Subject to change without prior notice

Römheld GmbH · Postfach 1253 · 35317 Laubach, Germany · Tel.: +49 (0) 6405 / 89-0 · Fax: +49 (0) 6405 / 89-211 Actual issue see www.roemheld.com

InformationPower workholding - S016

Issue 9-11 E

Electro-Mechanical Clamping SystemsThe new product family E-Tec

Electric swing clampClamping force 7 kNClamping stroke 23 mmSwing angle max. 180°Data sheet B 1.8310

ApplicationElectro-mechanical clamping elements areused for clamping or supporting of workpieces,

- where the application of hydraulic or pneu-matic power workholding is not possible ordesired.

- if the elements have to be separately controlled, adjusted or monitored.

- where the clamping force must be maint -ained also after the separation or the failureof the energy supply

- if the larger space requirements comparedwith hydraulic elements is not of importance.

Electric work supportMax. load force 20 kNPlunger stroke 20 mm

Electric block cylinderClamping force 10 kN (24 V DC)

20 kN (48 V DC)Stroke 100 mm

Electric zero-point clampRetention force 5 kN

Electro-magnetic release

Electric wedge clamping elementClamping force 65 kNClamping stroke 25 mm

Special suitability● Automatic manufacturing systems● Clamping fixtures with workpiece loading

via handling systems● Robotics● Assembly equipments● Test systems● Special machines● Clean room areas● Food industry● Packaging industry

Advantages● Clamp by wire● Current as the only medium● Safe low voltage 24 V DC● Integration in machine control possible● Individual control of the elements● Individual adjustment of clamping force● Position monitoring integrated● Function control with error message● Mechanical self-locking in case of

power failure

Electric machine viceClamping force 15 kNClamping stroke 96 mm