isod-relnotes.pdf
DESCRIPTION
pTRANSCRIPT
ArbortextArbortextreg IsoDrawIsoDrawreg
ReleaseRelease NotesNotesArbortextArbortext IsoDrawIsoDraw FoundationFoundation 7272 F000F000
ArbortextArbortext IsoDrawIsoDraw CADprocessCADprocess 7272 F000F000AprilApril 20112011
CopyrightCopyright copycopy 20112011 ParametricParametric TechnologyTechnology CorporationCorporation andandoror ItsIts SubsidiarySubsidiary CompaniesCompanies AllAllRightsRights ReservedReserved
User and training guides and related documentation from Parametric Technology Corporation and itssubsidiary companies (collectively PTC) are subject to the copyright laws of the United States and othercountries and are provided under a license agreement that restricts copying disclosure and use of suchdocumentation PTC hereby grants to the licensed software user the right to make copies in printed form of thisdocumentation if provided on software media but only for internalpersonal use and in accordance with thelicense agreement under which the applicable software is licensed Any copy made shall include the PTCcopyright notice and any other proprietary notice provided by PTC Training materials may not be copiedwithout the express written consent of PTC This documentation may not be disclosed transferred modifiedor reduced to any form including electronic media or transmitted or made publicly available by any meanswithout the prior written consent of PTC and no authorization is granted to make copies for such purposes
Information described herein is furnished for general information only is subject to change without notice andshould not be construed as a warranty or commitment by PTC PTC assumes no responsibility or liability forany errors or inaccuracies that may appear in this document
The software described in this document is provided under written license agreement contains valuable tradesecrets and proprietary information and is protected by the copyright laws of the United States and othercountries It may not be copied or distributed in any form or medium disclosed to third parties or used in anymanner not provided for in the software licenses agreement except with written prior approval from PTC
UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVILDAMAGES AND CRIMINAL PROSECUTION PTC regards software piracy as the crime it is and we viewoffenders accordingly We do not tolerate the piracy of PTC software products and we pursue (both civilly andcriminally) those who do so using all legal means available including public and private surveillanceresources As part of these efforts PTC uses data monitoring and scouring technologies to obtain and transmitdata on users of illegal copies of our software This data collection is not performed on users of legally licensedsoftware from PTC and its authorized distributors If you are using an illegal copy of our software and do notconsent to the collection and transmission of such data (including to the United States) cease using the illegalversion and contact PTC to obtain a legally licensed copy
Important Copyright Trademark Patent and Licensing Information See the About Box or copyright noticeof your PTC software
UNITEDUNITED STATESSTATES GOVERNMENTGOVERNMENT RESTRICTEDRESTRICTED RIGHTSRIGHTS LEGENDLEGEND
This document and the software described herein are Commercial Computer Documentation and Softwarepursuant to FAR 12212(a)-(b) (OCTrsquo95) or DFARS 2277202-1(a) and 2277202-3(a) (JUNrsquo95) and areprovided to the US Government under a limited commercial license only For procurements predating theabove clauses use duplication or disclosure by the Government is subject to the restrictions set forth insubparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252227-7013 (OCTrsquo88) or Commercial Computer Software-Restricted Rights at FAR 52227-19(c)(1)-(2) (JUNrsquo87) asapplicable 01012011
Parametric Technology Corporation 140 Kendrick Street Needham MA 02494 USAParametric Technology Corporation 140 Kendrick Street Needham MA 02494 USA
ContentsContents
About This Guide5
Platform Support 11Supported Operating Systems and Web Browser 12System Requirements 12
Whatrsquos New 15New Arbortext IsoDraw 72 File Format163D Enhancements 16New Conditions in the Select Elements Dialog Box 19Improved Animation Editing 19Callout Enhancements 21Improved AutoCAD DWGDXF Import Interface23
SPRs 27
3
AboutAbout ThisThis GuideGuide
These Release Notes contain information about the 72 F000 release of these twoArbortext IsoDraw software products
bull Arbortext IsoDraw Foundation
bull Arbortext IsoDraw CADprocess
All information in this document applies to both products unless noted otherwise
Release 72 F000 has several new features and many upgraded functions relative toprevious releases such as enhanced 3D object alignment more powerful andflexible animation editing and the ability to create and edit links between calloutsand objects These new features are supported in the new Arbortext IsoDrawversion 72 ISO file format which is backward-compatible with olderArbortext IsoDraw formats (See Whatrsquos New on page 15 for details)
This release also includes separate optional software for integratingArbortext IsoDraw with other PTC applications such as Creo ElementsProreg 3Dproduct design software Creo ElementsViewreg 3D CAD visualization softwareand WindChillreg Product Data Management (PDM) software
Arbortext IsoDraw 72 F000 installs as a complete package that is separate fromolder versions of Arbortext IsoDraw you might have on your system
5
If you have Arbortext IsoDraw 71 (or older) installed on your system installingArbortext IsoDraw 72 F000 will not remove replace or otherwise affect it Afteryou install Arbortext IsoDraw 72 F000 you can still run the 71 (or older)software You can also run it concurrently with this new 72 F000 release
NoteNote
If you wish to remove older versions of Arbortext IsoDraw from your systemuninstall them manually (For more information see the installation and licensinginstructions in the Installing Arbortext IsoDraw guide for Arbortext IsoDraw 72)
Changes to documentation and the software itself may occur after the publicationof these release notes For documentation updates and descriptions of softwarefunctionality changes alternative techniques and common software issues reviewthe available solutions using the Update Advisor available in the SupportSupport area athttpwwwptccom
OrganizationOrganization ofof ThisThis GuideGuideThis document is intended for both administrators and users of Arbortext IsoDrawIt contains
bull Platform support information for Arbortext IsoDraw 72 F000 (See PlatformSupport on page 11)
bull Updates in this 72 F000 release (See Whatrsquos New on page 15)
bull Fixes and enhancements implemented in this 72 F000 release and in priorArbortext IsoDraw 71 and 70 releases (See SPRs on page 27)
RelatedRelated DocumentationDocumentationFor more information on Arbortext IsoDraw and Arbortext IsoView products referto the following documentation found in the Arbortext IsoDraw Help Center HelpCenter includes both HTML and PDF versions of the documentation Choose HelpHelp Help CenterHelp Centerto access it
For Arbortext IsoDraw information
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Release Notes (This guide) Information about newchanged and deleted features in thisArbortext IsoDraw release
Installing Arbortext IsoDraw Installation and licensing informationfor Arbortext IsoDraw
Drawing Basics Tutorial Hands-on examples for learningArbortext IsoDraw basic functions
3D Mode Tutorial Hands-on examples for learning 3DCAD data editing functions usingArbortext IsoDraw
6 Arbortextreg IsoDrawreg Release Notes
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Users Reference Comprehensive guide to using the toolsand functions in Arbortext IsoDrawproducts
Arbortext IsoDraw Macro LanguageReference
Reference for writing macros that youcan run in Arbortext IsoDraw
Arbortext IsoDraw Data ExchangeReference
Instructions for importing andexporting graphics data in variousformats to and from Arbortext IsoDraw
For Arbortext IsoView information
DocumentationDocumentation DescriptionDescription
Arbortext IsoView Release Notes Information about new changed anddeleted features in thisArbortext IsoView release
Arbortext IsoView Installation Guide Installation and licensing informationfor Arbortext IsoView
Arbortext IsoView Users Reference Instructions for using the tools andfunctions in Arbortext IsoView and forsetting preferences
Arbortext IsoView Programmers Refer-ence
Reference for writing API scripts thatcustomize and extend theArbortext IsoView ActiveX control
TechnicalTechnical SupportSupportContact PTC Technical Support via the PTC Web site phone fax or e-mail if youencounter problems using your product or the product documentation
For complete details refer to Contacting Technical Support in the PTC CustomerService Guide This guide can be found under the Related Resources section of thePTC Web site at
httpwwwptccomsupport
The PTC Web site also provides a search facility for technical documentation ofparticular interest To access this search facility use the URL above and selectSearch the Knowledge Base
You must have a Service Contract Number (SCN) before you can receive technicalsupport If you do not have an SCN contact PTC Maintenance Department usingthe instructions found in your PTC Customer Service Guide under ContactingYour Maintenance Support Representative
Technical Support 7
GlobalGlobal ServicesServicesPTC Global Services delivers the highest quality most efficient and mostcomprehensive deployments of the PTC Product Development System includingProENGINEER Windchill Arbortext and Mathcad PTCrsquos Implementation andExpansion solutions integrate the process consulting technology implementationeducation and value management activities customers need to be successfulCustomers are led through Solution Design Solution Development and SolutionDeployment phases with the continuous driving objective of maximizing valuefrom their investment
Contact your PTC sales representative for more information on Global Services
DocumentationDocumentation forfor PTCPTC ProductsProductsYou can access PTC product documentation using the following resources
bull Online Help
Click HelpHelp from the user interface for online help available for the product
bull Reference Documents
Individual product manuals are available from the Reference Documents linkof the PTC Web site at the following URL
httpwwwptccomsupport
bull Help Center
A searchable product documentation knowledge base is available from theHelp Center link of the PTC Web site at the following URL
httpwwwptccomsupport
You must have a Service Contract Number (SCN) before you can access theReference Documents or Help Center Web site If you do not have an SCN contactPTC Maintenance Department using the instructions found in your PTC CustomerService Guide under Contacting Your Maintenance Support Representative
DocumentationDocumentation ConventionsConventionsThis guide uses the following notational conventions
bull Bold textBold text represents exact text that appears in the programs user interface Thisincludes items such as button text menu selections and dialog box elementsFor example
Click OKOK to begin the operation
bull A right arrow represents successive menu selections For example
Choose FileFile PrintPrint to print the document
8 Arbortextreg IsoDrawreg Release Notes
bull Monospaced text represents code command names file paths or othertext that you would type exactly as described For example
At the command line type version to display version information
bull Italicized monospaced text represents variable text that you wouldtype For example
installation-dircustomscripts
bull Italicized text represents a reference to other published material For example
If you are new to the product refer to the Getting Started Guide for basicinterface information
CommentsCommentsPTC welcomes your suggestions and comments on our documentation You cansubmit your feedback to the following email address
arbortext-documentationptccom
Please include the following information in your email
bull Name
bull Company
bull Product
bull Product Version
bull Document or Online Help Topic Title
bull Level of Expertise in the Product (Beginning Intermediate Advanced)
bull Comments (including page numbers where applicable)
Comments 9
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
CopyrightCopyright copycopy 20112011 ParametricParametric TechnologyTechnology CorporationCorporation andandoror ItsIts SubsidiarySubsidiary CompaniesCompanies AllAllRightsRights ReservedReserved
User and training guides and related documentation from Parametric Technology Corporation and itssubsidiary companies (collectively PTC) are subject to the copyright laws of the United States and othercountries and are provided under a license agreement that restricts copying disclosure and use of suchdocumentation PTC hereby grants to the licensed software user the right to make copies in printed form of thisdocumentation if provided on software media but only for internalpersonal use and in accordance with thelicense agreement under which the applicable software is licensed Any copy made shall include the PTCcopyright notice and any other proprietary notice provided by PTC Training materials may not be copiedwithout the express written consent of PTC This documentation may not be disclosed transferred modifiedor reduced to any form including electronic media or transmitted or made publicly available by any meanswithout the prior written consent of PTC and no authorization is granted to make copies for such purposes
Information described herein is furnished for general information only is subject to change without notice andshould not be construed as a warranty or commitment by PTC PTC assumes no responsibility or liability forany errors or inaccuracies that may appear in this document
The software described in this document is provided under written license agreement contains valuable tradesecrets and proprietary information and is protected by the copyright laws of the United States and othercountries It may not be copied or distributed in any form or medium disclosed to third parties or used in anymanner not provided for in the software licenses agreement except with written prior approval from PTC
UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVILDAMAGES AND CRIMINAL PROSECUTION PTC regards software piracy as the crime it is and we viewoffenders accordingly We do not tolerate the piracy of PTC software products and we pursue (both civilly andcriminally) those who do so using all legal means available including public and private surveillanceresources As part of these efforts PTC uses data monitoring and scouring technologies to obtain and transmitdata on users of illegal copies of our software This data collection is not performed on users of legally licensedsoftware from PTC and its authorized distributors If you are using an illegal copy of our software and do notconsent to the collection and transmission of such data (including to the United States) cease using the illegalversion and contact PTC to obtain a legally licensed copy
Important Copyright Trademark Patent and Licensing Information See the About Box or copyright noticeof your PTC software
UNITEDUNITED STATESSTATES GOVERNMENTGOVERNMENT RESTRICTEDRESTRICTED RIGHTSRIGHTS LEGENDLEGEND
This document and the software described herein are Commercial Computer Documentation and Softwarepursuant to FAR 12212(a)-(b) (OCTrsquo95) or DFARS 2277202-1(a) and 2277202-3(a) (JUNrsquo95) and areprovided to the US Government under a limited commercial license only For procurements predating theabove clauses use duplication or disclosure by the Government is subject to the restrictions set forth insubparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252227-7013 (OCTrsquo88) or Commercial Computer Software-Restricted Rights at FAR 52227-19(c)(1)-(2) (JUNrsquo87) asapplicable 01012011
Parametric Technology Corporation 140 Kendrick Street Needham MA 02494 USAParametric Technology Corporation 140 Kendrick Street Needham MA 02494 USA
ContentsContents
About This Guide5
Platform Support 11Supported Operating Systems and Web Browser 12System Requirements 12
Whatrsquos New 15New Arbortext IsoDraw 72 File Format163D Enhancements 16New Conditions in the Select Elements Dialog Box 19Improved Animation Editing 19Callout Enhancements 21Improved AutoCAD DWGDXF Import Interface23
SPRs 27
3
AboutAbout ThisThis GuideGuide
These Release Notes contain information about the 72 F000 release of these twoArbortext IsoDraw software products
bull Arbortext IsoDraw Foundation
bull Arbortext IsoDraw CADprocess
All information in this document applies to both products unless noted otherwise
Release 72 F000 has several new features and many upgraded functions relative toprevious releases such as enhanced 3D object alignment more powerful andflexible animation editing and the ability to create and edit links between calloutsand objects These new features are supported in the new Arbortext IsoDrawversion 72 ISO file format which is backward-compatible with olderArbortext IsoDraw formats (See Whatrsquos New on page 15 for details)
This release also includes separate optional software for integratingArbortext IsoDraw with other PTC applications such as Creo ElementsProreg 3Dproduct design software Creo ElementsViewreg 3D CAD visualization softwareand WindChillreg Product Data Management (PDM) software
Arbortext IsoDraw 72 F000 installs as a complete package that is separate fromolder versions of Arbortext IsoDraw you might have on your system
5
If you have Arbortext IsoDraw 71 (or older) installed on your system installingArbortext IsoDraw 72 F000 will not remove replace or otherwise affect it Afteryou install Arbortext IsoDraw 72 F000 you can still run the 71 (or older)software You can also run it concurrently with this new 72 F000 release
NoteNote
If you wish to remove older versions of Arbortext IsoDraw from your systemuninstall them manually (For more information see the installation and licensinginstructions in the Installing Arbortext IsoDraw guide for Arbortext IsoDraw 72)
Changes to documentation and the software itself may occur after the publicationof these release notes For documentation updates and descriptions of softwarefunctionality changes alternative techniques and common software issues reviewthe available solutions using the Update Advisor available in the SupportSupport area athttpwwwptccom
OrganizationOrganization ofof ThisThis GuideGuideThis document is intended for both administrators and users of Arbortext IsoDrawIt contains
bull Platform support information for Arbortext IsoDraw 72 F000 (See PlatformSupport on page 11)
bull Updates in this 72 F000 release (See Whatrsquos New on page 15)
bull Fixes and enhancements implemented in this 72 F000 release and in priorArbortext IsoDraw 71 and 70 releases (See SPRs on page 27)
RelatedRelated DocumentationDocumentationFor more information on Arbortext IsoDraw and Arbortext IsoView products referto the following documentation found in the Arbortext IsoDraw Help Center HelpCenter includes both HTML and PDF versions of the documentation Choose HelpHelp Help CenterHelp Centerto access it
For Arbortext IsoDraw information
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Release Notes (This guide) Information about newchanged and deleted features in thisArbortext IsoDraw release
Installing Arbortext IsoDraw Installation and licensing informationfor Arbortext IsoDraw
Drawing Basics Tutorial Hands-on examples for learningArbortext IsoDraw basic functions
3D Mode Tutorial Hands-on examples for learning 3DCAD data editing functions usingArbortext IsoDraw
6 Arbortextreg IsoDrawreg Release Notes
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Users Reference Comprehensive guide to using the toolsand functions in Arbortext IsoDrawproducts
Arbortext IsoDraw Macro LanguageReference
Reference for writing macros that youcan run in Arbortext IsoDraw
Arbortext IsoDraw Data ExchangeReference
Instructions for importing andexporting graphics data in variousformats to and from Arbortext IsoDraw
For Arbortext IsoView information
DocumentationDocumentation DescriptionDescription
Arbortext IsoView Release Notes Information about new changed anddeleted features in thisArbortext IsoView release
Arbortext IsoView Installation Guide Installation and licensing informationfor Arbortext IsoView
Arbortext IsoView Users Reference Instructions for using the tools andfunctions in Arbortext IsoView and forsetting preferences
Arbortext IsoView Programmers Refer-ence
Reference for writing API scripts thatcustomize and extend theArbortext IsoView ActiveX control
TechnicalTechnical SupportSupportContact PTC Technical Support via the PTC Web site phone fax or e-mail if youencounter problems using your product or the product documentation
For complete details refer to Contacting Technical Support in the PTC CustomerService Guide This guide can be found under the Related Resources section of thePTC Web site at
httpwwwptccomsupport
The PTC Web site also provides a search facility for technical documentation ofparticular interest To access this search facility use the URL above and selectSearch the Knowledge Base
You must have a Service Contract Number (SCN) before you can receive technicalsupport If you do not have an SCN contact PTC Maintenance Department usingthe instructions found in your PTC Customer Service Guide under ContactingYour Maintenance Support Representative
Technical Support 7
GlobalGlobal ServicesServicesPTC Global Services delivers the highest quality most efficient and mostcomprehensive deployments of the PTC Product Development System includingProENGINEER Windchill Arbortext and Mathcad PTCrsquos Implementation andExpansion solutions integrate the process consulting technology implementationeducation and value management activities customers need to be successfulCustomers are led through Solution Design Solution Development and SolutionDeployment phases with the continuous driving objective of maximizing valuefrom their investment
Contact your PTC sales representative for more information on Global Services
DocumentationDocumentation forfor PTCPTC ProductsProductsYou can access PTC product documentation using the following resources
bull Online Help
Click HelpHelp from the user interface for online help available for the product
bull Reference Documents
Individual product manuals are available from the Reference Documents linkof the PTC Web site at the following URL
httpwwwptccomsupport
bull Help Center
A searchable product documentation knowledge base is available from theHelp Center link of the PTC Web site at the following URL
httpwwwptccomsupport
You must have a Service Contract Number (SCN) before you can access theReference Documents or Help Center Web site If you do not have an SCN contactPTC Maintenance Department using the instructions found in your PTC CustomerService Guide under Contacting Your Maintenance Support Representative
DocumentationDocumentation ConventionsConventionsThis guide uses the following notational conventions
bull Bold textBold text represents exact text that appears in the programs user interface Thisincludes items such as button text menu selections and dialog box elementsFor example
Click OKOK to begin the operation
bull A right arrow represents successive menu selections For example
Choose FileFile PrintPrint to print the document
8 Arbortextreg IsoDrawreg Release Notes
bull Monospaced text represents code command names file paths or othertext that you would type exactly as described For example
At the command line type version to display version information
bull Italicized monospaced text represents variable text that you wouldtype For example
installation-dircustomscripts
bull Italicized text represents a reference to other published material For example
If you are new to the product refer to the Getting Started Guide for basicinterface information
CommentsCommentsPTC welcomes your suggestions and comments on our documentation You cansubmit your feedback to the following email address
arbortext-documentationptccom
Please include the following information in your email
bull Name
bull Company
bull Product
bull Product Version
bull Document or Online Help Topic Title
bull Level of Expertise in the Product (Beginning Intermediate Advanced)
bull Comments (including page numbers where applicable)
Comments 9
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
ContentsContents
About This Guide5
Platform Support 11Supported Operating Systems and Web Browser 12System Requirements 12
Whatrsquos New 15New Arbortext IsoDraw 72 File Format163D Enhancements 16New Conditions in the Select Elements Dialog Box 19Improved Animation Editing 19Callout Enhancements 21Improved AutoCAD DWGDXF Import Interface23
SPRs 27
3
AboutAbout ThisThis GuideGuide
These Release Notes contain information about the 72 F000 release of these twoArbortext IsoDraw software products
bull Arbortext IsoDraw Foundation
bull Arbortext IsoDraw CADprocess
All information in this document applies to both products unless noted otherwise
Release 72 F000 has several new features and many upgraded functions relative toprevious releases such as enhanced 3D object alignment more powerful andflexible animation editing and the ability to create and edit links between calloutsand objects These new features are supported in the new Arbortext IsoDrawversion 72 ISO file format which is backward-compatible with olderArbortext IsoDraw formats (See Whatrsquos New on page 15 for details)
This release also includes separate optional software for integratingArbortext IsoDraw with other PTC applications such as Creo ElementsProreg 3Dproduct design software Creo ElementsViewreg 3D CAD visualization softwareand WindChillreg Product Data Management (PDM) software
Arbortext IsoDraw 72 F000 installs as a complete package that is separate fromolder versions of Arbortext IsoDraw you might have on your system
5
If you have Arbortext IsoDraw 71 (or older) installed on your system installingArbortext IsoDraw 72 F000 will not remove replace or otherwise affect it Afteryou install Arbortext IsoDraw 72 F000 you can still run the 71 (or older)software You can also run it concurrently with this new 72 F000 release
NoteNote
If you wish to remove older versions of Arbortext IsoDraw from your systemuninstall them manually (For more information see the installation and licensinginstructions in the Installing Arbortext IsoDraw guide for Arbortext IsoDraw 72)
Changes to documentation and the software itself may occur after the publicationof these release notes For documentation updates and descriptions of softwarefunctionality changes alternative techniques and common software issues reviewthe available solutions using the Update Advisor available in the SupportSupport area athttpwwwptccom
OrganizationOrganization ofof ThisThis GuideGuideThis document is intended for both administrators and users of Arbortext IsoDrawIt contains
bull Platform support information for Arbortext IsoDraw 72 F000 (See PlatformSupport on page 11)
bull Updates in this 72 F000 release (See Whatrsquos New on page 15)
bull Fixes and enhancements implemented in this 72 F000 release and in priorArbortext IsoDraw 71 and 70 releases (See SPRs on page 27)
RelatedRelated DocumentationDocumentationFor more information on Arbortext IsoDraw and Arbortext IsoView products referto the following documentation found in the Arbortext IsoDraw Help Center HelpCenter includes both HTML and PDF versions of the documentation Choose HelpHelp Help CenterHelp Centerto access it
For Arbortext IsoDraw information
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Release Notes (This guide) Information about newchanged and deleted features in thisArbortext IsoDraw release
Installing Arbortext IsoDraw Installation and licensing informationfor Arbortext IsoDraw
Drawing Basics Tutorial Hands-on examples for learningArbortext IsoDraw basic functions
3D Mode Tutorial Hands-on examples for learning 3DCAD data editing functions usingArbortext IsoDraw
6 Arbortextreg IsoDrawreg Release Notes
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Users Reference Comprehensive guide to using the toolsand functions in Arbortext IsoDrawproducts
Arbortext IsoDraw Macro LanguageReference
Reference for writing macros that youcan run in Arbortext IsoDraw
Arbortext IsoDraw Data ExchangeReference
Instructions for importing andexporting graphics data in variousformats to and from Arbortext IsoDraw
For Arbortext IsoView information
DocumentationDocumentation DescriptionDescription
Arbortext IsoView Release Notes Information about new changed anddeleted features in thisArbortext IsoView release
Arbortext IsoView Installation Guide Installation and licensing informationfor Arbortext IsoView
Arbortext IsoView Users Reference Instructions for using the tools andfunctions in Arbortext IsoView and forsetting preferences
Arbortext IsoView Programmers Refer-ence
Reference for writing API scripts thatcustomize and extend theArbortext IsoView ActiveX control
TechnicalTechnical SupportSupportContact PTC Technical Support via the PTC Web site phone fax or e-mail if youencounter problems using your product or the product documentation
For complete details refer to Contacting Technical Support in the PTC CustomerService Guide This guide can be found under the Related Resources section of thePTC Web site at
httpwwwptccomsupport
The PTC Web site also provides a search facility for technical documentation ofparticular interest To access this search facility use the URL above and selectSearch the Knowledge Base
You must have a Service Contract Number (SCN) before you can receive technicalsupport If you do not have an SCN contact PTC Maintenance Department usingthe instructions found in your PTC Customer Service Guide under ContactingYour Maintenance Support Representative
Technical Support 7
GlobalGlobal ServicesServicesPTC Global Services delivers the highest quality most efficient and mostcomprehensive deployments of the PTC Product Development System includingProENGINEER Windchill Arbortext and Mathcad PTCrsquos Implementation andExpansion solutions integrate the process consulting technology implementationeducation and value management activities customers need to be successfulCustomers are led through Solution Design Solution Development and SolutionDeployment phases with the continuous driving objective of maximizing valuefrom their investment
Contact your PTC sales representative for more information on Global Services
DocumentationDocumentation forfor PTCPTC ProductsProductsYou can access PTC product documentation using the following resources
bull Online Help
Click HelpHelp from the user interface for online help available for the product
bull Reference Documents
Individual product manuals are available from the Reference Documents linkof the PTC Web site at the following URL
httpwwwptccomsupport
bull Help Center
A searchable product documentation knowledge base is available from theHelp Center link of the PTC Web site at the following URL
httpwwwptccomsupport
You must have a Service Contract Number (SCN) before you can access theReference Documents or Help Center Web site If you do not have an SCN contactPTC Maintenance Department using the instructions found in your PTC CustomerService Guide under Contacting Your Maintenance Support Representative
DocumentationDocumentation ConventionsConventionsThis guide uses the following notational conventions
bull Bold textBold text represents exact text that appears in the programs user interface Thisincludes items such as button text menu selections and dialog box elementsFor example
Click OKOK to begin the operation
bull A right arrow represents successive menu selections For example
Choose FileFile PrintPrint to print the document
8 Arbortextreg IsoDrawreg Release Notes
bull Monospaced text represents code command names file paths or othertext that you would type exactly as described For example
At the command line type version to display version information
bull Italicized monospaced text represents variable text that you wouldtype For example
installation-dircustomscripts
bull Italicized text represents a reference to other published material For example
If you are new to the product refer to the Getting Started Guide for basicinterface information
CommentsCommentsPTC welcomes your suggestions and comments on our documentation You cansubmit your feedback to the following email address
arbortext-documentationptccom
Please include the following information in your email
bull Name
bull Company
bull Product
bull Product Version
bull Document or Online Help Topic Title
bull Level of Expertise in the Product (Beginning Intermediate Advanced)
bull Comments (including page numbers where applicable)
Comments 9
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
AboutAbout ThisThis GuideGuide
These Release Notes contain information about the 72 F000 release of these twoArbortext IsoDraw software products
bull Arbortext IsoDraw Foundation
bull Arbortext IsoDraw CADprocess
All information in this document applies to both products unless noted otherwise
Release 72 F000 has several new features and many upgraded functions relative toprevious releases such as enhanced 3D object alignment more powerful andflexible animation editing and the ability to create and edit links between calloutsand objects These new features are supported in the new Arbortext IsoDrawversion 72 ISO file format which is backward-compatible with olderArbortext IsoDraw formats (See Whatrsquos New on page 15 for details)
This release also includes separate optional software for integratingArbortext IsoDraw with other PTC applications such as Creo ElementsProreg 3Dproduct design software Creo ElementsViewreg 3D CAD visualization softwareand WindChillreg Product Data Management (PDM) software
Arbortext IsoDraw 72 F000 installs as a complete package that is separate fromolder versions of Arbortext IsoDraw you might have on your system
5
If you have Arbortext IsoDraw 71 (or older) installed on your system installingArbortext IsoDraw 72 F000 will not remove replace or otherwise affect it Afteryou install Arbortext IsoDraw 72 F000 you can still run the 71 (or older)software You can also run it concurrently with this new 72 F000 release
NoteNote
If you wish to remove older versions of Arbortext IsoDraw from your systemuninstall them manually (For more information see the installation and licensinginstructions in the Installing Arbortext IsoDraw guide for Arbortext IsoDraw 72)
Changes to documentation and the software itself may occur after the publicationof these release notes For documentation updates and descriptions of softwarefunctionality changes alternative techniques and common software issues reviewthe available solutions using the Update Advisor available in the SupportSupport area athttpwwwptccom
OrganizationOrganization ofof ThisThis GuideGuideThis document is intended for both administrators and users of Arbortext IsoDrawIt contains
bull Platform support information for Arbortext IsoDraw 72 F000 (See PlatformSupport on page 11)
bull Updates in this 72 F000 release (See Whatrsquos New on page 15)
bull Fixes and enhancements implemented in this 72 F000 release and in priorArbortext IsoDraw 71 and 70 releases (See SPRs on page 27)
RelatedRelated DocumentationDocumentationFor more information on Arbortext IsoDraw and Arbortext IsoView products referto the following documentation found in the Arbortext IsoDraw Help Center HelpCenter includes both HTML and PDF versions of the documentation Choose HelpHelp Help CenterHelp Centerto access it
For Arbortext IsoDraw information
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Release Notes (This guide) Information about newchanged and deleted features in thisArbortext IsoDraw release
Installing Arbortext IsoDraw Installation and licensing informationfor Arbortext IsoDraw
Drawing Basics Tutorial Hands-on examples for learningArbortext IsoDraw basic functions
3D Mode Tutorial Hands-on examples for learning 3DCAD data editing functions usingArbortext IsoDraw
6 Arbortextreg IsoDrawreg Release Notes
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Users Reference Comprehensive guide to using the toolsand functions in Arbortext IsoDrawproducts
Arbortext IsoDraw Macro LanguageReference
Reference for writing macros that youcan run in Arbortext IsoDraw
Arbortext IsoDraw Data ExchangeReference
Instructions for importing andexporting graphics data in variousformats to and from Arbortext IsoDraw
For Arbortext IsoView information
DocumentationDocumentation DescriptionDescription
Arbortext IsoView Release Notes Information about new changed anddeleted features in thisArbortext IsoView release
Arbortext IsoView Installation Guide Installation and licensing informationfor Arbortext IsoView
Arbortext IsoView Users Reference Instructions for using the tools andfunctions in Arbortext IsoView and forsetting preferences
Arbortext IsoView Programmers Refer-ence
Reference for writing API scripts thatcustomize and extend theArbortext IsoView ActiveX control
TechnicalTechnical SupportSupportContact PTC Technical Support via the PTC Web site phone fax or e-mail if youencounter problems using your product or the product documentation
For complete details refer to Contacting Technical Support in the PTC CustomerService Guide This guide can be found under the Related Resources section of thePTC Web site at
httpwwwptccomsupport
The PTC Web site also provides a search facility for technical documentation ofparticular interest To access this search facility use the URL above and selectSearch the Knowledge Base
You must have a Service Contract Number (SCN) before you can receive technicalsupport If you do not have an SCN contact PTC Maintenance Department usingthe instructions found in your PTC Customer Service Guide under ContactingYour Maintenance Support Representative
Technical Support 7
GlobalGlobal ServicesServicesPTC Global Services delivers the highest quality most efficient and mostcomprehensive deployments of the PTC Product Development System includingProENGINEER Windchill Arbortext and Mathcad PTCrsquos Implementation andExpansion solutions integrate the process consulting technology implementationeducation and value management activities customers need to be successfulCustomers are led through Solution Design Solution Development and SolutionDeployment phases with the continuous driving objective of maximizing valuefrom their investment
Contact your PTC sales representative for more information on Global Services
DocumentationDocumentation forfor PTCPTC ProductsProductsYou can access PTC product documentation using the following resources
bull Online Help
Click HelpHelp from the user interface for online help available for the product
bull Reference Documents
Individual product manuals are available from the Reference Documents linkof the PTC Web site at the following URL
httpwwwptccomsupport
bull Help Center
A searchable product documentation knowledge base is available from theHelp Center link of the PTC Web site at the following URL
httpwwwptccomsupport
You must have a Service Contract Number (SCN) before you can access theReference Documents or Help Center Web site If you do not have an SCN contactPTC Maintenance Department using the instructions found in your PTC CustomerService Guide under Contacting Your Maintenance Support Representative
DocumentationDocumentation ConventionsConventionsThis guide uses the following notational conventions
bull Bold textBold text represents exact text that appears in the programs user interface Thisincludes items such as button text menu selections and dialog box elementsFor example
Click OKOK to begin the operation
bull A right arrow represents successive menu selections For example
Choose FileFile PrintPrint to print the document
8 Arbortextreg IsoDrawreg Release Notes
bull Monospaced text represents code command names file paths or othertext that you would type exactly as described For example
At the command line type version to display version information
bull Italicized monospaced text represents variable text that you wouldtype For example
installation-dircustomscripts
bull Italicized text represents a reference to other published material For example
If you are new to the product refer to the Getting Started Guide for basicinterface information
CommentsCommentsPTC welcomes your suggestions and comments on our documentation You cansubmit your feedback to the following email address
arbortext-documentationptccom
Please include the following information in your email
bull Name
bull Company
bull Product
bull Product Version
bull Document or Online Help Topic Title
bull Level of Expertise in the Product (Beginning Intermediate Advanced)
bull Comments (including page numbers where applicable)
Comments 9
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
If you have Arbortext IsoDraw 71 (or older) installed on your system installingArbortext IsoDraw 72 F000 will not remove replace or otherwise affect it Afteryou install Arbortext IsoDraw 72 F000 you can still run the 71 (or older)software You can also run it concurrently with this new 72 F000 release
NoteNote
If you wish to remove older versions of Arbortext IsoDraw from your systemuninstall them manually (For more information see the installation and licensinginstructions in the Installing Arbortext IsoDraw guide for Arbortext IsoDraw 72)
Changes to documentation and the software itself may occur after the publicationof these release notes For documentation updates and descriptions of softwarefunctionality changes alternative techniques and common software issues reviewthe available solutions using the Update Advisor available in the SupportSupport area athttpwwwptccom
OrganizationOrganization ofof ThisThis GuideGuideThis document is intended for both administrators and users of Arbortext IsoDrawIt contains
bull Platform support information for Arbortext IsoDraw 72 F000 (See PlatformSupport on page 11)
bull Updates in this 72 F000 release (See Whatrsquos New on page 15)
bull Fixes and enhancements implemented in this 72 F000 release and in priorArbortext IsoDraw 71 and 70 releases (See SPRs on page 27)
RelatedRelated DocumentationDocumentationFor more information on Arbortext IsoDraw and Arbortext IsoView products referto the following documentation found in the Arbortext IsoDraw Help Center HelpCenter includes both HTML and PDF versions of the documentation Choose HelpHelp Help CenterHelp Centerto access it
For Arbortext IsoDraw information
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Release Notes (This guide) Information about newchanged and deleted features in thisArbortext IsoDraw release
Installing Arbortext IsoDraw Installation and licensing informationfor Arbortext IsoDraw
Drawing Basics Tutorial Hands-on examples for learningArbortext IsoDraw basic functions
3D Mode Tutorial Hands-on examples for learning 3DCAD data editing functions usingArbortext IsoDraw
6 Arbortextreg IsoDrawreg Release Notes
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Users Reference Comprehensive guide to using the toolsand functions in Arbortext IsoDrawproducts
Arbortext IsoDraw Macro LanguageReference
Reference for writing macros that youcan run in Arbortext IsoDraw
Arbortext IsoDraw Data ExchangeReference
Instructions for importing andexporting graphics data in variousformats to and from Arbortext IsoDraw
For Arbortext IsoView information
DocumentationDocumentation DescriptionDescription
Arbortext IsoView Release Notes Information about new changed anddeleted features in thisArbortext IsoView release
Arbortext IsoView Installation Guide Installation and licensing informationfor Arbortext IsoView
Arbortext IsoView Users Reference Instructions for using the tools andfunctions in Arbortext IsoView and forsetting preferences
Arbortext IsoView Programmers Refer-ence
Reference for writing API scripts thatcustomize and extend theArbortext IsoView ActiveX control
TechnicalTechnical SupportSupportContact PTC Technical Support via the PTC Web site phone fax or e-mail if youencounter problems using your product or the product documentation
For complete details refer to Contacting Technical Support in the PTC CustomerService Guide This guide can be found under the Related Resources section of thePTC Web site at
httpwwwptccomsupport
The PTC Web site also provides a search facility for technical documentation ofparticular interest To access this search facility use the URL above and selectSearch the Knowledge Base
You must have a Service Contract Number (SCN) before you can receive technicalsupport If you do not have an SCN contact PTC Maintenance Department usingthe instructions found in your PTC Customer Service Guide under ContactingYour Maintenance Support Representative
Technical Support 7
GlobalGlobal ServicesServicesPTC Global Services delivers the highest quality most efficient and mostcomprehensive deployments of the PTC Product Development System includingProENGINEER Windchill Arbortext and Mathcad PTCrsquos Implementation andExpansion solutions integrate the process consulting technology implementationeducation and value management activities customers need to be successfulCustomers are led through Solution Design Solution Development and SolutionDeployment phases with the continuous driving objective of maximizing valuefrom their investment
Contact your PTC sales representative for more information on Global Services
DocumentationDocumentation forfor PTCPTC ProductsProductsYou can access PTC product documentation using the following resources
bull Online Help
Click HelpHelp from the user interface for online help available for the product
bull Reference Documents
Individual product manuals are available from the Reference Documents linkof the PTC Web site at the following URL
httpwwwptccomsupport
bull Help Center
A searchable product documentation knowledge base is available from theHelp Center link of the PTC Web site at the following URL
httpwwwptccomsupport
You must have a Service Contract Number (SCN) before you can access theReference Documents or Help Center Web site If you do not have an SCN contactPTC Maintenance Department using the instructions found in your PTC CustomerService Guide under Contacting Your Maintenance Support Representative
DocumentationDocumentation ConventionsConventionsThis guide uses the following notational conventions
bull Bold textBold text represents exact text that appears in the programs user interface Thisincludes items such as button text menu selections and dialog box elementsFor example
Click OKOK to begin the operation
bull A right arrow represents successive menu selections For example
Choose FileFile PrintPrint to print the document
8 Arbortextreg IsoDrawreg Release Notes
bull Monospaced text represents code command names file paths or othertext that you would type exactly as described For example
At the command line type version to display version information
bull Italicized monospaced text represents variable text that you wouldtype For example
installation-dircustomscripts
bull Italicized text represents a reference to other published material For example
If you are new to the product refer to the Getting Started Guide for basicinterface information
CommentsCommentsPTC welcomes your suggestions and comments on our documentation You cansubmit your feedback to the following email address
arbortext-documentationptccom
Please include the following information in your email
bull Name
bull Company
bull Product
bull Product Version
bull Document or Online Help Topic Title
bull Level of Expertise in the Product (Beginning Intermediate Advanced)
bull Comments (including page numbers where applicable)
Comments 9
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
DocumentationDocumentation DescriptionDescription
Arbortext IsoDraw Users Reference Comprehensive guide to using the toolsand functions in Arbortext IsoDrawproducts
Arbortext IsoDraw Macro LanguageReference
Reference for writing macros that youcan run in Arbortext IsoDraw
Arbortext IsoDraw Data ExchangeReference
Instructions for importing andexporting graphics data in variousformats to and from Arbortext IsoDraw
For Arbortext IsoView information
DocumentationDocumentation DescriptionDescription
Arbortext IsoView Release Notes Information about new changed anddeleted features in thisArbortext IsoView release
Arbortext IsoView Installation Guide Installation and licensing informationfor Arbortext IsoView
Arbortext IsoView Users Reference Instructions for using the tools andfunctions in Arbortext IsoView and forsetting preferences
Arbortext IsoView Programmers Refer-ence
Reference for writing API scripts thatcustomize and extend theArbortext IsoView ActiveX control
TechnicalTechnical SupportSupportContact PTC Technical Support via the PTC Web site phone fax or e-mail if youencounter problems using your product or the product documentation
For complete details refer to Contacting Technical Support in the PTC CustomerService Guide This guide can be found under the Related Resources section of thePTC Web site at
httpwwwptccomsupport
The PTC Web site also provides a search facility for technical documentation ofparticular interest To access this search facility use the URL above and selectSearch the Knowledge Base
You must have a Service Contract Number (SCN) before you can receive technicalsupport If you do not have an SCN contact PTC Maintenance Department usingthe instructions found in your PTC Customer Service Guide under ContactingYour Maintenance Support Representative
Technical Support 7
GlobalGlobal ServicesServicesPTC Global Services delivers the highest quality most efficient and mostcomprehensive deployments of the PTC Product Development System includingProENGINEER Windchill Arbortext and Mathcad PTCrsquos Implementation andExpansion solutions integrate the process consulting technology implementationeducation and value management activities customers need to be successfulCustomers are led through Solution Design Solution Development and SolutionDeployment phases with the continuous driving objective of maximizing valuefrom their investment
Contact your PTC sales representative for more information on Global Services
DocumentationDocumentation forfor PTCPTC ProductsProductsYou can access PTC product documentation using the following resources
bull Online Help
Click HelpHelp from the user interface for online help available for the product
bull Reference Documents
Individual product manuals are available from the Reference Documents linkof the PTC Web site at the following URL
httpwwwptccomsupport
bull Help Center
A searchable product documentation knowledge base is available from theHelp Center link of the PTC Web site at the following URL
httpwwwptccomsupport
You must have a Service Contract Number (SCN) before you can access theReference Documents or Help Center Web site If you do not have an SCN contactPTC Maintenance Department using the instructions found in your PTC CustomerService Guide under Contacting Your Maintenance Support Representative
DocumentationDocumentation ConventionsConventionsThis guide uses the following notational conventions
bull Bold textBold text represents exact text that appears in the programs user interface Thisincludes items such as button text menu selections and dialog box elementsFor example
Click OKOK to begin the operation
bull A right arrow represents successive menu selections For example
Choose FileFile PrintPrint to print the document
8 Arbortextreg IsoDrawreg Release Notes
bull Monospaced text represents code command names file paths or othertext that you would type exactly as described For example
At the command line type version to display version information
bull Italicized monospaced text represents variable text that you wouldtype For example
installation-dircustomscripts
bull Italicized text represents a reference to other published material For example
If you are new to the product refer to the Getting Started Guide for basicinterface information
CommentsCommentsPTC welcomes your suggestions and comments on our documentation You cansubmit your feedback to the following email address
arbortext-documentationptccom
Please include the following information in your email
bull Name
bull Company
bull Product
bull Product Version
bull Document or Online Help Topic Title
bull Level of Expertise in the Product (Beginning Intermediate Advanced)
bull Comments (including page numbers where applicable)
Comments 9
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
GlobalGlobal ServicesServicesPTC Global Services delivers the highest quality most efficient and mostcomprehensive deployments of the PTC Product Development System includingProENGINEER Windchill Arbortext and Mathcad PTCrsquos Implementation andExpansion solutions integrate the process consulting technology implementationeducation and value management activities customers need to be successfulCustomers are led through Solution Design Solution Development and SolutionDeployment phases with the continuous driving objective of maximizing valuefrom their investment
Contact your PTC sales representative for more information on Global Services
DocumentationDocumentation forfor PTCPTC ProductsProductsYou can access PTC product documentation using the following resources
bull Online Help
Click HelpHelp from the user interface for online help available for the product
bull Reference Documents
Individual product manuals are available from the Reference Documents linkof the PTC Web site at the following URL
httpwwwptccomsupport
bull Help Center
A searchable product documentation knowledge base is available from theHelp Center link of the PTC Web site at the following URL
httpwwwptccomsupport
You must have a Service Contract Number (SCN) before you can access theReference Documents or Help Center Web site If you do not have an SCN contactPTC Maintenance Department using the instructions found in your PTC CustomerService Guide under Contacting Your Maintenance Support Representative
DocumentationDocumentation ConventionsConventionsThis guide uses the following notational conventions
bull Bold textBold text represents exact text that appears in the programs user interface Thisincludes items such as button text menu selections and dialog box elementsFor example
Click OKOK to begin the operation
bull A right arrow represents successive menu selections For example
Choose FileFile PrintPrint to print the document
8 Arbortextreg IsoDrawreg Release Notes
bull Monospaced text represents code command names file paths or othertext that you would type exactly as described For example
At the command line type version to display version information
bull Italicized monospaced text represents variable text that you wouldtype For example
installation-dircustomscripts
bull Italicized text represents a reference to other published material For example
If you are new to the product refer to the Getting Started Guide for basicinterface information
CommentsCommentsPTC welcomes your suggestions and comments on our documentation You cansubmit your feedback to the following email address
arbortext-documentationptccom
Please include the following information in your email
bull Name
bull Company
bull Product
bull Product Version
bull Document or Online Help Topic Title
bull Level of Expertise in the Product (Beginning Intermediate Advanced)
bull Comments (including page numbers where applicable)
Comments 9
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
bull Monospaced text represents code command names file paths or othertext that you would type exactly as described For example
At the command line type version to display version information
bull Italicized monospaced text represents variable text that you wouldtype For example
installation-dircustomscripts
bull Italicized text represents a reference to other published material For example
If you are new to the product refer to the Getting Started Guide for basicinterface information
CommentsCommentsPTC welcomes your suggestions and comments on our documentation You cansubmit your feedback to the following email address
arbortext-documentationptccom
Please include the following information in your email
bull Name
bull Company
bull Product
bull Product Version
bull Document or Online Help Topic Title
bull Level of Expertise in the Product (Beginning Intermediate Advanced)
bull Comments (including page numbers where applicable)
Comments 9
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
11PlatformPlatform SupportSupport
Supported Operating Systems and Web Browser 12System Requirements12
This section identifies the platforms and system requirements forArbortext IsoDraw 72 F000
11
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
SupportedSupported OperatingOperating SystemsSystems andand WebWebBrowserBrowserWindows XP (32-bit) with Service Pack 3 or above
Windows Vista (32-bit) with Service Pack 2 or above
Windows 7 (32-bit)
Windows 7 (64-bit)
Microsoft Internet Explorer 70 or later (32-bit only) with ActiveX enabled
SystemSystem RequirementsRequirements
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitPC processor
l1 GHz x86 ge 2 GHz x86
RAM 1 GB ge 1 GBPC processor
l1 GHz x64 ge 3 GHz x64
RAM 1 GB ge 4 GB
Graphics card l l
OpenGL support16-bit colorpalette 800 times 600screen resolution
OpenGL support32-bit colorpalette1280 times 1024screen resolution
Free space on harddisk for CompleteComplete
installationl l
650 MB
Includesapplicationprogram files Javaruntimeenvironmentdocumentationlibrary filestutorial filesexample files andall optionalfeatures
650 MB
Free space on harddisk for CustomCustom
installationl l
400 MB
Minimum CustomCustom
installationincludesapplication
650 MB
CustomCustom installationwith all optionalfeatures installedrequires same
12 Arbortextreg IsoDrawreg Release Notes
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
RequirementRequirementPlatformPlatform
MinimumMinimum RecommendedRecommended32 bit32 bit 64 bit64 bitprogram files andJava runtimeenvironment only
amount of diskspace as CompleteComplete
installation
Keyboard l l With function keys SameMouse l l 2-button Same
Printer l l
When using aPostScript printerthe printer drivershould supportPostScript forfaster printing
Same
Platform Support 13
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
22WhatrsquosWhatrsquos NewNew
New Arbortext IsoDraw 72 File Format 163D Enhancements 16New Conditions in the Select Elements Dialog Box19Improved Animation Editing19Callout Enhancements21Improved AutoCAD DWGDXF Import Interface 23
This chapter summarizes major the additions and changes to Arbortext IsoDraw inthis 72 F000 release
15
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
NewNew ArbortextArbortext IsoDrawIsoDraw 7272 FileFile FormatFormatThe ISO file format was updated to support the following enhancements inArbortext IsoDraw 72 F000
bull Multiple saved free 3D axes
bull New Numeric ATANumeric ATA callout scheme
bull Callout starting number
bull ObjectCallout connection
bull Animation groups
These new features (and others) are detailed in this section
Older versions of Arbortext IsoDraw will not be able to read files saved in ISO 72format However you can save illustrations in the earlier ISO version 71 70 or 6file formats in Arbortext IsoDraw 72 F000
NoteNote
If you save a version 72 ISO file in an earlier ISO format or in CGM or SVGformat you will lose any information that is not supported in that format such asthe 72 enhancements listed above
3D3D EnhancementsEnhancementsDisplayDisplay 3D3D SetSet BoundingBounding BoxesBoxes inin 2D2D ModeMode
Arbortext IsoDraw 72 F000 optionally displays a bounding box around each 3Dset in 2D mode if PreviewPreview is off This makes it easier to see which 3D object is inwhich 3D set in 2D mode
bull To see the bounding box for a 3D set in 2D mode select Keep 3D dataKeep 3D data in the3D Projection - Set3D Projection - Set dialog box when you convert the 3D set to 2D
bull To show or hide all 3D set bounding boxes in 2D (non-Preview) mode use theShow bounding boxShow bounding box check box under 3D sets3D sets on the 3D Options3D Options preferencespage
FillFill 3D3D SetSet ContourContour withwith ColorColor inin HLRHLR IllustrationsIllustrations
In release 72 F000 if you project a 3D set into 2D with remove hidden linesremove hidden lines
selected you can fill the contour of that 3D set with a color in the 2D HLR (hiddenlines removed) illustration This contour fill effect makes it easy to highlight partsand assemblies in HLR illustrations
16 Arbortextreg IsoDrawreg Release Notes
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
To add a color-filled contour to the 3D set you are projecting In the 3D Projection -3D Projection -SetSet dialog box select remove hidden linesremove hidden lines and the fill contourfill contour check box If youwant to change the contour fill color click OptionsOptions and pick a new color under FillFillcontourcontour withwith colorcolor
The contour is a closed color-filled Beacutezier path around the outer contour of the 3Dset To see the filled contour path in 2D mode turn on PreviewPreview
The 3D set contour path is filled with a single color (white by default) and itsoutline is invisible (The outline PenPen attribute is set to No penNo pen) In 2D mode thecontour path is grouped with the 3D set
NoteNote
Ungrouping a placed 3D set breaks the link to its source 3D data
For more information see the ldquoFill Contourrdquo section in 3D Projection
SetSet aa DefaultDefault ContourContour FillFill ColorColor forfor EachEach 3D3D SetSet
Before release 72 F000 preference setting defaults could only be applied at theApplication or Document level In release 72 F000 the 3D set contour fill colordefault preference can be set at the new individual (3D) ldquoSetrdquo level (hellipor theApplication or Document level)
bull Application-level default preferences apply to all documents you open afterthey are set
bull Document-level default preferences only apply to one document (illustrationfile)
bull A Set-level default contour fill color preference only applies to one 3D setThis means you can have several different 3D sets with different defaultcontour fill colors in one illustration file You do not have to specify thecontour fill color each time you project a 3D set
NoteNote
The ability to save Set-level contour fill color preferences is only available inISO files saved in the 72 (or later) file format It is not supported in ISO 71 orearlier CGM or SVG file format
A default Set-level contour fill color can only be set in 3D mode when the 3D setis active To make this setting (hellipin 3D mode with the 3D set active) access the 3D3DProjectionProjection -- SetSet dialog box in one of the following ways
bull Select the EditEdit PreferencesPreferences command and open the 3D Options3D Options preferencespanel Under 3D Options3D Options click the 3D Options3D Options button
bull Click the Convert to 2D illustrationConvert to 2D illustration button on the 3D Tools3D Tools toolbar
Whatrsquos New 17
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
Next in the 3D Projection - Set3D Projection - Set dialog box select remove hidden linesremove hidden lines and the fillfillcontourcontour check box and then click OptionsOptions In the Options - SetOptions - Set dialog box pick anew default color under Fill contour with colorFill contour with color Click OKOK to exit each dialog boxand apply the new default color setting for the active 3D set
SelectSelect PreferencePreference forfor TransformingTransforming InvisibleInvisible 3D3D PartsParts
In the 3D Options3D Options preferences panel select the new Transformations includeTransformations includeinvisible partsinvisible parts check box under 3D Edit Window3D Edit Window to enable invisible parts inside oftransformed 3D objects to be transformed as well This 3D Options3D Options preferencesetting is Application-level only after you change it the change applies to allillustration files you open in the current Arbortext IsoDraw session
NoteNote
The ability to transform hidden parts includes ScaleScale transformations of placed 3Dobjects that were projected into 2D with keep 3D datakeep 3D data selected in the 3D Projection3D Projection
dialog box
The 3D Options3D Options preferences panel setting Transformations include invisible partsTransformations include invisible partscorresponds to the CADprocess_TransformInvisible3DSubObjectssetting in the Arbortext IsoDraw preferences file IsoDraw 72Preferencesprf which was implemented in release 71 M030
To change this preference setting in an Arbortext IsoDraw macro set the propertyappoptions3DtransformInvisibleObjects true or false TheArbortext IsoDraw macro recorder records an interactive change to the state of theTransformations include invisible partsTransformations include invisible parts check box in this propertyrsquos boolean state
SaveSave FreeFree AxesAxes inin 3D3D ModeMode
If you create one or more free axes in 3D mode you can save them in a version 72ISO file
1 In 3D mode create one or more free axes
2 While still in 3D mode save the ISO 72 file and close it All free axes youcreated are saved and will be available the next time you open the file
18 Arbortextreg IsoDrawreg Release Notes
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
AlignAlign 3D3D ObjectsObjects toto aa CoordinateCoordinate oror FreeFree AxisAxis
You can use the new 3D mode EditEdit menu AlignAlign commands or the corresponding
3D align to axis tools on the 3D Tools3D Tools toolbar to align a 3D objectto
bull A coordinate (X Y or Z) axis for example to align the edge of an object withthe X Y or Z axis (See 3D Align to X Y or Z Axis)
bull A free axis for example to align a bolt shaft with the hole in a nut (See 3DAlign to Free Axis)
NewNew ConditionsConditions inin thethe SelectSelect ElementsElementsDialogDialog BoxBoxThe Select elementsSelect elements dialog box (click EditEdit SelectSelect) provides the new selectionconditions below for elements groups and layers in Arbortext IsoDraw 72 F000(See Select for details)
ItemItem totoSelectSelect
ConditionCondition DescriptionDescription
ElementElement orGroupGroup
(is outsideis outside | isisinsideinside) withcompletelycompletely
selected orcleared
Selects elements or groups that are completelyor partially inside or outside of the drawingsheet (page) border
bull In 3D mode ElementElement selects 3D surfaces
bull GroupGroup selects the outermost or top groupBoundingBounding boxbox isis smallersmaller thanthan |
isis equalequal toto | isislargerlarger thanthan
Selects elements objects and groups if theirbounding box edge length is smaller thanequal to or larger than the length entered
LayerLayer isis equalequal toto | isisnotnot equalequal toto
Selects all elements and objects in a layer in 2Dmode (only) if the layer name is equal to or isnot equal to the specified layer name forexample (Standard layerStandard layer | BackgroundBackground | LayerLayer11 hellip |hellip LayerLayer nn)
ImprovedImproved AnimationAnimation EditingEditingNew and enhanced functions in the Edit Animation mode in Arbortext IsoDraw 72F000 give you more control over animation sequences and enable you build andmanage more complex animations
Whatrsquos New 19
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
ConcurrentlyConcurrently EditEdit MultipleMultiple AnimationAnimation ItemsItems
In the Edit AnimationEdit Animation and TimelineTimeline dialog boxes you can now
bull Assign or change animation attributes and values for several selected items(sequences steps or actions) at once
bull Delete multiple sequences steps and actions
For example selecting 20 objects in Edit AnimationEdit Animation mode and moving them all atonce creates 20 sequences one for each object If you want to repeat this sequence5 times for 10 of the 20 objects you can
1 Select the 10 sequences to want to repeat
2 In the Edit AnimationEdit Animation dialog box change the repeatrepeat value to 5
3 Click ApplyApply The repeat value 5 is applied to all 10 selected sequences
NoteNote
Some attributes and values cannot be concurrently applied to multipleanimation items These settings are unavailable when you make a multipleselection
GroupGroup AnimationAnimation SequencesSequences
Use the new Create collectionCreate collection and Release collectionRelease collection commands on the TimelineTimeline
dialog box context menu to group and ungroup currently selected sequencesSequence groups are named Collection 1Collection 1 Collection 2Collection 2 etc and are listed in theTimelineTimeline dialog box
Collections in Edit Animation mode work like groups in drawing mode
bull Selecting a collection selects all the sequences it contains
bull When a collection is selected changing a setting for one sequence in thecollection changes that setting for all sequences in the collection (Deselect thecollection if you do not want apply a change to all sequences it contains Youcan then directly select only the sequences you want to change)
bull Collections are saved in ISO 72 files (They are not saved in older ISO ornon-ISO file formats)
CopyCopy andand PastePaste AnimationAnimation ItemsItems
Use the CutCut CopyCopy PastePaste and DuplicateDuplicate commands on the Edit AnimationsEdit Animations dialogbox menu to apply sequences steps or actions for one object to another or toquickly create a duplicate sequence step or action for the current object
If you are only editing sequences you can use the Cut sequencesCut sequences CopyCopysequencessequences Paste to current timePaste to current time and Duplicate sequencesDuplicate sequences commands on theTimelineTimeline dialog box context menu
20 Arbortextreg IsoDrawreg Release Notes
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
SearchSearch andand ReplaceReplace AnimationAnimation ItemsItems
While (exactly) one animation item is selected you can click the Find equalFind equal or FindFindsimilarsimilar command on the Edit AnimationEdit Animation dialog box menu to extend the selection toall equal or similar animation items of the same type (sequence step or action)
NoteNote
The Find equalFind equal and Find similarFind similar commands are not available while multipleanimation items are selected
bull Find equalFind equal selects all animation items that have exactly the same settings as theanimation item you selected
bull Find similarFind similar opens a dialog box that lets you specify which settings to match forthe animation item you selected After you specify the settings to match andclick OKOK Find similarFind similar selects all animation items that have the specifiedmatching settings
See Find Equal Animation Items for the conditions Arbortext IsoDraw 72 uses todetermine if two animation item types are equal
CalloutCallout EnhancementsEnhancementsCallout functionality in Arbortext IsoDraw 72 F000 has been expanded to include
bull Calloutobject linking for single and multiple calloutsobjects
bull ATA (Air Transport Association)-style callout numbering
AboutAbout CalloutCalloutObjectObject LinksLinks
Arbortext IsoDraw 72 F000 introduces the ability to create and maintain calloutsthat are linked to objects and vice-versa Connected callouts can be createdmanually or generated from an external list such as a parts list or BOM (bill ofmaterial) (See Callouts Connected to Objects)
CreateCreate CalloutsCallouts LinkedLinked toto ObjectsObjects
The Palette Window Toolbox includes a new Connected calloutConnected callout tool forcreating callouts that are linked to objects To create connected callouts with thistool select the object or objects you want to link callouts to and then
bull Draw the new connected callouts directly on or near the objects (See DrawingConnected Callouts)
bull Click an existing calloutrsquos text frame to connect it to the selected objects (SeeConnecting Existing Callouts to Objects)
Whatrsquos New 21
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
ViewView CalloutCalloutObjectObject LinkLink InformationInformation
To see which callouts are linked to which objects and vice-versa in 72 F000
bull Right click a connected callout and then click Element infoElement info The element infoCalloutCallout dialog box shows object information for objects connected to theselected callout under Connected ObjectsConnected Objects Arrow buttons enable you to scrollthrough the object information for multiple connected objects
bull Right click an object with callouts connected to it and then click Object infoObject infoThe Object infoObject info dialog box shows a new CalloutCallout attribute The values of theCalloutCallout attribute (separated by semicolons) correspond to the callout text for allcallouts that are connected to the object
MovingMoving TransformingTransforming andand EditingEditing ObjectsObjects withwith LinkedLinked CalloutsCallouts
When you connect a callout to an object the anchor point of the calloutrsquos leaderline ldquoattachesrdquo to that object If you move that object by dragging it or using theMoveMove command (CTRL-M) the calloutrsquos leader line anchor point also movesmaintaining its position relative to the object
NoteNote
In a multi-object selection the callout leader only attaches to one object the firstobject selected This first-selected object is called the ldquoreference objectrdquo for thatconnected callout
If multiple callouts are connected to the same reference object and you move thatreference object the leader line anchor points for all the connected callouts alsomove
(See Moving Objects with Connected Callouts)
If you transform (eg rotate or scale) an object with linked callouts the calloutleader line anchor points remain fixed
If you cut or copy linked objects or callouts then paste them their objectcalloutlinks will be broken To link them reapply the objectcallout connection procedure
1 Click the Connected calloutConnected callout tool
2 Click the object(s)
3 Click the callout text
ChangingChanging LayersLayers forfor ObjectsObjects withwith LinkedLinked CalloutsCallouts
Objects and their linked callouts can be on different layers This enables you to forexample create a layer for callouts that you can make visible or invisible
22 Arbortextreg IsoDrawreg Release Notes
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
To move connected objects or callouts to a different layer without breaking theirobjectcallout links use the Selection to active layerSelection to active layer command on the LayerLayer menuin the AttributesAttributes window
GenerateGenerate LinkedLinked CalloutsCallouts forfor ObjectsObjects andand ObjectObject ListsLists
Select the new Link callouts to objectsLink callouts to objects check box in the Create calloutsCreate callouts dialog boxto generate linked callouts automatically for any of the following
bull Graphic objects in the illustration
bull An object list in a file
bull A BOM (bill of material) XML file
To access this new option open the ObjectsObjects window and click Generate calloutsGenerate calloutsfor objectsfor objects on the ObjectsObjects window menu (See Generating Connected CalloutsAutomatically)
NoteNote
You can only generate linked callouts for objects Assign object information tographical elements before you attempt to generate linked callouts for them
ApplyApply ATA-ATA-stylestyle CalloutCallout NumberingNumbering
Arbortext IsoDraw 72 F000 provides a new ATA callout numbering scheme thatenables you to number (or renumber) callouts following ATA callout stylestandards To apply this numbering scheme for callouts open the Edit callout styleEdit callout style
dialog box and select Numeric ATANumeric ATA in the SchemeScheme box
ImprovedImproved AutoCADAutoCAD DWGDWGDXFDXF ImportImportInterfaceInterfaceThe AutoCAD DWGDXF file import dialog boxes and preferences have beenupdated and reorganized for Arbortext IsoDraw 72 F000 The enhancements(summarized below) make it easier to reuse AutoCAD files in Arbortext IsoDrawillustrations They also give you more flexibility during the DWGDXF importprocess (For details see DWG or DXF in the Arbortext IsoDraw Data ExchangeReference)
SelectSelect AutoCADAutoCAD LayoutLayout toto ImportImport
If the DWGDXF file you are importing into Arbortext IsoDraw 72 F000 wassaved with layout preview images in AutoCAD the previews are shown in theDWGDWG or DXFDXF import dialog box along with the AutoCAD layout name
Whatrsquos New 23
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
Furthermore if the DWGDXF file has multiple layouts you can graphically selectthe layout to import under Select LayoutSelect Layout in the DWGDWG or DXFDXF import dialog boxusing the new preview image navigation buttons
ApplyApply AutoCADAutoCAD UnitsUnits toto ArbortextArbortext IsoDrawIsoDraw FileFile
In Arbortext IsoDraw 72 F000 you can use the new Use same units as in theUse same units as in theoriginal file (if exists)original file (if exists) check box in the DWGDWG or DXFDXF import dialog box to force themeasurement units in the target ISO file to match the units in the source DWGDXF file you are importing
This units-matching option
bull Helps ensure that imported DWGDXF files do not appear too small or toolarge to after they are imported into Arbortext IsoDraw
bull Reduces the need to experiment with different scale factors when importingDWFDXF files
NoteNote
To take advantage of this new option the measurement units used to create theAutoCAD drawing must be saved in the DWGDXF file
ClipClip AutoCADAutoCAD ViewportViewport MasksMasks inin thethe ArbortextArbortext IsoDrawIsoDraw FileFile
When you select the new Support viewports clippingSupport viewports clipping check box in the DWGDWGOptionsOptions or DXF OptionsDXF Options dialog box Arbortext IsoDraw 72 F000 will do thefollowing in the target ISO file
bull Import AutoCAD layout viewports as viewport-shaped Arbortext IsoDrawmasks
bull Clip elements outside the viewport-shaped masks
After clipping only elements and portions of elements inside of masks are visible
ConvertConvert AutoCADAutoCAD MLEADERMLEADER andand TABLETABLE EntitiesEntities toto ArbortextArbortextIsoDrawIsoDraw ElementsElements
Arbortext IsoDraw 72 F000 adds the MLEADER and TABLE entities to the list ofAutoCAD entities that you can select to convert on import in the DWG OptionsDWG Options andDXFDXF OptionsOptions dialog boxes
bull MLEADER entities convert to line elements and MTEXT (MTEXT isconverted according to MTEXT import definitions)
bull TABLE entities convert to a group of basic elements such as text and lines
24 Arbortextreg IsoDrawreg Release Notes
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
BreakBreak AutoCADAutoCAD MTEXTMTEXT LEADERLEADER andand HATCHHATCH EntitiesEntities intointo ElementsElements
To enable better rendering of some types of imported AutoCAD MTEXTLEADER and HATCH entities Arbortext IsoDraw 72 F000 provides options tobreak these entities into elements during import Use the new check box optionsbelow found in the DWG OptionsDWG Options and DXF OptionsDXF Options dialog boxes to enable theseoptions
bull Break Mtext into elementsBreak Mtext into elements can improve the appearance of imported multi-linetext in the target ISO file
bull Break Leader into elementsBreak Leader into elements can improve the proportions of AutoCADLEADER arrowheads after they are converted to line element arrowheads Thisoption can also improve the appearance of a variety of LEADER line ends afterconversion including square triangular and diamond-shaped ends
bull Break Hatch into elementsBreak Hatch into elements can improve the appearance of hatch patterns in thetarget ISO file when they are derived from complex AutoCAD HATCHentities
Whatrsquos New 25
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
33SPRsSPRs
Fixes and enhancements implemented in Arbortext IsoDraw 72 are listed bySoftware Performance Report (SPR) number in the table below
7272 F000F000
SPRSPR DescriptionDescription2040665 The maximum number Arbortext IsoDraw templates that can be
shown in the submenu of the FileFile NewNew command has beenincreased to 32
2035656 Generating callouts for objects from a text file that has only one lineafter the header no longer produces the warning messageInvalid value expression 3 does not present avalue between 1 and 2
2035030 A macro can now read a text file that contains a single straightquote () character (an unclosed quote) without producing the errorMacro ERRor Wrong Parameter xx Double
2033883 The FileFile SaveSave command is now available if the only change youmade to an ISO file since the last save was a change made to a pixelgraphic in that ISO file using the ElementElement Edit imageEdit image command
1994311 The Arbortext IsoDraw Macro Language (IML) PRINT commandnow supports page selection parameters This enhancement enableda macro to save changes to print page selection defaults as desiredFor more information see the FileFile menu command syntax for
27
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionPRINT in the Arbortext IsoDraw Macro Language Reference
NoteNote
If the PRINT command includes a page selection parameter themacro does not open the PrintPrint dialog box when executing PRINT
1978919 All 3D assemblies are now shown as expected when converting aparticular imported 3D ProductView ed file to 2D inArbortext IsoDraw running on 64-bit Windows XP
1967663 When a Windchill PVZ object with non-standard content in itscadID field is placed in an ISO file 3D mode operations inArbortext IsoDraw such as exploding parts can now besuccessfully applied to the placed PVZ objectrsquos 3D data
1948047 Text in an ISO file exported to PDF now appears at the correct sizeand position in the output PDF file
1945711 Zooming the Arbortext IsoDraw window in or out while viewing aparticular ISO file no longer causes some lines in that ISO file toappear rotated
1938706 Arbortext IsoDraw no longer erroneously assigns the color blue to a3D model imported from a particular IGES file
1919951 Performing one of the following Arbortext IsoDraw operations onan ISO file containing a particular placed IGES 3D CAD file nolonger causes a premature exit saving the ISO file showing orhiding objects converting the 3D model to a 2D illustration
1896553 Lines with the Phantom linePhantom line linestyle and Bezier curves with manyclosely-spaced control points now export from ISO to TIFF fileformat with the line quality expected
1889431 A new set of IML macros were created for changing the height andwidth of a specified CGM file Running these macros in theArbortext IsoDraw Batch process wizardBatch process wizard dialog box enabled a setof 250 CGM files to be resized to fit A2 paper in one batch process
1873524 When exporting a color or grayscale CGM file to a 2-color (blackand white) PNG raster file all 2 black and 3 black colorelements and fills in the CGM file now correctly appear as whitecolor elements and fills in the exported 2-color PNG
1864365 Continuous border lines in a ProENGINEERWildfire 40 (ProEWF4) file now appear continuous (as expected) in an exported ISOfile after performing the following operations
28 Arbortextreg IsoDrawreg Release Notes
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescription
bull Export the ProE WF4 file to Arbortext IsoDraw using theArbortext ProE2Iso ProTOOLKIT application with TesselationTesselationAccuracyAccuracy set to 1 (fine) in the IsoDraw 3D OptionsIsoDraw 3D Options dialog box
bull In Arbortext IsoDraw convert the exported ProE WF4 3DCAD data to a 2D illustration with remove hidden linesremove hidden lines andcreate surface borderscreate surface borders selected in the 3D Projection - Set3D Projection - Set dialogbox
1843380 Adding 3D cuts to a 3D model before converting it to a 2Dillustration no longer reduces the size of the selection rectangle thatcontains the 2D object after conversion The selection rectangleafter 2D conversion is the same size regardless of whether 3D cutswere made or not
1829498 To improve performance in ISO files that contain a large number ofobjects Arbortext IsoDraw no longer rebuilds the contents of theopen ObjectsObjects window AttributesAttributes window or LayersLayers window in thecurrently active Arbortext IsoDraw window after the user switchesback to Arbortext IsoDraw from a different application
1798217 After importing a particular STEP file in Arbortext IsoDraw the 3Dmode window now displays the imported 3D CAD data asexpected
1797313 For Arbortext IsoDraw 71 F000 and above A CGM file which isexported from Arbortext IsoDraw using the WebCGM 10 or 20profile and then re-imported will have the correct drawing extentsif
bull Bounding box of visible elementsBounding box of visible elements was selected under VDC ExtentVDC Extent
in the CGMCGM dialog box when the CGM file was exported (TheCGMCGM dialog box is available from the CGM ExportCGM Export preferencespage by clicking the AdvancedAdvanced button)
bull The Clip to VDC ExtentClip to VDC Extent check box is selected on the CGM ImportCGM Import
preferences page when the CGM file is re-imported
1787873 Text in an AutoCAD 2004 DWG file now appears in the correctposition in the ISO file when the DWG file is imported intoArbortext IsoDraw
1769093 All selected subassemblies in two particular ProENGINEERassembly (asm) files are now imported into Arbortext IsoDraw asexpected
1743233 For Arbortext IsoDraw 71 F000 and above The showhide objecteyeeye icon is now available in the ObjectsObjects window on all visible
SPRs 29
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-
7272 F000F000 (continued)(continued)
SPRSPR DescriptionDescriptionlayers in a placed 3D CAD file (including a particular placed IGESfile)
1733135 When a particular ProductView EDZ file which was exported fromProE WF4 is placed in Arbortext IsoDraw all expected surfacefeatures now appear in Arbortext IsoDraw
1729715 Some Chinese characters in an AutoCAD 2000 file that were notshown correctly in the Simplified Chinese-language version ofArbortext IsoDraw after the file was imported now appear correctlyafter import
1728058 A particular set of ProductView (ol and ed) format files can nowbe successfully imported into the Japanese-language version ofArbortext IsoDraw 70 M060 and above
1703342 For Arbortext IsoDraw 70 M050 and above An Arbortext IsoDrawdrawing that contains raster image elements now prints the rasterimage elements correctly on an HP LaserJet 9040n printer (andother HP printer and plotter models)
1702413 For Arbortext IsoDraw 71 F000 and above The ability to select asingle component in a placed 3D CAD file (including the particularplaced IGES file referenced in this SPR) has been improved
1663014 After updating a particular placed IGES file with a newer versionusing the EditEdit menu command in the Placed FilesPlaced Files window (in theAttributesAttributes window) all included components in the new version ofthe placed IGES file are present in the ObjectsObjects window as expected
1648154 For Arbortext IsoDraw 70 M061 and above When a particular ISOfile is printed on an HP LaserJet 5100 plotter (or other printers)parallel lines in the file no longer intersect
30 Arbortextreg IsoDrawreg Release Notes
- About This Guide
- Platform Support
-
- Supported Operating Systems and Web Browser
- System Requirements
-
- Whatrsquos New
-
- New Arbortext IsoDraw 72 File Format
- 3D Enhancements
- New Conditions in the Select Elements Dialog Box
- Improved Animation Editing
- Callout Enhancements
- Improved AutoCAD DWGDXF Import Interface
-
- SPRs
-