invitation and conference agenda - nafems › downloads › 2018-dach-nordic-regional › 20… ·...
TRANSCRIPT
The International Association for the Engineering Modelling, Analysis and Simulation Community
Overview
³ Plenary presentations by Volvo Cars and NIO
³ 40 technical presentations in 15 sessions
³ Special session on dynamics
³ VMAP and PSE workshop sessions
³ Hardware and software exhibition
³ Networking, experience and information exchange
³ For non-members and members (free by using four seminar credits*)
www.nafems.org/2018/nordic
Invitation and conference agenda
* Free attendance for NAFEMS members free by using four NAFEMS seminar credits.
Vers
ion
5 -
10 A
pril
Platinum Sponsor
The NAFEMS Nordic Regional Conference 2018 will
be held once again at the Radisson Blu Scandinavia
Hotel in Göteborg on 24 - 25 April 2018.
Entitled “Engineering Simulation: Best Practices, New
Developments, Future Trends”, the conference will give
delegates an unrivalled independent insight into best
practices and state-of-the-art which consequently show
upcoming trends, tendencies and necessary future
needs in FEA, CFD, MBS and associated technologies.
The conference will increase awareness and provide a
discussion forum for topics that are vital to engineering
industrialists and academics, offering attendees
an unrivalled combination of industrial knowledge,
expertise and forward-thinking to aid their deployment
of CAE over the next few years.
The conference is open to both, members and non-
members of NAFEMS, with members able to attend
the event for free, as part of their membership benefits
package.
We are looking forward to welcome you in
Göteborg, Sweden.
NAFEMS Nordic Steering Committee
Radisson Blu Scandinavia Hotel
Platinum Sponsor
Invitation
NAFEMS NORDIC Steering Committee membersM. Hermodsson (ÅF, SWE)H. Ekman (Altair Engineering, SWE)J. Granlund (Dassault Systemes, SWE)L. Pilgaard Mikkelsen (DTU, DEN)M. Redhe (DYNAmore Nordic, SWE)A. Ptchelintsev (DynaPredict, FIN)E. Weibust (Engicon, NOR/SWE)C.-F. Stein (FS Dynamics Sweden, SWE)M. Andreasson (MSC.Software Sweden, SWE) T. Hansen (Novo Nordisk, DEN)P. Poskiparta (Valmet Automotive, FIN)
13 Feb. 2018
Gold Sponsors
Silver Sponsors
Venue and hotel accommodationRadisson Blu Scandinavia Hotel Södra Hamngatan 59 401 24 Göteborg, Sweden Tel.: +46 31 758 5000 Fax: +46 31 758 5001 www.radissonblu.se/hotell-goteborgNAFEMS NORDIC conference registrants can reserve a discounted room at the hotel. Please find a booking link on our conference website. The group code is: „NAFEMS“.
Conference registrationPlease register by completing the attached registration form or online at www.nafems.org/2018/nordic
Conference languageEnglish
Delegate fee (per person)- Not-NAFEMS members: 5.900 SEK - Presenter from industry 1): free - NAFEMS members using 4 seminar credits: free 2) - NAFEMS member with no seminar credits: 4.000 SEK All costs plus VAT.These fees include attendance at the conference, one copy of the proceedings, lunch for all two days, break refreshments each day, and beverages and snacks in the evening of the first day. Hotel accommodation is not included. 1) Companies for the production/processing of material goods / goods in factories/plants.2) NAFEMS membership fee for companies/institutesA standard NAFEMS site membership costs 1.150 Euro per year. An academic site membership costs 710 Euro per Jahr. Beneath many others, NAFEMS members will get six seminar credits (1 credit = 1/2 seminar/conference day) per year. NAFEMS members can use seminar credits towards free attendance at this event. This event will charge four seminar credits per delegate. You can register 1,5 delegates included in your membership to this confe-rence! Please consider becoming NAFEMS member before registering!
Cancellation policy Cancellation up to 3 weeks before the event date: free of charge; Cancellation up to 1 week before the event date: 75% of registration fee non-refundable; Cancellation up to 1 week before the event date: all seminar credits non-refundable; No show at the event: 100% of registration fee non-refundable
Hardware and software exhibition / sponsoringWe would like to extend an invitation to your company to be part of the conference as exhibitor and/or sponsor. Please request further information or download the exhibition and sponsorhip opportunity brochure (pdf) at www.nafems.org/2018/nordic.
Conference organizationNAFEMS Deutschland, Österreich, Schweiz GmbH Griesstr. 20, 85567 Grafing b.M., Germany Tel. +49 176 217 984 01 e-mail: [email protected] www.nafems.org
About NAFEMS NAFEMS is the International Association of the Engineering Modelling, Analysis and Simulation Community. Our principal aims are to:• Improve the professional status of all persons
engaged in the use of engineering simulation• Establish best practice in engineering simulation• Provide a focal point for the dissemination and
exchange of information and knowledge relating to engineering simulation
• Promote collaboration and communication• Act as an advocate for the deployment of
simulation• Continuously improve the education and training
in the use of simulation techniques• Be recognised as a valued independent authority
that operates with neutrality and integrityWe focus on the practical application of numerical engineering simulation techniques such the Finite Element Method for Structural Analysis, Computational Fluid Dynamics, and Multibody Simulation. In addition to end users from all industry sectors, our stakeholders include technology providers, researchers and academics. Please find more information at www.nafems.org.
Conference website:
www.nafems.org/2018/nordic
Organization
Room A
Session 1 A – Keynote / Sponsor Presentations
Welcome and NAFEMS IntroductionT. Morris, A. R. Oswald (NAFEMS)
Challenges and Opportunities in High Frequency Vibro-Acoustic SimulationsA. Pietrzyk (Volvo Car Corporation)
Virtual Vehicle Development at NION. Brännberg (NIO Nextev (UK))
EMC Simulations for Automotive ApplicationsA. Bergqvist (Vetec / Volvo Car Corporation)
Platinum Sponsor Presentation: Introduction of CAE Software Femtet S. Okawa (Murata Software)
Lunch
Session 2 A – Plenary Presentations
How does the Choice of Organization Influence Strategy and Choice of CAE Tools and the Design Processes?M. Annerfeldt (Siemens Industrial Turbomaschinery); M. Karlsson (University of Linköping)
Towards a Methodology for Robust Calibration of Finite Element Models: A Case Study from Fire Resistance Testing of BulkheadsJ. Anderson, J. Albrektsson, F. Santandrea (RISE Safety)
Design Optimization by using Support Vector MachinesN. Strömberg (Örebro University)
The Effect of In-Networking Computing Capable Interconnects on the Scalability of CAE SimulationsO. Maor, G. Cisneros, D. Cho, Y. Qin, G. Shainer (HPC Advisory Council)
Coffee Break
Room A
Session 3A – Processes
Process Simulation of Clinch JointsS. Jónás, D. Felhös (Knorr-Bremse Rail Systems Budapest); M. Tiszaa (University of Miskolc)
Multi-Scale Uncertainty Analysis – A Tool to Systematically Consider Variability in Lignocellulosic Bioethanol ProcessesD. B. Nickel, C. J. Franzen, M. Janssen (Chalmers University of Technology); R. Fornell (RISE)
“Print-to-Perform” – A Customizable General Framework for Additive Manu-facturing Process SimulationS. Ribeiro-Ayeh, A. Winkler, V. Oancea, J. Hurtado (Dassault Systemes)
ITEA VMAP Project – Working on a Standardisation for Material Data Inferfaces in CAE WorkflowsK. Wolf (Fraunhofer SCAI); G. Duffett (NAFEMS)
Room B
Session 3B – CFD
Training a Mean-Value Engine Model for Control Application Using GT-Power SimulationN. Nickmehr, J. Zhu (Volvo Car Corporation)
Sucker Rod Pump Fluid Friction EvaluationC. Langbauer, P. Vita (University of Leoben)
Simulation and Modelling of 2-Dimensional Graphene Related Material: A Feasibility Study for CAEF. Jareman (AF); R. Holm, A. Isacsson (Chalmers University of Technology)
Apps to Transform the Simulation IndustryD. Ericsson (Comsol)
Exhibition
Get Together with Beverages and Snacks
End of day 1
Agenda – Tuesday, 24 April
10:30
10:40
11:15
11:50
12:25
12:35
13:45
14:10
14:35
15:00
15:25
16:10
16:35
17:00
17:25
17:50
20:00
Preliminary agenda subject to alteration.
Room C
Session 3C – Dynamics
The Moving Frame Method in Dynamics:
Modern Mathematics for Introductory and
Multi-Body DynamicsT. Impelluso (Western Norway University of Applied Sciences)
Room A
Session 4A – Models
A Dynamic Finite Element Model to Determine In-Situ Biomechanics of a Running ShoeA. Tsouknidas, S. Maropoulos (Univ. of Macedonia); D. Drougkas, E. Karatsis (BETA CAE Systems); M. Papagiannaki (Univ. of Thessaloniki); D. Sagris (Techn. Educ. Inst. of Central Macedonia)
Simulation of Local Stresses in Com-plex Materials Directly on CT ScansJ. Fieres, K. Nigge, C. Reinhart (Volume Graphics); P. Schumann (Concept Laser)
Mechanical Characterization of Welded Steel Structures for Offshore Applications using DIC and AEE. Dartfeldt (RISE)
Coffee Break
Session 5A – Optimization
Gaining Insight through Computer Aided OptimizationT. K. Hass (ApioSoft / Cortime)
Sucker Rod String Design Optimi-zation using an Innovative Finite Elements Simulation ApproachC. Langbauer, H. Hofstätter, T. Antretter (University of Leoben)
Supporting Exploration of Design Alternatives using Multivariate Analysis Algorithms for Architectural DesignD. Di Stefano (Esteco)
Lunch Break
Session 6A – Dynamics
Validation Structural Dynamic Models at EpirocS. Enblom, S. Varghese (Epiroc Rock Drills)
Automotive Crash Simulation Robustness using Principal Component Analysis (PCA) ApproachD. Macri, E. Claesson, S. Rydberg (Volvo Car Corporation); D. Aspenberg (DYNAmore Nordic); D. Borsotto (Sidact)
Brake Caliper Design for a Formula Student Race CarB. Vasseljen (Revolve NTNU)
Coffee Break
Agenda – Wednesday, 25 April
08:15
08:40
09:05
09:30
10:15
10:40
11:05
11:30
12:35
13:00
13:25
13:50
Preliminary agenda subject to alteration.
Room B
Session 4B – FSI/Multiphysics
Fluid-Structure Interaction Analysis of Composite Bow FoilG. Tora (cDynamics)
Modeling a Coriolis Flow Meter – FSI Simulation in the Frequency DomainM. Jensen (Comsol)
Numerical Study of a New Hydraulic Subsurface PumpC. Langbauer, P. Vita, J. Gerald (University of Leoben)
Session 5B – Multiphysics
The Importance of Multiphysics SimulationsB. Bragée (Comsol)
How to make a Gas Turbine?M. Annerfeldt (Siemens Industrial Turbomachinery)
Aeromechanics Applied on an Industrial Gas TurbineM. Mayorca (Siemens Industrial Turbomachinery)
Session 6B – Multiphysics/Acoustics
Force Based Squeak & Rattle Assess mentJ. Weber, Y. Wardi (CEVT); M. Moridnejad (Volvo Car Corporation); J. Huang (Geely); T. Fokilidis (BETA CAE Systems); P. Sabiniarz (ÅF)
Numerical Methods for Full Frequency Range Car Audio Installation Effects PredictionA. Talbot, D. Copiello, M. Brandstetter (Free Field Technologies)
Room C
Session 4C – PSE Certification
Workshop/Discussion: The NAFEMS Professional Simulation Engineer (PSE)
Certification SchemeG. Duffett (NAFEMS)
Session 5C – Models
Finite Element Model Best PracticesR. Zanoni (Siemens Gamesa Renew-able Energy / Brunel Netherlands)
Analysis of Concrete Cracking using Damage Mechanics T. Gasch (KTH Royal Institute of Technology)
Session 6C – ITEA VMAP
Workshop/Discussion: A New Interface Standard
for Integrated Virtual Material Model ling in
Manufacturing IndustryG. Duffett (NAFEMS)
Room A
Session 7A – Plenary Presentations
CFD Investigation of Heavy Commercial Truck Thermal Soak and Validation with TestD. Boyaci, C. Dinc (Ford Otosan); S. Dogru, U. Ay (Anova Engineering)
Evaluation of CAE Simulation Results using Photorealism in ProcessingJ. Deleskog, P. Gustavsson, J. Elmered, A. Lundberg (Volvo Car Corporation); D. Katramados (BETA CAE Systems)
Assessing the Mechanical Behaviour of Biological Cells using a Viscoelastic Material ModelB. Fallqvist (Lightness by Design)
Wrap-up and Farewell
End of Conference
14:15
14:40
15:05
15:30
15:40
Registration
Sender
Company / University: ____________________________________________________________________________
VAT-number: ____________________________________________________________________________________
Internal PO number (if needs to be mentioned on invoice): _____________________________________________
Department: _____________________________________________________________________________________
First name: _____________________________________________________________________________________
Last name: _____________________________________________________________________________________
Street: _____________________________________________________________________________________
ZIP-code, city: ___________________________________________________________________________________
Country: _____________________________________________________________________________________
Phone: _____________________________________________________________________________________
Fax: _____________________________________________________________________________________
E-Mail: _____________________________________________________________________________________
Invoice address (if different):
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
Date: _____________________________________________________________________________________
Signature: _____________________________________________________________________________________
Online registration at www.nafems.org/2018/nordic
Please complete and fax to +49 3 22 11 08 99 13 41, e-mail to [email protected] send to NAFEMS GmbH, Griesstraße 20, 85567 Grafing b. München, Germany.
I herewith register for the NAFEMS Nordic Regional Conference, 24 - 25 April 2018 in Göteborg, Sweden:
My company is not NAFEMS member: 5.900 SEK plus VAT
My company is NAFEMS member – free attendance using 4 seminar credits
My company is NAFEMS member – no more seminar credits available: 4.000 SEK plus VAT
Please send me the exhibition and sponsoring opportunities brochure.
I am interested in NAFEMS membership. Please contact me.
Declaration of consent to the use of personal data: The NAFEMS Deutschland, Österreich, Schweiz GmbH collects and process your address data for the organization of the event, for own promotional purposes and allows prestigious companies and institutions (sponsors) to send you information. You may, at any time, revoke your consent by contacting us via phone (+49 176 217 984 01) or in writing to NAFEMS Germany, Austria, Switzerland GmbH, Griesstraße 20, 85567 Grafing b. München, Germany, Fax +49 3 22 11 08 99 13 41..