jason urethane power transmission beltsjason2.jasonindustrial.com/jason/train.sav/urethane.pdf ·...
TRANSCRIPT
UNIFLEX BELTSManufactured in urethane with continuous helically wound steelcable cords, Jason's Uniflex beltsare ideal for situations where highstress and load demands exceedthe performance capacity of splicedbelts or where the "tooling cost" of long length or non-standardendless belts are prohibitive. Trulyendless at any length, Uniflex timing belts are suitable for allpower transmission, high speedand severe conveying applications.
Jason Uniflex belts are availablefrom 1500 to 13,000 MM lengths.See page 8
OPEN END BELTSIdeal for linear drive and indexingapplications, Jason's Urethaneopen end belts are available in avariety of sizes, pitches and colorsto meet all specifications. Beltstyles include steel or kevlar rein-forcement, as well as high load(HP) and high flexibility (HPF).Belts can be spliced to specifiedlengths.Technical data is on pages 4-6
Spliced open end belting (PAR) Nylon fabric on back side. Low friction for transport.
(PAZ) Nylon fabric tooth side for low fric-tion and noise reduction.
UNIFLEX SpecialConstructions• High flex steel cord• Nylon fabric on the teeth (PAZ)• Special back machining• Special backings available in:
PU 85 ShA, LINATEX 40 ShA, Neoprene rubber 70 ShA, Yellow PU 60 ShA, Grey PU 60 ShA and PVC
1
POLYURETHANE TIMING BELT
TIMING PULLEYS
For power transmission and linear positioning, Jason Industrial'spolyurethane timing belts aredesigned for strength, ease of useand minimum maintenance.Polyurethane timing belts are available in all popular standard and metric pitches. We stock300mm wide sleeves and can provide any required width fromstock. Kevlar tensile cord can besubstituted for steel on specialorders.Size listing on pages 3-4
Jason supplies completedrives, including metric pulleys and clamping belt plates made to standard and custom specifications. Available in aluminum or steel, Jason'spulleys are manufactured to precise tolerances to assure a perfect fitbetween belt and pulley.Available in all StandardPitches.
2
LSize length No. ofCode in teeth
AT5Size length No. ofCode mm teeth
AT10Size length No. ofCode mm teeth
XLSize length No. ofCode in teeth
MXLSize length No. ofCode in teeth
POLYURETHANE TIMING BELT
55TMXL57TMXL60TMXL70TMXL72TMXL
76TMXL79TMXL80TMXL82TMXL88TMXL
91TMXL92TMXL101TMXL102TMXL103TMXL
110TMXL114TMXL120TMXL130TMXL132TMXL
140TMXL145TMXL150TMXL155TMXL175TMXL
200TMXL256TMXL280TMXL308TMXL332TMXL
352TMXL360TMXL405TMXL412TMXL432TMXL485TMXL
4.40 554.56 574.80 605.60 705.76 72
6.08 766.32 796.40 806.56 827.04 88
7.25 917.36 928.08 1018.16 1028.24 103
8.80 1109.12 1149.60 120
10.40 13010.56 132
11.20 14011.60 14512.00 15012.40 15514.00 175
16.00 20020.48 25622.40 28024.64 30826.56 332
28.16 35228.80 36032.40 40532.96 41234.56 43238.80 485
60XL70XL80XL90XL100XL
110XL120XL130XL140XL150XL
160XL170XL180XL190XL200XL
210XL220XL230XL240XL250XL
260XL288XL290XL300XL356XL
414XL450XL566XL
6.00 307.00 358.00 409.00 45
10.00 50
11.00 5512.00 6013.00 6514.00 7015.00 75
16.00 8017.00 8518.00 9019.00 9520.00 100
21.00 10522.00 11023.00 11524.00 12025.00 125
26.00 13028.80 14429.00 14530.00 15035.60 178
41.40 20745.00 22556.60 283
AT10/500AT10/560AT10/600AT10/610AT10/660AT10/700AT10/730AT10/780AT10/800AT10/840AT10/880AT10/890AT10/920AT10/960AT10/980AT10/1000AT10/1010AT10/1050AT10/1080AT10/1100AT10/1150AT10/1200AT10/1210AT10/1250AT10/1280AT10/1300AT10/1320AT10/1350AT10/1360AT10/1400AT10/1420AT10/1480AT10/1500AT10/1600AT10/1700AT10/1720AT10/1800AT10/1860AT10/1940
500 50560 56600 60610 61660 66700 70730 73780 78800 80840 84880 88890 89920 92960 96980 98
1000 1001010 1011050 1051080 1081100 1101150 1151200 1201210 1211250 1251280 1281300 1301320 1321350 1351360 1361400 1401420 1421480 1481500 1501600 1601700 1701720 1721800 1801860 1861940 194
86L124L150L187L202L210L225L240L255L270L285L300L322L345L367L390L420L450L480L510L540L570L600L
8.63 2312.38 3315.00 4018.75 5020.25 5421.00 5622.50 6024.00 6425.50 6827.00 7228.50 7630.00 8032.25 8634.50 9236.75 9839.00 10442.00 11245.00 12048.00 12851.00 13654.00 14457.00 15260.00 160
AT5/225AT5/255AT5/280AT5/300AT5/330AT5/340AT5/375AT5/390AT5/420AT5/450AT5/455AT5/500AT5/545AT5/600AT5/610AT5/660AT5/710AT5/720AT5/750AT5/780AT5/825AT5/860AT5/975AT5/1050AT5/1125AT5/1500AT5/2000
Jason Polyurethane Belts are available in all popular standard and metric pitches. We stock 300mm wide sleeves and can provide anyrequired width from stock. Kevlar tensile cord can be substituted for steel on special orders. For sizes not listed below see page 8 fordetails on UNIFLEX truly endless belts.
REINFORCED WITH STEEL TENSILE CORD
3
225 45255 51280 56300 60330 66340 68375 75390 78420 84450 90455 91500 100545 109600 120610 122660 132710 142720 144750 150780 156825 165860 172975 195
1050 2101125 2251500 3002000 400
HSize length No. ofCode in teeth
240H270H300H330H360H
390H420H450H480H510H
24.00 4827.00 5430.00 6033.00 6636.00 72
39.00 7842.00 8445.00 9048.00 9651.00 102
PROFILE DIMENSIONS
Pitch t(mm) H1(mm) H2 (mm) W(mm) B°
T5 DL 5.0 2.2 1.2 1.8 40°T10 DL 10.0 4.5 2.5 3.5 40°
T 5 DLPitch length No. ofCode mm teeth
T 10Size length No. ofCode mm teeth
T 5Size length No. ofCode mm teeth
T 2.5Size length No. ofCode mm teeth
POLYURETHANE TIMING BELTS
NOMENCLATURE EXAMPLES150L075 15" LONG L PITCH (.375") .75" WIDE10T5/620 620mm LONG T5 PITCH (5mm) 10mm WIDE25T10/630DL 630mm LONG T10 PITCH (10mm) 25 mm WIDE, DUAL SIDED
T5/410DLT5/460DLT5/590DLT5/620DLT5/750DL
T5/815DLT5/860DLT5/940DLT5/1100DL
410 82460 92590 118620 124750 150
815 163860 172940 1881100 220
T5/120T5/150T5/165T5/185T5/200T5/210T5/215T5/220T5/225T5/245T5/250T5/255T5/260T5/270T5/275T5/280T5/295T5/300T5/305T5/330T5/340T5/350T5/355T5/365T5/375T5/390T5/400T5/410T5/420T5/425T5/430T5/440T5/450T5/455T5/460T5/475T5/480T5/500T5/510T5/525T5/545T5/550T5/560T5/575T5/590T5/600T5/610T5/620T5/630T5/650T5/660T5/690T5/700T5/720T5/725T5/750T5/780T5/815T5/830T5/840T5/850T5/860T5/885T5/900T5/940T5/990T5/1000T5/1075T5/1100T5/1160T5/1200T5/1215T5/1275T5/1280T5/1315T5/1355T5/1380T5/1440T5/1955
120 24150 30165 33185 37200 40210 42215 43220 44225 45245 49250 50255 51260 52270 54275 55280 56295 59300 60305 61330 66340 68350 70355 71365 73375 75390 78400 80410 82420 84425 85430 86440 88450 90455 91460 92475 95480 96500 100510 102525 105545 109550 110560 112575 115590 118600 120610 122620 124630 126650 130660 132690 138700 140720 144725 145750 150780 156815 163830 166840 168850 170860 172885 177900 180940 188990 198
1000 2001075 2151100 2201160 2321200 2401215 2431275 2551280 2561315 2631355 2711380 2761440 2881955 391
T2.5/120T2.5/145T2.5/160T2.5/177T2.5/200
T2.5/230T2.5/245T2.5/265T2.5/285T2.5/305
T2.5/317T2.5/330T2.5/380T2.5/420T2.5/480
T2.5/500T2.5/600T2.5/650T2.5/680T2.5/780
T2.5/880T2.5/915T2.5/950T2.5/1185
120 48145 58160 64177.5 71200 80
230 92245 98265 106285 114305 122
317.5 127330 132380 152420 168480 192
500 200600 240650 260680 272780 312
880 352915 366950 380
1185 474
T10/260T10/340T10/370T10/390T10/400T10/410T10/440T10/450T10/480T10/500T10/530T10/560T10/600T10/610T10/630T10/660T10/680T10/690T10/700T10/720T10/730T10/750T10/780T10/810T10/840T10/880T10/890T10/900T10/910T10/920T10/950T10/960T10/970T10/980T10/1010T10/1050T10/1080T10/1100T10/1110T10/1140T10/1150T10/1200T10/1210T10/1240T10/1250T10/1300T10/1320T10/1350T10/1390T10/1400T10/1420T10/1440T10/1450T10/1460T10/1500T10/1560T10/1600T10/1610T10/1700T10/1750T10/1780T10/1880T10/1960T10 /2250
260 26340 34370 37390 39400 40410 41440 44450 45480 48500 50530 53560 56600 60610 61630 63660 66680 68690 69700 70720 72730 73 750 75780 78810 81840 84880 88890 89900 90910 91920 92950 95960 96970 97980 98
1010 1011050 1051080 1081100 1101110 1111140 1141150 1151200 1201210 1211240 1241250 1251300 1301320 1321350 1351390 1391400 1401420 1421440 1441450 1451460 1461500 1501560 1561600 1601610 1611700 1701750 1751780 1781880 1881960 1962250 225
DUAL PROFILE (DL)
Jason can ship any required width from stock,
usually within24 Hours
4
T 10 DLSize length No. ofCode mm teeth
T10/260DLT10/530DLT10/630DLT10/660DLT10/720DL
T10/840DLT10/980DLT10/1210DLT10/1240DLT10/1250DL
T10/1320DLT10/1350DLT10/1420DLT10/1610DLT10/1880DL
260 26530 53630 63660 66720 72
840 84980 981210 1211240 1241250 125
1320 1321350 1351420 1421610 1611880 188
Pitch .875"
Width, Inch 075 100 150 200 300 400
Allowable Tensile Load lb. 600 820 1260 1800 2750 3600Breaking Strength lb. 2100 2800 4300 6000 9300 12300
DIMENSIONAL & LOAD DATA
STEEL OR KEVLAR REINFORCED
Sold in rolls in the widths indicated below. Minimum order is 50 ft. Other widths are available. Belts can be spliced to anylength required. For truly endless belts see page 9.
Pitch .200"
Width, Inch 025 031 037 050 075 100
Allowable Tensile Load lb. 40 50 70 90 150 200Breaking Strength lb. 130 150 200 300 500 670
Pitch .375"
Width, Inch 037 050 075 100 150 200
Allowable Tensile Load lb. 140 210 330 460 700 800Breaking Strength lb. 400 660 1000 1350 2200 3000
Pitch .500"
Width, Inch 050 075 100 150 200 300 400
Allowable Tensile Load lb. 260 450 580 840 1180 1680 2350Breaking Strength lb. 820 1400 1800 2600 3700 5700 7400
5
POLYURETHANE OPEN END TIMING BELT
Standard ConstructionsPolyurethane - Steel cord Kevlar also available
Open End BeltingRolls 100m LongMinimum order 50 ft.
Spliced BeltsFor all pitches, the minimum length is 900 mm.For Spliced Belts reduce Allowable Tensile Load by 50%
Special Constructions- Nylon fabric on the teeth, type PAZ- Nylon fabric on the back, type PAR- Nylon fabric on the teeth, and on the
back type PAZ/PAR- High Abrasion resistance and special
thickness- FDA approved Polyurethane- Non-Standard Widths
XL
XH
H
L
Pitch 10 mm
Width, mm. 16 20 25 32 40 50 75 100
Allowable Tensile Load N 1630 2000 2560 3370 4200 5230 8260 10420Breaking Strength N 5110 6400 8040 10600 13200 16450 25960 32900
Pitch 10 mm (Wide Tooth)
Width, mm. 25 32 50 75 100
Allowable Tensile Load N 3360 4880 8050 12200 16600Breaking Strength N 12450 16600 27400 41500 56500
Pitch 20, mm
Width, mm. 25 32 50 75 100
Allowable Tensile Load N 3360 4880 8050 12200 16100Breaking Strength N 12460 16620 27430 41560 54860
Pitch 20 mm (Wide Tooth)
Width, mm. 25 32 50 75 100
Allowable Tensile Load N 6020 7400 12040 18050 25000Breaking Strength N 19630 24160 39270 58900 81560
Pitch 5 mm
Width, mm. 6 8 10 12 16 25 32
Allowable Tensile Load N 190 250 305 400 660 985 1290Breaking Strength N 570 760 915 1100 1830 2975 3890
Pitch 5 mm (Wide Tooth)
Width, mm. 10 16 25 32 50
Allowable Tensile Load N 630 1260 2050 2680 4255Breaking Strength N 11960 3920 6370 8330 13320
6
POLYURETHANE OPEN END TIMING BELTT5
AT5
T10
AT10
T20
AT20
Pitch 8 mm
Width, mm. 10 20 30 50 85 100
Allowable Tensile Load lb. 275 650 985 1800 3125 3730Breaking Strength lb. 930 2250 3360 6160 10650 12700
Pitch 5 mm
Width, mm. 10 15 25 50
Allowable Tensile Load lb. 140 265 460 950Breaking Strength lb. 440 825 1430 3000
Pitch 14 mm
Width, mm. 25 40 55 85 100
Allowable Tensile Load lb. 1350 2080 2600 4200 5600Breaking Strength lb. 4400 6800 8500 15200 18350
5 MM
8MM
14MM
7
Vee Guide
POLYURETHANE OPEN END TIMING BELT (Cont’d)
Timing belting with Vee Guide center section.White polyurethane with steel cord. Open end or spliced to order.
20TG525TG532TG550TG5
50TG1075TG10100TG10
50TG2075TG20100TG20
50ATG1075ATG10100ATG10
150HG200HG300HG400HG
6mm6mm6mm6mm
AAA
AAA
AAA
AAAA
Available Sizes Vee Guide
Nylon Fabric on teeth (PAZ) and/orback (PAR) available on specialorder for Vee Guide & TS sections.Also available with 2mmpolyurethane extra backing. FDA construction on special order.
VEE GUIDE
TYPE TS20mm pitch and 20mm wide timing belt center sectionWhite poltyurethane with steel cord. Open end or spliced to order.
50TS 2075TS 20100TS 20
Available SizesWidth of Belt
20MM
Width (mm)PITCH 6 10 12 16 20 25 32 50 75 100
T5 0.015 0.025 0.030 0.040 0.050 0.065 0.080 0.130T10 0.053 0.054 0.072 0.106 0.133 0.144 0.256 0.398 0.530T20 0.200 0.250 0.400 0.600 0.800
AT5 0.018 0.130 0.036 0.048 0.060 0.075 0.096 0.150AT10 0.097 0.125 0.150 0.190 0.300 0.450 0.600AT20 0.270 0.350 0.550 0.800 10100XL 0.019 0.022 0.027 0.036 0.055 0.073 0.110 0.145L 0.040 0.054 0.080 0.109 0.164 0.216H 0.067 0.100 0.130 0.200 0.265 0.397 0.530
XH 0.250 0.380 0.500 0.750 1.000025 031 037 050 075 100 150 200 300 400
PITCH 6 10 12 16 20 25 32 50 75 100T5 10 20 30 40 45 60
T10 45 70 85 135 205 270T20 135 170 270 400 550AT5 25 40 60 80AT10 135 170 270 400 550AT20 480 650 975 1300XL 3 4 5L 5 7 10 13H 8 12 16 25 30 50 65
XH 100 150 220 300025 031 037 050 075 100 150 200 300 400
Width (inch)
WIDTH AND THICKNESS TOLERANCES
Tolerances for belt Tolerance forPITCH width nominal thicknesss
APPROXIMATE BELT WEIGHT (kg/m)
(Kg/m x .67 = Lb/Ft)
Width (inch)
Width (mm)
NEWTONS
POUNDS
MEASURING LOAD FOR OPEN END BELTING (F)
Length Tolerance + 0.8 mm/meter+ 0.009"/ft
Length Checking Method8
TOLERANCES AND WEIGHTS
Note: 1 newton= .2248 lb. force
T5T10T20AT5AT10AT20XLLH
XH
+ 0.5 mm+ 0.5 mm+ 1.0 mm+ 0.5 mm+ 0.5 mm+ 1.0 mm+ .020" + .020"+ .030"+ .040"
+ 0.15 mm+ 0.30 mm+ 0.45 mm+ 0.20 mm+ 0.30 mm+ 0.45 mm+ .010"+ .010"+ .012"+ .020"
The fixing plates are used to fasten the ends ofopen belting. On the customer’s request, theplates can be delivered with or without fixingholes. The plates are delivered in aluminum alloy.Consult Jason for pricing
H(Urethane Flat Belting with steel-cable reinforcement)
STANDARD WIDTH MM
H (MM) 1 2
P1
10
20
P2
25
50
75
100
P2 P2 P3
3
P3
25
50
UNIFLEX Truly Endless Belts - Any Length
Urethane Timing belts constructed with Steel Cable cords produced to any length without requiring a mold. Helically wound steeltension members provide ideal performance in continuous operation where maximum working loads and speeds to 10,000 rpm’sare called for.
Now Available (X)
Belt Width
037X
10X
10X
X
(inch)LH
XH
(mm)8mm
(MM)T5T10T20AT5AT10AT20
050XX
20X
12XX
X
075XXX
30X
16XXXXXX
100XXX
50X
20XXXXXX
150XXX
85X
25XXXXXX
200XXX
100X
32XXXXXX
300XXX
50XXXXXX
400XXX
60
XX
XX
75XXXXXX
100XXXXXX
150
X
XX
Available Length - Min. 1500mm (59”). Max. 13,000 (511.8”)Maximum Width - 150mm (5.9”)
9
FIXING PLATES FOR INCH PITCH BELTS (mm)
TYPE F d B A S
XL 6 5.5 3.5 42.5 8
L 8 9 5 76.6 15
H 10 11 9 106.9 22
Belt Width (inch)C025 037 050 075 100 150 200 300 400
25.5 28.5 32 38 48
36 39 45 51.5 64 77
45 51 57.5 70 83 108 134
FIXING PLATES FOR METRIC PITCH BELTS (mm)
TYPE F d B A S
T5-AT5 6 5.5 3.2 41.8 8
T10-AT10 8 9 5 80 15
T20-AT20 10 11 10 160 20
Belt Width (inch)C6 10 16 25 32 50 75 100
25 29 35 44 51 61
41 50 57 75 100 125
56 65 81 106 132
FIXING PLATES FOR HTB PITCH BELTS (mm)
TYPE F d B A S
5m 6 5.5 3.2 41.8 8
8m 8 9 5 66 15
14mm 10 11 9 116 22
Belt Width (inch)C10 15 20 25 30 40 50 55 85 100
28 34 44 61
35 40 45 55 75 110 125
56 71 86 116 132
OPEN END FLAT BELTING
FIXING PLATES
SPECIAL PROFILES
Power Transmission BeltsCatalog JB-7
Accu-Link Belts Catalog AL-4
Industrial Hose & Couplings
Catalog HC-5
JASON PRODUCT CATALOGS
Jason Urethane belts can be made upwith a variety of welded-on profiles to handle your specific application.These profiles can be used a indexersacuators, carriers or pushers. Theycan provide accuracy to assembly,packaging and inserting operations.Custom profile designs are possible.
We recommend that the profile pitchS be a multiple of the belt’s toothpitch. This will minimize cumulativepositioning error. The weld-on accu-racy is ± .020” (± .5 mm) for eachprofile, noncumulative. Profile heighttolerance is + 000”. Normally a smallweld bead will be visible at the baseof the profile. The radius of this beadis .020”-.040”. This bead is removable, if necessary.
–.020”
Belts with Special Profiles
10
JASONURETHANE
POWERTRANSMISSION
BELTS
Corporate OfficeCentral WarehouseJason Industrial Inc.340 Kaplan DriveFairfield, NJ 07004973-227-4904FAX 973-227-1651
Branch Officesand WarehousesJason Illinois, Inc.258 Westgate DrivePOB 87288Carol Stream, IL 60188630-752-0600FAX 630-752-0680
Jason Industrial Inc.3236 Royalty RowIrving, TX 75062972-438-6992FAX 972-721-9162
Jason Industrial Inc.3724 East 26th StreetLos Angeles, CA 90023323-265-8061FAX 323-265-0813
Jason Industrial Inc.1212 N. 39th St. STE 218Tampa, FL 33605813-241-4111FAX 813-241-4212
Jason Do Brasil LtdaRua Santa Escolastica NR 120SorocabaSao Paulo, Brasil 18051-380005515 2220007FAX 005515 2227565
Jason Industrial Canada Ltd.9135 Cote De LiesseDorval, Quebec H9P-2N9514-631-6781FAX 514-631-7408
Jason Industrial Canada Ltd.927 Matheson Blvd, EastMississauga, Ontario L4W-2R7905-602-4400FAX 905-602-4406
Jason Industrial Canada Ltd.4242 99th St. (Gretzky Street)Edmonton, Alberta T6E-5B3780-461-4400FAX 780-461-1034
Jason Industrial, S. De R.L. De C.V.AV. Ceylan No. 959 Bodega 36Col. Industrial Vallejo C.P. 02300Azcapotzalco, Mexico D.F.005255873680/5873785/5877374FAX 005255873688
www.jasonindustrial.comContact us at [email protected]
All recommendations for the use of the products described herein and all other data or information set forth in this publication, whether concerning such products orotherwise, are furnished without any guarantee, warranty representations or inducement of any kind whether express or implied, including but not limited to impliedwarranties of merchantability and fitness for a particular purpose. And Jason expressly disclaims liability under any theory, including without limitation, contract negli-gence, misrepresentation or breach of any obligation relating to the recommendation, data or information set forth herein. Readers and customers are encouraged toconduct their own test before using any product. Read its label and all related instructions. The information in this publication is not intended as permission or recom-mendations to practice a patented invention without permission of the patent owner.
Catalog UB-4 © Copyright 2002 Jason Industrial, Inc. Printed in USA