ip 67 lm 79 lm 80 linetm 1.5 interior/exterior … · line series 1.5 is available with four lumen...
TRANSCRIPT
Dim
ensi
ons
Applicationio Lighting’s line series 1.5 is approximately 1.5" in diameter. UL listed for wet locations, this IP67 rated LED-based linear floodlight produces luminous intensities for building facade and bridge accent illumination. Ideal for grazing, electrical feed “plug” connectors eliminate hardwire connections between fixtures, enabling ultimate flexibility for installation and replacement. Individual units may be placed end-to-end to create continuous rows without obvious shadows between fixtures. LEDs are similar to halogen light sources in that they are point sources that can reveal superior definition to textural surfaces and sparkle to reflective surfaces.
series 1.5 is a low voltage linear luminaire available in 12" and 18" lengths and may be daisy chained for continuous row mounted applications. Optional beam spreads along the perpendicular axis of the fixture include 10˚, 45˚, 65˚. Projected average rated life is 50,000 hours at 70% of lamp lumen output. Ambient temperature surrounding the fixture shall not exceed 122˚F (50˚C).
Light Outputline series 1.5 is available with four lumen outputs for white light only. All values below represent the initial raw lumens of the LED. IES format photometry of Lighting Facts labels represent actual light output measured in lumens and candle power. Light Output losses include optical, thermal and power supply inefficiencies. IES LM-79 format files may be obtained from the factory or downloaded from www.iolighting.com. All products have a CRI greater than 80. Results are typical measurements. >> 3-step MacAdam Binning.
ConstructionThe light weight, yet durable extruded aluminum housing provides recommended heat sink requirements for LEDs. Patented precision optic assembly is composed of a customized acrylic material that offers very high transmissivity, UV stability, and excellent longevity.
Electrical8'-0" 18 AWG, 300 volt rated power cords are supplied with plug connector. Injection molded end cap is designed to receive both the plug electrical connector or an interconnect for daisy chaining. For detailed information regarding daisy chain limitations, remote distance limitations, power supply options, and dimming options consult the io website (www.iolighting.com) or an io representative.
FinishAnodized aluminum finish is standard. Custom finishes may be available upon request.
lineTM 1.5
1.67"(42.4 mm)
1.50"(38.1 mm)
.95"(24.1 mm)
BendingRadius
1.64"(41.7 mm)
CL
Label references 18" line 1.5 fixture with a 45˚ beam spread in Very High Output 3000K. Lighting Facts for additional beam spreads and light output levels may be obtained from io Lighting.
io line 1.5 3KHO
12612.3
10
76
3161 (Bright White)
6PRA-TMDFKX
0.10.E.3KHO.45.1.18
Other
UPDATED
PERFORMANCE SPECS COMING SOON!
5-year warranty
INTERIOR/EXTERIOR APPLICATIONS
IP 67 LM 79 LM 80
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Standard Output
72 lms/ft81 lms/ft83 lms/ft88 lms/ft
1.02 w/ft
Mid Output
181 lms/ft203 lms/ft206 lms/ft218 lms/ft
2.54 w/ft
High Output
253 lms/ft284 lms/ft289 lms/ft307 lms/ft
3.81 w/ft
2700K White:3000K White:3500K White:4000K White:
Very High Output
362 lms/ft406 lms/ft413 lms/ft438 lms/ft
5.08 w/ft
InItIal lumens
Power ConsumPtIon*
Non-standard color temperatures available as a custom offering for a modest additional cost and lead-time.* Power Consumption dos not include power supply losses.
18'-0" (5.5m) w/18 AWG46'-0" (14.0m) w/14 AWG 71'-0" (21.6m) w/12 AWG
DrIVer remote DIstanCe
V: 11_04_14
line 1.5 applications youtube.com/iolighting
FC Dist.90°
75°
60°
45°
30°15°
C.P. Distribution F.C. / Dist.
3K HO 10 Degree
90°
75°
60°
45°
30°15°
C.P. Distribution F.C. / Dist.
3K HO 45 Degree
90°
75
°
60°
45°
30°15°
C.P. Distribution F.C. / Dist.
3K HO 65 Degree
63.6
20.9
9.9
5.7
3.8
2'
4'
6'
8'
10'
FC Dist.
19.0
4.8
2.1
1.2
0.8
2'
4'
6'
8'
10'
FC Dist.
15.7
4.6
2.1
1.2
0.8
2'
4'
6'
8'
10'
30
60
90
100
250
400
30
60
90
FC Dist.
63.6
20.9
9.9
5.7
3.8
2'
4'
6'
8'
10'
30˚15˚400
250
100
45˚
60˚
75˚
90˚
C.P. Distribution F.C. / Dist.
FC Dist.
19.0
4.8
2.1
1.2
0.8
2'
4'
6'
8'
10'
30˚15˚90
60
30
45˚
60˚
75˚
90˚
C.P. Distribution F.C. / Dist.
FC Dist.
15.7
4.6
2.1
1.2
0.8
2'
4'
6'
8'
10'
30˚15˚90
60
30
45˚
60˚
75˚
90˚
C.P. Distribution F.C. / Dist.M
ount
ing
Optio
ns
0 10 E
io 1 2 3 4 5 6 7 8 9 10 11
line series 1.5 is not rated for submersible applications. line 1.5 should not be mounted in conditions where there is any standing water whatsoever.Set screw locks fixture into place.
2X ø.144(For #6 screw)
L1.bk.adj
1. LIGHT OUTPUT10 1.5 SO, MO, HO or VHO
2. LOCATIOnE Exterior
3. COLOR27K White 2700K SO(1)
27KMO White 2700K MO(1)
27KHO White 2700K HO(1) 27KVHO White 270 0K VHO(1)
3K White 3000K SO(1)
3KMO White 3000K MO(1)
3KHO White 3000K HO(1)
3KVHO White 3000K VHO(1)
35K White 3500K SO(1)
35KMO White 3500K MO(1)
35KHO White 3500K HO(1)
35KVHO White 3500K VHO(1)
4K White 4000K SO(1)
4KMO White 4000K MO(1)
4KHO White 4000K HO(1)
4KVHO White 4000K VHO(1)
CC Custom Color(2)
4. DISTRIbUTIOn10 10 Degree45 45 Degree65 65 Degree
5. MOUnTInG100 Surface mount103 Vertical mount**Note: For vertical mount applications, one (1) surface mount bracket and one (1) vertical mount bracker per fixture.
6. FInISH1 Anodized aluminum2 Anodized custom color
7. LEnGTH ACTUAL (in/mm)12 12" (12.68"/322.07mm)18 18" (18.34"/465.83mm)FOR CONTINUOUS ROWSpecify length (e.g., 96'-0")Note: Overall length must be divisible by 18.34" or 12.68"
8. ELECTRICAL FEED2 End feed3 Right side feed4 Left side feed5 6" interconnects left side and right side feedsNote: For straight continuous rows fed by one driver, interconnects shall be supplied as required.
9. VOLTAGE / DIMMInG1 120v2 277v3 120v w/dim4 277v w/dim5 Other (International voltage)
10. SPECIFy DRIVER / DIMMInGNote: If not specified otherwise, io will supply 100 watt drivers. Download Power Supply specification sheet from www.iolighting.com.
11. CE Available upon request.
Orde
r Co
de
1. White light variance between LEDs is equal to or better than 3-step MacAdam Binning.2. Non-standard color temperature and CRI are available. Consult factory for availability.
Foot
note
s
Note: All plug connectors are field interchangeable.
18" 3KHO 10 DEGREE
Note: line 1.5 may be rotated within the bracket for field adjustable aiming.
1.50"(38.1 mm) .75" (19 mm)
Note: Architectural detail MUST allow for access to set screws to ensure stable mounting condition.
Surface Mount Vertical Mount38˚ Total
19˚
lineTM 1.5
2. END FEED 3. RIGHT SIDE FEED 4. LEFT SIDE FEED RIGID INTERCONNECTOR 6" INTERCONNECTRIGID INTERCONNECT PLUG(for daisy chaining – requires a LEVEL mounting surface)
(for continuous row mounting)
Lig
ht O
utpu
t / D
istr
ibut
ions
Elec
tric
al F
eed
Optio
ns
LIGHT OUTPUT CONVERSION TABLE
3000K S.O. 5000K S.O. 5000K H.O.3000K H.O.
0.22(1) 1.09(1)0.24(1)1.0(1)
3000K M.O.
0.66(1)
5000K M.O.
0.72(1)
RED GREEN AMBERBLUE
0.53(2) 0.51(2)0.51(2) 0.30(2)
RED GREEN AMBERBLUE
0.53(2) 0.51(2)0.51(2) 0.30(2)
2700K S.O. 2700K H.O.
0.19(1) 0.88(1)
2700K M.O.
0.57(1)
StandardOutput
MidOutput
HighOutput
Very HighOutput
2700K White
3000K White
3500K White
4000K White
5000K White
0.27(1)
0.29(1)
0.73(1)
0.78(1)
1.39(1)
1.54(1)
1.00(1)
1.06(1)
0.29(1) 0.78(1) 1.49(1)1.06(1)
0.32(1) 0.87(1) 1.59(1)1.19(1)
0.25(1) 0.69(1) 1.30(1)0.94(1)
Note: Visit www.iolighting.com or contact an io representative for IES format photometrics.
ELECTRICAL FEED "PLUG" CONNECTORS"PLUG" CONNECTORS FEED
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com V: 11_04_14
io L
ight
ing
rese
rves
the
right
to m
odify
the
desi
gn o
r pe
rfor
man
ce o
f our
pro
duct
s at
any
tim
e.