isgf technology session (last mile connectivity in smart grid) “regulatory perspectives on...
TRANSCRIPT
ISGF TECHNOLOGY SESSION(Last Mile connectivity in Smart Grid)
“Regulatory Perspectives on Distribution Automation”
Vijay L Sonavane ME(Elect.)
Member(Tech) MERC Mumbai 400 005
Date: 1st June 2012
Maharashtra Power System• Area :3.08 L Sq. km, 40,615 Villages
& 457 Towns, 121 M Citizens• Installed capacity: 24000 (+) MW • Daily Demand met: 325-375 MU• 4 DL, 3 GENCO, 4TRANSCO, 3 JV TRANSCO• 22 M Customers (3.4M Ag Pumps)• ARR: Rs 60,000 Crores • Demand Growth: 8%• Dist Losses: MSEDCL: 16.8% &
Mumbai Utilities: 7-9.5 % • Load shedding free by Dec 2012
Existing Grid Operation in Maharashtra
• Centralized Generation disseminated via a relatively passive limited control
• Limited two- way communication between utilities & end users
• Many Slow Analog & Electro Mechanical legacy systems (prone to failures leading to black outs)
Thomas Edison & Present Grid System
“He has been dead for more than 75 years, but Thomas Edison-
hailed as father of Electric blub- probably could have run the
Nation’s modern day Electric Grid- It has not changed much”
- Denver Business Journal (Mar. 2007)
EA 2003: Mandate for Reforms
• An Act for taking measures conducive to (1) Development of electricity industry,(2) Promoting competition therein,(3) Protecting interests of consumers (4) Promotion of efficient & environmental
friendly policies
• S 61 (c): “ Commission…. shall be guided by the factors which would encourage competition, efficiency, economical use of resources, good performance & optimum investments”
Regulator’s Concern
• Key Regulatory concepts:– “Prudent” management decisions– “Used & Useful” Technology– “Least cost/Least risk”
• Investment approval only if it enhances service quality & Reliability/Efficiency
• Cost Recovery more likely if:– Technology is proven & benefits are certain
Example for impact on Tariff Capitaliation 400 Rs Cr
Debt (Loan)
Equity (Own Funds)
%age 70% % age 30%Rs Cr 280 Rs Cr 120
Annual Fixed Costs Computation
Interest on Loan (@ 10%) 28 Rs CrReturn on Equity (@16%) 19 Rs CrO&M Exp(Salaries/R&M/A&G) 10 Rs CrInterest on Working Capital 10 Rs CrDepreciation(@ 5%) 20 Rs Cr
Total burden on 1st year tariff 87 Rs Cr
(Consider a utility with ABR=Rs 4 PU & 10000 MU sale Rs 87 Cr additional ARR means PU tariff rise 8.7 Ps)
Difference in Objectives of Regulators & Innovators
• Regulators set tariffs based on known cost & proven technology : to protect consumers from tariff shock
• Regulators are Risk-averse: (strong disliking) “It’s the second mouse that gets the cheese”, first having proved its use.
• Innovators seek capital to bring new technology to market & reap benefits of being an “early mover”.
• Innovator: Risk-taker: “It’s the early bird that gets the worm”
Key issues in front of Regulators(Agent of “CHANGE”?)
• What is Distribution Automation? • Is Dist Automation helpful for system?• Is technology sufficiently mature?• Whether DA Investments are prudent?• Who should bear “dry hole” risk?
Main players of Dist Automation Market:Utilities/ Electricity Consumers/R&D Institutions/Equipment Vendors & System integrators/ &
REGULATORS
Distribution Automation (IEEE Definition)
• “A system that enables an electric utility to monitor, coordinate & operate Dist components in a real-time mode from remote locations.’’
• WHY AUTOMATION?: – Improvement of Efficiency/ Reliability/ Quality of supply
• HOW? By Using advanced communication & IT systems • Decision making feature of DA distinguishes it from the normal
SCADA system.
• BENEFITS OF AUTOMATION: – Released capacity/ Reduced Dist losses– Increased Service Reliability (Regulatory requirement).– Life Extension of equipments / Effective utilization of Assets
Dist Automation Functions• MONITORING FUNCTIONS: Meter reading/ System &
equipment status/ Unusual events• CONTROL FUNCTIONS: Switching operations/ Feeder
sectionalizers/ Change of settings/ Capacitor bank control /Voltage Regulators/ Protective equipment
• PROTECTION FUNCTIONS : Over current protection/ Distance protection/ Differential protection
• Dist Automation Sub-system CATEGORIZATION: Information management/ Reliability management/ Efficiency management/ Voltage & VAR management/Load management/ Power quality management
Need for DA in Indian Utilities. • T&D losses: 24%. DT failure Rate: 10-15%
per year • DT failure: Due to non-availability of DT
health parameters & its loading conditions.• O&M of Dist system: Non-availability of
system topological information, current health information of Dist components
• Lack of use of efficient tools for planning & quick detection of fault & service restoration
• GOI’s positive step: Restructured Accelerated Power Development & Reforms Program (R-APDRP): Objective to introduce DA with IT solutions for better Management & Control of Dist system .
Attributes of Dist Automation • Acquire , distribute, Manage, correlate & share large amounts
of real-time data & non-operational data• Enhance network security of real-time & non-operational data• Perform functions of several individual devices by one device
(reduce Capex)• Utilize modern S/S communication solutions (reduce costs)• Support reuse of legacy equipment by communicating with
existing devices & adding new functions on integrated devices (reduce Costs)
• Monitoring of S/S equipment & feeders• Implement expandable scalable architecture to meet future
physical & functional requirements (reduce life cycle costs )
Feeder Automation • Dist S/s Automation Feeder
Automation • By acquiring data & automating
responses on feeder: Reliability to end customer significantly improves
• Functions: – Voltage & load measurement, – feeder protection, – auto-sectionalizing, auto-restoration,– VOLTAGE/VAR control, – power quality monitoring & auto-
restoration (in communications with other equipment) & load shedding.
Dist Transformer & other equipment Monitoring
• Monitor DT load, Oil & winding Temp• Check Health of DT using DG Analysis• Controlled loading on Xmers under
emergencies Reclosers & breakers: • Change settings remotely • Record energy interrupted by contacts/ • Refurbish contact only when necessary• Labour & parts savings/ Capacitor
switching for voltage & VAR control• On Load-tap-changer & Voltage regulator
control
Regulator’s views: How DA Can Help Dist. System in Maharashtra?
1. Effective Load Management: As Real Time info is available, LM can be effective. DR Scheme can also be implemented.
2. Solar & RE Issues: Wind/Solar power is infirm (can not be predicted). What happens when 20 % homes in a neighbourhood go solar & a cloud passes overhead?: Grids have trouble accommodating that two-way, intermittent flow. With too much solar/RE power: Local grid voltage could rise, Control can be effective through DA
3. Electricity Pilferage by meter tamper & Unauthorized tapping: DA gives real time alert in case of Pilferages.
Regulator’s views on DA: Risks
• High capital costs: Communication network & large hardware costs: Investment approval needed
• Software integration risk: Establishing Common Standard Interoperability: Comm. Protocol
• Sharing of Benefits to customers & Utility due to: Loss reduction & efficiency improvements
• Large scale integrated pilots needed in Metro cities. • Only after sharing pilot learning, there can be reduction of risk
premium on capital & operating cost levels. • Integration of Distributed Gen, RE Gen & Captive Gen • IT enablness in Rural area: Communication issues
Case Studies: DA Initiatives in Maharashtra
(Data Centre & Customer Facilitation Centre in MSEDCL)
Current Meter Reading Methods in MSEDCL
CMRI for HT & High value LT Customers Dom : Low Revenue: Photo Meter
ReadingTechnology proposed – AMR Common Frame Work developed Protocols used: IEC 62056/21 AMR Coverage : Feeder Meters, HT
Consumers & DTC Meters& LT Commercial consumers (over 100,000 Customers)
Total Customers: 20 Million (+)
GIS Field Survey/Modem installations
20
New Technology initiated in Energy Metering
• Meters with Infrared Ports: Rural Consumers• Meters with Low Power Radio Frequency Modems: Urban
Consumers– Frequency : Free 2.4 GHz Global Band at 250kbps– Protocol used for RF Modems IEEE 802.15.4 Standard
ZigBee• Pre-paid Meters with RF Modules: Online Recharge• Common Meter Protocol for Hand Held Units developed• Advantage: Single hand held Machine for Different Types
of Meters (1/3 PH) & Different Make of Meters
21
R-Infra D Case Study Network Focus : State-of-Art Systems
• State-of-the-Art Dist SCADA
(certified ISO 27001)• Dist Management System• Integrated GIS • Remote Substation monitoring• Fault Passage Indicator & Relay
intelligence – Faster Detection of faulty Section– Enhancing Equipment Life– Reduced voltage fluctuations
Leading to a
System Reliability of 99.98%
TRANSFORMER SWITCHGEARAPFC
FPICAMERAFIRE-ALARM
A TYPICAL SUB-STATION
INTELLIGENTBLACK BOX
OIL TEMP. / LEVEL
AMR / APFC CONTROL
FPI & SWITCHGEAR MGMT.
OVERLOAD / PHASE IMBAL
FIRE / INTRUDER ALARM
DETECT MOTION / CAMERA
CONTROL-ROOM
Equipment Monitoring System (EMS) (R-IN D)
Future – Smart Substation monitoring- Predictive Approach
Technology for Meter reading (R-Infra D)
NEW METER INSTALLATION
METER READING
Tamper Evident electronic meter
MRI enabledBuilt-in
validations
Time < 7 days
Mapping on GIS
Easy and Quick
Reduced errors
Grid Meters / Feeder meters/ DT Meters/ HT Consumers: AMR enabled:
AMR: Load forecasting, EA , LM, Equipment health monitoring/ Value added customer services/ Theft detection module
Near 100% Electronic Meters for LT Consumers
Over 100,000 meters read daily with (accuracy 99.7%)
Meter Reading date remindersOver SMS/On Energy Bill
TPC-D Dist Automation System • DA in all 17 DIST SS & 238/ 507 Consumer SS (FY
2005) • Remote control of all connected DSS & CSS• Monitoring of equipment status & analog values• Alarms & event logs with time stamping • Dynamic network coloring for indicating live & dead
network • Server level redundancy / work Station at PSCC &
zonal control centers. (ML, SAKI, BRVLY, VKRLY, SLSTE, DHRVY)
• Success rate of remote operations thro’ DAS: 98%• Loss of Communication link/ CDMA & Modem
related issues• Replacement being planed in FY 2013 to cater
growing requirements & advanced features (LF/SE/Optimization)
DA in BEST Undertaking • DT Metering : 87 % of completed.• ALSTOM make SCADA at RSS level: WIP • At 11 RSS, local level SCADA system is
ON. Balance 23: WIP• Total DSS: 400 Nos. (RTU: Measurands/
Indications) • 115 DSS SCADA equipments
Commissioned • DA Project: Orders on M/S R.F ARRAYS
M/S EASUN RAYROLE • Control Centre at Backbay Veej Bhavan
& Pathakwadi• Communication link is ZIG-BEE wireless
2.44 GHZ with router/repeaters.
Distribution System Reliability• System Reliability & Customer Satisfaction depends on:
• No. of momentary & sustained interruptions• Duration of interruptions• No. of Customers interrupted
• Reliable system: Regulatory requirements• Need: Maintenance scheduling & Resource allocation• Planning systems for future based on Reliability indices.
– SAIFI (System Average Interruption Frequency Index)– SAIDI (System Average Interruption Duration Index)– CAIDI (Customer Average Interruption Duration Index) – MAIFI (Momentary Average Interruption Frequency
Index)
DA & System ReliabilityDA can increase the System Reliability by • Increasing Utilization of Existing Infrastructure:
enable more efficient operation of PS, allowing closer control of voltage profiles
• Contributing to outage prevention & recovery, optimal system performance under changing conditions, & reduced operating costs.
• Easy Operations & Improved efficiency, management of peak loads via predictive technologies (DR) & communications with equipments: Quick Restoration technologies
What is Smart Grid To a….?• Meter Engineer: Advanced
Metering Infrastructure (AMI) • Protection & Control Engineer:
Substation & Dist Automation• Control Room Operator:
Dist & Outage Management• Design & Planning Engineer:
Asset Management• IT Engineer: Challenge of
bringing it all together• And they all are right!!!!!!!!
MERC Smart Grid Coordination Committee (MERC SG-CC)
• MERC issued DSM Regulations in 2010 & also formulated DSM-CC for speeding up the DSM projects.
• DSM-CC: Secretary MERC is the Chairman of the Committee, with members from utilities & IIT Mumbai, Experts in field
• All DSM proposals received from utilities are discussed in detail in DSM-CC & comments on the scheme are sent to the Commission. No DSM scheme is approved unless it is cleared by DSM CC
• On similar grounds, MERC SG-CC is being formed; with representatives from Utilities (GTD), IIT Mumbai, MERC. First meeting on 12th June 2012. Special Regulations for SG implementation
Let Us Make a SMART beginning towards Smart Grid
• Operational Improvements:– Metering & Billing/Outage management – Work force management /Reduced losses/ Better Asset
Utilization• Asset Management : System Planning (Deferment of CAPEX
Program) /Improved Maintenance practices • DA empowers system operators & provides them
unprecedented visibility & control over the system (Efficiency Improvement
• DA helps in Promoting RE Gen & Captive Gen/ Reducing AT&C losses & Improving System reliability & quality of supply
• Win-Win Situation: Regulator: to work as catalyst for benefit to customers
“If it is to be It is up to me!!”
32
Thank You !!(Contact me: [email protected])
Utilities/ Consumers/R&D Institutions/Equipment Vendors & System integrators/
& REGULATORS