can find the Wasp SDK log files on your local machine’s common data folder. On a Windows 7 machine, the location is: C:\ProgramData\Wasp Barcode Technologies\WaspInventorySDK The InventoryControl service’s log can be found on the machine from which the service is running. This log is also located under the common data folder. On a Windows 7 machine, the location is: C:\ProgramData\Wasp Barcode Technologies\WaspInventoryWindowsService\6.0.0.0 This use case performs the following functions:

SDK Function Result UpdateItem Creates a new item labeled uc9_1010. UpdateSite Creates a new site labeled uc9_s1.

UpdateLocation Creates a new location labeled uc9_loc1. UpdateCustomer Creates a new customer PerformAdd Adds inventory to item uc9_1010. DeleteItem Deletes item uc9_1010. DeleteCustomer Deletes customer. DeleteLocation Deletes location uc9_loc1.

Index

31

Appendix A - Functions in the SDK DLL

public class ServiceRequestResult {

public bool ServiceCallReturnVal { get; set; } public List ErrorDetails { get; set; }

} In this topic: ConnecttoSerivce UpdateItem UpdateCustomer UpdateSupplier UpdatePurchaseOrder UpdatePurchaseOrderAddLineItems UpdatePickOrder UpdateSite UpdateLocation UpdateManufacturer UpdatePriceLevel UpdateSalesTax UpdateItemSupplier UpdateItemLocation UpdateShippingMethod UpdatePaymentMethod Transaction Requests IsPOClose/IsPickOrderClosed Get Requests UpdateCompanyInfo GetUserSecurityPrivileges GetFormlabels GetNextSerialNumber Delete Requests

32


ConnecttoService

/// /// Authenticates with InventoryControl Service and logins in with specified InventoryControl user name and password. /// Prior to calling this function, must create an instance of WaspInitializeRequest and specify all the following: /// - WaspServiceUrl /// - WaspSdkLicenseKey /// - LoginUsername /// - LoginPassword /// The following two items are optional: /// - LogLevel: defaults to log only warnings /// - LogFilePath: defaults to [Common Data Folder]\Wasp Barcode Technologies\WaspInventorySDK\WaspSDK.log /// /// a ServiceRequestResult structure with a return value of whether the call is successful or not, and error details if the call is not successful. public ServiceRequestResult ConnectToService()

UpdateItem

/// /// Create a new item or update an existing item record with provided info /// /// A dictionary of strings for item data. Each pair of data includes the key of the data field and the value. /// a ServiceRequestResult structure with a return value of whether the call is successful or not, and error details if the call is not successful. public ServiceRequestResult UpdateItem(Dictionary dictItem)

UpdateCustomer

/// /// Create a new customer or update an existing customer record with provided info /// /// contains general customer information /// contains lists of addresses for the customer /// a ServiceRequestResult structure with a return value of whether the call is successful or not, and error details if the call is not successful. public ServiceRequestResult UpdateCustomer(Dictionary dictCustomer, Dictionary[] dictAddress)

Index

33

UpdateSupplier

/// /// Create a new supplier or update an existing ssupplier record with provided info /// /// contains general information /// contains lists of addresses associated with supplier /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdateSupplier(Dictionary dictSupplier, Dictionary[] dictAddress)

UpdatePurchaseOrder

/// /// create a new or update an existing purchase order /// /// contains general purchase order information /// contains line item informationcontains line item information /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdatePurchaseOrder(Dictionary dictPurchaseOrder, Dictionary[] dictItemLineItem)

UpdatePurchaseOrderAddLineItems

/// /// add specified line items to an existing purchase order /// /// contains general purchase order information /// contains line item informationcontains line item information /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdatePurchaseOrderAddLineItems(Dictionary dictPurchaseOrder, Dictionary[] dictItemLineItem)

34


UpdatePickOrder

/// /// create a new or update an existing pick order /// /// contains general pick order information /// contains line item information /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdatePickOrder(Dictionary dictPickOrder, Dictionary[] dictItemLineItem)

UpdateSite

/// /// create a new or update an existing site record /// /// site information /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdateSite(Dictionary dictSite)

UpdateLocation

/// /// create a new or update an existing location record /// /// location data /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdateLocation(Dictionary dictLocation)

UpdateManufacturer

/// /// Create a new manufacturer or update an existing manufacturer record with provided info /// /// contains general information /// contains lists of addresses associated with manufacturer /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdateManufacturer(Dictionary dictManufacturer, Dictionary[] dictAddress)

Index

35

UpdatePriceLevel

/// /// create a new or update an existing price level /// /// /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdatePriceLevel(Dictionary dictPriceLevel)

UpdateSalesTax

/// /// create a new or update an existing sales tax record /// /// /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdateSalesTax(Dictionary dictSalesTax)

UpdateItemSupplier

/// /// create new or update existing item supplier settings along with order unit settings /// /// /// /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdateItemSupplier(Dictionary dictItem, Dictionary[] dictUOMs)

UpdateItemLocation

/// /// create new or update existing item location settings /// /// /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdateItemLocation(Dictionary dictItem)

36


UpdateShippingMethod

/// /// Create a new shipping method /// /// name of the shipping method /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdateShippingMethod(string method)

UpdatePaymentMethod

/// /// Create a new payment method /// /// /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult UpdatePaymentMethod(string method)

Transaction Requests

/// /// The following is a list of transaction requests to complete corresponding inventory transactions /// /// transaction data with location, track by information and quantity specification /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult PerformAdd(Dictionary dictTranx) public ServiceRequestResult PerformRemove(Dictionary dictTranx) public ServiceRequestResult PerformMove(Dictionary dictTranx) public ServiceRequestResult PerformAdjust(Dictionary dictTranx) public ServiceRequestResult PerformCheckIn(Dictionary dictTranx) public ServiceRequestResult PerformCheckOut(Dictionary dictTranx) public ServiceRequestResult PerformAudit(Dictionary dictTranx) public ServiceRequestResult PerformStartAudit() public ServiceRequestResult PerformEndAudit() public ServiceRequestResult PerformClosePO(Dictionary dictTranx) public ServiceRequestResult PerformClosePickOrder(Dictionary dictTranx) // the following two methods have an additional parameter bCloseIfComplete to instruct whether to close the purchase/pick order if it is fully received/picked. public ServiceRequestResult PerformReceive(Dictionary dictTranx, bool bCloseIfComplete) public ServiceRequestResult PerformPick(Dictionary dictTranx, bool bCloseIfComplete)

Index

37

IsPOClosed/IsPickOrderClosed

/// /// check to see if specified purchase order is closed /// /// specify po_number in the dictionary /// public ServiceRequestResult IsPoClosed(Dictionary dictTranx) /// /// check to see if specified pick order is closed /// /// specify order_number in the dictionary /// public ServiceRequestResult IsPickOrderClosed(Dictionary dictTranx)

38


Get Requests

/// /// The following is a list of transaction requests to retrieve a list of the subject, matching the specified criteria /// /// contains the list of criteria to get the items /// stores the data that is returned. /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. /// public ServiceRequestResult GetItem(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetCustomer(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetSupplier(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetManufacturer(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetPurchaseOrder(QueryWhereCriteria[] commands, out Dictionary[] data, out Dictionary[][] details) public ServiceRequestResult GetPickOrder(QueryWhereCriteria[] commands, out Dictionary[] data, out Dictionary[][] details) public ServiceRequestResult GetTransactions(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetInventoryDetailsList(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetSite(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetLocation(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetAddresses(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetItemUOMs(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetItemSupplier(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetItemLocation(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetSalesTax(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetPriceLevel(out Dictionary[] data) public ServiceRequestResult GetShippingMethod(QueryWhereCriteria[] commands, out Dictionary[] data) public ServiceRequestResult GetPaymentMethod(QueryWhereCriteria[] commands, out Dictionary[] data)

Index

39

UpdateCompanyInfo

/// /// Update company information, as well as the addresses info /// /// specifies the company general information /// company address info /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. /// public ServiceRequestResult UpdateCompanyInfo(Dictionary info, Dictionary[] addresses)

GetUserSercurityPrivileges

/// /// retrieve specified user's security privileges and accessible site list /// /// retrieve specified user's security privileges /// retrieve specified user's accessible site list /// specify user logon name /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. /// public ServiceRequestResult GetUserSecurityPrivileges(out Dictionary[] dataPrvileges, out Dictionary[] dataSites, string sUser)

GetFormLabels

/// /// retrieve all field labels for the specified form /// /// /// list of field labels matching the specified criteria and form name /// form name /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. /// public ServiceRequestResult GetFormLabels(QueryWhereCriteria[] commands, out Dictionary[] data, string sForm)

40


GetNextSerialNumber

/// /// Get the next serial number for the specified item, given that this item is set to automatically assign serial number /// /// serial number /// item number /// a ServiceRequestResult structure with /// - a return value of whether the call is successful or not, and /// - error details if the call is not successful. public ServiceRequestResult GetNextSerialNumber(out Dictionary[] data, string sItem)

Delete Requests

/// /// The following is a list of transaction requests to delete the specified record /// /// the number of the item to be deleted /// determines whether the user wants to delete associated data public ServiceRequestResult DeleteItem(string itemNumber, bool deleteAssociation) public ServiceRequestResult DeleteCustomer(string customerName) public ServiceRequestResult DeleteSupplier(string supplierName, bool deleteAssociation) public ServiceRequestResult DeletePurchaseOrder(string poNum) public ServiceRequestResult DeletePickOrder(string pickOrderNum) public ServiceRequestResult DeleteSite(string siteName) public ServiceRequestResult DeleteLocation(string locationName, string siteName) public ServiceRequestResult DeleteManufacturer(string manufacturerName, bool deleteAssociation) public ServiceRequestResult DeleteShippingMethod(string shippingMethod) public ServiceRequestResult DeletePaymentMethod(string paymentMethod) public ServiceRequestResult DeletePriceLevel(string sPriceLevel) public ServiceRequestResult DeleteSalesTax(string sSalesTax) public ServiceRequestResult DeleteItemSupplierSetting(string sItemNumber, string sSupplier) public ServiceRequestResult DeleteItemLocationSetting(string sItemNumber, string sSite, string sLocation)

Index

41

Index

A Add Line Items Use Case ...............................25 Appendix A .....................................................30 Audit Use Case ..............................................28

B Building Requests.............................................5

C Code - View Source Code ..............................15 Copy Source Code .........................................15 Copy to Clipboard ...........................................15

E Error Details ...................................................15 Errors - Viewing in Sample App ......................15 Errors Use Case .............................................30

F Full Receive Use Case ...................................23 Functions in SDK DLL ....................................30

G Get Addresses Use Case ...............................27 Get Attachments Use Case ............................27 Get Customer Use Case .................................27 Get Item Location Settings Use Case .............27 Get Item Supplier Settings Use Case ..............27 Get Item UOMs Use Case ..............................27 Get Item Use Case .........................................27 Get List Use Case ..........................................27 Get Location Use Case ...................................27 Get Manufacturer Use Case ...........................27 Get Payment Method Use Case......................27 Get Pick Order Use Case ...............................27 Get Price Level Use Case...............................27 Get Purchase Order Use Case .......................27 Get Requests ...................................................9 Get Sales Tax Use case .................................27 Get Shipping Method Use Case ......................27 Get Site Use Case ..........................................27

Get Supplier Use Case................................... 27 Get Transactions Use Case ........................... 27

P Partial Receive Use Case............................... 24 Perform Transaction Request ......................... 11 Pick Order Use Case ..................................... 26 Programming Notes ....................................... 30 Progress Pane ............................................... 15 Purchase Order Use Case ................. 23, 24, 25

R Running Use Cases ....................................... 15

S Sample Application ........................................ 15 SDK DLL Functions........................................ 30 Source Code .................................................. 15

T Transactions Use Case .................................. 22

U Update Company Information Use case ......... 29 Update Requests ............................................. 6 Use Case - Audit ............................................ 28 Use Case - Get List of Data............................ 27 Use Case - Pick Order and Pick ..................... 26 Use Case - Purchase Order and Add Line Items

................................................................... 25 Use Case - Purchase Order and Full Recieve 23 Use Case - Purchase Order and Partial Receive

................................................................... 24 Use Case - Transactions ................................ 22 Use Case - Update Company Information ...... 29 Use Case -Errors ........................................... 30 Use Case Overview ....................................... 21 Use Cases - Running in the Sample App ........ 15

V View Source Code ......................................... 15

Chapter 1: Introduction to the Wasp InventoryControl SDK1.1 Overview1.2 Technical Data

Chapter 2: Getting Started2.1 Getting Started FAQ2.2 Communicating with InventoryControl2.2.1 Relationship Diagram2.2.2 Establishing a connection with the Wasp_Inventory_Windows_Service

Chapter 3: Requests3.1 Building Requests3.1.1 Overview3.1.2 Connecting to the Service

3.2 Update Requests3.2.1 Example Update Request3.2.2 Specific Functions Available

3.3 Delete Requests3.3.1 Example Delete Request3.3.2 Specific Functions Available

3.4 Get Requests3.4.1 Example Get Request3.4.2 Available Data

3.5 Perform Transaction Requests3.5.1 Example Perform Transaction Request3.5.2 Specific Transactions Available

Chapter 4: Handling ResponsesChapter 5: Using the Sample Application5.1 Sample Application Overview5.2 Running the Sample Application for the First Time5.3 Running Use Cases

5.4 Use Cases5.4.1 Use Case Overview5.4.2 Use Case 1: Transactions5.4.3 Use Case 2: Purchase Order & Do a Full Receive5.4.4 Use Case 3: Purchase Order & Do a Partial Receive5.4.5 Use Case 4: Purchase Order and Add Line Items5.4.6 Use Case 5: Pick Order & Pick5.4.7 Use Case 6: Get List of Data5.4.8 Use Case 7: Audit5.4.9 Use Case 8: Update Company Information5.4.10 Use Case 9: Errors

Appendix A - Functions in the SDK DLLConnecttoServiceUpdateItemUpdateCustomerUpdateSupplierUpdatePurchaseOrderUpdatePurchaseOrderAddLineItemsUpdatePickOrderUpdateSiteUpdateLocationUpdateManufacturerUpdatePriceLevelUpdateSalesTaxUpdateItemSupplierUpdateItemLocationUpdateShippingMethodUpdatePaymentMethodTransaction RequestsIsPOClosed/IsPickOrderClosedGet RequestsUpdateCompanyInfoGetUserSercurityPrivilegesGetFormLabelsGetNextSerialNumberDelete Requests

Index

inventorycontrol sdk - wasp barcode...

Documents

WASP SUPERSTINGER, AND WASP MINI - fireworking.com · 1 WASP SUPERSTINGER, AND WASP MINI Operator’s Manual Contents Page 2 Introduction 10 Unpacking a Superstinger 12 Assembling

The Sea Wasp

‘The Wasp Factory’

Paper Wasp

Wasp Archery

This shows our InventoryControl form. It’s used to keep track ...This shows our InventoryControl form. It’s used to keep track of every item of stocking inventory. At any moment

WASP - ORE Catapult

WASP - d2ghdaxqb194v2.cloudfront.net · WASP LEVEL 1 WASP LEVEL 2 WASP LEVEL 3 WASP LEVEL 4 WASP BASE SYSTEM WASP SYSTEMS ISR payload with dual sensors, EO+LWIR 90mm Varifocal IR

WASP-South transiting exoplanets: WASP-130b, WASP-131b ... · WASP-South transiting exoplanets 3695 Table 2. System parameters for WASP-130. 1SWASP J133225.42–422831.0 2MASS 13322543–4228309

Wasp Labeler Getting Started - EMS Barcode Solutions · Wasp Labeler User Manual . 1.2 Getting Started - Wasp Labeler Capabilities . Wasp Labeler is a professional label generation

WASP Identifications.pdf

Dimming WASP Brochure

Introduction to WASP

WASP - d1io3yog0oux5.cloudfront.net · WASP LEVEL 1 WASP LEVEL 2 WASP LEVEL 3 WASP LEVEL 4 WASP BASE SYSTEM WASP SYSTEMS ISR payload with dual sensors, EO+LWIR 90mm …

WASP getting started

InventoryControl - Corporate Armor · InventoryControl The Complete Inventory Tracking Solution for Small Businesses ... Get in control of your inventory with Wasp Inventory Control

Wasp - Wasp.pdf

Killer Wasp

WASP-169, WASP-171, WASP-175 and WASP-182: three … · 2020. 9. 15. · WASP-169, WASP-171, WASP-175 and WASP-182 3 Table 2. The rst ve radial velocity measurements for WASP-169

European Paper Wasp - Extensionextension.colostate.edu/docs/pubs/insect/05611.pdfeuropean paper wasp, wasp, Polistes dominulus, yellowjacket, pest, paper wasp Created Date 6/5/2013

Wasp WRS100SBR - Wasp Barcode

Wasp Labeler Manual

Data · The Crimson idol (1992) avec WASP comme Groupe vocal et instrumental Chainsaw Charlie (1991) avec WASP comme Groupe vocal et instrumental Wasp (1989) avec WASP comme Groupe

Nimsoft Monitor wasp Guidedocs.nimsoft.com/.../Catalog/wasp/3.1/wasp-3.1.pdf · Chapter 1: wasp 3.1 7 Chapter 1: wasp 3.1 This description applies to wasp probe version 3.11. The

WAsP interface - Main Result - EMD International A/S · WAsP interface - Main Result Calculation: WAsP Interface example Name for WAsP ... (Risø/DTU), where the software package

Agriculture Food European wasp Paper wasp wasp - Pap… · European wasp Paper wasp Paper wasps nest above ground and are not attracted to meat. bee-like shape black antennae yellow-orange

WASP-44b, WASP-45b and WASP-46b: three short … · 1990 D. R. Anderson et al. Figure 3. Photometry of WASP-46, with the best-ﬁtting transit model su-perimposed. Top: WASP discovery

603K & Drug Administration) 1000/0 ESP.AM±! Sport Supplement … · 2016-03-12 · vespa&wasp vespa orange puree wasp okanic wasp jelly tel.019-654-1600 h ttp wasp wasp . epa..eaa

ARES. II. Characterizing the Hot Jupiters WASP-127 b, WASP

Manchester Wasp Control

Tutorial wasp

Chasing the Wasp

JHA IBLE DUAL WASP VCF - RandomSource.net - …randomsource.net/haible/wasp/Haible_Wasp_euro.pdfRANDOM*SOURCE RANDOMSOURCE.NET 1 J. HAIBLE Dual WASP Filter (Euro) JHA IBLE DUAL WASP

CMS-16 WASP

WASP Indoor and Outdoor Occupancy Sensor · the Standard WASP sensor, the product line also includes Dimming WASP and Bluetooth WASP sensors. The interchangeable high/low mount 360°,