itk - differential transmitter b 3051 itk-transmisor diferencial b... · itk - differential...
TRANSCRIPT
ITK - DIFFERENTIALTRANSMITTER B 3051
Leaders in the supply of equipmentfor industrial production processes
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
2M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
INSTRUTEK-B series pressure/different pressure/ √∆P transmitter (3051 shape)
Products Outline
INSTRUTEK-B series pressure/ different pressure/ √ΔP transmitter adopts the advanced microprocessor technology and digit communication technology. Besides having all the functions of normal intelligent type, it also has a series of enhance functions such as zero position automatic regulation, remote inspect the field control parameter and adjust control parameter pass number locked and so on. At the same time, it can carry though remote parameter enactment, remote control, self-diagnoses etc function by field bus HART protocol.ts have many kinds of model and process connection form and material, which is adaptable to various measuring field.
Main characteristics
High accuracy, little temperature impact•Zero automatic regulation•Stability: Micro differential pressure: 0.02%FS/year•
Usual differential pressure: 0.025%FS/yearControl parameter cipher locked, make sure security.•Weight lightly, small volume•The ratio of measuring range is big•Software compensation•While changing range may not introduce pressure•The failure self--diagnosis•Waterproof, dust--proof, shockproof, explosion--proof, corrosion--proof•Linear and evolution output combine•Field bus HART protocol communication•
Technical parameter
Measuring medium liquid, gas and streamMeasuring range Differential pressure: 0~0.16 kPa to 0~10 MPa Relative pressure: max 0~40 MPa min 0~0.16 KPa Absolute pressure: max 0~25 MPa min 0~20 KPaRate of range removal 100: 1 (intelligent type)
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
3
Communications output Power voltage: (16.4~45 )V DC, (16.4~30 ) V DC intrinsic safety type Communications distance: 2 km when using CEV cable Load capacity: below 0.22μF Load induction: below 3.3 mH Space with power line: above 15 cm Input impedance of receiving instrument which connect on the receiving resistance above 10 KΩ when2.4 KHzOutput signal 4 mA~20 mA DC two wire systemAccuracy 0.075 grade, 0.2 grade. 0.5 gradeEnvironmental temperature –40˚C~85˚CStorage temperature -40˚C~100˚CExplosion-proof rank Iintrinsic safety type ExibIICT6 or ExibIICT6 Explosion-proof type ExdIIBT5 or ExdIICT6Dynamic performance Delay time and renovation rate suitable for all models and range, which only limits analog output Delay time (Td): 45 ms (normal value) Renovation rate: 22 times / s Total responding time: (Td + Tc)
Typical responding time of intelligent transmitter
Effect of environmental temperature change Zero drift: 0.5%FS/50˚C Range drift: 0.7%FS/50˚CMeasuring medium temperature –40˚C~100˚CRelative humidity 0~100% RHEffect of power voltage variation ±0.005% FS/VEffect of installation position variation The maximum may cause 0.25 kPa zero errors, but can be adjusted, does have not the influence to the measuring range.“O” type sealing ring Fluorine rubber, nitrile rubberFilled fluid Silicon oil or inert oilStart time The transmitter reaches performance index within power up 2 sDamping time the transmitter reaches performance index within power up 2 s, the response time of which analog output respond to step input can be selected by user(0~36 s). This software setup damping value not includes response time of sensor.Bolt stainless steelLead-pressure connection unit flange 1/4 –18 NPT center distance 54 mm; joint 1/2 –14 NPT or M20×1.5 positive thread; when spherical cone section sealed with joint, the center distance is 50.8, 54, 57.2 mmConnection unit material Refer to “type spectrum table”Shell low copper Alumimium alloy shell, 1/2 –14 NPT, G1/2 and M 20×1.5. HART interface fixed on the terminal pieceLacquer: Polyurethane polyethylene resin baking varnishProtection grade IP67Field indication 100% indicating meter (selection) LCD digital display (selection) LED digital display (selection)
20m A
9.89m A
4m A
Response time = Td + Tc63.2% of step change
Time
Releasing pressureTd
Td = Delay timeTc = Time Constant
Tc
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
4M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
External adjusting zero Continuous regulatable or adjustment by software Resolution: 0.05% of rangeThe zero removal scope Negative direction removal and positive direction removal quantity both can be removed at lower/upper limit value of measure scope of sensor.Weight 3.5 kg (do not include selection)
Load characteristics
Outline dimension (unit: mm)
E - 10.50.0236
R =
CommunicatableScope
650
Load resistance R250 (Ω)
Power voltageRelation between power voltage and load resistance
Line side of the transmitter
Connectionterminal side Meter chamber
Line side of the transmitter
When do not use joint, is is ¼ 18 NPTon the pressure container
Joint is ½ - 14 NPT or M20X1.5 positive thread
Nameplate
M 20 X 1.5Signal line hole
(Two place)
Bleeder
Joint
138
179
¼ 18 NPTSide bleeder hole(upperor lower)
Range (MPa)
A (mm)
0~0.001 to 0 0.0060~0.006 to 0~0.040~0.04 to 0~0.20
~0 0.16 to 0 1~ ~ 0 0.4 to 0 2.5~ ~ 0 0.16 to 0 10~ ~ 0 0.4 to 0 25~ ~
54 55.2 55.6 57.2 57.6
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
5
Application scopeINSTRUTEK –BLT series single-flange pressure transmitter (3051 shape)
Characteristics
Measuring object: liquid level of open or sealed container•Measuring accuracy for liquid level is 0.25%•Measuring range: 6 kPa~2000 kPa•3/4-inch flat membrane type or extend type diaphragm•Many filled oil can be selected, where may conform to various application requirements•Damping is adjustable•Meet liquid-level material: stainless steel, Hutchison Alloy C-276 and Tantalum•
Outline dimension (unit: mm)
Line side for the transmitter
Line side for the transmitter
With sealedslot bleeder
¼ 18 NPT
¼ 18 NPTBleeder
Bleeder
138
138
197
197
B C
Side bleeder hole(up or down) A
Side bleeder hole(up or down) A
Flanged dimension (mm) Bolt hole (mm)
Ordercode Dimension
Ratedpressure
Externaldiameter A B C Number Hole
diameterHole distribute
diameter
ABCD
3"4"3"4"
150 Ib150 Ib300 Ib300 Ib
190230210255
22222730
66
6689
89
127
127157
157
4
88
8 2020
2222
152.5190.5168.5200
Flange dimension and bolt hole specification
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
6M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
INSTRUTEK –BGP/BDP series remote pressure / differential pressure transmitter (3051 shape)
Outline dimension (unit: mm)
EnclosureInstallation support
Characteristics
Measuring object: high temperature corrosion or viscous fluid•Measuring accuracy for liquid level is 0.25%•Measuring range: 6 kPa~2000 kPa•3/4-inch flat membrane type or extend type diaphragm•Many filled oil can be selected, where may conform to various application •requirementsDamping is adjustable•Meet liquid-level material: stainless steel, Hutchison Alloy C-276 and Tantalum•
Line side for the transmitter
Bleeder
With sealed slotface
¼ 18NPTSide bleeder hole(up or down)
138
197
Line side for the transmitter
Bleeder
With sealed slotface
¼ 18NPTSide bleeder hole(up or down)
9895
71.4
67
67
67
143
143
41.3
Pipe-mounting bended support
114
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
7
Disk-mounting bend ed supp ort
Pipe-mounting flat support
95
41.3
98
Ф9.5Installationhole
71.471.4
36
3667114
41.7
30.2
54
71.4
41.3
Lead pressure connector as follows
1 2 3 4 5 6
Ф13
M20 X1.5
1 3 4¼NPT
½NPT
2
3
Ф6
Ф13
½NPT1 2
Cone tubenegative thread
A1. Connection of cone pipe negative thread (option code “/N”)1. Pressure chamber flange for the transmitter2. “O”-type ring3. Cone pipe negative thread connection joint4. Bolt
A2. 1/2–14 NPT lead pressure transition joint and back welding lead-pressure option (option code “C12”)1. 1/2 –14 NPT transition joint connected with spherical cone2. Nut M20 ×1.53. Spherical joint (ф13 place may be welded with lead pressurepipe)
A3. T shape joint connection (option code “J”)1. Pressure chamber flange for the transmitter2. “O”-type ring3. Spherical cone connection joint M20×1.5 positive thread4. Bolt5. Nut6. Spherical joint (ф13 place may be welded with lead pressure tube)
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
8M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
Type spectrum table for INSTRUTEK –BGP/BAGP series pressure transmitter
Model Explanation
Membranematerial
-BGP-BAGP
3051 shape pressure transmit ter3051 shape intelligent pressure transmit ter
34567890
0~1 6kPa~0~6 40kPa~0~40 200kPa~0~160 1000kPa~0~0.4 2.5MPa~0~1.6 10MPa~0~4 25MPa~0~6 40MPa~
ESI
OutputGeneral analog type (4~20)mA DC with adjustable dampingStandard digital type (4~20) mADC with keystroke adjustmentStandard intelligent type (4 20)mA DC keystroke set up with HART protocol)~
Flange joint Drain/vent valve Isolation diaphragm
1213141522232425333544
Carbon steel cadmium plated 316 SST 316LSSTCarbon steel cadmium plated
Carbon steel cadmium platedCarbon steel cadmium plated
Hutchinson alloy C Hutchinson alloy CMonel metal Monel
316SST Tantalum316SST316SST
316SST316SST
316LSSTHutchinson alloy C
316SST316SST
316SST316SST Monel
TantalumHutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CTantalum
Monel
Constructionmaterials
Linear indicator (0~100% scale)LCD digital range display (liquid crystal)LED digital range display (numeral tube)0 100% of LCD digital range display (liquid crystal)~0~100% of LED digital range display (numeral tube)LCD digital range display with backlignt (numeric type option)LCD digital range display without backlignt (numeric type option)Bending bracket for pipe installation (2” pipe)Bending bracket for panel installationFlat bracket for pipe installation (2”pipe)Drain/vent valve at the face of flange backSide drain/vent valve on the top of flangeSide drain/vent valve under of the flange1/4-18NPT cone tube negative threadJoint of “ 丁” shape: positive tread of m20X1.5 and back weldedlead-pressure pipe (stainless steel)N-type joint: 1/2-14NPT cone tube negative thread
1/2-14NPT lead pressure transition joint and back welded lead pressure pipe(stainless steel)
Option
M1M3M4M5M6M7M8B1B2B3D0D1D2P
J
N
C12
SDI
Explosionproof rank
Standard (without explosion proof)Isolated explosion ExdIIBT5 or ExdIICT6Intrinsic safety ExiaIICT6 or ExibIICT6 (commonly choice)
25
0.20.5
Accuracyrank
7 0.075 (intelligent can be select)Option as an example INSTRUTEK–BAGP3I22M3B1D0JS2
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
9
Model Explanation
Membranematerial
-BAP-BAAP
3051 shape absolute pressure transmit ter3051 shape intelligent absolute pressure transmit ter
45678
0~6 40kPa~0~40 200kPa~0~160 1000kPa~0~0.4 2.5MPa~0~1.6 10MPa~
ESI
OutputGeneral analog type (4~20)mA DC with adjustable dampingStandard digital type (4~20) mADC with keystroke adjustmentStandard intelligent type (4 20)mA DC keystroke set up with HART protocol)~
Flange joint Drain/vent valve Isolation diaphragm
1213141522232425333544
Carbon steel cadmium plated 316 SST 316LSSTCarbon steel cadmium plated
Carbon steel cadmium platedCarbon steel cadmium plated
Hutchinson alloy C Hutchinson alloy CMonel metal Monel
316SST Tantalum316SST316SST
316SST316SST
316LSSTHutchinson alloy C
316SST316SST
316SST316SST Monel
TantalumHutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CTantalum
Monel
Constructionmaterials
Linear indicator (0~100% scale)LCD digital range display (liquid crystal)LED digital range display (numeral tube)0 100% of LCD digital range display (liquid crystal)~0~100% of LED digital range display (numeral tube)LCD digital range display with backlignt (numeric type option)LCD digital range display without backlignt (numeric type option)Bending bracket for pipe installation (2” pipe)Bending bracket for panel installationFlat bracket for pipe installation (2”pipe)Drain/vent valve at the face of flange backSide drain/vent valve on the top of flangeSide drain/vent valve under of the flange1/4-18NPT cone tube negative threadJoint of “ 丁” shape: positive tread of m20X1.5 and back weldedlead-pressure pipe (stainless steel)N-type joint: 1/2-14NPT cone tube negative thread
1/2-14NPT lead pressure transition joint and back welded lead pressure pipe(stainless steel)
Option
M1M3M4M5M6M7M8B1B2B3D0D1D2P
J
N
C12
SDI
Explosionproof rank
Standard (without explosion proof)Isolated explosion ExdIIBT5 or ExdIICT6Intrinsic safety ExiaIICT6 or ExibIICT6 (commonly choice)
25
0.20.5
Accuracyrank
7 0.075 (intelligent can be select)Option as an example INSTRUTEK-BAAP5I22M3B1D0JS2
Type spectrum table for INSTRUTEK –BAP/BAAP series absolute pressure transmitter
Note: If choose the product with explosion-proof intrinsic safety which needs to take the meter, only can take the pointer meter. The parts of white •characters mean special requirement; please consult when ordering.
Note: If choose the product with explosion-proof intrinsic safety which needs to take the meter, only can take the pointer meter. The parts of white •characters mean special requirement; please consult when ordering.
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
10M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
Type spectrum table for INSTRUTEK –BDR/BADR series micro differential pressure transmitter
Model Explanation
-BDR-BADR
ESI
OutputGeneral analog type (4~20)mA DC with adjustable dampingStandard digital type (4~20) mADC with keystroke adjustmentStandard intelligent type (4 20)mA DC keystroke set up with HART protocol)~
Flange joint Drain/vent valve Isolation diaphragm
1213141522232425333544
Carbon steel cadmium plated 316 SST 316LSSTCarbon steel cadmium plated
Carbon steel cadmium platedCarbon steel cadmium plated
Hutchinson alloy C Hutchinson alloy CMonel metal Monel
316SST Tantalum316SST316SST
316SST316SST
316LSSTHutchinson alloy C
316SST316SST
316SST316SST Monel
TantalumHutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CTantalum
Monel
Constructionmaterials
Linear indicator (0~100% scale)
LCD digital range display (liquid crystal)LED digital range display (numeral tube)0 100% of LCD digital range display (liquid crystal)~0~100% of LED digital range display (numeral tube)LCD digital range display with backlignt (numeric type option)LCD digital range display without backlignt (numeric type option)Bending bracket for pipe installation (2” pipe)Bending bracket for panel installationFlat bracket for pipe installation (2”pipe)Drain/vent valve at the face of flange backSide drain/vent valve on the top of flangeSide drain/vent valve under of the flange1/4-18NPT cone tube negative threadJoint of “ 丁” shape: positive tread of m20X1.5 and back weldedlead-pressure pipe (stainless steel)N-type joint: 1/2-14NPT cone tube negative thread
1/2-14NPT lead pressure transition joint and back welded lead pressure pipe(stainless steel)
Option
M1
M3M4M5M6M7M8B1B2B3D0D1D2P
J
N
C12
S
DI
Explosionproof rank
Standard (without explosion proof)
Isolated explosion ExdIIBT5 or ExdIICT6Intrinsic safety ExiaIICT6 or ExibIICT6 (Ordinary)
25
0.20.5
Accuracyrank
7 0.075 (intelligent)Option as an example INSTRUTEK-BADR2A22M3B3D2JS2
3051 shape micro dif ferential pressure transmit ter3051 shape intelligent micro dif ferential pressure transmit ter
Measuring range Working static pressure2A
2B
2C
Measuringrange
0~0.16 1.0kPa~0~0.16 1.0kPa~0~0.16 1.0kPa~
1Mpa2.5Mpa4Mpa
J Standard intelligent type (4 20) mA DC output is √P with adjustable damping~
M2 Square root pointer meter (0 100% scale)~
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
11
Type spectrum table for INSTRUTEK -BDP/BADP series low, medium,high differential pressure transmitter
Note: If choose the product with explosion-proof intrinsic safety which needs to take the meter, only can take the pointer meter. The parts of white •characters mean special requirement; please consult when ordering.
Model Explanation
-BDP-BADP
ESI
OutputGeneral analog type (4~20)mA DC with adjustable dampingStandard digital type (4~20) mADC with keystroke adjustmentStandard intelligent type (4 20)mA DC keystroke set up with HART protocol)~
Flange joint Drain/vent valve Isolation diaphragm
1213141522232425333544
Carbon steel cadmium plated 316 SST 316LSSTCarbon steel cadmium plated
Carbon steel cadmium platedCarbon steel cadmium plated
Hutchinson alloy C Hutchinson alloy CMonel metal Monel
316SST Tantalum316SST316SST
316SST316SST
316LSSTHutchinson alloy C
316SST316SST
316SST316SST Monel
TantalumHutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CTantalum
Monel
Constructionmaterials
Linear indicator (0~100% scale)
LCD digital range display (liquid crystal)LED digital range display (numeral tube)0 100% of LCD digital range display (liquid crystal)~0~100% of LED digital range display (numeral tube)LCD digital range display with backlignt (numeric type option)LCD digital range display without backlignt (numeric type option)Bending bracket for pipe installation (2” pipe)Bending bracket for panel installationFlat bracket for pipe installation (2”pipe)Drain/vent valve at the face of flange backSide drain/vent valve on the top of flangeSide drain/vent valve under of the flange1/4-18NPT cone tube negative threadJoint of “ 丁” shape: positive tread of m20X1.5 and back weldedlead-pressure pipe (stainless steel)N-type joint: 1/2-14NPT cone tube negative thread
1/2-14NPT lead pressure transition joint and back welded lead pressure pipe(stainless steel)
Option
M1
M3M4M5M6M7M8B1B2B3D0D1D2P
J
N
C12
SDI
Explosionproof rank
Standard (without explosion proof)Isolated explosion ExdIIBT5 or ExdIICT6Intrinsic safety ExiaIICT6 or ExibIICT6 (Ordinary)
Measuring range Working static pressure3
4
5Measuring
range
0~1 6kPa~0~6 40kPa~
0~40 200kPa~
4Mpa
J Standard intelligent type (4 20) mA DC output is √P with adjustable damping~
M2 Square root pointer meter (0 100% scale)~
3051 shape low, medium and high dif ferential transmit ter3051 shape low, medium and high dif ferential transmit ter
678
0~160 1000kPa~0~0.4 2.5MPa~0~1.6 10MPa~
10Mpa10Mpa
10Mpa10Mpa
10Mpa
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
12M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
25
0.20.5
Accuracyrank
7 0.075 (intelligent)Option as an example INSTRUTEK-BADP4I22M3B1D0JS2
Model Explanation
-BDP-BADP
3051 shape low, medium and high dif ferential transmit ter3051 shape low, medium and high dif ferential transmit ter
Model Explanation
-BHP-BAHP
ESI
OutputGeneral analog type (4~20)mA DC with adjustable dampingStandard digital type (4~20) mADC with keystroke adjustmentStandard intelligent type (4 20)mA DC keystroke set up with HART protocol)~
Flange joint Drain/vent valve Isolation diaphragm
1213141522232425333544
Carbon steel cadmium plated 316 SST 316LSSTCarbon steel cadmium plated
Carbon steel cadmium platedCarbon steel cadmium plated
Hutchinson alloy C Hutchinson alloy C
Monel metal Monel316SST Tantalum
316SST316SST
316SST316SST
316LSSTHutchinson alloy C
316SST316SST
316SST316SST Monel
TantalumHutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy CHutchinson alloy C
Monel
Hutchinson alloy C
TantalumMonel
Constructionmaterials
Linear indicator (0~100% scale)
LCD digital range display (liquid crystal)LED digital range display (numeral tube)0 100% of LCD digital range display (liquid crystal)~0~100% of LED digital range display (numeral tube)LCD digital range display with backlignt (numeric type option)LCD digital range display without backlignt (numeric type option)
M1
M3M4M5M6M7M8
Measuring range Working static pressure3A
4A
5AMeasuring
range
0~1 6kPa~0~6 40kPa~
0~40 200kPa~
4Mpa
J Standard intelligent type (4 20) mA DC output is √P with adjustable damping~
M2 Square root pointer meter (0 100% scale)~
6A7A4B
0~160 1MPa~0~0.4 2.5MPa~
0~6 40kPa~
25Mpa
3051 high static pressure dif ferential pressure transmit ter3051 Intelligent high static pressure dif ferential pressure transmit ter
5B
25Mpa
0~40 200kPa~ 32Mpa32Mpa
25Mpa25Mpa
Option
Note: If choose the product with explosion-proof intrinsic safety which need to take the meter, only can take the pointer meter. The parts of white •characters mean special requirement; please consult when ordering.
Type spectrum table for INSTRUTEK –BHP/BAHPseries high static differential pressure transmitter
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
13
Note: If choose the product with explosion-proof intrinsic safety which needs to take the meter, only can take the pointer meter. The parts of white •characters mean special requirement; please consult when ordering.
Type spectrum table for INSTRUTEK –BLT/BALTsingle-flange pressure / liquid-level transmitter
25
0.20.5
Accuracyrank
7 0.075(intelligent may be choose)Option as an example INSTRUTEK –BAHP3AI22M3B3D0JS2
Model Explanation
-BDP-BADP
3051 shape low, medium and high dif ferential transmit ter3051 shape low, medium and high dif ferential transmit terBending bracket for pipe installation (2” pipe)Bending bracket for panel installationFlat bracket for pipe installation (2”pipe)Drain/vent valve at the face of flange backSide drain/vent valve on the top of flangeSide drain/vent valve under of the flange1/4-18NPT cone tube negative threadJoint of “ 丁” shape: positive tread of m20X1.5 and back weldedlead-pressure pipe (stainless steel)N-type joint: 1/2-14NPT cone tube negative thread
1/2-14NPT lead pressure transition joint and back welded lead pressure pipe(stainless steel)
Option
B1B2B3D0D1D2P
J
N
C12
SDI
Explosionproof rank
Standard (without explosion proof)Isolated explosion ExdIIBT5 or ExdIICT6Intrinsic safety ExiaIICT6 or ExibIICT6 (Ordinary)
Model Explanation
Measuringrange
-BLT-BALT
Flange type liquid level transmit ter (3051 shape)Intelligent flange type liquid level transmit ter (3051 shape)
4567
0~6 40kPa~0~40 200kPa~0~160 1000kPa~0~0.4 2.5MPa~
ESI
OutputGeneral analog type (4~20)mA DC with adjustable dampingStandard digital type (4~20) mADC with keystroke adjustmentStandard intelligent type (4 20)mA DC keystroke set up with HART protocol)~
Dimension Insert length High pressure side membrane
3"3"3"3"3"3"4"4"4"4"4"4"
Special requirement
000
50mm100mm150mm
000
50mm100mm150mm
Insertlength
316L SSTHutchinson alloy C
Tantalum
316L SST316L SST316L SST316L SST
Hutchinson alloy CTantalum
316L SST316L SST316L SST
A0A01A02A2A4A6B0B01B02B2B4B6Y
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
14M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
Flangedimension
ABCDE
3",150Ib4",150Ib3",300Ib4",300IbSpecial requirementLow pressure sidepressure container
and jointDrain/vent valve
Low pressureside isolation
diaphragmFilled liquid
Carbon steel withcadmium plating 316 SST 316LSST
Constructionmaterials
Silicon oil
316 SST316 SST 316LSST Silicon oil316 SST316 SST Hutchinson alloy C
Carbon steel withcadmium plating 316 SST Iner t liquid
Iner t liquid
316 SST
316 SST316 SST316 SST
12
2223
1A
2AY Special requirement
Model Explanation
-BLT-BALT
Flange type liquid level transmit ter (3051 shape)Intelligent flange type liquid level transmit ter (3051 shape)
DF
Filled liquid at high pressure side
Silicon oilIner t liquidLinear indicator (0~100% scale)LCD digital range display (liquid crystal)LED digital range display (numeral tube)
LCD digital range display with backlignt (numeric type option)LCD digital range display without backlignt (numeric type option)
M1M3M4M5M6M7M8
Option LCD digital (0-100%) displayLED digital (0-100%) display
25
0.20.5
Accuracyrank
Option as an example INSTRUTEK –BALT4IA0A22DM3S2
SDI
Explosionproof rank
Standard (without explosion proof)Isolated explosion ExdIIBT5 or ExdIICT6Intrinsic safety ExiaIICT6 or ExibIICT6 (Ordinary)
Note: If choose the product with explosion-proof intrinsic safety which needs to take the meter, only can take the pointer meter. The parts of white •characters mean special requirement, please consult when ordering.
Type spectrum table for INSTRUTEK –BGP/BDP/BAGP/BADPremote pressure/differential pressure transmitter
Model Explanation
-BGP-BDP
-BAGP-BADP
Remote pressure transmit ter (3051 shape)Remote dif ferential pressure transmit ter (3051 shape)Intelligent remote pressure transmit ter (3051 shape)Intelligent remote dif ferential pressure transmit ter (3051 shape)
Measuring range
4567
0~6 40kPa~0~40 200kPa~0~160 1000kPa~0~0.4 2.5MPa~
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
15
INSTRUTEK remote transmission device (3051 shape)
Type spectrum table for INSTRUTEK-RTW thread type remote transmission device Place an order for transmitter from the model specification, choosing the “fill oil” from sheet VI, choosing the capillary from VII.
Model Explanation
-BGP-BDP
-BAGP-BADP
Remote pressure transmit ter (3051 shape)Remote dif ferential pressure transmit ter (3051 shape)Intelligent remote pressure transmit ter (3051 shape)Intelligent remote dif ferential pressure transmit ter (3051 shape)
ESI
Output
General analog type (4~20)mA DC with adjustable dampingStandard digital type (4~20) mADC with keystroke adjustmentStandard intelligent type (4 20)mA DC keystroke set up with HART protocol)~
J Standard intelligent type (4 20) mA DC output is √P with adjustable damping~Flange joint Plug Isolation diaphragm
316SST 316SST 316L SSTConstruction material
22
One remote deviceTwo remote devices
S1S2
Remotetransmit ter device
Linear indicator (0~100% scale)
LCD digital range display (liquid crystal)LED digital range display (numeral tube)
LCD digital range display with backlignt (numeric type option)LCD digital range display without backlignt (numeric type option)
M1
M3M4M5M6M7M8
Option
M2Square root pointer meter (0 100% scale) ~ field indicato(dif ferential pressure selection)
0 100% of LCD digital range display (liquid crystal)~0~100% of LED digital range display (numeral tube)
Bending bracket for pipe installation (2” pipe)Bending bracket for panel installationFlat bracket for pipe installation (2”pipe)
B1B2B3
25
0.20.5
Accuracyrank
Option as an example INSTRUTEK - BADP4I22S2M3B3S2
SDI
Explosionproof rank
Standard (without explosion proof)Isolated explosion ExdIIBT5 or ExdIICT6Intrinsic safety ExiaIICT6 or ExibIICT6 (Ordinary)
Note: BDP/BGP remote pressure transmitter provides a reliable survey method of which can avoid measured medium direct contacts with isolation •membrane of the transmitter. It applies for the some following condition:
1. When measured medium has corrosion action on transmitter joint and pressure sensing component2. When need to isolate between high-temperature measured medium and transmitter3. There are fixed suspension or highly viscous in the measured medium and easily clogged transmitter4. As change of environmental temperature or flow temperature, measured medium occurs solidification or crystallization.5. Measured medium is changed which need to flush, but not cross mixture6. Must remain hygiene condition (pollution-proof): BDP/BGP type remote pressure transmitter with remote diaphragms has still a variety of characteristics for differential pressure/pressure transmitter. Various type of remoter device on which provides model to users, please look into it while ordering.
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
16M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
Model Explanation
INSTRUTEK -RTW
Hole use for flush1121
NoHave
ABC
316 stainless steelHutchinson C-276Tantalum
Membrane materialfor remote device
Upper bearing is 316 stainless-steel, the install ring is galvanized carbon steel, and the gasket is white asbestos or fluorine rubber.
Upper bearing is 316 stainless-steel, the install ring is 316 stainless- teel, and the gasket is white asbestos or fluorine rubber.
11
21
Structural material
AB
316 stainless steelHutchinson C
Material of lowerbearer
1/4-18” NPT( cone-shaped pipe thread)3/8”NPT1/2-14”NPT1”NPT1 1/2” NPT( not have hole for flush)Special requirement
1112131517Y
Connection hole oflead pressure
INSTRUTEK-RTW21A21A13Option as an Example
Note: If need special material, please contact with our company to customize it.•
Dimension drawing for INSTRUTEK-RTW series thread installation remote transmission device (unit: mm)
Type spectrum table for INSTRUTEK-RFW flange type remote transmission device
Place an order for transmitter from the model specification, choosing the “fill oil” from sheet VI, choosing the capillary from VII.
America stan dard cone - shaped pipe thread flow connection
Nameplate
Capilary connection
Upper bearer
MembraneSealwasher
Connection hole for flush(1/4 - 18 NPT) (Customize)
Instalation ring
Φ 95.3
Φ 51.8
64.544.7
Model Explanation
INSTRUTEK -RFW
1121
NoHave
ABC
316 stainless steelHutchinson C-276Tantalum
Membrane materialof remote device
Spare hole for flush
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
17
Model Explanation
Upper bearing is 316 stainless-steel, the install ring is galvanized carbon steel, and the gasket is white asbestos or fluorine rubber.
Upper bearing is 316 stainless-steel, the install ring is 316 stainless- teel, and the gasket is white asbestos or fluorine rubber.
11
21
Structural material
Code Low set dimension The max working pressure Low set materialA21B21E21A41B41E41A51B51E51A71B71E71A22B22E22A42B42E42A52B52E52A72B72E72
Measure andmaterials of low set
1”
1”1”
1-1 ½”
1-1 ½”1-1 ½”
2”
2”2”
3”
3”3”
1”
1”1”
1-1 ½”
1-1 ½”1-1 ½”
2”
2”2”
3”
3”3”
150Ib
150Ib
150Ib
150Ib
150Ib
150Ib
150Ib
150Ib
150Ib
150Ib
150Ib
150Ib
300Ib
300Ib
300Ib
300Ib
300Ib
300Ib
300Ib
300Ib
300Ib
300Ib
300Ib
300Ib
316 stainless steelHutchinson C-276
Carbon steel316 stainless steel
316 stainless steel
316 stainless steel
316 stainless steel
316 stainless steel
316 stainless steel
316 stainless steel
Hutchinson C-276
Hutchinson C-276
Hutchinson C-276
Hutchinson C-276
Hutchinson C-276
Hutchinson C-276
Hutchinson C-276
Carbon steel
Carbon steel
Carbon steel
Carbon steel
Carbon steel
Carbon steel
Carbon steelExample INSTRUTEK-RFW11A11A51
INSTRUTEK -RFW
NOTE: if need special material, please contact with our company to customize it. The parts of white characters mean special requirement, please consult •when ordering.
INSTRUTEK-RFW series flange remote transmission device table
Norminaldiameter
(inch)
Pressure(class/Mpa)
Diameter ofProtrudingplat form C
Outsidediameter Thickness D Center distance
Between Screw BScrew
quantity nDiameter of
bolt holeDiameterE(mm)
DiameterF(mm)
1”
1 1/2”
2”
3”
66.5
150/2 61 110 14.5 79.5 4 16 25 61
300/5 66.5 125 17.5 89 4 20 25
150/2
150/2
150/2
300/5
300/5
300/5
73
73
92
92
127
127
130
155
150
165
190
210
17.5
17.5
21
20.5
22
27
98.5
114.5
120.5
127.0
152.5
168.5
4
4
4
4
8
8
16
23
20
20
20
22
40
40
50
50
80
80
73
92
127
73
92
127
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
18M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
NOTE: if need special material, please contact with our company to customize it.•
Dimension drawing for INSTRUTEK-PFW series flanged remote transmission device
Dimension drawing for INSTRUTEK-RFW series flange remote transmission device (unit: mm)
Type spectrum table for INSTRUTEK-PFW series tabular type remote transmission device
Connect flange for user flow
Remote flange
User blind flange
The place for connect capillary
23.8
Φ127
A B C
D
E F
4
n- d
Upperset flange
GasketLower set
Hole for flush1/4 - 18 NPT
Model Explanation
INSTRUTEK -PFW
Hole use for flush1121
NoHave
316 stainless steelHutchinson C-276Tantalum
Standard 3´´—150Ib and 300IbAFlange dimenion
Membrane materialfor remote
transmission device
ABC
316SSTAMaterial for remotetramsmission flangeOption as an example INSTRUTEK-PFW11AAA
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
M e a s u r e m e n t + C o n t r o l
since 1927 Industr ial Distr ibutors
19
Type spectrum table for INSTRUTEK-EPW series insert drum type remote transmission device
Model Explanation
INSTRUTEK -EPW
Hole use for flush11
316 stainless steelHutchinson C-276Tantalum
Membrane materialABC
1213
3(Φ66 mm) 316 stainless-steel3”( 66 mm)Hutchinson alloy (custom-buil t)Φ4”( 89 mm) 316 stainless-steelΦ
The length ofinsert drum
204060Y
50mm100mm150mmSpecial requirement
A11A12
Flange specificationThe highest working pressure of 150Ib is 1.89 MPaThe highest working pressure of 300Ib is 4.9 MPa
Option as an example INSTRUTEK-EPW11A20 A11
NOTE: if need special material, please contact with our company to customize it. The parts of white characters mean special requirement, please consult •when ordering.
The diagram for INSTRUTEK-EPW series insert drum type remote transmission device
Type spectrum table for INSTRUTEK remote transmission device filled fluid
NOTE: if need special material, please contact with our company to customize it•
Connect capillary
Flange
Membrane
Bearer
Model Explanation
INSTRUTEK -CAP
The diameter andmaterial of Insert drum
Silicon oil(lower temperature), stable range: -29-149°CC10485-007 Stable range of Iner t liquid: -18-204°CC61734-0001
C1199-0032-0004 Stable range of Iner t liquid: -15-315°C
Cali, Col.: [email protected] / PBX: (57-2) 8823250 / FAX: (57-2) 8816458 / Cra. 1 #18-19 Bogotá D.C, Col.: [email protected] / PBX: (57-1) 2010177 / FAX: (57-1) 2015640 / Cll. 18 #22-66Medellín, Col.: [email protected] / PBX: (57-4) 4448232 / FAX: (57-4) 3015907 / Cll. 49Sur #46-11Barranquilla, Col.: [email protected] / PBX: (57-5) 3531212 / FAX: (57-5) 3688925 - 26 / Cll. 77 #67-37
Type spectrum table for INSTRUTEK-CAP capillary
NOTE: if need special material, please contact with our company to customize it•
Dimension drawing for INSTRUTEK-CAP capillary(unit: mm)
Model Explanation
INSTRUTEK -CAP
13Material dimension Φ1.09 mm, 316 stainless-steel0510152025Y
1.5m3m4.5m6m7.5mSpecial requirement
This length is justfor single sideremoter length
AB
The length of capillary
Terminal accessory ofremote device
1/2 –20UNF-2A screw (without suppor t pipe)1/2 –20UNF-2A screw (with suppor t pipe)
1112
Protect tube coverArmored 304 stainless-steel seriesNot indicate is PVC jacket, armored 304
Option as an example INSTRUTEK-CAP1305A11
114.3
1/2-20UNF-2A
1/2-20UNF-2A
4.8
To connect remote device
Length
Flange Embed
Connect transmitter
Carry supp ort pipe
12.7
Without sup port pipe