Perfect Video Over IP

Ix1000 IP-MPEG Gateway Product Introduction

Path 1 is a division of IPVN

Copyright 2009 IP Video Networks, Inc.

With the Ix1000

any teleport

is within reach Teleport Interconnects

The Ix1000 is an IP network enabler

for H.264/MPEG-4 services.

Broadcasters and teleports can

interconnect across virtually all IP

networks

Connect content producers

to distribution headends

using the Ix1000 Headend Interconnect

Local broadcasters and service

providers can maintain reliable and

cost-effective connectivity through

any IP network.

Monitor IP Video services

with the Ix1000’s powerful

network metrics Metrics

Loss Period (LP)

measure the total number of lost

consecutive packets

Loss Distance (LD)

measure the time and packet spacing

between losses

Jitter

characterize variable latency of

packet arrival

100

10 1000

Packets/Min Jitter - Max

SMPTE 2022

and ClearPath Pro™

transmission

protocols

Click SMPTE logo to visit store to

purchase SMPTE 2022 standard

Smart Packet Interleaving The Ix1000 maintains a near-perfect

constant bit-rate output, eliminating

common bandwidth throttling and

burst error problems.

Enhanced Burst Loss The ClearPath enabled Ix1000

provides an enhanced tolerance to

large packet loss, which may occur in

Internet and multiple IP network

services.

Firewall Friendly The ClearPath protocol supports

single UDP transmission for FEC

and Program data.

RepliCast™ or Multicast

programs to many receivers RepliCast If multiple receivers are connected

through different providers,

multicast will not work. An Ix1000

can send any of its 24 programs to

32 unicast destinations.

Multicast In private IP networks, a single

transmitter can efficiently deliver a

perfect video program to any

authorized subscribing receivers.

Rx

The Scenario A broadcaster in the UK must reach

a teleport in India with 4

(24/7)programs, and would like to

use a local Internet service provider.

The 4 programs will go across

several IP networks.

The Indian teleport must manage

the entire service from the teleport

and optimize latency and bandwidth.

Teleport Interconnect – an Ix1000

configuration example

P1

P2

P3

P4

P1

P2

P3

P4

Tx

Internet Enabled IP-MPEG v

IP

Basic Setup Process – Tx unit 1.Configure IP:UDP inputs {P1-

P4}from MPEG encoder

2.Provide the transmitting unit with

IP:UDP outputs to destination Rx

unit

3.Enable connections, selecting a

suitable SMPTE 2022 or ClearPath

Pro FEC scheme for bandwidth,

latency and loss protection

4.Transmission begins

Teleport Interconnect – An Ix1000

configuration example

P1

P2

P3

P4

Tx

Inputs

1

192.168.1.1:22100

192.168.1.2:22100

192.168.1.3:22100

192.168.1.4:22100

Outputs

2

64.10.200.46:22100

64.10.200.46:22104

64.10.200.46:22108

64.10.200.46:22112

Connections

3

FEC (L), (D)

FEC (L), (D)

FEC (L), (D)

FEC (L), (D)

Basic Setup Process - Rx 1.Configure IP:UDP inputs {P1-

P4}from Ix1000 Tx unit, including

jitter tolerance

2.Provide IP:UDP outputs to

destination decoders/receivers

3.Enable connections, selecting FEC

decoding for each program

4.Output begins and flows are monitored

Teleport Interconnect – An Ix1000

configuration example

10.1.1.1:22100

10.1.1.2:22100

10.1.1.3:22100

10.1.1.4:22100

Outputs

2 Inputs

1

64.10.200.46:22100

64.10.200.46:22104

64.10.200.46:22108

64.10.200.46:22112

Connections

3

FEC - enabled

FEC - enabled

FEC - enabled

FEC - enabled Rx

P1

P2

P3

P4

Internet Enabled IP-MPEG

v Rx

The Scenario A broadcaster in the UK must reach

a teleport in India with 4

(24/7)programs, and would like to

use a local network provider.

The 4 programs will go across

several IP networks.

The Indian teleport must manage

the entire service from the teleport

and optimize latency and bandwidth.

Teleport Interconnect – an Ix1000

configuration example

P1

P2

P3

P4

P1

P2

P3

P4

Tx

Internet Enabled IP-MPEG

Options on an Ix1000

Considerations • How many Ix1000s are

required? (up to 24 programs in

a single Ix)

• How many unique programs

will the transmit and receive

units process?

• How many sites will my

programs go to? Is multicast

available or will RepliCast be

required?

Replicast

5, 10 or 30 unicast destinations

Ports

1 to 24 total unique programs. an

input:output constitutes a “port”

Options on an Ix1000 cont.

Considerations • How many Ix1000s are

required? (up to 24 programs in

a single Ix)

• How many unique programs

will the transmit and receive

units process?

• How many sites will my

programs go to? Is multicast

available or will RepliCast be

required?

1 MPEG-TS, 3 Receivers

(3) 1 port units, Replicast 0

(1) 1 port unit, Replicast 5

Contact Us

Thank You

sales@path1.com

1-(858)-366-4391