j n engineering catalog
TRANSCRIPT
J N ENGINEERING
D1 Block Plot no.12/8 MIDC, Chinchwad, Pune411019
+91 2030623397/96
www.jneindia.in
....Excellence and innovation
NORMAL CUTTING MACHINEJN-700
Application:
Specification:
Cutting power Rubber sheet width Cutting Length Rubber Sheet thickness Cutting length AccuracyInput & Output Tray: Machine Dimensions ( W )* (D)* (H)Machine Weight Main Supply
Features:
Cut length adjustment is simple, from 0-90 mm, precise cutting with easyoperation. Saves time.
Adjusts length of the rubber strip mechanically.
1 hp750 mm width (max)min 1 to 90 mm.15 mm (max)0.1 mmStainless steel material1010*980*1100400 kg.415 Vac, 50Hz, 3Ph.
SERVO CUTTING MACHINEJN-700S
Adjusts the length & weight of the strip at a click of the button on the weighingscale.
Application
Specification
Features
Cut length adjustment is very simple by change value on HMI, from 0-999 mm, precise cutting with easy operation.Saves time & efforts.
Cutting Power Feeding Power Rubber sheet width Cut Range Length Min Rubber sheet thickness Control System Interface Weighing Scale resolution Password protection Weighing adjustment accuracy Cutting width accuracy Input & Output tray Machine Dimensions ( W )* (D)* (H)Machine Weight Mold memory
1 hp1 hp750 mm max 0 to 999 mmmax 15 mmPLC & Servo controlHMI0.1 gm with RS232 interface.Available+/-1 gm0.1 mmStainless steel material1010*980*1600450 kg.Available- 15 molds
SERVO CUTTING MACHINEJN-1000S
Application:
Features:
Specification:
Cutting PowerFeeding PowerRubber Sheet WidthCut Range LengthRubber Sheet ThicknessControl SystemInterfaceWeighing Scale resolutionData Logging & Operator MonitorPassword ProtectionWeight Adjustment Accuracy Cutting Width AccuracyInput & Output TrayMachine Dimensions( W )* (D)*(H)Machine Weight Main Supply
Cut length adjustment is very simple by change value on HMI from 0-1000 mm,precisely cutting with easy operation.Saves time & efforts.
Adjust the length & weight of the strip at a click of the button on the weighingscale.
1 hp1 hpmax 1000 mm. max 0 to 999 mm.max 15 mm.PLC & Servo controlHMI0.1 gm with RS232 interface.AvailableAvailable+/-1 gm0.1 mmStainless steel material 1400*1250*1400650 kg.415 volt, 3ph.
Use of vacuum to hold the parts.Equipped with 2 knife sets with large-distance slide block. The angle of knifecan be adjusted between 0 and 90.The inner & outer diameter can be trimmedsimultaneously or individually.
Application:
Suitable for trimming oil seals, cups, packing and soft rubber material parts.
Features:
Specification:
Spindle Motor PowerVacuumCircular run out of main spindle Speed of spindleCut degree Seal diameterBlade SpecificationControl System Interface Data Logging & Operator Monitor Password Protection Production CapacityMachine Dimension (W)*(D)*(H)Machine Weight Main Supply
VACUUM TRIMMING MACHINEJN-150
0.5 HP0.05 mpa ≤0.01200 ~ 3000 rpm0° ~ 90°10 to 200 mm.3 x 3 x 60 mmPLC HMIAvailableAvailable15~20 pcs/min(L) 850 x (W)850 x (H)1800280 Kg.230 Vac, 50 Hz.
Application:
Features:
Lab Press is used for preparing test slab & test button forcompound evaluation in the laboratory.
Lab Press has temperature setting from PID controllers, pressure& RAM displacement values shown on the HMI.
Specification:
Lab Press
Cutting Horse: Power 1 HP
WARMER PRESS
Application:
By using Warmer Press you can save valuable time of production equipment.Hold temperature is raised closed to the desire temperature before shifting tothe production hydraulic face.
Features:
Two hand operationSafety GuardsMoving Platen Locking ArrangementAir Pressure drop detectionHeater current meters on the operating panel.
Specification:
Current Detection UNIT
CDU-096
Application:
The heaters can be monitored for proper function with the help of this unit.The unit can detect abnormal currents & warm on the user about its failure. This greatly helps thepreventive maintenance team & quality personal to ensure the quality product coming out of thepress. Defects due to temperature variation are greatly reduced.
Specification & features:
24 Vdc operated.9 or 6 current channels per CT card.High & Low current threshold setting through HMIAC current measurement accuracy 0.1 Amp/channel.Individual heater current channel bypass functionality implemented in unit.Unit consists 2 nos of potential free output.Unit consists of 3.5" TFT LCD screen.setting keys provided on front panel.MODBUS protocol for communication between current card and HMI.MODBUS communication provided.
D1 Block Plot no.12/8 MIDC, Chinchwad, Pune411019
+91 2030623397/96
www.jneindia.in