iv b.tech i sem, mechanical department, automation and robotics & (9a03702), date of exam...

Upload: purushotham-kumar

Post on 02-Jun-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/11/2019 IV b.tech i Sem, Mechanical Department, Automation and Robotics & (9a03702), Date of Exam 23-09-2014, Facult

    1/3

    MOTHER THERESA INSTITUTE OF ENGINEERING & TECHNOLOGY, PALAMANER - 517408

    BRANCH: MECH IV B.Tech I SEM I MID EXAMINATIONS SEP 2014 EXAM DATE: 23-09-2014

    SUBJECT & Code: Automation and Robotics & (9A03702) Type: DESCRIPTIVE

    Regd. No: Max. Marks: 20

    Answer any Three Question

    All Questions carry equal marks

    1. (a) What is automation? Explain various types of automation

    (b) What are the advantages and disadvantages of Automation?

    2.

    Explain the analysis of two stage transfer lines with storage buffers.

    3.

    Explain the following terms related to line balancing:

    (a) Station time

    (b) Cycle time

    (c) Line efficiency

    (d) Balance delay

    4.

    (a) Explain the concept of Assembly process.

    (b) Define line balancing problem and explain the terminology involved.

    5. Explain about any two assembly line balancing methods.

    NAME OF THE FACULTY: K.NAGI REDDY DEPT: MEC

  • 8/11/2019 IV b.tech i Sem, Mechanical Department, Automation and Robotics & (9a03702), Date of Exam 23-09-2014, Facult

    2/3

    MOTHER THERESA INSTITUTE OF ENGINEERING & TECHNOLOGY, PALAMANER - 517408

    BRANCH:MECH IV B.TECH I SEM I MID EXAMINATIONS SEP 2014 EXAM DATE: 24-9-2014

    SUBJECT & Code: Automation and Robotics & (9A03702) Type: OBJECTIVE

    Regd. No: Max. Marks: 10

    1 The Economic realities of the modern world are [ ]A Globalization B International

    outsourcingC Local outsourcing D All of the above

    2 The number of product variety that can be produced in programmable automation

    are[ ]

    A More B Medium C low D none

    3 Reasons for Automation are [ ]

    A To increase labor

    productivity

    B To reduce labor

    cost

    C To improve

    worker safety

    D all

    4 USA principle means [ ]

    A Understand the

    existing processB Simplify the

    processC Automate the

    processD All of the above

    5 The Manufacturing Industries which fall under Primary sectors are [ ]

    A Agriculture B Forestry C A&B D none

    6 In job shop production the type of layout engaged is [ ]

    A Fixed positionlayout B Process layout C Cellular layout

    D All of the above

    7 In Batch production the quantity of production produced is [ ]

    A High B Medium C Low D none

    8 Basic elements of automation are [ ]

    A Power B Program of

    InstructionsC Control systems D All of the above

    9 The power form used for casting process are [ ]

    A Thermal B Mechanical C electrical D none

    10 Advanced automation functions are [ ]

    A Safety monitoring B Maintenance and

    repair diagnosticsC Error detection

    and recoveryD All of the above

    11 The conditions fulfilling the requirement of Automated Production lines are [ ]

    A High demand B Stable product

    designC long product life

    and multiple

    operations

    D All of the above

  • 8/11/2019 IV b.tech i Sem, Mechanical Department, Automation and Robotics & (9a03702), Date of Exam 23-09-2014, Facult

    3/3

    12 The Storage buffers are used on automated production lines to [ ]

    A Reduce the

    impact of station

    breakdown

    B To provide a bank

    of parts to supply

    the line

    C To provide a

    place to put the

    output of the line

    D All of the above

    13 Reasons for productivity of Manual assembly lines are [ ]

    A Specialization oflabor B Interchangeableparts C Work flowprinciple and line

    pacing

    D all

    14 Which is the best method that can solve the line balancing problem [ ]

    A Largest candidate

    ruleB Kilbridge and

    wester methodC RPW D none

    15 Which type of assembly lines involves in mass production [ ]

    A Single model

    assembly linesB Batch model

    assembly lineC Flexible model

    assembly lineD none

    16 Which type of assembly lines involves in Batch production [ ]

    A Single model

    assembly linesB Batch model

    assembly lineC Flexible model

    assembly lineD none

    17 Which type of assembly lines involves in Job Production [ ]

    A Single model

    assembly linesB Batch model

    assembly lineC Flexible model

    assembly lineD none

    18 How many levels of automation? [ ]

    A 4 B 5 C 6 D 7

    19 Define balance delay? [ ]

    A To measure

    station efficiencyB To measure cycle

    efficiencyC To measure line

    efficiencyD None of the above

    20 Which is the example of assembly process? [ ]

    A Assembly

    systemsB Assembly

    methodsC Joining methods D none