january 21, 20041 fingerprint identification biom 426 instructor: natalia a. schmid
TRANSCRIPT
January 21, 2004 2
IntroductionApplications:
- law enforcement - access to computer, network, bank-machine, car, home - security applications (US Visit)
January 21, 2004 3
Introduction
Factors in favor of fingerprint applications:
• small and inexpensive capture devices (about 100 USD); • fast computing hardware; • recognition rate meets the needs of many applications (about 1 sec); • increasing number of networks and Internet transactions; • awareness of the need for ease-of-use as an important component of reliable security
• well accepted by public
January 21, 2004 4
History• Use of fingerprints for identification since 7000 to 6000 BC by ancient Assyrians and Chinese (prints on pottery, clay, bricks). • Fingerprinting of criminals for identification ~ Babylon around 1792-1750 BC.
January 21, 2004 5
History
• In the mid-1800's two facts were established: (i) no two fingerprints have the same ridge pattern and (ii) fingerprint pattern have good permanence. • Use of fingerprints for criminal identification in Argentina in 1892.
• Henry's fingerprint classification system was introduced in 1897.
• Computer processing began in 1960s with introduction of computer hardware. • Since 1980s fingerprints are used in non-criminal applications (due to personal computers and optical scanners). • Personal use ~ due to introduction of inexpensive capture devises and reliable matching algorithms.
January 21, 2004 6
Feature Types The lines that flow in various patterns across fingerprints are called ridges and the space between ridges are valleys.
Fingerprint features (associated with some matching algorithm):
• ridge pattern - global pattern matching;
• minutiae (ridge ending and ridge bifurcation) - minutiae matching; - attributes: type, (x,y)-
location, orientation 1 and 2 are endings; 3 is bifurcation
January 21, 2004 7
Feature Types
• pore location - the finest level of detail Required resolution:
1000 dpi
• core and delta are used for classification or as landmarks;
- core is a center of pattern - delta is a point where three patterns deviate;
January 21, 2004 8
Block Diagram
Fingerprint Scanner
Quality Check
Image Enhancement
Classification
Minutia Matching
Yes
No
Database 5
Database 2
Database 1
Fingerprint Scanner
Quality Check
Image Enhancement
Yes
No
ClassificationFeature
Extraction
Feature Extraction
Off-line processing
On-line processing
Matching Score
January 21, 2004 9
Image processing
Goal: to obtain the best quality leading to the best match result.
Steps: - image noise reduction and enhancement, - segmentation, - singularity detection, - manutiae detection, and - matching.
Image specifications: - 8-bit gray scale (256 levels); - 500 dpi resolution; - (1-by-1) inch size.
January 21, 2004 10
Image EnhancementNoise in the fingerprint image is due to: dry or wet skin, dirt, cut, worn, noise of the capture device.
Two image enhancement operations: (i) the adaptive matched filter
(enhances ridges oriented in the same direction as those I in the same locality) ;
(ii) adaptive thresholding (binarization: im2bw; graythresh).
Estimation of orientation field (gradient method, slit-sums, etc.).
Local adaptive thresholding can be used (images with different contrast).
Binarized Image
Orientation Field
January 21, 2004 11
Image Enhancement
Thinning reduces ridge width to a single pixel (Matlab: bwmorph)
Preserves connectivity and minimizes the number of artifacts, e.g. erroneous bifurcations.
Conclusions:
Image processing is time consuming.
However, the results of all subsequent operations depend on the quality of image as captured and processed at this stage.
Thinned Image
January 21, 2004 12
Other image enhancement methods
Image can be divided into windows. Local ridge orientation is found for each window.
• Spatial or frequency domain processing.
• D. Maio and D. Maltoni proposed an algorithm that traces ridges and detect minutiae using grayscale image.
• Multi-resolution approach (multiple window sizes).
January 21, 2004 13
Feature Extraction
Singularity and Core Detection:
- Poincare index - local histogram method - irregularity operator - multi-resolution approach
January 21, 2004 14
Feature ExtractionEndings have one black pixel in 8-neighborhood.
Bifurcations have more than 2 black pixels in 8-neighborhood.
Noise and previous processing steps produce extraneous minutiae. They can be reduced by a thresholding method.
Example:
- bifurcation with short branch is a spur;
- two endings on a short line is line due to noise;
- two endings closely opposing is a broken ridge;
- endings at the boundary is due to projection;
January 21, 2004 15
Feature ExtractionEach minutia is described by:
- minutia type, - (x,y)-location, - minutia direction.
Minutia template - minutia with all its attributes.
Number of minutiae: from 10 to 100.
Type 1 bit
Location (each x and y) 9 bits
Direction 8 bits
Then 100 features require 2700 bits.
January 21, 2004 16
MatchingMethod 1:
- Pick a minutia in one of templates. - Compare a graph formed by its neighborhood against all possible neighborhoods in the second template. (distance between minutiae and their orientations)
Use a distance measure to calculate similarity.
Result is a match score.
Method 2: Align fingerprints using landmarks (core and delta).
Core and delta can be found using Poincare index or using estimated orientation flow.
January 21, 2004 17
Matching
Method 3: Sort minutiae in some order. Then compare ordered vectors.
Method 4: Use other features to describe minutiae (e.g. length and curvature of ridge).
Method 5: Matching on the basis of overall ridge pattern (correlation, global matching, image multiplication). Translate one image over another and perform multiplication at each pixel. Find the sum. Sum is the highest when images match.
Method 6: Perform correlation matching in frequency domain. Perform 2-D FFT; multiply two transformed images; sum multiplied values.
Correlation matching is less tolerable to noise and non-linear transformation.
Problems: translational, rotational freedom (depend on landmarks).
January 21, 2004 18
Evaluation
Measure of performance?
In stochastic estimation and detection, a typical measure is the average probability of error or, for a binary case, ROC curve.
There is no good stochastic model.
Outcomes are: match or no match.
Given a large database of labeled templates. Test the system. Count the number of erroneous decisions.
January 21, 2004 20
Evaluation
• Two fingerprint from two different individuals may produce a high Matching Score (an error);
• Two fingerprints from the same individual may produce a low Matching Score (an error)
pairsminutiaofnumberTotal
matchthatpairsminutiaofNumberScoreMatching
January 21, 2004 21
Evaluation
There are two types of error: FAR = ratio of number of instances of pairs of different fingerprints found to (erroneously) match to total number of match attempts.
FRR = ratio of number of instances of pairs of same fingerprint are found not to match to total number of match attempts.
January 21, 2004 23
Image Capture DevicesAnalog-to-Digital converter
Responsible for communicating with external devices
Reading device
• protection/encription (secure identification system) • discard fake fingerprints
Secure identification system requirements:
Additional Issues: storage for large AFIS; compression methods.
January 21, 2004 24
Fingerprint Images: ResolutionNumber of dots or pixels per inch.
Minimum resolution for FBI-compliant scanners
Minimum resolution for extracting minutiae (correlation techniques)
January 21, 2004 25
Image Capture Devices
Optical: based on frastrated total internal reflection (FTIR)
Size: 6 x 3 x 6 in. in 1970s 3 x 1 x 1 in. mid-1990s
Cost drop: $1500 - $100
Solid-state sensors: - capacitive, - pressure sensitive, - temperature sensitive
Size: 1 x 1 in. (small) Resolution: 500 dpi
Ultrasonic scanning: high quality images
January 21, 2004 26
Image Capture Devices
Fingerprint sensors can be embedded in a variety of devices for user recognition purposes.
January 21, 2004 27
Image Capture Devices
a) a live-scan FTIR-based optical scanner;
b) a live-scan capacitive scanner;
c) a live-scan piezoelectric scanner;
d) a live-scan thermal scanner;
e) an off-line inked impression;
f) a latent fingerprint
January 21, 2004 28
Available Databases
1. NIST special databases http://www.itl.nist.gov/iaui/894.03/databases/defs/vip_dbases.html
2. Fingerprint Verification Competition (FVC2000, FVC2002) http://bias.csr.unibo.it/fvc2000/
3. FBI database (>200 million fingerprints)
4. East Shore Technologies http://www.east-shore.com/data.html
January 21, 2004 29
References
1. D. Maltoni, et al., Handbook of Fingerprint Recognition, Springer, New York, 2003. 2. A. Jain, et al., Biometrics: Personal Identification in Networked Society, Ch. 2, pp. 43-64, Kluwer Acad. Pub., 1999. 3. “An Identity Authentication System Using Fingerprints,” Proceedings of the IEEE, vol. 85, no. 9, 1997, pp. 1365-1388. 4. L. Hong, Y. Wan, and A. Jain, “Fingerprint Image Enhancement: Algorithm and Performance Evaluation,” IEEE Tans. on PAMI, vol. 20, no. 8, 1998, pp. 777-789. 5. K. Karu and A.K. Jain, “Fingerprint Classification,” Pattern Recognition, Vol. 29, No. 3, pp. 389-404, 1996. 6. A.K. Jain, L. Hong and R. Bolle, “On-line Fingerprint Verification,” IEEE Trans. on PAMI, Vol. 19, No. 4, pp. 302-314, 1997.