iso update - international organization for standardization · pdf file ·...

ISO Update Supplement to ISOfocus

October 2016

ISO Update, Supplement to ISO Focus -- October 2016 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 September to 30 September 2016

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 8 Ships and marine technology

ISO/CD 19847 Ships and marine technology — Shipboard data servers to share field data on the sea

ISO/CD 19848 Ships and marine technology — Standard data for shipboard machinery and equipment

TC 20 Aircraft and space vehicles

ISO/CD 19971 Space systems — Spacecraft and launch vehi-cle Combined Operation Plan (COP) at launch site — General format

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 8759-1 Agricultural wheeled tractors — Front-mounted equipment — Part 1: Power take-off: Safety requirements and clearance zone around PTO

ISO/CD 8759-3 Agricultural wheeled tractors — Front-mounted equipment — Part 3: Power take-off: General specifications and location

ISO/CD 8759-4 Agricultural wheeled tractors — Front-mounted equipment — Part 4: Three-point linkage

ISO 4254-11:2010/CD Amd 1

Agricultural machinery — Safety — Part 11: Pick-up balers — Amendment 1

ISO/CD 4254-17

Agricultural machinery — Safety — Part 17: Harvesting equipment for potatos, sugar beets and fodder beets

TC 24 Particle characterization including sieving

ISO/DTS 14411-1

Preparation of particulate reference materi-als — Part 1: Polydisperse material based on picket fence of monodisperse spherical particles

TC 34 Food products

ISO/CD 20716 Oolong tea — General specification

TC 38 Textiles

ISO/CD 20615 Textiles — Measurement method of tribolectri-cal potential of fibre ropes

TC 41 Pulleys and belts (including veebelts)

ISO/CD 20238 Conveyor belts — Drum friction testing

TC 69 Applications of statistical methods

ISO/CD 7870-9 Control charts — Part 9: Control charts for autocorrelated processes

ISO/CD 5725-4 Accuracy (trueness and precision) of measure-ment methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/CD 18408 Simplified structural design guidelines for rein-forced concrete wall buildings

TC 102 Iron ore and direct reduced iron

ISO/CD 21283 Iron ores — Determination of specific surface area — Test method using air-permeability ap-paratus (Blaine)

TC 122 Packaging

ISO/DTS 17451-2

Packaging — Codification of contents for inventories for shipments of household goods and personal effects — Part 2: XML messaging structure for electronic transmission of inven-tory data

TC 131 Fluid power systems

ISO/CD 16028 Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications

TC 133 Clothing sizing systems - size designa-tion, size measurement methods and digital fittings

ISO/CD 8559-3 Size designation of clothes — Part 3: Method-ology for creating body measurement tables and intervals

ISO/CD 20947-1

Performance evaluation protocol for digital fit-ting systems — Part 1: Virtual garment

TC 135 Non-destructive testing

ISO/DTR 16829

Non-destructive testing — Automated ultra-sonic testing — Selection and application of systems

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD TS 22391-7

Plastics piping systems for hot and cold water installations — Polyethylene of raised tempera-ture resistance (PE-RT) — Part 7: Guidance for the assessment of conformity

TC 146 Air quality

ISO/CD 28902-3

Air quality — Environmental meteorology — Part 3: Ground-based remote sensing of wind by continuous-wave Doppler lidar

TC 171 Document management applications

ISO/CD 19005-4

Document management — Electronic docu-ment file format for long-term preservation — Part 4: Use of ISO 32000-2 (PDF/A-NEXT)

TC 173 Assistive products for persons with disability

ISO/CD 21801 Basic Principles and General Guidelines on Cognitive Accessibility

2 ISO Update, Supplement to ISO Focus -- October 2016

ISO/CD 21802 Assistive products for persons with disability — Guidelines on cognitive accessibility — Part 1: Daily time management

TC 178 Lifts, escalators and moving walks

ISO/CD 22199 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Emission

ISO/CD 22200 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity

ISO/DTS 25740-2

Safety requirements for escalators and moving walks — Part 2: Safety Parameters meeting GESR's

TC 197 Hydrogen technologies

ISO/CD 19880-5

Gaseous hydrogen — Fueling stations — Part 5: Hoses

TC 198 Sterilization of health care products

ISO/CD 14161 Sterilization of health care products — Biologi-cal indicators — Guidance for the selection, use and interpretation of results

TC 204 Intelligent transport systems

ISO/CD TS 20026

Intelligent transport systems — Cooperative ITS — Test architecture

TC 206 Fine ceramics

ISO/CD 19629 Fine Ceramics (advanced ceramics, advanced technical ceramics) — Thermophysical proper-ties of ceramic composites — Determination of thermal diffusivity

ISO/CD 20351 Fine ceramics (advanced ceramics, advanced technical ceramics) — Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere

ISO/CD 20379 Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of thixo-tropic behavior of ceramic slurry by use of a rotational viscometer

TC 211 Geographic information/Geomatics

ISO/CD 19165 Geographic information — Preservation of digital data and metadata

TC 215 Health informatics

IEC/CD 62304 Medical device software — Software life cycle processes

TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

ISO/DTS 24520

Service activities relating to drinking water sup-ply systems and wastewater systems — Crisis management — Good practice for technical aspects

TC 249 Traditional chinese medicine

ISO/CD 20334 Traditional Chinese Medicine — Coding Sys-tem of Formulas

TC 260 Human resource management

ISO/CD 30401 Human resource management — Knowledge management systems — Requirements

TC 265 Carbon dioxide capture, transportation, and geological storage

ISO/CD 27919-1

Carbon dioxide capture — Part 1: Performance evaluation methods for post-combustion CO2 capture integrated with a power plant

JTC 1 Information technology

ISO/IEC CD 30141

Internet of Things Reference Architecture (IoT RA)

ISO/IEC 24760-1:2011/PDAM 1

Information technology — Security techniques — A framework for identity management — Part 1: Terminology and concepts — Amend-ment 1

ISO/IEC 29115:2013/PDAM 1

Information technology — Security techniques — Entity authentication assurance framework — Amendment 1

ISO/IEC CD 30071-1

Information technology — Development of user interface accessibility — Part 1: A code of practice for creating accessible ICT products and services

ISO/IEC CD 30137-1

Use of biometrics in video surveillance systems — Part 1: Design and specification

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

PC 286 Collaborative business relationship management -- Framework

ISO/DIS 11000.2

* Collaborative business relation-ship management systems — Framework

2016-11-07

TC 4 Rolling bearings

ISO/DIS 12297-2

* Rolling bearings — Cylindrical rollers — Part 2: Ceramic rollers — Boundary dimensions, geo-metrical product specifications (GPS) and tolerance values

2016-12-22

TC 6 Paper, board and pulps

ISO/DIS 8791-3

* Paper and board — Determina-tion of roughness/smoothness (air leak methods) — Part 3: Sheffield method

2016-12-07

(Revision of ISO 8791-3:2005)


ISO/DIS 19891-1

* Ships and marine technology — Specifications for gas detectors intended for use on board ships — Part 1: Portable gas detec-tors for atmosphere testing of enclosed spaces

2016-11-29

(Revision of ISO/PAS 19891-1:2016)

ISO/DIS 6482 * Shipbuilding — Deck machinery — Warping end profiles

2016-11-30

(Revision of ISO 6482:1980)


ISO/DIS 7825 * Shipbuilding — Deck machinery — General requirements

2016-11-30


ISO/DIS 20438 * Ships and marine technology — Offshore mooring chains

2016-11-30


ISO/DIS 1464 * Aerospace — Tripod jacks — Clearance dimensions

2016-12-21


ISO/DIS 9667 * Aircraft ground support equip-ment — Tow bars

2016-12-21


ISO/DIS 9788 * Air cargo — Double stud tie-down fittings — Design and testing requirements

2016-12-21


ISO/DIS 10842 * Aircraft — Ground service con-nections — Locations and types

2016-12-21


ISO/DIS 11532 * Aircraft ground equipment — Graphical symbols

2016-11-25


ISO/DIS 21100 * Air cargo unit load devices — Performance requirements and test parameters

2016-12-21


TC 21 Equipment for fire protec-tion and fire fighting

ISO/DIS 7240-2

* Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment

2016-11-25


ISO/DIS 7240-4

* Fire detection and alarm sys-tems — Part 4: Power supply equipment

2016-11-25


TC 22 Road vehicles

ISO/DIS 26262-1

* Road vehicles — Functional safety — Part 1: Vocabulary

2016-12-14


ISO/DIS 26262-2

* Road vehicles — Functional safety — Part 2: Management of functional safety

2016-12-14


ISO/DIS 26262-3

* Road vehicles — Functional safety — Part 3: Concept phase

2016-12-14


ISO/DIS 26262-4

* Road vehicles — Functional safety — Part 4: Product devel-opment at the system level

2016-12-14


ISO/DIS 26262-5

* Road vehicles — Functional safety — Part 5: Product devel-opment at the hardware level

2016-12-14


ISO/DIS 26262-6

* Road vehicles — Functional safety — Part 6: Product devel-opment at the software level

2016-12-14


ISO/DIS 26262-7

* Road vehicles — Functional safety — Part 7: Produc-tion, operation, service and decommisssioning

2016-12-14


ISO/DIS 26262-8

* Road vehicles — Functional safety — Part 8: Supporting processes

2016-12-14


ISO/DIS 26262-9

* Road vehicles — Functional safety — Part 9: Automotive safety integrity level (ASIL)-oriented and safety-oriented analyses

2016-12-14


ISO/DIS 26262-10

* Road vehicles — Functional safety — Part 10: Guidelines on ISO 26262

2016-12-14


ISO/DIS 26262-11

* Road vehicles — Functional safety — Part 11: Guidelines on application of ISO 26262 to semiconductors

2016-12-14

ISO/DIS 26262-12

* Road vehicles — Functional safety — Part 12: Adaptation for motorcycles

2016-12-14

ISO/DIS 12619-8

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 8: Pressure indicator

2016-12-02

ISO/DIS 12619-9

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 9: Pressure relief valve (PRV)

2016-12-02

ISO/DIS 12619-10

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 10: Pressure relief valve (PRD)

2016-12-02

ISO/DIS 12619-11

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 11: Excess flow valve

2016-12-02

ISO/DIS 12619-12

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 12: Gas-tight housing and ventilation hoses

2016-12-02

ISO/DIS 12619-13

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 13: Rigid fuel line in stainless steel

2016-12-02


ISO/DIS 12619-14

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 14: Flexible fuel line

2016-12-02

ISO/DIS 12619-15

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 15: Filter

2016-12-02

ISO/DIS 12619-16

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 16: Fittings

2016-12-02


ISO/DIS 18497.2

* Agricultural machinery and tractors — Safety of highly automated agricultural machines — Complementary element

TC 28 Petroleum products and re-lated products of synthetic or biological origin

ISO/DIS 11365 * Petroleum and related prod-ucts — Maintenance and use guide for triaryl phosphate ester turbine control fluids

2016-12-20

(Revision of ISO/TS 11365:2011)

TC 31 Tyres, rims and valves

ISO/DIS 4223-1

* Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres

2016-11-29

(Revision of ISO 4223-1:2002, ISO 4223-1:2002/Amd 1:2011)

TC 34 Food products

ISO/DIS 18787 * Foodstuffs — Determination of water activity

2016-11-25

ISO 11133:2014/DAmd 1

* Microbiology of food, animal feed and water — Preparation, production, storage and perfor-mance testing of culture media — Amendment 1

2016-12-14

ISO 3656:2011/DAmd 1

* Animal and vegetable fats and oils — Determination of ultra-violet absorbance expressed as specific UV extinction — Amend-ment 1

2016-11-25

ISO/DIS 8588 * Sensory analysis — Methodol-ogy — "A" - "not A" test

2016-12-14


ISO/DIS 34101-1

* Sustainable and traceable cocoa beans — Part 1: Requirements for sustainability management systems

2016-12-05

ISO/DIS 34101-2

* Sustainable and traceable cocoa beans — Part 2: Requirements for performance (related to eco-nomic, social, and environmental aspects)

2016-12-05

ISO/DIS 34101-3

* Sustainable and traceable cocoa beans — Part 3: Requirements for traceability

2016-12-05

TC 35 Paints and varnishes

ISO/DIS 6270-3

* Paints and varnishes — Determi-nation of resistance to humidity — Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir)

2016-12-13

TC 37 Terminology and other language and content resources

ISO 17100:2015/DAmd 1

* Translation services — Require-ments for translation services — Amendment 1

2016-12-05

TC 39 Machine tools

ISO 10791-7:2014/DAmd 1

* Test conditions for machining centres — Part 7: Accuracy of finished test pieces — Amend-ment 1

2016-12-16


ISO/DIS 5295 * Synchronous belts — Calcula-tion of power rating and drive centre distance

2016-11-25


TC 42 Photography

ISO/DIS 18844 * Photography — Digital cameras — Image flare measurement

2016-11-25

TC 43 Acoustics

ISO/DIS 10848-1

* Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document

2016-11-28


ISO/DIS 10848-2

* Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence

2016-11-28

(Revision of ISO 10848-2:2006, ISO 10848-2:2006/Cor 1:2007)

ISO/DIS 10848-3

* Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence

2016-11-28


ISO/DIS 10848-4

* Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equip-ment sound between adjoining rooms — Part 4: Application to junctions with at least one Type A element

2016-11-28


TC 44 Welding and allied processes

ISO/DIS 22825 * Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys

2016-12-06



TC 46 Information and documentation

ISO/DIS 20614 * Data exchange protocol for inter-operability and preservation

2016-11-30

ISO/DIS 28500 * Information and documentation — WARC file format

2016-11-25


TC 59 Buildings and civil engi-neering works

ISO/DIS 13640 * Buildings and civil engineering works — Sealants — specifica-tions for test substrates

2016-12-21


TC 61 Plastics

ISO/DIS 22007-4

* Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method

2016-12-16


ISO 2797:1986/DAmd 1

* Textile glass — Rovings — Basis for a specification — Amend-ment 1

2016-12-20

ISO 3616:2001/DAmd 1

* Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression — Amendment 1

2016-12-20

ISO 5025:1997/DAmd 1

* Reinforcement products — Woven fabrics — Determination of width and length — Amend-ment 1

2016-12-20

ISO/DIS 19927 * Fibre-reinforced plastic com-posites — Determination of inter-laminar strength and modulus by double beamshear test

2016-12-22

TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 17782.2

* Petroleum, petrochemical and natural gas industries — Quali-fication of manufacturers of special materials

2016-11-04

ISO 3183:2012/DAmd 1

* Petroleum and natural gas indus-tries — Steel pipe for pipeline transportation systems — Amendment 1

ISO/DIS 35101 * Petroleum and natural gas industries — Arctic operations — Working environment

2016-12-05

TC 83 Sports and other rec-reational facilities and equipment

ISO/DIS 8364 * Alpine skis and bindings — Bind-ing mounting area — Require-ments and test methods

2016-12-05


ISO/DIS 10045 * Alpine skis — Binding mounting area — Requirements for test screws

2016-12-05


ISO/DIS 11088 * Alpine ski/binding/boot (S-B-B) system — Assembly, adjustment and inspection

2016-12-05


TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/DIS 22875 * Nuclear energy — Determina-tion of chlorine and fluorine in uranium dioxide powder and sintered pellets

2016-12-20


TC 96 Cranes

ISO/DIS 8686-5

* Cranes — Design principles for loads and load combinations — Part 5: Overhead travelling and portal bridge cranes

2016-11-25


TC 107 Metallic and other inorgan-ic coatings

ISO/DIS 2819 * Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coat-ings — Review of methods avail-able for testing adhesion

2016-12-09


TC 108 Mechanical vibration, shock and condition monitoring

ISO 7919-3:2009/DAmd 1

* Mechanical vibration — Evalu-ation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines — Amendment 1

2016-12-02

ISO 7919-4:2009/DAmd 1

* Mechanical vibration — Evalu-ation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings — Amend-ment 1

2016-12-02

ISO 10816-3:2009/DAmd 1

* Mechanical vibration — Evalu-ation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1

2016-12-02

ISO 10816-4:2009/DAmd 1

* Mechanical vibration — Evalu-ation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1

2016-12-02

ISO/DIS 20816-2

* Mechanical vibration — Meas-urement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

2016-11-30

(Revision of ISO 7919-2:2009, ISO 10816-2:2009)

ISO/DIS 21940-2

* Mechanical vibration — Rotor balancing — Part 2: Vocabulary

2016-12-05



TC 121 Anaesthetic and respiratory equipment

ISO/DIS 11195 * Gas mixers for medical use — Stand-alone gas mixers

2016-12-21


ISO/DIS 80601-2-55

* Medical electrical equipment — Part 2-55: Particular require-ments for the basic safety and essential performance of respira-tory gas monitors

(Revision of ISO 80601-2-55:2011)

ISO/DIS 20789 * Anaesthetic and respira-tory equipment — Passive humidifiers

2016-12-13

IEC/DIS 80601-2-59

* Medical electrical equipment — Part 2-59: Particular require-ments for the basic safety and essential performance of screen-ing thermographs for human febrile temperature screening

(Revision of IEC 80601-2-59:2008)

TC 126 Tobacco and tobacco products

ISO/DIS 20778 * Cigarettes — Routine analytical cigarette smoking machine — Definitions and standard condi-tions with an intense smoking regime

2016-12-21

ISO/DIS 20779 * Cigarettes — Generation and collection of total particulate matter using a routine analytical smoking machine with an in-tense smoking regime

2016-12-21

TC 127 Earth-moving machinery

ISO/DIS 17757 * Earth-moving machinery and mining — Autonomous and semi-autonomous machine system safety

2016-12-07

TC 130 Graphic technology

ISO/DIS 2846-1

* Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing

2016-12-19


ISO/DIS 12634.2

* Graphic technology — Determi-nation of tack of paste inks and vehicles by a rotary tackmeter

2016-11-19


ISO/DIS 13655.2

* Graphic technology — Spectral measurement and colorimetric computation for graphic arts images

2016-11-01


ISO/DIS 16613-1

* Graphic technology — Variable content replacement — Part 1: Using PDF/X for variable content replacement (PDF/VCR-1)

2016-12-02


ISO/DIS 6162-2

* Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76

2016-11-30


ISO/DIS 8434-1

* Metallic tube connections for fluid power and general use — Part 1: 24° cone connectors [revision of ISO 8434-1:2007]

2016-12-02


ISO/DIS 11943.2

* Hydraulic fluid power — On-line automatic particle-counting systems for liquids — Methods of calibration and validation

2016-11-19


ISO/DIS 12669 * Hydraulic fluid power — Method for determining the required cleanliness level (RCL) of a system

2016-12-12


ISO/DIS 12176-1

* Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

2016-12-12


ISO/DIS 21307.2

* Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems

2016-11-12


TC 147 Water quality

ISO/DIS 20899 * Water quality — Plutonium and neptunium — Test method using ICP-MS

2016-11-28

TC 157 Non-systemic contra-ceptives and STI barrier prophylactics

ISO/DIS 16038 * Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality manage-ment condoms

2016-12-12


ISO/DIS 25841.2

* Female condoms — Require-ments and test methods

2016-10-25


TC 159 Ergonomics

ISO/DIS 9241-940.3

* Ergonomics of human-system in-teraction — Part 940: Evaluation of tactile and haptic interactions

2016-11-02

TC 172 Optics and photonics

ISO/DIS 14135-1

* Optics and photonics — Speci-fications for telescopic sights — Part 1: General-purpose instruments

2016-11-28


ISO/DIS 14490-5

* Optics and photonics — Test methods for telescopic sys-tems — Part 5: Test methods for transmittance

2016-11-25



ISO/DIS 9849 * Optics and optical instruments — Geodetic and surveying instruments — Vocabulary

2016-12-20


TC 182 Geotechnics

ISO/DIS 17892-7

* Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined com-pression test

2016-12-21

(Revision of ISO/TS 17892-7:2004, ISO/TS 17892-7:2004/Cor 1:2006)

ISO/DIS 17892-8

* Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test

2016-12-21


ISO/DIS 17892-9

* Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated tri-axial compression tests on water saturated soils

2016-12-21


ISO/DIS 22477-5

* Geotechnical investigation and testing — Testing of geotechni-cal structures — Part 5: Testing of grouted anchors

2016-12-22

TC 184 Automation systems and integration

ISO 22400-2:2014/DAmd 1

* Automation systems and integra-tion — Key performance indica-tors (KPIs) for manufacturing operations management — Part 2: Definitions and descriptions — Amendment 1

2016-11-25

TC 188 Small craft

ISO/DIS 16147 * Small craft — Inboard diesel engines — Engine-mounted fuel, oil and electrical components

2016-12-09

(Revision of ISO 16147:2002, ISO 16147:2002/Amd 1:2013)

TC 190 Soil quality

ISO/DIS 20295 * Soil quality — Determination of perchlorate in soil using ion chromatography

2016-12-14

TC 198 Sterilization of health care products

ISO/DIS 11737-1

* Sterilization of health care prod-ucts — Microbiological methods — Part 1: Determination of a population of microorganisms on product

2016-12-21

(Revision of ISO 11737-1:2006, ISO 11737-1:2006/Cor 1:2007)


ISO/DIS 14813-6

* Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 6: Data presentation in ASN.1

2016-11-30


ISO/DIS 19237 * Intelligent transport systems — Pedestrian detection and collision mitigation systems (PD-CMS) — Performance require-ments and test procedures

2016-11-30


ISO/DIS 19628 * Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic compos-ites - Determination of specific heat capacity

2016-12-14

ISO/DIS 19810 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment — Measurement of water contact angle

2016-12-06

TC 221 Geosynthetics

ISO 10318-1:2015/DAmd 1

* Geosynthetics — Part 1: Terms and definitions — Amendment 1

2016-12-21

ISO 10318-2:2015/DAmd 1

* Geosynthetics — Part 2: Sym-bols and pictograms — Amend-ment 1

2016-12-21

ISO/DIS 13438 * Geotextiles and geotextile-related products — Screening test method for determining the resistance to oxidation

2016-12-06


TC 227 Springs

ISO 26910-1:2009/DAmd 1

* Springs — Shot peening — Part 1: General procedures — Amendment 1

2016-11-29

TC 282 Water reuse

ISO/DIS 20760-1

* Water reuse in urban areas — Guidelines for centralized water reuse system — Part 1: Design principle of a centralized water reuse system

2016-11-30

ISO/DIS 20760-2

* Water reuse in urban areas — Guidelines for centralized water reuse system — Part 2: Manage-ment of a centralized water reuse system

2016-11-30

TC 292 Security and resilience

ISO/DIS 34001.4

Security and resilience — Secu-rity management system for or-ganizations assuring authenticity, integrity and trust for products and documents

2016-11-04

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/DIS 20701 * Leather — Tests for colour fast-ness — Colour fastness to saliva

2016-11-29


ISO/IEC DIS 17203

* Information technology — Open Virtualization Format (OVF) specification

(Revision of ISO/IEC 17203:2011)


ISO/IEC DIS 21778

* The JSON data interchange format

2016-12-09

ISO/IEC/IEEE DIS 12207

* Systems and software engi-neering — Software life cycle processes

2016-12-14

(Revision of ISO/IEC 12207:2008)

ISO/IEC DIS 29110-4-1

* Systems and software engineer-ing — Lifecycle profiles for Very Small Entities (VSEs) — Part 4-1: Software engineering - Profile specifications: Generic profile group

2016-11-25

(Revision of ISO/IEC 29110-4-1:2011)

ISO/IEC 14496-22:2015/DAmd 2

* Information technology — Cod-ing of audio-visual objects — Part 22: Open Font For-mat — Amendment 2: Up-dated text layout features and implementations

2016-11-25

ISO/IEC DIS 14496-31.2

* Information technology — Cod-ing of audio-visual objects — Part 31: Video coding for browsers

2016-10-25

ISO/IEC DIS 18477-5

* Information technology — Scal-able compression and coding of continuous-tone still images — Part 5: Reference software

2016-12-02

ISO/IEC 21000-22/DAmd 1

* Information technology — Mul-timedia framework (MPEG-21) — Part 22: User Description — Amendment 1: Reference software for MPEG-21 user description

2016-11-25

ISO/IEC DIS 19823-10

* Information technology — Con-formance test methods for secu-rity service crypto suites — Part 10: Crypto suite AES-128

2016-11-30

ISO/IEC DIS 29167-10

* Information technology — Au-tomatic identification and data capture techniques — Part 10: Crypto suite AES-128 secu-rity services for air interface communications

2016-12-09

(Revision of ISO/IEC 29167-10:2015)

ISO/IEC DIS 19944

* Information technology — Cloud computing — Cloud services and devices: data flow, data categories and data use

2016-12-21

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates


ISO/FDIS 3036 * Board — Determination of punc-ture resistance

2016-11-22



ISO/FDIS 7718-1

* Aircraft — Passenger doors interface requirements for con-nection of passenger boarding bridge or passenger transfer vehicles — Part 1: Main deck doors

2016-11-15

(Revision of ISO 7718-1:2009, ISO 7718-1:2009/DAmd 1)

ISO/FDIS 7718-2

* Aircraft — Passenger doors interface requirements for con-nection of passenger boarding bridge or passenger transfer vehicles — Part 2: Upper deck doors

2016-11-15

(Revision of ISO 7718-2:2009, ISO 7718-2:2009/DAmd 1)

ISO/FDIS 16004

* Aircraft ground equipment — Passenger boarding bridge or transfer vehicle — Interface requirements with aircraft doors

2016-11-15

(Revision of ISO 16004:2005, ISO 16004:2005/DAmd 1)

TC 22 Road vehicles

ISO/FDIS 18541-6

* Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 6: L-Category vehicle specific RMI use cases and requirements

2016-11-10


ISO/FDIS 5682-1

* Equipment for crop protection — Spraying equipment — Part 1: Test methods for sprayer nozzles

2016-11-16


ISO/FDIS 5682-2

* Equipment for crop protection — Spraying equipment — Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers

2016-11-16


ISO/FDIS 5682-3

* Equipment for crop protection — Spraying equipment — Part 3: Test method to assess the performance of volume / area adjustment systems

2016-11-16


TC 34 Food products

ISO/FDIS 18465

* Microbiology of the food chain — Quantitative determination of emetic toxin (cereulide) using LC-MS/MS

2016-11-25

TC 35 Paints and varnishes

ISO/FDIS 3668 * Paints and varnishes — Visual comparison of colour of paints

2016-11-20


TC 38 Textiles


ISO/FDIS 14362-1

* Textiles — Methods for deter-mination of certain aromatic amines derived from azo color-ants — Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres

2016-11-19


ISO/FDIS 14362-3

* Textiles — Methods for determi-nation of certain aromatic amines derived from azo colorants — Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene

2016-11-19


TC 39 Machine tools

ISO/FDIS 13041-2

* Test conditions for numerically controlled turning machines and turning centres — Part 2: Geo-metric tests for machines with a vertical workholding spindle

2016-11-05



ISO/FDIS 703 * Conveyor belts — Transverse flexibility (troughability) — Test method

2016-12-07



ISO/FDIS 16338

* Welding for aerospace applica-tions — Resistance spot and seam welding

2016-11-18


TC 45 Rubber and rubber products

ISO/FDIS 6134 * Rubber hoses and hose as-semblies for saturated steam — Specification

2016-10-29


ISO/FDIS 11759

* Rubber hoses and hose as-semblies for dispensing lique-fied petroleum gases (LPGs) — Specification

2016-10-29


TC 58 Gas cylinders

ISO/FDIS 11114-4

* Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting steels resistant to hydrogen embrittlement

2016-11-05


TC 83 Sports and other rec-reational facilities and equipment

ISO/FDIS 8936 * Awnings for leisure accommoda-tion vehicles — Requirements and test methods

2016-11-19


TC 89 Wood-based panels

ISO/FDIS 27769

* Wood-based panels — Wet-process fibreboard

2016-11-05

(Revision of ISO 27769-1:2009, ISO 27769-2:2009)

TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/FDIS 20349-1

* Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 1: Requirements and test methods for protection against risks in foundries

2016-11-17


ISO/FDIS 20349-2

* Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 2: Requirements and test methods for protection against risks in welding and allied processes

2016-11-17


TC 107 Metallic and other inorgan-ic coatings

ISO/FDIS 19487

* Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite coatings

2016-11-08


ISO/FDIS 20283-5

* Mechanical vibration — Meas-urement of vibration on ships — Part 5: Guidelines for measure-ment, evaluation and reporting of vibration with regard to habitabil-ity on passenger and merchant ships

2016-11-19


TC 135 Non-destructive testing

ISO/FDIS 5577 * Non-destructive testing — Ultra-sonic testing — Vocabulary

2016-11-25



ISO/FDIS 15876-1

* Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General

2016-11-23


ISO/FDIS 15876-2

* Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes

2016-11-23


ISO/FDIS 15876-3

* Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings

2016-11-23


ISO/FDIS 15876-5

* Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fit-ness for purpose of the system

2016-11-23



ISO 15493:2003/FDAmd 1

* Plastics piping systems for industrial applications — Acry-lonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chlo-ride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) — Specifications for components and the system — Metric series — Amendment 1

2016-11-22

TC 150 Implants for surgery

ISO/FDIS 25539-1

* Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses

2016-11-22


TC 153 Valves

ISO/FDIS 6553 * Automatic steam traps — Marking

2016-11-22


TC 160 Glass in building

ISO/FDIS 18178

* Glass in building — Laminated solar photovoltaic glass for use in buildings

2016-11-05


ISO/FDIS 14705

* Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for hardness of monolithic ceramics at room temperature

2016-11-05


ISO/FDIS 20343

* Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Test method for deter-mining elastic modulus of thick ceramic coatings at elevated temperature

2016-11-20

TC 213 Dimensional and geometri-cal product specifications and verification

ISO/FDIS 1101 * Geometrical product specifica-tions (GPS) — Geometrical tol-erancing — Tolerances of form, orientation, location and run-out

2016-11-12


ISO/FDIS 1660 * Geometrical product specifica-tions (GPS) — Geometrical toler-ancing — Profile tolerancing

2016-11-12



ISO/FDIS 25237

* Health informatics — Pseudonymization

2016-11-11

IEC/FDIS 82304-1

* Health software — Part 1: Gen-eral requirements for product safety

2016-10-14

TC 219 Floor coverings

ISO/FDIS 20326

* Resilient floor coverings — Specification for floor panels for loose laying

2016-11-17

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/FDIS 2420 * Leather — Physical and me-chanical tests — Determination of apparent density and mass per unit area

2016-11-20


ISO/FDIS 4044 * Leather — Chemical tests — Preparation of chemical test samples

2016-11-08


ISO/FDIS 5402-1

* Leather — Determination of flex resistance — Part 1: Flexometer method

2016-11-19


ISO/FDIS 23910

* Leather — Physical and me-chanical tests — Measurement of stitch tear resistance

2016-11-20



ISO/IEC FDIS 26557

* Software and systems engineer-ing — Methods and tools for variability mechanisms in soft-ware and systems product line

2016-11-10

ISO/IEC 14443-3:2016/FDAmd 1

* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 1: Handling rules of RFU bits

2016-11-11

ISO/IEC 14443-4:2016/FDAmd 1

* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 4: Trans-mission protocol — Amendment 1: RFU handling rules

2016-11-11

ISO/IEC FDIS 14776-154

* Information technology — Small Computer System Interface (SCSI) — Part 154: Serial At-tached SCSI — 3 (SAS-3)

2016-10-29

ISO/IEC FDIS 19752

* Information technology — Office equipment — Method for the determination of toner cartridge yield for monochromatic electro-photographic printers and multi-function devices that contain printer components

2016-11-11

(Revision of ISO/IEC 19752:2004, ISO/IEC 19752:2004/Cor 1:2012)

ISO/IEC 14496-10:2014/FDAmd 3

* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 3: Additional Supplemental Enhancement Information

2016-11-05

ISO/IEC 14496-16:2011/FDAmd 3

* Information technology — Cod-ing of audio-visual objects — Part 16: Animation Framework eXtension (AFX) — Amendment 3: Printing material and 3D graphics coding for browsers

2016-11-05

ISO/IEC 23000-15:2016/FDAmd 1

* Information technology — Mul-timedia application format (MPEG-A) — Part 15: Multimedia preservation application format — Amendment 1: Implementa-tion Guidelines for MP-AF

2016-11-22

ISO/IEC 23001-10:2015/FDAmd 1

* Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata met-rics of media in ISO base media file format — Amendment 1: Car-riage of special information

2016-11-05


ISO/IEC 23002-5:2013/FDAmd 2

Information technology — MPEG video technologies — Part 5: Reconfigurable media coding conformance and reference soft-ware — Amendment 2: Refer-ence Software for HEVC-related VTL extensions

2016-11-22

ISO/IEC 23003-1:2007/FDAmd 3

* Information technology — MPEG audio technologies — Part 1: MPEG Surround — Amendment 3: MPEG Surround extension for 3D Audio

2016-11-05


* Information technology — Me-dia context and control — Part 7: Conformance and reference software

2016-11-18


ISO/IEC 23008-3:2015/FDAmd 3

Information technology — High efficiency coding and media delivery in heterogeneous en-vironments — Part 3: 3D audio — Amendment 3: MPEG-H 3D Audio Phase 2

2016-11-18

ISO/IEC FDIS 9075-1

* Information technology — Data-base languages — SQL — Part 1: Framework (SQL/Framework)

2016-11-05


ISO/IEC FDIS 9075-2

* Information technology — Data-base languages — SQL — Part 2: Foundation (SQL/Foundation)

2016-11-05

(Revision of ISO/IEC 9075-2:2011, ISO/IEC 9075-2:2011/Cor 1:2013, ISO/IEC 9075-2:2011/Cor 2:2015)

ISO/IEC FDIS 9075-3

* Information technology — Data-base languages — SQL — Part 3: Call-Level Interface (SQL/CLI)

2016-11-05


ISO/IEC FDIS 9075-4

* Information technology — Data-base languages — SQL — Part 4: Persistent stored modules (SQL/PSM)

2016-11-05


ISO/IEC FDIS 9075-9

* Information technology — Data-base languages — SQL — Part 9: Management of External Data (SQL/MED)

2016-11-05

(Revision of ISO/IEC 9075-9:2008, ISO/IEC 9075-9:2008/Cor 1:2010)


* Information technology — Data-base languages — SQL — Part 10: Object language bindings (SQL/OLB)

2016-11-05



* Information technology — Data-base languages — SQL — Part 11: Information and definition schemas (SQL/Schemata)

2016-11-05



* Information technology — Data-base languages — SQL — Part 13: SQL Routines and types using the Java TM programming language (SQL/JRT)

2016-11-05



* Information technology — Data-base languages — SQL — Part 14: XML-Related Specifications (SQL/XML)

2016-11-05

(Revision of ISO/IEC 9075-14:2011, ISO/IEC 9075-14:2011/Cor 1:2013, ISO/IEC 9075-14:2011/Cor 2:2015)


* Information technology — Ser-vice management — Part 6: Re-quirements for bodies providing audit and certification of service management systems

2016-11-10

Standards published

New International Standards published between 01 September and 30 September 2016


** French version of standard previously published in English only

Price

group

IIW International Institute of Welding

ISO 14272:2016

Resistance welding — Destructive test-ing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds

B


ISO 2470-1:2016

Paper, board and pulps — Measure-ment of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)

B


ISO 19356:2016

* Ships and marine technology — Ma-rine cranes — Test specifications and procedures

A

ISO 22472:2016

* Ships and marine technology — Guide-lines for the operation and installation of voyage data recorder (VDR)

F

TC 10 Technical product documentation

ISO 9177-1:2016

Mechanical pencils for technical draw-ings — Part 1: Classification, dimen-sions, performance requirements and testing

B



ISO 17851:2016

* Space systems — Space environment simulation for material tests — General principles and criteria

D

TC 21 Equipment for fire protection and fire fighting

ISO 14520-2:2016

* Gaseous fire-extinguishing systems — Physical properties and system design — Part 2: CF3I extinguishant

A

ISO 14520-5:2016

* Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant

B

ISO 14520-6:2016

* Gaseous fire-extinguishing systems — Physical properties and system design — Part 6: HCFC Blend A extinguishant

B

ISO 14520-8:2016

* Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant

B

ISO 14520-9:2016

* Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227ea extinguishant

B

ISO 14520-10:2016

* Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant

B

ISO 14520-11:2016

* Gaseous fire-extinguishing systems — Physical properties and system design — Part 11: HFC 236fa extinguishant

B

TC 22 Road vehicles

ISO 19365:2016

* Passenger cars — Validation of vehicle dynamic simulation — Sine with dwell stability control testing

B

TC 28 Petroleum products and related products of synthetic or biologi-cal origin

ISO 3924:2016 Petroleum products — Determination of boiling range distribution — Gas chromatography method

D

TC 29 Small tools

ISO 8051:2016 Long shank taps with nominal diam-eters from M3 to M10 — Full-diameter shank taps with recess

A

ISO 10898:2016

Spot drills

A

TC 34 Food products

ISO 12824:2016

Royal jelly — Specifications

E

TC 38 Textiles

ISO 1144:2016 Textiles — Universal system for desig-nating linear density (Tex System)

B


ISO 3677:2016 Filler metal for soldering and brazing — Designation

A

ISO 17672:2016

Brazing — Filler metals

D

ISO 20168:2016

Resistance welding — Locking tapers for electrode holders and electrode caps

A


ISO 1827:2016 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods

B

ISO 6235:2016 Rubber, raw — Determination of block polystyrene content — Ozonolysis method

A

ISO 2286-1:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass

A

ISO 2286-2:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

A

ISO 2286-3:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness

A

TC 61 Plastics

ISO 11469:2016

Plastics — Generic identification and marking of plastics products

A

ISO 11357-1:2016

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

E

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 14224:2016

* Petroleum, petrochemical and natural gas industries — Collection and ex-change of reliability and maintenance data for equipment

H

ISO 16961:2015

Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks

F

ISO 20088-1:2016

* Determination of the resistance to cryogenic spillage of insulation materi-als — Part 1: Liquid phase

D

TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use

ISO 8536-13:2016

Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact

A

TC 83 Sports and other recreational facilities and equipment


ISO 23537-1:2016

Requirements for sleeping bags — Part 1: Thermal and dimensional requirements

D

ISO 23537-2:2016

Requirements for sleeping bags — Part 2: Fabric and material properties

A

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 16645:2016

* Radiological protection — Medical electron accelerators — Requirements and recommendations for shielding design and evaluation

G

TC 87 Cork

ISO 2190:2016 Granulated cork — Determination of moisture content

A

TC 92 Fire safety

ISO/TS 19700:2016

* Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace

F

TC 94 Personal safety -- Protective clothing and equipment

ISO/TS 16975-2:2016

Respiratory protective devices — Se-lection, use and maintenance — Part 2: Condensed guidance to establishing and implementing a respiratory protec-tive device programme

C

TC 96 Cranes

ISO 4302:2016 Cranes — Wind load assessment

D

TC 106 Dentistry

ISO 17509:2016

Dentistry — Torque transmitter for handpieces

A

TC 107 Metallic and other inorganic coatings

ISO 19207:2016

Thermal spraying — Classification method of adhesive strength by indentation

C

ISO 19477:2016

Metallic and other inorganic coatings — Measurement of Young's modulus of thermal barrier coatings by beam bending

C


ISO 10815:2016

Mechanical vibration — Measurement of vibration generated internally in rail-way tunnels by the passage of trains

D

ISO/TS 14837-32:2015

Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground

G

TC 110 Industrial trucks

ISO 10896-7:2016

* Rough-terrain trucks — Safety require-ments and verification — Part 7: Longi-tudinal load moment systems

B

TC 113 Hydrometry

ISO 6420:2016 * Hydrometry — Position fixing equip-ment for hydrometric boats

B

TC 121 Anaesthetic and respiratory equipment

ISO 5366:2016 Anaesthetic and respiratory equipment — Tracheostomy tubes and connectors

D

TC 123 Plain bearings

ISO 12131-2:2016

* Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings

B

ISO 12167-1:2016

* Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves

E

ISO 20054:2016

* Plain bearings — Bearings containing dispersed solid lubricants

B


ISO 9244:2008/Amd 1:2016

Earth-moving machinery — Machine safety labels — General principles — Amendment 1

XZ


ISO 1219-3:2016

* Fluid power systems and components — Graphical symbols and circuit dia-grams — Part 3: Symbol modules and connected symbols in circuit diagrams

D

ISO/TS 11672:2016

* Connectors for fluid power and general use — Designation and nomenclature

C


ISO 13779-6:2015

Implants for surgery — Hydroxyapatite — Part 6: Powders

B

ISO 7206-2:2011/Amd 1:2016

Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulat-ing surfaces made of metallic, ceramic and plastics materials — Amendment 1

XZ

ISO 7206-12:2016

Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells

B

ISO 14242-2:2016

Implants for surgery — Wear of total hip-joint prostheses — Part 2: Methods of measurement

A

ISO 14243-2:2016

Implants for surgery — Wear of total knee-joint prostheses — Part 2: Meth-ods of measurement

A

TC 159 Ergonomics

ISO 6385:2016 Ergonomics principles in the design of work systems

C

TC 164 Mechanical testing of metals

ISO 27306:2016

* Metallic materials — Method of con-straint loss correction of CTOD fracture toughness for fracture assessment of steel components

F


TC 165 Timber structures

ISO 18402:2016

* Timber structures — Structural insu-lated panel roof construction — Test methods

D


ISO 10938:2016

Ophthalmic optics — Chart displays for visual acuity measurement — Printed, projected and electronic

A

ISO 11381:2016

Ophthalmic optics — Spectacle frames — Screw threads

A

TC 180 Solar energy

ISO 22975-1:2016

Solar energy — Collector components and materials — Part 1: Evacuated tubes — Durability and performance

E

ISO 22975-2:2016

Solar energy — Collector components and materials — Part 2: Heat-pipes for solar thermal application — Durability and performance

D

TC 182 Geotechnics

ISO 22477-10:2016

* Geotechnical investigation and testing — Testing of geotechnical structures — Part 10: Testing of piles: rapid load testing

D


ISO 8000-100:2016

* Data quality — Part 100: Master data: Exchange of characteristic data: Overview

C

ISO 8000-120:2016

* Data quality — Part 120: Master data: Exchange of characteristic data: Provenance

D

ISO 8000-130:2016

* Data quality — Part 130: Master data: Exchange of characteristic data: Accuracy

B

ISO 8000-140:2016

* Data quality — Part 140: Master data: Exchange of characteristic data: Completeness

B

TC 199 Safety of machinery

ISO/TR 22100-3:2016

* Safety of machinery — Relationship with ISO 12100 — Part 3: Implementa-tion of ergonomic principles in safety standards

F

TC 201 Surface chemical analysis

ISO 15471:2016

* Surface chemical analysis — Auger electron spectroscopy — Description of selected instrumental performance parameters

A

ISO 17973:2016

* Surface chemical analysis — Medium-resolution Auger electron spectrom-eters — Calibration of energy scales for elemental analysis

B


ISO 18495-1:2016

* Intelligent transport systems — Com-mercial freight — Automotive visibility in the distribution supply chain — Part 1: Architecture and data definitions

D

ISO 19079:2016

* Intelligent transport systems — Com-munications access for land mobiles (CALM) — 6LoWPAN networking

D


ISO 18610:2016

* Fine ceramics (advanced ceram-ics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determina-tion of elastic properties by ultrasonic technique

D

TC 209 Cleanrooms and associated controlled environments

ISO 14644-14:2016

Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration

D


ISO 19104:2016

* Geographic information — Terminology

H

ISO 19160-1:2015

Addressing — Part 1: Conceptual model

G

TC 213 Dimensional and geometrical product specifications and verification

ISO 10360-12:2016

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 12: Articulated arm coor-dinate measurement machines (CMM)

F

ISO 18391:2016

Geometrical product specifications (GPS) — Population specification

C


ISO/IEEE 11073-10418:2014/Cor 1:2016

* Health informatics — Personal health device communication — Part 10418: Device specialization — International Normalized Ratio (INR) monitor — Technical Corrigendum 1

free

TC 220 Cryogenic vessels

ISO 21028-1:2016

Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C

B

TC 228 Tourism and related services

ISO 17679:2016

* Tourism and related services — Well-ness spa — Service requirements

C

TC 229 Nanotechnologies

ISO/TR 16196:2016

* Nanotechnologies — Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials

C

TC 244 Industrial furnaces and associ-ated processing equipment

ISO 13577-1:2016

* Industrial furnaces and associated pro-cessing equipment — Safety — Part 1: General requirements

F


ISO 13577-3:2016

* Industrial furnaces and associated pro-cessing equipment — Safety — Part 3: Generation and use of protective and reactive atmosphere gases

G

TC 257 Evaluation of energy savings

ISO 17743:2016

Energy savings — Definition of a methodological framework applicable to calculation and reporting on energy savings

C

TC 266 Biomimetics

ISO 18457:2016

* Biomimetics — Biomimetic materials, structures and components

F

TC 274 Light and lighting

ISO/CIE 11664-5:2016

Colorimetry — Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chro-maticity scale diagram

B

TC 299 Robotics

ISO 18646-1:2016

Robotics — Performance criteria and related test methods for service robots — Part 1: Locomotion for wheeled robots

C


ISO/IEC TS 33072:2016

* Information technology — Process assessment — Process capability assessment model for information security management

H

ISO/IEC 27036-4:2016

* Information technology — Security techniques — Information security for supplier relationships — Part 4: Guide-lines for security of cloud services

D

ISO/IEC 23003-3:2012/Cor 3:2015

* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Cor-rigendum 3

free

ISO/IEC 15459-1:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 1: Individual transport units

B

ISO/IEC 15459-4:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 4: Individual products and product packages

B

ISO/IEC 15459-5:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 5: Individual returnable transport items (RTIs)

B

ISO/IEC 15459-6:2014

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 6: Groupings

B

ISO/IEC 9995-9:2016

Information technology — Keyboard layouts for text and office systems — Part 9: Multi-lingual, multiscript keyboard layouts

H

ISO/IEC 19794-5:2005

* Information technology — Biometric data interchange formats — Part 5: Face image data

H

ISO/IEC 29794-1:2016

* Information technology — Biometric sample quality — Part 1: Framework

D

ISO/IEC 19086-1:2016

* Information technology — Cloud computing — Service level agreement (SLA) framework — Part 1: Overview and concepts

E

ISO/IEC TR 30132-1:2016

* Information technology — Information technology sustainability — Energy efficient computing models — Part 1: Guidelines for energy effectiveness evaluation

D

ISO/IEC TR 38504:2016

* Governance of information technol-ogy — Guidance for principles-based standards in the governance of infor-mation technology

B

Standards confirmed

The following International Standards are confimred for a five year period:

TC 4 Rolling bearings

ISO/TS 16281:2008

(reconfirmed)

ISO 20516:2007 (reconfirmed)


ISO 5350-3:2007 (reconfirmed)

ISO 10376:2011





ISO 11893:2011

ISO 17566:2011


ISO 11783-11:2011

ISO 11783-13:2011

TC 24 Particle characterization including sieving







TC 29 Small tools
















TC 33 Refractories




TC 34 Food products

ISO 3720:2011

ISO 11287:2011









TC 38 Textiles






TC 43 Acoustics

ISO/TS 13473-4:2008











ISO 15609-5:2011

ISO 17654:2011


ISO 188:2011

TC 60 Gears




TC 61 Plastics




ISO 10640:2011


ISO 22196:2011



ISO 8873-1:2006

ISO 8873-2:2007


TC 83 Sports and other recreational facilities and equipment

ISO 7794:2011

ISO 10228:2011

TC 85 Nuclear energy, nuclear technologies, and radiological protection


ISO 20785-2:2011

TC 89 Wood-based panels


TC 91 Surface active agents













TC 94 Personal safety -- Protective clothing and equipment

ISO/TS 16976-7:2013

ISO/TS 16976-8:2013

TC 106 Dentistry


ISO 10451:2010

TC 107 Metallic and other inorganic coatings


TC 108 Mechanical vibration, shock and condi-tion monitoring







ISO 18436-1:2012

TC 113 Hydrometry


TC 118 Compressors and pneumatic tools, machines and equipment

ISO 28927-10:2011

TC 126 Tobacco and tobacco products

ISO/TS 7821:2005 (reconfirmed)














ISO 15143-1:2010

ISO/TS 15998-2:2012

ISO 22448:2010

TC 130 Graphic technology

ISO 12640-4:2011

TC 134 Fertilizers and soil conditioners




TC 145 Graphical symbols

ISO 3864-1:2011

TC 147 Water quality

ISO 5667-13:2011

ISO 5667-23:2011



ISO 7207-2:2011


TC 156 Corrosion of metals and alloys

ISO 8565:2011


TC 163 Thermal performance and energy use in the built environment

ISO 18292:2011

TC 164 Mechanical testing of metals

ISO 13314:2011




ISO/TS 10303-436:2006

(reconfirmed)

TC 190 Soil quality





ISO 28600:2011


ISO 10677:2011

ISO 13124:2011


TC 207 Environmental management



TC 209 Cleanrooms and associated controlled environments




TC 213 Dimensional and geometrical product specifications and verification

ISO 8015:2011

ISO/TS 8062-2:2013

ISO 10360-7:2011

ISO 14253-2:2011

ISO 14253-3:2011

ISO 16610-21:2011

ISO/TS 17863:2013

ISO/TS 23165:2006

(reconfirmed)

TC 219 Floor coverings

ISO 10965:2011

TC 220 Cryogenic vessels



TC 221 Geosynthetics

ISO 10769:2011

ISO 10773:2011

TC 226 Materials for the production of primary aluminium









TC 256 Pigments, dyestuffs and extenders



TC 292 Security and resilience



ISO/IEC 16262:2011

ISO/IEC 10995:2011

ISO/IEC 12862:2011

ISO/IEC 7942-3:1999

(reconfirmed)

ISO/IEC 7942-4:1998

(reconfirmed)

ISO/IEC 8632-1:1999

(reconfirmed)

ISO/IEC 8632-3:1999

(reconfirmed)


ISO/IEC 8632-4:1999

(reconfirmed)




ISO/IEC 8651-4:1995

(reconfirmed)


ISO/IEC 9593-1:1990

(reconfirmed)

ISO/IEC 9593-3:1990

(reconfirmed)

ISO/IEC 9593-4:1991

(reconfirmed)

ISO/IEC 9636-1:1991

(reconfirmed)

ISO/IEC 9636-2:1991

(reconfirmed)

ISO/IEC 9636-3:1991

(reconfirmed)

ISO/IEC 9636-4:1991

(reconfirmed)

ISO/IEC 9636-5:1991

(reconfirmed)

ISO/IEC 9636-6:1991

(reconfirmed)

ISO/IEC 10641:1993

(reconfirmed)

ISO/IEC 12087-1:1995

(reconfirmed)

ISO/IEC 12087-3:1995

(reconfirmed)

ISO/IEC 12087-5:1998

(reconfirmed)

ISO/IEC 12088-4:1995

(reconfirmed)

ISO/IEC 14478-1:1998

(reconfirmed)

ISO/IEC 14478-2:1998

(reconfirmed)

ISO/IEC 14478-3:1998

(reconfirmed)

ISO/IEC 14478-4:1998

(reconfirmed)

ISO/IEC 14165-115:2006

(reconfirmed)

ISO/IEC 14165-131:2000

(reconfirmed)

ISO/IEC 14165-211:1999

(reconfirmed)

ISO/IEC 24702:2006

(reconfirmed)

ISO/IEC 18050:2006

(reconfirmed)

ISO/IEC 29103:2011

ISO/IEC TS 13249-7:2013

ISO/IEC 14957:2010

ISO/IEC 19502:2005

(reconfirmed)

ISO/IEC 19503:2005

(reconfirmed)

ISO/IEC 19756:2011

ISO/IEC 13066-1:2011

ISO/IEC 19788-2:2011

ISO/IEC 19784-4:2011

ISO/IEC 19795-1:2006

(reconfirmed)

ISO/IEC 19795-5:2011

ISO/IEC 19795-7:2011

ISO/IEC 24709-3:2011

ISO/IEC 29109-10:2010

Standards withdrawn


TC 22 Road vehicles

ISO 8820-7:2007 (replaced by )

TC 106 Dentistry

ISO/TR 11175:1993

(replaced by )


ISO/TS 8000-100:2009

(replaced by ISO 8000-100:2016)

ISO/TS 8000-120:2009


ISO/TS 8000-130:2009


ISO/TS 8000-140:2009


TC 208 Thermal turbines for industrial applica-tion (steam turbines, gas expansion turbines)

ISO 14661:2000/Amd 1:2002

(replaced by )


ISO/TS 19104:2008

(replaced by ISO 19104:2016)

Meeting calendar

(update at 01 September 2016)

Meetings called for the month of August are not in this edition.

* Information definite but meeting not yet formally convened


** Provisional

October 2016

2-7 Seattle (USA) TC 184/SC 4 Automation systems and integration/Indus-trial data

2-7 Auckland (New Zealand)


3-7 Pretoria (South Africa)

PC 273 Customer contact centres

3-7 Matsue (Japan) TC 183 Copper, lead, zinc and nickel ores and concentrates

4-7 London (United Kingdom)

TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids

5 London (United Kingdom)

TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters

5 Helsinki (Finland) TC 82/SC 7 Mining/Mine closure and reclamation management

5-6 Chicago (USA) TC 105 Steel wire ropes

5-7 Madrid (Spain) TC 225 Market, opinion and social research

5-10 Berlin (Germany) TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works

6 Virtual (Unknown)

President's committee

President's committee

6 Tokyo (Japan) TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment

6 Paris (France) TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

6 Helsinki (Finland) TC 82 Mining

6 Berlin (Germany) TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)

6 Berlin (Germany) TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)

6-7 Berlin (Germany) TC 119 Powder metallurgy

7 Berlin (Germany) TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals

10 Berlin (Germany) TC 59/SC 18 Buildings and civil en-gineering works/Con-struction procurement

10-13 Bucarest (Romania)

TC 172/SC 1 Optics and photon-ics/Fundamental standards

10-14 Hoffman Estates, Illinois (USA)

TC 58/SC 2 Gas cylinders/Cylin-der fittings

10-14 Tokyo (Japan) TC 153 Valves

10-14 Redlands (USA) TC 251 Asset management

11 Berlin (Germany) TC 59 Buildings and civil engineering works

11-12 Beijing (China) TC 298 Rare earth

12 Vienna (Austria) TC 83/SC 4 Sports and other rec-reational facilities and equipment/Snows-ports equipment

12 Reykjavik (Iceland)

TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications

12-13 Hangzhou (China)

TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement

12-14 Berlin (Germany) JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification

12-14 Norwood (USA) TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water

13-15 Seoul (Korea, Republic of)


14 Hangzhou (China)

TC 70 Internal combustion engines

14 Tokyo (Japan) TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology

14-24 Pittsburgh (USA) TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

15 Seoul (Korea, Republic of)

TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry

17-21 Berlin (Germany) JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

17-21 Moscow (Rus-sian Federation)



TC 58/SC 3 Gas cylinders/Cylin-der design

17-21 Sydney (Australia)

TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection

17-21 Berlin (Germany) TC 154 Processes, data elements and documents in com-merce, industry and administration

17-21 Berlin (Germany) TC 181 Safety of toys

17-21 Amman (Jordan) TC 262 Risk management

18 Shanghai (China) TC 2/SC 14 Fasteners/Surface coatings

18 Moscow (Rus-sian Federation)

TC 20/SC 6 Aircraft and space vehicles/Standard atmosphere


18 Kyoto (Japan) TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)

18-20 Madrid (Spain) TC 216 Footwear

19 Shanghai (China) TC 2/SC 7 Fasteners/Reference standards

19 Tokyo (Japan) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)

19 Moscow (Rus-sian Federation)

TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology


TC 92/SC 3 Fire safety/Fire threat to people and environment

19 Kyoto (Japan) TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

19 Kyoto (Japan) TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels

19-20 Miami (USA) TC 44/SC 14 Welding and allied processes/Weld-ing and brazing in aerospace

19-21 Berlin (Germany) TC 46/SC 8 Information and documentation/Quality - Statistics and performance evaluation

19-21 Philadelphia (USA)

TC 202 Microbeam analysis

20 Shanghai (China) TC 2/SC 12 Fasteners/Fasteners with metric internal thread

20 Shanghai (China) TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints


TC 92/SC 1 Fire safety/Fire initia-tion and growth

20 Madrid (Spain) TC 137 Footwear sizing des-ignations and marking systems

20 Kyoto (Japan) TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications

20 Kyoto (Japan) TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications

20 Kyoto (Japan) TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials

20 Kyoto (Japan) TC 138/SC 8 Plastics pipes, fittings and valves for the transport of fluids/Re-habilitation of pipeline systems

20 Crete (Greece) TC 180/SC 1 Solar energy/Climate - Measurement and data

20-21 Tokyo (Japan) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete


TC 58 Gas cylinders

21 Shanghai (China) TC 2 Fasteners

21 Shanghai (China) TC 2/SC 11 Fasteners/Fasteners with metric external thread

21 Shanghai (China) TC 5 Ferrous metal pipes and metallic fittings


TC 92/SC 4 Fire safety/Fire safety engineering

21 Kyoto (Japan) TC 138 Plastics pipes, fittings and valves for the transport of fluids

21 Crete (Greece) TC 180 Solar energy

21 Vienna (Austria) TC 227 Springs

22-23 Orlando (USA) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

24 Tokyo (Japan) TC 79/SC 9 Light metals and their alloys/Symbolization

24-26 Beijing (China) PC 280 Management Consultancy

24-26 Tokyo (Japan) TC 79/SC 11 Light metals and their alloys/Titanium

24-27 Washington, D.C (USA)

PC 305 Sustainable non-sewered sanitation systems

24-27 Osaka (Japan) TC 126 Tobacco and tobacco products

24-28 Tokyo (Japan) TC 79 Light metals and their alloys

24-28 Tokyo (Japan) TC 164 Mechanical testing of metals


TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

24-28 Paris (France) TC 190 Soil quality

24-28 Saint-Denis (France)

TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

24-28 Saint-Denis (France)

TC 190/SC 4 Soil quality/Biological methods

24-28 Athens (Greece) TC 258 Project, programme and portfolio management

25 Tokyo (Japan) TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots


25 Tokyo (Japan) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys

25 Osaka (Japan) TC 126/SC 3 Tobacco and tobacco products/Vape and vapour products

25-26 Kyoto (Japan) TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

25-28 Berlin (Germany) TC 35/SC 12 Paints and varnishes/Preparation of steel substrates before ap-plication of paints and related products

25-28 Berlin (Germany) TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures

26 Osaka (Japan) TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests

26-28 Tokyo (Japan) TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes

27 Oslo (Norway) TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

27 Tokyo (Japan) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

27 Osaka (Japan) TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco

27 Frankfurt (Germany)

TC 131/SC 3 Fluid power systems/Cylinders

27 La Plaine St-Denis (France)

TC 190/SC 7 Soil quality/Soil and site assessment

27-28 Orlando (USA) TC 17/SC 12 Steel/Continuous mill flat rolled products


TC 123 Plain bearings

28 Paris (France) TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

October-November 2016

30-4 Kuala Lumpur (Malaysia)


31-4 Cheonan (Korea, Republic of)

TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection


TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies


TC 45/SC 2 Rubber and rubber products/Testing and analysis

November 2016

1-4 Arlington (USA) * TC 22/SC 36 Road vehicles/Safety and impact testing

3 Kuala Lumpur (Malaysia)

TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

4 Frankfurt (Germany)

TC 291 Domestic gas cook-ing appliances


TC 241 Road traffic safety management systems

7-8 Tel Aviv (Israel) TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems

7-11 Orlando (USA) PC 302 Guidelines for audit-ing management systems

7-11 Delft (Netherlands)

TC 210 Quality management and corresponding general aspects for medical devices

7-11 Singapore (Singapore)

TC 229 Nanotechnologies

7-11 Tel Aviv (Israel) TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation

7-12 Lillehammer (Norway)

** JTC 1 Information technology

8-9 Düsseldorf (Germany)

TC 17/SC 4 Steel/Heat treatable and alloy steels

8-10 Kobe (Japan) TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

9 Sydney (Australia)

TC 98/SC 1 Bases for design of structures/Terminol-ogy and symbols

9-10 Tel Aviv (Israel) TC 282/SC 2 Water reuse/Water reuse in urban areas


* TC 309 Organizational governance


TC 98/SC 2 Bases for design of structures/Reliability of structures


TC 98/SC 3 Bases for design of structures/Loads, forces and other actions

10 Tel Aviv (Israel) TC 282 Water reuse

10-11 Bern (Switzerland)

TC 34/SC 12 Food products/Sen-sory analysis

10-11 Busan (Korea, Republic of)

TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction


TC 98 Bases for design of structures

13-17 Lillehammer (Norway)


14 Berlin (Germany) TC 83/SC 6 Sports and other recreational facilities and equipment/Mar-tial arts

14-15 Milton (Canada) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

14-15 Milton (Canada) TC 44/SC 10 Welding and allied processes/Quality management in the field of welding

14-18 Toronto (Canada) TC 44 Welding and allied processes


15-16 Toronto (Canada) TC 44/SC 7 Welding and allied processes/Represen-tation and terms

15-17 Boulogne Billan-court (France)

* TC 22/SC 39 Road vehicles/Ergonomics

15-18 Linyi (China) TC 134 Fertilizers and soil conditioners

16 Milton (Canada) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds

16 Toronto (Canada) TC 44/SC 9 Welding and allied processes/Health and safety

17 Oslo (Norway) TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations

17 Hiroshima City (Japan)

TC 244 Industrial furnaces and associated pro-cessing equipment

17-18 Orlando (USA) TC 299 Robotics

18 Rome (Italy) TC 160/SC 1 Glass in build-ing/Product considerations

18 Rome (Italy) TC 160/SC 2 Glass in building/Use considerations


PC 303 Guidelines on con-sumer warranties and guarantees

21-24 Wellington (New Zealand)

TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

21-24 Toronto (Canada) TC 272 Forensic sciences

21-25 Beijing (China) PC 287 Chain of custody of wood and wood-based products

24 Brussels (Belgium)

TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection


TC 281 Fine Bubble Technology

24-26 Istanbul (Turkey) TC 34/SC 3 Food products/Fruits and vegetables and their derived products

25 Tokyo (Japan) TC 300 Solid recovered fuels

November-December 2016

27-2 Rotterdam (Netherlands)

TC 176 Quality management and quality assurance

28-2 Redlands (USA) * TC 211 Geographic in-formation/Geomatics

29-1 Tokyo (Japan) PC 294 Guidance on unit pricing

30-2 Kurashiki (Japan) TC 172/SC 9 Optics and photon-ics/Electro-optical systems

December 2016


TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

1-2 Sapporo (Japan) TC 265 Carbon dioxide capture, transporta-tion, and geological storage

1-2 Paris (France) * TC 297 Waste management, recycling and road operation service


TC 217 Cosmetics

6-8 Lübeck (Germany)

TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment

6-9 Rio de Janeiro (Brazil)

PC 277 Sustainable procurement

6-9 Dublin (Ireland) TC 275 Sludge recovery, recycling, treatment and disposal

8 Clearwater (USA) TC 83/SC 5 Sports and other recreational facilities and equipment/Ice hockey equipment and facilities

8-9 Petten (Netherlands)

TC 197 Hydrogen technologies

9 Beijing (China) TC 34/SC 6 Food products/Meat, poultry, fish, eggs and their products

9 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

15-16 Erlangen (Germany)

TC 184/SC 1 Automation systems and integration/Physi-cal device control

January 2017


TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment

17-20 Tokyo (Japan) ** TC 107 Metallic and other inorganic coatings

(Unknown) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

February 2017

2 Tucson (USA) TC 261 Additive manufacturing

6-10 Tunis (Tunisia) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

6-10 Berlin (Germany) ** JTC 1/SC 35 Information technol-ogy/User interfaces

6-12 (South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

20 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment


* TC 8/SC 8 Ships and marine technology/Ship design


** TMB Technical Manage-ment Board

22-24 Paris (France) * TC 147/SC 3 Water qual-ity/Radioactivity measurements

Chennai (India) ** TC 120 Leather


March 2017

6 Kyoto (Japan) ** TC 60 Gears

16-17 Geneva (Switzerland)

** COUNCIL Council

20-24 Leeds (United Kingdom)

* TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

27-31 Chengdu (China) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

29 Philadelphia (USA)

* TC 219 Floor coverings

April 2017

3-4 Chicago (USA) TC 117 Fans

3-7 Stockholm (Sweden)

* TC 118 Compressors and pneumatic tools, ma-chines and equipment


* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines


* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems


* TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding

17-21 Hangzhou (China)


22-26 Faro, Algarve (Portugal)

* TC 282/SC 2 Water reuse/Water reuse in urban areas

24-25 Hamilton (New Zealand)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

24-28 Jeju (Korea, Republic of)

* TC 292 Security and resilience


* TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

26-27 Vancouver (Canada)

* CASCO Committee on con-formity assessment

Toulouse (France)

** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

Toulouse (France)

** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

Toulouse (France)

** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims

Orlando (USA) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

Orlando (USA) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

(Unknown) ** TC 34/SC 15 Food products/Coffee

(Côte-d'Ivoire) ** TC 34/SC 18 Food products/Cocoa

May 2017

7-12 Oslo (Norway) * TC 184/SC 4 Automation systems and integration/Indus-trial data

8 Berlin (Germany) * TC 171/SC 1 Document manage-ment applications/Quality, preserva-tion and integrity of information


* TC 10 Technical product documentation

8-12 Vienna (Austria) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools


* TC 161 Controls and protec-tive devices for gas and/or oil

8-12 Berlin (Germany) ** TC 171 Document manage-ment applications

11 Stockholm (Sweden)

** TC 10/SC 1 Technical product documentation/Basic conventions

15-18 (USA) ** TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear in-stallations, processes and technologies


* TC 4 Rolling bearings

15-19 Seattle (USA) * TC 31 Tyres, rims and valves

15-19 Seattle (USA) * TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims

15-19 Seattle (USA) * TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims

15-19 Rio de Janeiro (Brazil)

TC 68 Financial services

18 Busan (Korea, Republic of)

* TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe


** COPOLCO Committee on con-sumer policy

22-26 Pretoria (South Africa)

* TC 46/SC 4 Information and documentation/Tech-nical interoperability

22-26 (USA) ** TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines


* TC 193/SC 1 Natural gas/Analysis of natural gas

22-26 (Panama) ** TC 228 Tourism and related services

22-26 Faro, Algarve (Portugal)

TC 282 Water reuse


23-25 (Japan) ** TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection

25-26 Hannover (Germany)

* TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

(Japan) ** JTC 1/SC 32 Information technolo-gy/Data management and interchange

Stockholm (Sweden)

** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

Stockholm (Sweden)

** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation

(Sweden) ** TC 29 Small tools

(Unknown) ** TC 226 Materials for the production of primary aluminium

May-June 2017

27-2 (Ireland) ** TC 238 Solid biofuels

29-2 Okayama (Japan)

* JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance

31-2 Delft (Netherlands)

** TC 145 Graphical symbols

June 2017

5-9 (Unknown) ** TC 268 Sustainable cities and communities

5-9 (Unknown) ** TC 268/SC 1 Sustainable cities and communities/Smart community infrastructures

6-9 Jeju (Korea, Republic of)

** TC 156 Corrosion of metals and alloys

7-9 (USA) ** TC 220 Cryogenic vessels

8-9 Cambridge (Unit-ed Kingdom)

* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

12-16 Paris (France) * TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

12-16 Shanghai (China) * TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

14-15 Geneva (Switzerland)

** TMB Technical Manage-ment Board


* JTC 1/SC 28 Information technol-ogy/Office equipment


* TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects

19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/Microbiology

19-23 Cape Town (South Africa)

* TC 69 Applications of statis-tical methods


* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols


* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management


* TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results


* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma


* TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development

19-23 (Portugal) ** TC 149/SC 1 Cycles/Cycles and major sub-assemblies

23-30 (Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training


* TC 193 Natural gas


* TC 193/SC 3 Natural gas/Upstream area

(USA) ** TC 42 Photography

(Unknown) ** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems

Delft (Netherlands)

** TC 274 Light and lighting

2nd Quarter 2017

(Korea, Repub-lic of)

** TC 6 Paper, board and pulps

Tsukuba (Japan) ** TC 92 Fire safety

(India) ** TC 113 Hydrometry

July 2017

12 Milan (Italy) ** TC 206 Fine ceramics

22 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information

24-28 Paris (France) * JTC 1/SC 35 Information technol-ogy/User interfaces

(Unknown) ** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

August 2017



* JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

September 2017

4-8 Berlin (Germany) * TC 21 Equipment for fire protection and fire fighting

11-15 San Francisco (USA)

* JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms


** TC 17/SC 17 Steel/Steel wire rod and wire products

11-15 Gaithersburg (USA)

* TC 108 Mechanical vibration, shock and condition monitoring

11-15 Gaithersburg (USA)

* TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems


* TC 61 Plastics


* TC 164 Mechanical testing of metals

18 Berlin (Germany) * COUNCIL Council


* TC 290 Online reputation

19 Berlin (Germany) ** TMB Technical Manage-ment Board


* TC 221 Geosynthetics

20-22 Berlin (Germany) ** GA General Assembly

25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings

27 Düsseldorf (Germany)

* TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes

29 Virtual (Unknown)

TC 20/SC 17 Aircraft and space vehicles/Airport infrastructure

(China) ** JTC 1/SC 2 Information technol-ogy/Coded character sets

London (United Kingdom)

** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

(Australia) ** TC 27 Solid mineral fuels

(Australia) ** TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance

(Australia) ** TC 27/SC 3 Solid mineral fuels/Coke

(Australia) ** TC 27/SC 4 Solid mineral fuels/Sampling

(Australia) ** TC 27/SC 5 Solid mineral fuels/Methods of analysis

Erlangen (Germany)

** TC 36 Cinematography

Sapporo (Japan) ** TC 71 Concrete, reinforced concrete and pre-stressed concrete

Vienna (Austria) ** TC 165 Timber structures

(Nigeria) ** TC 260 Human resource management

(Malaysia) ** TC 267 Facilities management

3rd Quarter 2017

Beijing (China) ** TC 289 Brand evaluation

Vienna (Austria) ** TC 289 Brand evaluation

October 2017

2-7 Vladivostok (Russian Federation)

* JTC 1 Information technology

8 New Orleans (USA)

* TC 38 Textiles

9-10 Xian (China) * TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

9-13 New Delhi (India) ** TC 178 Lifts, escalators and moving walks

11 New Orleans (USA)

* TC 38/SC 1 Textiles/Tests for coloured textiles and colorants


* TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests


* TC 38/SC 23 Textiles/Fibres and yarns


* TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

22-27 Hawaii (USA) * TC 45 Rubber and rubber products

23-27 (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

Washington, D.C (USA)

** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

Milan (Italy) ** TC 86/SC 7 Refrigeration and air-conditioning/Test-ing and rating of com-mercial refrigerated display cabinets

November 2017

(India) ** TC 54 Essential oils

(Australia) ** TC 292 Security and resilience

4th Quarter 2017

(China) ** TC 34/SC 4 Food products/Cere-als and pulses

Month unknown 2017

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation


(USA) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

(South Africa) ** TC 46 Information and documentation

(South Africa) ** TC 46/SC 11 Information and doc-umentation/Archives/records management

(USA) ** TC 198 Sterilization of health care products

(China) ** TC 301 Energy management and energy savings

February 2018

12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

1st Quarter 2018

(Netherlands) ** JTC 1/SC 35 Information technol-ogy/User interfaces

April 2018

(USA) ** TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

Edinburgh (Unit-ed Kingdom)

** TC 147 Water quality

June 2018

Daegu (Korea, Republic of)

** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(Norway) ** TC 292 Security and resilience

September 2018

10-11 Toronto (Canada) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Japan) ** TC 61 Plastics

3rd Quarter 2018

(Japan) ** JTC 1/SC 35 Information technol-ogy/User interfaces

(Netherlands) ** TC 92 Fire safety

Sao Paulo (Brazil)

** TC 135 Non-destructive testing

October 2018

(Malaysia) ** TC 215 Health informatics

Month unknown 2018

(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Zhuhai (China) ** JTC 1/SC 28 Information technol-ogy/Office equipment

(China) ** TC 45 Rubber and rubber products

(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

(China) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Firefighters' personal equipment

Milan (Italy) ** TC 161 Controls and protec-tive devices for gas and/or oil

Buenos Aires (Argentina)

** TC 228 Tourism and related services

(Unknown) ** TC 276 Biotechnology

(Mexico) ** TC 301 Energy management and energy savings

June 2019

Beijing (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

Month unknown 2019

(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Month unknown 2020

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

iso update - international organization for standardization · pdf file ·...

Documents