irm

3
IRM® IRM is a Reinforced Zinc Oxide Eugenol, indicated as a temporary restorative material or base/liner material. Among the many applications are: Restoration of deciduous teeth (when permanent teeth are two years or less from eruption) Restorative emergencies Caries management programme IRM is available as bottles of powder & liquid as well as capsules. IRM has a mixing time of 1 minute, a working time of 4 minutes and a setting time of 8 minutes, with a self-cure mode of setting. The physical properties are as follows: Compressive strength of 10,300 psi Solubility of 0.04% Film thickness of 60 Microns Radiopaque Kalzinol Kalzinol is a Zinc Oxide Eugenol lining material. Ideal for several uses including: * Cavity liner * Soothing temporary filling * Temporary cement for crowns and inlays Mixing Time : 1 to 1.5 mins Working Time : 2 mins Setting Time : 3.5 to 4.5 mins Mixing Ratio : Powder liquid ratio 5 : 1 (by weight)

Upload: victoria-chan

Post on 27-Nov-2014

214 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: IRM

IRM®

IRM is a Reinforced Zinc Oxide Eugenol, indicated as a temporary restorative material or base/liner material. 

Among the many applications are:

Restoration of deciduous teeth (when permanent teeth are

two years or less from eruption)

Restorative emergencies

Caries management programme

IRM is available as bottles of powder & liquid as well as capsules. IRM has a mixing time of 1 minute, a

working time of 4 minutes and a setting time of 8 minutes, with a self-cure mode of setting.  The physical

properties are as follows:

Compressive strength of 10,300 psi

Solubility of 0.04%

Film thickness of 60 Microns

Radiopaque

Kalzinol

Kalzinol is a Zinc Oxide Eugenol lining material. 

Ideal for several uses including:

* Cavity liner

* Soothing temporary filling

* Temporary cement for crowns and inlays

Mixing Time : 1 to 1.5 mins

Working Time : 2 mins

Setting Time : 3.5 to 4.5 mins

Mixing Ratio : Powder liquid ratio 5 : 1 (by weight)

Dycal®

Page 2: IRM

Dycal® is the UK's number 1 Calcium Hydroxide Cavity Lining Material and no other calcium hydroxide

can match the track record of Dycal®. For more than 25 years it has been used with confidence by

dentists world-wide for cavity lining and pulp capping.

Dycal® possesses a quick, convenient and easy paste to paste mixing system. This system prevents

small variations in the base to catalyst ratio, affecting the working and setting times of the material. The

material sets hard quickly and withstanding amalgam condensation, allowing for the immediate

placement of restorative material or an intermediary base.

Dycal has high compressive strength, low solubility and a hard setting, resisting the forces of amalgam

condensation. It does not inhibit the setting of acrylic and composite restorations and has no negative

effect on the aesthetic result of translucent composite materials.

Not only do properties inherent to Dycal® help stimulate the formation of secondary dentine, allowing

the sealing of the pulp chamber, they offer aid to the restoration of the pulp vitality. Its radiopaque nature

allows effective future differentiation between the liner, dentine and caries.

Couple all the above benefits with the dentine colour of Dycal® and the result is an enhanced final

restoration.

Properties:

Type of Cement : Calcium Hydroxide

Mixing Ratio : Base : Catalyst 1.17g : 1.0g

Indications : Vital pulp capping, pulp protection under liners, restorative materials

Mixing Time : 10 sec

Working Time : 2 mins 20 sec

Setting Time : 2.5 to 3.5 mins 

Page 3: IRM

Pack Details

Dycal® Refill pack - Base paste 13g, Catalyst paste 11g, Mixing pad