iot non-mesh sensors & devicesmcwonginc.info/mcwong/media/mcwonginc/03_resources/...bi-level...
TRANSCRIPT
-
30 YEARS OF EXCELLENCESince 1985
IoT Non-Mesh Sensors & Devices
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Incorporated in the state of California in 1985, McWong International, Inc. has grown to become a strategic supplier of high-quality l ighting control equipment and related electrical components.
For over 30 years, we have provided to our customers an unparalleled mix of innovation, quality, and service. Today, the pace of technological change has quickened and competition continues to intensify. We are meeting these challenges through heightened investment in capable individuals, promising technologies, and advanced manufacturing facilities.
2
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Table of Contents
Product Listings
Fixture-Mount Sensors and Sensor/Controllers …………………………………………6
PIR ……………………………………………………………………………………………………………8
Microwave …………………………………………………………………………………………… 13
Ultrasonic ……………………………………………………………………………………………… 18
Ceiling Mount Occupancy Sensors …………………………………………………………… 19
PIR ………………………………………………………………………………………………………… 20
Dual Tech (PIR/Ultrasonic) …………………………………………………………………… 20
Wall Switch Occupancy Sensors ……………………………………………………………… 22
PIR ………………………………………………………………………………………………………… 23
Dual Tech (PIR/Ultrasonic) …………………………………………………………………… 23
Power Packs ……………………………………………………………………………………………… 24
Photocontrols …………………………………………………………………………………………… 28
Additional Resources
Limited Warranty ………………………………………………………………………………………… 33
Visit our website www.mcwonginc.com to learn more about how McWong’s Sensors & Controls can benefit your company.
3
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Product # Description TechInput Voltage
DimMount-ing
Max. Detection
Max Mount-ing Height
Indoor/Outdoor Rated
Applications
PSC-BL-I-FM-DC0(-BLE)*Bi-level PIR Occupancy Sensor (optional Bluetooth Enabled)*
P 12-24VDC Y FM, CM 40ft radius 40ftIndoor/Outdoor**
OC, WH, PG, AP
PSC-BL-I-FM-DC0(-BLE)*-S Bi-level PIR Occupancy Sensor Wet Location Side Mount (optional Bluetooth Enabled)*
P 12-24VDC Y FM, CM 40ft radius 40ft Outdoor OC, WH, PG, AP
PSC-BL-I-FM-DC0(-BLE)*-BBi-level PIR Occupancy Sensor Wet Location Bottom Mount (op-tional Bluetooth Enabled)*
P 12-24VDC Y FM, CM 40ft radius 40ft Outdoor OC, WH, PG, AP
PSC-BL-I-RD-DC0(-BLE)*Bi-level PIR Remote Mount Occu-pancy sensor Daylight Harvesting (optional Bluetooth Enabled)*
P 12-24VDC Y FM, CM 10Ft radius 8ft Indoor OC, SP
PSC-BL-I-RT-DC0(-BLE)*Bi-level PIR Remote Mount Occu-pancy sensor (optional Bluetooth Enabled)*
P 12-24VDC Y FM, CM 10Ft radius 10ft Indoor OC, SP
PSC-BL-I-FM-110(-BLE)*Bi-Level PIR Occupancy Sensor w/Load Switch (optional Bluetooth Enabled)*
P 120-277VAC Y FM 40ft radius 40ft Indoor OC, WH, PG
PSC-HB-I-FM-700 Standard PIR sensor (no photocell) P 120-277VAC FM 40ft radius 40ft Indoor OC, WH, PG
PSC-HB-I-FM-710 Standard PIR sensor w/ photocell P 120-277VAC FM 40ft radius 40ft Indoor OC, WH, PG
PSC-HB-I-FM-100WWet location PIR sensor (no photocell)
P 120-277VAC FM 40ft radius 40ft Outdoor OC, WH, PG, AP
PSC-HB-I-FM-110W Wet location PIR sensor w/ photocell P 120-277VAC FM 40ft radius 40ft Outdoor OC, WH, PG, AP
PSC-HB-I-FM-200 347/480V PIR sensor (no photocell) P 347/180VAC FM 40ft radius 40ft Indoor OC, WH, PG
PSC-HB-I-FM-210 347/480V PIR sensor w/ photocell P 347/180VAC FM 40ft radius 40ft Indoor OC, WH, PG
PSC-HB-I-FM-200WWet location 347/480V PIR sen-sor (no photocell)
P 347/180VAC FM 40ft radius 40ft Outdoor OC, WH, PG, AP
PSC-HB-I-FM-210WWet location 347/480V PIR sen-sor w/ photocell
P 347/180VAC FM 40ft radius 40ft Outdoor OC, WH, PG, AP
PSC-BL-M-FM-DC0(-BLE)*Bi-level Microwave Occupancy Sen-sor (optional Bluetooth Enabled)*
M 12-24VDC YFM, CM, WM
36ft x 92ft 30ft Outdoor OC, WH, AP
PSC-BL-M-FC-DC0(-BLE)*Bi-level Microwave Occupancy Sen-sor (optional Bluetooth Enabled)*
M 12-24VDC YFM, CM, WM
36ft x 92ft 30ft Indoor OC, WH, AP
PSC-BL-M-RT-DC0(-BLE)*Bi-level Microwave Remote Mount Occupancy sensor (optional Blue-tooth Enabled)*
M 12-24VDC Y FM, CM, WM
16ft radius 10ft Indoor OC, PG, BD
PSC-ID-M-FM-600 Microwave Occupancy sensor M 120-277VAC FM, CM 16ft radius 10ft Indoor OC
PSC-ID-M-FM-500 Microwave Occupancy sensor M 120-277VAC FM, CM 26ft radius 10ft Indoor OC, WH
PSC-BL-U-FM-DC0(-BLE)*Bi-level Ultrasonic Occupancy Sen-sor (optional Bluetooth Enabled)*
U 12-24VDC Y FM, CM 32ft x 32ft 10ft Indoor SP, LR, HS
Sensors & Sensor/Controllers (Dim.)
* PacWave non-mesh Bluetooth only, please refer to McWong IoT Mesh catalog for Bluetooth-Mesh options. **PSC-BL-I-FM-DCO is outdoor use at the Sensor Collar part only. Side and Bottom Mount IP65 enclosure available for completely outdoor sensor option.
Small / Partitioned Office SP
Open Office / Conference Room OC
Lavatory / Rest Room LR
Hallways / Stairwell HS
Warehouse WH
Area/Site Lighting / Parking Lot AP
Parking Garage PG
Bollard BD
PIR P
Ultrasonic U
Microwave M
Dual Technology (PIR & Ultrasonic) D
Fixture Mount FM
Ceiling CM
Wall Mount WM
4
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Product # Description TechInput Voltage
DimMount-ing
Max. Detection
Max Mount-ing Height
Indoor/Outdoor Rated
Applications
PSC-ID-I-CM-101Line Voltage Ceiling Mount PIR Occupancy Sensor
P 120-277VAC CM 22ft radius 8ft Indoor OC
PSC-ID-I-CM-301Low Voltage Ceiling Mount PIR Occupancy Sensor
P 24VDC CM 22ft radius 8ft Indoor OC
PSC-ID-D-CM-101Line Voltage Ceiling Mount Dual Tech Occupancy Sensor
D 120-277VAC CM 22ft radius 8ft Indoor SP, OC, LR
PSC-ID-D-CM-301Low Voltage Ceiling Mount Dual Tech Occupancy Sensor
D 24VDC CM 22ft radius 8ft Indoor SP, OC, LR
PSC-ID-I-WS-100 Wall switch PIR occupancy sensor P 120VAC WM 30ft 4ft Indoor SP, LR
PSC-ID-I-WS-101 Wall switch PIR occupancy sensor (no neutral)
P 120VAC WM 30ft 4ft Indoor SP, LR
PSC-ID-I-WS-110Wall switch PIR occupancy/vacan-cy sensor
P 120VAC WM 40ft 4ft Indoor SP, LR
PSC-ID-I-WS-120Wall switch PIR occupancy/vacan-cy sensor
P 120/277VAC WM 40ft 4ft Indoor SP, LR
PSC-ID-I-WS-130Wall switch PIR occupancy/vacan-cy sensor (no neutral)
P 120/277VAC WM 40ft 4ft Indoor SP, LR
PSC-ID-I-WS-130DWall switch dual relay PIR occupancy/vacancy sensor (no neutral)
P 120/277VAC WM 40ft 4ft Indoor SP, LR
PSC-ID-D-WS-120Wall switch dual technology occu-pancy/vacancy sensor
D 120/277VAC WMP: 40ftU: 20ft
4ft Indoor SP, LR
Sensors
Photocontrol
Small / Partitioned Room SP
Open Office / Conference Room OC
Lavatory / Rest Room LR
Hallways / Stairwell HS
Warehouse WH
Area/Site Lighting / Parking Lot AP
Parking Garage PG
Bollard BD
PIR P
Ultrasonic U
Microwave M
Dual Technology (PIR & Ultrasonic) D
Fixture Mount FM
Ceiling CM
Wall Mount WM
Street Lighting ST
Area/Site Lighting AL
Landscape Lighting LL
Threaded Mount TM
Twistlock TL
Flush Mount UM
Product # DescriptionInput Voltage
MOV Mounting Indoor/Outdoor Rated Applications
PSC-OS-101 Photocontrol Switch Threaded Mount 120VAC NA TM Outdoor LL
PSC-OS-201 Photocontrol Switch Twistlock 120-277VAC 546J TL Outdoor ST
PSC-OS-202 Photocontrol Switch Twistlock 347VAC 546J TL Outdoor ST
PSC-OS-203 Photocontrol Switch Twistlock 480VAC 546J TL Outdoor ST
PSC-OS-301 Photocontrol Switch Flush Mount 120-277VAC NA UM Outdoor AL
5
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
McWong’s offering of traditional sensors and non-mesh Bluetooth-enabled sensor/controllers features economical, robust control capabilities for a wide range of indoor and outdoor applications. This family of occupancy and motion sensors includes a range of detection technologies—passive infrared, ultrasonic and microwave—as well as numerous form factors for both typical and more challenging applications. Traditional fixture-mount sensors are available in a multitude of choices. Customers can also select fixture-embedded models or remote-mount models for environments where conventional mounting might be difficult. Alternatively, wall switch sensors provide convenience in applications such as small offices, executive washrooms and storage rooms. Both low voltage and line voltage models are offered for additional installation flexibility. A broad selection of sensors within
Fixture-Mount Sensors and Sensor/Controllers
PIR Microwave Ultrasonic
E341446
this family are multi-function sensor/controllers, featuring 0-10V dimming for compliance with energy code bi-level dimming requirements and other performance / energy efficiency strategies, including lumen maintenance, high-end trimming and task tuning.
For applications where Bluetooth® beacons are desired, such as indoor positioning or navigation, RTLS (real-time location services), asset tracking, among others, McWong’s team can ‘beaconize’ any of the dimming sensors within this family, further extending the multi-functionality: enabling beacon advertising, occupancy sensing and dimming control in a single SKU. Warehouse or retail operations are ideal for these sensors as are commercial office buildings, airports, train stations, industrial facilities or shopping malls.6
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
BLE/C
Additonal Options:[Blank] = No option (for BL only)
S = Side Mount (for BL only)
B = Bottom Mount (for BL only)
/C = Quick Connectors (for BL only)
M = Side/Bottom Mount Kit (for BL only)
A = Mounting Arm IP20 (for HB only)
Bluetooth Options:[Blank] = No wireless control
BLE* = Bluetooth Enabled*
Input Voltage:DC0 = 12-24VDC Vin (for BL only)
0-10VDC Dimming (for BL only)
1XX = 120-277 VAC
2XX = 347-480 VAC
X00 = No photocell
X10 = with photocell
Mounting Method:FM = Fixture Mount
FC = Compact Fixture mount
RT = Remote Head mounting option
(only on PIR and Microwave)
Sensor Technology:I = Passive Infrared (PIR)
M = Microwave
U = Ultrasonic
Application: BL = Bi-level dimming
HB = HighBay
ID = Indoor
Product Series: PSC = Sensors & controls
PSC - BL - I - FM - DC0 - BLE - S/C
How to Order
* PacWave non-mesh Bluetooth only, please refer to McWong IoT Mesh Catalog for Bluetooth-Mesh Options.
7
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
2.91
in
2.91 in
Ø2.
40 in
2.75 in
*Trimpot #1 on left adjusts time delay. Trimpot #2 in the middle adjusts ambient light sensitivity. Trimpot #3 on right adjusts motion detection range and sensitivity. Turn clockwise to increase, turn counterclockwise to decrease.
Dipswitch 1 Dipswitch 2 DIM LevelOFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%
IP65*
*Option for Bottom/Side mount IP65 Housing
Overview
Sensor Type Quad element PIR
Input 12-24VDC/ 25mA sensor (50mA w/BLE)
0-10V Dimming 100mA (multiple drivers)
Relay Control Vin-2.5V 100mA source
Max Detection Area 12m mounting/24m Diameter
Time Delays (TD1/TD2) 5 sec/10 sec, 5 min/30 min, 15 min
/45 min, 30 min/60 min, 10 min/∞
Photocell Enable / disable
Operating -30°C to 70°C
Storage Temperature -40°C to 80°C
Relative Humidity 90-95% non-condensing
PIR Dimming Occupancy Sensor
Wiring
How to order
Dimensions
Settings Adjustment
Specifications: PSC-BL-I-FM-DC0 (High Bay/Low Bay)
Note: if using power pack as power source, connect motion high and/or motion low, depending on power pack relay circuitry.
12-24V Power SourceSen
sor
YLW
GRY
PRP
0-10V Driver Dimming Wires
WHTMot
ion
Low
Mot
ion
Hig
hD
IM
GN
D0-
10V
RED+V
BLKGN
DHousing Lens Cover
1.37
in
⌀ø2.
40 in
0.83
in
0.73
in
1.41
in
2.18 in1.12 in
Model No. DescriptionInputVoltage
Output IP Rating
PSC-BL-I-FM-DC0(-BLE) ** Bi-level PIR Occupancy Sensor (optional Bluetooth Enabled) 12-24VDC0-10V, Relay Control
IP20/IP65
8
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
PIR Dimming Occupancy Sensor
Wiring
Dimensions
Specifications: PSC-BL-I-RT-DC0 (Remote Mount)
Note: if using power pack as power source, connect motion high and/or motion low, depending on power pack relay circuitry.
12-24V Power SourceSen
sor
YLW
GRY
PRP
0-10V Driver Dimming Wires
WHTMot
ion
Low
Mot
ion
Hig
hD
IM
GN
D0-
10V
RED+V
BLKGN
D
Settings AdjustmentDipswitch 1 Dipswitch 2 DIM Level
OFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%
Trimpot #1 on left adjusts time delay.Trimpot #2 in middle adjusts ambient light sensitivity.Trimpot #3 on right adjusts motion detection range and sensitivity.Turn clockwise to increase, turn counterclockwise to decrease.
Overview
Sensor Type Quad element PIR
Input 12-24VDC/ 25mA Sensor (50 mA W/ BLE)
0-10V Dimming 100mA (multiple drivers)
Relay Control Vin-2.5V 100mA source
Max Detection Area 3m mounting/6m Diameter
Time Delays (TD1/TD2) 5 sec/10 sec, 5 min/30 min, 15 min
/45 min, 30 min/60 min, 10 min/∞
Photocell Enable /disable
Operating Temperature -30°C to 70°C
Storage Temperature -40°C to 80°C
Relative Humidity 90-95% non-condensing
Color White
Trimpot #1: Time Delay
Trimpot #2: Ambient Light
Trimpot #3: Motion Detection Range
Dipswitches: Dimming Level
How to order
Model No. DescriptionInputVoltage
Output IP Rating
PSC-BL-I-RT-DC0(-BLE) Bi-level PIR Remote Mount Occupancy Sensor (optional Bluetooth Enabled) 12-24VDC0-10V, Relay Control
IP20
0.73
in
1.08 in
6 in
1.37
in2.18 in
9
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
PIR Dimming Occupancy Sensor
Wiring
Dimensions
Specifications: PSC-BL-I-RD-DC0 (Remote Mount - Daylight Harvesting)
Note: if using power pack as power source, connect motion high and/or motion low, depending on power pack relay circuitry.
12-24V Power SourceSen
sor
YLW
GRY
PRP
0-10V Driver Dimming Wires
WHTMot
ion
Low
Mot
ion
Hig
hD
IM
GN
D0-
10V
RED+V
BLKGN
D
Settings AdjustmentDipswitch 1 Dipswitch 2 DIM Level
OFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%
Trimpot #1 on left adjusts time delay.Trimpot #2 in middle adjusts ambient light sensitivity.Trimpot #3 on right adjusts motion detection range and sensitivity.Turn clockwise to increase, turn counterclockwise to decrease.
Overview
Sensor Type Quad element PIR
Input 12-24VDC/ 25mA Sensor (50 mA W/ BLE)
0-10V Dimming 100mA (multiple drivers)
Relay Control Vin-2.5V 100mA source
Max Detection Area 2.4m mounting/4.8m Diameter
Time Delays (TD1/TD2) 5 sec/10 sec, 5 min/30 min, 15 min
/45 min, 30 min/60 min, 10 min/∞
Photocell Enable /disable*
Operating Temperature -30°C to 70°C
Storage Temperature -40°C to 80°C
Relative Humidity 90-95% non-condensing
Color White
Trimpot #1: Time Delay
Trimpot #2: Ambient Light
Trimpot #3: Motion Detection Range
Dipswitches: Dimming Level
0.73
in
1.08 in
6 in
1.37
in2.18 in
* Daylight Harvesting with BLE only
How to order
Model No. DescriptionInputVoltage
Output IP Rating
PSC-BL-I-RD-DC0(-BLE)Bi-level PIR Remote Mount Occupancy Sensor Daglight harvesting (optional Bluetooth Enabled)
12-24VDC0-10V, Relay Control
IP20
10
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
W iring D ia-gram s
PIR Dimming Occupancy Sensor
Wiring
Dimensions
Specifications: PSC-BL-I-FM-110 (High Bay/Low Bay)
Overview
Sensor Type PIR occupancy sensor
Input 120-277VAC
Max Load 800 VA @ 120VAC, 6.7A
1200 VA @ 208/240/277, 4.3A
0-10V Dimming 100 mA (multiple drivers)
Max Detection Area 12m mounting / 24m diameter
Time Delays (TD1/TD2) 5 sec/10 sec, 2min/15min, 5 min/30 min,
10min/60min, 15 min/45 min, 30 min/
60 min, 10 min/∞, 20min/∞
Photocell Enable / disable
Operating Temperature -20° C to 60°C
Storage Temperature -40° C to 80°C
Relative Humidity 90-95% non-condensing at 30°C
Color White
How to order
Model No. DescriptionInputVoltage
Output/Max Load IP Rating
PSC-BL-I-FM-110(-BLE)Bi-Level PIR Occupancy Sensor w/Load Switch(add “-BLE” suffix for Bluetooth Enabled version)
100-277VAC0-10VDC(Dimming) 800VA @ 120VAC, 6.7A1200VA @ 208/240/277VAC, 4.3A
IP20
4.13
in
4.13 in1.73 in
0.50 in
Settings AdjustmentSensitivity Delay Time Dimming
1 2 3 4 5 6 7 8
↓ ↓ 100% ↓ ↓ ↓ 5sec/10sec ↓ ↓ OFF ↓ PIR sensor only
↓ ↑ 90% ↓ ↓ ↑ 2min/15min ↓ ↑ 10% ↑ Photocell + Sensor
↑ ↓ 80% ↓ ↑ ↓ 5min/30min ↑ ↓ 25%
↑ ↑ 70% ↓ ↑ ↑ 10min/60min ↑ ↑ 50%
↑ ↓ ↓ 15min/45min
↑ ↓ ↑ 30min/60min
↑ ↑ ↓ 10min/∞
↑ ↑ ↑ 20min/∞
LINE
NEUTRAL
L N
DIM+ DIM-
11
-
1.73 in
IP20
IP65
* PSC-HB-I-FM-700/710 does not have Back Mounting option**Sensors with “W” for wet location does ont have Mounting Arm and Back Mounting Options
Model No. DescriptionInput Voltage(VAC)
Output / Max Load IP Rating
PSC-HB-I-FM-700* Standard PIR sensor (no photocell) 120-277800VA @ 120VAC, 6.7A1200VA @ 208/240/277VAC, 4.3A
IP20
PSC-HB-I-FM-710* Standard PIR sensor with photocell 120-277800VA @ 120VAC, 6.7A 1200VA @ 208/240/277VAC, 4.3A
IP20
PSC-HB-I-FM-100W Wet location PIR sensor (no photocell) 120-277800VA @ 120VAC, 6.7A 1200VA @ 208/240/277VAC, 4.3A
IP65
PSC-HB-l-FM-110W Wet location PIR sensor with photocell 120-277800VA @ 120VAC, 6.7A 1200VA @ 208/240/277VAC, 4.3A
IP65
PSC-HB-l-FM-200 347/480V PIR sensor (no photocell) 347/4801500VA @ 347VAC, 4.3A2000VA @ 480VAC, 4.1A
IP20
PSC-HB-l-FM-210 347/480V PIR sensor with photocell 347/4801500VA @ 347VAC, 4.3A2000VA @ 480VAC, 4.1A
IP20
PSC-HB-I-FM-200W Wet location 347/480V PIR sensor (no photocell) 347/4801500VA @ 347VAC, 4.3A2000VA @ 480VAC, 4.1A
IP65
PSC-HB-I-FM-210W Wet location 347/480V PIR sensor with photocell 347/4801500VA @ 347VAC, 4.3A2000VA @ 480VAC, 4.1A
IP65
How to order
PIR High Bay Occupancy Sensor
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
12
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
2.91
in2.
61 in
1.67
in
2.20
inG1/2
in
0.41 in2.06
in
1.67
in
2.91 in
G1/2
0.83
in
0.12
in
Overview
Sensor Type Microwave 10.525 GHz
Input 12-24VDC/ 60mA Sensor( 85mA w/ BLE)
0-10V Dimming 100mA (multiple drivers)
Relay Control Vin-2.5V 100mA source
Max Detection Area 9m mounting/11m x 28m
Time Delays (TD1/TD2) 5 sec/10 sec, 5 min/30 min, 15 min
/45 min, 30 min/60 min, 10 min/∞
Photocell N/A
Operang Temperature -30° C to 70°C
Storage Temperature -40° C to 80°C
Relave Humidity 90-95% non-condensing
Color White
Microwave Dimming Occupancy Sensor
Specifications: PSC-BL-M-FM-DC0
Wiring
12-24V Power SourceSen
sor
YLW
GRY
PRP
0-10V Driver Dimming Wires
WHTMot
ion
Low
Mot
ion
Hig
hD
IM
GN
D0-
10V
RED+V
BLKGN
D
Settings AdjustmentDipswitch 1 Dipswitch 2 DIM Level
OFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%
Trimpot #1 on left adjusts time delay.Trimpot #2 on right adjusts motion detection range and sensitivity.Turn clockwise to increase, turn counterclockwise to decrease.
How to order
Model No. DescriptionInputVoltage
Output IP Rating
PSC-BL-M-FM-DC0(-BLE) Bi-level Microwave Occupancy Sensor (optional Bluetooth Enabled) 12-24VDC0-10V, Relay Control
IP65
Dimensions
Note: if using power pack as power source, connect motion high and/or motion low, depending on power pack relay circuitry.
Time Delay
Motion Detection Range
13
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Physical Dimensions
Note : Mount sensor withwires to the righ t of the trimpots/dipswitch for best performance. Length of detection pattern (i.e. 24, 26, 30m) is in line with the sensor face that has the trimpots/dipswitch.
All units shown are in meters.
Trimpot #2: Motion Detection Range
Dipswitches: Dimming Level
Trimpot #1: Time Delay
(Microwave - compact form factor)
Dimming Occupancy Sensor
Specifications: PSC-BL-M-FC-DC0
2.32in
1.03
in2.
32in
1.03inOverview
Sensor Type Microwave 10.525 GHz
Input 12-24VDC/ 60mA sensor (85mA w/BLE)
0-10V Dimming 100mA (multiple drivers)
Relay control Vin-2.5V 100mA source
Max Detection Area 9m mounting/11m x 28m
Time Delays (TD1/TD2) 5 sec/10 sec, 5 min/30 min, 15 min
/45 min, 30 min/60 min, 10 min/∞
Photocell N/A
Operang Temperature -30° C to 70°C
Storage Temperature -40° C to 80°C
Relave Humidity 90-95% non-condensing
Color White
Wiring
Note: if using power pack as power source, connect motion high and/or motion low, depending on power pack relay circuitry.
12-24V Power SourceSen
sor
YLW
GRY
PRP
0-10V Driver Dimming Wires
WHTMot
ion
Low
Mot
ion
Hig
hD
IM
GN
D0-
10V
RED+V
BLKGN
D
Settings AdjustmentDipswitch 1 Dipswitch 2 DIM Level
OFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%
Trimpot #1 on left adjusts time delay.Trimpot #2 on right adjusts motion detection range and sensitivity.Turn clockwise to increase, turn counterclockwise to decrease.
Dimensions
How to order
Model No. DescriptionInputVoltage
Output IP Rating
PSC-BL-M-FC-DC0(-BLE) Bi-level Microwave Occupancy Sensor 12-24VDC0-10V, Relay Control
IP20
Microwave Dimming Occupancy Sensor
Specifications: PSC-BL-M-FM-DC0
14
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Physical Dimensions
Note : Mount sensor withwires to the righ t of the trimpots/dipswitch for best performance. Length of detection pattern (i.e. 24, 26, 30m) is in line with the sensor face that has the trimpots/dipswitch.
All units shown are in meters.
Trimpot #2: Motion Detection Range
Dipswitches: Dimming Level
Trimpot #1: Time Delay
(Microwave - compact form factor)
Dimming Occupancy Sensor
Specifications: PSC-BL-M-FC-DC0
2.32in
1.03
in2.
32in
1.03in
Note: if using power pack as power source, connect motion high and/or motion low, depending on power pack relay circuitry.
12-24V Power SourceSen
sor
YLW
GRY
PRP
0-10V Driver Dimming Wires
WHTMot
ion
Low
Mot
ion
Hig
hD
IM
GN
D0-
10V
RED+V
BLKGN
D
Microwave Dimming Occupancy Sensor
Specifications: PSC-BL-M-RT-DC0 (Remote Mount)
Overview
Sensor Type Microwave 24.11 GHz
Input 12-24VDC/ 60mA Sensor (85mA w/BLE)
0-10V Dimming 100mA (multiple drivers)
Relay Control Vin-2.5V 100mA source
Max Detection Area 3m mounting/10m diameter
Time Delays (TD1/TD2) 5 sec/10 sec, 5 min/30 min, 15 min
/45 min, 30 min/60 min, 10 min/∞
Photocell Default off*
Operating Temperature -30° C to 70°C
Storage Temperature -40° C to 80°C
Relative Humidity 90-95% non-condensing at 30°C
Color White
Dimensions
1.38 in 1.23 in
1.36
in
19.4
9 in
2.28 in 1.02 in
1.54 in
Settings Adjustment
Dipswitch 1 Dipswitch 2 DIM LevelOFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%
Trimpot #1 on left adjusts time delay.Trimpot #2 on right adjusts motion detection range and sensitivity.Turn clockwise to increase, turn counterclockwise to decrease.
Wiring
Dipswitches: Dimming Level
Trimpot #1: Time Delay
Trimpot #2: Motion Detection Range
* Photocell can be activated through optional BLE version only
How to order
Model No. DescriptionInputVoltage
Output IP Rating
PSC-BL-M-RT-DCO(-BLE) Bi-level Microwave Remote Mount Occupancg Sensor 12-24VDC0-10V, Relay Control
IP20
15
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Microwave Occupancy Sensor
Specifications: PSC-ID-M-FM-600
Overview
Sensor Type Microwave 5.8 GHz
Input Voltage 120-277VAC, 50/60Hz
Max Load (Tungsten) 1200VA @ 120VAC, 10A
Max Load (Ballast) 600VA @ 120VAC, 5A
600VA @ 277VAC, 2.2A
Max Detetion Area 3m mounting/10m diameter
Time Delay 5 sec to 30 min
Operating Temperature -20° to 45°C
Storage Temperature -20° to 45°C
Relative Humidity 20-90% non-condensing
Color White
Dimensions
Wiring
SENSOR
LO AD
N e utral (White )
H ot (B lack)
(R e d)
Settings AdjustmentMicrowave Sensor Dipswitches
Time Delay: Sensor Range: Photocell:
1 2 3 4 5 6
↓ ↓ ↓ 5 sec (test) ↓ ↓ 5 m ↓ OFF
↓ ↓ ↑ 30 sec ↓ ↑ 4 m ↑ ON
↓ ↑ ↓ 1 min ↑ ↓ 3 m
↓ ↑ ↑ 3 min ↑ ↑ 2 m
↑ ↓ ↓ 5 min
↑ ↓ ↑ 10 min
↑ ↑ ↓ 20 min
↑ ↑ ↑ 30 min
How to order
Model No. DescriptionInputVoltage
Max Load IP Rating
PSC-ID-M-FM-600 5.8 GHz Microwave Occupancy Sensor120-277VAC, 50/60Hz
600VA @120VAC Tungsten600VA @120VAC Ballast 600VA @277VAC Ballast
IP20
0.5 in1.16 in
1.16 in1.2 in
1.73 in1.75 in
3.3 in
2.31in
2.31in
16
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Dimensions
↓ ↓ ↓ ↓ ↓ ↓↑ ↓ ↑ ↓ ↓ ↑
↑ ↓ ↓ ↑ ↓↑ ↑ ↓ ↑ ↑
↑ ↓ ↓↑ ↓ ↑↑ ↑ ↓↑ ↑ ↑
0m
2
2
4
4
6
6 8
8
10
100m 1 2 3 4 5 6 7 88 7 6 5 4 3 2 1 9 10 11 1212 11 10 9
9
8
7
6
5
4
3
2
1
Overview
Sensor Type Microwave 5.8 GHz
Input Voltage 120-277VAC, 50/60Hz
Max Load (Tungsten) 800VA @ 120VAC, 6.7A
Max Load (Ballast) 400VA @ 120VAC, 3.4A
600VA @ 277VAC, 2.2A
Max Detection Area 4m mounting/16m diameter
Time Delay 5 sec to 30 min
Photocell Sensitivity 20-200 Lux
Operating Temperature -40° to 60°C
Storage Temperature -40° to 60°C
Relative Humidity 20-90% non-condensing
Mounting Fixture mount
Color White
How to order
Model No. DescriptionInputVoltage
Max Load IP Rating
PSC-ID-M-FM-500 5.8 GHz Microwave Occupancy Sensor120-277VAC, 50/60Hz
800VA @120VAC,6.7A Tungsten400VA @120VAC,3.4A Ballast 600VA @277VAC,2.2A Ballast
IP20
Microwave Occupancy Sensor
Specifications: PSC-ID-M-FM-500
17
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
OverviewSensor Type Ultrasonic 40KHz ± 1kHz.
Input 12-24VDC/45mA sensor (70 mA w/BLE)
0-1OV Dimming 100mA (multiple drivers)
Relay Control Vin-2.5V 100mA source
Max Detection Area 3m mounting/7m x 8m
Time Delays (TD1) 1 min, 5 min, 20 min*
Photocell Default off*
Operating Temperature -30° C to 70°C
Storage Temperature -40° Cto 80°C
Relative Humidity 90-95% non-condensing
Color White
1.27
in0.
91 in
0.81
in0.
79 in
6.11 in5.72 in3.61 in
Dimensions
Case length without foot bracket: 5.17 in
Settings AdjustmentDipswitch 1 Dipswitch 2 DIM Level
OFF OFF OFFOFF ON 10%ON OFF 25%ON ON 50%
Trimpot #1 on left adjusts motion detection range and sensitivity.Trimpot #2 on right adjusts time delay.Turn clockwise to increase, turn counterclockwise to decrease.
* Time Delays (TD2) and Photocell can be activated through optional BLE version only
Test Button
Model No. Description Input Voltage Output IP Rating
PSC-BL-U-FM-DC0(-BLE) Bi-level Ultrasonic Occupancy Sensor (optional Bluetooth Enabled) 12-24VDC0-10V, Relay Control
IP20
Ultrasonic Dimming Occupancy Sensor
Specifications: PSC-BL-U-FM-DC0
Wiring
Note: if using power pack as power source, connect motion high and/or motion low, depending on power pack relay circuitry.
How to Order
⁰⌀
12-24V Power SourceSen
sor
YLW
GRY
PRP
0-10V Driver Dimming Wires
WHTMot
ion
Low
Mot
ion
Hig
hD
IM
GN
D0-
10V
RED+V
BLKGN
D
18
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
⁰⌀
Ceiling Mount Occupancy Sensors
19
-
D
D
Sensor Type PIR / Ultrasonic
Input Voltage 120-277VAC or 24VDC
Max Load (Resistive) 800W @ 120VAC, 60Hz
Max Load (Fluorescent) 800VA @ 120VAC, 1600VA @ 277VAC
Max Load (Motor) 1/4 hp @ 120VAC, 60Hz
PIR Sensor Range Dia. / ² / 360° coverage 13m 140m
Ultrasonic Sensor Range x / ² 9m 9m 80m
Time Delay 5 sec to 30 min
Photocell Sensitivity 10-150 fc (107-1615 lux)
Operating Temperature -0° to 55°C
Storage Temperature -10° to 60°C
Relative Humidity 95% non-condensing
Mounting Ceiling mount (8-10ft)
Color White
E350121
2.5m
6.5m 4m 2m 1m 0 1m 2m 4m 6.5m
9m x 9m
13m
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
20
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Sensor Type PIR / Ultrasonic
Input Voltage 120-277VAC or 24VDC
Max Load (Resistive) 800W @ 120VAC, 60Hz
Max Load (Fluorescent) 800VA @ 120VAC, 1600VA @ 277VAC
Max Load (Motor) 1/4 hp @ 120VAC, 60Hz
PIR Sensor Range Dia. / ² / 360° coverage 13m 140m
Ultrasonic Sensor Range x / ² 9m 9m 80m
Time Delay 5 sec to 30 min
Photocell Sensitivity 10-150 fc (107-1615 lux)
Operating Temperature -0° to 55°C
Storage Temperature -10° to 60°C
Relative Humidity 95% non-condensing
Mounting Ceiling mount (8-10ft)
Color White
E350121
2.5m
6.5m 4m 2m 1m 0 1m 2m 4m 6.5m
9m x 9m
13m
Dimensions
1.38 in
0.68 in Dia 4.52 in
3.62 in
21
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Wall Switch Occupancy Sensors
22
-
Model No. Description Min Load Max Load † Input
Voltage (VAC)
PSC-ID-I-WS-100* Wall switch PIR occupancy sensor 25W 500VA 1/8 Hp motor 120
PSC-ID-I-WS-101* ** Wall switch PIR occupancy sensor (no neutral) 25W 500VA 1/8 Hp motor 120
PSC-ID-I-WS-110 Wall switch PIR occupancy/vacancy sensor None
800VA @ 120VAC 1600VA @ 277VAC
120
1/4 Hp motor @ 120VAC
PSC-ID-I-WS-120 Wall switch dual voltage input PIR occupancy/vacancy sensor None 120/277
PSC-ID-I-WS-130 Wall switch PIR occupancy/vacancy sensor (no neutral) None 120/277
PSC-ID-I-WS-130D Wall switch dual relay PIR occupancy/vacancy sensor (no neutral) None 120/277
PSC-ID-D-WS-120 Wall switch dual technology occupancy/vacancy sensor None 120/277
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
23
-
1.88 in
1.62 in
WT: 4.3 oz 2.78 in
0.47 in
Product Type Class 2 output power supply
Input Voltage 120-277VAC, 50/60Hz
Output 24VDC, 150mA (w/ relay connected)
Max Load (Ballast) 20A @ 120-277VAC
Max Load (Incandescent) 20A @ 120VAC
Max Load (motor) 1hp @ 120/240VAC
Max No. of Sensors Controls up to 6 sensors in parallel
Operating Temperature 0° to 55°C
Storage Temperature -10° to 60°C
Relative Humidity 95% non-condensing
Mounting Fixture or J-box mount, 0.5 inch knockout
Color White
Certifications UL 244A Plenum rated
UL 94V-0 case
UL/cUL listed: E341446
1.62 in
1.68 in
0.47 in
2.78 in
How to order
Model No. DescriptionInputVoltage
Output
PSC-AC-PP-100 Low Voltage Power Pack 100-277VAC 24VDC
Power Pack
Specifications: PSC-AC-PP-100 (Junction Mount, with Relay)
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
24
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
Pow
er P
ack
YLW
BRN
PRP
WHTMot
ion
Low
Mot
ion
Hig
hD
IM
GN
D0-
10V
RED+V
BLKGN
D
Note: If using sensor dimming, cap driver dimming wires, and if using driver dimming, cap sensor dimming wires.
PRP
GRE
RED
BLK Hot
Load
AC H
ot
WHT NeutralAC
N
eutra
l
Load
12-24V Output0-10V Sensor Dimming Wires
0-10V Driver Dimming Wires
DIM
G
ND
0-10
V
Power Pack
Specifications: PSC-AC-PP-200 (Fixture Mount Dimming, with Relay)
Overview
Product Type Low Voltage Power Pack
Input Voltage 120-277VAC
Output Voltage 12.4VDC
Max Load 10A load @250V(PSC-AC-PP-200)
N/A(PSC-AC-PP-300)
Operating Temperature -30° C to 70°C
Storage Temperature -40° C to 80°C
Relative Humidity 90-95% non-condensing
Mounting Fixture Mount
Color White
Dimensions
5.04 in
4.65 in
4.20 in
0.71
in1.
08 in
1.37
in
Wiring
How to order
Model No. Description Input Voltage Output
PSC-AC-PP-200/C Dimming Power Pack for Fixture Mount with Connector 100-277VAC 12.5VDC
PSC-AC-PP-200* Dimming Power Pack for Fixture Mount 100-277VAC 12.5VDC
25
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
PSC-AC-PP-700C (Fixture Mount, with Relay)
Power Pack
Overview
Product Type Low Voltage Power Pack
Input Voltage 120-277VAC, 50/60Hz
Output Voltage 12VDC, 0~100mA
Max Load 10A @ 250V
Operating Temperature -40° C to 80°C
Storage Temperature -40° C to 80°C
Relative Humidity 10-95% non-condensing
Mounting Fixture Mount
Color Black
Wiring
Dimensions
How to order
Model No. Description Input Voltage Output
PSC-AC-PP-700C Low Voltage Power Supply for Fixture Mount w/ Relay 100-277VAC 12VDC
PSC -A C -PP -700C
120-277V (BLACK)
COM (WHITE)
V- (BLACK)
12V+ (RED)
GROUND (GREEN)
LOAD (BLUE) LOAD
MOTION HIGH (YLW)
(GREEN/YELLOW)
(BLUE/RED)
3.6 3“ (92.2 0m m )
1.0 1“ (25.6 0m m )
4.1 8“ (106. 17m m )
2-Ø0.1 7“ (2-Ø4.2m m )
3.1 8“ (80.7m m )
1.0 4“ (26.4m m )
Drawings are Not to Scale
4.18 in
3.63 in
3.18 in
1.01 in
1.04 in
2-Φ0.17 in
26
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
PSC-AC-PP-400 (Fixture Mount, No Relay)
Power Pack
Overview
Product Type Low Voltage Power Supply
Input 120-277VAC, 50/60Hz
Output 12VDC, 0~250mA
Max Case Temp Tc 90°C
Storage Temperature -40° C to 80°C
Relative Humidity 10-95% non-condensing
Mounting Fixture Mount
Color White
Wiring
Dimensions
How to order
Model No. Description Input Voltage Output
PSC-AC-PP-400 Low Voltage Power Supply for Fixture Mount 100-277VAC 12VDC
PSC -A C -PP -400
12V+ (RED)
V- (BLACK)
120-277V (BLACK)
COM (WHITE)
2.07 in
1.05 in
0.91 in
2-Ø0.14 in
2.37 in
2.64 in
27
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
OverviewSensor Type PhotoControl IR Filtered
Input 120VAC
Max Load 1200W Tungsten
1000VA Ballast
Photocell Turn On Level 10~20 Lux
Photocell Turn Off Level 30~60 Lux
Fail Mode On
Time Delay On 30-120 seconds
Time Delay Off 30-120 seconds
Operating Temperature -40° C to 70°C
Storage Temperature -40° C to 80°C
Relative Humidity 90-95% non-condensing at 30°C
IP Rating 54
Enclosure Material Polycarbonate
Color Black
Dimensions
Model No. Description Input Voltage Output/Max Load
PSC-OS-101 Photocontrol Switch Threaded Mount 120 VAC1200W Tungsten 1000VA Ballast
Photocontrol
Specifications: PSC-OS-101 (Threaded Mount)
Wiring
How to Order
3.31 in
1.26
in
1.90
in
0.81 in
28
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
OverviewSensor Type PhotoControl IR Filtered
Input 120-277VAC (PSC-OS-201)
347VAC (PSC-OS-202)
480VAC (PSC-OS-203)
Max Load 1000W Tungsten
1800VA Ballast
Photocell Turn On Level 16 Lux
Photocell Turn Off Level 24 Lux
Fail Mode On
Time Delay On 0-10 seconds
Time Delay Off 5-20 seconds
Surge Protection 546 Joules
Operating Temperature -40° C to 70°C
Storage Temperature -40° C to 80°C
Relative Humidity 90-95% non-condensing at 30°C
IP Rating 65
Enclosure Material Polypropylene
Color Blue
Dimensions
Photocontrol
Specifications: PSC-OS-2XX (Twistlock)
Model No. Description Input Voltage Output/Max Load
PSC-OS-201 Photocontrol Switch Twistlock 120-277VAC1000W Tungsten 1800VA Ballast
PSC-OS-202 Photocontrol Switch Twistlock 347VAC1000W Tungsten 1800VA Ballast
PSC-OS-203 Photocontrol Switch Twistlock 480VAC1000W Tungsten 1800VA Ballast
Wiring
How to Order
2.22
in
Dia 3.31in
29
-
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
How to Order
OverviewSensor Type PhotoControl IR Filtered
Input 120-277VAC
Max Load 1000W Tungsten
1200VA Ballast @ 120VAC
1800VA Ballast @ 208-277VAC
Photocell Turn On Level 16 Lux
Photocell Turn Off Level 24 Lux
Fail Mode On
Time Delay On 5 seconds
Time Delay Off 5 seconds
Operating Temperature -30° C to 70°C
Storage Temperature -30° C to 80°C
Relative Humidity 90-95% non-condensing at 30°C
IP Rating 65
Enclosure Material Polypropylene
Color Black
Dimensions
Model No. Description Input Voltage Output/Max Load
PSC-OS-301 Photocontrol Switch Flush Mount 120-277VAC1000W Tungsten 1200VA Ballast @ 120VAC1800VA Ballast @ 208-277VAC
Photocontrol
Specifications: PSC-OS-301 (Flush Mount)
Wiring
2.05 in
0.92
in
1.13 in 0.87 in
30
-
Sensors & Controls
LED Emergency Drivers
Stepdown Transformers
LED Drivers / Modules
Surge Protectors
HID Ballasts/Lamps
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
32
-
Photocontrols 24 months
Fixture Mount Occupancy Sensors
Ceiling Mount Occupancy Sensors
Wall Switch Occupancy Sensors
Power Pack
60 months
60 months
60 months
60 months
McWong International, Inc. | 1921 Arena Blvd., Sacramento, CA 95834, USA | (916) 371-8080 | www.McWonginc.com
33
-
Notes:
34
-
Notes:
35
-
Copyright© 2019 McWong International, Inc. Specifications subject to change without noticeV6.00