ipmen glass filled nylon and metalbreathersretem.com/pictures/parker accessories[1].pdf ·...
TRANSCRIPT
Reservoir Equipment
Glass-Filled Nylon and Metal BreathersIP65 Rated, Metal, Screw-on and Lockables
Reservoir equipment183
Reservoir Equipment
IP65 Rated Filler Breathers
Option 1 Filler Breathers (Single Hole Installation)
Specification for Single and 6 Hole Installation
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 25
184
Option 1
Construction:Moulded in non-corrodibleglass-filled nylon combiningstrength with a lightweightdesign.
Options:(1) single (63mm dia) holeFiller breather installation thateliminates drilled and tappedholes using self-lockingclamps.(2) 6 holeFiller Breather Installationthat uses 6 x No 10 threadforming screws.(3) 3 hole filler breatherutilises 3 x zinc and clearchromate plated steelscrews.
Strainers:Unique design diffuses oilflow into the reservoir.(1) Single length inpolypropylene (95mm length)(2) 2-piece telescopic inpolypropylene (195mm lengthmax.)
Filtration element:Expanded polyurethanefoam, 10 micron nominal.
Seals:Nitrile.
Working temperature:-30°C to +90°C.
Pressurised filler breathers:Available in 3 pressureoptions to maintain a positivepressure in a reservoir.
Pressurisation options:0.2, 0.35 and 0.7 bar crackpressure.
Pressurisation valve:Nylon/Nitrile.
Dipstick:Available for use with options1 and 2. Dipsticks areavailable in 2 lengths and inpacks of 10.
Dipstick material:ABS.
Hi/Lo indicators:Acetal. Adjustable Red/Greenlevel indicators.
Dipstick lengths:200mm and 400mm.
Breather weight:0.2Kg.
Anti-splash feature:The unique design anti-splash feature is standardon all options 1 and 2 andallows for a dipstick to befitted if required.
0 5 10 15Flow I/sec (Air)
1.0 0.7 Valve
0.2 Valve
0.35 Valve
1.2
0.8
0.6
0.4
0.2
0
16.9
14.6
11.6
2.9
0
5.8 Δp(P
SID
)
7.3
0 5 10 15Flow I/sec (Air)
Without Anti-Splash
With Anti-Splash
0.20
0.15
0.10
0.05
0
0.25
2.9
0
1.5 Δp(P
SID
)
Option 1. Single Hole Filler Breathers – Non-Pressurised
Option 1. Single Hole Filler Breathers – Pressurised
AB98XXX Pressurised Pressure Drop Curves
AB98XXX Non-Pressurised Pressure Drop Curves
Ø101
Ø42
70
167
Ø7.0
A
A
10m
ax
Part numberAB98212011AB98213011AB98212001AB98212021AB98213001AB98213021AB98217001AB98217011AB98217021
SupersedesAB.98212011.UCAB.98213011.UCAB.98212001.UCAB.98212021.UCAB.98213001.UCAB.98213021.UCAB.98217001.UCAB.98217011.UCAB.98217021.UC
Description 10µ nomPressurised 0.2bar with 95mm strainerPressurised 0.35bar with 95mm strainerPressurised 0.2bar without strainerPressurised 0.2bar with telescopic strainerPressurised 0.35bar without strainerPressurised 0.35bar with telescopic strainerPressurised 0.7bar without strainerPressurised 0.7bar with 95mm strainerPressurised 0.7bar with telescopic strainer
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Part numberAB98210011AB98210021AB98210001
SupersedesAB.98210011.UCAB.98210021.UCAB.98210001.UC
Description 10µ nomFiller breather with 95mm strainerFiller breather with telescopic strainerFiller breather without strainer
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Reservoir equipment
Filler Breathers (6 Hole Installation)
185
Option 2
Note 1. Un-pressurised 6 hole fixing:
Form 6 off tank mounting holes between Ø4.0 and 4.4mm (dependent on the material and thickness – see guide below)equispaced on 70-73mm P.C.D. to suit supplied No.10 thread forming screws.
Note 2. Pressurised 6-hole fixing:
Form 6 off tank mounting holes between Ø4.0 and Ø4.4mm (dependent on the material and thickness – see guide below)equispaced on 73mm P.C.D. to suit supplied No.10 thread forming screws.
Note 3. Reservoir mounting guide
Sheet thickness mm Hole size mm1.2 4.02.0 4.103.15 4.304.0 4.305.0 4.40
Option 2. 6 Hole Filler Breathers – Non-Pressurised
Option 2. 6 Hole Filler Breathers – Pressurised
Telescopic Strainer
The telescopic strainer designis ideal, where reservoir depthallows, to increase the surfacearea of the strainer, improvingstill further its straining ability,oil flow-through and allowing forlonger dipstick lengths.
Ø101
Ø42
167
72
A 73 70
6x Ø 4.44.0
Ø101
Ø42
271
72
Ø31
Part numberAB98810001AB98810011AB98810021
SupersedesAB.98810001.UCAB.98810011.UCAB.98810021.UC
Description 10µ nomFiller breather without strainerFiller breather with 95mm strainerFiller breather with telescopic strainer
Part numberAB98817011AB98812001AB98812011AB98812021AB98813001AB98813011AB98813021AB98817001AB98817021
SupersedesAB.98817011.UCAB.98812001.UCAB.98812011.UCAB.98812021.UCAB.98813001.UCAB.98813011.UCAB.98813021.UCAB.98817001.UCAB.98817021.UC
Description 10µ nomPressurised 0.7bar with 95mm strainerPressurised 0.2bar without strainerPressurised 0.2bar with 95mm strainerPressurised 0.2bar with telescopic strainerPressurised 0.35bar without strainerPressurised 0.35bar with 95mm strainerPressurised 0.35bar with telescopic strainerPressurised 0.7bar without strainerPressurised 0.7bar with telescopic strainer
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Reservoir Equipment
Filler Breathers
Dipstick Options
Option 3 Filler Breathers (3 Hole Installation)
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 25
186
Note: Form 3 off tank mounting holes between Ø4.0 and Ø4.4mm (dependent on thematerial and thickness – see chart for guide) equispaced on 41.3 P.C.D. to suit No.10 thread forming screws supplied.
4663
.5
Ø24
Ø50
.5
Ø53
A 41.3
3x Ø 4.44.0
3-hole Filler Breathers (6-hole available)
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.Note 3: Not suitable for use with B.68206/207Note 4: 6-hole AB.68910/AB.68918 option available.
Dipsticks
The dipstick, available in 2 lengths – 200mm and 400mm,can be cut to the required length or left as it is and the Hi/Loindicators moved and positioned on the dipstick itself bysqueezing the sides of the indicator and repositioning alongthe dipstick.
New Options Fully Tested
As part of the design developmentprogramme for the new IP65 FillerBreathers, extensive performance andendurance testing was carried out toensure durability and efficiency.
Part numberAB68110AB68118
Description 10µ nom
Filler breather without strainerFiller breather with 95mm strainer
Part numberB68206B68207
SupersedesDIP.206DIP.207
Description10 x 200mm Dipsticks10 x 400mm Dipsticks
Dipstick Ordering
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Reservoir Equipment
Screw-On Type Air Breathers
Reservoir equipment
Pressure Drop Flow Curve
Standard Screw-On Breathers - Specification
187
Option 1– G1/2 and G3/4 (Ø101)
0 5 10 15Flow I/sec (Air)
Δp(b
ar)
0
0.30
0.25
0.20
0.15
0.10
0.05Without Anti-Splash
With Anti-Splash
4.4
1.5
0
2.9
Δp(P
SID
)
Note: For pressure drop information on the Option 1. Pressurised consult Parker Filtration.
AB98XXX Screw-on Non-Pressurised Pressure Drop CurvesG1/2
G3/4
Ø101
Ø101
G1/2
G3/4
30 A/F HEX
93
1310
96
1610
A
A
30 A/F HEX
Construction:Moulded in non-corrodible glass-filled nyloncombining strength with a lightweight design.
Option 1:2 screw on type air breathers are available– G1/2 or G3/4 threaded base models.
Filtration element:Expanded polyurethane foam, 10 micronnominal.
Seals:Nitrile.
Working temperature:-30°C to +90°C.
Pressurised air breathers:Available in 3 pressure options to maintain apositive pressure in a reservoir.
Pressurisation options:0.2, 0.35 and 0.7 bar crack pressure.
Pressurisation valve:Nylon/Nitrile.
Dipstick:Available for use with all options. Dipsticksare available in 2 lengths and in packs of 10.
Dipstick material:ABS.
Hi/Lo indicators:Acetal. Adjustable red/green level indicators.
Dipstick lengths:200mm and 400mm.
Breather weight:0.2Kg.
Anti-splash feature:The unique design anti-splash feature isstandard on option 1 and allows for adipstick to be fitted if required.
Option 1 – G1/2 or G3/4
Part numberAB98610101AB98612101AB98613101AB98617101AB98410101AB98412101AB98413101AB98417101
SupersedesAB.98610101.UCAB.98612101.UCAB.98613101.UCAB.98617101.UCAB.98410101.UCAB.98412101.UCAB.98413101.UCAB.98417101.UC
Description 10µ nomG1/2 Un-pressurisedG1/2 pressurised 0.2 barG1/2 pressurised 0.35 barG1/2 pressurised 0.7 barG3/4 Un-pressurisedG3/4 pressurised 0.2 barG3/4 pressurised 0.35 barG3/4 pressurised 0.7 bar
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Reservoir Equipment
Screw-On Type Air Breathers
Pressure Drop Flow Curve Ordering Information
Compact Screw-On Breathers - Specification
Construction:G1/4, G3/8, R1/2 and R3/4 cap and base plate mouldings in nylon 66.
Element:Expanded Polyurethane foam, 10 micron nominal.
Dipstick:Available for use with R1/2 and R3/4.
Dipstick material:ABS.
Hi/Lo indicators:Acetal adjustable red/green level indicators.
Dipstick lengths:200mm and 400mm (packs of 10).
Breather weights:0.028Kg
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 25
188
Option 2 – G1/4, G3/8, R1/2 and R3/4 (Ø40)
Flow I/sec (Air)
0.20
0 0.5
Δp(b
ar)
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
01.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
G1/4219
115
0
Δp(P
SID
)
Ø40
Ø40
Ø40
Ø40
5760 60
59
6
912
.5
1413
.59
G1/4
R1/2
20 A/F HEX
20 A/F HEX
20 A/F HEX G3/8
R3/4
20 A/F HEX
914
G1/4 G3/8
R1/2 R3/4
Note: For pressure drop information on G3/8, R1/2 and R3/4, consult Parker Filtration.
Option 2 – G1/4, G3/8, R1/2 and R3/4 (Packs of 10 only)Part number
AB683101AB68X101AB68Y101AB68Z101
SupersedesAB.683101.UCAB.68X101.UCAB.68Y101.UCAB.68Z101.UC
Description 10µ nomG1/4 Un-pressurisedG3/8 Un-pressurisedR1/2 Un-pressurisedR3/4 Un-pressurised
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Reservoir equipment
Pressure Drop Flow Curve Ordering Information
Screw-On Type Air Breathers - Specification
189
Construction:Mouldings in glass-filled nylon and glass coupled polypropylene.
Element:Expanded Polyurethane foam, 10 micron nominal.
Seals:Nitrile.
Pressurised air breathers:Available G3/8, G1/2 and G3/4,3 pressure options to maintain a positive pressure in a reservoir.
Pressurisation options:0.2, 0.35 and 0.7 bar crack pressure.
Pressurisation valve:Nylon.
Dipstick:Available for use with G3/8, G1/2 and G3/4.
Dipstick material:Mini-series in brass.
Hi/Lo indicators:Acetal adjustable red/green level indicators.
Dipstick lengths:200mm and 400mm (packs of 10).
Breather weights:0.075Kg, Mini-series – 0.019Kg.
Option 3 – G3/8, G1/2 and G3/4 (Ø70)
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0 5 10 15 20 25Flow I/sec (Air)
Δp(b
ar)
G3/8
G1/2
G3/4
0
G3/8 G1/2
G3/4
Ø70 Ø70
Ø70
68 68
71
G3/8 G1/2
G3/4
8.5
8.5
12.5
8.5
12.5
15.5
28 A/F HEX 28 A/F HEX
31 A/F HEX
A
A
The mini-series breather
Screw-on option Push-fit optionØ20
36
20
15°30°
1.6
Ø13.55Ø13.35
Ø22 Spotface
7.8
10.5 m
in
Ø16.2516.00
Ø15.1015.00
Ø11.8G1/4
Option 3 – G3/8, G1/2 and G3/4
Part numberAB685101AB687101AB686101
SupersedesSAB.5101SAB.7101SAB.6101
Description 10µ nomG3/8 Un-pressurisedG3/4 Un-pressurisedG1/2 Un-pressurised
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Part numberS680003
Description
Gearbox air breather
Part number Supersedes Replacement cap Supersedes DisplacementI/min
Reservoir Equipment
Filler Breathers (Metal)
Ordering Information
Metal Airbreather/Filler breather Specification
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 26
190
Locking lugoption (5561)
For addedsecurity, certainParker FiltrationMetal FillerBreather Filterscan be specifiedwith a lockinglug option.
Ø83
Ø76.2
43.4
58.2
153.
5
Ø49.5
Crackpressure
Micronrating
Air flowm3/min
Thread Weight
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Threaded airbreather (unpressurised)
Filler breather - filter flange type (unpressurised)
Filler breather - filter flange type (pressurised)
Air breather - threaded type (pressurised)
SAB156210SAB156310
AB116310AB138010
5561
PAB1730105PAB17301010
SPA1731105SPA17311010
SAB.1562.10SAB.1563.10
AB.1163.10AB.1380.10
N/A
PAB.1730.10.5PAB.1730.10.10
SPA.1731.10.5SPA.1731.10.10
N/AN/A
CAP.116310CAP.138010
N/A
CAP.1730105CAP.17301010
N/AN/A
N/AN/A
CAP.1163.10CAP.1380.10
N/A
CAP.1730.10.5CAP.1730.10.10
N/AN/A
430135
430135430
430430
430430
N/AN/A
N/AN/AN/A
0.35 bar0.70 bar
0.35 bar0.70 bar
10µ nom10µ nom
10µ nom10µ nom10µ nom
10µ nom10µ nom
10µ nom10µ nom
0.450.15
0.450.150.45
0.450.45
0.450.45
G3/4
G1/4
N/AN/AN/A
N/AN/A
G3/4
G3/4
0.20kg0.06kg
0.24kg0.08kg0.24kg
0.27kg0.27kg
0.20kg0.20kg
Reservoir equipment
Breather Units Ordering Information
191
1731 - Threaded type (Pressurised)Displacement:430 l/min.
Micron rating:10µ nominal
Air flow:0.45m3/min.
Weight:0.2 Kg.
Thread:G3/4.
Valve crack-pressure:0.35 and0.7 bar.
Displacement:1562 = 430 l/min.1563 = 135 l/min.
Micron rating:10µ nominal
Air flow:1562 = 0.45m3/min.1563 = 0.15m3/min.
Weight:1562 = 0.20 Kg.1563 = 0.06 Kg.
Thread:1562 = G3/4.1563 = G1/4.
1562-1563 - Threaded type (Un-pressurised)
Displacement:135 l/min.
Micron rating:10µ nominal
Air flow:0.15m3/min.
Weight:0.08 Kg.
1380 - Filter flange type
Tank installation notes1. Un-pressurised 6 hole fixingForm off tank mounting holes betweenØ4.0 and Ø4.4 (dependant on the materialand thickness, consult Parker Filtration)equispaced on 70.0-73.0 P.C.D. to suitNo. 10 thread forming screws supplied.
2. Pressurised 6 hole fixingForm 6 off mounting holes betweenØ4.0 and Ø4.4 equispaced on 73.0P.C.D. to suitNo. 10 thread forming screws supplied.
3. Un-pressurised 3 hole fixingForm 3 off tank mounting holesbetween Ø4.0 and Ø4.4 equispaced on41.3 P.C.D. to suitNo. 10 thread forming screws supplied.
35 A/F HEX
Ø76.2
G3/4
65
16
43.4
6
16 A/F HEX
G1/4/G3/4
Ø44.5
56.5
13
36.5
7
Ø44.5
36.5
110
47
Ø51
Ø35
22
5
Three size:1/4” BSPT3/8” BSPT1/2” BSPT
Small BreatherSpecification
Part numberH00279001H00279002H00279003
SupersedesH00279-001H00279-002H00279-003
DescriptionSmall breather 1/4 BSPT threadSmall breather 3/8 BSPT threadSmall breather 1/2 BSPT thread
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 26
192
Flow (l/min)
Δp(b
ar)
10µ
0 500 1000 1500 20000
0.02
0.04
0.060 132 264 528
Flow (US GPM)
3940.87
0.58
0.29
0
Δp(P
SID
)
Tank Mounting
Stand Pipe Mounting
Total assembly pressure drop flow curve – 10µ elements
Ø51Strainer
3 off equispaced clamps
51.5
107
Ø 7876
Tank mounting hole
107
34
6881
149
X
Y
Z
141A
B
50.5
Flap to protect lock
2 locking screws threaded type at positionsX and Y3 locking screws push on type at positionsX, Y and Z
Ordering Information
Reservoir Equipment
Lockable Filler BreatherInstallation Details
Lockable Filler Breather Selection
Part number
LFC622142LFC622212LFC622242LFC622432LFC622122LFC622222LFC622411
Description
Non-breathing (No element) Clamp mounting with strainer10µ nom element, G2 thread with strainer10µ nom element, clamp mounting with strainer10µ nom vented (air in) push on mounting with strainerNon-breathing (No element) 2” BSP thread with strainer10µ nom element, G21/2 thread with strainer10µ nom vented (air in) G2 thread without strainer
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Reservoir Equipment
Spin-On Air Breathers
Reservoir equipment193
Reservoir Equipment
Spin-On Air Breathers
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 27
Ordering Information
Specification
194
High capacity air breathers designed for the removal of airbornecontamination in hydraulic systems to support environmentalmaintenance.Ideal for high flow systems and heavily contaminatedenvironments.Disposable spin-on elements quickly and easily replaced.5 micron nominal quality filtration elements.2 models available – 700 l/min and 1500 l/min.Available with a pressurised valve in the mounting adaptor.
Note: Spin-on air breather elements canalso be mounted directly on to any suitablelength of 3/4” BSP threaded pipe.
5µ Spin-on air breathers
Circuit symbol(standard)
Circuit symbol(pressurised)
Ø94
A
B
60
6
Ø97
A
B
Ø51
Ø63
.5
Standard spin-on air breather stem
Pressurised spin-on air breather stem
Reservoir cutout Ø25 maximum
Reservoir cutout Ø25 maximum
3 off M6 fixing holesequispaced on 41.3 P.C.D.
3 off M6 fixing holesequispaced on 50 P.C.D.
Part number Supersedes Air flow Valve crackpressure
A mm
S340056S340052S340058S340059S340054S340055
B mm Weight Replacementelement
N/AN/A
*S.340058**S.340059*S.340054**S.340055
700 l/min1500 l/min700 l/min700 l/min1500 l/min1500 l/min
UnpressurisedUnpressurised
0.35 Bar0.70 Bar0.35 Bar0.70 Bar
601486060148148
120208120120208208
0.6Kg0.75Kg0.69Kg0.69Kg0.8Kg0.8Kg
493058841049304930
588410588410
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.Note 3: Reservoir must be capable of withstanding pressurisation.
Ordering Information
Reservoir equipment195
High capacity air breathers and filler/breathers designed for theremoval of airborne contamination in hydraulic systems to supportenvironmental maintenance.Ideal for high flow systems and heavily contaminated environments.Disposable spin-on elements quickly and easily replaced.3 micron absolute quality filtration elements.Models available – 1700 l/min and 3000 l/min.
Large breather dimensions Large breather filler dimensions
Mounting face for standard and large breather
Maximum operating temperature:-20°C to +90°C.
Construction materials:Epoxy coated steel components to resist corrosion.resistant paint finish on large breathers.
Fluid compatibility:Suitable for use with mineral oils and water oil emulsions.
Weights:Large: H00834001 1.0 Kg
H00834002 1.65 KgH00834003 1.90 Kg
Each breather filler is supplied with mounting gaskets andself-tapping screws.
73 PCD Ø57 hole in tank
6 fitting holesØ5.6 equispacedon 73 PCD
Ø88 boss or spot face(1.6 micron surface finish)
ØA
B C
D
E BSPT
ØA
B
C
Ø48
Large breather filter
Strainer 30 mesh(600 microns)
Specification
Part number Supersedes Air flowl/min
Dimensions (mm) Ports
H00834004H00834005
H00834-004H00834-005
17003000
97134
147198
135180
3036
3/4
11/4
Partnumber
Supersedes Air flowl/min
Dimensions (mm) Replacementelement complete
with bayonetH00834001H00834002H00834003
H00834-001H00834-002H00834-003
170030003000
97134134
165204204
114114203
A B CH00834006H00834007H00834007
Supersedes
H00834-006H00834-007H00834-007
A B C D
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
Parker HannifinHydraulic Filter Division EuropeFDHB200UK.
196
Notes
Reservoir Equipment
Fluid Level MeasurementFluid Level Temperature Gauges
Reservoir equipment197
Reservoir Equipment
Fluid Level/Temperature Gauges
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 28
Size 1 Installation Details
Installation and Application Information
Size 1 Ordering Information
Specification
198
For ‘through hole’ mounting:
–Thread–Hole size M10 M12Preferred 11.0 13.0Maximum 13.0 14.0
For tapped holes:
Holes to be tapped square to mounting face.Tolerance on hole centres: +0.5
-0.2
For welded back nuts:
The above details should be combined.
Simple to Install
The universal fixing is designed for either front or rear fixing.Just two holes in the tank – threaded for front fixing – and thegauge is ready to install. After positioning the gauge the boltsare simply tightened to provide a secure seal. There is no fearof leakage with the square section seals and the two-pointmounting system eliminates problems with tank distortion.M10 and M12 bolt thread options are available.
Easy to Read
The high-visibility lens is one-piece for added security andmoulded in shatterproof, transparent polyamide for anaccurate and clear oil level and temperature indication. Furthergauge protection is provided by a specially designed shroudmoulded in high-impact, black polystyrene.
Construction:Lens Transparent polyamide.Lens base Nylon 66.Shroud High impact polystyrene.
No aluminium content.
Bolts:Steel.
Seals:Nitrile.
Maximum working pressure:1 bar.
Working temperature:-30°C to +90°C.
Fluid compatibility:Mineral and petroleum based oils.
Note:A 500mm model with metal shroud finishedin black available.
Recommended bolt tightening torque:10 Nm maximum.
Thermometer scale range:+30°C to +90°C.
Temperature Indicator:Blue alcohol.
Note:1. Locate seals in mounting recess before
fitting.2. Select the size required by studying the
installation details to determine a partnumber.
Driveslot
Blackline
Redline
43
41.5
3018
110
7617
17A
/FH
EX
18.5 24
Part number
FL69121FL69123FL69111FL69113
Supersedes
FLT.121FLT.123FL.111FL.113
Desciption
Fluid level/tempFluid level/temp
Fluid levelFluid level
Centres
76mm76mm76mm76mm
Thread
M10M12M10M12
Max temp
90°C90°C90°C90°C
Weight
0.13Kg0.13Kg0.13Kg0.13Kg
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Reservoir equipment199
Size 2 Ordering Information
Size 3 Ordering Information
Size 2 Installation Details
Drive slot
Black line
Red line
2418.5
41.5
1712
7
161 A
/FH
EX
177422
43
Drive slot
Blackline
Redline
2418.5
41.5
1725
428
8
A/F
HE
X17
202
22
43
Size 3 Installation Details
Part number
FL69221FL69223FL69211FL69213
Supersedes
FLT.221FLT.223FL.211FL.213
Desciption
Fluid level/tempFluid level/temp
Fluid levelFluid level
Centres
127mm127mm127mm127mm
Thread
M10M12M10M12
Max temp
90°C90°C90°C90°C
Weight
0.15Kg0.15Kg0.15Kg0.15Kg
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Part number
FL69321FL69323FL69311FL69313
Supersedes
FLT.321FLT.323FL.311FL.313
Desciption
Fluid level/tempFluid level/temp
Fluid levelFluid level
Centres
254mm254mm254mm254mm
Thread
M10M12M10M12
Max temp
90°C90°C90°C90°C
Weight
0.23Kg0.23Kg0.23Kg0.23Kg
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Parker HannifinHydraulic Filter Division EuropeFDHB200UK.
200
Notes
Reservoir Equipment
Reservoir Float &Level Switches
Reservoir equipment201
Reservoir Equipment
FL SeriesAdjustable Float Switch
Typical Specification Installation Drawing
Ordering Information
Features & Benefits
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 29
202
Float Switch Features Include:Float switches can be adjusted on siteReliable design using reed switches3 lengths available, 500mm, 1000mm and1500mm
HEX 36 A/F
46 56 69 77
1” BSPP thread
Polypropylene floatØ28.5
Cus
tom
erA
djus
tabl
e
35ap
prox
InstallationMounting: 1” BSP threaded headerGasket: 2.0mm thick sealing washerLength: Adjustable up to 1500mm
Electrical specificationSupply voltage: 240 Vac maximum
300 Vdc maximumSwitching current: 0.5A
Thermostat ratingsNormal voltage: 250VCurrent rating: 4A (10A max)
Material specificationHeader: Brass Stem: BrassFloat: Polypropylene Gasket: Klingersil grade C4324
to BS7531 grade Y
Other parametersFluid types: Any liquids compatible with brass and
polypropylene
The FL Series is a range of vertically mounted, single floatlevel switches operating on the proven reed switch andmagnet principle.
The FL Series float switch can be tailored by the user fora particular application, by adjusting the length of the floatswitch tube. It is also possible for the user to select theswitching configuration by inverting the float, giving eitheropen on rise or close on rise operation.
The unit is supplied part assembled, with detailed instructionsfor the user to complete assembly to the specifications of theapplication and to install the unit.
The FL Series is designed to be adjusted by the user to fittheir tank. The unit consists of a stem with the reed switch,thermal switch (if fitted) and float already set in position. Thecustomer can cut the stem to fit their tank, and assemble it tothe header. The unit is then ready to be fitted to the tank.
The unit has a factory set “Open On Rise” switchingconfiguration, but this can be changed by reversing the float.The common temperature switches used are 60°C “Open OnRise” or 60°C “Close On Rise”. However, other temperaturespecifications may be obtained on request. A standard DIN43650 connector is supplied with the unit.
Part number
FL050010RFL100010RFL150010R
Supersedes
FL-0500-1-0RFL-1000-1-0RFL-1500-1-0R
Desciption
500mm long float level switch1000mm long float level switch1500mm long float level switch
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Technical Specification
Reservoir Equipment
CLS46Capacitive Level Switch
Reservoir equipment
Installation Details
Features & Benefits
203
1/4” NPTF,1/2” NPTF or 1/2” BSPT
thread
34
15.2
15
56.5
24.5
3
20.1
12.7
1.39” acrosscorners
(HEX 1.2” A/F)
12.6
Dimensions: See drawing
Electrical rating:Supply voltage: 7-40 Vdc Supply current: 3.0mAMax. load current: 1.0A Alarm delay time: 10.0 seconds
Connections:V+: Positive power supplyGND: Negative power supply or GNDOutput: Transistor switched to GND on alarmTest: Ground to operateBody: Connected to ground
Fluid types:Water based fluids compatible with brass, PTFE and flurosilicone
Construction:Body: Brass Probe: PTFETerminals: SAE CA210 brass, tin platedSeals: FlurosiliconeConnector: 30% glass filled nylon 6Environmental ratingsMax. pressure: 5.0 bar (72 PSI)Temp. ranges: Fluid: -40°C to +130°C
Ambient: -40°C to +100°CStorage: -50°C to +140°C
Sealing: IP67Vibration: 6g 10-50Hz (600-3000rpm)Shock: 50g, 6.3mSWeight: 53g
Features Include:Rugged constructionSimple to installDelay circuitry prevents false alarmsPurely electronic, no moving componentsIntegrated test feature
The CLS46 Liquid Level Switch is an active device which isdesigned to give an alarm signal if fluid falls below a preset level.It will only give an output signal after a few seconds of low level toeliminate false alarms due to turbulence. The fact that the CLS46Series has no moving parts and incorporates a built in delaymeans that it is ideal in applications where mechanically operatedswitches mis-trigger due to vibration and fluid turbulence.
The CLS46 Capacitive Level Switch is designed to detectthe loss of fluid below its position in the tank.
The CLS46 Series has no moving parts and it is thereforesuitable for all applications, particularly where space andaccess inside a vessel is at a minimum.
The CLS46 Series compliments the existing range of levelmeasurement instrumentation supplied by Parker Hannifin.
Ordering Information
Part numberCLS46
CLS46Connector
DesciptionCapacitive fluid level sensor
Capacitive fluid level sensor connector
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Reservoir Equipment
Fluid Power Products
Hydraulic system protection from Parker is further confirmed with a quality range of fluid power products that include suctionstrainers, check valves pressure gauges and a pipe clamping system that will ensure secure pipe installations.
For information on Parker Filtration products and technology:Tel: +44(0)1924 487000 Fax: +44(0)1924 487001 Email: [email protected]
204
Reservoir Equipment
Suction Elements
Reservoir equipment205
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 30
206
Reservoir Equipment
Suction Elements
Installation - Suction Elements Without Bypass Installation - Suction Elements with Bypass
Specification
A
ØB
Circuit symbol
C A/F HEX
Mounting thread
Circuit symbol
A
ØB
C A/F HEX
Mounting thread
Construction:Stainless steel media 30% glass filled nylonhead. Zintec centre tube.Epoxy adhesives.
Maximum working temperature:90ºC.
Filtration media:125 micron*.
Flow range:15-500 l/min.
Bypass rating:0.17 bar.
Mounting threads:G1/2 up to G3.
* Non-standard elements are available toorder. Consult Parker Filtration.
SE.1
319
0 50 100 500450150 200 250 300 350 400
Flow (l/min)
Δp(b
ar)
0
0.01
0.04
0.03
0.02
0.58
0.44
0.29
0.15
0
Δp(P
SID
)
0 13 39 79 132
Flow (US GPM)
11926 53 66 92 106
SE.1
457
SE.1221
SE.1220
SE.121
9
SE.13
26
SE.1
324
SE.1
323
SE.1
320
Ordering Information - Without Bypass
Ordering Information - With Bypass
Part number Supersedes Air flowl/min
Dimensions (mm) Weightkg
SE75111110SE75221110SE75231210SE75351210SE75351310SE75361410SE75461210SE75471310SE75481410
SE.1319SE.1320SE.1457SE.1323SE.1324SE.1326SE.1219SE.1220SE.1221
15255095130180225350500
PortsBSP
1/2
3/4
111/2
11/2
22
21/2
3
Micronrating
125125125125125125125125125
105.5109.5139.5140200260150212272
466464868686150150150
3646556565757090100
A B C0.080.150.170.280.330.400.640.720.92
Bypassrating
N/AN/AN/AN/AN/AN/AN/AN/AN/A
Part number Supersedes Air flowl/min
Dimensions (mm) Weightkg
SE75111111SE75221111SE75231211SE75351211SE75351311SE75361411SE75461211SE75471311SE75481411
SE.5100SE.5101SE.5102SE.5103SE.5104SE.5105SE.5106SE.5107SE.5108
15255095130180225350500
PortsBSP
1/2
3/4
111/2
11/2
22
21/2
3
Micronrating
125125125125125125125125125
105.5109.5139.5140200260150212272
466464868686150150150
3646556565757090100
A B C0.110.180.210.310.360.430.670.750.95
Bypassrating
0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar0.17 bar
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Reservoir equipment207
Reservoir Equipment
Diffusers
Specification
Ordering Information
Installation Details
Construction:Zintec body.30% glass-filled nylon head.Zintec end cap.Epoxy adhesives.
Flow range:50 l/min up to 454 l/min.
Mounting threads:G3/4 up to G2.
The effect of fitting a diffuser
Note: When installing a diffuser theplain area on the outside must befacing the pump inlet.
The benefits of specifying a Parker Filtration Diffuser
Installing a Parker Filtration Diffuser in a hydraulic reservoir isa simple operation that can make a big difference to systemefficiency.
With its special concentric tubes designed with dischargeholes 180° opposed fluid aeration, foaming and reservoir noiseare reduced and pump life extended by reducing cavitation tothe pump inlet.
Diffusers manufactured to customer specifications and othersizes of diffusers are available.
Mounting thread
120° plain area
CA
/FH
EX
ØB
A
Part number Flowl/min
Dimensions (mm) Weightkg
2201220222102203
11422750454
PortsBSP
111/2
3/4
2
127178120242
86866286
55654675
A B C0.420.560.270.69
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 30
208
Reservoir Equipment
Inline Filters
Metal Inline Filter - Specification
Installation Details Filter Selection
Construction:Head – zinc.Bowl – AluminiumBS1470/1050A. 1987.
Element:Zintec/Stainless steel.125 micron*.
Max. flow:90 l/min.
Max working pressure:7 bar.
Thread:G1.
Working temperature:-30°C to +80°C.
Seal:Nitrile.
Bowl tightening torque:12 Nm.
Flow direction:From outside to inside.
Weight:1.5 Kg.
*Alternative media can bespecified.
Construction:Housing and bowlmoulded in polyester.
Element:Stainless steel mesh.125 micron*.
Max. flow:120 l/min.
Max working pressure:7 bar.
Thread:G1.
*For alternative mediaconsult Parker FiltrationNote: When using withwater, protect from
freezing.
Working temperature:-30°C to +80°C.(+60°C water).
Seal:Nitrile.
Bowl tightening torque:12 Nm.
Bowl tightening note:A box or ring spanner isrecommended.
Flow direction:From outside to inside.
Weight:0.5 Kg.
Flow (l/min)
Δp(b
ar)
0 20 40 60 80 100 120 140 1600
0.1
0.2
0.3
0.4
0.50 5 16 42
Flow (US GPM)
3111 21 26 377.3
5.8
1.5
0
2.9 Δp(P
SID
)
4.4
Total assembly pressure drop flow curveOil Viscosity 30 cSt Relative density 0.856
0 20 40 60 80 100 120 140 1600
0.2
1.0
0.8
0.6
0.4
Flow (l/min)
Δp(b
ar)
14.5
11.6
2.9
0
5.8 Δp(P
SID
)
8.7
0 5 16 42
Flow (US GPM)
3111 21 26 37
Total assembly pressure drop flow curveOil Viscosity 30 cSt Relative density 0.856
Circuit symbol
G1
Ø78.5
10
24
48
216
160
Minimum for bowlremoval
2448 56
99
116
542 off fixingholes Ø7.2
Circuit symbol
30
Ø74
G1
Minimum for bowlremoval
6
Ø90
215
609
Ø45 63
22 A/F HEX
5749
112
Inlet
54.530
102
2 off fixingholes Ø7.5
Ordering Information
Non-Corrodible Inline Filter - Specification
Installation Details
Part number Supersedes ThreadBSP
Weight
IL761151IL761251
IL.1151IL.1251
11
Appliance
OilWater
Micronrating
125125
0.50.5
Replacementelement
R.76115R.76125
Part number Flowl/min
IL1115 90
ThreadBSP
G1
Micronrating
125
Replacementelement
EIL1115
Supersedes
E.IL.1115
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Standard products table
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Ordering Information
Ordering Examples
Reservoir Equipment
Drive Couplings
Installation Details
Technical Data
Materials To select coupling model check application to establishrunning load condition.Check chart for factor (F) and apply factor (F) to *Rating ofcoupling formulae. This answer you now apply to *Rating/100rev/min below.It is advisable always to check shaft sizes being used onapplication and check with dimension ‘H’.
Factor (F)Application Electric motor Petrol/diesel engineUniform load 1.00 1.20Medium shock 1.25 1.50Heavy shock 1.75 2.00
HP of application x 100 x F*Rating of coupling= rev/min of application
F
G
A A
Grub screw position
Hub withdrawalclearance
E
D
ØJ
ØH
ØC
ØB
Sectioned detail
Parker Filtration drive coupling components are orderedseparately. Here are three examples of complete assembliesordered this way.1. Complete assembly – DC28M14B04K
Made up of a DC28M14DC28B04KDC28.S (Sleeve)
Complete model DC28 drive coupling: One gear hub has14mm bore with 5mm wide keyway and other hub has a 1/2”bore with 0.125” wide keyway.Both hubs supplied with locating grub screw.
2. Complete assembly – DCR42PBPBMade up of 2x DCR42PB’s
DC42S (Sleeve)Complete model DC42 drive coupling: Both gear hubs havepilot bore of 10.5mm. Not supplied with grub screws.3. Complete assembly – DCR55PBB12K
Made up of a DCR55PBDC55B12KDC55S (Sleeve)
Complete model DC55 drive coupling: One gear hub pilotbored 5/8”, the other hub pilot bored 11/2”. Latter only suppliedwith grub screw.
Coupling halvesSintered Steel
SleeveNylon 66
Max temp sleeve83°C
Reservoir equipment209
DC28*DC42*DC55*
5000 0.75 1.00 0.4 40.0 66.0 44.5 38.0 4.0 104.0 84.0 28.0 10.0 7.05000 1.32 1.75 0.75 42.0 90.0 60.0 42.0 4.0 115.0 88.0 42.0 14.0 10.54000 6.00 8.00 2.05 59.0 125.0 83.0 65.0 4.0 158.0 122.0 55.0 19.0 16.0 min
38.1 max
Max *Rating/ –H– Jspeed 100 rev/min Weight A B C D E F G max min pilot
Part number prefix rev/min kW hp mm mm mm mm mm mm mm bore bore bore
Height of keyway from base of boreMetric Imperial
Standard bore BS 4500, (1985) BS 1916, Part 1, (1985)Standard keyway BS 4325, Part 1 (1980) BS 46, Part 1, (1985)
Assembly data1. Maximum angular misalignment is ±2°. Maximum radial misalignment is ±0.4mm.2. Ensure that the Parker Filtration drive coupling gear hubs are an easy fit to their respective shafts.
Do not use heavy blows to force the hubs on.3. When in position, the hubs should have a gap of 4mm as denoted by ‘E’ dimension.4. Tighten grub screws to locate both gear hubs on to their respective shafts.
Part number Supersedes Dimensions (mm) Weight
Ø Bore Width Height
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 30
210
Reservoir Equipment
Drive Couplings
Ordering Information
Model DC.28
Note 1: Part numbers featured with bold highlighted codes willensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will requireyou to contact Parker Filtration for availability.
DC28M16DC28M19DC28M20DC28M22DC28M24DC28M25DC28M28DCR28PB
DC28SDC28M10DC28M11DC28M14DC28M18DC28B03KDC28B04KDC28B05KDC28B06KDC28B07KDC28B08KDC28B09K
DC.28.M16DC.28.M19DC.28.M20DC.28.M22DC.28.M24DC.28.M25DC.28.M28DCR.28.PB
DC.28.SDC.28.M10DC.28.M11DC.28.M14DC.28.M18DC.28.B03KDC.28.B04KDC.28.B05KDC.28.B06KDC.28.B07KDC.28.B08KDC.28.B09K
16.0mm19.0mm20.0mm22.0mm24.0mm25.0mm28.0mm
N/AN/A
10.0mm11.0mm14.0mm18.0mm
7/16
1/2
5/8
3/4
7/8
111/8
5.0mm6.0mm6.0mm6.0mm8.0mm8.0mm8.0mm8.0mm
N/A3.0mm4.0mm5.0mm6.0mm
0.125 ins0.125 ins0.188 ins0.188 ins0.250 ins0.250 ins0.313 ins
18.4mm21.9mm22.9mm24.9mm27.5mm28.5mm31.5mm
N/AN/A
11.5mm12.9mm16.4mm20.9mm0.50 ins0.57 ins0.72 ins0.84 ins0.99 ins1.12 ins1.24 ins
Rangefrom 0.259Kgto 0.411Kg
Part number Supersedes Dimensions (mm) Weight
Ø Bore Width Height
Model DC.42
DC42M25DC42M28DC42M30DC42M35DC42M38DC42M42DCR42PB
DC42SDC42M18DC42M19DC42M20DC42M22DC42M24DC42M32DC42B05KDC42B06KDC42B07KDC42B08KDC42B09KDC42B10KDC42B11KDC42B12KDC42B13K
DC.42.M25DC.42.M28DC.42.M30DC.42.M35DC.42.M38DC.42.M42DCR.42.PB
DC.42.SDC.42.M18DC.42.M19DC.42.M20DC.42.M22DC.42.M24DC.42.M32DC.42.B05KDC.42.B06KDC.42.B07KDC.42.B08KDC.42.B09KDC.42.B10KDC.42.B11KDC.42.B12KDC.42.B13K
25.0mm28.0mm30.0mm35.0mm38.0mm42.0mm
N/AN/A
18.0mm19.0mm20.0mm22.0mm24.0mm32.0mm
5/8
3/4
7/8
111/8
11/4
13/8
11/2
15/8
8.0mm8.0mm8.0mm10.0mm10.0mm12.0mm12.0mm
N/A6.0mm6.0mm6.0mm6.0mm8.0mm10.0mm0.188 ins0.188 ins0.250 ins0.250 ins0.313 ins0.313 ins0.375 ins0.375 ins0.439 ins
28.5mm31.5mm33.5mm38.5mm41.5mm45.5mm
N/AN/A
20.9mm21.9mm22.9mm24.9mm27.5mm35.5mm0.72 ins0.84 ins0.99 ins1.12 ins1.24 ins1.37 ins1.49 ins1.61 ins1.76 ins
Rangefrom 0.436Kgto 0.753Kg
Part number Supersedes Dimensions (mm) Weight
Ø Bore Width Height
Model DC.55
DCR55PBDC55S
DC55M25DC55M28DC55M30DC55M32DC55M35DC55M38DC55M42DC55M55DC55B09KDC55B10KDC55B11KDC55B12KDC55B13KDC55B14KDC55B15KDC55B16KDC55B17K
DCR.55.PBDC.55.S
DC.55.M25DC.55.M28DC.55.M30DC.55.M32DC.55.M35DC.55.M38DC.55.M42DC.55.M55DC.55.B09KDC.55.B10KDC.55.B11KDC.55.B12KDC.55.B13KDC.55.B14KDC.55.B15KDC.55.B16KDC.55.B17K
N/AN/A
25.0mm28.0mm30.0mm32.0mm35.0mm38.0mm42.0mm55.0mm
11/8
11/4
13/8
11/2
15/8
13/4
17/8
221/8
16.0mmN/A
8.0mm8.0mm8.0mm10.0mm10.0mm10.0mm12.0mm16.0mm0.313 ins0.313 ins0.375 ins0.375 ins0.439 ins0.439 ins0.501 ins0.501 ins0.626 ins
N/AN/A
28.5mm33.5mm33.5mm35.5mm38.5mm41.5mm45.5mm59.5mm1.24 ins1.37 ins1.49 ins1.61 ins1.76 ins1.89 ins2.01 ins2.13 ins2.31 ins
Rangefrom 1.248 Kg
– 2.046 Kg
Pipe Clamp System
Multiclamp
Reservoir equipment211
Pipe Clamp System
Multiclamp
When only the best ClampingSystem will do ....specify Multiclamp
Multiclamp is a system. A system ofcomponents, each one engineered toa high standard – that together build toprovide effective, all-purpose pipeworkclamping. Multiclamp offers creativeand cost-effective environmentalbenefits to the system designer andinstaller. Creating accurate runs ofvarying diameter tubes, pipes, hosesand cables in all industries.
Secure Multiclamp installationsensure a leak free, noise free andvibration free system.
The neat design of pipe line runs offerseasy maintenance of machinery andplant equipment. Visual planning of lineruns is straightforward with Multiclamp– accurate installations can be achievedwithout skilled labour – keeping costsdown and quality up.
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 31
Planning with Multiclamp
These notes have been compiled to assist in planning yourMulticlamp system.
Multiclamp offers considerable flexibility. For example, it can fitin with a factory installation that is being built in phases.
Should a last minute change in pipe diameter occur duringinstallation, an alternative rubber bush is likely to be all that isrequired. Not a complete and expensive re-think of the installation.
Multiclamp metal components can be sprayed to match avehicle livery or plant installation and, if installed properly,should require no maintenance.
Installation is simple and requires no experience
Anyone can use Multiclamp and only the basic, everyday toolsare required.
From one pipe to almost any number – because each Multiclamp‘position’ can be visually sighted and its position adjusted – analmost guaranteed straight run can be obtained. Equally, changesof plane or direction can be achieved simply and securely.
Group pipe sizes together to obtain the most economical useof three basic Multiclamp Series.
Some sites will require all pipes mounted in one single plane– either vertical or horizontal.
When stacked modules are preferred, the only work to bedone on the Multiclamp is to saw off the desired length.
If a large number of pipe lines are to be run, it is recommendedthat the upper clamping unit is simply cut into two lines only,and progressively assembled by securing two pipes at a time.It will be recognised that most odd lengths on site will be used,and one man can easily cope with a large number of pipe linesby this simple progressive build up. This assembly will provideeasy access for servicing and replacing pipes. This methodalso reduces the quantity of Stacking Nuts and Studs by 50%.
If a factory installation is being built in phases, it would bewise to leave the first phase with a lower clamping unit andStacking Nuts in position ready to receive pipe runs for thenext building phase.
Your maximum pipe size will determine the series to use. There is adegree of versatility provided by the rubber bushes. You choose fromsingle or multistacked Multiclamp, whichever suits your particularinstallation requirements.
Series 106.0mm-20.0mm(1/4”-3/4”)
Series 166.0mm-28.0mm(1/4”-1”)
Series 3210.0mm-50.0mm(3/8”-2”)
Stacked modules or single module
Fixing points to suit
Stacking stud andnut not requiredin this position
212
Material Specifications
Zinc plated steel with anti-corrosive, full passivate. Multiclampcan also be multi-stacked using stacking studs and nuts.Series 10 and 16 clamp is supplied in lengths of 603mm andSeries 32 in lengths of 1206mm. These can be simply cut tothe required lengths for installation.
Series 10 will accept pipe or hose diameters from 6mm upto 20mm maximum. Series 16 from 6mm up to 28mm andSeries 32 from 10mm up to 50mm. Across the 3 Series, thereare 26 different high-quality split rubber bushes to select fromto cope with any combination and number of different pipeand hose diameters in the same run.
Specification
Dimension details supplied in product configurator
Multiclamp – 12 or 16 holes Split Bushes
B C CTS ( B )
Ø
A
E
FR
EF
B C C B
D
A
E
F
Series 10PAT.1170557
Series 10PAT.1170557
ThetfordEngland
C
G
HR
EF
A BØ
D E
F
Ø
B
A
Pipe size
1 set of clamping units = 1 pair Split bushes are ordered in sets onlyi.e. 1 set of bushes = 10 bushes of one size
Double ClampSingle Clamp
Reservoir equipment213
Mounting adaptors are not orderedin sets. i.e. 1 off mounting adaptors= 1 single piece.
Weld plates are ordered in sets only.i.e. 1 set of weld plates= 10 weld plates.
B
AØ B
A
C
D
EF
Thre
ad
A
BA
B
Thre
ad
Stacking studs are ordered in setsonly. i.e. 1 set of stacking studs= 50 stacking studs of one size.
Stacking nuts are ordered in sets only.i.e. 1 set of stacking nuts= 50 stacking nuts of one size.
Note: For stainless steel version please consult Parker.
Stacking Nuts Stacking Studs Mounting Adaptors Weld Plate
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 31
214
Pipe Clamp System
MulticlampOrdering Information - Series 10
Series 16Ordering Information -
Part number Supersedes Description Dimensions (mm) Thread
MC101MC102MC1016MCN10MCS10
MCWP10MCSB10
MCB10MO
MC.10.1MC.10.2MC.10.16MC.N.10MC.S.10
MC.WP.10MC.SB.10
MC.B.10.MO
Single clampDouble clamp16 bay clampStacking nutStacking stud
Weld plateStandard bolt
Mounting adaptor
Packquantity
10 pairs10 pairs1 pair
505010501
25.025.034.011.032.013.3
27.0
8.58.538.133.021.025.0
25.0
38.138.125.0
2.610.0
A B C55.093.015.0
6.3
D19.019.038.1
25.0
E38.038.0601.5
8.5
F
19.0
G
38.0
H9.09.09.0
8.7
Ø
M8 x 1.25M8 x 1.25
M8 x 1.25
Packweight
0.60 Kg1.00 Kg0.80 Kg0.80 Kg0.50 Kg0.35 Kg0.55 Kg0.02 Kg
Product configurator
Part number Supersedes Description Dimensions (mm) Pipe size
MCG105MCG106MCG108MCG1010MCG1012MCG104
MC.G.10.5MC.G.10.6MC.G.10.8MC.G.10.10MC.G.10.12MC.G.10.4
Split bushSplit bushSplit bushSplit bushSplit bushSplit bush
Packquantity
101010101010
25.525.525.525.525.525.5
A27.027.027.027.027.027.0
B810
12-1415-1618-20
6
(mm)5/163/81/25/83/41/4
OD
Packweight
0.13 Kg0.12 Kg0.12 Kg0.10 Kg0.90 Kg0.13 Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Part number Supersedes Description Dimensions (mm) Thread
MC161MC162MC1612MCN16MCS10
MCWP10MCSB10
MCB16MO
MC.16.1MC.16.2MC.16.12MC.N.16MC.S.10
MC.WP.10MC.SB.10
MC.B.16.MO
Single clampDouble clamp12 bay clampStacking nutStacking stud
Weld plateStandard bolt
Mounting adaptor
Packquantity
10 pairs10 pairs1 pair
505010501
25.025.047.011.032.013.3
27.0
7.07.050.844.021.025.0
36.0
50.850.825.0
2.610.0
A B C65.0116.021.0
6.3
D23.823.850.8
25.0
E47.647.6608.8
8.5
F
25.0
G
51.0
H9.09.09.0
8.7
Ø
M8 x 1.25M8 x 1.25
M8 x 1.25
Packweight
0.80 Kg1.60 Kg1.00 Kg1.06 Kg0.50 Kg0.35 Kg0.55 Kg0.06 Kg
Product configurator
Part number Supersedes Description Dimensions (mm) Pipe size
MCG165MCG166MCG168MCG1610MCG1612MCG1614MCG1616MCG1618MCG164
MC.G.16.5MC.G.16.6MC.G.16.8MC.G.16.10MC.G.16.12MC.G.16.14MC.G.16.16MC.G.16.18MC.G.16.4
Split bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bush
Packquantity
101010101010101010
35.435.435.435.435.435.435.435.435.4
A27.027.027.027.027.027.027.027.027.0
B810
12-1415-1618-2022.025.028.0
6
(mm)5/163/81/25/83/47/81
1/4
OD
Packweight
0.28 Kg0.28 Kg0.26 Kg0.22 Kg0.20 Kg0.18 Kg0.14 Kg0.16 Kg0.28 Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Reservoir equipment215
Series 32Ordering Information -
How to ‘build’ Multiclamp
Part number Supersedes Description Dimensions (mm) Thread
MC321MC322MC3216MCN32MCS32
MCWP32MCSB32
MCB32MO
MC.32.1MC.32.2MC.32.16MC.N.32MC.S.32
MC.WP.32MC.SB.32
MC.B.32.MO
Single clampDouble clamp16 bay clampStacking nutStacking stud
Weld plateStandard bolt
Mounting adaptor
Packquantity
10 pairs10 pairs1 pair
505010501
40.041.072.013.038.017.5
40.0
9.49.476.271.522.032.0
58.0
76.276.240.0
4.012.0
A B C95.0171.034.0
8.0
D38.038.076.2
32.0
E76.276.2
1211.0
11.0
F
38.5
G
77.0
H11.111.111.0
10.7
Ø
M10 x 1.5M10 x 1.5
M10 x 1.5
Packweight
2.25 Kg3.82 Kg3.80 Kg1.99 Kg0.90 Kg0.70 Kg1.30 Kg0.26 Kg
Product configurator
Part number Supersedes Description Dimensions (mm) Pipe size
MCG3210MCG3212MCG3216MCG3218MCG3220MCG3224MCG3232MCG326MCG328MCG3214MCG3226
MC.G.32.10MC.G.32.12MC.G.32.16MC.G.32.18MC.G.32.20MC.G.32.24MC.G.32.32MC.G.32.6MC.G.32.8MC.G.32.14MC.G.32.26
Split bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bushSplit bush
Packquantity
1010101010101010101010
59.059.059.059.059.059.059.059.059.059.059.0
A44.544.544.544.544.544.544.544.544.544.544.5
B15-1618-20
2528-3032-3435-38
5010
12-142242
(mm)5/83/41
1 1/41 1/4
23/81/27/8
OD
Packweight
1.10 Kg1.10 Kg1.00 Kg1.00 Kg0.80 Kg0.80 Kg0.40 Kg1.30 Kg1.20 Kg1.00 Kg0.60 Kg
Note 1: Part numbers featured with bold highlighted codes will ensure a ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
1 2 3
4 5 6
7 8 9
Reservoir Equipment
Inline Check Valves
Specification
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 32
216
Installation Details
Technical Data Ordering Information
Construction:Steel UNI 5105.
Ball and spring:Chrome finished steel.
Retainer:Nylon.
Flow rates:From 20 l/min to 150 l/min.
Max. working pressure:350 bar.
Valve crack pressures:0.35 and 4.5 bar.
Circuit symbol
A B A/F HEX
Thread
2301230223032304230523112312231323142315
203050100150203050100150
0.350.350.350.350.354.504.504.504.504.50
1/4
3/8
1/2
3/4
11/4
3/8
1/2
3/4
1
5466778810854657788108
19243036461924303646
0.090.170.320.480.990.090.170.320.480.99
CrackingFlow pressure Thread A B Weight
Part number l/min bar G mm mm Kg
2301
2302
2303
2304
2305
0 20 40 22020060 80 100 120 140 160 180
Flow (l/min)
Δp(b
ar)
0
0.5
1.0
4.0
3.5
3.0
2.5
2.0
1.5
58
43.5
29
14.5
0
Δp(P
SID
)
0 5 21 37 58
Flow (US GPM)
5311 16 26 31 42 47
Pressure Drop Flow Curves Standard products table
Reservoir equipment217
Reservoir Equipment
Single Station Gauge Isolator Valves
Specification
Single Station Installation Details
Operation Details
Construction:Single Station: Cast iron and steel. Knurledaluminium knob with ‘Twist to lock’ or ‘pushto read’ type.
Max. working pressure:350 bar.
Port size:Single Station: G1/4.
Weight:Single Station: 0.90 Kg.
GI1486GI1414
Part number
Single station gauge isolator “twist to lock” typeSingle station gauge isolator “push to read” type
Description
0.90 Kg0.90 Kg
Weight
80.0
20.0 SQ
13.0
57.0
91.0
90.0
G1/4 TYP3 positions
Circuit symbol
27.0
28.0
54.0
26.0
29.0
27.7
21.0
36.0
HEX nut 38.0 A/F
G
PDR
Single Station
Ordering InformationStandard products table
Symbol
25
23
15
2
Ø9.
5Ø5
Snubber fittedG1/4 (1/4” BSP)
14 A/F HEX
Reservoir Equipment
63mm Dia. Pressure Gauges
Specification
Parker HannifinHydraulic Filter Division EuropeFDHB200UK. Section 32
218
Installation Details
Construction:Case: Natural finish stainless
steel.Window: Non-splintering clear
acrylic glass.Movement: Cu alloy.Dial: White plastic, with
pointer stop pin.Pointer: Black plastic.
Liquid filling:Glycerine 99.7%.
Working pressure:Max 75% of the full scale value.
Process temperature:+ 60°C maximum.
Accuracy:1.6% FSD.
Wetted parts connector:Copper alloy.
Bourdon tube:< 60 bar = Cu alloy, C-type,soft soldered.> 60 bar = Cu alloy, helical type,soft soldered.
Note: It is recommended that allglycerine gauges should be mountedin the vertical position with gaugecase relief valve uppermost. Pressurerange up to 1000 bar available.
Bottom Connection
Panel Mounting
Panel Mounted (3-hole flange)
Note 1: Part numbers featured with bold highlighted codes will ensurea ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you tocontact Parker Filtration for availability.*Note 3: Any subsequent changes to gauge accuracy will be notified.
13 32 68 62 6.5 G1/4 54 14 0.21
a b D1 D2 e G h SW Weight±0.5 ±1 Kg
Dimensions (mm) Bottom Connection
32 56 68 62 6.5 G1/4 14 0.21
b b2 D1 D2 e G SW Weight±0.5 ±1 Kg
Dimensions (mm) Panel Mounting (Lower Back)
Note 1: Panel cut-out 64.5 ±0.5Note 2: 13mm on the outside radius required to allow for fixing clamp.
Panel Mounted (3-hole flange)
75 85 3.6
D1 D2 D3
Dimensions (mm)
Note 1: Gauge dimensions as forpanel mounting option abovewith flange as shown below.
Note 2: Panel cut-out for 3-holemounting 67±0.3.
ØD2
ØD1
120°
120°
ØD3
Ordering InformationMounting Stem Detail
Part numberPGB0631010PGB0631016PGB0631025PGB0631040PGB0631060PGB0631100PGB0631160PGB0631250PGB0631400PGB0631600PGB0631004
SupersedesPGB.0631.010PGB.0631.016PGB.0631.025PGB.0631.040PGB.0631.060PGB.0631.100PGB.0631.160PGB.0631.250PGB.0631.400PGB.0631.600
PGB.0631.004
Pressure range0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-600 bar0-4 bar
Connector typeG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 BottomG1/4 Bottom
Part numberPGC0631010PGC0631016PGC0631025PGC0631040PGC0631060PGC0631100PGC0631160PGC0631250PGC0631400PGC0631004PGC0631600
SupersedesPGC.0631.010PGC.0631.016PGC.0631.025PGC.0631.040PGC.0631.060PGC.0631.100PGC.0631.160PGC.0631.250PGC.0631.400
PGC.0631.004PGC.0631.600
Pressure range0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-4 bar
0-600 bar
Connector typeG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 PanelG1/4 Panel
Part numberPGF0631060PGF0631100PGF0631160PGF0631250PGF0631400PGF0631004PGF0631010PGF0631016PGF0631025PGF0631040PGF0631600
SupersedesPGF.0631.060PGF.0631.100PGF.0631.160PGF.0631.250PGF.0631.400
PGF.0631.004PGF.0631.010PGF.0631.016PGF.0631.025PGF.0631.040PGF.0631.600
Pressure range0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-4 bar0-10 bar0-16 bar0-25 bar0-40 bar0-600 bar
Connector typeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel FlangeG1/4 Panel Flange
Panel Mounting (Lower Back)Bottom ConnectionD1
SW
G
h
ØD
2
b
a
e
SW
e
ØD
2
bb2
G
D1
45°
109±1
Reservoir equipment219
Reservoir Equipment
100mm Dia. Pressure Gauges
Specification
Note 1: Part numbers featured with bold highlighted codes will ensurea ‘standard’ product selection.Note 2: Alternate displayed part number selection will require you tocontact Parker Filtration for availability.*Note 3: Any subsequent changes to gauge accuracy will be notified.
Symbol
43
39
25
5
Ø17
.5
Ø6
Snubber fittedG1/2 (1/2” BSP)
22 A/F HEX
Installation Details
Construction:Case: BS 304 S15 stainless
steel.Window: Acrylic.Movement: Brass.Dial: White aluminium.Pointer: Black aluminium.
Liquid filling:Glycerine 98%.
Working pressure:Full scale value.
Process temperature:+ 60°C maximum.
Accuracy:1.0% FSD.
Wetted parts connector:Copper alloy.
Bourdon tube:< 100 bar = Cu alloy, c-type,soft soldered.> 100 bar = stainless steel 1.4571,helical type, brazed.
Note: It is recommended that allglycerine gauges should be mountedin the vertical position with gaugecase relief valve uppermost.
15.5 48 107 100 8 G1/2 87 22 0.80
a b D1 D2 e G h SW Weight±0.5 ±1 Kg
Dimensions (mm) Bottom Connection
48 81.5 107 100 8 G1/2 22 0.80
b b2 D1 D2 e G SW Weight±0.5 ±1 Kg
Dimensions (mm) Panel Mounting (Lower Back)
Note 1: Panel cut-out 102 ±1.0Note 2: 13mm on the outside radius required to allow for fixing clamp.
Panel Mounted (3-hole flange)
116 132 4.8
D1 D2 D3
Dimensions (mm)
Note 1: Gauge dimensions as forpanel mounting option abovewith flange as shown below.
Note 2: Panel cut-out for 3-holemounting 104±0.5.
ØD2
ØD1
120°
120°
ØD3
Ordering InformationMounting Stem Detail
Bottom Connection
Panel Mounting
Panel Mounted (3-hole flange)
Part numberPGB1001250PGB1001400PGB1001010PGB1001016PGB1001025PGB1001040PGB1001060PGB1001100PGB1001160PGB1001600PGB10011000
SupersedesPGB.1001.250PGB.1001.400PGB.1001.010PGB.1001.016PGB.1001.025PGB.1001.040PGB.1001.060PGB.1001.100PGB.1001.160PGB.1001.600PGB.1001.1000
Pressure range0-250 bar0-400 bar0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-600 bar0-1000 bar
Connector typeG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 BottomG1/2 Bottom
Part numberPGE1001010PGE1001016PGE1001025PGE1001040PGE1001060PGE1001100PGE1001160PGE1001250PGE1001400PGE1001600PGE10011000
SupersedesPGE.1001.010PGE.1001.016PGE.1001.025PGE.1001.040PGE.1001.060PGE.1001.100PGE.1001.160PGE.1001.250PGE.1001.400PGE.1001.600PGE.1001.1000
Pressure range0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-250 bar0-400 bar0-600 bar0-1000 bar
Connector typeG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 PanelG1/2 Panel
Part numberPG.1001250PGF1001400PGF1001010PGF1001016PGF1001025PGF1001040PGF1001060PGF1001100PGF1001160PGF1001600PGF10011000
SupersedesPGF.1001.250PGF.1001.400PGF.1001.010PGF.1001.016PGF.1001.025PGF.1001.040PGF.1001.060PGF.1001.100PGF.1001.160PGF.1001.600PGF.1001.1000
Pressure range0-250 bar0-400 bar0-10 bar0-16 bar0-25 bar0-40 bar0-60 bar0-100 bar0-160 bar0-600 bar0-1000 bar
Connector typeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel FlangeG1/2 Panel Flange
Panel Mounting (Lower Back)Bottom ConnectionD1
SW
G
h
ØD
2
b
a
e
SW
e
ØD
2
bb2
G
D1
45°
109±1
Parker HannifinHydraulic Filter Division EuropeFDHB200UK.
220
Notes