MAHARANA PRATAP UNIVERSITY OF AGRICULTURE & TEGHNOLOGY, UDAIPUR (RAJ.)
Name of Work :- Fire Protection work at University Auditorium , Udaipur.
G - Schedule Part (A) (Based on Electrical BSR-2021 ( PWD Rajasthan)
Approved makes Group Classification
Item : Electrical Driven Fire Pump, Jockey Pump, Terrace pump, Dewatering pump
Mather & Platt ( Willo ) Kirloskar, Beacon, Grundfos, tTT
Item : Electrical Driven Fire Pump's motor
ABB, KEC, CGL, Bharat Bijlee, Grundfos
Item : Diesel Engine for fire pump
Cummins, Greaves, KO[:L
Item : MS / Gt pipes
Item : Pipe Coat Material
Pypkote, Makphalt, Safr-'x, mlote
Item : Sluice / Butterfly / Non return / Ball valves
Audco , Advance , Zoloto , Kirloskar , lntervalve, Leader, Cim
Item i Fire hydrant valves / Short branch pipe / FB Withdrawl & lnlet
Newage, Ceasefire, Vij;ay, Minimax, Eversafe , peter autokit , padmini
Item : Fire hose pipes / First aid fire hose reel / Fireman's Axe
Newage, Ceasefire, Jayshree, Ushafire, Safex, Eversafe, Jyoti
Item : Sprinkler heads
Tyco, Eversafe, Reliabler, Spraysafe, Viking
Item : Addressable type Detectors / FACP / Hooters / Pull station / Speaker I DVC lModules Notifier, Simplex, Johnson control, Cooper, Fike, Esser, Bosch
Item : Conventional type FACp/Hooters / MCp / R I
Bentel, System sensor, Agni, Cooper, GST, Ravel, Fike, Essar, Honeywell, Bosch
Item : Conventional type Heat / Smoke Detectors
Apollo, System sensor, Cooper, GST, Rafiki, Essar, Honeywell, Bosch
Item : Fire Extinguishers
Item: PASystem
Supplying, lnstallation, furtingffi govt./ state govt. authorised Fire authority approved Electr Driven Main fire pump for Sprinkler / Hydrant
suitable for automatic operation and following details given as A, B, C, D, E,F,G and H.
(A) Horizontar singre / Murti rta@ out type pump complete for delivery of
,rncluding bypass arrangement for Testing of (B) Material of construction@
Shaft - SS 410, packing - Mechanical Seal shall becapableoffi
rated capacity at a head not ress than 65 % of the rated head. The shut off head shall not exceed .J,20% of rated head (D) Squirrel cage induction motor suitable fft ph*"/15 V, 50 HZ, Ac supply 2900 I 1450 RpM T.E.F.C confirming to tp;55 , of required HP suitable for the above pump ,along with
( E) Common bed plate nstallation of pump and Motor
Pump is to be inspected by third prrty tiGTn6lToit- manufacturer's premises and inspection report is to
Suitable cement concreat tornOation-1t,:,0]-E[
In, Au as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer
LPM suitable for 70 Mtr Head, single stage, 2900 RpM
Supplying, Installation, Testing & Cm state govt. authorised fire authority approved Diesel
Engine driven pump suitable for automatic operation per discharge defined beolw consisting of the
Horizontat Singte / Mutti stage cuntritrg-t rndiifoi, Ei.I out type pump complete for delivery of below
(B) Material of constructio;@ Bronze, Shaft - SS 410, packing _ Mechanical Seal
(C)Pump shall be capable of trffi rated capacity at a head not less than 65 % of the rated head,
Code No. Description
Unit atv Complete
Complete Rate
Amount
(D) Radiator cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1500 / 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate
for mounting of the Engine and Pump,Antivibration damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically if the Normal electrical supply fails with a unit of battery bank of !2/24v,L80 Ah, Lead
Acid Battery with Boost / Trickle charger as required for operation of Diesel engine, Exhaust Pipe of suitable diameter
minimum 10 M length, with muffler, day oil tank of 300 1ts
capacity with first charge and hand operated oil pumping set,
(E) Pump is to be inspected by third party like RITES / PDIL at
manufacturer's premises and inspection report is to be sr rhmittpd (F) Suitable cement concreat foundation (1:3:6) duly plastered with (1.:4) ratio (G). First filling of the fuel tank shall be done by contractor and the prevailing fuel cost at that time shall be reimbursed to the contactor bv department. Appropriate OEM/ NABL lab test reports shall be submitted. All
as per pre approved by Engineer in charge. For
additional technical parameters of products/ work , refer Annpxrrre "A'r attarhcd with this RSR
a 2280 LPM suitable for i'0 Mtr Head, single stage, 1800 RPM Each 1.00 538455.00 5384ss.00
3 Supplying, lnstallation, Testing & Commissioning of central govt./ state govt. authorised fire authority approved Horizontal
single stage Jockey pump with Cl Body, Bronze impellor, SS
shaft, mechanical seal coupled with Squirrel cage induction
motor should be lE2 class as per IEC 60034- 2-1: 2007, IEC
60034-30: 2008, & 1S12615:2011 for automatic operation
suitable for three phase, 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM ,T.E.F.C type confirming to lP:55 with flexible coupling and coupling guard with the pump
,Common bed plate fabricated from mild steel channel
Suitable cement concreat foundation duly plastered with anti vibration pads.complete in all respect. Appropriate OEM/ NABL lab test reports shall be submitted. All as per
pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
a 180 LPM suitable for 70 Mtr Each 1.00 88712.00 887L2.00
4 Supplying, lnstallation, Testing & Commissioning of pressure
switchesfor Main, Jockey, Terrace pump and standby Diesel
pumps, including necessary control wiring From pressure
switch upto control panel and Ball valve complete in all respect.
All as per pre approved by Engineer in charge. For additional
technical parameters of products/ work , refer Annexure "A"
Each 6.00 1978.00 11868.00
Complete
5 Providing & fixing 100mm dia bourden type, Stainless steel
dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 " BSP bottom entry on Pump Delivery Line complete with Ball valve complete
in all respect. All as per pre approved by Engineer in
charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Each 6.00 825.00 4950.00
6 Providing & fixing vane type water flow switches with contacts for installation in 50 mm to 150 mm dia M.S. pipe for a
service pressure up to 20 Kg / Sq.cm complete in all respect.
All as per pre approved by Engineer in charge. For
additional technical parameters of products/ work , refer Annovr rra rrA'r et'trrharl rrrith thic Q.(Q
Egch 5.00 47t2.00 23560.00
7 Suppfying, lnstallation, Testing & Commissioning of floor mounted dust and vermin proof compartmeptalised cubical
type main fire pump control panel made out of CRCA sheet
, required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on
both side of panel in desired shade The panel having PU/
Neoprene rubber gasket of not less than 3mm thickness ,
separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0
mm above 600 mm. Load bearing structure shall be of 2.0
mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors and having accessories/ switch gear (as per Specf Ch-06 & 08) as below:- complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
1.00 185129.00 186129.00
lncomer
400 Amp. TPN MCCB (adj.O/L) with Extended ROM, 36 kA, with Thermal magnetic release, Analouge Ammeter, Voltmeter, Selector switches,CT,
lndicating Lamps, 500 Amps FP Alum. Bus bar with with heat shrinkable sleeves. Out eoins (a) 200 Amp. TPN MCCB(adj,O/L) with Extended ROM, 35 kA,
with Thermal magnetic release, Digital Ammeter, Voltmeter, Selector switches,CT, lndicating Lamps for 'ON', 'OFF', 'TRIP' 1
no. star Delta Starter of 75 HP with thermal over load relay,
timer, push buttons, Auto / Manual selector switch, Single ohase oreventor - lSets (b) 63 Amp. TPN MCCB (adj.O/L) with Extended ROM, 25 kA,
with Thermal magnetic release, Digital Ammeter, Voltmeter, Selector switches, CT, lndicating Lamps for 'ON', 'OFF', 'TRIP' I no. Star Delta / DOL Starter of 5 - 15 HP with thermal over load
relay, timer, push buttons, Auto / Manual selector switch, Single phase preventor -1 Set
Code No. lDescription
llndicatin8 lamp for High / Low Lub. Oil pressure, High water
temperature and engine ON indication, Battery charger, suitable for 72 v / zq v DC with trickre / boost serectoiswitch, Dcl ammeter & voltmeter I
Unit Qtv Complete
.llrv, Jy'(Eil! LUilrruiler [o control Uperation Main Electric pumps, Diesel pump, jockey pump in sequence as per specs. consistingof relays, timers, sensors, annuciation window for fault indication. (e,Approp.are I est Certificate/ report of product/ accessories from oEM/panel Manufecturer shail be submitted.
8 ,,vv,s,,,6, rr^rrE, JUrnunt, lesung & commissioping of Heav, duty MS C class pipes conforming to lS 3S8g / 1239 part_l fo hydrent and sprinkler applications including cutting, screwing welding etc & malleable iron fittings like elbows, tees flanges, tapers, reducer, with compressed asbestos gasket: etc. fixing the pipe on the wall/ceiling with suitable clamps langer and, nuts bolts as per appr:oved spacing. complete witl" rainting of one coats of Red Oxide and two. or more coats 01 ;ynthetic enamel paint of post office red shade complete as'equired.Complete installtion shall be pressure tested al L4kg/sqcm for 24 hr as per practice complete in all respect. \ppropriate Test Certificate/ report of product/accessories rom OEM shall be submitted. All as per pre approved ry Engineer in charge. For additionar technicar parameters of troducts/ work , refer Annexure ,'A,' attached with this BSR .
a die
c
Mtr. 140.00 736.00 103040.00f
ruu rnm ota
h Mtr. 80.00 1855.00 148400.00
I 200 mm dia, 6.0 mm thick Mtr. 18.00 2s60.00 46080.00
2S
1..._,,",,:", , ,^,,,6, JvrilLril6,, l esung 6r Lommissionlng of Heav
l:uty MS C ctass pipes conforming to lS 3589 / 1239 part_t fo
lhydrent and sprinkler applications underground rings includin
lcutting, screwing, welding etc & malleable iron fittings lik
f elbows, tees, flanges, tapers, reducer with compressed asbesto
lgaskets, nuts, bolts etc. including laying of pipe in excavte(
ll:.n.h. of 1.0 mtr depth with cleaning,wrapping and coating o
Ithe pipe with 4 mm thick tar based polymaric corrosior
lprotection tape including applying uniform coat of cold pipeko
lprrmer as per lS; 10227 for protection agains.
lcorrsion.complete in all respect. (Excavtion of trench shalbe paid extra as per ltem no E130500 ). Complete installtion shall be pressure tested at 14kg/sqcm tor 24 hras per practice complete in all respect.Appropriate Tesl Certificate/ report of product/accessories from . OEM shallbe submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/,work ,;
RO mm rl;,a
b 150 mm dia Mtr. 60.00 1020.00 61200.00 Mtr. 280.00 21,74.00 591920.0010
11
lwelded construction for pump room made of 450 mm
ldia,fabricated out of 10 mm thick dished ends and 8 mm
Ithick MS sheet, 2000 mm in height with air release valve
f on top and flanged connection to riser, drain arraneement
lwith 25 mm dia drain valve,air release valve,safetf, ualvel
lpressure gauge with required accessories and painting withl
Itwo coats of Red Oxide and two coat of post office red enamell
ll.,l:.rt required complete in all respect. Appropriate Testl
lCertificate/ report of product/accessories from OEM shalll
lbe submitted. All as per pre approved by fngineer inl
lcharge. For additional technical parameters of products/ *ort ,l
lreter Annexure "A,' attached with this BSR .
Il_l lSupplying.nA f
lwelded construction fixed at riser top made of 250 mm dia.l lfabricated out of 8 mm thick MS sheet, 1200 mm in heiehil
lwith air release valve on top and flanged connection tol 'riser, drain arrangement with 25 mm dia drain varve.rereasel valve,safety valve pressure gauge with requirei;;..#;l and painting with two coats of Red Oxide and two coat of oostl office red enamel paint as required complete in all respect. Alll as per pre approved by Engineer in charge. For additionarl technical parameters of products/ work , r."i"r. Onn"rr;; ,;;;l attached with this BSR . I
Each 1.00 20452.00 20452.00
Each 1.00 7862.00 7862.00
72 lJutrtlyrng ano htxtng ot y type strainer fabricated out of cast
liron/ steel body, strainer shall have 1.6 mm. thick stainless steel sheet perforated screen with 3 mm. dia holes with flange at both ends complete with nuts, bolts, washers, gaskets etc of following sizes. complete in all respect. Appropriate Test Certificate/ report of product/accessories from oEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
a 150 mm dia Each 2.00 9037.00 18074.00
Code No. Description Unit Qtv
Complete
Rate Amount
13 Providing and constructing masonry cnarnOer 90 x 90 x 100 cms inside with brick work in cement mortar 1:5 (j.cement : Sfine sand) for water meter ,M.S. cover (6mmthick sheet with locking arrangement, 600 x600 with M,S. frame etc. all epoxy coated and R.C.C. top slab 1:2:4 mix(l Cement : 2 coarsesand : 4 graded stone aggregate 20mm nominalsize) including necessary excavation, back filling foundation concrete 1:5:10 mix (1 cement : 5 fine sand and 10 graded stone aggregate 20mmnominal size) leaving al pocket of 30x30 cmwith out concrete and filled withl pebbles andinside plastering with cement mortar l:4 (11
cement : 4 coarse sand) 12 mm thick finishedwith a floatinel coat of neat cement and outside plaster finished rouehl complete in all respect. All as per pre approved by Engineer inl charge. For additional ,technical parameters .of products/l work , refer Annexure ,,A,' attached with this BSR .
I I
Each 1.00 14598.00 14598.00
L4 Supply, installation, testing and commissioning of du;l plate .on return valve (PN-16) of following sizes confirming to lS:5312 -7975 complete with flanges,rubber gasket, nut,bolts, washers etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure ',A" attached with this BSR .
a 80 mm dia Each 1.00 5429.00 5429.00 b 100 mm dia Each 1.00 6937.00 6937.00 c 150 mm dia Each 5.00 9922.00 49610.00
15 Supplying, fixing, testing commissioning of Uutterity ,alve (pN 16) with Bronze/ Gunmetal seat duly lSl marked conforming to lS 13095-1991 complete with flanges,Nuts, Bolts, washers, gaskets of following sizes as required complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure ',A" attached with this BSR ,
a 50 mm dia Each 2.00 2176.00 4232.00 b 65 mm dla Each 3.00 2296.00 6888.00 c 80 mm dia Each 12.00 2551.00 30612.00 d 100 mm dia Each 6.00 3543.00 21258.00 e 150 mm dia Each 8.00 4904.00 39232.00
16 Providing, installation, testing and commissioning of Tra; ball valves (PN-16) duly tSt marked confirming to tS : 9g90- 1981 complete with flanges,Nuts, Bolts, washers, gaskets etc of following sizes as required complete in all respect. Appropriate Test Certificate/ report ofproduct/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure ,,A,' attached with this BSR
q 125 mm dia. Each 10.00 656.00 6560.00
Code No. Description Unit Qtv
Complete Rate
Amount
17 Providing & fixing testing & commissioning of installation control valve of cast iron body and brass/bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continous alarm when the wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. of size 150 mm dia as required complete in all respect. Appropriate Test Certificate/, report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annpxrrre "A" atterhcd with this RSR ]
Each 1.00 35758.00 35758.00
18 Providing, Fixing, Testing & Commissioni4g of single headed obligue pattern hydrant landing valve (intqrnal/e11ernal) tSl
marked confirming to t5:5290-1983, (Type A) /tS;, 90S, - 1975 with 80 mm dia flanged inlet & 63 mm dia instantaneous type female outlet coupling with cast iron wheel complete with cap and chain, twist relFqse . type pluC en$, , ?ll qccessories complete in all respect. Appropriate Test Certificate/ report of produc/accessories from. OEM shall be submitled.All ds per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure ,1A,, attached with this BSR .
a Stainless Steel (SS 3L6) rnaterial Each 16.00 s339.00 85424.00 19 Supplying and fixing orifice plate made of 6 mm thick
stainless steel with orifice of required size in between flange & landing valve of external and internal hydrant to reduce pressure to working pressure of3.5 kg/cm2 complete with rubber gasket, Gl bolts, nuts, washers etc. as required complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For: additional technical parameters of products/ work , refer Annexure 'fA" attached with this BSR
Each 16.00 1051.00 16816.00
20 Supplying and fixing of Non-percolating flexible hose (RRL
type-A) lSl marked confirming to 15:635, 63 mm dia, 15 mtr. Long RRL hose pipe with instanteneous type G3 mm dia male and female couplings (Confirming to tS:903) duly bound and riveted to hose pipes with copper rivets and copper wire etc. as required complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A,, attached with this BSR .
a With Stanless steel Coupling Each 32.00 4228.00 135296.00
Code No. Description Unit Qtv
Complete Rate
Amount
21, lSupplying & fixing Sf,ort Arim lconforming to lS: 903, made of following material , fitted
lwith 20mm (nominal internal diameter) bore nozzle, for
lRrojecting water in form of solid jet. The Branch shall have
l63mm Male lnstantaneous lnlet, suitable for use with 63 mm
lsize Fire fighting hoses. H,p, tested to 21 kgf/cm2 for 2.5 minutes complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charee.i For additional technical parameters of products/ *ork , ,"i"rl Annexure "A" attached with this BSR . I
a ()5 JLO' rnatenal Each 16.00 1.792.OO 28672.0022 supptying and fixing first -Aid rire ffi swinging type with MS construction spray painted in post office Red, conforming to lS gg4-1995 with u.pto date amendments, complete with the following as required. (A) 30 rn long 20 mm (nominal internal) dia water hose .
(B) 20 nnm (nominal. internal) diar gun metal globe valve,& nozzle 5mm orifice (C) Drum and brackets for fixing the equipments on wall. (D) Connections from riser with 25 mm dia stop valve (gun metal) & M.S. pipe complete in all respect. Appropriate Iest Certificate/ report of product/accessories from OEM] shall be submitted. All as per pre approved by fngineer inl :harge. For additional technical parameters of products/l ,vork , refer Annexure ,'A,, attached with this BSR . I
a rgn Hressure tsratcled Rubber Hose as per lS:5132 _ 1969 Each 16.00 9423.OO 1s0768.00 23
lJuppryrilB crnu rlxtng Ftre tsngade ln let connection of cl body
with Gun Metar/stainress steer mare instantaneous inret couplings complete with pVC blank cap and chain as required for 150mm dia MS pipe connection, conforming to lS 903 as required of following way :_ complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All asper pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure ,,A',
attached with this BSR .
Each 1.00 9020.00 9020.00 24
lrruvrurnE ano rtxtng ot Gun Metal/stainless steel Fire
lbrigade Suction hose coupling (draw out connection) with
lnut for female coupling as per tS:902_1974 complete with 100mm dia valve, complete with nut bolts and rubber insertion complete as required complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted,All as per pre approved bvl Engineer in charge. For additional technical prrrr"t.r, ofl products/ work , refer Annexure ',A,' attached with this BSR .l
Each 1.00 7702.00 71,02.0O
sheet with 6 mm thick glazed glass doors including
Jnecessary locking arrangement suitable to accommodate
lexternal hydrant with butterfly valve, 2 Nos 15 Mtr. Long Hose
lnipe, f No. branch pipe, mounted on wall duly painted with
post office red externally and white internally with synthetic enamel paint complete in all resoect. for internal/external hydrant complete as requireO. ]
Appropriate Test Certificate/ report of product/accessoriesl from OEM shall be submitted. All as per pre approved bvl Engineer in charge. For additional technical prr.r","r, oil products/ work , refer Annexure ,,A,' attached with this BSR . I
Unit Qty Complete
a buu mm )i 250 mm Each 16.00 5249.00 83984.00
26 lProvidinC,
fixing, testing & quartzoid bulb type sprinkler heads suitable for 6g degree centigrade rating standard response ,(U|_/FM/L1C/TAC
Listed/Approved) chrome prated comprete in arr respect of the following type complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . I
a Pendant/ Upright type Each 500.00 21,7.00 108s00.00b Extended Throw Sidewall tvoe Each 25.00 315.00 787s.00 27 rrovtotng & rtxtng 10 SWG chrome plated brass 100 mm dia
decorative flanges / escutcheon plates fixed at junction of Sprinkler piping with the false ceiling.
Each 250.00 57.00 1,4250.00
28 Supply & Fixing of Fire Man,s Axe ;,th .*ffi;."| h".d & rubber moulde handel and confirming to lS :926 with length approx 0.4 M & weight 3.0 Kg. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Each 16.00 697.00 11152.00
29 supply and Fixing of staintu@ Made of Corrugated Stainless Steel, Rated pressure 200psi -Assembly complete with: lnlet nipple with 1,, NpT male thread, outlet reducer with 1/2. NpT female thread to sprinkler head, 700mm Square Bar, Centre Clamp & 2 Nos side brackets. complete as required complete in all respect. Appropriate Test Certificate/ report of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of] products/ work , refer Annexure ',A', attached with this BSR .l
a uu mm Long Each 100.00 899.00 89900.00
Code No. Description Unit Qtv
Complete
laddressable Multi criteria (two optical/Smoke sensor to
lreduce false alarm ) type photo smoke detector with
lmounting base & LED etc including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&p etc. as required complete in all respect. All as p", pre] approved by Engineer in charge. For additional technicall parameters of products/ work , refer Annexure',A,, attachedl with this BsR . I
a with inbuilt isolator or with isolator base Each 200.00 3071.00 614200.00 31 SITC of lP40 Analouge Addressable typu ff eat Detectors
(ThermalDetectors): GRADE-t with solid state design with sensing element combination of fixed type and rate of rise of temperature mounting base & LED shall have UL 10th edition / EN54 VDS approved certification etc including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&p etc. as required complete in all respect, All as per pre approved by Engineer in charge. Forl additional technical parameters of products/. work , referl Annexure "A" attached with this BSR . I
a rvith inbuilt isolator or with isolator base Each 10.00 2866.00 28660.00 32
lSupply installation testing unO .orriSSoning of tp 40 Beam
ldetector along with Addressable interface module having a
lcoverage area with a distance of min. 10 m and max. L00 m,
Operating temperature range: - 20 C to +55 C, Response sensitivity of 40% , shalr have uL/EN54 certification including transmitter and receiver unit with mounting base & LED etc including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&p etc. as required complete in alll respect. All as per pre approved by Engineer in charge. Forl additional technical parameters of products/ work , referl Annexure "A" attached with this BSR . I
Each 1.00 54031.00 54031.00
33 lSupply, tnstallation, f"tting@ lAddressable (MCp) Manuat Break Gtass/ flap Unit
l(Double action) shall have UL/EN54 certification shalt be constructed of Lexan with clearly visible operating instructions provided on the cover. The word FIRE should appear on the front of the stations in raised letters, including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&p] etc. as required complete in all respect. All as per pre approvedl by Engineer in charge. For additional technical parameters ofl products/ work , refer Annexure ,,A', attached with this BSR . I
a with inbuilt isolator or with isolator module Each 20.00 3140.00 62800.00 34 Supply, lnstallation, Testing and Commissionin[ of *anO
alone Loop Powered Addressable strobe lisht Shall have EN54 /UL Certification.including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&p etc, as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure ,,A', attached with this BSR .
a with inbuilt isolator or with isolator module Each 20.00 2209.00 44180.00
Code No. Description Unit Qtv
Complete Rate
35 SITC of Response lndicator for addressable type detectors as
required complete in all respect. All as per pre approved by
Engineer in charge. For additlonal technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Each 30.00 593.00 17790.00
36 Supply, lnstallation, Testing and Commissioning of Microprocessor based inteligent, Analogue addressable fire alarm panel with CPU redredundancy & min 640 charactor/ 5" touch screen display , shall have UL 10th edition / EN54
VDS approved certification, modular, expandable networkable loop Fire Alarm Control Panel with each loop capacity of min 125 detectors per loop with total of 250 detectors & devices with Loop length up to 1.5 KM. Minimum 5000 history event facility Panel shall be Compatible for Seamless
integration with PA system and both system should be of the same make. The panel shall have 230 + 5 % volts power
supply, Automatic battery charger.24V, sealed lead.acid maintanence free battries sufficient for 24 hours normal working and then be capable of operating the system for 30 minutes during emergency condtion. Loop interface cards, communication module, inbuilt networking port (both RS485 & Ethernet),Serial port for printer, two supervisory inputs,two position key switch and
USB port for programming. including the cost of all
accessories,connecting wires,fixing arrangement, Labour, T&P
etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
a 2 - Loop Each 1.00 199648.00 199648.00 37 Supply, lnstallation, Testing and Commissioning Active Repeater
Panel for Fire Alarm System with UL/EN54
certification with inbuilt networking port (both RS485 & Ethernet),Serial port for printer,two supervisory inputs,two position key switch and USB port for programming. The Repeater Panel shall allow users to acknowledge, reset,silence, program, view hisory events.etc (All functions similar to main panel)The user interface of the repeater panel shall be same as the Main Controller with menu driven user interface with smart search.including the cost of all accessories,connecting wires,fixing arrangement, Labour, T&P etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Each 1.00 6553 1.00 65531.00
Code No. Description Unit Qtv
Complete
lCertified tPbased pA controller capable of adding 12 ZONE and
lexpandable upto 50 zones with full digital functionality same
with FACP OEM, it shall contain lZ speaker line outputs. 5000 fault warning and event conditions log. Built in message manager for 60 emergency/ business calls up to 60 minutes. lt also contains EN-54 certified Call Station with extension keypad to serve minimum 12 zones, gooseneck microphone with supervised electret microphone, integrated loudspeaker for system sounds, customizable function and speed dial buttons. possible to use keys (push] buttons) for Zone select, source select, level control,
"."rg"n.ylon/off , message on/off , failure acknowledge/reset. Calll Station is completely supervised by system controller. powerl Amplifier of 480 W in a 3U high housing with 70 V / 1001 V and 8 ohm outputs,Dual inputs with prioritVl switching,100 V input for slave operation on 100 V speakerl line, Mains, battery back-up, including the cost of alll accessories,connecting wires,fixing arrangement, Labour, T&pl etc. as required complete in all respect.OEM appropriate testl :ertificate shall be submitted. All as per pre approved byl Engineer in charge. For additional technical parameters ofl rroducts/ work , refer Annexure ,'A" attached with this BSR .l
I
Each 1.00 332396.00 332396.00
39 SITC 6 watt Speaker mounted in M S sheet box with perforated front mesh for PA and Emergency System complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A,' attached with this BSR .
Each 80.00 792.00 63360.00
40 lsuppty and instailation *@ lbased fire extinguisher Stored pressure type EN pED
lApproved and CE marked conforming to current and valid BIS
lcertification tS 15683:2018 suitable for A class of fires
lComnlete with delivery hose, squeeze grip release valve,
llockinS arrangement, pressure gauge Extinguisher should
lbe pressurized using high grade Dry Nitrogen as per lS 1747
standard. OEM declaration should be submitted. Serial no. and date of manufacturing should be embossed or printed on the body of the fire extinguisher.The firm should submit the product] certificate from an EN notified body & product performancel test report from NABL accredited Lab as per tS 15633.. Alll as per pre approved by Engineer in charge. For additionall technical parameters of products/ work , refer Annexure ,,A,,1
atte.hpd wirh rhi< RsR I a Lapactry - b Ltrs. Each 15.00 2803.00 42045.00
Code No. Description Unit Qtv
Complete
Rate Amount
47 lSupply
& Fixing of current and valid BtS certification S 115683:2018 approved portable fire Extinguisher, Carbon_
ldioxide type flat base including valve, discharge hose of
Inot less than 10 mm dia, min, 600 mm long & complete in
lall respects including initial fill with C02 gas confirming to
ItS:aOz-fSOO filled to a filling ratio of not more than 0.G67
and wall suspension bracket bidder must have valid PESO license to refill and store compressed gas cylinders as per Gas Cylinder rules 2004 , vessel should be pESO Approved. carbon dioxide gas shall conform to lS 15222 with latest amendment. CoZ Cylinder shall be conform to all the requirement given in lS 7285:2004. Serial no. and date of manufacturing should be embossed or printed on the body of the fire extinguisher. The,firm .should submit the product certificatefrom an. EN notified body & product,performance test report from NABL accredited Lab as perls 156g3, . All as per pre approved by Engineer in charge.. For,additional technical parameters of products/ work , refer Annexure "A,, attached with this BSR . I
a Capacity 3.0 Kg. Each 12.00 8790.00 105480.00
42 lsupply
& Fixing of ABC rvpeffi lExtinguisher
(Stored pressure type) of following capacity duly current and valid BIS certification conforming to lS: 15693:2006, with Dry chemical powder used as extinguishing agent should be Mono Ammonium phosphate SO% concentration conforming to lS 14609:1999. OEM will produce supplier certificate complete with squeeze grip release valve, locking arrangement, pressure gauge and bracket including initial fill and wall suspension complete in all respect. Serial no. and date of manufacturing should be embossed or printed on the body of the fire extinguisher. The firm should submit the product certificate from an EN notified body & product performance test report from NABL accredited Lab as per lS
15683. . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . ]
a 2kg Each s.00 2919.00 14595.00 b !lc Each 15.00 4920.00 73800.00
Code No. Description Unit Qty
Complete Rate
2878 Fire Extinguisher, Trolley mounted, CO2 (gas pressure)
type capacity 22.5 Kg. with gun-metal cap.delivery hose horn, trolley, handle, wheel type release valve, locking arrangement complete in all respect. bidder must have valid PESO
license to refill and store compressed gas cylinders as
per Gas Cylinder rules 2OO4 , vessel should be PESO
Approved. carbon dioxide gas shall conform to lS 15222 with latest amendment. Co2 Cylinder shall be conform to all the requirement given in lS 7285:2QQ4. Serial no. and date of manufacturing should be embossed or printed on the body of the fire extinguisher. The firm should submit the product certificate from an EN notified body & product performance test report from NABL accredited Lab as per lS 15583. . All as per pre approved by Engineer in charge. For
additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
Each 1.00 2295s.00 22955.00
44 Providing, Fixing, of Photo luminescent Self charge EXIT Sign
boards of approximate size 12" x 6" The colour combination and
letter size shall be in accordance with lS: 9457-1980, lS:
12349-1988. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR
Each 10.00 963.00 9630.00
sprinkler with provision of required no. of zone (30
ional spares ), each sprinklar hydrant will have atleast 2
on each floor, the panel shall have indication of inkler, zone fault, fire / fault hooter, alarm cancel for fire
'ault, battery for emergency back up of 4 hrs.
C of Hooter suitable for addressable type fire alarm system
with storb light with minimum 85 db audiable etc. as required.
H-Schedule
Rates, Units and Nomenclature in'G'schedule is checked by me and found correct as per Electrical BSR 2021 ( PWO Rajasthan)
@ (ln figure ) . . ...% above/below, (ln words)
as per G" Schedule (F,art A)
I / We hereby tender for the above work as per "H" Schedule (Part B) as rates mentioned above.
JEN (El
v ESTATEdFFICER