Ionpure® CEDIPower ControlDisplay BoardComponents

IONPURE IP-DSP – POWER CONTROL DISPLAY BOARDSSingle Channel and Eight Channel for Electrodeionization Modules

When used with Ionpure DC power controllers, display boardsfunction as a superior rectifier with the ability to optimize theoverall performance of your CEDI system.

The IP-DSP Power Control Display Boards are designed to beused with the IONPURE modules and are part of a completeline of modular system components offered to systemintegrators.

POWER CONTROL DISPLAY BOARDS» Power control displays come in single and eight channel

configurations

» Designed for 200, 400 and 600 VDC controllers

» Pre-engineered boards reduce system cost

» Single channel display board can control and display the DCoutput for one module

» Eight channel display board can independently control anddisplay the DC outputs for up to eight DC power controllersin multi-module systems

For additional information on our Power Control Displays call866-876-3340 or visit our web site at www.ionpure.com.Information on CEDI modules and our complete line ofsystem components is also available.

Single Channel Display Eight Channel Display

The information provided in this brochure contains merely general descriptions orcharacteristics of performance which in actual case of use do not always apply asdescribed or which may change as a result of further development of the products.An obligation to provide the respective characteristics shall only exist if expresslyagreed in the terms of the contract.

Ionpure is a trademark of Siemens its subsidiaries or affiliates.

Siemens

10 Technology DriveLowell, MA 01851Tel: 866.876.3340

www.ionpure.comPrinted in U.S.A.ION-CEDI-DS-0806©2006 Siemens Water Technologies Corp.Subject to change without prior notice.

Ionpure® CEDIPower ControlDisplay BoardComponents

PHYSICAL SPECIFICATIONS

Single Channel Display Board

Height 6.56” (166.62 mm)

Width 4.63” (117.60 mm)

Depth 1.43” (36.32 mm)

Shipping Weight 0.85 lbs. (.38 kg)

Eight Channel Display Board

Height 8.71” (221.23 mm)

Width 6.51” (117.6 mm)

Depth 1.51” (38.35 mm)

Shipping Weight 1.65 lbs (0.75 kg)

ELECTRICAL REQUIREMENTSThe 1 channel display board is powered by the Ionpure powercontroller. The 8 channel display board requires a 24 Volt DC(1 Amp) power supply.

OPERATING ENVIRONMENTInstallation should be indoors with no direct sunlight and itshould have a maximum ambient temperature of 122°F (50°C).

MATERIALS CONSTRUCTIONCircuitry is contained on a single PC board mounted on analuminum front panel which is covered by a splash proofgraphic overlay. All display boards rated NEMA 4 (IP56) wheninstalled in NEMA 4 (IP56) or NEMA 12 (IP52) panel enclosures.

QUALITY ASSURANCE STANDARDSUL/CE/CSA marked. Each board is factory tested to meet strictIONPURE and industry standards. Ionpure is an ISO 9001:2000facility.

DESIGN SPECIFICATIONS

IP-DSP Power Control Display Boards

ItemNumber

Module DescriptionCompatible Ionpure DC Power Controller

Max DC ControllerAmperage

IP-DSP1 LXSingle module Display Board up to 10A DC

IP-200VPCB, IP-400VPBC, IP-600VPCB

2.5, 4, 6.5, 10

IP-DSP1P VNXSingle module Display Board for 20A DC

IP-600-20-VPCB 20

IP-DSP8 LXEight module Display Board up to 10A DC

IP-200VPCB, IP-400VPBC, IP-600VPCB

2.5, 4, 6.5, 10

IP-DSP8P VNXEight module Display Board for 20A DC

IP-600-20-VPCB 20

Patch Cable IP-CABLE 06

(Sold Separately)

REAR VIEW

VPCB DC PowerController

(Sold Separately)

DSP DisplayBoard