jagriti3
TRANSCRIPT
-
8/3/2019 JAGRITI3
1/86
A SUMMER TRAINING REPORT
ON
PERFORMANCE MANAGEMENT SYSTEM
INsss
JAGATJIT COTTON TEXTILE
ACKNOWLEDGEMENT
A SUMMER TRAINING REPORT
ON
PERFORMANCE MANAGEMENT SYSTEM
IN
JAGATJIT COTTON TEXTILE
SUBMITTED TO
PUNJAB TECHNICAL UNIVERSITY
SUBMITTED IN THE PARTIAL FULFILLMENT OF THE REQUIREMENTS OF
MASTER IN BUSINESS ADMINISTRATION
PROJECT GUIDE SUBMITTED BY
MR.RAJESH SHARMA JAGRITI RANA
DGM (JCT) MBA (HR)
H.R DEPARTMENT
DAV INSTITUTE OF ENGGENERING AND TECHNOLOGY
JALANDHAR
-
8/3/2019 JAGRITI3
2/86
ACKNOWLEDGEMENT
Perseverance, inspiration and motivation have always played a key role in the success of any venture.
Beginning as well as completion of my project report is greatly attributed to all those who inspired
and motivated me, whose wide spread knowledge in the subject and valuable suggestion made my
project work really worth while. Exchange of ideas generates energy and a will to work
in a better way. Whenever others help a person he is bound to pay gratitude to
them. Acknowledgement is not merely a formality, rather an expression of deep
gratitude.
I take opportunity to express my sincere gratitude and thanks to all those who
helped me in various ways in the successful completion of my project.
Firstly I owe my sincere thanks to Mr. H.K Chopra (V.P plant) who accepted
me as a trainee in esteemed organization. I am obliged to Mr. Rajesh Sharma
(DY General Manager, HR) who in spite of their busy schedule directed me to
proceed in the right direction with great enthusiasm and zeal.
It is a privilege to record my heart felt gratitude to my esteemed guide Miss
Manu kochher I shall remain indebted to her for her able and mature guidance
and wholehearted cooperation. I wish to thank her for his consistent moral
support and the assistance he regularly provided me.
I am extremely grateful to all the members of HR Department for their solicited
and selfless help.
I owe my thanks to my beloved family and friends for their consistent moral
support. They are the ones who have encouraged me at every step of my life.
JAGRITI RANA
-
8/3/2019 JAGRITI3
3/86
TABLE OF CONTENT
Page No
Preface 1 Objective of study 2 Introduction to Thapar group 3-5 Introduction to organization
JCT limited an overview 6-7
Profile of JCT 8-11 Corporate mission of JCT 12
Corporate philosophy 12
Quality Policy of JCT 13
HR Philosophy 14
Quality Circle 15
Reason for choosing JCT 16
Social Responsibilities performed by JCT 17-18
Organization chart 19
Promotion Chain Of JCT 20
Introduction to various departments 21-32 Research Methodology 33-34 Introduction to the project
Introduction to project 35
Purpose of appraisal 36
Factors affecting appraisal system 37-38
Frequency of appraisal 38-39
Methods of appraisal 39-42
Limitations of appraisal 42-44 Essential of good appraisal
Appraisal Methods used in JCT 47-53 Data presentation, Analysis and Interpretation 54-72 Findings 73-74 Limitations of Project 75 Suggestions 76-77 Conclusions 78
-
8/3/2019 JAGRITI3
4/86
Bibliography Annexure
PREFACE
Management is a vital function concerned with all the aspects of an enterprise and hence a course in
business administration has become a sort of pre requisite for a successful career in todays dynamicbusiness environment. Theories on Management aim at establishing the best way of doing things
undyingly, the situational needs determine their mode of application. Effective Management is
always a situational management. So a student undergoing a postgraduate program in management
needs to be exposed to realities in the field, which puts to test the classroom learning.
The project report relates to the basic needs and expectations of he employees in the organization.
The field of human resource has undergone many changes and the management requires skilled and
efficient workers for the growth and development of any company. Therefore proper study is
necessary for the further growth and diversification of the company.
To sum up, in this humble exercise and effort has been made to learn about the Performance
Appraisal at a reputed and esteemed textile company.
-
8/3/2019 JAGRITI3
5/86
OBJECTIVE OF THE STUDY
To know about the performance management system prevailing in JCT.
To know the satisfaction level of employees with the PMS. To analyze its effectiveness in its current scenario.
To study expectation of the employees towards the organization.
To gather information and history regarding the organization.
To analyze the shortcomings and provide suggestions for improvements.
-
8/3/2019 JAGRITI3
6/86
BREIF ABOUT THE THAPAR GROUP
So long as we have confidence in the
Values of the goal & excitement at
The prospect of setting forth into
Familiar territory and the will to do
New and good things.
I have no doubts that the future of
Indian & both safe & glorious
-Lala Karam Chand Thapar
(1900-62)
Founder of Thapar Group
-
8/3/2019 JAGRITI3
7/86
His vision of enterprise in the 1920 was certainly not a dream
AN INTRODUCTION TO THAPAR GROUP
Where growth is not only an obsession
A visionary who wanted to lay the foundation of an enterprise that would help India through her
formative years, founded the Thapar Group in the early 1920s. As pioneers they are the fourth
largest industrial conglomerate in the country, with over 54 different companies and 80
manufacturing plants. Assets have accumulated over Rs. 24,000 million with an annual turnover of
about $ 2 billion. The group grows annually at the rate of over 19%. The group has diversified
industrial interests that include Paper, Chemicals, Textiles, Man made Fibers, Glass, Electronics,
Heavy Engineering, Diesel Engines, Power Equipment, Motor and Pump sets, Gensets, Transmission
and Distribution Equipments etc. Beyond this, the Thapar Group manufactures equipment for
industries related to Aviation, Mining, Marine, Metallurgy, Oil exploration, Shipping, and
Mechanical handling. Industrial products like Electronic Process Instrumentation Boilers and
Furnaces, Steam and Energy Control Equipment are also the part of Thapar Groups activities.
Software growth is another area that Thapar Group has explored.
Flagship that represents the Thapar Group:
Ballarpur Industries Ltd.
JCT Ltd.
Compton Greaves Ltd.
Greaves Cotton and Company Ltd.
The companies have gone beyond their initial industrial interest and pioneered a wide range of
products and services through their subsidiaries. The Thapar Groups spectacular growth in a span of
over 80 years is a result of two factors:
-
8/3/2019 JAGRITI3
8/86
A clear philosophy that governs the mission of business across all levels of hierarchy and the
openness of mind to share global technologies with those who are willing and brave.
The Thapar Groups manufacturing values ensure associations only with the worlds best and
most capable corporations. The collaboration list constitutes giants like Du-Pont, Zimmer, AG
Hitachi Ltd., OKI Electricals, Westinghouse, David Brown Ruston & Hornsby Hawker
Siddsley, Siemens AG and Bush Electronics.
The group owes its success to a well known attitude of doing business globally and nationally, an
attitude that involves lighting changes, both in terms of technology, infrastructure, and ability to
adopt the changing scenario at home and abroad, and a warm management philosophy that always
puts people first.
-
8/3/2019 JAGRITI3
9/86
AN OVER VIEW OF JCT LIMITED: PHAGWARA
In the field of cotton and blended fabrics, JCT has always been a trendsetter. It is one of the leading
manufacturers and exporters of cotton textiles in the country.JCT limited Phagwara; a composite unit having spinning, weaving, and processing facilities is a blue
chip company of the Thapar Group and was incorporated on 28th October, 1946 under the name of
M/S Jagatjit Cotton textiles Mills. The establishment of JCT limited was the result of the decision
taken by the government of India under the post war development plan. It was decided to locate the
mill in the north India and after much discussion; Kapurthala was selected as a site for textile venture.
It was M/S Karamchand Bros. Ltd. Who entered into a final contract with the government of India to
set a mill at Phagwara (Punjab). The disadvantage of unfavorable weather was offset by other factors
such as cheap labour, availability of raw material, and governments aid. Thus, the company came
into existence in 1946.
In the initial years, the business was on a small scale and the company was manufacturing only cotton
fabrics. That is why it is called Jagatjit Cotton Textiles Ltd. Afterwards the company also started
manufacturing cotton yarn, and nylon T filament yarn. JCT has made a big dent in synthetic markets
by producing plain and fancy suiting; both piece dyed and fibre dyed and dyed yarn shirting in
innumerable designs and weaves to cater the different segments of the market.
The policy of management to reinvest its profits year after year led the mill to grow rapidly into one
of the leading textiles mill in the country. In 1995, Rs. 300 crores was invested for the modernization
of the Phagwara unit. This unit is now one of the most modern units with the state of art technology.
The management for over three decades has implemented the concept of participative management.
The workers/ employees and their representatives are fully involved in the management and running
the affairs of the company. This policy of management has generated tremendous goodwill for the
company amongst its employees and the result is that the company has a committed workforce of
about 5000 workers and 530 employees and the most cordial employee- employer relationship.
-
8/3/2019 JAGRITI3
10/86
As this is the era of cutthroat competition, JCT believes in quality, which results in leadership, and as
result, this has led them to tremendous growth. JCT fabrics have captured profitable sections in the
market. There has been a constant growth in the man-made fibre with a wide variety of nylon and
polyester filament yarn.
JCT PHAGWARA COMPLEX
The complex consists of a mill and the Thapar colony. In the mill, there is a main production unit,
administration offices, go downs, stores, canteen, dispensary, and the turbines for the generation of
electricity.
The residential complex known as Thapar colony is for the officers and other employees. It includes
gymnasium, club, and a lake for boating. The whole complex, thus, is like a small town in itself.
Recognising the need for global brand acceptance JCT went for ISO certification too was the first
composite mill to be awarded this certification.
FABRIC RANGES OF THE COMPANY :
FABRIC STYLES :BULL DENIMS, TWILLS, CHINO, CORDS, CANVAS,
DUCKS, FLANNEL, TUSSORES, YARN DYED SHIRTING,
PRINTS UPTO 8 COLOURS.
FINISHES :MICRO-SANDING, PEACHING, SOFT-FINISH, STIFF
FINISH, EASY CARE, WATER REPELLENT, RAIN AND STAIN
PROOF.
BLENDS :100% COTTON, POLYSTER: COTTON BLENDED FABRICS-
65:35, 35:65, POLYSTER VISCOSE WITH BLEND 48:52.
FABRIC CONFIGURATION: IN VARIOUS COUNTS IN OPEN END, CARDED, COMBED
RING SPUN YARNS IN SINGLE AS WELL AS PILED
-
8/3/2019 JAGRITI3
11/86
PROFILE OF
JCT LIMITED, PHAGWARA
(AN ISO-9002 COMPANY)
Established in :1946
Operation of production : 1951
In 1950s Installed Capacity
Spindle : 63244
Looms : 390
Present Installed Capacity
Spindles : 63244
Open End Rotors : 1488
Looms : 450 Conventional
171 Sulzer
28 Air Jet
Annual Turnover Exceeding Rs.
300 crores
-
8/3/2019 JAGRITI3
12/86
Technology partner
Sulzer,Schafrost
Saurer, Volkman
Manfort, Benninger
Airjet
Manpower : Workers:
4500(app.)
Staff: 550(app.)
Regd. Office : Village Chohal
Distt. Hoshiarpur
46001 (Pb.)
Corporate Office : Thapar House
124, Janpath
New Delhi-110001
Strategic Alliance and collaboration :
Du-Point General electric
Hitachi Mitsubishi
Zimmer Piaggio
A.P Moller Group E.A Staley & Co.
Indian Operation
Composite Textile Plant Export Division
-
8/3/2019 JAGRITI3
13/86
Picture Tubes
Capabilities
HVI System (Cotton testing) Open end preparatory
Open end shipping Carding and ring spinning
Auto Corner Weaving Machine
Finishing machine CAD System
Export Market
United Kingdom (UK) USA
South East Asia Middle East Asia
Bangladesh Sri Lanka
Mauritius
Domestic Marketing
Defense Services (Largest Consumer)
Wholesaler & Retailer
Export Merchant
Company Secretary Mr. S.C Sexana
Auditor S.P Chopra & Co.
Chartered Accountants
F-31 Connaught Place
New Delhi 110001
Units
Textile Phagwara(Punjab)
Sri Ganga nagar (Rajasthan)
-
8/3/2019 JAGRITI3
14/86
Filament Hoshiarpur (Punjab)
Subsidiaries
Chohal Export limited
Polytex FibersTradingLimited
Rajdhani Trading Limited
JCT (International) Pvt Ltd
Gupta & Syal Limited
Board of Directors
Mr. M M Thapar Chairman & MD
Mr. Samir Thapar Vice Chairman & MD
Mr. S.K Singal Executive Director
Mr. T.N Subramanium Director (Finance)
Mr. Rajmohan Singh Director (Operations)
Location
The mill is situated in Phagwara town on G.T.Road on the National Highway No.1. It is 40 km
from Ludhiana towards Amritsar and 25 km from Jalandhar towards Ludhiana.
-
8/3/2019 JAGRITI3
15/86
CORPORATE MISSION OF JCT LTD
To consolidate and develop core business areas mainly: synthetic and textiles.
To attain the position amongst the leading composite textiles mills in India and to retain its
position among the top companies in the synthetic fiber industry.
To expand and diversify into allied product areas and simultaneously increase global presenceand develop international markets together with domestic markets to achieve rapid growth.
To evolve into a quality conscious, customer oriented, and fast expanding organization.
CORPORATE PHILOSOPHY
JCT believes in dignity of human beings.
JCT believes that there exists a psychological contract between the organization and the
employees, and the growth of both is interlinked.
JCT strive to attract, develop, and retain the best talent available.
JCT doesnt believe in any discrimination on the basis of caste, creed, religion, race, or gender.
JCT believes in the concept of right person at the right job.
JCT values merit and recognizes ability.
JCT encourages teamwork and believes that this enhances problem-solving capabilities.
JCT actively promotes sports and other cultural activities for cohesiveness and harmony.
JCT knows that it is the part of the changing environment and that it has to be proactive to
such changes. JCT continuously strives to be a better corporate citizen.
-
8/3/2019 JAGRITI3
16/86
QUALITY POLICY OF JCT
Customers satisfaction is the motto of JCT Ltd. They, therefore commit themselves to produce and
deliver such fabrics so as to meet the customers demands.
U p gradation of Identification ofQuality customers needs
QUALITYPOLICY
Continuous Confirm the desiredImprovement standards
CustomerSatisfaction
This is achieved by:
Identifying customers requirements and converting them into products.
Pursuing the process of continuous improvement by the employees of the organization.
Ensuring that quality standards are maintained and upgraded to reflect the changing
customers requirements
-
8/3/2019 JAGRITI3
17/86
HR PHILOSPHY
Employees in jct are its most valuable resources for the development of business and for thatemployees must go hand in hand.
Every employees has special and unique skills in his own field and has infinite potential tomake contribution to the organization.
Merit is the most important criteria for recruitment and reward.
Creativity and innovation in technology and management through our people is ourcompetitive edge.
HR process facilitates consistent improvement in performance, productivity and effectivenessthrough mutually agreed stretched targets.
Continuously strive to improve quality of work life for total job satisfaction and socialharmony for the employees.
HR prepares people to accept and adapt to change and learning as a way of life.
HR promotes high standards of discipline at the workplace and compliances with the laws ofthe hand
QALITY CIRCLES
Quality circles is the group of voluntary participants with or without a leader who meet after some
specified period of time to solve the problem related to their respective work areas. In JCT at present
5-6 quality circles are working efficiently to attain the desired objective of producing the quality
products.
-
8/3/2019 JAGRITI3
18/86
REASON FOR CHOOSING JCT LIMITED
JCT Ltd is one of the famous, oldest and renowned company in India and also accepted in many
countries. JCT ltd one of the leading manufacturing of textile is the flagship company of the one of
the largest conglomerate Thapar Group having a turnover of 300 crores.
In the field of cotton fabric or blended JCT Ltd has always been a trend setter. It is one of the
manufacturer and exporter of the cotton textile in the industry. It appears to be on the fore front of the
cotton industry in the country from the point of view of profitability and productivity their products
are well known for their quality through out of the country.
Company occupies a unique place and enjoys credit worthiness, goodwill among its creditors,
suppliers, customers and bankers. It has been enjoying excellent labor management relation for the
last four decades.
Other than features mentioned above, the company has some special features which are:-
Largest supplier to Indian armed force
Finest piece dyed shirts
JCT team spearheads Indian Football
Heading Exporters of bottom weights
Indias first in organic cotton
Company takes special pain to provide practical and technical knowledge to the trainees. Thus there
are plentiful opportunities to learn for a student like me.
-
8/3/2019 JAGRITI3
19/86
SOCIAL RESPONSIBILITIES PERFORMED BY JCT
CORPORATE CITIZEN
JCT recognizes its social responsibilities towards its employees and their families, society at large
and the environment in which they operate. The company strictly follows all laws of the land
pertaining to labor, which include employment of only majors, more than minimum wages to its
workers. Proper welfare and safety for its workers.
SCHOOL
The company runs one of the best school in the district for the wards of its worker where
education is given free of cost.
ENVIRONMENT
The company maintains several parks and green island in the towns where JCTs plants
operate
-
8/3/2019 JAGRITI3
20/86
POLLUTION CONTROL
The Company has made major investment in machine and equipments to ensure proper
treatment of wastewater, air and solid before discharging them into the community drainagesystem.
SPORTS
JCT has also made major investment for the promotion of sports. Football Team is one of the
leading National Teams in the country. JCT Football Club, found in 1971, is an professional
football club based in Phagwara, Punjab (India). The companys football team is one of the
well-known teams of India, and their members are part of the national squad. The JCT football
team has won almost every championship in India from the inaugural National League to
Durand Cup, Rovers Cup and Federation cup among others.
The team represents a hope for the future of Indian Football. JCT has set up a Football
Academy at Phagwara, which represents decades of investments. The company also promotes
sports like Body Building, Squash, Golf and Shooting.
-
8/3/2019 JAGRITI3
21/86
ORGANISATION CHART
DIRECTOR [OPERATIONS]
MARKETING
ADMIN
L & IR
F & A
PROCESSING
ENGINEERING
SPINNING
WEAVING CONV
WEAVING SULZ
IT
R & D
EXPORTS
DEVELOPMENT
PLANNING
WARE HOUSE EXPORTS
RAW MATERIAL.
COMMERTTIAL.
Sr. V.P. PlantISO CELL
HR
WARE HOUSE COTTON
-
8/3/2019 JAGRITI3
22/86
PROMOTION CHAIN IN JCT LTD
Clerk
S.R clerk
Asst. Officer
Officer
Sr. Officer
Asst. Manager
Dy. Manager
Manager
Asstt General Manager
Dy General Manager
General Manager
Vice President
Sr. Vice President
Director Operation
-
8/3/2019 JAGRITI3
23/86
INTRODUCTION OF VARIOUS DEPARTMENT JCT
There are total 29 departments in the JCT MILL. These departments are divided into two
categories: -
In todays competitive world, the process of production is very important but the stand of the
company becomes strong and sound if it moves towards productivity. This increase in
productivity has to be achieved without sacrificing the quality of the end product. To meet the
required objectives, the mill is divided into three main functions contributing equally to the
effective and efficient working of the mill. These three major functions are subdivided into
Departments and further into sections these three functions are as follows:
A). Production Function
B). Non Production Function
C). Service Function
Production Function comprises of the following Departments:
1). SPINNING
A) Cotton Spinning
B) Synthetic Spinning
C). Spinning Auto-Coro/ Open End Spinning
D). Spinning Maintenance
E). Post Spinning
2). WEAVING
A) Weaving Preparatory Conventional
B). Weaving Conventional
C). Weaving Preparatory Sulzer
D) Weaving Sulzer3). PROCESSING
A) Synthetic Processing
B) Cotton Processing
C) Finishing
D) Printing
-
8/3/2019 JAGRITI3
24/86
Non Production Function comprises of the following Departments:
1). Warehouse
a) Mending
b) Grey Folding
c) Cotton Ware House
d) Synthetic Warehouse
e) Exports Warehouse
2). Marketing
a) Domestic Marketing
b) RMG Marketing
c) Exports Marketing3) Raw Material Department
4) Fabric Development Department
5) Production Planning Department
6) Research and Development
7) ISO Department
Service Function comprises of the following Department:
A) Human Resource Department
B) Finance and Accounts Department
C) Information Technology Department
D) Administration Department
E) Purchase Department
F) Engineering Department
G) Labor & Industrial Relation Department
-
8/3/2019 JAGRITI3
25/86
PRODUCTION DEPARTMENT:
A) SPINNING
COTTON SPINNING (PROCESS SEQUENCE
RAW MATERIAL (FIBERS IN BALES)
BLOW ROOM
CARDING
SLIVER LAPPER
DRAW FRAME-I
COMBER
RIBBON LAPPER
SPEED FRAME
RING FRAME
http://www.jcttextiles.com/Tech03.htm -
8/3/2019 JAGRITI3
26/86
SYNTHETIC SPINNING
This department also produces yarn but uses the blend of Polyester and Cotton (PC) or Polyester and
Viscose (PV). The process of synthetic spinning differs as per the PC and PV blend.
Before the spinning process required cotton is got from the ginning operation. JCTS own ginning
plants are located at sri ganga nagar, khanna, abohar and jagraon.
SPINNING AUTOCORO / OPEN END SPINNING
The spinning autocoro section works under the OPEN END technology. The section gives many
advantages over the conventional spinning process.
SPINNING MAINTENANCE
This department is responsible for the preventive maintenance of all the three spinning sections. This
section deals with many cases like replacement of broken machinery parts and cleaning of the
machines. This section plays a major role in the working of the spinning machinery.
POST SPINNING
This section comes after the final spinning in the ring frame section.
The main objectives of this section are:
To make bigger packages of yarn so that the efficiency of the winding machine can beincreased.
To clear the yarn from the thin and thick places (correcting the faults). It is essential to impart
proper tension to the yarn so as to reduce snarls and hence breakages in the further process.
http://www.jcttextiles.com/Tech01.htm -
8/3/2019 JAGRITI3
27/86
B] WEAVING
WEAVING PREPRATORY
The main objectives of this section are:
To prepare the sheet of warp yarns (warping) as per the designs and the percentage of colors
threads used. To prepare the packages for weft yarn.
To seize the yarn so that the thread can withstand strains in the weaving process (sizing).
Drawing in/Tying in.
:
WEAVING CONVENTIONAL
This section provides gray fabric based on weaving machines used for fabric manufacturing.
WEAVING SULZER
As the mass of the shuttle (weft carrying package in conventional weaving) is very high, so the
acceleration or de acceleration of the shuttle is very less. So we can increase the production by using
lightweight weft carrier. Sulzer technique is based upon this principle and is widely used in JCT.
http://www.jcttextiles.com/Tech04.htm -
8/3/2019 JAGRITI3
28/86
C]PROCESSING
PROCESS HOUSE
The department comes into action when fabric from the weaving section is obtained in the grey stage.
Different chemical treatments are given to the fabric so as to improve its appearance and properties.
This section is divided in three main units:
Benninger Plant
Cotton Processing
Synthetic Processing
NON PRODUCTION DEPARTMENTS
Non Production Departments comprises of the following:
WAREHOUSE
It is a department where the final product is brought and is prepared for dispatch. Grey cloths
come to Ware House direct from loom. Following process / activity is being operated in this section:
1. Mending: This process is used to find defects in the cloth under lights.2. Inspection: An inspection machine is used to check the fault.
3. Planting: Planting machine is used to measure the cloth.
4. Grading: Processed cloth is graded on the basis of quality.
Warehouse is divided into three parts
http://www.jcttextiles.com/Tech07.htm -
8/3/2019 JAGRITI3
29/86
Warehouse Cotton
Warehouse Synthetic
Warehouse Grey Export
MarketingMARKETING DEPARTMENT
After the manufacturing process is over, it is the duty of the marketing department to sell these
manufactured goods to the retailers and wholesalers at profitable rates. The marketing department has
three sections:
DOMESTIC MARKETING
JCT is largest supplier of fabrics for ministry for ministry of defense and has been a reliable
supplier for past 25 years.
JCT has a strong presence in school uniforms and institutional suiting and shirting.
JCT has the largest dealer and distribution network.
RMG MARKETING
Fabrics supply to garment exporters in India.
Most of the business is nominated and is routed through buying houses.
Major buying houses are Gap,Triburg,Impulse,Nike,etc which are India Offices for retail chains
across the world.
Buying House acts as a monitor.It approves the quality, finalises the delivery schedule with mills
and assigns the garmenting responsibility to a garmenter which ships the garments to the
respective destinations.
EXPORTS
Directly sending the fabric to overseas markets.
1/3rd of the production is exported to Europe, USA, S. Africa, Middle East, Far-East, Australia
and Latin America.
-
8/3/2019 JAGRITI3
30/86
Different markets have different dynamics. Some markets like Nepal,Srilanka,Bangladesh,etc are
thriving purely because of Quotas.
JCT works with overseas agents on commission basis
Catering to following countries-USA, Italy, Spain, Holland, Czech Republic, Greece, Portugal,
Germany, France, Singapore, Mauritius, South Africa, Kenya, Bangladesh, Nepal, Australia,
Medagascar, Egypt, UAE, Turkey, Kuwait, Baharain etc
Type of buyers-Buying houses, readymade garment manufacturer, Stockiest, Traders etc
Export turn over-1 million meter per month
RAW MATERIAL DEPARTMENT
The major function of this department is to check the desire amount of raw material in the stores and
to meet the demands of the production department. In JCT the following raw material is purchased:
i). Cotton Bales ii). Organic Cotton
iii). Polyester Fiber IV). Viscose
v). Cotton yarn VI) Polyester Viscose yarn
vii) Polyester Filament Yarn viii) Grey Fabric
FABRIC DEVELOPMENT
To grow effectively in the industry, development is very necessary. Changes in the ongoing processes
are made to create an improvement in the design and the quality of the fabric. Fabric development
department is working in this direction. It is directly related with the marketing department and also
to the whole mill directly or indirectly. As per the requirements of the marketing department, the
desired design and the quality of the fabric is developed .The whole process is carried on with the
help of computers.
PRODUCTION PLANNING
This department acts as a conduct between the marketing department and the production department.
The main objectives of the planning department are:
-
8/3/2019 JAGRITI3
31/86
Checking the feasibility of the order and the specifications placed by the customer.
To plan the entire production process to meet a particular order in the set time limit.
To give data specification to the fabric development department.
To ensure that the fabric so produced confirms the specifications of the order and the
marketing department. Coordinating all the departments to ensure smooth functioning.
All changes in the production are made with the consent of the planning department.
Thus, this department focuses on the utilization of the full capacity of all the production units. It
works for the proper management.
RESEARCH AND DEVELOPMENT
The main objective of this department is inspecting and testing. It insures quality from input to
finished product. Persons related to different buyers group come here and approve the quality from
their research.
ISO CELL
This is the Cell for the International Standards Organization. The Scope of this department is
Development; Production & Marketing of Cotton & Blended Yarns & Fabric for apparel uses. This is
basically a quality management system. The British Standards Institution (BSI) gives the ISO
standards and certification. Based on that Procedure are defined and followed. JCT at present is an
ISO-9001: 2000 certified company. This certification relates to the following:
Development
Production
Servicing
http://www.jcttextiles.com/Tech09.htm -
8/3/2019 JAGRITI3
32/86
SERVICE DEPARTMENTS
ENGINEERING DEPARTMENT
HUMAN RESOURCE DEPARTMENT
It is that branch of management that deals efficiently with the proper utilization of human resources
and to get the maximum output. The major focus areas include
Man Power Planning
Recruitment
Training
TQM Quality Circle, Kaizen, & Cross Functional Teams
Employee Performance
Employee Welfare
Personal Records
It also takes care of discipline matters, personnel information system etc. It also provides strategic
and logistic support to the industrial relation matters of the company.
INFORMATION TECHNOLOGY
This is one of the services Department of the Company. It interacts with all the other
departments of the company and is responsible for the smooth flow of the information from various
department to management helping them in prompt & appropriate decision
The main objectives of this department are: -
To develop software for various reports as per the need of different departments
To maintain the efficient working of the various modules of Ramco Applications & In House
Developed Software
To maintain the security of data and different reports in the company
To provide online information to different departments for theyre efficient working.
To develop new softwares and reports for various departments for the smooth flow of
information
-
8/3/2019 JAGRITI3
33/86
To provide & Maintain the Network as well as the Computer hardwares of the company
To maintain Data base
FINANCE AND ACCOUNTS
Finance department is one of the important sections of the company. The main idea behindmaintaining the records is to judge the accurate position of the company regarding the profits made or
the losses incurred by the company. The objectives of the finance department are:
To ascertain the results of the business activities carried on during the year.
To show the financial position of the business as on a particular date.
To meet the requirements of the taxation authorities, investors, management, and owners.
This department is divided into following sections:
Production accounts
Store accounts
Cost accounts
Financial accounts
General accounts
Costing: Pre-Production Costing
Routine Costing
Productions
Returns
Budgeting:
Budgets are prepared monthly, quarterly and yearly as per the requirement.
PURCHASE DEPARTMENT
All the purchases made by the mill are made through this department (except the raw materials). This
department manages the purchase of the following items:
New machinery
Dyes and Chemicals
-
8/3/2019 JAGRITI3
34/86
Packing Materials
Capital Goods
Spare parts for all machines
ADMINSTRATION
The administration department ensures Office Establishment, Dispatch, Transportation, Records Leave& Insurance of the company.
FACTORY
The factory department ensures safety, security, and welfare of the workers of the company. The
main objectives of this department are:
To ensure safety and security of the staff and workers.
Disciplinary actions in regard to workers.
Recruitment of workers and allotment of departments.
To keep the record of the attendance of the staff members and the workers.
To prepare the statement of the salary and wages of the staff and the workers.
This department is also called the personnel department. It ensures the safety, security and
welfare of the staff and workers. It takes care of disciplinary actions and sports. This department is
further divided into following sections:-
a) Time Office: This section deals with recording of time of workers, staff members
and trainees with the help of numbered cards.
b) Safety Department: There are three safety officers in JCT. If an accident occurs inside the
plant then proper enquiry is done so that this could be avoided in the
future.
c) Security Department: This department makes all arrangements of security in the
factory.
d) Establishment: This department makes the records of wages and salaries of staff and
workers. Employees Staff Insurance Corporation provides the staff
members free medical services.
-
8/3/2019 JAGRITI3
35/86
RESEARCH METHODLOGY
The purpose of study is to evaluate the satisfaction level of the
supervisory staff with the performance appraisal system. The methodology used to
accomplish this, has been elaborated here under:
SAMPLE SIZE: - The sample size is 60 respondents.
SAMPLING TECHNIQUES: -Technique of Convenience sampling
TARGET POPULATION:-The target population varied from 24 years to 65
years.
RESEARCH DESIGN: - The research design employed in the study is of
descriptive nature.
INFORMATION ACQUIRING TECQNIQUES:-Information has been
collected using both primary and secondary methods. The Primary information
required has been collected by way of personal interviews structured non-
disguised questionnaire in order to make the surveys interactive.
In addition to the above-mentioned sources, secondary sources of
information have been collected through catalogs, website and reports files and
records and handbook of employees of JCT.
QUESTIONNAIRE DESIGN:-The questionnaire has been designed covering
18 queries made to 60 respondents which represent sampling at random.
DATA COLLECTION: - The data is collected by using survey method.
-
8/3/2019 JAGRITI3
36/86
DATA ANALYSIS: -The data collected has been analyzed by means of graphs,
charts using simple averages in order to research more accurately.
-
8/3/2019 JAGRITI3
37/86
PERFORMANCE APPRAISAL: THEORETICAL
FRAMEWORK
Performance appraisal or merit rating is one of the oldest and most
universal practices of management. It refers to all the formal procedures used in
working organizations to evaluate the personalities and contributions and potential
of group members. Modern management makes somewhat less used to be on the
evaluation of merits of an individual his worth as a person. The approach
resulted in a appraisal system in which the employees merit like initiative,
dependability, personality, etc. were compared with others and ranked or rated.
This was; however, open to question because the connection between performance
and possession of traits was doubtful. Trait evaluations provide little tangible to
discuss, little on which participants could agree as fact and, therefore, little mutual
understanding of what would be given to measuring the results of the employees
performance. The trend nowadays is in the direction of attempting to measure
what the man does (performance appraisal) rather than what he is (merit rating)
to measure what is input.
-
8/3/2019 JAGRITI3
38/86
PURPOSE OF APPRAISAL
Appraisal of employee serves several useful purposes.
It can serve as a basis for job change or promotion. By establishing whether
the worker can contribute still more in a different or a higher job it helps in
his suitable promotion and placements.
By identifying the strengths and weakness of an employee it serves as a
guide for formulating a suitable training and development programme to
improve his quality of performance in his present work.
It serves as a feedback to the employee. By letting the employee know how
well he is doing or where he stands with his superior it tells him what he
can do to improve his present performance and go up in the management
hierarchy. The appraisal thus facilitates multiplication of managerial
resources.
It serves as an important incentive to all the employees who are by the
existence of an appraisal system assured of the managements continued
interest in them and of their continuous possibilities to develop. Theemployees realize that not only are they being continuously observed but
they have not been forgotten
The existence of a regular appraisal system tends to make the supervisors
and executives more observant of their subordinates because they will be
expected periodically to fill out rating forms and would be called upon to
justify their estimates. This knowledge results in improved supervision.
Performance appraisal serves as means for evaluating the effectiveness of
devices used for the selection and classification of workers. Alternatively,
knowledge of the characteristics of superior and junior worker can be
helpful in selection and placement of workers and in making future
projections.
-
8/3/2019 JAGRITI3
39/86
Permanent performance appraisal records of employees help management
to give up sole reliance upon personal knowledge of supervisors who may
be shifted.
FACTORS AFFECTING PERFORMANCE
APPRAISAL
According to Prof. S.K. Chakraborty performance appraisal should be
done with caution. It is always advisable to make a preliminary survey of the
following constraints within which the employees of an organization are working.
Environment constraints: There are several environmental
constraints, which may be outside the control of a worker, and to ignore
this fact in judging his performance would be unjust. For example, the
quality of raw material in an organization may deteriorate over a period or
the machinery may break down unexpectedly. As a result both productivity
and quality may suffer. But if selection of materials and maintenance of
machinery are done at higher levels in the organizations the performance
appraisal of the workers should not be affected.
Organizational leadership: The style of the top leadership of an
organization should also be looked into. It is the nature of leadership at the
top which determines to a large extent the loyalty and commitment if
employees to the goal of an organization. Effective top leadership orients
and motivates the entire organization for better performance. Employees at
the entry level become highly performance conscious. Everybody likes
performance appraisal under such conditions. But in opposite conditions it
is considered an imposition or structure.
-
8/3/2019 JAGRITI3
40/86
Interdependence of sub-system : Since every organization is a big system
composed of a number of interdependent sub-systems, has got to be
interpreted n the context of all other sub-system to which it is related. For
example, the sub-standard output of the production department may be dueto the poor quality of purchases made by the purchasing Department or the
trouble may be at some higher level where planning for the production and
purchase department has been done. It is precisely because of this
interdependence of sub-system that suggestion is often made to start
performance appraisal from the apex. This leads to more systematic and
logical cause and effect tracing of Performance at all levels within the
organization.
Organization structure : Initiative, drive and innovation thrive best in a
flexible structure. These qualities do not receive encouragement in a rigid
structure. This is because in this type of structure the authority to approve
innovation is often placed several levels above the people who innovative.
This makes the proposal pass from person to person and robs the
information reaching the ultimate decision makers of much of its logic and
understanding. What is needed is a direct relationship between the doer
and the approver. In rigid structures ponderous planning and controls make
people give up innovating and becomes resigned and bitter. Rather than
beg for the acceptance of their innovative dead wood at work.
FREQUENCY OF APPRAISALS
Appraisal can be either summative or formative. In a summative
appraisal system an individuals performance is evaluated at the end of a specific
-
8/3/2019 JAGRITI3
41/86
period of time by summing his total achievement of stated goals, objectives,
strategies, etc. Formative appraisal system, on the other hand, sees appraisal as an
ongoing, almost daily process in which individuals receive a constant feedback on
their performance to be inputted to their continued development. Under thissystem, managers assume that the situation of constant change necessitates a
continuous process of appraisal rather than a time specific process. Formative
appraisal processes generally characterize those organizations whose environment
is one of constant flux.
METHODS OF PERFORMANCE APPRAISAL
Out of the various method of appraisal, the major ones are being enumerated
below-
1. Ranking methods: The oldest and simplest method of performance appraisal is
to compare one man to another and place him in a simple rank order. In this way
the individuals are ordered from the best to the worst in a group. This method is
both simple and natural but its disadvantages are:
It is highly subjective.
People are compared as a whole and there is no comparison of various
components that sum up to make the persons performance.
The magnitude of differences in ability between ranks is not equal at
different positions.
A variation in this method is the PAIRED COMPARISON RATINGsystem
wherein the appraiser compares each man in his group with every other man with
the final ranking of each being determined by the number of times he was judged
better than others.
-
8/3/2019 JAGRITI3
42/86
2. Rating Scale Method: Ranking method becomes unsuitable when the no to be
appraised is large and where it is desired to gain information about the absolute
difference between ranking individuals. In such cases rating methods are used.Rating scale provides a scale of measuring the absolute difference
between individual in respect of crucial job related factors such as quantity and
quality of work, cooperation, initiative, dependability, leadership, safety,
attendance etc. the rating scales that are used mat be DISCRETE where the
characteristics are divided into definite categories with discrete intervals, or
CONTINUOUSwherein the characteristics are rated along a continuum without
intervals between them.
There are four kinds of standards used in both kinds of rating scales. These are:
NUMERICAL STANDARDS: a series of letters or number are provided to
indicate variations in the level of desirability of characteristic being rated .For
example, a 1 to 10 scale or a five point rating from A to E.
DESCRIPTIVE OBJECTIVE STANDARDS: a series of descriptive adjectives
like excellent, good, poor, etc are used to indicate the level of desirability of
characteristic being rated.
The drawback in both these methods is that the alphabets, numbers or
adjectives do not convey the same meaning to all appraisers.
MAN-TO-MAN SCALE: These standards are very concrete because these are
persons of varying ability who have been selected and ranked in the ability under
consideration. Thus, a scale of men is created for each trait.
The objections to this scale are-
It is very difficult to construct
-
8/3/2019 JAGRITI3
43/86
Changes in standards occur when the models leave the
organization.
Intervals between men are often not of equal magnitude.
BEHAVIOUR SAMPLE STANDARDS: A series of actual description of
behaviour is employed which is supposed to indicate varying amounts of the
characteristics being rated. The use of actual descriptions of behaviour reduces
some of the differences in interpretation by the appraisers. The most popular
behavior sample standard is the BEHAVIORALLY ANCHORED RATING
SCALES (BARS).
3. Check List Method: This is a list consisting of a number of statements about
the workers and his behavior. Each statement on the list is assigned a value
depending upon its importance. In apprising a person the appraiser is asked to
place a plus sign, minus sign or question mark against each. The workers final
rating is taken as the average of the scale values of all statements checked with
plus sign. The objections to this system are:
It is difficult to construct a checklist
A separate check list for each job is required.
Since ratings given to statements are hidden from the appraiser, he
may resent the system.
4. Forced Choice Method: A forced choice method form consists of a number of
statements which describe an individual being rated and the appraisers is
compelled to check a most and a least relevant in each group of statements. This
method has built in safeguard against partiality. The appraiser does not know
which of the statement in a given group is critical or relevant for effective job
performance. The objection to this method is:
-
8/3/2019 JAGRITI3
44/86
It is expensive to install because the statements in a forced distribution
choice form have to be custom tailored to the company.
Ratters may resent the method as rating given to statements is hidden from
the appraiser.
5. Critical Incident Technique: The critical requirements for each job are
identified, listed and assigned values by experts. The appraisers then records on
the job behavior and tallies it with the critical incidents. The objections to this
method are:
Critical incidents are difficult to identify.
It is not desirable to confront an employee with a mistake he committed
four to six months ago.
The scope of halo or horn effect is increased in appraisal.
6. Essay Method: The appraiser is required to give in writing an informed and
honest account of the candidates strengths, weakness, potentials, and so on. The
drawbacks are the variability of the account in length and content which makes
comparison difficult.
LIMITATIONS OF APPRAISAL METHODS
1. Emphasis on human performance without regard for human values.
George S Odiornel denounces all appraisal methods for their single inherent
weakness that they lay emphasis on alikeness and conformity for human
performance ignoring measurement of human values. All appraisal methods,
according to him, are like quality control system which force subordinates to
conform to certain standards of physical performance without caring for human
values which for less tangible are essential ingredients in the whole process .
-
8/3/2019 JAGRITI3
45/86
The result is that this appraisal methods rank both the benevolent and
despotic managers equal if they are found equal in their physical achievements-no
matter if their value systems are widely different .Rudolph Roses, who had
personally supervised the execution of tow million political prisoners in Germany,would thus we measured by many appraisal methods as excellent a managerial
skills of organizing, planning and control.
2. Halo effect: It is the tendency of the superior to allow his good impressions of
one or two important work characteristics of an individual to carry over the total
evaluation. In such a case the superior rates all the characteristics of a person much
higher then they should be. For example, if the superior is a person who is very
fond of punctuality, a punctual worker may get a high rating on practically every
factor though many factors have little to do with punctuality.
Following are some other examples of this effect:
(1) The man who has done good work in the distant past is assumed to be good in
the recent past also.
(2) Those who agree with us nod their heads when we talk and as skilled flatterersget better ratings then performance justifies.
(3) The man who did an outstanding job last week or yesterday can offset
mediocre performance over the rest of the year by this single act.
(4)The man who pesters the boss but gets the work done may be rated lower then
the silent, solitary dud.
3. Hypercritical or Horns effect: It is the tendency of a superior to rate
people lower then their performances justify. Following are some examples of
this effect:
-
8/3/2019 JAGRITI3
46/86
The superior is a perfectionist. Because his exception level is very high, he
is more often disappointed and rates his people lower then should.
The maverick or the non-conformist gets a low rating simply because he isdifferent.
The man who has recently failed may wipe out the effect of years of good
work on his appraisal and be rated low on his recent behaviour.
The man who is too meek, too passive or who lacks some traits we attach to
good men may suffer in his rating.
The man who does not do the job as well as we remember we did when we
held that job may suffer more than those who do work unfamiliar to us.
4. Central tendency and leniency: The superior is frequency guilty of averaging
too many work characteristics in the middle grades. It may result from the fact that
he does not know rates well enough to express a discriminatory opinion. He may
result from the fact that he does not expose his lack of more information. The
related limitation are sometimes overcome by following a forced distribution
system, in which certain percentages are established foe each grade and the rater is
asked to keep in view these percentages while rating appraises under him. This
system has the advantage of forcing a distribution of the juniors in different
grades. This system has the advantage of forcing a distribution of the juniors in
different grades, so that the rater cannot relax and judge them all as average,
juniors or below average.
5. Reluctance to Play God: Some managers are willing to play god by
judging others. Accepting responsibility, for being a judge, for the future of
-
8/3/2019 JAGRITI3
47/86
another person serves anxiety in some people. The tendency to complete the
appraisal form at the last moment when they are due and to treat the entire process
casually may well be necessary to relive the anxiety of the evaluator in the feeling
that the superior is arbitrary in his judgment. This is a very frustrating experiencefor an honest and impartial superior.
6. Defensiveness of employees The appraisal process frequently creates
defensiveness among employee. Since the supervisors appraisal influences the
employees most vital job concerns-promotions transfer and dismissal- the
employees defensiveness during an appraisal interview often makes the procedure
unproductive for both the supervisor and their juniors.
ESSENTIALS OF A GOOD APPRAISAL SYSTEM
Following are the essentials of a good appraisal system:
It must be easily understandable: If the system is too complex or too time
consuming, it may be anchored to the ground by its own dead weight of
complicated form which nobody but the experts understand.
It must have the support of all line people who administer: If the line
people think it is too theoretical, too ambitious, too unrealistic, or that it has
been foisted on them by ivory-tower staff consultants who have no
comprehension of the demand on the time of the line operators, they will
resent it. Similar, if they feel that their role is not very important they will
not take the system seriously. At present, in many Indian organizations
appraisal is done at 3 levels- reporting officers, reviewing officers, and
higher authority. Since each levels can countermand the previous one, the
reporting officer as the immediate supervisor feels that he has little role to
play.
-
8/3/2019 JAGRITI3
48/86
The system should be sufficiently grounded in the requirements of the
organization: It should reflect the value system of the organization. In fact,functioning as a definition of performance, it should tell the employees
what set of activities or what qualities are considered desirable by the
organization. As such it should have linkage with the job description.
The system should be both valid and reliable: The validity of rating
is the degree to which they are truly indicative of the intrinsic merit of the
employees. The reliability of rating is the consistency with which the
ratings are made, either by different raters, or by one rater at different time.
Both validity and reliability result from objectivity and bunch all their
employees in one or two top ranks without taking into account their merit.
This produces outstanding performers but not outstanding performance and
raises doubts about the validity of the system.
The system should have built-in incentive: That is, a reward should
follow satisfactory performance. Many authors, however, advocate against
a direct linkage between appraisal and rewards. In their opinion, such a
connection throttles downward communication of performance appraisal
because superiors do not like being questioned by disgruntled subordinates
in the event of an adverse appraisal.
-
8/3/2019 JAGRITI3
49/86
PERFORMANCE APPRAISAL METHOD USED AT JCT LTD
JCT uses three types of methods to Asses the performance of employees1) 160 Degree appraisals.
2) MBO
3) They use form for appraisal which is divided into two parts which
includes;
- Achievement of Objectives
-Behavioral Skills
1) In 160-degree method only seniors appraise employees. In every
department his/her superior appraises each employee.
2) MBO is another method used at JCT which consist of following steps:
-
8/3/2019 JAGRITI3
50/86
Set the Organizations Goal
Set the Departmental Goals
Discuss Departmental Goal
Define expected Results (Set Individual Goal)
Performance Review (Measure the results)
Provide Feed Back
3) They also appraise their employees through a form which is divided into
two parts
a. Achievement of objectives
b. Behavioral skills
Format of form is below:
-
8/3/2019 JAGRITI3
51/86
JCT LIMITED
PERFORMANCE
APPRAISAL
SYSTEM
-
8/3/2019 JAGRITI3
52/86
Name Of Employee Name Of Appraiser
Position/Title of Employee Position/Title of Appraiser
Division/Department Performance Period
Date hired Date PA Completed
Reviewed by Date Sign of Reviewer Date
-
8/3/2019 JAGRITI3
53/86
ACHIVEMENT OF OBJECTIVES (Please rate achievement level
of the employee vis--vis the major work objective (Not more than five) set
prior/during to the performance period based on the following rating scale:
1- consistently exceeds expectancies, 2-Often exceeds expectation, 3-
Consistency meets, 4-Inconsistency meets, 5- does not meet expectations).
S.NO OBJECTIVES/TARGETS
PERFORMANCE
RATING REMARKS
-
8/3/2019 JAGRITI3
54/86
COMPETENCIES/SKILLS REVIEW
(Please rate the competencies/skills demonstrated by the employee in the
performance of his job based on the following rating scale:
1- consistently exceeds expectancies, 2-Often exceeds expectation, 3-
Consistency meets, 4-Inconsistency meets, 5- does not meet expectations).
COMPETENCIES/BEHAVIOURAL
SKILLS RATING REMARKSCustomer Focus and Service Oriented(Responsive to customer needs, show patience inaddressing customer demands)
Communication Skills (Speaks and writes clearly andeffectively: listens well to others)
Team Spirit (Work well in team: fosters collaborationamong team members)
Creativity and Innovation (Suggests new idea: Initiatesnew ways: does not resist change
Interpersonal skills (Builds relationship with others in theopen and friendly manner, fosters respect and appreciationfor others)
Time Management (submits work demand in timelymanner, handles multiple demandsEfficiently)
Problem-Solving/Decision-making (Makes sounddecision based on logical and systematic analysis: attentionto details
Quality oriented (Sets and Delivers high Standards ofQuality output and service)
Flexibility/Stress Management (Ability to adapt to workchallenges and multiple demands: work well under pressure)
Job/Functional Knowledge (Ability to apply and developKnowledge and Skills, Self starter)
Leadership (for AGM & Above)(Provides clear direction: encourages others to achive: coaches anddevelops: plans organizes, leads and control effectively
TOTAL
-
8/3/2019 JAGRITI3
55/86
Please Note: You may use up to 5-6 relevant (as per role) competencies & skills for assessment
OVERALL RATING (Please compute the overall rating based on achievement of
objective rating and competencies/skills rating consistency. Rating scale is below:
BASIS OF PERFORMANCE FINAL RATING
Achievement of objective (Assessed by manager)
Competencies/Behavioral Skills by Manager/ Directsuperior
FINAL RATING
*Even if there is difference in assessment rating for objectives/skills &
Competencies the manager will arrive at one final rating based on his
discretion.
Consistently exceeds expectancies 1
Often exceeds expectations 2Consistency meets 3Inconsistency meets 4Does not meet expectation 5
DEVELOPMENT PLANS (Please identify and discuss with employee the knowledge,
skills abilities and competencies that the employee needs to improve on. Develop action
plans to address the developmental needs and of implementation).
DEVELOPMENTAL NEEDS ACTION PLANS
-
8/3/2019 JAGRITI3
56/86
1)
2)
3)
Name of Employee Name of Appraiser
Signature of EmployeeSignature of AppraiserDate
OTHER COMMENTS / REMARKS ( If Appraiser or employee
appraised has any comments or remarks about the process conducted,
they can be written below:)
Name of Appraiser
Signature of Appraiser Date
-
8/3/2019 JAGRITI3
57/86
DATA ANALYSIS AND
INTERPRETATION
-
8/3/2019 JAGRITI3
58/86
Q1 The purpose of appraisal is
INCREMENT 11.67%PROMOTION 0%
TRAINING & DEVELOPMENT 18.33%
ALL 68.33%
NONE 1.67%
From above graph we come across that most of employees feel it serves all three
purposes.
Q2. Do you know when you are going to be appraised next?
11.67%
0%
18.33%
68.33%
1.67%
0.00%10.00%20.00%30.00%40.00%50.00%60.00%70.00%
%age ofRespondents
1
Response
INCREMENT PROMOTION
TRAINING & DEVELOPMENT ALL
NONE
-
8/3/2019 JAGRITI3
59/86
ALWAYS 25%
OFTEN 15%
SOMETIMES 40%
RARELY 10%NEVER 10%
Above graph depicts that sometimes they know that when they are going to be
appraised next.
Q3 You are appraised by?
ONLY SENIOR 48.33%
25%
15%40%
10%10%
ALWAYS OFTEN SOMETIMES RARELY NEVER
-
8/3/2019 JAGRITI3
60/86
SENIOR & PEER 18.33%
PEER & JUNIOR 0%
SENIOR & SUBORDINATE 23.33%
SELF 10%
DO NOT KNOW 0%
Most of employees say that their seniors appraise them.
Q4 The criteria of your appraisal is?
ACHIVEMENT OF OBJECTIVES 31.67%
SUPERVISORY CAPACITY 3.33%
INTERPERSONAL RELATIONSHIPS 3.33%
BEHAVIOURAL SKILLS 3.33%
48.33%
18.33%
0%
23.33%
10%0%
0.00%
10.00%
20.00%
30.00%
40.00%
50.00%
%age ofRespondents
1
Response
ONLY SENIOR SENIOR & PEER
PEER & JUNIOR SENIOR & SUBORDINATE
SELF DO NOT KNOW
-
8/3/2019 JAGRITI3
61/86
ALL 58.33%
ANY OTHER 0%
31.67%
3.33%3.33%3.33%
58.33%
0%
0.00%
10.00%
20.00%
30.00%
40.00%
50.00%
60.00%
70.00%
1
Response
ACHIEVEMENT OF
OBJECTIVES
SUPERVISORY
CAPACITY
INTERPERSONAL
RELATIONSHIPS
BEHAVIOURAL
SKILLS
ALL
ANY OTHER
Mostly respondents say that they are appraised on all above given criteria.
Q5 The criteria is set in discussion with you?
ALWAYS 20%
OFTEN 16.67%
SOMETIMES 36.67%
RARELY 11.66%
NEVER 15%
-
8/3/2019 JAGRITI3
62/86
Above graph depicts that sometimes the criteria is set in discussion with them
Q6. Adequate time is given for meeting the targets?
ALWAYS 26.67%
OFTEN 45%
SOMETIMES 23.33%
RARELY 5%NEVER 0%
always20%
OFTEN17%
SOMETIMES
36%
RARELY12%
NEVER15%
ALWAYS
OFTEN
SOMETIMES
RARELY
NEVER
-
8/3/2019 JAGRITI3
63/86
Mostly employees say that they are often given an adequate time to meet their
targets.
Q7 Innovation and creativity is encouraged in your job?
ALWAYS 55%
OFTEN 25%SOMETIMES 20%
RARELY 0%
NEVER 0%
26.67%
45%
23.33%
5%0%
0.00%5.00%
10.00%15.00%20.00%25.00%30.00%35.00%
40.00%45.00%
%age ofrespondents
1
Response
ALWAYS
OFTEN
SOMETIMES
RARELY
NEVER
-
8/3/2019 JAGRITI3
64/86
ALWAYS,
55%
OFTEN, 25%
SOMETIMES,20%
RARELY, 0%NEVER, 0%
ALWAYS
OFTEN
SOMETIME
RARELY
NEVER
Above graph clearly shows that Innovation and creativity is always encouraged in
their jobs.
Q8 Do you think a good performance appraisal helps you in furthering your career
(better opportunities etc)?
YES 80%
NO 0%
CANT SAY 20%
ANY OTHER 0%
-
8/3/2019 JAGRITI3
65/86
80%
0%
20%0%
YES NO CANT SAY ANY OTHER
80 percent of respondents think that yes-good performance appraisal helps them in
furthering their career.
Q9 Do you think the appraisal discussion is free and fair and you are heard fully?
ALWAYS 38.33%
OFTEN 28.34%
SOMETIMES 16.67%
RARELY 8.33%NEVER 8.33%
-
8/3/2019 JAGRITI3
66/86
38.33 percent of employees feel that appraisal discussion is free and fair and they
are heard fully.
Q10 Do you feel the company takes due interest in your career development?
38.33%
28.34%
16.67%
8.33%8.33%
0.00%5.00%
10.00%15.00%
20.00%25.00%30.00%
35.00%40.00%
%age ofRespondents
1
Response
ALWAYS OFTEN SOMETIMES RARELY NEVER
ALWAYS 40%
OFTEN 28.33%
SOMETIMES 26.67%
RARELY 5%
NEVER 0%
-
8/3/2019 JAGRITI3
67/86
Above graph shows that 40 percent of employees says that the company always
takes due interest in their career development.
Q11. Do you feel friendly and effective interaction with colleagues: superior and
subordinates help in getting a good appraisal?
ALWAYS 53.33%
OFTEN 26.67%SOMETIMES 20%
RARELY 0%
NEVER 0%
40%
28.33%26.67%
5%0%
0%
5%
10%
15%
20%
25%30%
35%
40%
%age ofRespondents
1
Response
ALWAYS
OFTEN
SOMETIMES
RARELY
NEVER
-
8/3/2019 JAGRITI3
68/86
Mostly respondents feel that friendly and effective interaction with colleagues:
superior and subordinates always help in getting a good appraisal.
Q12 The periodicity of the appraisal is?
MONTHLY 0%
QUARTERLY 0%
HALF YEARLY 0%YEARLY 100%
53.33%
26.67%
20%0%0%
ALWAYS OFTEN SOMETIMES RARELY NEVER
-
8/3/2019 JAGRITI3
69/86
0% 0% 0%
100%
0%
20%
40%
60%
80%
100%
1
MONTHLY QUARTERLY HALF YEARLY YEARLY
Here in this graph we can clearly see that the periodicity of the appraisal is yearly.
Q13 Are the job responsibilities are clear to you?
YES 83.33%
NO 0%
SOMEWHAT 16.67%
-
8/3/2019 JAGRITI3
70/86
83.33%
0%
16.67%
YES NO SOMEWHAT
From above graph we come across that employees says yes job responsibilities are
clear to them.
Q14 They are conveyed to you via:
WRITTEN DOC 21.67%ORALLY BY SUPERIOR 46.67%
ORALLY BY COLLEAGUE 0%
ALL 28.33%
ANY OTHER 3.33%
-
8/3/2019 JAGRITI3
71/86
21.67%
46.67%
0%
28.33%
3.33%
0.00%
5.00%
10.00%
15.00%
20.00%
25.00%
30.00%
35.00%
40.00%
45.00%
50.00%
1
Response
WRITTEN DOC
ORALLY BY
SUPERIOR
ORALLY BY
COLLEAGUE
ALL
ANY OTHER
From this graph we come to know that superior conveys responsibilities to
employees orally.
Q15 How do you work generally?
IN TEAMS 80%
INDIVIDUALLY 6.67%EITHER WAY 13.33%
-
8/3/2019 JAGRITI3
72/86
80%
6.67%
13.33%
0%
10%
20%
30%
40%
50%
60%
70%
80%
1
Response
IN TEAMS
INDIVIDUALLY
EITHER WAY
Near about 80 percent of respondents says that they generally work in teams.
Q16 When you work in teams what do you feel individual rating is?
RIGHT 56.67%
WRONG 30%
CANT SAY 13.33%
-
8/3/2019 JAGRITI3
73/86
56.67%
30%
13.33%
0.00%
10.00%
20.00%
30.00%
40.00%
50.00%
60.00%
RIGHT WRONG CANT SAY
Response
Most of employees feel that when they work in teams individual rating is right.
Q17 What is your satisfaction level with the performance appraisal?
VERY HIGH 8.33%
HIGH 33.33%MODERATE 50%
LOW 1.67%
VERY LOW 6.67%
-
8/3/2019 JAGRITI3
74/86
Most of the employees are moderately satisfied with the performance appraisal
system of JCT.
Q18 Five years from now you see your self:
IN THE SAME COMPANY AT SAME
PLACE
15%
IN THE SAME COMPANY AT HIGHER
PLACE
50%
IN THE DIFFERENT COMPANY 8.33%
CANT SAY 26.67%
8.33%
33.33%
50%
1.67%
6.67%
0.00%
5.00%
10.00%
15.00%
20.00%
25.00%
30.00%35.00%
40.00%
45.00%
50.00%
1
Response
VERY HIGHHIGH
MODERATE
LOW
VERY LOW
-
8/3/2019 JAGRITI3
75/86
15%
50%
8.33%
26.67%
IN THE SAME COMPANY AT SAME PLACE
IN THE SAME COMPANY AT HIGHER PLACE
IN THE DIFFERENT COMPANY
CANT SAY
This reveals that most of the employees see themselves in the same company at
higher post.
FINDINGS
1. Most of employees feel it serves all three purposes i.e. increment,
promotion, training & development
2. Maximum sample suggest that its sometimes that they know when they
are going to be appraised next.
3. Most of employees say that their seniors appraise them.
4. Mostly respondents say that they are appraised on achievement of
objective, supervisory capacity, interpersonal relationship and on
behavioural skills.
-
8/3/2019 JAGRITI3
76/86
5. Its sometimes that the criteria are set in discussion with the employees.
6. Mostly employees say that they are often given an adequate time to
meet their targets.
7. Innovation and creativity is always encouraged in the jobs ofemployees.
8. Major part of the sample finds that good performance appraisal helps
them in furthering their career.
9. Most of employees feel that appraisal discussion is free and fair and
they are heard fully but in few cases they even have negative response.
10. JCT ltd always takes due interest in their career development.
11.Mostly respondents feel that friendly and effective interaction with
colleagues: superior and subordinates always help in getting a good
appraisal.
12. The entire sample says that the periodicity of the appraisal is yearly, as
in JCT ltd it is done periodically.
13.Most of sample feels that job responsibilities are clear to them.
14.Superior conveys Job responsibilities in JCT LTD to employees orally.
15.Maximum sample says that they generally work in teams in JCT ltd.
16. Most of employees feel that when they work in teams individual rating
is right.
17.Most of the employees were moderately satisfied with the performance
appraisal system of JCT ltd.
18.Most of the employees see themselves in the same company at higher
post.
-
8/3/2019 JAGRITI3
77/86
LIMITATIONS OF THE PROJECT
While conducting the survey, many deterrent have been faced which acted as a
limitation rather. Had these interventions not been there, the project would have
been a much bigger success than it has actually been. Here are some of the main
limitations: -
1. Being a private concern, the employees were hesitant to provide
information
-
8/3/2019 JAGRITI3
78/86
2. Lack of time on part of the officials of JCT LTD also restricts the
scope of research.
3. Chance of biased responses especially on the part of workers could
not be eliminated though necessary steps were taken for the same.
4. Unable to go through maximum number of employees.
5. Less duration of study.
6. Unable to get detailed information.
7. Some respondents were not co-operative
8. Some Employees were not aware about proper system of appraisal.
SUGGESTIONS
Based on the study conducted, and the observations made, the following
suggestions and recommendations are made which in my humble belief will be of
help in improving and bettering the performance appraisal system in the
organization.
1) A post appraisal interview of appraisers feedback to the appraise about
how the entire performance appraisal discussion will go a long way in
building better trust and confidence of the employees in the performance
appraisal system.
-
8/3/2019 JAGRITI3
79/86
2) Problem-solving Interview or Counseling should be made an integral part
of the performance appraisal procedure to deal with those employees who
have disagreements with or grievances over their appraisal. In such an
interview the appraiser also takes over the role of a counselor to try to finda solution to any problem which the junior may have regarding appraisal as
soon as it crops up
3) Training for appraisers:
Appraising an employee is a job, which carries great responsibility and is of
utmost importance of duties. Every superior is responsible for feedback and
appraisal and for recommendations and approval for promotions.
Hence, in more ways than one, the career graph of any employee is
dependent upon the attitude of the appraiser and the extent of his objectivity.
Therefore, to educate the appraisers about performance appraisal, it is
recommended that two-day workshop be held for them just before the
performance appraisal is due.
Not only will this workshop enhance and polish the appraisal and review skills of
appraisers, it will also educate them about the common errors that appraisers who
view their responsibility to appraise as an unnecessary additional to their
supervisory/managerial duties. A detailed two-day schedule for this suggested
training workshop for appraisers has been worked out.
4) BETTER APPROACH TO POTENTIAL APPRAISAL Performance
appraisal system has always a dual objective, visa, and employee evaluation
and employee development. Under HRD, the appraisal system lays greater
emphasis on the development of employees rather than on their evaluation.
This objective is better fulfilled by the potential appraisal system, which
tells about an employees capability to successfully assume a new role in
future following his promotion. Though it is different from performance
appraisal, which tells about an employees present performance in his
-
8/3/2019 JAGRITI3
80/86
existing job, it should be fully ingrained in the performance appraisal
system to be optimally effective.
5) After proper feedback and results of performance appraisal HR department
should go for necessary actions like increment, promotion and training etc.6) Performance management system also be improved by adopting a KRA
technique which is very successful method for appraisal
7) Before joining their jobs each trainee should be given proper induction so
that they could understand their job responsibilities.
8) Appraisal should be done half yearly for effective results.
9) Career development of employees should be given due consideration.
10) The information and the procedure of appraisal system should be
disseminated to each employee.
CONCLUSION
The management of JCT Limited is professional and tactfully managing its sales
force and the performance management system that are provided at JCT
PHAGWARA are appreciable and helpful in development of an employee. In spite
of all these successfulness of system still it require some improvement in system.
The methods of appraisal need to be revised and proper information about
performance appraisal system should be disseminated to each employee. The
congenial atmosphere should be provided to work force for effective results.
Company should also focus to the carrier development of employees. I am sure
that a company can touch more dimensions if it makes some more improvement.
-
8/3/2019 JAGRITI3
81/86
BIBLIOGRAPHY
PRASAD, L.M. PRINCIPLES AND PRACTICE OF MANAGEMENT,
Reprint 2005
GUPTA K. SHASHI, JOSHI ROSY HUMAN RESOURCEMANAGEMENT, REPRINT 2004
WWW.JCTTEXTILES.COM
KOTHARI C.R.RESEACH METHODOLOGY
WWW.GOOGLE.COM
http://www.jcttextiles.com/http://www.jcttextiles.com/ -
8/3/2019 JAGRITI3
82/86
QUESTIONNAIRE
Q1. In your opinion the purpose of appraisal is:
Increment Promotion Training and Development All None
Q2. Do you know when you are going to be appraised next?
Always Often Sometimes Rarely Never
Q3. You are appraised by:
Only Senior Senior & Peer Peer & Junior Senior & Subordinate
-
8/3/2019 JAGRITI3
83/86
-
8/3/2019 JAGRITI3
84/86
Q9. Do you think the appraisal discussion is free and fair and you are heard fully?
Always Often Sometimes Rarely Never
Q10. Do you feel the company takes due interest in your career development:
Always Often Sometimes
Rarely Never
Q11. Do you feel friendly and effective interaction with colleagues; superiors and
subordinates help in getting a good appraisal:
Always Often Sometimes Rarely Never
Q12. The periodicity of the appraiser is:
Monthly
Quarterly
Half yearly
Yearly
Q13. The job responsibilities are clear to you:
Yes
No
-
8/3/2019 JAGRITI3
85/86
Somewhat
Q14. They are conveyed to you via:
Written Doc
Orally by Superior
Orally by Colleague
All
Any other (Please Specify)
Q15. How do you work generally in?
Teams
Individually
Either way
Q16. When you work in teams what do you feel individual rating is:
Right
Wrong
Cant say
Q17. What is your satisfaction level with the performance appraisal?
Very High
High
Moderate
Low
Very low
Q18. Five years from now you see your self:
-
8/3/2019 JAGRITI3
86/86
In the same company at same place
In the same company at higher post
In the different company
Cant say
DESIGNATION\GRADE________________
YEARS OF SERVICES_________________
NO. OF TIMES APPRAISED____________