Jayson Battaglia75 Deckertown Turnpike Montague, NJ 07827 (845)-754-3373 jab2331@columbia.edu

EDUCATIONMS, Electrical Engineering (3.33/4.0) Expected Dec 2013Columbia University, New York, NY Relevant Coursework: Analog Circuits, Advanced Analog Circuits, Analog Systems in VLSI, Microwave Circuit Design, Digital Signal Processing, Detection and Estimation Theory, Digital Controls, Control Theory, Mechatronics/Embedded Microcomputer Controls

PROJECT EXPERIENCE (all at Columbia University)16b, 22 kHz Delta Sigma Modulator (DSM) (Analog Systems in VLSI) Jan. May 2013

Calculated oversampling rate, noise transfer function (NTF), SNR, and simulated noise power in MATLAB Used NTF to simulate a second-order architecture and output of DSM with Simulink Designed second-order DSM circuit in Virtuoso along with a NAND-logic, non-overlapping clock source Determined PSD in both MATLAB and Virtuoso and plotted input signal versus SNR to targeted 98 dB

5-kHz Sample-and-Hold OTA Circuit (Advanced Analog Circuits) Jan. May 2013 Developed sample-and-hold circuit based upon quantitization noise and Nyquist sampling frequency; charge

injection and time constant used to determine transistor parameters Designed OTA on the basis of necessary gain (80 dB) corresponding to required gain of 4 at Nyquist frequency

and unity gain bandwidth of 10 kHz, with phase margin of 60o for stability Driven with non-overlapping clocks formed by custom-made NAND-logic transistor layout Calculated of figure of merit, SINAD, power, and performance around PVT corners in Virtuoso

Photodiode TIA for Fiber Optics Networks in 0.13m CMOS (Analog Circuits) Sep. Dec. 2012 Designed entire circuit: mirroring of 50 A source biasing, multi-CS gain stages (3k), and shunt-shunt feedback Tailored circuit in PSPICE to be robust against changes in temperature and voltage source variation while still

meeting specs of 30 mW power consumption, 40 ps group delay variation, and 300 uA max current linearityTwo-Stage LNA for 12G Police Radar Application (Microwaves) Jan. May 2012

Optimized for targeted insertion gain and minimal reflection gains while keeping the noise figure below 1.1 dB through use of correct biasing and impedance matching techniques

Performed determination of passives with Smith charts Simulated S-parameters and circuit schematic in ADS to achieve project goals

WORK EXPERIENCER&D Lab Technician, Balchem Corporation Nov. 2009 present

Modified programming of commercial apparatus via designed circuit in order to achieve desired testing protocol Wrote technical documents concerning laboratory procedures of measuring and quantifying activity and release Reviewed and followed SOPs to maintain GMP/ GLP compliance in the pilot plant Performed field testing of pharmaceutical encapsulates to ensure goals were met for customers standards Controlled ordering for R&D through communication with Accounting and Operations

R&D Lab Technician, Lightening Energy Sep. 2007 Oct. 2009 Developed circuits to automate automotive battery testing: charge-discharge cycling, multiplexing to allow for

testing of multiple battery cells, overvoltage protection, modification to work in tandem with battery management system (BMS) boards, capacity determination

Employed principles of circuit design through SPICE simulation and breadboarding Constructed circuit boards from layout editor using custom-made symbols and packages Etched and milled boards for component and circuit specs, soldered components, and created user interfaces Debugged prototype circuits and made customized editions to work with off-shelf BMS modules Automated generation of imperative data during nights and weekends crucially needed for funding requirements,

and freed up monitoring labor during the workday through the use of self-developed circuitry

TECHNICAL SKILLSProgramming: C, C++, Visual C++, BASIC, Assembly, MPLAB IDE (Microchip) with PIC Microcontrollers, HyperterminalCircuit Design/CAD Layout: PSPICE (Cadence Spectre/Virtuoso, Agilent ADS), MATLAB/Simulink, Eagle PCB Layout EditorOther: PCB fabrication, table saw, band saw, drill press, soldering iron, multimeter, oscilloscope, Office suite

Bokai Chen

bc2526@columbia.edu 1966 1st Ave., APT 2f, New York, NY, 10029 1-917-868-5947

EDUCATION

Columbia University, Fu Foundation School of Engineering and Applied Science New York, NY

MS in Electrical Engineering, GPA 3.43/4.0 Expected in December 2013

Shanghai Jiao Tong University, School of Microelectronics Shanghai, China

BS in Electrical Engineering, GPA 3.5/4.0 June 2012

SELECTED COURSE DESIGNS

Columbia University New York, NY

Measurement of Performance Fluctuation with Cache Flush in Multicore CPU Feb. 2013 - May. 2013 Adapted inline x86 assembly to execute accurate L1 cache line flush in C++ program Designed a multithread Gaussian elimination program capturing the variation as a performance testbench Accessed to Intel CPU clock cycle counter from virtual hardware to get precise count which will be used in the performance measurement for

computer architecture improvement analysis.

VLSI Design for a low power Architecture: a Processor with Accelerators Feb. 2013 - May. 2013 Enhanced MIPS instruction set to deploy accelerators for high performance calculation Built IEEE 754 floating point FFT module from Verilog RTL code to Place&Route, using 130nm technology Utilized Perl/bash scripts to do simulation and timing & power analysis with our C test bench on an audio sample

FPGA: Killswitch the high speed hardware firewall Feb. 2013 - May. 2013 Targeted at filtering and capture packets at 10Gb/s Built Avalon ST interfaces of killswitch module for connection to Solarflare Board Service Filtering one packet with CAM based structure to calculate statistic data in several cycles (< 200ns)

A Network-On-Chip System Aug. 2012 - Dec. 2012 Built a 4x4 mesh network in SystemVerilog. Routers achieved Y-X dimension-ordered and credit based wormhole routing Applied golden brick to do 10k random tests to guarantee the correctness Successfully synthesized with Design Compiler. Adjusted the design to meet the timing and area constraints.

Shanghai Jiao Tong University Shanghai, China

A multithread C Internet Information Server Mar. 2011 - Jun. 2011 Coded in C providing network function with TCP/IP socket, multithread using pthread and setup file configuration Functions including several Linux commands (pwd, ls) via telnet provided to multiple client access. Avoided multithread data harzard using locks (mutex).

A 32 bit Pipeline Mips CPU Mar. 2010 - Jun. 2010 Implemented optimizations including FORWARD to achieve better CPI Coded in Verilog, verified with several testbenchs and synthesized in ISE

RESEARCH EXPERIENCE

Embedded System Design for Portable Bio-Electrochemistry Sensor April. 2010-April.2011 Programmed the control software in C# for the device running on PC Designed multi-channel mode with data verification

SKILLS Programming Languages: asm, C, C++, C#,Verilog, SystemVerilog, VHDL, Java,Perl Engineering Tool: Modelsim, Xilinx ISE, Hspice, Multisim, Quartus, Matlab Operating Systems: Windows, Linux Documents: Word, PowerPoint, Excel Languages: Chinese(Native speaker), Japanese(N2)

ACTIVITIES Aug. 2009 Jul. 2012 Forum Moderator, software board in online forum for SJTU

Held several themed parties offline Daily management

mailto:bc2526@columbia.edu

Jiawei Chen +1(917)8682137 jc3960@columbia.edu

Education Columbia University, New York City, US Sep.2012 Present M.S., Electrical Engineering GPA: 3.88/4.0 expected in Feb. 2014 Tsinghua University, Beijing, China Sep.2008 Jun. 2012 B.S., Electronic Engineering GPA: 88.7/100 Research Experience Digital Video and Multimedia Lab, Columbia University Jul.2013-Present Multimedia Event Detection and Recounting Discovered multimedia event concepts from tagged web images. Trained visual models using images in respect to each concept and applied these models on videos for retrieval and recounting tasks Our team won 1st/2nd places in all tasks of TRECVID 2013 contest

Microwave and Antenna Institute, Tsinghua University Jan.2012- Jun.2012

Bachelors Thesis: Analyses of RFID Performance based-on Tagformance Conference Papers Under Review Automatic Design of a Large Concept Bank for Representing Events in Video Yin Cui, Dong Liu, Jiawei Chen, Shih-Fu Chang submitted to IEEE Conference on Computer Vision and Pattern Recognition (CVPR), 2014 Event-Driven Semantic Concept Discovery by Exploiting Weakly Tagged Internet Images Jiawei Chen, Yin Cui, Dong Liu, Guangnan Ye, Shih-Fu Chang submitted to IEEE International Conference on Multimedia Retrieval (ICMR), 2014 Selected Coursework In Columbia Statistical Machine Learning, on going Linear Regression Models, A Graph Theory, A Network Science, A Topics in Information Processing: Visual Recognition and Search, A (Couse Project: Fusing Descriptors for Action Recognition in Videos) In Tsinghua Digital Image Processing, 86/100 Data Structures, 83/100 Research Interests Computer vision, social multi-media, data analysis, machine learning Computer Skills C/C++, Matlab, R, python Honors Wei Family Private Foundation Scholarship, Columbia University Fall 2013

T . H A N J O H N C H I A N G

1 8 W 1 0 8 T H S T A P T 5 D N E W Y O R K , N Y 1 0 0 2 5 P H O N E 9 1 7 - 5 2 0 2 8 4 8 E M A I L C H I A N G 2 2 5 @ G M A I L . C O M

EDUCATION Columbia University in the City of New York New York, New York Master of Science in Electrical Engineering, GPA: 3.37/4.0 Projected December 2013 The University of Wisconsin at Madison Madison, Wisconsin Bachelor of Science in Electrical Engineering, GPA 3.23/4.0 May 2011 CITIZENSHIP PERMANENT RESIDENT of the USA Citizen of Taiwan PROJECT AND INTERNSHIP EXPERIENCE Taiwan Life Insurance Co., Ltd Taipei, Taiwan Summer Intern July 2013-August 2013 Risk Management: security pricing and value at risk computing Investment: equity trading program design

National Chiayi University Chiayi, Taiwan Research Assistant October 2011-May 2012 A Comparison of Separate and Concurrent Calibration Under Multidimensional Item Response Theory Models Using Markov chain Monte Carlo method to calibrate large-scale assessment in educational testing applications. The University of Wisconsin at Madison Madison, Wisconsin Undergraduate Research Assistant February-May 2011 Construction of a Small Wind Turbine

Designed the electrical control system and buck convertor of a wind turbine. TECHNICAL AND PERSONAL SKILLS Mathematics and Science Financial economics, micro and macroeconomics theory, econometrics, Markov chain

Monte Carlo simulation, partial differential equations, stochastic process, vector calculus, complex calculus, linear time invariant and varying (LTI and LTV) systems, nonlinear systems, state space system and solid state physics.

Programming Languages Proficient in MATLAB and Bloomberg. Experienced C++, Java, R and Microsoft SQL. Languages Fluent in English and Chinese

Wei Dai 520 West 123rd St. Apt 3E, New York, NY10027

917-561-3977 davysjtu@gmail.com Education Columbia University, The Fu Foundation School of Engineering and Applied Science New York, NY MS in Electrical Engineering, Concentration: Communication and Networks, GPA: 3.5608 Expected December 2013 Courses: Analysis of Algorithms I, Computer Networks, Networking Laboratory, Digital Communications, Computer Communication Networks, Principles 4G Wireless, MIMO Wireless Communication, Speech Recognition. Shanghai Jiao Tong University, School of Biomedical Engineering Shanghai, China BS in Biomedical Engineering, GPA: 3.4 June 2012 Royal Institute of Technology, School of Technology and Health Stockholm, Sweden Undergraduate Students Exchange Program January 2012 - June 2012 Project Experience Columbia University New York, NY Online Bidding System November 2012 Developed an online bidding system using Java language in Computer Networks course. The system mainly implemented TCP protocol and socket programming which performs like eBay. Speech Recognition Projects September 2012 - December 2012 Completed four speech recognition projects using C++ language. The projects involved some models and functions in this area like dynamic time warping, Hidden Markov models, language models and Verterbi algorithm. Royal Institute of Technology Stockholm, Sweden Using Signal Processing in ultrasound cardiac tissue curves to separate different groups January 2012 - June 2012 Tested the characteristic of frequency components of ultrasound cardiac tissue curves from different kinds of people using FFT (Fast Fourier Transform) and PCA (Principle Components Analysis) in MATLAB. Found two models to differentiate people having different characteristics in their ultrasound cardiac tissue curves. The Fifteenth PRP project of Shanghai Jiao Tong University Shanghai, China Quantitative research for registration method of the constant feature of medical image September 2009 - January 2010 Studied basic medical image processing algorithms and wrote some functions of image processing in C++ language Internship Experience ICAP North America, EBS Group Parsipanny, NJ QA Intern June 2013 - December 2013 Maintained a single function library and an object repository Developed automation scripts for basic functions validation based on available Global Access Framework using VBScript language Skills Applications: MS Word, Excel, PowerPoint, MATLAB, and LabVIEW Computer Languages: Java, C/C++, VBScript, JavaScript, Python, SQL, LaTex and Assembly language Operating Systems: Windows, MAC OS, UNIX/LINUX Spoken Languages: Fluent in Chinese (Mandarin) and English Leadership and Activities President Assistant, Students Union of SJTU, Shanghai, China September 2010 - March 2011 Director, International Students Center of Students Union of SJTU, Shanghai, China September 2009 - June 2010 Volunteer, 2010 Shanghai World Expo, China October 2010 Organizer, New Energy, New City, New Life-2010 Global Forum for College Students, Shanghai, China July 2010 Organizer, Qiaofu summer camp for Mainland and Taiwan students, Shanghai, China July 2010 Honors Outstanding Graduate of SJTU (Top 3%), Shanghai, China June 2012 Three goods Student of SJTU (Top 3%), Shanghai, China November 2010 Star of Volunteer in 2010 Shanghai World Expo, Shanghai, China October 2010

QIUSHI DING 1966 1st Avenue, Apt 2F, New York, 10029 | (917) 868-5930 | qiushi.ding@gmail.com

Specializing in NETWORK & COMMUNICATION techniques and EMBEDDED SYSTEM development.

EDUCATION

Columbia University, the Fu Foundation School of Engineering and Applied Science, New York, NY

Master of Science, Electrical Engineering, Expected by December 2013.

Shanghai Jiao Tong University, The school of Electronic, Information and Electrical Engineering, Shanghai

Bachelor of Science, Information Engineering, July 2012.

TECHNICAL EXPERIENCE

Networking Laboratory -- Laboratory Partner

Columbia University Sept. 2013 ~ Dec. 2013

Investigated and analyzed various protocols through all five layers of network using Linux PCs and Cisco IOS routers. Worked

with command line (on both PCs and Routers) and WireShark packet capture to set up and observe experiments related to the

following protocols: ARP, TCP/UDP, RIP, OSPF, BGP, etc. The laboratory also includes operation and manage of various

application: DNS, WiMAX, telnet, ftp, etc.

Incremental Development of FPGA & Embedded Linux on Altera Stratix V -- Independent Worker

Columbia University Jun. 2013 ~ Jul. 2013

Initiate logic lock of given Solarflare FDK; reduced compilation time from 4 hour to 2 hours.

Hardware-Based Line-Rate Filtering of 10Gb/s Ethernet Traffic -- Project Leader

Columbia University Feb. 2013 ~ May. 2013

Developed and designed FPGA based implementation for monitoring TCP sessions in relation to financial systems; project was

built on Solarflare AOE (Altera Stratix V). System included a kill switch to immediately halt network traffic when dangerous

scenarios arose. Designed top-level system, built Avalon ST interfaces for kill switch module to interact with Solarflare Board

Service.

Mobile IPv6 Operation on Ubuntu OS -- Laboratory Teaching Assistant

Shanghai Jiao Tong University Feb. 2012 ~ Jul. 2012

Tested TCP/UDP transmission for a Linux application using Mobile IPv6 protocol. This was used for maintaining network

connection while the topological structure changed.

Movement Sensor Application with ST Sensor Chip iNEMO -- Project Leader

Shanghai Jiao Tong University Sept. 2012 ~ Nov. 2012

Designed and implemented an entire motion sensor system, including a TCP-based protocol for transmission of data from the

accelerometer on the iNEMO multi sensor system. Project included C# UI development, TCP server and client development, and

RS232 serial port implementation.

Sensor Glove system with FPGA (Altera DEII) -- Project Partner

Shanghai Jiao Tong University Sept. 2012 ~ Dec. 2012

Developed SOPC system controlling CMOS camera with real time pattern recognition.

TECHNICAL STRENTHS

Platforms: Linux (Opensuse, Redhat & Ubuntu), Windows

Tools: Quartus 12.1, MATLAB, Github, Android SDK, Solarflare FDK, Modelsim, LabView Languages: VHDL, C/C++, JAVA, C#

Protocols: TCP/IP, FIX, HTTP, UDP

Hardware: Altera DE II, Stratix V, Solarflare AOE

Luning Gao (718) 483-6173 luninggao0205@gmail.com

EDUCATION

Columbia University in the City of New York New York, NY

M.S. in Electrical Engineering 3.2/4.0 Expected Dec. 2013

Beijing University of Posts and Telecommunications Beijing, China

B.S. in Computer Engineering with Management 3.5/4.0 2008-2012

EXPERIENCE

Accenture Jun. -Aug.2013

Analyst

Oil & Gas Production Internet of Things System (Program A11 and also involves A5 and A8)

Assisted in strategize and design Oil & Gas production system. Gathered business requirements and wrote business requirement specification. Surveyed digital smart sensors in market for intelligent instruments to fit system. Specified data distribution for all models and data storage for databases at all levels.

Lenovo Summer,2012

Software Developer

Internal Resources Sharing System for Enterprises

Developed a client-side application by JAVA can download files from server. Configured and developed the connection by ODBC driver and transmission files between client and server. Constructed the database of file information by MS Access.

IBM Global Business Service Winter,2012

Business Analyst

Technology service for ERP System Developing

Analyzed the high availability of ERP system. Assessed the risk of ERP system implementation.

PROJECT

Sign Language Recognition System Spring,2013

As the team leader to develop a system translate gestures captured by Webcam to display corresponding letters. Implemented image processing and detection by Sobel Operator and SIFT algorithm and MK-RoD algorithm. Built the database of American Finger Spelling Alphabet. Applied the system into a new application which can setup password by hand gestures.

Health & Fitness Gym Website Fall, 2012

Developed a web application including join, schedule arrangement, training selection and user management. Used Web front-end design via JAVA and JSP interact with the database server by using JDBC, and return HTML. Developed SQL queries in DB2 to extract, validate and test and built the database by Oracle. Realize the data transmission and configured web server on Apache/Tomcat.

Twitter User Data Mining Winter,2012

Accessed twitter users data via twitter API by JAVA. Identified communities of users by Greedy Algorithm and Kamada Kawai Algorithm.

Found potential link and relationship between unlinked users. Visualized and constructed the relationship diagram of users.

Golden Panda Puzzle Game Software Spring,2011

Developed the game software including three games by JAVA for children. Three games: Boxman (push box), Gomoku (five in a row), and Hanoi Towers.

Sommelier Embedded Microprocessor Optimization Fall,2012

Optimized the matrix multiplication algorithm by C language. Exploited Instruction-Level Parallelism (ILP) and Thread- Level Parallelism (TLP) to its best.

AWARDS

First Class Honor, Queen Mary, University of London 2012

National Scholarship, Beijing University of Posts and Telecommunications 2011

SKILLS

Java/JSP, C/C++, SQL, PHP, R, Matlab, HTML, Linux

English (fluent), Chinese (native).

Kuang Gu Columbia University

gk2355@columbia.edu +1 347 940 9328 (US Mobile) +86 15810710597 (China Mobile) Education Sep, 2008- Jul , 2012 Aug, 2010- Dec, 2010 Sep, 2012- Now

Tsinghua University BEIJING, CHINA Department of Electronic Engineering, Electronic Information Engineering Core courses: Signals and Systems; Data Structure and Algorithm; Computer Languages and Programming Technical University of Denmark COPENHAGEN, DENMARK Department of Electrical Engineering Columbia University New York City, USA Fu Foundation, Electrical Engineering Core courses: Numerical Methods in Finance; Stochastic Methods in Finance, Linear Regression Models, Earnings Quality and Fundamental Analysis, Speech Recognition

Work Experience Jul 2013- Now Jul 2013- Aug 2013 Jun 2013- Jul 2013

Wall Street Trading, LLC New York City, USA Equity Trader Using fundamental and technical analysis, do research on stocks listed in NYSE and NASDAQ Invented a strategy by myself and used MATLAB to test this strategy Singular Research New York City, USA Research Analyst Made an excel spreadsheet of required Macro Market Indicators using SMF Add-in to automatically grab the latest data from the internet Give advices to hedge funds and mutual funds by the help of the model Nomura BEIJING,CHINA IBD Department, analyst Do research on Chinas TMT Industry according to reports provided by Nomura Write a profile of Alibaba Group. The profile includes company overview, shareholders structure and latest news Update Nomuras data of Chinese companies listed in HKEX and NYSE. By writing FactSet code, I searched for the following information of these companies: company introduction, latest price, 52 weeks H/L price, target price, P/E and P/B ratios Based on reports provided by major banks on global real estate and tourism market, I conducted a throughout study on these industries Do file retention of finished deals. Check the due diligence, roadshow report, offering memo, etc

Personal

Skilled in SQL and Microsoft Office Package; Perfect in building models using Java, C++, Maple, Matlab; GRE 1520, analytical Writing 3.5;TOEFL 107

Projects Using MATLAB Building Model Testing Stock Trading Strategy Used MATLAB to process historical data and simulate a trading strategy invented by myself on 50 stocks,

and obtain the statistical results Corporate Finance Report Analysis Using ROE, Inventory, PP&E, Goodwill, made a throughout analysis of the 2011 annual report of Huawei Linear Regression Analysis Implemented linear regression model analysis on stock data with R and MATLAB Option Pricing using Black-Scholes formula and Brownian Motion Build a model using Black-Scholes formula and the algorithm of Brownian Motion on MATLAB Gathered and processed the data using R Made a analysis of option pricing Building a Speech Recognition System Using C++ Used the algorithm of Markov Process and data base knowledge, I build a machine learning speech

recognition system Gathered and proceeded the Wall Street Journal word sample Tested on the data, and the result was quite good, with a 85% recognition rate

1

Xin He 600 West 122nd St. #625, New York, NY 10027 xh2176@columbia.edu 646-627-3165

EDUCATION Columbia University, The Fu Foundation School of Engineering and Applied Science New York, NY Master of Science in Electrical Engineering Expected 12/2013 GPA: 3.87/4.0 Related courses: Introduction to databases, Content distribution networks, Next generation networks, Computer communication networks, Analysis of algorithms, Computer networks, Formal methods of communications, Mobile HCI. Beijing University of Post and Telecommunications Beijing, China Bachelor of Engineering in Telecommunication Engineering with Management 09/2008 - 06/2012 Overall GPA: 89.1/100 Major GPA: 91.3/100 Related courses: Java programming, Software engineering, Internet protocols, Advanced network programming, Wireless networks, Internet applications.

PROJECT EXPERIENCE Columbia University New York, NY Python Programming 05/2013

Designed user interfaces of several interactive games, including blackjack and asteroids and spaceship. Completed those game projects by handling with GUI and sound in Python.

Java Socket Programming2 04/2013 Programmed and simulated the mechanism of selective repeat protocol and distance vector routing protocol

in Java to understand behaviors of TCP/IP and some routing algorithm better, Using Java sockets and multi-threading to realize the duplex communications among users that implement

SR and DV in the network. Cloud Computing 12/2012

Devised an on-line app, called trip assistant, which can gather weather and locality information for travelers Collaborated with a teammate and carried out the programming by using JAVA Servlet, JAVA Script and

HTML Took advantage of Google App Engine to upload our app on cloud which enables users to access the app

through cloud Database Design and Implementation 11/2012

Designed the ER diagram of a job shop Created the schema of the job shop and set up its database with SQL Inserted data and implemented some relevant queries by using SQL Extended the design of the database and added object-relational features into the original design

Beijing University of Post and Telecommunications Beijing, China Undergraduate Project 11/2011 - 05/2012

Modified and improved an existing Ad-hoc network routing protocol AODV. Simulated and verified the new routing protocol by using NS2 under Linux with C++ and TCL.

Software Engineering: Development of a Management System for a Gym 04/2011 05/2011 Collaborated with teammates to develop the system by following five steps of Rational Unified Process. Programmed the functional part of the system that facilitates member registrations and room bookings in Java.

Linux C Language Socket Programming 10/2010 Designed a program that can receive emails from SMTP clients and then forward emails to its destination email

server. Authenticated username and password of email accounts by BASE64 encoding

INTERNSHIP EXPERIENCE Intern, Tianjin Era Biological Engineering Co., LTD 06-07/2013 China

Participated in testing and maintenance functions of the companys main software, mainly focused on the algorithm of medical analysis.

Major programming language is Java.

HONORS Beijing University of Post and Telecommunications Beijing, China

Won First Prize in the International School Chorus Competition 05/2010 Won Second Prizes for scholarship in the Beijing University of Post and Telecommunications 2010/2009

Y O U W E I H O U 5 1 3 W E S T 1 3 5 S T R E E T N E W Y O R K . N Y . 1 0 0 3 1

P H O N E 6 4 6 - 4 2 1 - 4 9 2 1 E M A I L Y H 2 5 5 1 @ C O L U M B I A . E D U

EDUCATION Columbia University, School of Engineering and Applied Science New York, NY MS in Electrical Engineering, GPA: 3.4/4.0 Expected Completion Dec. 2013 Beijing University of Posts and Telecommunications, School of Information and Telecommunications China BS in Information Engineering, GPA 3.2/4.0 Jun. 2012 PROJECT AND INTERNSHIP EXPERIENCE Columbia University New York Researcher & Programmer Nov. 2012 Dec. 2012 A Study of the Capacity of Multi-User Wireless Interference Channel based on Interference Alignment Algorithm Studied Classical Interference Alignment Algorithm and two improved distributed algorithms Implemented a computer simulator evaluating the performance of the two algorithms in Matlab Programmer Oct. 2012 Dec. 2012 Network Protocols Emulation & Simple Online Bidding System Socket & multi-thread programming in Java using UDP protocol Emulating Go-Back-N protocol and Distance-Vector Routing Algorithm Online NBA 2012-2013 Season Searching System Feb. 2013 Apr. 2013 Database design in Oracle Database 10g Programming in JSP & SQL Classical Pacman Video Game Mar. 2013 May. 2013 Two versions: in Java (on PC) and in C & VHDL (on FPGA & VGA) Implemented ghost behavior AI & game features (software) Connected key boards & VGA to FPGA (hardware) Beijing University of Posts and Telecommunications Beijing, China Researcher & Programmer Feb. 2012 Jun. 2012 Coexistence Studies for TD-LTE with Mobile Satellite System Researched for basic concepts of TD-LTE and Mobile Satellite System and their spectrum allocation in China Calculated the ACIR between two systems using Deterministic Analysis Wrote computer simulator evaluating the performance of the two systems in C using Monte Carlo Simulation VIA Technologies, Inc. Beijing, China Software Quality Assurance Engineer Jul. 2010 Sept. 2010 Tested two position based software named Handpod Eside and Handpod HandMate Drafted software development plan for HandTrip software Got familiar with software development process and corporate documents standards TECHNICAL AND PERSONAL SKILLS Applications MS Office Suite (Word, Excel, Powerpoint), Matlab, Eclipse Programming Languages Java, C, Html/CSS, JavaScript Languages Fluent in English and Mandarin Personal Traits Strong written and oral communication skills, ambitious and confident nature, driven

towards excellence, always seeking new challenges to rise up to

Andrew Yiwei Huang 40 Newport Pkwy Apt 3406 Jersey City NJ 07310 (646) 709-1667 yh2565@columbia.edu EDUCATION Columbia University Sep 2012 - Dec 2013

MS Electrical Engineering

Relevant Coursework: Computer Architecture, Computer Networks, Data Structures, Analysis of Algorithms, Cloud Computing, Big Data Projects: Air Travel Simulation System (Back-end), Online Gaming System(Protocol), Cloud Video Streaming (Web)

University of California, Los Angeles Aug 2008 - Dec 2009 MS Mechanical Engineering Concentration: Micro-Electro-Mechanical Systems (MEMS)

National Taiwan University Sep 2003 - June 2007 BS Mechanical Engineering Presidential Awards, 2004 & 2006

PROFESSIONAL EXPERIENCE

Institute for Information Industry, Taipei June 2013 Aug 2013 Intern Engineer Developed a business plan involving future financing for enterprise cloud storage Studied a text mining method for the recommendation function Participated in strategic planning with senior management to define R&D goals

for the next generation of the cloud storage product and its position relative to the future marketplace

Hon Hai Precision Industry, Taipei Dec 2010 Mar 2012 Mechanical Project Engineer Led two Cisco server product development projects Directed an I/O module product from validation testing through mass production Completed the mechanical design of a network device product

SKILLS

Programming: Java (proficient), Lisp (prior experience), Matlab Web Technology: Javascript Operating Systems: Linux, Windows, Mac OS CAD: Pro E, AutoCAD 2D/3D

ACTIVITIES Volunteer, Bliss & Wisdom Education Foundation Aug 2013 - present Taiwanese Student Association, UCLA 2009 Pubic Representative, ME Department, National Taiwan University 2003 2005

LANGUAGES

Fluent in English and Mandarin

Chong Li E-mail: cl3064@columbia.edu Mobile Phone: 917-683-6358

QUALIFICATIONS

ASIC design with full custom and RTL-to-GDS CAD flow Hardware and software co-design for embedded systems NOC and Interconnects optimization

EDUCATION

Columbia University 09/2012- 12/2013

MSEE Candidate

Beihang University (Beijing) 09/2008- 07/2012

B.S. in Electrical Information Engineering School GPA: 3.5/4.0

ASIC DESIGN & VERIFICATION PROJECTS

Global Asynchronous Local Synchronous Network-on-chip 09/2012 - 05/2013

Implemented NoC for multicore processors in 2D mesh topology. Conducted UVM based testbench which ensures a correct and dead-lock free network. Successfully conducted chip design flow, top down through architecture design,

micro-architecture design, RTL design & verification, synthesis & netlist simulation, Auto

Place & Route (APR) for GDS file.

Redesigned robust mixed-time pipeline which reduces long wire delay.

Full custom 8-bit Microcontroller System Design 09/2012 - 12/2012

Designed a full custom 8-bit microcontroller with SRAM, PLA, adder, shifter and latches. Optimized critical path delay by carefully sizing at transistor level to achieve

microcontroller working at 1GHz, the best performance in class.

Completed full custom chip design flow through architecture design, schematic design & simulation, layout debugging (DRC & LVS clean) and post layout simulation.

RTL & Logic Design Projects 09/2012 - 12/2012

Finished ASM of a trigonometric system, which completes sine/cosine IEEE standard FP Function within 8 clock cycles with 4 adders and 2 multipliers.

Designed FSM with more than 30 states for I2C slave controller.

C/C++ PROGRAMMING PROJECTS

Bricks-Breaker Game on Altera Cyclone II FPGA Board 02/2013 - 05/2013

Wrote efficient Embedded C which reduces display latency by optimizing hit-wall decision. Wrote controllers for VGA display, PS/2 Keyboard and Rotary Controller in a SOPC.

Synthesizable Network-on-Chip (NoC) Interface in SystemC 02/2013 - 05/2013

Implemented interfaces in SystemC synthesizable subset, which optimized the interconnection between local IP cores and AMBA AXI compatible network.

Designed my own FIFOs and arbiters to shorten packet length.

CAD Tools Design 02/2013 - 05/2013

Developed High-Level-Synthesis tool using FEAS algorithm and Linear Programming Method, which can achieve both clock cycle minimization and register count reduction.

SKILLS AND OTHERS

Programming language: C/C++, System Verilog, VHDL, Assembly, SystemC/TLM, Tcl, Perl CAD Tools: Cadence Virtuoso/CtoS-compiler/Spectre/Ultrasim/Encounter,

QuartusII, MATLAB, Synopsys VCS, Modelsim

GUANGBIN LI 414 West 121st Street Apt 6, New York, NY 10027 (917)704-5520 gl2423@columbia.edu

EDUCATIONColumbia University, The Fu Foundation School of Engineering and Applied Science New York, NYM.S in Electrical Engineering, GPA: 3.72 Expected Dec 2013Coursework: Applied Data Mining; Optimization (PhD Level); Stochastic Models; Control Theory; Power System Analysis;

Wireless & Mobile Networking; Electrical Power Networking; Corporate Finance;Tsinghua University, Department of Electrical Engineering Beijing, ChinaB.Eng in Electrical Engineering and Automation July 2012Coursework: Computer Programming Basis on C (Top 1); Project-Based Training on C++ Programming;

Matlab Experiments in Mathematics (98/100); Fundamentals of Computer Literacy; Application of Office Software;

EXPERIENCEPhilips Research North America, Briarcliff Manor, NY Oct, 2013-PresentData Mining Research Intern

Extracted COPD (chronic obstructive pulmonary disease) admission cases from HCUP-SID (Healthcare Cost and Utilization Project - State Inpatient Database), based on ICD-9 (International Classification of Diseases, 9th Revision) codes.

Identified 30-day all-cause readmission cases by conditional selection in MySQL from joint table. Classified unplanned/planned readmission cases and calculated readmission rates for each hospital. Developed quantitative models for readmission penalty in Mablab, and addressed financial risks for local hospitals.

PROJECTSData Mining on State of Union Addresses, Columbia University Fall 2013

Tokenized all 214 addresses and filtered the words by using regular expression and word stem in R. Built vector-space model using TF/IDF analysis. Visualized documents distances using multi-dimensional scaling on dissimilarity matrix for documents. Plotted hierarchical clustering dendrogram for documents with different dissimilarity measurements between groups.

Google Earth Display of Infant Mortality and Population for Countries, Columbia University Fall 2013 Created XML tree codes for 2011 CIA Fact Book, and extracted IM and Pop information from the tree into data frame. Wrote scripts in R to create KML hierarchy, and augmented with pushpins and coordinates for each country. Classified IM and Pop data into 5 categories separately, provided IM category with 5 different colors and Pop with 5 sizes for

irons, and displayed in Google Earth with a better visualization. Power Forecasting for Plug-in Electric Vehicles with Statistic Simulations, Columbia University Spring 2013

Generated statistic distributions of Charging Duration and the Time Begin to Charge for electric vehicles from NHTS (National Household Travel Survey) database.

Developed a specific Monte Carlo code in Matlab to simulate power curves for 10,000 plug-in electric vehicles. Optimized parameter distributions closer to the valley zone of original load curve to realize load shifting and smart charging.

Surface Charge Measurements and Calculations on the Insulator, Tsinghua University Spring 2012 Obtained surface potential distribution by meshing measurement with a vibrating capacitive probe. Developed algorithm for coefficient matrix in Matlab to calculate the surface charge distribution. Extracted auxiliary qualitative charge distribution maps by sprinkling colored chemical dusts.

LEADERSHIPExecutive Director of Class 2012 EE graduates, Tsinghua Alumni Association June 2012-PresentFuture Global Leaders Program Member, University of California, San Diego August 2011

SKILLSExpertise: Data Mining, Database, Electric Vehicles, Power System Analysis, Smart Grid, Optimization, Stochastic Analysis.Computer: R, Matlab, SQL, C, C++, Java, KML, XML, Unix, Multisim, LabView, Microsoft Office (Word, Excel, PowerPoint)

550 Riverside Dr. Apt 7 858-242-9885

New York, NY10027 kl2669@columbia.edu

KEWEI LI

Education

Columbia University in the City of New York, 2014

DegreeMaster of Science in Electrical Engineering

MajorDigital Signal Processing

Courses in Advanced DSP, Image Processing, Communication Theory,

Communication Systems, Linear Systems, Detection and Estimation Theory

BEIJING INSTITUTE OF TECHNOLOGY, 2012

DegreeBachelor of Engineering Candidate

MajorInformation Engineering

UNIVERSITY OF CALIFORNIA, SAN DIEGO -- Exchange Student, 09/2011

- 08/2012

Courses in Algorithm Design, Advanced Probability, Active Circuit Design,

Fundamentals of Devices & Materials

Completed Senior Design Project in Class-E RF Power Amplifier

Experience

Columbia University in the City of New York, 09/2013 - 12/2013

Design of Program for Image Matching and Clustering

Responsibilities:

Designed and implemented code for image similarity analysis via Harris corner

detection and representation of relation as graph.

Columbia University in the City of New York, 02/2013 - 05/2013

Design of Facial Feature Detection and Alteration App on Android Platform

Responsibilities:

Designed and implemented code for facial feature extraction and alteration in

Java for Android 4.3.

Columbia University in the City of New York, 02/2013 - 05/2013

Analysis of HEVC Video Compression Algorithm

Responsibilities:

Implemented HEVC video compression interface on Windows and Linux,

evaluated performance in compression rate and efficiency

University of California, San Diego, 02/2013 06/2013

Senior Project with Resonant Health

Responsibilities:

Designed and implemented a 27.12MHz class-E RF amplifier for potential

medical use.

Skills

Proficient in Java, C/C++, VHDL, Verilog HDL, ASM, BASIC language

programming skills

Excellent Skills of MATLAB and Simulink, adept at specialty related software

such as System View, Orcad, Pspice, Quartus II, Modelsim and Multisim

Proficient in operating experimental equipment and instruments such as signal

generator, oscilloscope and multimeter and proficient in electrical skills

Skillful in computer hardware and software assembling and disassembling

desktop and laptop, operating DOS and Linux, installing and using virtual

machine for programming

Capable of organizing research projects and integrating individual work of

members into group work

NAN LI 1855 Adam Clayton Powell Jr Blvd New York, NY 10027 917-868-5912 nl2411@columbia.edu

O B J E C T I V E Seeking full-time opportunity on digital ASIC design / verification/ Test.

E D U C A T I O N Columbia University The Fu Foundation School of Engineering & Applied Science, New York, NY M.S. in electrical engineering Expected 12/2013

GPA 3.5/4.0 Xidian University The school of science, Xi an, China B.S. in electronic information science and technology 01/2008 - 06/2012

GPA 85/10

A S I C D E S I G N & V E R I F I C A T I O N Microcontroller core design Columbia University Bubble Razor implementation on Amber 23 02/2013 05/2013

Implemented DVS (dynamic voltage scaling) using a new technology Bubble Razor on the Amber 23 processor core. Successfully conduct RTL modification & verification, synthesis & netlist simulation, APR for amber 23. Completed Schematic design for Bubble Razor and layout for the whole chip (amber 23 with Bubble Razor). Fulfilled function comparison and power comparison using Cadence Virtuoso and synthesis result comparison using

ModelSim. An 8-bit accumulator-based core with a 6-bit instruction word and 3-bit opcode 09/2012 12/2012

Consisted of Adder, Shifter, SRAM, Accumulator, decoder, MUX and Bus driver Completed layout with LVS and DRC clean, combined Spectre and Ultrasim simulation using Cadence Virtuoso.

RTL design Columbia University A custom trigonometric function unit 09/2012 12/2012

Computed both Sine and Cosine function, with user-specified precision. Written an algorithm for its behavior in pseudo-codetransformed and formalized the specification at the register-

transfer level(RTL) as a generalized ASM. Derived a complete micro architecture, including both the data path components and a controller based on the RTL.

C / C + + P R O G R A M I N G P R O J E C T S

CAD design Columbia University A retiming tool for sequential circuit optimization 02/2013 05/2013

Included two main functions, (i) cycle-time minimization and register count reduction;(ii) area minimization under a certain cycle-time constraint.

Used FEAS algorithm for both the two functions and the Simplex Method to solve the linear problem in function (ii). Based on those two algorithms to program (using C++) fulfilling these functions.

Embedded System design Columbia University A voice-controlled single-player platform video game 03/2013 05/2013

Captured a players voice to control the character in this game dodging and destroying incoming enemies. Consisted of software (using C) part and hardware (using VHDL) programming. In charge of the memory allocation and background display part of hardware programing.

I N T E R N S H I P

ZTE Corporation China PCB board functional verification 06/2013 08/2013

Designed the Schematics using Cadence and tested the function using oscilloscopes. Tested a router using the chip RTL 8685 as the processor.

S K I L L S

Programming language: C, VHDl, Verilog, Perl, (familiar with) System Verilog, TCL.

Tools: Cadence Virtuoso, Cadence SoC Encounter, LTSpice, ModelSim, Synopsys PrimeTime.

Interests: Piano, Table-tennis, Swimming.

Huan Liang

(917) 525-8608 | hl2720@columbia.edu

http://www.linkedin.com/in/aaronhuanliang/

5000 25th Ave NE Nordheim Court #8303, Seattle, WA 98105

EDUCATION

Columbia University, School of Engineering & Applied Science New York, NY

Master of Science in Electrical Engineering Expected 12/2013

Northwestern Polytechnical University, School of Electronics and Information Xian, China

Bachelor of Engineering in Electronics and Information Engineering 09/2008 - 07/2012

GPA: 3.6/4.0, National Scholarship of China (Top 1%)

PROFESIONAL EXPERIENCE

Pure Minutes LLC New York, NY

Project Management Intern 01/2013 - 05/2013

Provided project management of several projects including mobile apps and webpages

Collaborated with designing team and developing team to provide technical support

Assisted with implementation of wireless telecom services

Xi'an XD Switchgear Electric Co., Ltd. Beijing, China

Sales Intern 07/2011 - 09/2011

Conducted product presentation to the potential customers

Organized feedbacks from the customers

Provided troubleshooting services to the customers

ZTE Corporation Xi'an, China

R&D Intern 03/2011 - 05/2011

Assisted with hardware development and communication products tests

Drafted the products requirements

Assisted the cooperation among related departments

RESEARCH AND PROJECT EXPERIENCE

Study of Social Network Based Applications, Columbia University 09/2013 12/2013

Entrepreneurial Case Study of Yelp, Columbia University 09/2013 - 12/2013

Carrier Aggregation Techniques in LTE-Advanced, Columbia University 01/2013 - 05/2013

Research of Cloud Computing on Mobile Devices, Columbia University 09/2012 - 12/2012

Research of Power Control in WiMAX System, Columbia University 09/2012 - 12/2012

D2D Communication Technology based on LTE Network, NWPU 11/2011 - 06/2012

Static Hand Gesture Recognition Based on Computer Vision, NWPU 03/2010 - 09/2011

Design of Embedded Virtual Instrument Based on USB, NWPU 11/2009 - 03/2011

ACTIVITIES

1st Japan-China-Korea Youth Forum, National representative of China 09/2010 - 10/2010

Model UN Conference of NWPU, Secretary General, Held a conference of 500+ delegates 01/2010 - 05/2010

SKILLS

JAVA, C, Python, SQL, MATLAB, Wireless Networks, TCP/IP, Project Management, Marketing

mailto:hl2720@columbia.eduhttp://www.linkedin.com/in/aaronhuanliang/

P E I Q I N 3 6 2 R I V E R S I D E D R I V E . A P T 2 B 1 . N E W Y O R K . N Y . 1 0 0 2 5

P H O N E 9 1 7 - 8 5 3 - 6 1 3 3 E M A I L P Q 2 1 1 7 @ C O L U M B I A . E D U EDUCATION Columbia University, School of Engineering and Applied Science New York, NY MS in Electrical Engineering, GPA: 3.5/4.0 Expected Completion December 2013 Beijing University of Posts and Telecommunications, School of Electronic Engineering Beijing, China BS in Optical Information Science and Technology, GPA: 85/100(top 10%) June 2012 AWARDS Outstanding Undergraduate Graduation Thesis: Top 5% in the School of Electronic Engineering 2012 First Class Scholarship: Top 5% in the School of Electronic Engineering 2011 & 2009 Excellent Volunteer, Beijing Haidian Public Safety Museum 2009 PROJECT AND INTERNSHIP EXPERIENCE Beijing Samsung Telecom R&D Center Beijing, China Data Annotator Intern Summer 2013 Participated in the development of a content-classified system, and was responsible for creating training corpus by

scanning hundreds of downloaded articles Provided suggestion on the original key words library and improved accuracy Columbia University New York Course Project: Operating Systems January-May 2013 Wrote a Linux shell to implement basic commands, including changing directory, adding/removing environment

variables, I/O redirection and pipeline Added system calls with teammates to Android kernel to set "colors" to processes, modified the binder to prevent

processes from communicating with each other when two processes have different "colors", and wrote corresponding test programs independently

Added an earliest-deadline-first scheduler with teammates, wrote about 50% of the scheduler functions by myself, and added system calls to Android kernel independently to set the deadlines for processes

Gained basic skills for C programming in Linux kernel space Columbia University New York Course Project: Databases March-April 2013 Designed an E-R diagram for blog application, and wrote SQL statements in Oracle database management system

to create more than ten tables and insert corresponding data Based on this database architecture, used JSP to design a blog website with teammate. Wrote about 70% of the

codes, and accomplished logging in of users, writing blog posts, commenting on blog posts and photos, sending messages, etc.

Learned how to implement a simple website with JSP and database system Columbia University New York Course Project: Formal Method : Communications April 2013 Discussed with teammates about the detailed implementation of go-back-N protocol Wrote a Java program independently to simulate the go-back-N protocol with full-duplex channel and a fixed

window size Gained experiences in simulating network protocols, and started to learn Java programming TECHNICAL AND PERSONAL SKILLS Applications Linux, Eclipse, Vim, Matlab, Oracle RDBMS, MySQL Programming Languages Java(most proficient), C(proficient), C++(rudimentary), HTML(prior experience),

SQL(prior experience), PHP(prior experience), JavaScript(prior experience) Languages Fluent in English and Chinese

Shawn Shaw 181 E 111 st., Apt. 4B, New York, NY 10029347-365-0704wenhsiang.Shaw@gmail.com

EDUCATION Columbia University, Master of Science in Electrical Engineering GPA: 3.88 Expected Dec. 2013 Relevant Coursework: Parallel Programming, Operating System, Machine Learning, Cloud and Mobile Challenge

National Taiwan University, Bachelor of Science in Electrical Engineering Sep. 2007 Jun. 2011 Relevant Coursework: Intro to Algorithms, Data Structure, Multimedia Processing, and Computer Network

WORK EXPERIENCE Hush-Hush, Santa Clara, CA Apr. 2013 present Lead Software Engineer In Hush-Hush, we develop a mobile app that allows users to comment on people anonymously, and share, like or follow posts anonymously in many ways such as texting as well.

l Developed back-end APIs with Ruby on Rails that talks to an iOS mobile application KLA-Tencor, Milpitas, CA May 2013 Aug. 2013 Software Engineer Intern An embedded C HTTP server and a CSP compiler are built to facilitate developing the request handlers for monitoring software programs that run on machines without I/O devices, e.g. server clusters.

l Developed C Servlet specification, C Server page (CSP) and CSP compiler using ANTLR 4 which is used by 20 development teams

l Improved C HTTP server by adding supports of all kinds of HTTP request, MIME types and headers Ponder, New York, NY Jan. 2013 May 2013 Software Engineer Intern

l Built a variant of text clustering to discover patterns in users reading page contents collected by a plug-in l Streamlined end-to-end system which pulls data from MongoDB, runs clustering algorithm, stores results in

JSON and uses D3, JavaScript and HTML to visualize the clusters

PROJECT EXPERIENCE

NQueens with Pawns Problem, Parallel Programming Nov. 2012 Dec. 2012 l Developed a parallelized two-level back-trace depth-first search to solve the N Queens with pawns problem l Designed the workload dispatcher that splits the work to threads heuristically evenly l Awarded 3rd prize, sponsored by KLA-Tencor

Concurrent Hopscotch Hashing, Data Structure Oct. 2012 Dec. 2012 l Implemented the concurrent hopscotch hashing in X10 from scratch, operations of which are lock-free l Benchmarked and compared with serial version of hopscotch hashing and JAVA hash tables

Acoustics Simulation with CUDA, GPGPU Programming Jun. 2011 l Built the real-time acoustic simulation through wave equation on GPU written in CUDA l Created the user interface using Qt4 that communicates with the process which runs acoustics simulation l Awarded 1st prize, supported by NVIDIA and Microsoft

Adaptive Offset Filter in HEVC, Video Compression Jan. 2011 l Proposed and implemented a new approach to improve the offset filter by more than 1 in PSNR l Awarded 1st prize supported by MediaTek

SKILLS C, C++, Ruby on Rails, Java, CUDA, HTML, Matlab, X10

ACTIVITIES & LEADERSHIP President of NTU Dormitory Student Association, Chief of Culture Department at NTU Student Association, Summer Volunteering in Mumbai India, Best Representative of India in Model of United Nation Conference

Yang Shen TEL: (740)-590-8386

Email:sy2008john@gmail.com Current Address: 517 W 113th St, Apt 62

New York, NY, 10025 Education Columbia University, The Fu Foundation School of Engineering and Applied Science New York, NY MS in Electrical Engineering Expected December 2013 Ohio University, Russ College of Engineering and Technology Athens, OH BS in Electrical Engineering June 2012 Minor in Mathematics Relevant Coursework: Physics of Solar Energy, Principle of Semiconductor Physics, Fundamentals of Photonics, Lightwave Devices, Electronic Circuit, Random Signals and Noise, Micro Device Fabrication, Energy Conversion Photonic integrated circuit, Managing Technological Innovation, Financial Engineering and Risk Management, Computer Communication Network, Nanoscale Fabrication and Devices

Work Experience Northwestern Mutual New York, NY [May 2013-July 2013] Researcher

Creating and developing client relationships by advising individuals and businesses on financial needs. Working closely with senior financial representative, specialized in Investments, Insurance, Estate and Trust solutions. Managing assistants by assigning various administrative tasks, including collection of confidential client information and update of

the organizations client database. SGS Standards Technical Services Co., Ltd Shanghai, China [June 2010-September 2010] Test Engineer

Hands on standards technical service in home appliances inspection, verification, testing and certification. Set up multifarious experiments based on each testing aspect, collect data and analyze data. Hands out final standards technical service report to superior and make product certificate.

Haining Jingyi Electronic CO., Ltd Zhejiang, China [June 2008-Jun2012] Technology Assistant, Management Assistant

Designed basic circuit and structure for different electronic products. Hands on products assembly and testing. Hands on company management and operation.

Project Experience Columbia University New York, NY [December 2012- present] Managing Technology Innovation

Design and build up an online Apartment search website for students especially. Doing marketing research and survey analysis. Set up business model and target market. Communicate with business specialist. Hands out the final report, in class speech and prototype of the website structure.

Ohio University Athens, OH [September 2011 - June 2012] Solid-State Lighting

Designing and testing the outdoor illumination of Ohio University campus for LED alternative lighting. Using software to set up the 3D model scene and plug-in different types of LED luminary and collecting data. Communicate the

university facility management office and LED luminary company representative. Hands out the final report and financial Statement to the university facility manager.

Ohio University Athens, OH [February 2012 - June 2012] Electric Machines

Designed DC Motors and Generators. Doing research on various types of DC motors and using electronic circuits components setup the model of Permanent-Magnet DC

Motor, Series DC Motor, Shunt DC Motor and Compounded DC Motor. Simulation in software and collecting data. Hands out the final report and in class speech.

Leadership Activities Tau Beta Pi National Engineering Honor Society. October 2011 - present Eta Kappa Nu Electrical & Computer Engineering Honor Society. April 2012 - present IEEE National professional association. April 2012 - present Committee Member of Columbia University Asia-Pacific Development Society. December 2012 - present Vice President of Chinese Students & Scholars Association in Ohio University. June 2010 - September 2012

Technical Skills Applications: MS Excel, Word, Power point, AutoCAD, Multisim, Mathematica, Adobe Photoshop. Programming Languages: MATLAB, C/C++, Python Operating System: Linux, Windows and Mac Language: Chinese (Native), English (Fluent) Interest: Reading, Photography, Entrepreneurship, Investment

NevilleSun561W143rdStApt52~NewYork,NY10031

ns2869@columbia.edu 9787602077Education:ColumbiaUniversityTheFuFoundationSchoolofEngineeringandAppliedScience,NewYork,NYMastersProgramforElectricalEngineering,December2013Concentration:ElectromagneticsandPhotonicsEngineeringGPA3.635SyracuseUniversityL.C.SmithCollegeofEngineeringandComputerScience,Syracuse,NYBachelorofScience,May2012Major:ElectricalEngineeringSkills:MicrosoftOffice(entiresuite),SolidWorks,PTC,Photoshop,WebDesignusingAdobeDreamweaver,

AdobeFlash,MATLAB,MultiSim,HFSSandAnsoftDesigner,C/C++ProgrammingExperiencedwithdigitalandanalogcircuitdesignusingMultiSimExperiencedwithcomputernetworkingandwirelessnetworkingExperiencedwithalllabandworkshoptools(e.g.soldering,powertools,oscilloscopes,etc.)Projects:

SyracuseUniversity MarsRoverDesigned,built,andprogrammedaLegorovertoefficientlycollectrocksJuniorDesignProjectDesignedandbuiltaminielectronicpianointheformofagloveRadioFrequencyTransmissionLineDesignedandtestedaworkingRFtransmissionlineusingHFSSRoboticArmProjectDesigned,built,andprogrammedaroboticarmtomimicusersarmmovements

Tookontheleadershiproleofmyteamandcoordinatedthegroupeffort Upgradedourroboticarmsresponsetimebyconsolidatingmultipleviewpointsfromdifferent

majorsinordertoachievethebestpossiblesolutionColumbiaUniversity

PersistenceofViewDisplayBuiltandprogrammeda360degreerotatingdisplaythatprojectimagesOLEDDisplayUsedstandardmetaldepositiontocreatesmallOLEDdisplays.WorkExperience:EngineeringTechnician May2008September2008&AngstromSunTechnologies,Acton,MA May2010September2013

Operatedreflectometersandellipsometerstomeasurethinfilmthicknessonfabricatedwafers Ranteststoreduceelectromagneticinterferenceinthesystem Calibratedxyzstagemotorsonellipsometers Createdthinfilmlayerrecipesforengineerstorecreatemeasurements Plannedandconstructed3DmodelsusingSolidWorksfornewproducts Systemtestedfinishedproducts Createdmanualsandinstructionsforcustomeruse Capturedandeditedphotoimagesofcompany'sproductsusingPhotoshop Traveledwithotherengineerstodifferentcompaniestoinstallequipment Coordinatedtheboothandansweredquestionsforcustomersontheshowroomfloorsatthe

SemiconWestConventionandtheAmericanVacuumSocietyexhibitionEngineeringTechnician May2009August2009LotusPen,Shanghai,China

Designedautomatedproductionlinemachinery Maintainedroboticsandmachinery Operatedspectroscopicreflectionprobestoobtainexactwavelengthsforcolormeasurements Usedmassspectrometryequipmenttodetectandmeasuretheratioofchemicals

VolunteerExperience:StudentMentor September2009December2009WilsonParkCommunityCenter,SyracuseNY

Setupacomputernetworkforthestudentlab Educatedchildrenfromagesfouranduphowtousecomputers

SayYestoEducationTeachersAssistant February2010May2010FrazerandRobertsElementarySchool,SyracuseNY

AssistedteacherswiththeirclassroomsandplannedafterschooleventsActivities:PhiSigmaPiNationalHonorsFraternity

Workedonthescholarship,fundraising,publicrelations,andinterchaptercommitteesPoliticalEducationOfficerforA.S.I.A.(AsianStudentsinAmerica)

LeddiscussionsonAsianAmericancultureandissuesandpromotedculturaldiversityAPA(AsianPacificAmerican)Monthcommitteeorganizer

PlannedamonthlongsessionofeventstoraiseawarenessofAsianAmericansoncampus

Fethi Semih Tufekci 2196 Frederick Douglass Blvd. Apt 5W New York, NY 10026 929-777-1237

fst2103@columbia.edu www.linkedin.com/in/fethisemih/ EDUCATION Columbia University, School of Engineering and Applied Science New York, NY MS in Electrical Engineering, GPA 3.66/4.00 December 2013 Relevant Coursework: Digital Communications, Algebraic Coding Theory, Computer Communication Networks, Information Theory, Wireless and Mobile Networking, Principles of 4G Wireless Middle East Technical University, Faculty of Engineering Ankara, Turkey BS in Electrical and Electronics Engineering, GPA 3.32/4.00 June 2012 Relevant Coursework: Telecommunications I&II, Digital Signal Processing, Introduction to Microprocessors, Introduction to Computer Networks, Analog Electronics, Digital Electronics

PROJECT EXPERIENCE Middle East Technical University, Faculty of Engineering Design of Hexpert the Wireless, verbally controlled vehicle with collision avoidance Fall-Spring 2012 Course: Senior Engineering Design I &II

Leaded a team of five people for nine months to design and implement a prototype vehicle from scratch which fulfills given design criterion.

Created a basic communication protocol using Arduino libraries to ensure that vehicle can receive and transmits signal using ASK modulation under noise from devices working at the same frequency band.

Supervised development of different subsystems by other team members and merged the subsystems into the end product. Presented the process to the professors of the design studio regularly via presentations and progress reports.

Design of an Action Potential and Propagation Generator Spring 2012 Course: Fundamentals of Biomedical Engineering

Constructed an algorithm based on the Hodgkin Huxley model by linearizing the differential equations of the model. Implemented a simulator on Matlab with a complete user interface, and verified the performance by observing some

properties of excitable membranes on the simulator. Design of a Communication System using FSK (Frequency Shift Keying) Modulation Fall 2012 Course: Digital Signal Processing

Built a Matlab based transmitter receiver pair which can transmits any ASCII based input using FSK modulation via speakers, and receives at another computer via microphone and demodulates the signal to the original input.

Verified the performance of the system for different distance and room conditions. Design of a Computerized Tomography Simulator Fall 2012 Course: Introduction to Medical Imaging

Implemented a basic CT simulator on Matlab that can reconstruct an image. Constructed a Matlab program that can solve the forward problem, filtered back projection algorithm and inverse problem. Tested and verified the effects of different filter, sample and projection numbers.

WORK EXPERIENCE Aselsan Inc, Microelectronics, Guidance and Electro-optics Division Headship Ankara,Turkey Intern Engineer June-July 2011

Created custom algorithms in VHDL in order to test the functionality of SPARTAN3 FPGA of the Xilinx.

Arelik Inc. Cooking Appliances Plant,R&D Department Bolu,Turkey Intern Engineer July-Aug 2010

Conducted product benchmarking by reverse engineering competitors products in order to understand how the products vary in market in terms of technology.

Implemented electromagnetic compatibility (emc) tests on prototype products via pre-designed, computerized test structure to ensure that the prototype is ready for mass production.

SKILLS Engineering Tools: MATLAB, XILINX ISE, LTspice, Multisim Programming Languages: asm, C, C++, Verilog, VHDL Technical Skills: Familiarity with standard electrical lab equipment (Signal Generator, Oscilloscope etc.) Operating Systems: Windows, Mac OS Applications: Microsoft Word, Excel, Power Point AWARDS

Honorable Mention Award for senior year design project Hexpert

Ban WANG Phone: (917)-941-6175 Email: banwang19920207@gmail.com

Education Columbia University New York, NY Master of Science 09/2012-Present Electrical Engineering in The Fu Foundation School of Engineering and Applied Science; GPA: 3.9175/4.0; Relevant Coursework: Digital Signal Processing, Detection and Estimation, Control Theory, Circuits in

Brain, Computational Neuroscience, Advanced Digital Signal Processing, Systems Biology, Genomics Information;

Xiamen University Xiamen, China Bachelor of Engineering & Bachelor of Economics 09/2008-07/2012 Major: Measurement and Control Technology and Instrumentations, Minor: Economics; GPA: 88/100, Ranking: 2/42; Relevant Coursework: Computer Networks, Analog Circuit, Digital Circuit, Digital Image Processing,

Computer Graphics, Precision Mechanics Design, Testing Technology

Research Experience Reversed Engineering the Fruit Fly Brain New York, NY Columbia Bionet Group 02-2013-Present Made several stages of crossing to balance flies to get those with desired genotypes; Checked Green Fluoresce Protein (GFP) expression in order to locate specific neurons; Used electrophysiology method to record signal from Olfaction Sensory Neuron (OSN) in vivo; Built mathematical model to find correlation between the spiking from neurons in terms of ChR2 and

blue light waveforms, in order to build artificial olfactory system. The Forecast of Arthritis Xiamen, China Xiamen University 09/2010-01/2011 Processed hundreds of pictures of joints, conducted image segmentation, separated bone and tissue,

extracted the information of bone edge, in order to collect materials for light beams refraction; Wrote the program of beads rebound when hitting desk edge so as to simulate the refraction of light

beam in bone joint; Investigated Monte Carlo simulation with random numbers to analyze the programs operation result

in order to get the distribution of light dots in joint, and thereby forecast arthritis.

Publication [1] Luolan Lei, Bingruo Li, Jiao Dai, Ban Wang, Yanping Chen*. Extraction of Lung Electrical Impedance character Points Based on Wavelet Transformation. Journal of Biomedical Engineering. 2012, 29(6): 1197-1200+1206;

Technical Skills Matlab, C, Assembly language, AutoCAD, Multisim Latex, Labview, WinEDR;

Self-motivated, Honest, Enthusiastic, Independent, Innovative

Zeshi Wang 87 hulme ct Apt 308, Stanford, CA, 94305-7424 917-860-4580 zw2221@columbia.edu

Columbia University, Fu Foundation School of Engineering & Applied Science New York, NY

M.S. Electrical Engineering GPA: 3.5/4.0 Expected Dec. 2013

Relevant courses: Digital VLSI Design; Computer Architecture; Advanced Logic Design; Embedded System;

Advanced Digital Electrical Circuit; Advanced Analog Integrated Circuit; Formal SW/HW Verification

Jilin University Changchun, China

B.S. of Electrical Engineering GPA: 3.6/4.0

Relevant course: Semiconductor Physics and Devices; Semiconductor Materials; HDL &ASIC principle;

Digital IC design; Digital Electronic technology; Basis of Circuit Analysis

EDUCATION

PROJECT EXPERIENCE Columbia University New York, NY

Embedded System Design Mar. 2013 --- Jun. 2013

Designed a 2D American Pool Video Game running on the Altera Cyclone II FPGA DE2 board in a group of 5

Successfully implemented the hardware for VGA, keyboard, audio controller in VHDL, the game software

algorithm and user friendly GUI in C, with SOPC builder for the connection

Advanced Logic RTL Design Oct. 2012 --- Jan. 2012

Accomplished the design of a floating-point unit that operates on IEEE 754 floating point numbers for

trigonometric function with variable precisionincluding its Pseudo code, and pipelined ASM specification

Implemented RTL architecture with optimization and wrote VHDL code for all the components

The Sommelier Multi-core Microprocessor Architecture Design Oct. 2012 --- Jan. 2012

Carefully adjusted the architecture through hardware configuration such as core type, memory hierarchy, cache configuration and clock frequency, and optimized software in C with multi-thread execution and loop unrolling

Achieved the best performance and low power dissipation by simulation and analyzing the power and run time

An 8-bit Microcontroller Core VLSI Design Oct. 2012 --- Jan. 2012

Designed the topology and schematic for a 8-bit microcontroller core including ALU, Latches, PLA and SRAM

Optimized the key parameters including sizing, delay, frequency, and area based on IBM 90nm technology

Implemented the manually layout of the processor using Cadence Virtuoso with DRC and LVS clean, and analyzed the run time, frequency and function verification by Spectre and Ultrasim simulations

OTHER EXPERIENCE CUCSSA New Year gala Columbia University, New York

Host 2013

Multicultural Radio Broadcasting, INC New York, NY

Host and DJ at WKDM AM 1380 2013

The Student Union for Department of Electrical Engineering Jilin University, China Minister 2011

Jilin University Changchun, China

Sensor Properties Research: undergraduate research assistant June, 2009---May. 2012

Researched the synthesis and characterization of colloid Carbon Spheres and nanoparticles ZnSnO3

Gained experience in nanofabrication, semiconductor technology, material characterization and testing methods

Acquired good research working experience as a team and leading a dynamic group

COMPUTER SKILLS Programming Languages: C/C++, SystemVerilog, Verilog, VHDL, Perl, Tcl

Applications: Cadence Virtuoso, MATLAB, Eclipse, LTSPICE, QuartusII, ModelSim, Microsoft Office

A Low-Power SIMD Core ASIC Design Feb. 2013 --- Jun. 2013

As part of a member in the team of 9, successfully designed, tested, synthesized, and automatic placed and routed(APR) the low power SIMD core, including function unit bank, a 3264-bit four-port register file,

scoreboard, instruction processing unit and Load/Store and Permute Unit

Analyzed and designed the system level architecture from top to bottom based on ARM-NEON, and implemented the SIMD core with self-defined instruction set and developed the testbenches in Verilog

Formal Verification for SDRAM controller Oct. 2013 --- Nov. 2013

Designed the SDRAM controller including the FIFO, refresh generator, initial and main FSM in SystemVerilog

Formally verified the safety and liveness properties, temporal behaviors, control flows and functional correctness of the controller by developing the assertions in SVA and analyzing with the Questa Formal toolkit

Jonathan (Xunchi) Wu

Address: 4313 Sendero Trail, Plano, TX, 75024 Mobile: (610)763-2234 Email: xw2256@columbia.edu

EDUCATION Columbia University, the Fu Foundation School of Engineering and Applied Science New York, NY M.S. in Electrical Engineering, GPA 3.54/4.0 Expected 12/2013 Relevant Coursework: Digital VLSI Circuits, Advanced Logic Design, Embedded Systems, CAD of Digital Systems, Power Systems Analysis South China University of Technology Guangzhou, China B.E. in Automation, GPA 3.82/4.0 09/2008 06/2012 Honors: National Scholarship (2009), Schneider Scholarship (2010), Siemens A & D Scholarship (2011) Relevant Coursework: Electric Circuits, Digital Electronics, Principles of Automatic Control, Intro to program in C++, Principles of Microcomputer EXPERIENCE CEPREI Laboratory Guangzhou, China Product Application Intern 06/2013 08/2013 Developed technical documentation to provide support for the newly developed information button by interacting with

engineers and customers on a technical level. Performed market and price positioning to gain initiatives via market segment research and competitive product analysis,

which resulted in