jes2 commands summary - pudn.comread.pudn.com/downloads110/doc/454616/jes_command_overview.pdf ·...

74
OS/390 IBM JES2 Commands Summary GX22-0041-06

Upload: duongkhanh

Post on 06-Feb-2018

263 views

Category:

Documents


6 download

TRANSCRIPT

Page 1: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

OS/390 IBM

JES2 Commands Summary

GX22-0041-06

Page 2: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a
Page 3: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

OS/390 IBM

JES2 Commands Summary

GX22-0041-06

Page 4: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Note

Before using this information and the product it supports, be sure to read the general information underAppendix A, “Notices” on page 57.

Seventh Edition, September 2000

This is a major revision of GX22–0041–05.

This edition applies to Version 2 Release 10 of OS/390 (5647-A01) and to all subsequent releases and modificationsuntil otherwise indicated in new editions.

Order publications through your IBM representative or the IBM branch office serving your locality. Publications are notstocked at the address below.

IBM welcomes your comments. A form for readers' comments may be provided at the back of this publication, or youmay address your comments to the following address:

International Business Machines CorporationDepartment 55JA, Mail Station P3842455 South RoadPoughkeepsie, NY 12601-5400United States of America

FAX (United States & Canada): 1+845+432-9405FAX (Other Countries):

Your International Access Code +1+845+432-9405

IBMLink (United States customers only): IBMUSM10(MHVRCFS)Internet e-mail: [email protected] Wide Web: http://www.ibm.com/s390/os390/webqs.html

If you would like a reply, be sure to include your name, address, telephone number, or FAX number.

Make sure to include the following in your comment or note:

� Title and order number of this book� Page number or topic related to your comment

When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any wayit believes appropriate without incurring any obligation to you.

Copyright International Business Machines Corporation 1998, 2000. All rights reserved.US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contractwith IBM Corp.

Page 5: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

About This Book

The information in this booklet is summarized from OS/390 JES2 Commands.

This booklet shows the syntax of all JES2 commands. Preceding the syntax of thecommands is a table that alphabetically lists each JES2 command, the command'sfunction, and the page number where the syntax can be found. This booklet serves asa "quick reference" to JES2 commands.

Who This Book Is ForThis book is intended for use by a system console operator who controls JES2 on asystem running under MVS. This book assumes that the user understands thehardware controls and features of the installation. It also assumes that the userunderstands the general organization and functions of a system.

Determining If a Publication Is CurrentAs needed, IBM updates its publications with new and changed information. For a givenpublication, updates to the hardcopy and associated BookManager softcopy are usuallyavailable at the same time. Sometimes, however, the updates to hardcopy and softcopyare available at different times. Here's how to determine if you are looking at the mostcurrent copy of a publication:

1. At the end of a publication's order number there is a dash followed by two digits,often referred to as the dash level. A publication with a higher dash level is morecurrent than one with a lower dash level. For example, in the publication ordernumber GC28-1747-07, the dash level 07 means that the publication is morecurrent than previous levels, such as 05 or 04.

2. If a hardcopy publication and a softcopy publication have the same dash level, it ispossible that the softcopy publication is more current than the hardcopy publication.Check the dates shown in the Summary of Changes. The softcopy publicationmight have a more recently dated Summary of Changes than the hardcopypublication.

3. To compare softcopy publications, you can check the last two characters of thepublication's filename (also called the book name). The higher the number, themore recent the publication. Also, next to the publication titles in the CD-ROMbooklet and the readme files, there is an asterisk that indicates whether apublication is new or changed.

Copyright IBM Corp. 1998, 2000 iii

Page 6: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

iv OS/390 V2R10 JES2 Commands Summary

Page 7: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Summary of Changes

| Summary of Changes| for GX22-0041-06| OS/390 Version 2 Release 10

| This book is a major revision of OS/390 JES2 Commands Summary, GX22-0041-05.| This book supports OS/390 Version 2 Release 10. The syntax of each JES2 command| is documented without parameter descriptions. See OS/390 JES2 Commands for| explanations of each JES2 command parameter.

| New Commands

| $D Line| For displaying a line.

| $T SPOOL| Allows volumes to be associated with a system (SYSAFF=).

| $ZAPJOB| Allows purging of jobs that affect JES2 restarts.

| Changed Commands

| $ Job Commands| $L Selection Only Limiting Keywords diagram has been added.

| $D FSS| FSSMADDR, FSSMLENG, FSSMPTF, and LONG have been added to the syntax| diagram.

| $D, $T JOBCLASS| SCHENV has been added to the syntax diagram.

| $D MODule| FMID, LASTPFT, LONG, ROUTINES, VERSION, and UNVERSION have been| added to the syntax diagram.

| $D, $T PRTnnnn| ASID, FSSINFO, FSSMADDR, FSSMAPAR, FSSMPTF, FSSMLING, HASPFSSM,| LONG, NAME, and PROC have been added to the syntax diagram.

| $D PRT, PUN| STATUS has been added to the syntax diagram.

| $D SPOOL| SYSAFF= has been added to the syntax diagram.

| $D, $T SPOOLDEF| ACTIVE and VOLUMES have been added to the FENCE= operand.

Copyright IBM Corp. 1998, 2000 v

Page 8: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

| $S SPOOL| SYSAFF= has been added to the syntax diagram.

| $TO Job Output Command| NDISP keyword has been removed from the syntax diagram.

| You must be in "Release 4 mode" to run OS/390 Version 2 Release 10 JES2 since| support for "Pre-release 4 mode" has been dropped. Support for the $ACTIVATE| command is no longer needed since only one checkpoint mode is currently supported.

| This book includes terminology, maintenance, and editorial changes. Technical| changes or additions to the text and illustrations are indicated by a vertical line to the| left of the change.

Summary of Changesfor GX22-0041-05OS/390 Version 2 Release 9

This book is a major revision of OS/390 JES2 Commands Summary, GX22-0041-04.This book supports OS/390 Version 2 Release 9. The syntax of each JES2 command isdocumented without parameter descriptions. See OS/390 JES2 Commands forexplanations of each JES2 command parameter.

New Commands

MnnA new command has been added to send commands to other MAS members.

NnnnnA new command has been added to send commands through the network

Changed Commands

$T, $D JOBCLASSSCHENV has been added to the syntax diagrams. $D JOBCLASS has been addedto the commands list in the front of Chapter 1.

$CO, $POHOLD, HOLDRC, PAGES, and RECORDS have been added to the syntaxdiagrams.

$D MThe syntax diagram has been modified.

$O PAGES and RECORDS have been added to the syntax diagrams.

$T PRTnnnnFSATRACE has been added to the syntax diagram.

$T JobSCHENV has been added to the Selection Limiting Keywords syntax diagram.

This book includes terminology, maintenance, and editorial changes. Technical

vi OS/390 V2R10 JES2 Commands Summary

Page 9: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

changes or additions to the text and illustrations are indicated by a vertical line to theleft of the change.

Summary of Changesfor GX22-0041-04OS/390 Version 2 Release 7

This book is a major revision of OS/390 JES2 Commands Summary, GX22-0041-03.This book contains no "new" JES2 command information and still supports OS/390Version 1 Releases 1-3 and Version 2 Releases 4-6. The syntax of each JES2command is documented without parameter descriptions. See OS/390 JES2Commands for explanations of each JES2 command parameter.

This book includes terminology, maintenance, and editorial changes. Technicalchanges or additions to the text and illustrations are indicated by a vertical line to theleft of the change.

Summary of Changesfor GX22-0041-03OS/390 Version 2 Release 6

This book is a major revision of OS/390 JES2 Commands Summary, GX22-0041-02.This book contains no "new" JES2 command information and still supports OS/390Version 1 Releases 1-3 and Version 2 Release 4. All JES2 commands are documentedin the railroad track syntax form and are consolidated in an effort to reduce the size ofthe publication and to provide quicker lookup of commands. An easy-to-use table ofcontents points to each command syntax. The syntax of each JES2 command isdocumented without parameter descriptions. See OS/390 JES2 Commands forexplanations of each JES2 command parameter.

Summary of Changes vii

Page 10: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

viii OS/390 V2R10 JES2 Commands Summary

Page 11: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Chapter 1. JES2 Commands Summary

Command Function Page

$A A Release all jobs 34

$A job Release specified jobs 50

$ADD CONNECT Add static network connections 15

$ADD APPL Define a new JES2 application 32

$ADD DEStid Define a symbolic destination name 16

$ADD FSS Define a new functional subsystem to JES2 21

$ADD LINE(nnn) Define a RJE line 17

$ADD LOGON(n) Define the JES2/VTAM interface 22

$ADD PRTnnnn Define a local printer 22

$ADD RMT(nnnn) Define an RJE workstation 31

$B PRTnnnn Rnnnn.PRm Backspace printer output 34

$B PUNnn Rnnnn.PUm Backspace punch output 35

$C A Cancel automatic commands 6

$C job Cancel a job 50

$C L(nnnn).dd(n) Cancel NJE device activity 35

$C O job Cancel output groups 46

$C OFFn.dd Cancel a spool offload device 35

$C PRTnnnn Rnnnn.PRm Cancel printer output 35

$C PUNnn Rnnnn.PUm Cancel punch output 35

$C RDRnn Rnnnn.RDm Cancel reader activity 35

$D A Display information about active jobs 6

$D ACTRMT Display active RJE workstations in a MAS 17

$D APPL Define a new JES2 application 32

$D BUFDEF Display local buffers 12

$D CKPTDEF Display the checkpoint definition 14

$D CKPTSPACE Display amount of checkpoint space 7

$D COMPACT Display compaction tables 7

$D CONDEF Display console communication characteristics 8

$D CONNECT Display network connectons that are defined to JES2 15

$D DESTDEF Display symbolic destination displays 8

$D F Display the job output forms queue 10

$D FSS Display functional sybsystem characteristics 21

$D I Display initiator information 41

$D job Display information about specified jobs 50

$D JOBCLASS(n) Display information about the job class characteristics 18

$D JOBPRTY(n) Specify the JES2 job scheduling priority 37

$D LOADMOD Display load module information 45

$D Line Display a line. 54

$D M Display message or send message to job's job log 41

$D MASDEF Display characteristics of the MAS 15

Copyright IBM Corp. 1998, 2000 1

Page 12: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Command Function Page

$D MEMBER Display the status of MAS members 39

$D MODULE Display module information 34

$D N Display job queue information 45

$D NETACCT Display networking acount numbers 35

$D NJEDEF Display the JES2 network environment 11

$D NODE Display node characteristics 35

$D O job Display information about specified output groups 46

$D OFF(n).JR Display offload job receiver characteristics 44

$D OFF(n).JT Display offload job transmitter characteristics 44

$D OFF(n).SR Display offload SYSOUT receiver characteristics 44

$D OFF(n).ST Display offload SYSOUT transmitter characteristics 44

$D OPTSDEF Display start option definitions 8

$D OUTCLASS(n) Display SYSOUT class characteristics output classes 10

$D OUTDEF Display JES2 job output characteristics 8

$D OUTPRTY(n) Display JES2 output scheduling priority 46

$D PATH Display paths from node to node 31

$D PCE Display tracing status for JES2 processors 33

$D PCEDEF Display JES2 PCE definitions 8

$D PRINTDEF Display JES2 printer characteristics 8

$D PRT Rnnnn.PRTm Display printers 22

$D PUNnn Rnnnn.PUm Display punches 29

$D PUNCHDEF Display JES2 punch characteristics 8

$D Q Display the number of jobs queued 7

$D R(n).CON Display specified remote console 16

$D RDI Display status of internal reader 25

$D RDRnn Rnnnn.RDm Display a reader 25

$D REBLD Display jobs on the rebuild queue 8

$D RECVopts Display JES2 recovery options 8

$D REDIRECT Display Redirect responses 31

$D SMFDEF Display SMF buffers 8

$D SPOOL Display spool volume usage 12

$D SPOOLDEF Dsiplay the JES2 spooling environment 38

$D SSI Display subsystem interface function information 21

$D SUBNET Display subnets and node names 8

$D SUBTDEF Display JES2 subtask definitions 8

$D TPDEF Display JES2 teleprocessing characteristics 12

$D TRACEDEF Display the JES2 trace environment chatacteristics 8

$D U Display the status of all JES2 devices 17

$D U,LINEn $D NODE Display node attributes 35

$DEL CONNECT Delete static connections 15

$DEL DEStid Delete a symbolic destination name 16

$E CKPTLOCK Reset the checkpoint lock 14

$E job Restart a currently executing job 50

$E L(nnnn).dd(n) Restart NJE device activity 35

$E LINE(nnn) Restart RJE line activity 17

$E LOGON(n) Restart the JES2/VTAM interface 22

$E MEMBER Restart jobs from a failed member 39

2 OS/390 V2R10 JES2 Commands Summary

Page 13: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Command Function Page

$E OFFn.JT OFFn.ST Restart an offload transmitter 35

$E PRTnnnn Rnnnn.PRm Restart printer activity 34

$E PUNnn Rnnnn.PUm Restart punch activity 35

$F PRTnnnn Rnnnn.PRm Advance printer output 34

$F PUnn Rnnnn.PUm Advance punch output 35

$G A Release a job at another node 40

$G C Cancel a job at another node 40

$G D Display infromation for a job at another node 40

$G H Hold a job at another node 40

$G R Request another node to route a job for execution 40

$G R Request another node to route job output 40

$H A Hold all jobs 34

$H job Hold specified jobs 50

$I PRTnnnn Rnnnn.Pm Interrupt printer activity 34

$I PUNnn Rnnnn.PUm Interrupt punch activity 35

$L job Display count of output group information 46

$Mnn Send Commands to Other MAS Members 54

$Nnnnn Send Commands through the Network 54

$N PRTnnnn Rnnnn.PRm Repeat printer output 34

$N PUNnn Rnnnn.PUm Repeat punch output 35

$O Release or cancel held output data sets 50

$P Stop JES2 processing 41

$P I Stop an initiator 41

$P JES2 Withdraw JES2 from the system 41

$P job Purge a job 50

$P L(nnnn).dd(n) Stop an NJE device 35

$P LINE(nnn) Stop an RJE line 17

$P LOGON(n) Stop the JES2/VTAM interface 22

$P O job Cancel output groups 46

$P OFFn.dd Drain an offload transmitter/receiver 35

$P OFFLOADn Drain an offload device 43

$P PRTnnnn Rnnnn.PRm Stop a printer 35

$P PUNnn Rnnnn.PUm Stop a punch 35

$P RDRnn Rnnnn.RDm Stop a reader 35

$P RMT(nnnn) Disconnect an RJE workstaiton 42

$P SPOOL Drain a spool volume 41

$P TRACE(n) Deactivate trace identifiers 42

$P XEQ Stop initiation of batch jobs into execution 41

$R,D= Route job output 11

$R XEQ Route specified jobs for execution 11

$S Start JES2 processing 41

$S A Start automatic command processing 41

$S I Start an initiator 41

$S job Initiate a batch job into execution 41

$S L(nnnn).dd(n) Start an NJE device 35

$S LINE(nnn) Start an RJE line 17

$S LOGON(n) Start the JES2/VTAM interface 22

Chapter 1. JES2 Commands Summary 3

Page 14: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Command Function Page

$S N Start an SNA applicaton-to-application session with another node 41

$S N,LINExx Establish an NJE connection with an adjacent node 41

$S OFFn.dd Start an offload transmitter/receiver 35

$S OFFLOAD Start an offload device 43

$S PRTnnnn Rnnnn.PRm Start a printer 35

$S PUNnn Rnnnn.PUm Start a punch 35

$S RDRnn Rnnnn.RDm Start a reader 35

$S RMT(nnnn) Automatically connect an SNA RJE workstation 42

$S Spool Start a spool volume 41

$S TRACE(n) Activate a trace identifier 42

$S XEQ Start initiation of batch jobs into execution 41

$T A Display, specifiy, and modify automatic commands 6

$T APPL Change an application's characteristics 32

$T BUFDEF Modify local buffers 12

$T CKPTDEF Control the checkpoint definition 14

$T CKPTSPACE Control amount of checkpoint space 7

$T CONDEF Control console communication characteristics 9

$T CONNECT Change static network connections that were prevously defined 15

$T DEBUG Control the JES2 debug option 13

$T DESTDEF Control symbolic destination displays 9

$T DEStid Change the route code associated with a symbolic destination name 16

$T ESTBYTE Specify estimated amount of spool space needed for job output 37

$T ESTLNCT Specify the estimated printline count for job output 37

$T ESTPAGE Specify the estimated page count for job output 37

$T ESTPUN Specify the estiate number of punched cards for job output 37

$T ESTIME Specify the estimated execution time for jobs 37

$T EXIT(nnn) Specify JES2 Exits 38

$T FSS Change a functional subsystem's characteristics 21

$T I Assign initiator classes 41

$T INTRDR Control internal readers 28

$T job Change a job's class, scheduling priority, or member affinity 50

$T JOBCLASS(n) Set job class characteristics 18

$T JOBCLASS(n) Specify an XBM procedure to be used for jobs in a selected class 18

$T JOBCLASS(n) Release job queues 18

$T JOBCLASS(n) Hold Job Queues 18

$T JOBDEF Specify the JES2 job characteristics 20

$T L(nnnn).dd(n) Control work selection on an NJE device 43

$T LINE(nnn) Disconnect RJE line, assign password, or diagnose RJE problems 17

$T LOGON(n) Assign password to the JES2/VTAM, diagnose SNA problems 22

$T MASDEF Control the MAS environment 15

$T MEMBER Change a member's operational mode 39

$T NJEDEF Specify the JES2 network environment 11

$T NODE Change node characteristics 35

$T NUM Set the JES2 internal job numbers 9

$T O job Set output characteristics 46

$T OFF(n).JR Specify offload job receiver characteristics 44

$T OFF(n).JT Specify offload job transmitter characteristics 44

4 OS/390 V2R10 JES2 Commands Summary

Page 15: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Command Function Page

$T OFF(n).SR Specify offload SYSOUT receiver characteristics 44

$T OFF(n).ST Specify offload SYSOUT transmitter characteristics 44

$T OUTCLASS(n) Set SYSOUT class characteristics output classes 10

$T OUTDEF Specify JES2 job output characteristics 9

$T OUTPRTY(n) Specify JES2 output scheduling priority 46

$T PCE Trace all JES2 processors of a given type (start/stop tracing) 33

$T PRINTDEF Specify JES2 printer characteristics 9

$T PRTnnnn Rnnnn.PRm Specify printer characteristics and options 22

$T PUNnn Rnnnn.PUm Specify punch characteristics and options 29

$T RDRnn Rnnnn.RDm Assign reader characteristics, hold all jobs, and control tracing 27

$T RECVopts Control JES2 recovery options 9

$T REDIRECT Redirect responses to commands entered at the entry console 31

$T RMT(nnnn) Set an RJE workstation's characteristics 31

$T SMFDEF Modify SMF buffers 9

$T SPOOL Modify a Spool Volume| 56

$T SPOOLDEF Control the JES2 spooling environment 38

$T SSI(n) Control subsystem interface function tracing 21

$T TPDEF Specify JES2 teleprocessing characteriestics 12

$T TRACEDEF Specify the JES2 trace environment chatacteristics 9

$VS Enter MVS system commands through JES2 53

$Z A Halt automatic command processing 41

$Z I Halt an initiator 41

$Z OFFLOADn Halt an offload device 43

$Z PRTnnnn Rnnnnn.PRm Halt printer activity 35

$Z PUNnn Rnnnn.PUm Halt punch acitivity 35

$Z RDRnn Halt a reader 35

$Z SPOOL Halt a spool volume 41

$ZAPJOB Remove Job Structure from Job Queue| 56

Chapter 1. JES2 Commands Summary 5

Page 16: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

JES2 Commands Common Syntax ElementsMany JES2 commands use the following elements in their syntax. Refer to theseelements as required when interpreting a command's syntax.

L=:├─ ─,L=─ ──┬ ┬─a────── ────────────────────────────────────┤ ├ ┤─cc───── ├ ┤─cca──── ├ ┤─name─── └ ┘─name–a─

Numeric:├─ ──┬ ┬ ─ ─n ──┬ ┬─────────── ──────────────── ───────────────┤ │ │└ ┘── - ──┬ ┬─n─ │ │└ ┘─�─ │ │┌ ┐─,──────────────────────── └ ┘──( ───� ┴─ ─── ──┬ ┬─n─ ──┬ ┬─────────── ) └ ┘─�─ └ ┘── - ──┬ ┬─n─ └ ┘─�─

Destination:├─ ──┬ ┬──┬ ┬─LOCAL──── ───── ──────────────────────────────┤ │ │└ ┘─ANYLOCAL─ ├ ┤──┬ ┬ ─Nnnnn──── ───── │ │└ ┘─nodename─ ├ ┤─destid────────────

├ ┤──NnnnnRmmmm ───────├ ┤──Ummmm ────────────├ ┤──node. ──┬ ┬─remote─

│ │├ ┤─destid─ │ │└ ┘─�────── ├ ┤─�───────────────── ├ ┤─remote──────────── └ ┘─userid────────────

Identifier:├─ ── ──┬ ┬──id ──┬ ┬─────────── ──────────────── ────────────┤ │ │└ ┘──- ──┬ ┬─id─ │ │└ ┘─�──

├ ┤──'id' ───────────────────────────── │ │┌ ┐─,───────────────────────── └ ┘──( ───� ┴┬ ┬── ──┬ ┬─id─ ──┬ ┬─────────── ) │ │└ ┘─�── └ ┘──- ──┬ ┬─id─ │ │└ ┘─�── ├ ┤─id──────────────────────

└ ┘──'id' ───────────────────

Value:├─ ──┬ ┬──'value' ────────── ──────────────────────────────┤ │ │┌ ┐─,───────── └ ┘──( ───� ┴┬ ┬─value─── )

└ ┘──'value'

$D A - Display Information About Active Jobs

��─ ─── ──$D─ ─A─ ──┬ ┬───────── ──┬ ┬───────────────────────── ──┬ ┬─────────── ──┬ ┬─────────── ─────────────�!├ ┤──┬ ┬─,J── ├ ┤─,ALL──────────────────── └ ┘──,V=volser └ ┘─┤ L= ├────(1)

│ │└ ┘─JOB─ │ │┌ ┐─,───────├ ┤──┬ ┬─,S── └ ┘──,memname( ───� ┴─memname─ )

│ │└ ┘─STC─ ├ ┤──┬ ┬─,T── │ │└ ┘─TSU─ ├ ┤──┬ ┬─,X── │ │└ ┘─XEQ─ └ ┘──┬ ┬─,D── └ ┘─DEV─

Note:1 See “JES2 Commands Common Syntax Elements.”

$T, $C A - Display, Specify, Modify, Cancel Automatic Commands

��─ ──┬ ┬─$T─ ─A─ ──┬ ┬────────────────────── ──┬ ┬────────────────────── ─────────────────────────────────�! └ ┘─$C─ └ ┘─┤ $T ONLY Keywords ├─ └ ┘─┤ $C ONLY Keywords ├─

$T ONLY Keywords: ┌ ┐─;──────── ┌ ┐─;────────├─ ──┬ ┬ ─,ALL─ ──┬ ┬──,I=ssss ──,'command ───� ┴─command'─ ──┬ ┬──,I=ssss ──,'command ───� ┴─command'─ ────────────�

│ │└ ┘──,T=hh.mm ──────────────────────── └ ┘──,T=hh.mm ──────────────────────── │ │┌ ┐─;──────── └ ┘ ─cccc─ ──┬ ┬──,I=ssss ──,'command ───� ┴─command'─

└ ┘──,T=hh.mm ────────────────────────

6 OS/390 V2R10 JES2 Commands Summary

Page 17: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬─────────── ───────────────────────────────────────────────────────────────────────────────────┤ └ ┘─┤ L= ├────(1)

$C ONLY Keywords:├─ ──┬ ┬─,ALL─ ────────────────────────────────────────────────────────────────────────────────────────┤ └ ┘─cccc─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$D Q - Display the Number of Jobs Queued

��─ ─$D─ ─Q─ ──┬ ┬────────── ──┬ ┬─────────── ─,Q=─ ──┬ ┬ ─CNV─ ──┬ ┬─CLASS─── ───── ──┬ ┬─────────── ──────────────�├ ┤─,IND───── └ ┘──,V=volser │ │├ ┤──┬ ┬─STC─ └ ┘─┤ L= ├────(1)

├ ┤─,memname─ │ ││ │└ ┘─$───├ ┤─,ANY───── │ │├ ┤──┬ ┬─TSU─├ ┤─,ALL───── │ ││ │└ ┘─@───└ ┘─,IND───── │ │└ ┘ ─�───────

├ ┤ ─XEQ─ ──┬ ┬─CLASS─── ───── │ │├ ┤──┬ ┬─STC─ │ ││ │└ ┘─$─── │ │├ ┤──┬ ┬─TSU─ │ ││ │└ ┘─@─── │ │└ ┘ ─�─────── ├ ┤─OUT─────────────────── ├ ┤─PPU─────────────────── ├ ┤─HOLD────────────────── └ ┘ ─XMT─ ──┬ ┬──┬ ┬─LOCAL──── │ │└ ┘─ANYLOCAL─ ├ ┤──┬ ┬─N──nnnn── │ │└ ┘─nodename─ └ ┘ ─destid───────

�─ ──┬ ┬──────────────────── ─────────────────────────────────────────────────────────────────────────�! └ ┘─┤ Destination ├────(1)

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$D COMPACT - Display JES2 SNA NJE Application(s)

��─ ──$D ──COMPACT ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────────── ───────�!└ ┘───┤ Selection limiting keywords ├─ └ ┘───┤ Display limiting keywords ├─

Display limiting keywords:├─ ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬───────── ──────────────────────────────────────────────────────────────┤

└ ┘──,CHARS └ ┘──,NAME └ ┘──,NUMBER

Selection limiting keywords:├─ ──┬ ┬────────────────────────── ──┬ ┬────────────────────────────── ──────────────────────────────────┤ └ ┘──, ──┬ ┬─── NAME ──┬ ┬─=── name └ ┘──, ──┬ ┬─── NUMBER ──┬ ┬─=── number └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

$D, $T CKPTSPACE, Display/Control Amount of Space in the Checkpoint

��─ ──┬ ┬─$D─ ──CKPTSPACe ──┬ ┬───────────────────────────── ──┬ ┬───────────────────────────── ───────────�! └ ┘─$T─ └ ┘───┤ $D CKPTSPACe keywords ├─ └ ┘───┤ $T CKPTSPACe keywords ├─

$T CKPTSPACe keywords:├─ ──┬ ┬────────────────── ──┬ ┬──────────────────── ────────────────────────────────────────────────────┤

└ ┘──,BERTNUM=bertnum └ ┘──,BERTWARN=bertwarn

$D CKPTSPACe keywords:

Chapter 1. JES2 Commands Summary 7

Page 18: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬──────────────────────────────────── ──────────────┤└ ┘──,BERTFREE └ ┘──,BERTNUM └ ┘──,BERTWARN │ │┌ ┐─,───────────

└ ┘──,RECORDS ─=──(─ ───� ┴┬ ┬─CKPT1_MAX─ ─)─ ├ ┤─CKPT2_MAX─ └ ┘─INUSE─────

$D PUNCHDEF, $D PRINTDEF, $D OPTSDEF, $D SMFDEF, $D CONDEF, $DDESTDEF, $D TRACEDEF, $D SUBTDEF, $D SUBNET, $D REBLD, $D RECVopts,$D PCEDEF

��─ ─$D PUNCHDEF─ ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────────── ─────────────────────────────────────────�!└ ┘──,CCWNUM └ ┘──,DBLBUFR └ ┘──,RDBLBUFR

��─ ─$D PRINTDEF─ ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬────── ──┬ ┬───────── ──┬ ┬────────── ─────�└ ┘──,CCWNUM └ ┘──,DBLBUFR └ ┘──,RDBLBUFR └ ┘──,FCB └ ┘──,LINECT └ ┘──,NEWPAGE

�─ ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬────── ──┬ ┬─────────────────────────── ───────�└ ┘──,NIFCB └ ┘──,NIFLASH └ ┘──,NIUCS └ ┘──,TRANS └ ┘──,UCS │ │┌ ┐─,────────

└ ┘──,SEPPAGE=( ───� ┴┬ ┬──LOCAL ─ ) └ ┘──REMOTE

�─ ──┬ ┬────────── ───────────────────────────────────────────────────────────────────────────────────�!└ ┘──,NEWPAGE

��─ ─$D OPTSDEF─ ──┬ ┬─────────── ──┬ ┬──────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬───────────── ──────────�!└ ┘──,HASPPARM └ ┘──,SPOOL └ ┘──,STARTopt └ ┘──,STARTYPE └ ┘──,UNACTIVATE

��─ ─$D SMFDEF─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬────────── ────────────────────────────────────────────�!└ ┘──,BUFFREE └ ┘──,BUFNUM └ ┘──,BUFWARN

��─ ─$D CONDEF─ ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬────────── ────�└ ┘──,AUTOCMD └ ┘──,BUFFREE └ ┘──,BUFNUM └ ┘──,BUFWARN └ ┘──,CMDNUM └ ┘──,CONCHAR

�─ ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬──────── ───────────────�!└ ┘──,DISPLEN └ ┘──,DISPMAX └ ┘──,MASMSG └ ┘──,RDIRAREA └ ┘──,RDRCHAR └ ┘──,SCOPE

��─ ─$D OUTDEF─ ──┬ ┬─────────── ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬─────────── ──�└ ┘──,BRODCAST └ ┘──,COPIES └ ┘──,DMNDSET └ ┘──,JOEFREE └ ┘──,JOENUM └ ┘──,JOERBLDQ

�─ ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬─────────── ────────────�└ ┘──,JOEWARN └ ┘──,OUTTIME └ ┘──,PRTYHIGH └ ┘──,PRTYLOW └ ┘──,PRTYOUT └ ┘──,PRYORATE

�─ ──┬ ┬───────── ──┬ ┬────────── ──────────────────────────────────────────────────────────────────────�!└ ┘──,SEGLIM └ ┘──,STDFORM

��─ ─$D DESTDEF─ ──┬ ┬─────────── ──┬ ┬──────── ──┬ ┬─────────── ──┬ ┬──────── ──┬ ┬───────── ──┬ ┬────────── ────�└ ┘──,LOCALNUM └ ┘──,Ndest └ ┘──,NODENAME └ ┘──,Rdest └ ┘──,RMdest └ ┘──,RMTdest

�─ ──┬ ┬─────────── ──┬ ┬──────── ──────────────────────────────────────────────────────────────────────�!└ ┘──,SHOWUSER └ ┘──,Udest

��─ ─$D TRACEDEF─ ──┬ ┬───────── ──┬ ┬────────────────────── ──┬ ┬──────── ──┬ ┬─────────────────────────── ──�└ ┘──,ACTIVE │ │┌ ┐─,─────── └ ┘──,PAGES │ │┌ ┐─,──────────

└ ┘──,LOG=( ───� ┴┬ ┬──CLASS ) └ ┘──,STATS=( ───� ┴┬ ┬──DISCARDS ) ├ ┤──SIZE ─ ├ ┤──IDS ───── └ ┘──START └ ┘──TOTDISC ─

�─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬────────── ────────────────────────────────────────────────────────�!└ ┘──,TABFREE └ ┘──,TABLES └ ┘──,TABWARN

��─ ─$D SUBTDEF─ ──┬ ┬────────── ──────────────────────────────────────────────────────────────────────�!└ ┘──,GSUBNUM

��──$D REBLD───────────────────────────────────────────────────────────────────────────────────────�!

8 OS/390 V2R10 JES2 Commands Summary

Page 19: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

��─ ─$D PCEDEF─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬─────────── ─�!└ ┘──,CNVTNUM └ ┘──,OUTNUM └ ┘──,PSONUM └ ┘──,PURGENUM └ ┘──,SPINNUM └ ┘──,STACKNUM

��─ ──┬ ┬ ─$D SUBNET─── ── ──┬ ┬────────────── ──┬ ┬─────────── ──┬ ┬────────────── ──────────────────────────�! └ ┘ ─$D RECVopts─ └ ┘─┤ Value ├────(1) └ ┘──,COUNT───(2) └ ┘──,INTERVAL───(2)

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 $D RECVopts only.

$T CONDEF, $T OUTDEF, $T TRACEDEF, $T DESTDEF, $T SMFDEF, $TPRINTDEF, $T NUM, $T RECVopts

��─ ──$T ──┬ ┬─CONDEF──┤ CONDEF Keywords ├───── ───────────────────────────────────────────────────────�! ├ ┤─OUTDEF──┤ OUTDEF Keywords ├───── ├ ┤─TRACEDEF──┤ TRACEDEF Keywords ├─ ├ ┤─DESTDEF──┤ DESTDEF Keywords ├─── ├ ┤─SMFDEF──┤ SMFDEF Keywords ├───── ├ ┤─PRINTDEF──┤ PRINTDEF Keywords ├─ ├ ┤─NUM─ ──,BASE=nnnnn ─────────────── └ ┘─RECVopts──┤ RECVopts Keywords ├─

CONDEF Keywords:├─ ──┬ ┬────────────── ──┬ ┬─────────────── ──┬ ┬────────────── ──┬ ┬──────────── ──┬ ┬────────────── ─────────�

└ ┘──,BUFNUM=nnnn └ ┘──,BUFWARN=nnnn └ ┘──,CMDNUM=nnnn └ ┘──,CONCHAR=c └ ┘──,DISPLEN=nnn

�─ ──┬ ┬───────────────────── ──┬ ┬───────────── ──┬ ┬───────────── ──┬ ┬──────────── ───────────────────────┤└ ┘──,DISPMAX=nnnnnnnnnn └ ┘──,MASMSG=nnn └ ┘──,RDIRAREA=c └ ┘──,RDRCHAR=c

OUTDEF Keywords:├─ ──┬ ┬───────────────────── ──┬ ┬───────────── ──┬ ┬──────────────── ──┬ ┬────────────── ──────────────────�

└ ┘──,BRODCAST= ──┬ ┬─No── └ ┘──,COPIES=nnn └ ┘──,JOENUM=nnnnnn └ ┘──,JOEWARN=nnn └ ┘─Yes─

�─ ──┬ ┬─────────────────────── ──┬ ┬─────────────── ──┬ ┬────────────── ──┬ ┬──────────────────── ──────────�└ ┘──,OUTTIME= ──┬ ┬─CREATE─ └ ┘──,PRTYHIGH=nnn └ ┘──,PRTYLOW=nnn └ ┘──,PRTYOUT= ──┬ ┬─No──

└ ┘─UPDATE─ └ ┘─Yes─

�─ ──┬ ┬──────────────── ──┬ ┬─────────────── ───────────────────────────────────────────────────────────┤└ ┘──,PRYORATE=nnnn └ ┘──,SEGLIM=nnnnn

TRACEDEF Keywords:├─ ──┬ ┬─────────────────── ──┬ ┬──────────────────────────────── ──┬ ┬─────── ──┬ ┬────────────── ──────────�

└ ┘──,ACTIVE= ──┬ ┬─No── │ │┌ ┐─,───────────────── └ ┘──,SPIN └ ┘──,TABLES=nnnn└ ┘─Yes─ └ ┘──,LOG=( ───� ┴┬ ┬──CLASS=c ──────── )

├ ┤──SIZE=nnnnnnnnnn└ ┘──START= ──┬ ┬─No──

└ ┘─Yes─

�─ ──┬ ┬────────────── ────────────────────────────────────────────────────────────────────────────────┤└ ┘──,TABWARN=nnn

DESTDEF Keywords:├─ ──┬ ┬─────────────────────────── ───────────────────────────────────────────────────────────────────┤

└ ┘──,SHOWUSER= ──┬ ┬─No──────── ├ ┤─NOLOCAL─── ├ ┤─WITH────── └ ┘─WITHLOCAL─

SMFDEF Keywords:├─ ──┬ ┬────────────────── ────────────────────────────────────────────────────────────────────────────┤

└ ┘──,BUFWARN=bufwarn

PRINTDEF Keywords:

Chapter 1. JES2 Commands Summary 9

Page 20: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬───────────── ──┬ ┬──────────────────── ──┬ ┬──────────────────────────────────────── ─────────────┤└ ┘──,LINECT=nnn └ ┘──,NEWPAGE= ──┬ ┬─ALL─ │ │┌ ┐─,─────────────────────

└ ┘─1─── └ ┘──,SEPPAGE=( ───� ┴┬ ┬──LOCAL= ──┬ ┬─DOUBLE─ ─ ) │ │├ ┤─FULL─── │ │├ ┤─HALF─── │ │└ ┘─NONE───

└ ┘──REMOTE= ──┬ ┬─DOUBLE─ ├ ┤─FULL─── ├ ┤─HALF─── └ ┘─NONE───

RECVopts Keywords:├─ ──┬ ┬────────────── ──┬ ┬──────── ──┬ ┬─────────── ─────────────────────────────────────────────────────┤ └ ┘─┤ Value ├────(1) └ ┘──,COUNT └ ┘──,INTERVAL

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$T, $D OUTCLASS(n) - Set SYSOUT Class Characteristics

��─ ──┬ ┬─$T─ ──OUTCLASS─┤ Identifier ├────(1) ──┬ ┬────────────────────── ──────────────────────────────────� └ ┘─$D─ └ ┘─┤ $T OUTCLASS ONLY ├─

�─ ──┬ ┬──────────────────────────────────── ──┬ ┬────────────────────────────────── ───────────────────�! └ ┘─┤ $D Selection Limiting Keywords ├─ └ ┘─┤ $D Display Limiting Keywords ├─

$T OUTCLASS ONLY:├─ ──┬ ┬────────────────────────────────────────────────────────────────── ────────────────────────────┤

└ ┘──,OUTDisp= ──┬ ┬─┤ Option List ├─────────────────────────────────── └ ┘──( ──┬ ┬─────────────────── ──┬ ┬──────────────────── ) └ ┘───┤ Option List ├─ └ ┘──,─┤ Option List ├─

$D Selection Limiting Keywords:├─ ──┬ ┬──────────────────────────────────── ──┬ ┬──────────────────────────────────── ──────────────────� └ ┘──, ──┬ ┬─── BLNKTrnc ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── OUTPUT ──┬ ┬─ =── ──┬ ┬─DUMMY─ └ ┘─/─ └ ┘─ ê=─ └ ┘─Yes─ └ ┘─/─ └ ┘─ ê=─ ├ ┤─PRINT─ └ ┘─PUNCH─

�─ ──┬ ┬─────────────────────────────────── ───────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── TRKCELL ──┬ ┬─ =── ──┬ ┬─No── └ ┘─/─ └ ┘─ ê=─ └ ┘─Yes─

$D Display Limiting Keywords:├─ ──┬ ┬─────────────── ──┬ ┬──────────── ──┬ ┬─────────── ──┬ ┬──────────── ────────────────────────────────┤ └ ┘─,──BLNKT──rnc─ └ ┘ ─,──OUTDisp─ └ ┘ ─,──OUTPUT─ └ ┘ ─,──TRKCELL─

Option List:├─ ──┬ ┬─H───── ───────────────────────────────────────────────────────────────────────────────────────┤ ├ ┤─HOLD── ├ ┤─K───── ├ ┤─KEEP── ├ ┤─L───── ├ ┤─LEAVE─ ├ ┤─P───── ├ ┤─PURGE─ ├ ┤─W───── └ ┘─WRITE─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$D F Display Output Forms

��─ ─$D F─ ──┬ ┬──────────────────────── ──┬ ┬──────── ──┬ ┬─────────────── ──┬ ┬─────────── ────────────────�! └ ┘─R=──┤ Destination ├────(1) └ ┘─┤ J= ├─ └ ┘ ─,D=─ ──┬ ┬─H──── └ ┘─┤ L= ├────(1)

├ ┤─HELD─ ├ ┤─A──── └ ┘─ALL──

J=:

10 OS/390 V2R10 JES2 Commands Summary

Page 21: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ─,J=─ ──┬ ┬─── ─ ─JOB──n -─ ─JOB──m─ ───────────────────────────────────────────────────────────────────┤ ├ ┤─── ─ ─STC──n -─ ─STC──m─ ├ ┤─── ─ ─TSU──m -─ ─TSU──m─ └ ┘─'jobname'────────────

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$R - Route Job Output, $R XEQ Route Specific Jobs for Execution

��─ ──┬ ┬─$R──┤ $R Options ├───────── ────────────────────────────────────────────────────────────────�! └ ┘─$R XEQ──┤ $R XEQ Options ├─

$R Options:├─ ──┬ ┬──ALL ──┬ ┬───────────────────────── ──┬ ┬─┤ J= ├───────────────── ─,D=──┤ Destination ├────(1) ───────� │ │└ ┘─,Q=──C1──(──...──C36──)─ └ ┘ ─R=──┤ Destination ├────(1)

├ ┤─PRT────────────────────────────── └ ┘─PUN──────────────────────────────

�─ ──┬ ┬─────────────────────────── ───────────────────────────────────────────────────────────────────┤ │ │┌ ┐─,────────

└ ┘──,OUTDisp=( ───� ┴─outdisp,─ )

J=:├─ ─,J=─ ──┬ ┬──┬ ┬─J──────────────── ───────────────────────────────────────────────────────────────────┤ │ │├ ┤─JOB──n─────────── │ │└ ┘─JOB──n -──JOB──m─ ├ ┤──┬ ┬─S──────────────── │ │├ ┤─STC──n─────────── │ │└ ┘─STC──n -──STC──m─ ├ ┤──┬ ┬─T──────────────── │ │├ ┤─TSU──n─────────── │ │└ ┘─TSU──n -──TSU──m─ └ ┘─'jobname'────────────

$R XEQ Options:├─ ─,J=─ ──┬ ┬ ─J───────── ─,R=─ ──┬ ┬──┬ ┬─LOCAL──── ─,D=─ ──┬ ┬──┬ ┬─LOCAL──── ────────────────────────────────┤ ├ ┤─JOB──n──── │ │└ ┘─ANYLOCAL─ │ │└ ┘─ANYLOCAL─ └ ┘ ─'jobname'─ ├ ┤──┬ ┬─N──nnnn── ├ ┤──┬ ┬─N──nnnn── │ │└ ┘─nodename─ │ │└ ┘─nodename─ └ ┘─destid─────── └ ┘─destid───────

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$D, $T NJEDEF - Display/Control the JES2 Network Environment

��─ ──┬ ┬─$D─ ──NJEDEF ──┬ ┬────────────────────── ──┬ ┬────────────────────── ────────────────────────────�! └ ┘─$T─ └ ┘─┤ $D ONLY Keywords ├─ └ ┘─┤ $T ONLY Keywords ├─

$D ONLY Keywords:├─ ──┬ ┬──────── ──┬ ┬─────────────────────────────── ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬────────── ─────────────�

└ ┘──,DELAY └ ┘──,HDRBUF ──┬ ┬────────────────── └ ┘──,JRNUM └ ┘──,JTNUM └ ┘──,LINENUM │ │┌ ┐─,───────

└ ┘──=( ───� ┴┬ ┬──FREE ─ ) ├ ┤──LIMIT └ ┘──WARN ─

�─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬────────── ────�└ ┘──,MAILMSG └ ┘──,MAXHOP └ ┘──,NODENUM └ ┘──,OWNNAME └ ┘──,OWNNODE └ ┘──,PATH └ ┘──,RESTMAX

�─ ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬────────── ───────────────────────────────┤└ ┘──,RESTNODE └ ┘──,RESTTOL └ ┘──,SRNUM └ ┘──,STNUM └ ┘──,TIMEtol

$T ONLY Keywords:├─ ──┬ ┬──────────── ──┬ ┬────────────────────────────── ──┬ ┬──────────────────── ──┬ ┬────────────── ──────�

└ ┘──,DELAY=nnn │ │┌ ┐─,──────────── └ ┘──,MAILMSG= ──┬ ┬─No── └ ┘──,MAXHOP=nnnn└ ┘──,HDRBUF=( ───� ┴┬ ┬──LIMIT=nnnn ) └ ┘─Yes─

└ ┘──WARN=nnn ──

�─ ──┬ ┬─────────────────── ──┬ ┬──────────────── ──┬ ┬─────────────── ──┬ ┬─────────────────── ─────────────┤└ ┘──,RESTMAX=nnnnnnnn └ ┘──,RESTNODE=nnnn └ ┘──,RESTTOL=nnnn └ ┘──,─TIME──tol─=nnnn

Chapter 1. JES2 Commands Summary 11

Page 22: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$D, $T TPDEF , $D, $T BUFDEF - Display/Control Current TeleprocessingCharacteristics, $D PCEDEF

��─ ──┬ ┬ ──┬ ┬ ─$D──TPDEF─ ──┬ ┬──────────────────────────── ─────────────────────────── ──────────────────�! │ ││ │└ ┘─┤ $D TPDEF ONLY Keywords ├─ │ │└ ┘ ─$T──TPDEF─ ──┬ ┬──────────────────────────── │ │└ ┘─┤ $T TPDEF ONLY Keywords ├─ └ ┘ ──┬ ┬ ─$T──BUFDEF─ ──┬ ┬───────────────────── ───────────────────────────────── │ │└ ┘─┤ Buffer Keywords ├─ └ ┘ ─$D──BUFDEF─ ──┬ ┬───────────────────── ──┬ ┬───────────────────────────── └ ┘─┤ Buffer Keywords ├─ └ ┘─┤ $D Only Buffer Keywords ├─

$D TPDEF ONLY Keywords:├─ ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬─────────────────────────────── ──────────────────────────────────�

└ ┘──,AUTOINTV └ ┘──,AUTONUM └ ┘──,BSCBUF ──┬ ┬────────────────── │ │┌ ┐─,───────

└ ┘──=( ───� ┴┬ ┬──FREE ─ ) ├ ┤──LIMIT ├ ┤──SIZE ─ └ ┘──WARN ─

�─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────── ──┬ ┬───────── ──┬ ┬───────── ──────────────────────�└ ┘──,SNABUF ──┬ ┬────────────────── └ ┘──,MBUFSIZE └ ┘──,RMTMSG └ ┘──,RMTNUM

│ │┌ ┐─,───────└ ┘──=( ───� ┴┬ ┬──FREE ─ )

├ ┤──LIMIT ├ ┤──SIZE ─ └ ┘──WARN ─

�─ ──┬ ┬────────────────────────────────── ────────────────────────────────────────────────────────────┤└ ┘──,SESSIONS ──┬ ┬───────────────────

│ │┌ ┐─,────────└ ┘──=( ───� ┴┬ ┬──FREE ── )

├ ┤──FROZEN ├ ┤──LIMIT ─ └ ┘──WARN ──

$T TPDEF ONLY Keywords:├─ ──┬ ┬─────────────── ──┬ ┬───────────────────── ──┬ ┬───────────── ─────────────────────────────────────�

└ ┘──,AUTOINTV=nnn └ ┘─┤ Buffer Keywords ├─ └ ┘──,RMTMSG=nnn

�─ ──┬ ┬──────────────────────────────── ──────────────────────────────────────────────────────────────┤ │ │┌ ┐─,────────────

└ ┘──,SESSIONS=( ───� ┴┬ ┬──LIMIT=nnnn )└ ┘──WARN=nnn ──

Buffer Keywords:├─ ──┬ ┬────────────────────────────── ──┬ ┬────────────────────────────── ──────────────────────────────┤ │ │┌ ┐─,──────────── │ │┌ ┐─,────────────

└ ┘──,SNABUF=( ───� ┴┬ ┬──LIMIT=nnnn ) └ ┘──,BSCBUF=( ───� ┴┬ ┬──LIMIT=nnnn )└ ┘──WARN=nnn ── └ ┘──WARN=nnn ──

$D Only Buffer Keywords:├─ ──┬ ┬───────────────────────── ──┬ ┬───────────────────────── ────────────────────────────────────────┤ │ │┌ ┐─,─────── │ │┌ ┐─,───────

└ ┘──,SNABUF=( ───� ┴┬ ┬──FREE ─ ) └ ┘──,BSCBUF=( ───� ┴┬ ┬──FREE ─ ) ├ ┤──LIMIT ├ ┤──LIMIT └ ┘──WARN ─ └ ┘──WARN ─

$D SPOOL - Display the Status of Spool Volumes

��─ ──$D ── ──┬ ┬─SPL─── ──┬ ┬─────────────────── ──── ──┬ ┬─────────────────────────────────── ──────────────� └ ┘─SPOOL─ └ ┘─┤ Identifier ├────(1) └ ┘───┤ Selection limiting keywords ├─

�─ ──┬ ┬───────────────────────────────── ────────────────────────────────────────────────────────────�!└ ┘───┤ Display limiting keywords ├─

Display limiting keywords:├─ ──┬ ┬────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬───────── ────────�

| └ ┘──,ALL └ ┘──,AWAITING └ ┘──,COMMAND └ ┘──,Long └ ┘──,PERCENT └ ┘──,STATUS └ ┘──,SYSAFF

12 OS/390 V2R10 JES2 Commands Summary

Page 23: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬──────────── ──┬ ┬────────────────────────────────────────── ──────────�└ ┘──,TGINUSE └ ┘──,TGNUM └ ┘──,TRKPERTGB └ ┘──,UNITDATA ──┬ ┬───────────────────────────

│ │┌ ┐─,────────────────└ ┘──=( ───� ┴┬ ┬── ──┬ ┬─EXTent─ ── )

│ │└ ┘─M────── ├ ┤──Recmax ──────── ├ ┤──TRKPERCYL ───── └ ┘── ──┬ ┬─TRKrange─ └ ┘─TTrange──

�─ ──┬ ┬───────── ─────────────────────────────────────────────────────────────────────────────────────┤└ ┘──,Volume

Selection limiting keywords:├─ ──┬ ┬───────────────────────────────── ──┬ ┬─────────────────────────────────────── ──────────────────� └ ┘──, ──┬ ┬─── PERCENT ──┬ ┬─ =── percent └ ┘──, ──┬ ┬─── STATUS ──┬ ┬─ =── ──┬ ┬─ACTIVE─── └ ┘─/─ ├ ┤─ ¬=─ └ ┘─/─ └ ┘─ ¬=─ ├ ┤─DRAINING─ ├ ┤─ >── ├ ┤─HALTING── └ ┘─ <── ├ ┤─INACTIVE─ └ ┘─STARTING─

�─ ──┬ ┬────────────────────────────── ──┬ ┬───────────────────────────────── ───────────────────────────�| └ ┘──,| ──┬ ┬─── SYSAFF ──┬ ┬─=── sysaff └ ┘──,| ──┬ ┬─── TGINUSE ──┬ ┬─ =── tginuse| └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─ ¬=─| ├ ┤─>── ├ ┤─ >──| └ ┘─<── └ ┘─ <──

�─ ──┬ ┬───────────────────────────── ──┬ ┬───────────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── TGNUM ──┬ ┬─ =── tgnum └ ┘──, ──┬ ┬─── TRKPERTGB ──┬ ┬─ =── trkpertgb └ ┘─/─ ├ ┤─ ¬=─ └ ┘─/─ ├ ┤─ ¬=─ ├ ┤─ >── ├ ┤─ >── └ ┘─ <── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────────────────────────────────── ───────────────────────────────� │ │┌ ┐─,──────────────────────────────────── └ ┘──, ──┬ ┬─── UNITDATA=( ───� ┴┬ ┬── ──┬ ┬── ──┬ ┬─── EXTent ──┬ ┬─ =── extent ) └ ┘─/─ │ ││ │└ ┘─/─ ├ ┤─ ¬=─ │ │└ ┘── ──┬ ┬─── M ───── ├ ┤─ >── │ │└ ┘─/─ └ ┘─ <── ├ ┤── ──┬ ┬─── Recmax ──┬ ┬─ =── recmax ────── │ │└ ┘─/─ ├ ┤─ ¬=─ │ │├ ┤─ >── │ │└ ┘─ <── └ ┘── ──┬ ┬─── TRKPERCYL ──┬ ┬─ =── trkpercyl └ ┘─/─ ├ ┤─ ¬=─ ├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────── ───────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── Volume ──┬ ┬─ =── volser └ ┘─/─ ├ ┤─ ¬=─ ├ ┤─ >── └ ┘─ <──

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$T DEBUG - Set the JES2 DEBUG Option

��─ ─$T─ ──┬ ┬──DEBUG= ──┬ ┬─Y─ ────────────── ───────────────────────────────────────────────────────────�! │ │└ ┘─N─ └ ┘─DEBUG──┤ DEBUG Options ├────(1)

DEBUG Options:├─ ──┬ ┬──────────────────── ──┬ ┬───────────────── ──┬ ┬───────────────── ──┬ ┬───────────────────── ───────� └ ┘ ─APPLCOPY=─ ──┬ ┬─YES─ └ ┘ ─,CKPT=─ ──┬ ┬─YES─ └ ┘ ─,MISC=─ ──┬ ┬─YES─ └ ┘ ─,SECURITY=─ ──┬ ┬─YES─ └ ┘─NO── └ ┘─NO── └ ┘─NO── └ ┘─NO──

�─ ──┬ ┬──────────────────── ──┬ ┬──────────────────── ──┬ ┬─────────────────── ──┬ ┬───────────────── ──────┤ └ ┘ ─,STORAGE=─ ──┬ ┬─YES─ └ ┘ ─,VERSION=─ ──┬ ┬─YES─ └ ┘ ─,SYMREC=─ ──┬ ┬─YES─ │ │┌ ┐─YES─ └ ┘─NO── └ ┘─NO── └ ┘─NO── └ ┘ ─,BERT=─ ──┴ ┴─NO──

Note:1 You can specify more than one parameter; you must specify at least one parameter.

Chapter 1. JES2 Commands Summary 13

Page 24: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$E CKPTLOCK, HELDBY - Reset the Checkpoint Lock

��─ ──$E ──CKPTLOCK ──┬ ┬────────────────────────────── ────────────────────────────────────────────────�!└ ┘──,HELDBY= ──┬ ┬─memname────────

├ ┤─INITIALIZATION─ └ ┘─INITI──────────

$D, $T CKPTDEF - Display/Control the Checkpoint Definition

��─ ──┬ ┬─$D─ ──CKPTDEF ──┬ ┬────────────────────── ──┬ ┬────────────────────── ───────────────────────────�! └ ┘─$T─ └ ┘─┤ $D ONLY Keywords ├─ └ ┘─┤ $T ONLY Keywords ├─

$D ONLY Keywords:├─ ──┬ ┬─────────── ──┬ ┬───────────────────────────────── ──┬ ┬───────────────────────────────── ─────────�

└ ┘──,APPLCOPY └ ┘──,CKPT1 ──┬ ┬───────────────────── └ ┘──,CKPT2 ──┬ ┬───────────────────── │ │┌ ┐─,────────── │ │┌ ┐─,──────────

└ ┘──=( ───� ┴┬ ┬──DSName ── ) └ ┘──=( ───� ┴┬ ┬──DSName ── ) ├ ┤──INUSE ─── ├ ┤──INUSE ─── ├ ┤──STRname ─ ├ ┤──STRname ─ ├ ┤──VOLATILE ├ ┤──VOLATILE └ ┘──VOLser ── └ ┘──VOLser ──

�─ ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬─────────────────────────────────── ─────────────────────�└ ┘──,DUPLEX └ ┘──,LOGSIZE └ ┘──,MODE └ ┘──,NEWCKPT1 ──┬ ┬────────────────────

│ │┌ ┐─,─────────└ ┘──=( ───� ┴┬ ┬──DSName ─ )

├ ┤──STRname └ ┘──VOLser ─

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬─────────── ──┬ ┬─────────── ─────────────────────────────�└ ┘──,NEWCKPT2 ──┬ ┬──────────────────── └ ┘──,OPVERIFY └ ┘──,RECONFIG

│ │┌ ┐─,─────────└ ┘──=( ───� ┴┬ ┬──DSName ─ )

├ ┤──STRname └ ┘──VOLser ─

�─ ──┬ ┬──────────────────────────────────── ──┬ ┬─────────────────────────────────── ───────────────────┤└ ┘──,VERSIONS ──┬ ┬───────────────────── └ ┘──,VOLATILE ──┬ ┬────────────────────

│ │┌ ┐─,────────── │ │┌ ┐─,─────────└ ┘──=( ───� ┴┬ ┬──MAXFAIL ─ ) └ ┘──=( ───� ┴┬ ┬──ALLCKPT )

├ ┤──MAXUSED ─ └ ┘──ONECKPT ├ ┤──NUMBER ── ├ ┤──NUMFAIL ─ ├ ┤──STATUS ── ├ ┤──VERSFREE

└ ┘ ─ ─WARN ────

$T ONLY Keywords:├─ ──┬ ┬─────────────────── ──┬ ┬───────────────────────────────────── ──────────────────────────────────�

└ ┘──,DUPLEX= ──┬ ┬─OFF─ │ │┌ ┐─,─────────────────└ ┘─ON── └ ┘──,NEWCKPT1=( ───� ┴┬ ┬──DSName=dsname ── )

├ ┤──STRname=strname└ ┘──VOLser=volser ──

�─ ──┬ ┬───────────────────────────────────── ──┬ ┬───────────────────── ──┬ ┬───────────────────── ───────�│ │┌ ┐─,───────────────── └ ┘──,OPVERIFY= ──┬ ┬─No── └ ┘──,RECONFIG= ──┬ ┬─No──└ ┘──,NEWCKPT2=( ───� ┴┬ ┬──DSName=dsname ── ) └ ┘─Yes─ └ ┘─Yes─

├ ┤──STRname=strname└ ┘──VOLser=volser ──

�─ ──┬ ┬─────────────────────────────── ──┬ ┬────────────────────────────────────────── ─────────────────┤ │ │┌ ┐─,─────────── │ │┌ ┐─,──────────────────────

└ ┘──,VERSIONS=( ───� ┴┬ ┬──NUMBER=nn ) └ ┘──,VOLATILE=( ───� ┴┬ ┬──ALLCKPT= ──┬ ┬─DIALOG─ )└ ┘──WARN=mmm ─ │ │├ ┤─IGNORE─

│ │└ ┘─WTOR───└ ┘──ONECKPT= ──┬ ┬─DIALOG─

├ ┤─IGNORE─ └ ┘─WTOR───

14 OS/390 V2R10 JES2 Commands Summary

Page 25: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$D, $T MASDEF - Display and Control the Multi-access Spool Environment

��─ ──┬ ┬─$D─ ──MASDEF ──┬ ┬────────────────────── ──┬ ┬────────────────────── ────────────────────────────�! └ ┘─$T─ └ ┘─┤ $D ONLY Keywords ├─ └ ┘─┤ $T ONLY Keywords ├─

$D ONLY Keywords:├─ ──┬ ┬───────────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬─────── ──────�

└ ┘──, ─── ──AUTOEMEM─ └ ┘──,CKPTLOCK └ ┘──,COLDTIME └ ┘──,COLDVRSN └ ┘──,DORMANCY └ ┘──,HOLD

�─ ──┬ ┬────────── ──┬ ┬──────────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬────────── ──────�└ ┘──,LOCKOUT └ ┘──, ──┬ ┬─OWNMEMB─ └ ┘──,QREBUILD └ ┘──,QUESHELD └ ┘──,RESTART └ ┘──,RSVHELD

└ ┘─OWNSID──

�─ ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬─────────── ──────────────────────────┤└ ┘──,SHARED └ ┘──,SYNCTOL └ ┘──,WARMTIME └ ┘──,XCFGRPNM └ ┘─┤ L= ├────(1)

$T ONLY Keywords:├─ ──┬ ┬─────────────────────────── ──┬ ┬───────────────────────────────────────── ──────────────────────�

└ ┘──, ──┬ ┬─AUTOEMEM─ = ──┬ ┬─OFF─ └ ┘──,DORMANCY= ──┬ ┬──mmmm ─────────────────── └ ┘─AUTOESYS─ └ ┘─ON── └ ┘──( ──┬ ┬────── ──┬ ┬─────── )

└ ┘──mmmm └ ┘──,nnnn

�─ ──┬ ┬──────────────── ──┬ ┬──────────────── ──┬ ┬──────────────────── ──┬ ┬─────────────────────── ───────�└ ┘──,HOLD=nnnnnnnn └ ┘──,LOCKOUT=nnnnn └ ┘──,RESTART= ──┬ ┬─No── └ ┘──,SHARED= ──┬ ┬─CHECK───

└ ┘─Yes─ └ ┘─NOCHECK─

�─ ──┬ ┬────────────── ────────────────────────────────────────────────────────────────────────────────┤└ ┘──,SYNCTOL=nnn

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$ADD, $DEL, $D, $T CONNECT

��─ ──┬ ┬─$ADD─ ──CONNect ──┬ ┬───────────────────────────────────── ─────────────────────────────────────� ├ ┤─$DEL─ └ ┘──, ──┬ ┬── ──┬ ┬─── MA ───── ─── ──=─ membera

├ ┤─$D─── │ │└ ┘─/─└ ┘─$T─── ├ ┤── ──┬ ┬─── MEMBA ──

│ │└ ┘─/─ └ ┘── ──┬ ┬─── MEMBERA └ ┘─/─

�─ ──┬ ┬───────────────────────────────────── ──┬ ┬────────────────────────────────── ───────────────────� └ ┘──, ──┬ ┬── ──┬ ┬─── MB ───── ─── ──=─ memberb └ ┘──, ──┬ ┬── ──┬ ┬─── NA ─── ─── ── =─ nodea │ │└ ┘─/─ │ │└ ┘─/─ ├ ┤── ──┬ ┬─── MEMBB ── └ ┘── ──┬ ┬─── NODEA │ │└ ┘─/─ └ ┘─/─ └ ┘── ──┬ ┬─── MEMBERB └ ┘─/─

�─ ──┬ ┬────────────────────────────────── ──┬ ┬─────────────────────────────── ─────────────────────────�└ ┘──, ──┬ ┬── ──┬ ┬─── NB ─── ─── ── =─ nodeb └ ┘─┤ $ADD and $T Only Keywords ├─

│ │└ ┘─/─ └ ┘── ──┬ ┬─── NODEB └ ┘─/─

�─ ──┬ ┬─────────────────────────────────────── ──┬ ┬───────────────────────────────────────── ─────────�!└ ┘─┤ $D Only Display Limiting Keywords ├─ └ ┘─┤ $D Only Selection Limiting Keywords ├─

$ADD and $T Only Keywords:├─ ──┬ ┬─────────────────────── ──┬ ┬───────────── ──────────────────────────────────────────────────────┤

└ ┘──,PATHMGR = ──┬ ┬─No──── └ ┘──,REST =rest ├ ┤─RESET─ └ ┘─Yes───

$D Only Display Limiting Keywords:├─ ──┬ ┬────── ──┬ ┬────────────────────── ──┬ ┬────────────────────── ──┬ ┬──────────────────── ────────────� └ ┘ ─,CES─ └ ┘──, ─── ─── ──┬ ┬─MA────── └ ┘──, ─── ─── ──┬ ┬─MB────── └ ┘──, ─── ─── ──┬ ┬─NA──── ├ ┤─MEMBA─── ├ ┤─MEMBB─── └ ┘─NODEA─ └ ┘─MEMBERA─ └ ┘─MEMBERB─

�─ ──┬ ┬──────────────────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬──────── ──┬ ┬───────── ──────────� └ ┘──, ─── ─── ──┬ ┬─NB──── └ ┘ ─,PATHMGR─ └ ┘ ─,PRIVATE─ └ ┘ ─,REST─ └ ┘ ─,STATE─ └ ┘ ─,STATIC─ └ ┘─NODEB─

�─ ──┬ ┬───────── ──┬ ┬─────── ──────────────────────────────────────────────────────────────────────────┤ └ ┘ ─,STATUS─ └ ┘ ─,TIME─

Chapter 1. JES2 Commands Summary 15

Page 26: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$D Only Selection Limiting Keywords:├─ ──┬ ┬───────────────────────────────────── ──┬ ┬─────────────────────────────────── ──────────────────� └ ┘──, ──┬ ┬─── PATHMGR ──┬ ┬─ =── ──┬ ┬─No──── └ ┘──, ──┬ ┬─── PRIVATE ──┬ ┬─ =── ──┬ ┬─No── └ ┘─/─ └ ┘─ ¬=─ ├ ┤─RESET─ └ ┘─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘─Yes───

�─ ──┬ ┬─────────────────────────── ──┬ ┬───────────────────────────────────────── ──────────────────────� └ ┘──, ──┬ ┬─── REST ──┬ ┬─ =── rest └ ┘──, ──┬ ┬─── STATE ──┬ ┬─ =── ──┬ ┬─ R────────── └ ┘─/─ ├ ┤─ ¬=─ └ ┘─/─ └ ┘─ ¬=─ ├ ┤─EXTRA─────── ├ ┤─>─── ├ ┤─INUSE─────── └ ┘─<─── ├ ┤─PENDING───── ├ ┤─RESTMAX───── └ ┘─UNCONNECTED─

�─ ──┬ ┬────────────────────────────────── ──┬ ┬─────────────────────────────────────── ─────────────────┤ └ ┘──, ──┬ ┬─── STATIC ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── STATUS ──┬ ┬─ =── ──┬ ┬─ACTIVE─── └ ┘─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘─/─ └ ┘─ ¬=─ ├ ┤─HELD───── └ ┘─INACTIVE─

$D R(n).CON

��─ ─$D─ ── ─R──┤ Numeric ├────(1) ─.CON─ ──┬ ┬──────────────── ─────────────────────────────────────────────�! └ ┘──, ──┬ ┬─── STATUS └ ┘─/─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$ADD, $D, $DEL, $T DESTID

��─ ──┬ ┬──┬ ┬─$ADD─ ─┤ Common ├──┤ Destination ├────(1) ──┬ ┬──────────────── ────────────────────────── ────�!│ │└ ┘─$DEL─ └ ┘─┤ PRIMARY ├────(2)

├ ┤─$D──┤ Common ├─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────────────────────────────│ │└ ┘─┤ Display Limiting Keywords ├─ └ ┘─┤ Selection Limiting Keywords ├─

└ ┘─$T──┤ Common ├─ ──┬ ┬─────────────────────────── ──┬ ┬───────────── ────────────────────────└ ┘─┤ Modification Keywords ├─ └ ┘─┤ PRIMARY ├─

Common:├─ ─DESTid──┤ Value ├────(1) ────────────────────────────────────────────────────────────────────────────┤

Display Limiting Keywords:├─ ──┬ ┬─────── ──┬ ┬────────── ──┬ ┬───────── ────────────────────────────────────────────────────────────┤ └ ┘─,DEST─ └ ┘─,PRIMARY─ └ ┘─,STATUS─

Selection Limiting Keywords:├─ ──┬ ┬──────────────────────────────────────────────── ──┬ ┬───────────── ─────────────────────────────┤ └ ┘ ─,─ ──┬ ┬─── ─STATUS─ ──┬ ┬─ =── ──┬ ┬─DESTID────────── └ ┘─┤ PRIMARY ├─ └ ┘─/─ └ ┘─ ê=─ ├ ┤─NODENAME──────── └ ┘─NODENAME+DESTID─

Modification Keywords:├─ ──┬ ┬──────────────────── ──┬ ┬────────────────────── ────────────────────────────────────────────────┤

└ ┘──,PRIMARY= ──┬ ┬─No── └ ┘──,DEST= ──┬ ┬─nodename─ └ ┘─Yes─ └ ┘─Nnnnn────

PRIMARY:├─ ──┬ ┬─────────────────────────── ───────────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── PRIMARY= ──┬ ┬─No── └ ┘─/─ └ ┘─Yes─

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 $ADD only.

16 OS/390 V2R10 JES2 Commands Summary

Page 27: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$D ACTRMT

��─ ──$D ──ACTRMT ──┬ ┬──────────────── ──┬ ┬──────────── ──┬ ┬───────────────────────────────────────── ───�!└ ┘─┤ Numeric ├────(1) └ ┘──,MEMBER───(2) └ ┘──, ──┬ ┬─── MEMBER───(3) ──┬ ┬─ =── ──┬ ┬─memnum──

└ ┘─/─ └ ┘─ ê=─ └ ┘─memname─

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 Display Limiting Keyword3 Selection Limiting Keyword

$D U - Display the Status of JES2-Controlled Devices

��─ ─$D─ ─U─ ──┬ ┬──────────────────────── ──┬ ┬────────── ───────────────────────────────────────────────�! │ │┌ ┐─.────────────────── ├ ┤─,ACTIVE── └ ┘ ───� ┴┬ ┬─,ALL───────────── ├ ┤─,ACT───── ├ ┤──,LINEn ────────── ├ ┤─,LONG────

├ ┤──,LNEn ─────────── ├ ┤─,SHORT─── ├ ┤─,LNES──────────── ├ ┤─,SH────── ├ ┤──,LOGONn ───────── ├ ┤─,STARTED─ ├ ┤──,LGNn ─────────── └ ┘─,STAR──── ├ ┤─,LGNS──────────── ├ ┤─,OFFS──────────── ├ ┤─,PRTS──────────── ├ ┤─,PUNS──────────── ├ ┤─,RMT───────────── ├ ┤─,RMTS────────────

├ ┤──,RMTn( ──┬ ┬─ -n─ ) │ │└ ┘─ -�─ ├ ┤─,RDRS──────────── ├ ┤─,TP────────────── └ ┘─,device──────────

$ADD, $E, $P, $S, $T LINE

��─ ──┬ ┬─$ADD─ ── ──┬ ┬─LINE─ ─┤ Numeric ├────(1) ──┬ ┬─────────────────────────────────────── ────────────────�├ ┤─$E─── └ ┘─LNE── └ ┘─┤ $ADD and $T Modification Keywords ├─

├ ┤─$P─── ├ ┤─$S─── └ ┘─$T───

�─ ──┬ ┬───────────────────────────────────────── ──┬ ┬─────────────────────────────────── ─────────────�!└ ┘─┤ $T Only Selection Limiting Keywords ├─ └ ┘─┤ $T Only Modification Keywords ├─

$ADD and $T Modification Keywords:├─ ──┬ ┬───────────────────── ──┬ ┬─────────────── ──┬ ┬───────────────────── ──┬ ┬──────────────────── ─────�

└ ┘──,AUTODISC= ──┬ ┬─No── └ ┘──,CODE= ──┬ ┬─A─ └ ┘──,COMPRESS= ──┬ ┬─No── └ ┘──,DUPLEX= ──┬ ┬─FULL─ └ ┘─Yes─ └ ┘─B─ └ ┘─Yes─ └ ┘─HALF─

�─ ──┬ ┬─────────────────── ──┬ ┬───────────────────────── ──┬ ┬──────────────── ──────────────────────────�└ ┘──,INTERFAC= ──┬ ┬─A─ └ ┘──,LINECCHR= ──┬ ┬─EBCDIC── └ ┘──,LOG= ──┬ ┬─No──

└ ┘─B─ └ ┘─USASCII─ └ ┘─Yes─

�─ ──┬ ┬──────────────────── ──┬ ┬──────────── ──┬ ┬─────────────────── ──┬ ┬──────────────────── ───────────�└ ┘──,Password=password └ ┘──,REST=rest └ ┘──,SPEED= ──┬ ┬─HIGH─ └ ┘──,TRaceio= ──┬ ┬─No──

└ ┘─LOW── └ ┘─Yes─

�─ ──┬ ┬───────────────────── ──┬ ┬───────────────────── ────────────────────────────────────────────────┤└ ┘──,TRANSPAR= ──┬ ┬─No── └ ┘──,UNIT= ──┬ ┬─SNA─────

└ ┘─Yes─ ├ ┤─devnum── └ ┘─/devnum─

$T Only Selection Limiting Keywords:├─ ──┬ ┬──────────────────────────────────── ──┬ ┬────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── AUTODISC ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── CODE ──┬ ┬─ =── ──┬ ┬─A─ └ ┘ ─/─ └ ┘─ ê=─ └ ┘─Yes─ └ ┘─/─ └ ┘─ ê=─ └ ┘─B─

Chapter 1. JES2 Commands Summary 17

Page 28: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬──────────────────────────────────────── ───────────────� └ ┘──, ──┬ ┬─── COMPRESS ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ──┬ ┬─── Discon ──┬ ┬─ =── ──┬ ┬─I───────── └ ┘ ─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─ ê=─ ├ ┤─INTERRUPT─ ├ ┤─No──────── ├ ┤─Q───────── └ ┘─QUIESCE───

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬────────────────────────────────── ─────────────────────� └ ┘──, ──┬ ┬─── DUPLEX ──┬ ┬─ =── ──┬ ┬─FULL─ └ ┘──, ──┬ ┬─── INTERFAC ──┬ ┬─ =── ──┬ ┬─A─ └ ┘ ─/─ └ ┘─ ê=─ └ ┘─HALF─ └ ┘─/─ └ ┘─ ê=─ └ ┘─B─

�─ ──┬ ┬──────────────────────────────────────── ──┬ ┬────────────────────────────── ────────────────────� └ ┘──, ──┬ ┬─── LINECCHR ──┬ ┬─ =── ──┬ ┬─EBCDIC── └ ┘──, ──┬ ┬─── LOG ──┬ ┬─=── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ê=─ └ ┘─USASCII─ └ ┘ ─/─ └ ┘─ê=─ └ ┘─Yes─

�─ ──┬ ┬─────────────────────────── ──┬ ┬────────────────────────────────── ─────────────────────────────� └ ┘──, ──┬ ┬─── REST ──┬ ┬─ =── nnnn └ ┘──, ──┬ ┬─── SPEED ──┬ ┬─ =── ──┬ ┬─HIGH─ └ ┘ ─/─ ├ ┤─ ê=─ └ ┘ ─/─ └ ┘─ ê=─ └ ┘─LOW── ├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬──────────────────────────────────── ───────────────────� └ ┘──, ──┬ ┬─── TRaceio ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── TRANSPAR ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ê=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─ ê=─ └ ┘─Yes─

�─ ──┬ ┬──────────────────────────────────── ──────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── UNIT ──┬ ┬─ =── ──┬ ┬─SNA───── └ ┘ ─/─ ├ ┤─ ê=─ ├ ┤─devnum── ├ ┤─ >── └ ┘─/devnum─ └ ┘─ <──

$T Only Modification Keywords:├─ ──┬ ┬──────────────────────────────────────── ──────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── Discon ──┬ ┬─ =── ──┬ ┬─I───────── └ ┘ ─/─ └ ┘─ ê=─ ├ ┤─INTERRUPT─ ├ ┤─No──────── ├ ┤─Q───────── └ ┘─QUIESCE───

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$T, $D JOBCLASS(n)

��─ ──┬ ┬─$T─ ──JOBCLASS ─── ──┤ Value ├────(1) ──┬ ┬───────────────────────────────────────── ────────────────� └ ┘─$D─ └ ┘───┤ $D Only Display limiting keywords ├─

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────────────── ─────────────────�!└ ┘───┤ Selection Limiting Keywords ├─ └ ┘───┤ $T Only Modification keywords ├─

$T Only Modification keywords:├─ ──┬ ┬───────────────── ──┬ ┬───────────────────────────────── ──┬ ┬──────────────── ────────────────────�

└ ┘──,ACCT= ──┬ ┬─No── └ ┘──,AUTH= ──┬ ┬──┬ ┬─ALL── ─────────── └ ┘──,BLP= ──┬ ┬─No── └ ┘─Yes─ │ │├ ┤─CONS─ └ ┘─Yes─ │ │├ ┤─INFO─ │ │├ ┤─IO─── │ │└ ┘─SYS── │ │┌ ┐─,──────── └ ┘──( ───(2) ───� ┴──┬ ┬─ALL── ) ├ ┤─CONS─ ├ ┤─INFO─ ├ ┤─IO─── └ ┘─SYS──

�─ ──┬ ┬──────────────────────── ──┬ ┬───────────────────── ──┬ ┬───────────────── ──┬ ┬───────────────── ───�└ ┘──,COMMAND= ──┬ ┬─DISPLAY─ └ ┘──,CONDPURG= ──┬ ┬─No── └ ┘──,COPY= ──┬ ┬─No── └ ┘──,HOLD= ──┬ ┬─No──

├ ┤─EXECUTE─ └ ┘─Yes─ └ ┘─Yes─ └ ┘─Yes─ ├ ┤─IGNORE── └ ┘─VERIFY──

�─ ──┬ ┬─────────────────── ──┬ ┬─────────────────── ──┬ ┬──────────────────── ──┬ ┬──────────────── ────────�└ ┘──,IEFUJP= ──┬ ┬─No── └ ┘──,IEFUSO= ──┬ ┬─No── └ ┘──,JOURNAL= ──┬ ┬─No── └ ┘──,LOG= ──┬ ┬─No──

└ ┘─Yes─ └ ┘─Yes─ └ ┘─Yes─ └ ┘─Yes─

�─ ──┬ ┬───────────────── ──┬ ┬──────────────────── ─────────────────────────────────────────────────────�└ ┘──,MODE= ──┬ ┬─JES─ └ ┘──,MSGCLASS=msgclass

└ ┘─WLM─

18 OS/390 V2R10 JES2 Commands Summary

Page 29: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬─────────────────────────────────────────────────── ───────────────────────────────────────────�└ ┘──,MSGLEVEL= ──┬ ┬──statements ───────────────────────

└ ┘──( ──┬ ┬──────────── ──┬ ┬─────────── )└ ┘──statements └ ┘──,messages

�─ ──┬ ┬──────────────────────────────────────────────────────────────────────── ──────────────────────�└ ┘──,OUTDisp= ──┬ ┬─┤ OUTdisp List ├────────────────────────────────────────

└ ┘──( ──┬ ┬────────────────── ──┬ ┬─────────────────────────── )└ ┘─┤ OUTdisp List ├─ └ ┘── ──┬ ┬─────────────────────

└ ┘─,──┤ OUTdisp List ├─

�─ ──┬ ┬─────────────────── ──┬ ┬────────────────── ──┬ ┬───────────────────── ──┬ ┬────────────────── ──────�└ ┘──,OUTPUT= ──┬ ┬─No── └ ┘──,PERFORM=perform └ ┘──,PGMRNAME= ──┬ ┬─No── └ ┘──,PROCLIB=proclib

└ ┘─Yes─ └ ┘─Yes─

�─ ──┬ ┬────────────────── ──┬ ┬──────────────── ────────────────────────────────────────────────────────┤└ ┘──,QHELD= ──┬ ┬─No── └ ┘──,SCHENV=schenv

└ ┘─Yes─

OUTdisp List:├─ ──┬ ┬─H───── ───────────────────────────────────────────────────────────────────────────────────────┤ ├ ┤─HOLD── ├ ┤─K───── ├ ┤─KEEP── ├ ┤─L───── ├ ┤─LEAVE─ ├ ┤─P───── ├ ┤─PURGE─ ├ ┤─W───── └ ┘─WRITE─

$D Only Display limiting keywords:├─ ──┬ ┬─────── ──┬ ┬─────── ──┬ ┬────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬─────── ──┬ ┬─────── ───────────────�

└ ┘──,ACCT └ ┘──,AUTH └ ┘──,BLP └ ┘──,COMMAND └ ┘──,CONDPURG └ ┘──,COPY └ ┘──,HOLD

�─ ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬────── ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬─────────── ───────�└ ┘──,IEFUJP └ ┘──,IEFUSO └ ┘──,JOURNAL └ ┘──,LOG └ ┘──,MODE └ ┘──,MSGCLASS └ ┘──,MSGLEVEL

�─ ──┬ ┬─────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬──────── ─────�└ ┘──,NAME └ ┘──,OUTDisp └ ┘──,OUTPUT └ ┘──,PERFORM └ ┘──,PGMRNAME └ ┘──,PROCLIB └ ┘──,QHELD

�─ ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬────── ──┬ ┬─────── ──┬ ┬───────── ──┬ ┬──────── ──┬ ┬────── ────�└ ┘──,REGION └ ┘──,RESTART └ ┘──,SCAN └ ┘──,SWA └ ┘──,TIME └ ┘──,TYPE26 └ ┘──,TYPE6 └ ┘──,XBM

�─ ──┬ ┬─────────────────────────────────── ───────────────────────────────────────────────────────────┤└ ┘──,XEQCount ──┬ ┬────────────────────

│ │┌ ┐─,─────────└ ┘──=( ───� ┴┬ ┬──CURrent )

└ ┘──MAXimum

Selection limiting keywords:├─ ──┬ ┬──────────────────────────────── ──┬ ┬─────────────────────────────── ───────────────────────────� └ ┘──, ──┬ ┬─── ACCT ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── BLP ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─

�─ ──┬ ┬──────────────────────────────────── ──┬ ┬──────────────────────────────── ──────────────────────� └ ┘──, ──┬ ┬─────── COPY ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── HOLD ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ──┬ ┬─── └ ┘─ ¬=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘─/─

�─ ──┬ ┬────────────────────────────────── ──┬ ┬───────────────────────────────── ───────────────────────� └ ┘──, ──┬ ┬─── IEFUJP ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── IEFUSO ──┬ ┬─=── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─¬=─ └ ┘─Yes─

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬─────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── JOURNAL ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── LOG ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─

�─ ──┬ ┬──────────────────────────────── ──┬ ┬──────────────────────────────────── ──────────────────────� └ ┘──, ──┬ ┬─── MODE ──┬ ┬─ =── ──┬ ┬─JES─ └ ┘──, ──┬ ┬─── MSGLEVEL ──┬ ┬─ =── statement └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─WLM─ └ ┘ ─/─ └ ┘─ ¬=─

�─ ──┬ ┬─────────────────────── ──┬ ┬────────────────────────────────── ─────────────────────────────────� └ ┘──, ─/─NAME ──┬ ┬─ =── name └ ┘──, ──┬ ┬─── OUTPUT ──┬ ┬─ =── ──┬ ┬─No── ├ ┤─ ¬=─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ ├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬───────────────────────────────── ──┬ ┬──────────────────────────────────── ─────────────────────� └ ┘──, ──┬ ┬─── PERFORM ──┬ ┬─ =── perform └ ┘──, ──┬ ┬─── PGMRNAME ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ ├ ┤─ ¬=─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ ├ ┤─ >── └ ┘─ <──

Chapter 1. JES2 Commands Summary 19

Page 30: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬───────────────────────────────── ──┬ ┬───────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── PROCLIB ──┬ ┬─ =── proclib └ ┘──, ──┬ ┬─── QHELD ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ ├ ┤─ ¬=─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ ├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬──────────────────────────────── ───────────────────────� └ ┘──, ──┬ ┬─── RESTART ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── SCAN ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─

�─ ──┬ ┬────────────────────────────── ──┬ ┬───────────────────────────────────── ───────────────────────� └ ┘──, ──┬ ┬─── SCHENV ──┬ ┬─=── schenv └ ┘──, ──┬ ┬─────── SWA ──┬ ┬─ =── ──┬ ┬─ABOVE─ └ ┘─/─ ├ ┤─¬=─ └ ┘ ──┬ ┬─── └ ┘─ ¬=─ └ ┘─BELOW─ ├ ┤─>── └ ┘─/─ └ ┘─<──

�─ ──┬ ┬────────────────────────────── ──┬ ┬────────────────────────────────── ──────────────────────────� └ ┘──, ──┬ ┬─── TIME ──┬ ┬─ =── ─── ──)─ └ ┘──, ──┬ ┬─── TYPE26 ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ¬=─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─

�─ ──┬ ┬───────────────────────────────── ──┬ ┬───────────────────────── ────────────────────────────────� └ ┘──, ──┬ ┬─── TYPE6 ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── XBM ──┬ ┬─ =── xbm └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘─/─ ├ ┤─ ¬=─ ├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────────────────────────────── ───────────────────────────────────┤ │ │┌ ┐─,──────────────────────────────── └ ┘──, ─── ──/─ XEQCount=( ───� ┴┬ ┬── ─/─CURrent ──┬ ┬─ =── current ──── ) │ │├ ┤─ ¬=─ │ │├ ┤─ >── │ │└ ┘─ <── └ ┘── ──┬ ┬─── MAXimum ──┬ ┬─ =── maximum └ ┘ ─/─ ├ ┤─ ¬=─ ├ ┤─ >── └ ┘─ <──

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6. (Optional for $D.)2 auth can be coded up to 4 times.

$T, $D JOBDEF

��─ ──┬ ┬─$T─ ──JOBDEF ──┬ ┬────────────────────── ──┬ ┬────────────────────── ────────────────────────────�! └ ┘─$D─ └ ┘─┤ $D ONLY Keywords ├─ └ ┘─┤ $T ONLY Keywords ├─

$D ONLY Keywords:├─ ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬───────── ──┬ ┬─────────── ──┬ ┬───────── ─────────────�

└ ┘──,ACCTFLD └ ┘──,CNVT_ENQ └ ┘──,DUPL_JOB └ ┘──,JCLERR └ ┘──,JNUMWARN └ ┘──,JOBNUM

�─ ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬───────────── ──┬ ┬─────────── ────────�└ ┘──,JOBWARN └ ┘──,PRTYHIGH └ ┘──,PRTYJECL └ ┘──,PRTYJOB └ ┘──,PRTYLOW=nn └ ┘──,PRTYRATE

�─ ──┬ ┬──────── ──┬ ┬────────── ────────────────────────────────────────────────────────────────────────┤└ ┘──,RANGE └ ┘──,RASSIGN

$T Only Keywords:├─ ──┬ ┬───────────────────────── ──┬ ┬────────────────────── ──┬ ┬───────────────────────── ──────────────�

└ ┘──,ACCTFLD= ──┬ ┬─IGNORE─── └ ┘──,CNVT_ENQ= ──┬ ┬─WAIT─ └ ┘──,DUPL_JOB= ──┬ ┬─DELAY─── ├ ┤─OPTIONAL─ └ ┘─FAIL─ └ ┘─NODELAY─ └ ┘─REQUIRED─

�─ ──┬ ┬─────────────────── ──┬ ┬──────────────── ──┬ ┬─────────────── ──┬ ┬─────────────── ─────────────────�└ ┘──,JCLERR= ──┬ ┬─No── └ ┘──,JNUMWARN =nnn └ ┘──,JOBNUM=nnnnn └ ┘──,JOBWARN =nnn

└ ┘─Yes─

�─ ──┬ ┬─────────────── ──┬ ┬────────────────────── ──┬ ┬───────────────────── ──┬ ┬─────────────── ─────────�└ ┘──,PRTYHIGH =nn └ ┘──,PRTYJECL = ──┬ ┬─No── └ ┘──,PRTYJOB = ──┬ ┬─No── └ ┘──,PRTYLOW = nn

└ ┘─Yes─ └ ┘─Yes─

�─ ──┬ ┬────────────────── ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────── ────────────┤└ ┘──,PRTYRATE = nnnn └ ┘──,RANGE = ──┬ ┬── nnnnn ───────────── └ ┘──,RASSIGN = ──┬ ┬─No──

└ ┘──( nnnnn ──┬ ┬──────── ) └ ┘─Yes─└ ┘──,mmmmm

20 OS/390 V2R10 JES2 Commands Summary

Page 31: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$ADD, $T, $D FSS

��─ ──┬ ┬─$ADD─ ── ──┬ ┬─FSS──── ─┤ Value ├────(1) ──┬ ┬─────────────────────────────────────── ────────────────� ├ ┤─$T─── └ ┘─FSSDef─ └ ┘─┤ $ADD and $T Modification Keywords ├─ └ ┘─$D───

�─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────────────────────────────────── ────────────────────� └ ┘─┤ $T and $D COMMON Keywords ├─ └ ┘─┤ $D Only Display Limiting Keywords ├─

�─ ──┬ ┬───────────────────────────────────────── ────────────────────────────────────────────────────�! └ ┘─┤ $D Only Selection Limiting Keywords ├─

$ADD and $T Modification Keywords:├─ ──┬ ┬────────────────────── ──┬ ┬─────────────────────────── ──┬ ┬───────────────── ────────────────────┤

└ ┘──,AUTOstop = ──┬ ┬─No── └ ┘──,HASPFSSM = ──┬ ┬─HASPFSSM─ └ ┘──,PROC =accccccc └ ┘─Yes─ └ ┘─accccccc─

$T and $D COMMON Keywords:├─ ──┬ ┬───────────────────────────── ──┬ ┬─────────────────────────────── ──────────────────────────────�

└ ┘──,AUTOstop ──┬ ┬─ =── ──┬ ┬─No── └ ┘──,/HASPFSSM ──┬ ┬─ =── ─accccccc─ └ ┘─ ê=─ └ ┘─Yes─ ├ ┤─ ê=─ ├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬───────────────────────── ─────────────────────────────────────────────────────────────────────┤└ ┘──,/PROC ──┬ ┬─ =── accccccc

├ ┤─ ê=─ ├ ┤─ >── └ ┘─ <──

$D Only Display Limiting Keywords:├─ ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────── ─────────────�

| └ ┘──,ASID └ ┘──,AUTOstop └ ┘──,FSSMADDR └ ┘──,FSSMAPAR └ ┘──,FSSMLENG └ ┘──,FSSMPTF

�─ ──┬ ┬─────────── ──┬ ┬─────── ──┬ ┬─────── ─────────────────────────────────────────────────────────────┤| └ ┘──,HASPFSSM └ ┘──,LONG └ ┘──,PROC

$D ONLY Selection Limiting Keywords:├─ ──┬ ┬─────────────────────────── ───────────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── ASID ──┬ ┬─ =── asid └ ┘─/─ ├ ┤─ ê=─ ├ ┤─ >── └ ┘─ <──

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).

$D, $T, SSI

��─ ──┬ ┬─$D─ ── ─SSI──┤ Numeric ├────(1) ──┬ ┬───────────────────────────────── ─────────────────────────────� └ ┘─$T─ └ ┘─┤ Selection Limiting Keywords ├─

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬─────────────────────────────────────── ───────────────�! └ ┘─┤ $T Only Modification Keywords ├─ └ ┘─┤ $D Only Display Limiting Keywords ├─

Selection Limiting Keywords:├─ ──┬ ┬───────────────────────────────── ─────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── TRace ──┬ ┬─ =── ──┬ ┬─No── └ ┘─/─ └ ┘─ ê=─ └ ┘─Yes─

$T Only Modification Keywords:├─ ──┬ ┬─────────────────── ───────────────────────────────────────────────────────────────────────────┤

└ ┘──,TRace = ──┬ ┬─No── └ ┘─Yes─

$D Only Display Limiting Keywords:├─ ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬───────── ──┬ ┬──────── ────────────────────────────────────────────────┤ └ ┘ ─,ADDRess─ └ ┘ ─,DESC─ └ ┘ ─,MODULE─ └ ┘ ─,TRace─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).

Chapter 1. JES2 Commands Summary 21

Page 32: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$ADD, $E, $T, $S, $P LOGON(n)

��─ ──┬ ┬─$ADD─ ── ──┬ ┬─LGN─── ─┤ Numeric ├────(1) ──┬ ┬───────────────────────────────────────── ─────────────� ├ ┤─$T─── └ ┘─LOGON─ └ ┘─┤ $T Only Selection Limiting Keywords ├─ ├ ┤─$E─── ├ ┤─$S─── └ ┘─$P───

�─ ──┬ ┬───────────────────────────────────────────── ────────────────────────────────────────────────�! └ ┘─┤ $ ADD and $T Only Modification Keywords ├─

$T Only Selection Limiting Keywords:├─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────────────────────────── ────────────────────────────� └ ┘──, ──┬ ┬─── Applid ──┬ ┬─ =── applid └ ┘──, ──┬ ┬─── LOG ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ ├ ┤─ ê=─ └ ┘ ─/─ └ ┘─ ê=─ └ ┘─Yes─ ├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────── ───────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── TRaceio ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ê=─ └ ┘─Yes─

$ADD and $ T Only Modification Keywords:├─ ──┬ ┬───────────────── ──┬ ┬───────────────── ──┬ ┬──────────────────── ──┬ ┬───────────────────── ───────┤

└ ┘──,Applid =applid └ ┘──,LOG = ──┬ ┬─No── └ ┘──,Password=password └ ┘──,TRaceio = ──┬ ┬─No── └ ┘─Yes─ └ ┘─Yes─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$ADD, $D, $T Printer (PRINTERnnnn, PRTnnnn, Rnnnn.PRnnnn)

��─ ──┬ ┬─$T─ ──┬ ┬─PRINTER─ ─┤ Numeric ├────(1) ───────────────────────── ───────────────────────────────────� │ │└ ┘─PRT───── ├ ┤ ─$T──R──┤ Numeric ├────(1) ─.PR──┤ Numeric ├────(1) ────────────── ├ ┤──┬ ┬ ─$D─ ──┬ ┬─PRINTER─ ──┬ ┬──────────────── ──┬ ┬─────────── ── │ ││ │└ ┘─PRT───── └ ┘─┤ Numeric ├────(1) └ ┘─┤ L= ├────(1)

│ │└ ┘ ─$D─ ─R─ ──┬ ┬──────────────── ──┬ ┬───────────────────── │ │└ ┘─┤ Numeric ├────(1) └ ┘ ─.PR──┤ Numeric ├────(1)

└ ┘ ─$ADD─ ──┬ ┬─PRINTER─ ─┤ Numeric ├────(1) ──┬ ┬───────────────────└ ┘─PRT───── └ ┘─┤ $ADD Keywords ├─

�─ ──┬ ┬─────────────────────────────────────────── ──┬ ┬──────────────────────────────────────── ───────�└ ┘───┤ $D COMMON Display limiting keywords ├─ └ ┘───┤ $D PRT Display limiting keywords ├─

�─ ──┬ ┬───────────────────────────────────────────── ──┬ ┬─────────────────────────────────── ──────────�└ ┘───┤ $D Rnnn.PRm Display limiting keywords ├─ └ ┘───┤ Selection limiting keywords ├─

�─ ──┬ ┬──────────────────────────────── ─────────────────────────────────────────────────────────────�!└ ┘───┤ $T Modification keywords ├─

$D COMMON Display limiting keywords:├─ ──┬ ┬─────── ──┬ ┬──────── ──┬ ┬────────────────────────────── ──┬ ┬─────────── ──┬ ┬─────────── ───────────�

| └ ┘──,ASID └ ┘──,Burst └ ┘──, ──┬ ┬─CHAR─ ──┬ ┬───────────── └ ┘──,CKPTLINE └ ┘──,CKPTPAGE└ ┘─X──── └ ┘─┤ numeric ├─

�─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬──────────── ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬─────────── ──────────────�| └ ┘──,CReator └ ┘──,DEVFCB └ ┘──, ──┬ ┬─C─── └ ┘──,Forms └ ┘──,FSSINFO └ ┘──,FSSMADDR

└ ┘─FCB─

�─ ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬──────── ────────────�| └ ┘──,FSSMAPAR └ ┘──,FSSMLENG └ ┘──,FSSMAPTF └ ┘──,HASPFSSM └ ┘──,JOBname └ ┘──,LIMit

�─ ──┬ ┬─────── ──┬ ┬─────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬─────── ──┬ ┬────────────── ──┬ ┬──────── ────────�| └ ┘──,LONG └ ┘──,NAME └ ┘──,NEWPAGE └ ┘──,PRMode └ ┘──,PROC └ ┘──, ──┬ ┬─CLass─ └ ┘──,RANGE

└ ┘─Queue─

�─ ──┬ ┬─────────── ──┬ ┬────── ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬────────────── ──┬ ┬───────── ──┬ ┬──────── ──────�└ ┘──,Routecde └ ┘──,Sep └ ┘──,SEPDS └ ┘──,SETUP └ ┘──, ──┬ ┬─K───── └ ┘──,STATUS └ ┘──,TRace

└ ┘─SPACE─

�─ ──┬ ┬──────── ──┬ ┬──────────── ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬───── ───────────────────────────────────┤└ ┘──,TRANS └ ┘──, ──┬ ┬─T─── └ ┘──,Volume └ ┘──,Writer └ ┘──,WS

└ ┘─UCS─

$D PRT Display limiting keywords:

22 OS/390 V2R10 JES2 Commands Summary

Page 33: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────────── ──────�└ ┘──,CKPTMODE └ ┘──,CKPTPAGE └ ┘──,CKPTSEC └ ┘──,COPYMARK └ ┘──,DEVFLASH └ ┘──, ──┬ ┬─FLASH─

└ ┘─O─────

�─ ──┬ ┬────── ──┬ ┬─────────── ──┬ ┬─────── ──┬ ┬─────── ──┬ ┬─────────────── ──┬ ┬─────── ──┬ ┬──────── ─────────�└ ┘──,FSS └ ┘──,LASTFORM └ ┘──,Mark └ ┘──,MODE └ ┘──, ──┬ ┬─MODIFY─ └ ┘──,NPRO └ ┘──,Pause

└ ┘─Y──────

�─ ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬─────── ─────────────────┤└ ┘──,PLIM └ ┘──,PRESELCT └ ┘──,SEPCHARS └ ┘──,TRKCELL └ ┘──,UCSVerfy └ ┘──,UNIT

$D Rnnn.PRm Display limiting keywords:├─ ──┬ ┬─────── ──┬ ┬─────── ──┬ ┬──────── ──┬ ┬─────────────── ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬────────── ─────�

└ ┘──,ASIS └ ┘──,CCTL └ ┘──,CMPCT └ ┘──,─COMPACT──Z─ └ ┘──,CReator └ ┘──,EJECT └ ┘──,FCBLOAD

�─ ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬────────── ─────────────────────────────────────────────┤└ ┘──,LRECL └ ┘──,PRWIDTH └ ┘──,SELECT └ ┘──,SUSPEND

Selection limiting keywords:├─ ──┬ ┬───────────────────────────────── ──┬ ┬───────────────────────────────────── ────────────────────� └ ┘──, ──┬ ┬─── Burst ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── CKPTMODE ──┬ ┬─ =── ──┬ ┬─PAGE─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─SEC──

�─ ──┬ ┬───────────────────────────────────────── ──┬ ┬───────────────────────────────── ────────────────� └ ┘──, ──┬ ┬─── COPYMARK ──┬ ┬─ =── ──┬ ┬─CONSTANT─ └ ┘──, ──┬ ┬─── CReator ──┬ ┬─ =── creator └ ┘ ─/─ └ ┘─ ¬=─ ├ ┤─DATASET── └ ┘ ─/─ ├ ┤─ ¬=─ ├ ┤─DEFAULT── ├ ┤─ >── ├ ┤─JOB────── └ ┘─ <──

| └ ┘─NONE─────

�─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── DEVFCB ──┬ ┬─ =── devfcb └ ┘──, ──┬ ┬─── DEVFLASH ──┬ ┬─ =── devflash └ ┘ ─/─ ├ ┤─ ¬=─ └ ┘ ─/─ ├ ┤─ ¬=─ ├ ┤─ >── ├ ┤─ >── └ ┘─ <── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬── ──┬ ┬─── C ── ──┬ ┬─ =── fcb └ ┘──, ──┬ ┬── ──┬ ┬─── FLASH ──┬ ┬─ =── flash │ │└ ┘ ─/─ ├ ┤─ ¬=─ │ │└ ┘ ─/─ ├ ┤─ ¬=─ └ ┘── ──┬ ┬─── FCB ├ ┤─ >── └ ┘── ──┬ ┬─── O ──── ├ ┤─ >── └ ┘─/─ └ ┘─ <── └ ┘ ─/─ └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────────────── ──┬ ┬───────────────────────── ──────────────────────� └ ┘──, ──┬ ┬─── Forms ──┬ ┬─ =── ──┬ ┬──form ───────── └ ┘──, ──┬ ┬─── FSS ──┬ ┬─ =── fss └ ┘ ─/─ └ ┘─ ¬=─ │ │┌ ┐─,── └ ┘ ─/─ ├ ┤─ ¬=─ └ ┘──( ───(2) ───� ┴form ) ├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────────── ──────────────────────�| └ ┘──,| ─── ──/─ FSATRACE ──┬ ┬─=── ──┬ ┬─Yes─ └ ┘──,| ──┬ ┬─── JOBname ──┬ ┬─ =── jobname| └ ┘─¬=─ └ ┘─No── └ ┘| ─/─ ├ ┤─ ¬=─

├ ┤─ >── └ ┘─ <──

�─ ──┬ ┬──────────────────────────────── ──┬ ┬───────────────────────────────────── ─────────────────────� └ ┘──, ──┬ ┬─── Mark ──┬ ┬─ =── ──┬ ┬───── └ ┘──, ──┬ ┬── ──┬ ┬─── MODIFY ──┬ ┬─ =── modify └ ┘ ─/─ └ ┘─ ¬=─ ├ ┤─No── │ │└ ┘ ─/─ ├ ┤─ ¬=─ └ ┘─Yes─ └ ┘── ──┬ ┬─── Y ───── ├ ┤─ >── └ ┘ ─/─ └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────────── ──┬ ┬───────────────────────────────── ──────────────────� └ ┘──, ──┬ ┬─── NEWPAGE ──┬ ┬─ =── ──┬ ┬─ALL───── └ ┘──, ──┬ ┬─── Pause ──┬ ┬─ =── ──┬ ┬───── └ ┘ ─/─ └ ┘─ ¬=─ ├ ┤─DEFAULT─ └ ┘ ─/─ └ ┘─ ¬=─ ├ ┤─No── └ ┘─1─────── └ ┘─Yes─

�─ ──┬ ┬──────────────────────────────────── ──┬ ┬────────────────────────────────────────────────── ────� └ ┘──, ──┬ ┬─── PRESELCT ──┬ ┬─ =── ──┬ ┬─No── └ ┘──, ──┬ ┬─── PRMode ──┬ ┬─ =── ──┬ ┬──prmode ───────────── └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘ ─/─ └ ┘─ ¬=─ │ │┌ ┐─,──────── └ ┘──( ───(3) ───� ┴┬ ┬──────── ) └ ┘──prmode

�─ ──┬ ┬─────────────────────────────────────── ───────────────────────────────────────────────────────� └ ┘──, ──┬ ┬── ──┬ ┬─────── CLass ──┬ ┬─ =── queue │ │└ ┘ ──┬ ┬─── ├ ┤─ ¬=─ │ │└ ┘─/─ ├ ┤─ >── └ ┘── ──┬ ┬─── Queue ──── └ ┘─ <── └ ┘ ─/─

�─ ──┬ ┬─────────────────────────────────────────────────── ──┬ ┬─────────────────────────────── ────────� └ ┘──, ──┬ ┬─── Routecde ──┬ ┬─ =── ──┬ ┬──routecde ────────── └ ┘──, ──┬ ┬─── Sep ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ¬=─ │ │┌ ┐─,────────── └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘──( ───� ┴┬ ┬────────── ) └ ┘──routecde

Chapter 1. JES2 Commands Summary 23

Page 34: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬──────────────────────────────────────────── ──┬ ┬───────────────────────────────── ─────────────� └ ┘──, ──┬ ┬─────── SEPCHARS ──┬ ┬─ =── ──┬ ┬─CURRENT─ └ ┘──, ──┬ ┬─── SEPDS ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ──┬ ┬─── └ ┘─ ¬=─ └ ┘─DEFAULT─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘─/─

�─ ──┬ ┬──────────────────────────────────── ──┬ ┬────────────────────────────────────────── ────────────� └ ┘──, ──┬ ┬─── SETUP ──┬ ┬─ =── ──┬ ┬─HALT─── └ ┘──, ──┬ ┬── ──┬ ┬─── K ──── ──┬ ┬─ =── ──┬ ┬─DOUBLE─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─NOHALT─ │ │└ ┘ ─/─ └ ┘─ ¬=─ ├ ┤─R────── └ ┘── ──┬ ┬─── SPACE ├ ┤─RESET── └ ┘ ─/─ ├ ┤─SINGLE─ ├ ┤─TRIPLE─ ├ ┤─1────── ├ ┤─2────── └ ┘─3──────

�─ ──┬ ┬──────────────────────────────────── ──┬ ┬───────────────────────────────── ─────────────────────�| └ ┘──,| ──┬ ┬─── STATUS ──┬ ┬─=── ─── ──ACTIVE─ └ ┘──, | ──┬ ┬─── TRace ──┬ ┬─ =── ──┬ ┬─No──| └ ┘─/─ └ ┘─¬=─ └ ┘| ─/─ └ ┘─ ¬=─ ├ ┤─P───

└ ┘─Yes─

�─ ──┬ ┬───────────────────────────────────── ──┬ ┬──────────────────────────────────── ─────────────────� └ ┘──, ──┬ ┬─── TRANS ──┬ ┬─ =── ──┬ ┬─DEFAULT─ └ ┘──, ──┬ ┬──── TRKCELL ──┬ ┬─ =── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ ¬=─ ├ ┤─No────── └ ┘ ─ /─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘─Yes─────

�─ ──┬ ┬─────────────────────────────── ──┬ ┬──────────────────────────────────── ───────────────────────� └ ┘──, ──┬ ┬── ──┬ ┬─── T ── ──┬ ┬─ =── ucs └ ┘──, ──┬ ┬─── UCSVerfy ──┬ ┬─ =── ──┬ ┬─No── │ │└ ┘ ─/─ ├ ┤─ ¬=─ └ ┘ ─/─ └ ┘─ ¬=─ └ ┘─Yes─ └ ┘── ──┬ ┬─── UCS ├ ┤─ >── └ ┘ ─/─ └ ┘─ <──

�─ ──┬ ┬─────────────────────────── ──┬ ┬─────────────────────────────── ────────────────────────────────┤ └ ┘──, ──┬ ┬─── UNIT ──┬ ┬─ =── unit └ ┘──, ──┬ ┬─── Writer ──┬ ┬─ =── writer └ ┘ ─/─ ├ ┤─ ¬=─ └ ┘ ─/─ ├ ┤─ ¬=─ ├ ┤─ >── ├ ┤─ >── └ ┘─ <── └ ┘─ <──

$T Modification keywords:├─ ──┬ ┬─────────────────── ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────── ───────────�

└ ┘──,Burst = ──┬ ┬─No── └ ┘──, ──┬ ┬─CHAR─ ─┤ Numeric ├────(1) =char └ ┘──,CKPTLINE =ckptline └ ┘─Yes─ └ ┘─X────

�─ ──┬ ┬─────────────────────── ──┬ ┬───────────────── ──┬ ┬───────────────── ─────────────────────────────�└ ┘──,CKPTMODE = ──┬ ┬─PAGE─ └ ┘──,DEVFCB =devfcb └ ┘──, ──┬ ┬─C─── =fcb

└ ┘─SEC── └ ┘─FCB─

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬────────────────────── ──┬ ┬───────────────────── ────────� └ ┘──, ─── ──/─ FSATRACE ──┬ ┬─=── ──┬ ┬─Yes─ └ ┘──, ──┬ ┬─MODIFY─ =modify └ ┘──, ──┬ ┬─CLass─ =queue └ ┘─¬=─ └ ┘─No── └ ┘─Y────── └ ┘─Queue─

�─ ──┬ ┬──────────────────────────────── ──┬ ┬──────────────────────────── ──────────────────────────────�└ ┘──,RANGE = ──┬ ┬──low ───────────── └ ┘──, ──┬ ┬─K───── = ──┬ ┬─DOUBLE─

└ ┘──( low ──┬ ┬─────── ) └ ┘─SPACE─ ├ ┤─R──────└ ┘──,high ├ ┤─RESET──

├ ┤─SINGLE─ ├ ┤─TRIPLE─ ├ ┤─1────── ├ ┤─2────── └ ┘─3──────

�─ ──┬ ┬───────────────────────────── ─────────────────────────────────────────────────────────────────┤└ ┘─┤ PRINTER Common Keywords ├─

$ADD Keywords:├─ ──┬ ┬────────────────── ──┬ ┬───────────────── ──┬ ┬────────────────────── ─────────────────────────────�

└ ┘──,Burst= ──┬ ┬─No── └ ┘──,CKPTLINE=nnnnn └ ┘──,CKPTMODE= ──┬ ┬─PAGE─ └ ┘─Yes─ └ ┘─SEC──

�─ ──┬ ┬───────────────────────────── ──┬ ┬───────────────────── ──┬ ┬──────────────────────── ────────────� └ ┘─┤ PRINTER Common Keywords ├─ └ ┘──,DEVFCB= ──┬ ┬─xxxx── └ ┘──, ──┬ ┬─C─── = ──┬ ┬─id──── └ ┘─RESET─ └ ┘─FCB─ └ ┘─RESET─

�─ ──┬ ┬───────────────────────── ──┬ ┬────────────────────────── ─┤ PRINTER COMMON Keywords ├───────────┤│ │┌ ┐─,─── └ ┘──,RANGE= ──┬ ┬──J ──────────

└ ┘──, ──┬ ┬─CLass─ = c ───� ┴┬ ┬─── ├ ┤──( m ──┬ ┬──── ) └ ┘─Queue─ └ ┘──c │ │└ ┘──,n ├ ┤──S ────────── ├ ┤──( m ──┬ ┬──── )

│ │└ ┘──,n ├ ┤──T ────────── └ ┘──( m ──┬ ┬──── )

└ ┘──,n

24 OS/390 V2R10 JES2 Commands Summary

Page 35: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

PRINTER Common Keywords:├─ ──┬ ┬───────────────── ──┬ ┬──────────────── ──┬ ┬────────────────────────── ──┬ ┬─────────────────── ────�

└ ┘──,CKPTPAGE=nnnnn └ ┘──,CKPTSEC=ttttt └ ┘──,COPYMARK= ──┬ ┬─CONSTANT─ └ ┘──,CReator=jccccccc ├ ┤─DATASET── ├ ┤─DEFAULT── ├ ┤─JOB──────

| └ ┘─NONE─────

�─ ──┬ ┬──────────────── ──┬ ┬─────────────────── ──┬ ┬──────────────────────────────── ───────────────────�└ ┘──,DEVFLASH=name └ ┘──, ──┬ ┬─FLASH─ =name └ ┘──,Forms= ──┬ ┬──cccccccc ─────────

└ ┘─O───── │ │┌ ┐─,────── └ ┘──( ───(4) ───� ┴cccccccc )

�─ ──┬ ┬─────────────── ──┬ ┬────────────────── ──┬ ┬────────────────────────── ──┬ ┬───────────────── ──────�└ ┘──,FSS=accccccc └ ┘──,JOBname=jobname └ ┘──,LIMit= ──┬ ┬──m ────────── └ ┘──,Mark= ──┬ ┬─────

└ ┘──( m ──┬ ┬──── ) ├ ┤─No──└ ┘──,n └ ┘─Yes─

�─ ──┬ ┬───────────────── ──┬ ┬──────────────────────── ──┬ ┬──────────── ──┬ ┬────────────────── ───────────�└ ┘──,MODE= ──┬ ┬─FSS─ └ ┘──,NEWPAGE= ──┬ ┬─ALL───── └ ┘──,NPRO=tttt └ ┘──,Pause= ──┬ ┬─────

└ ┘─JES─ ├ ┤─DEFAULT─ ├ ┤─No── └ ┘─1─────── └ ┘─Yes─

�─ ──┬ ┬───────────────────────── ──┬ ┬───────────────────── ──┬ ┬───────────────────────────────── ───────�└ ┘──,PLIM= ──┬ ┬──m ────────── └ ┘──,PRESELCT= ──┬ ┬─No── └ ┘──,PRMode= ──┬ ┬──mode ─────────────

└ ┘──( m ──┬ ┬──── ) └ ┘─Yes─ │ │┌ ┐─,──────└ ┘──,n └ ┘──( ───(5) ───� ┴┬ ┬────── )

└ ┘──mode

�─ ──┬ ┬──────────────────────────────────── ──┬ ┬──────────────── ──┬ ┬───────────────────────── ─────────�└ ┘──,Routecde= ──┬ ┬──routecde ────────── └ ┘──,Sep= ──┬ ┬───── └ ┘──,SEPCHARS= ──┬ ┬─CURRENT─

│ │┌ ┐─,────────── ├ ┤─No── └ ┘─DEFAULT─ └ ┘──( ───� ┴┬ ┬────────── ) └ ┘─Yes─ └ ┘──routecde

�─ ──┬ ┬────────────────── ──┬ ┬───────────────────── ──┬ ┬────────────────── ──┬ ┬────────────────────── ───�└ ┘──,SEPDS= ──┬ ┬───── └ ┘──,SETUP= ──┬ ┬─HALT─── └ ┘──,TRace= ──┬ ┬─No── └ ┘──,TRANS= ──┬ ┬─DEFAULT─

├ ┤─No── └ ┘─NOHALT─ ├ ┤─P─── ├ ┤─No────── └ ┘─Yes─ └ ┘─Yes─ └ ┘─Yes─────

�─ ──┬ ┬──────────────────── ──┬ ┬─────────────── ──┬ ┬───────────────────── ──┬ ┬────────────── ────────────�└ ┘──,TRKCELL= ──┬ ┬─No── └ ┘──, ──┬ ┬─T─── =id └ ┘──,UCSVerfy= ──┬ ┬─No── └ ┘──,UNIT=devnum

└ ┘─Yes─ └ ┘─UCS─ └ ┘─Yes─

�─ ──┬ ┬──────────────────────────────── ──┬ ┬──────────────── ──┬ ┬───────────────────── ─────────────────┤└ ┘──,Volume= ──┬ ┬──volume ────────── └ ┘──,Writer=writer └ ┘──,WS= ──┬ ┬──ws ───────

│ │┌ ┐─,──────── │ │┌ ┐─,─ └ ┘──( ───� ┴┬ ┬──────── ) └ ┘──( ───� ┴─ws ) └ ┘──volume

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 form can be coded up to 8 times.3 prmode can be coded up to 8 times.4 form can be coded up to 8 times.5 prmode can be coded up to 8 times (mode1,mode2,...,mode8).

$D RDR(nn) and $D R(n).RD(m) - Display Command Authority for a Reader, $DRDI

��─ ──┬ ┬─┤ $D READER ... ├─ ─────────────────────────────────────────────────────────────────────────�! └ ┘─┤ $D R(n).RD(m) ├─

$D R(n).RD(m):├─ ──$D ─R─ ──┬ ┬──────────────── ─.RD─ ──┬ ┬──────────────── ──────────────────────────────────────────────� └ ┘─┤ Numeric ├────(1) └ ┘─┤ Numeric ├────(1)

�─ ──┬ ┬───────────────────────────────────────────────── ─────────────────────────────────────────────�└ ┘───┤ $D R(n).RD(m) Selection limiting keywords ├─

�─ ──┬ ┬─────────────────────────────────────────────── ───────────────────────────────────────────────┤└ ┘───┤ $D R(n).RD(m) Display limiting keywords ├─

$D R(n).RD(m) Display limiting keywords:

Chapter 1. JES2 Commands Summary 25

Page 36: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├──┤ Common Display Limiting Keywords ├─────────────────────────────────────────────────────────────┤

$D R(n).RD(m) Selection limiting keywords:├──┤ Common Selection Limiting Keywords ├───────────────────────────────────────────────────────────┤

$D READER ...:├─ ──$D ── ──┬ ┬─RDR──── ──┬ ┬──────────────── ──┬ ┬──────────────────────────────────────── ────────────────� ├ ┤─READER─ └ ┘─┤ Numeric ├────(1) └ ┘─┤ $D RDI Selection limiting Keywords ├─ └ ┘ ─RDI────

�─ ──┬ ┬────────────────────────────────────── ──┬ ┬─────────── ─────────────────────────────────────────� └ ┘─┤ $D RDI Display limiting Keywords ├─ └ ┘─┤ L= ├────(1)

�─ ──┬ ┬────────────────────────────────────────────── ────────────────────────────────────────────────�└ ┘───┤ $D RDR(nn) Selection limiting keywords ├─

�─ ──┬ ┬──────────────────────────────────────────── ──────────────────────────────────────────────────┤└ ┘───┤ $D RDR(nn) Display limiting keywords ├─

Common Display Limiting Keywords:├─ ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬───────────────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬──────────────── ──────�

└ ┘──,Class └ ┘──,Hold └ ┘──, ──┬ ┬─MSGclass─ └ ┘──,PRIOINC └ ┘──,PRIOLIM └ ┘──, ──┬ ┬─P─────── └ ┘─Q──────── └ ┘─PRTDEST─

�─ ──┬ ┬──────────────── ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬──────── ──┬ ┬────────── ──────────────────────────┤└ ┘──, ──┬ ┬─PUNDEST─ └ ┘──,STATUS └ ┘──,Sysaff └ ┘──,TRace └ ┘──,Xeqdest

└ ┘─U───────

$D RDR(nn) Display limiting keywords:├─ ──┬ ┬────────────────────────────── ──┬ ┬────────────────────────────────────── ──────────────────────┤

└ ┘──,Auth ──┬ ┬─────────────────── └ ┘─┤ Common Display Limiting Keywords ├─ │ │┌ ┐─,────────

└ ┘──=( ───� ┴┬ ┬──Device )├ ┤ ─ ─Job ───

└ ┘──System

$D RDR(nn) Selection limiting keywords:├─ ──┬ ┬─────────────────────────────────────────────────────── ──┬ ┬──────────────────────────────── ───� │ │┌ ┐─,──────────────────────────────── └ ┘──, ──┬ ┬─── PRIOINC ──┬ ┬─=── prioinc └ ┘──, ──┬ ┬─── Auth=( ───� ┴┬ ┬── ──┬ ┬─── Device ──┬ ┬─=── ──┬ ┬─No── ) └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ ├ ┤─>── ├ ┤── ──┬ ┬─── Job ──┬ ┬─=── ──┬ ┬─No── ─── └ ┘─<── │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘── ──┬ ┬─── System ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─

�─ ──┬ ┬──────────────────────────────── ──┬ ┬────────────────────────── ────────────────────────────────� └ ┘──, ──┬ ┬─── PRIOLIM ──┬ ┬─=── priolim └ ┘──, ──┬ ┬─── UNIT ──┬ ┬─=── unit └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�──┤ Common Selection Limiting Keywords ├───────────────────────────────────────────────────────────┤

Common Selection Limting Keywords:├─ ──┬ ┬──────────────────────────── ──┬ ┬──────────────── ──┬ ┬──────────────────────────────── ──────────� └ ┘──, ──┬ ┬─── Class ──┬ ┬─=── class └ ┘──, ──┬ ┬─── STATUS └ ┘──, ──┬ ┬─── TRace ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ └ ┘─/─ └ ┘─ê=─ ├ ┤─P─── ├ ┤─>── └ ┘─Yes─ └ ┘─<──

�─ ──┬ ┬──────────────────────────────────────── ──┬ ┬─────────────────────────────── ───────────────────┤ └ ┘──, ──┬ ┬── ──┬ ┬─── MSGclass ──┬ ┬─=── msgclass └ ┘──, ──┬ ┬─── Hold ──┬ ┬─=── ──┬ ┬───── │ │└ ┘─/─ ├ ┤─ê=─ └ ┘─/─ └ ┘─ê=─ ├ ┤─No── └ ┘── ──┬ ┬─── Q ─────── ├ ┤─>── └ ┘─Yes─ └ ┘─/─ └ ┘─<──

$D RDI Selection limiting Keywords:├─ ──┬ ┬─────────────────────────────────────────────────────── ──┬ ┬──────────────────────────────── ───� │ │┌ ┐─,──────────────────────────────── └ ┘──, ──┬ ┬─── TRace ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ──┬ ┬─── Auth=( ───� ┴┬ ┬── ──┬ ┬─── Device ──┬ ┬─=── ──┬ ┬─No── ) └ ┘─/─ └ ┘─ê=─ ├ ┤─P─── └ ┘─/─ │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘─Yes─ ├ ┤── ──┬ ┬─── Job ──┬ ┬─=── ──┬ ┬─No── ─── │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘── ──┬ ┬─── System ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─

26 OS/390 V2R10 JES2 Commands Summary

Page 37: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬──────────────────────────────────────── ──┬ ┬─────────────────────────────── ───────────────────� └ ┘──, ──┬ ┬── ──┬ ┬─── MSGclass ──┬ ┬─=── msgclass └ ┘──, ──┬ ┬─── Hold ──┬ ┬─=── ──┬ ┬───── │ │└ ┘─/─ ├ ┤─ê=─ └ ┘─/─ └ ┘─ê=─ ├ ┤─No── └ ┘── ──┬ ┬─── Q ─────── ├ ┤─>── └ ┘─Yes─ └ ┘─/─ └ ┘─<──

�─ ──┬ ┬──────────────────────────── ──┬ ┬────────────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── Class ──┬ ┬─=── class └ ┘──, ──┬ ┬─── PRTDEST ──┬ ┬─=── ─── ──prtdest─ └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ └ ┘─ê=─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬────────────────────────────────────── ────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── PUNDEST ──┬ ┬─=── ─── ──pundest─ └ ┘─/─ └ ┘─ê=─

$D RDI Display limiting Keywords:├─ ──┬ ┬────────────────────────────── ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬───────────────── ──┬ ┬──────── ────────�

└ ┘──,Auth ──┬ ┬─────────────────── └ ┘──,Class └ ┘──,Hold └ ┘──, ──┬ ┬─MSGclass─ └ ┘──,OWNER │ │┌ ┐─,──────── └ ┘─Q────────

└ ┘──=( ───� ┴┬ ┬──Device )├ ┤ ─ ─Job ───

└ ┘──System

�─ ──┬ ┬──────────────── ──┬ ┬──────────────── ──┬ ┬───────── ──┬ ┬──────── ─────────────────────────────────┤└ ┘──, ─── ──PRTDEST─ └ ┘──, ─── ──PUNDEST─ └ ┘──,Sysaff └ ┘──,TRace

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$T RDRnn and $T Rnnnn.RDm - Control a Reader

��─ ──$T ── ──┬ ┬─RDR──── ─┤ Numeric ├────(1) ──┬ ┬─────────────────────────────────── ────────────────────────�└ ┘─READER─ └ ┘───┤ Selection limiting keywords ├─

�─ ──┬ ┬───────────────────────────── ────────────────────────────────────────────────────────────────�!└ ┘───┤ Modification keywords ├─

Modification keywords:├─ ──┬ ┬────────────────────────────────── ──┬ ┬────────────── ──┬ ┬───────────────── ─────────────────────�

│ │┌ ┐─,────────────────── └ ┘──,Class=class └ ┘──,Hold= ──┬ ┬─────└ ┘──,Auth=( ───� ┴┬ ┬──Device= ──┬ ┬─No── ) ├ ┤─No──

│ │└ ┘─Yes─ └ ┘─Yes─├ ┤──Job= ──┬ ┬─No── ───

│ │└ ┘─Yes─└ ┘──System= ──┬ ┬─No──

└ ┘─Yes─

�─ ──┬ ┬─────────────────── ──┬ ┬────────────────── ──┬ ┬─────────────────── ──────────────────────────────�└ ┘──, ──┬ ┬─MSGclass─ =v └ ┘──,PRIOINC= ──┬ ┬─n─ └ ┘──,PRIOLIM= ──┬ ┬─n──

└ ┘─Q──────── └ ┘─X─ └ ┘─15─

�─ ──┬ ┬──────────────────────── ──┬ ┬──────────────────────── ──────────────────────────────────────────� └ ┘──, ──┬ ┬─P─────── =prtdest └ ┘──, ──┬ ┬─PUNDEST─ =pundest └ ┘─PRTDEST─ └ ┘─U───────

�─ ──┬ ┬────────────────────────────────────────── ──┬ ┬────────────────── ──┬ ┬───────────────────── ─────�└ ┘──,Sysaff= ──┬ ┬── ──┬ ┬─ANY───── ───────────── └ ┘──,TRace= ──┬ ┬─No── └ ┘──,UNIT= ──┬ ┬─devnum──

│ │├ ┤─+─────── ├ ┤─P─── └ ┘─/devnum─ │ │├ ┤─-─────── └ ┘─Yes─ │ │├ ┤─IND───── │ │├ ┤─memname─ │ │└ ┘─R─────── │ │┌ ┐─,─────────────── └ ┘──( ───(2) ───� ┴┬ ┬─────────────── ) └ ┘── ──┬ ┬─ANY───── ├ ┤─+─────── ├ ┤─-─────── ├ ┤─IND───── ├ ┤─memname─ └ ┘─R───────

�─ ──┬ ┬────────────────── ────────────────────────────────────────────────────────────────────────────┤└ ┘──,Xeqdest=xeqdest

Selection limiting keywords:

Chapter 1. JES2 Commands Summary 27

Page 38: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬─────────────────────────────────────────────────────── ──┬ ┬──────────────────────── ───────────� │ │┌ ┐─,──────────────────────────────── └ ┘──, ─── ──/─ Class ──┬ ┬─=── a └ ┘──, ──┬ ┬─── Auth=( ───� ┴┬ ┬── ──┬ ┬─── Device ──┬ ┬─=── ──┬ ┬─No── ) ├ ┤─ê=─ └ ┘─/─ │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ ├ ┤─>── ├ ┤── ──┬ ┬─── Job ──┬ ┬─=── ──┬ ┬─No── ─── └ ┘─<── │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘── ──┬ ┬─── System ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─

�─ ──┬ ┬─────────────────────────────── ──┬ ┬───────────────────────────────── ──────────────────────────� └ ┘──, ──┬ ┬─── Hold ──┬ ┬─=── ──┬ ┬───── └ ┘──, ──┬ ┬── ──┬ ┬─── MSGclass ──┬ ┬─=── v └ ┘─/─ └ ┘─ê=─ ├ ┤─No── │ │└ ┘─/─ ├ ┤─ê=─ └ ┘─Yes─ └ ┘── ─── ──/─ Q ─────── ├ ┤─>── └ ┘─<──

�─ ──┬ ┬──────────────────────────────── ──┬ ┬───────────────────────────────── ─────────────────────────� └ ┘──, ──┬ ┬─── PRIOINC ──┬ ┬─=── ──┬ ┬─n─ └ ┘──, ──┬ ┬─── PRIOLIM ──┬ ┬─=── ──┬ ┬─n──

└ ┘─/─ ├ ┤─ê=─ └ ┘─X─ └ ┘─/─ ├ ┤─ê=─ └ ┘─15─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬──────────────────────────────── ──┬ ┬─────────────────────────────────────── ───────────────────┤ └ ┘──, ──┬ ┬─── TRace ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ──┬ ┬─── UNIT ──┬ ┬─=── ──┬ ┬─devnum── unit └ ┘─/─ └ ┘─ê=─ ├ ┤─P─── └ ┘─/─ ├ ┤─ê=─ └ ┘─/devnum─ └ ┘─Yes─ ├ ┤─>── └ ┘─<──

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 sysaff can be coded up to 33 times.

$T INTRDR - Control Internal Readers

��─ ──┬ ┬─$T─ ──INTRDR ──┬ ┬───────────────────────────────────────── ────────────────────────────────────� └ ┘─$D─ └ ┘───┤ $D Only Display limiting keywords ├─

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────────────── ─────────────────�!└ ┘───┤ Selection limiting keywords ├─ └ ┘───┤ $T Only Modification keywords ├─

$D Only Display Limiting keywords:├─ ──┬ ┬──────────────────────── ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬────────── ──────�

│ │┌ ┐─,──────── └ ┘──,BATCH └ ┘──,Class └ ┘──,Hold └ ┘──,HONORlim └ ┘──,PRTYINC└ ┘──,Auth=( ───� ┴┬ ┬──Device )

├ ┤ ─ ─Job ─── └ ┘──System

�─ ──┬ ┬────────── ──┬ ┬─────────────── ──┬ ┬──────── ─────────────────────────────────────────────────────┤└ ┘──,PRTYLIM └ ┘──,Sysaff ─── ─── └ ┘──,TRace

$T Only Modification keywords:├─ ──┬ ┬────────────────────────────────── ──┬ ┬────────────── ──┬ ┬───────────────── ─────────────────────�

│ │┌ ┐─,────────────────── └ ┘──,Class=class └ ┘──,Hold= ──┬ ┬─No──└ ┘──,Auth=( ───� ┴┬ ┬──Device= ──┬ ┬─No── ) └ ┘─Yes─

│ │└ ┘─Yes─├ ┤──Job= ──┬ ┬─No── ───

│ │└ ┘─Yes─└ ┘──System= ──┬ ┬─No──

└ ┘─Yes─

�─ ──┬ ┬───────────────────── ──┬ ┬────────────── ──┬ ┬────────────── ─────────────────────────────────────�└ ┘──,HONORlim= ──┬ ┬─No── └ ┘──,PRTYINC=n-n └ ┘──,PRTYLIM=n-n

└ ┘─Yes─

28 OS/390 V2R10 JES2 Commands Summary

Page 39: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬────────────────────────────────────────── ──┬ ┬────────────────── ──────────────────────────────┤└ ┘──,Sysaff= ──┬ ┬── ──┬ ┬─ANY───── ───────────── └ ┘──,TRace= ──┬ ┬─No──

│ │├ ┤─+─────── ├ ┤─P─── │ │├ ┤─-─────── └ ┘─Yes─ │ │├ ┤─IND───── │ │├ ┤─memname─ │ │└ ┘─�─────── │ │┌ ┐─,─────────────── └ ┘──( ───(1) ───� ┴┬ ┬─────────────── ) └ ┘── ──┬ ┬─ANY───── ├ ┤─+─────── ├ ┤─-─────── ├ ┤─IND───── ├ ┤─memname─ └ ┘─�───────

Selection limiting keywords:├─ ──┬ ┬─────────────────────────────────────────────────────── ───────────────────────────────────────┤ │ │┌ ┐─,──────────────────────────────── └ ┘──, ──┬ ┬─── Auth=( ───� ┴┬ ┬── ──┬ ┬─── Device ──┬ ┬─=── ──┬ ┬─No── ) └ ┘─/─ │ │└ ┘ ─/─ └ ┘─ê=─ └ ┘─Yes─ ├ ┤── ──┬ ┬─── Job ──┬ ┬─=── ──┬ ┬─No── ─── │ │└ ┘ ─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘── ──┬ ┬─── System ──┬ ┬─=── ──┬ ┬─No── └ ┘ ─/─ └ ┘─ê=─ └ ┘─Yes─

Note:1 sysaff can be coded up to 33 times.

$T, $D Punch (PUNCHnn, PUNnn, Rnnnn.PUm)

��─ ──┬ ┬──$T ──┬ ┬─PUN─── ─┤ Numeric ├────(1) ──────────────────────────────── ──────────────────────────────� │ │└ ┘─PUNCH─ ├ ┤ ─$T──R──┤ Numeric ├────(1) ─.PU──┤ Numeric ├────(1) ─────────────────── ├ ┤ ──$D ──┬ ┬─PUN─── ──┬ ┬──────────────── ──┬ ┬─────────── ───────────── │ │└ ┘─PUNCH─ └ ┘─┤ Numeric ├────(1) └ ┘─┤ L= ├────(1)

└ ┘ ─$D──R─ ──┬ ┬──────────────── ─.PU─ ──┬ ┬──────────────── ─┤ L= ├────(1)

└ ┘─┤ Numeric ├────(1) └ ┘─┤ Numeric ├────(1)

�─ ──┬ ┬──────────────────────────────────────────── ──┬ ┬─────────────────────────────────────────── ───�└ ┘───┤ $ D COMMON Display Limiting Keywords ├─ └ ┘───┤ $ D PUNCH Display Limiting Keywords ├─

�─ ──┬ ┬────────────────────────────────────────────── ──┬ ┬─────────────────────────────────── ─────────�└ ┘───┤ $ D Rnnn.PUm Display Limiting Keywords ├─ └ ┘───┤ Selection limiting keywords ├─

�─ ──┬ ┬───────────────────────────────────── ────────────────────────────────────────────────────────�!└ ┘───┤ $T Only Modification keywords ├─

$D COMMON Display limiting keywords:├─ ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬───────── ───�

└ ┘──,CKPTLINE └ ┘──,CKPTPAGE └ ┘──,CReator └ ┘──,Forms └ ┘──,JOBname └ ┘──,LIMit └ ┘──,PRMode

�─ ──┬ ┬────────────── ──┬ ┬──────── ──┬ ┬─────────── ──┬ ┬────── ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬───────── ──────�└ ┘──, ──┬ ┬─CLass─ └ ┘──,RANGE └ ┘──,Routecde └ ┘──,Sep └ ┘──,SEPDS └ ┘──,SETUP └ ┘──,STATUS

└ ┘─Queue─

�─ ──┬ ┬──────── ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬───── ───────────────────────────────────────────────────┤└ ┘──,TRace └ ┘──,Volume └ ┘──,Writer └ ┘──,WS

$D PUNCH Display limiting keywords:├─ ──┬ ┬──────── ──┬ ┬─────── ───────────────────────────────────────────────────────────────────────────┤

└ ┘──,Pause └ ┘──,UNIT

$D Rnnn.PUm Display limiting keywords:├─ ──┬ ┬─────────── ──┬ ┬─────── ──┬ ┬──────── ──┬ ┬──────────────── ──┬ ┬─────────── ──┬ ┬──────── ─────────────�

└ ┘──,CKPTLINE └ ┘──,CCTL └ ┘──,CMPCT └ ┘──, ──┬ ┬─COMPACT─ └ ┘──,COMPress └ ┘──,FLUSH └ ┘─Z───────

�─ ──┬ ┬──────── ──┬ ┬───────── ──┬ ┬────────── ───────────────────────────────────────────────────────────┤└ ┘──,LRECL └ ┘──,SELECT └ ┘──,SUSPEND

$T Only Modification keywords:├─ ──┬ ┬───────────────────── ──┬ ┬───────────────────── ──┬ ┬─────────────────── ─────────────────────────�

└ ┘──,CKPTLINE =ckptline └ ┘──,CKPTPAGE =ckptpage └ ┘──,CReator =creator

Chapter 1. JES2 Commands Summary 29

Page 40: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬───────────────────────────── ──┬ ┬─────────────────── ──┬ ┬───────────────────────────────── ─────�└ ┘──,Forms = ──┬ ┬──form ───────── └ ┘──,JOBname =jobname └ ┘──,LIMit = ──┬ ┬──low ──────────────

│ │┌ ┐─,── └ ┘──( low ──┬ ┬──────── )└ ┘──( ───(2) ───� ┴form ) └ ┘──, high

�─ ──┬ ┬─────────────────── ──┬ ┬──────────────────────────────────── ──┬ ┬───────────────────── ──────────�└ ┘──,Pause = ──┬ ┬───── └ ┘──,PRMode = ──┬ ┬──prmode ───────────── └ ┘──, ──┬ ┬─CLass─ =queue

├ ┤─No── │ │┌ ┐─,──────── └ ┘─Queue─ └ ┘─Yes─ └ ┘──( ───(3) ───� ┴┬ ┬──────── ) └ ┘──prmode

�─ ──┬ ┬──────────────────────────────── ──┬ ┬───────────────────────────────────── ─────────────────────�└ ┘──,RANGE = ──┬ ┬──low ───────────── └ ┘──,Routecde = ──┬ ┬──routecde ──────────

└ ┘──( low ──┬ ┬─────── ) │ │┌ ┐─,──────────└ ┘──,high └ ┘──( ───� ┴┬ ┬────────── )

└ ┘──routecde

�─ ──┬ ┬───────────────── ──┬ ┬─────────────────── ──┬ ┬────────────────────── ──┬ ┬─────────────────── ─────�└ ┘──,Sep = ──┬ ┬───── └ ┘──,SEPDS = ──┬ ┬───── └ ┘──,SETUP = ──┬ ┬─HALT─── └ ┘──,TRace = ──┬ ┬─No──

├ ┤─No── ├ ┤─No── └ ┘─NOHALT─ ├ ┤─P─── └ ┘─Yes─ └ ┘─Yes─ └ ┘─Yes─

�─ ──┬ ┬───────────── ──┬ ┬───────────────────────────────── ──┬ ┬───────────────── ───────────────────────�└ ┘──,UNIT =unit └ ┘──,Volume = ──┬ ┬──volume ────────── └ ┘──,Writer =writer

│ │┌ ┐─,──────── └ ┘──( ───� ┴┬ ┬──────── ) └ ┘──volume

�─ ──┬ ┬────────────────────── ────────────────────────────────────────────────────────────────────────┤└ ┘──,WS = ──┬ ┬──ws ───────

│ │┌ ┐─,─ └ ┘──( ───� ┴─ws )

Selection Keywords:├─ ──┬ ┬───────────────────────────────── ──┬ ┬─────────────────────────────────────────── ──────────────� └ ┘──, ──┬ ┬─── CReator ──┬ ┬─ =── creator └ ┘──, ──┬ ┬─── Forms ──┬ ┬─ =── ──┬ ┬──form ───────── └ ┘─/─ ├ ┤─ ê=─ └ ┘─/─ └ ┘─ ê=─ │ │┌ ┐─,── ├ ┤─ >── └ ┘──( ───(2) ───� ┴form ) └ ┘─ <──

�─ ──┬ ┬───────────────────────────────── ──┬ ┬───────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── JOBname ──┬ ┬─ =── jobname └ ┘──, ──┬ ┬─── Pause ──┬ ┬─ =── ──┬ ┬───── └ ┘─/─ ├ ┤─ ê=─ └ ┘─/─ └ ┘─ ê=─ ├ ┤─No── ├ ┤─ >── └ ┘─Yes─ └ ┘─ <──

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬─────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬── ──┬ ┬─── CLass ──┬ ┬─ =── queue └ ┘──, ──┬ ┬─── Sep ──┬ ┬─ =── ──┬ ┬───── │ │└ ┘─/─ ├ ┤─ ê=─ └ ┘─/─ └ ┘─ ê=─ ├ ┤─No── └ ┘── ──┬ ┬─── Queue ├ ┤─ >── └ ┘─Yes─ └ ┘─/─ └ ┘─ <──

�─ ──┬ ┬───────────────────────────────── ──┬ ┬──────────────────────────────────── ─────────────────────� └ ┘──, ──┬ ┬─── SEPDS ──┬ ┬─ =── ──┬ ┬───── └ ┘──, ──┬ ┬─── SETUP ──┬ ┬─ =── ──┬ ┬─HALT─── └ ┘─/─ └ ┘─ ê=─ ├ ┤─No── └ ┘─/─ └ ┘─ ê=─ └ ┘─NOHALT─ └ ┘─Yes─

�─ ──┬ ┬──────────────────────────────────── ──┬ ┬───────────────────────────────── ─────────────────────�| └ ┘──,| ──┬ ┬─── STATUS ──┬ ┬─=── ─── ──ACTIVE─ └ ┘──, | ──┬ ┬─── TRace ──┬ ┬─ =── ──┬ ┬─No──| └ ┘─/─ └ ┘─¬=─ └ ┘─/─ └ ┘─ ê=─ ├ ┤─P───

└ ┘─Yes─

�─ ──┬ ┬─────────────────────────── ──┬ ┬─────────────────────────────── ────────────────────────────────┤ └ ┘──, ──┬ ┬─── UNIT ──┬ ┬─ =── unit └ ┘──, ──┬ ┬─── Writer ──┬ ┬─ =── writer └ ┘─/─ ├ ┤─ ê=─ └ ┘─/─ ├ ┤─ ê=─ ├ ┤─ >── ├ ┤─ >── └ ┘─ <── └ ┘─ <──

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 form can be coded up to 8 times.3 prmode can be coded up to 8 times.

30 OS/390 V2R10 JES2 Commands Summary

Page 41: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$ADD, $T , $D REDIRECT, $D PATH

��─ ──┬ ┬ ──┬ ┬─$ADD─ ─REDIRect─ ─┤ Identifier ├────(1) ──┬ ┬─────────────────────────────── ───────────────────� │ │├ ┤─$T─── └ ┘─┤ $ADD and $T Only Keywords ├─ │ │└ ┘─$D─── └ ┘ ─── ──$D─ ─PATH───────

�─ ──┬ ┬─────────────────────────────── ──────────────────────────────────────────────────────────────�! └ ┘─┤ $D REDIRECT Only Keywords ├─

$ADD and $T Only Keywords:├─ ──┬ ┬────────────── ──┬ ┬──────────────────── ──┬ ┬─────────────── ──┬ ┬────────────── ───────────────────�

└ ┘──,DA=con_spec └ ┘──,DCONNECT=con_spec └ ┘──,DEF=con_spec └ ┘──,DF=con_spec

�─ ──┬ ┬────────────── ──┬ ┬──────────────────── ──┬ ┬────────────── ──┬ ┬───────────────── ─────────────────�└ ┘──,DI=con_spec └ ┘──, ──┬ ┬─DJ─ =con_spec └ ┘──,DN=con_spec └ ┘──,DNODE=con_spec

├ ┤─DS─ └ ┘─DT─

�─ ──┬ ┬────────────── ──┬ ┬──────────────── ──┬ ┬────────────── ──┬ ┬──────────────────── ──────────────────┤└ ┘──,DQ=con_spec └ ┘──,DSPL=con_spec └ ┘──,DU=con_spec └ ┘──, ──┬ ┬─LJ─ =con_spec

├ ┤─LS─ └ ┘─LT─

$D REDIRECT ONLY Keywords:├─ ──┬ ┬───── ──┬ ┬─────────── ──┬ ┬────── ──┬ ┬───── ──┬ ┬───── ──┬ ┬─────────── ──┬ ┬───── ──┬ ┬──────── ──────────�

└ ┘──,DA └ ┘──,DCONNECT └ ┘──,DEF └ ┘──,DF └ ┘──,DI └ ┘──, ──┬ ┬─DJ─ └ ┘──,DN └ ┘──,DNODE ├ ┤─DS─ └ ┘─DT─

�─ ──┬ ┬───── ──┬ ┬─────── ──┬ ┬───── ──┬ ┬─────────── ──────────────────────────────────────────────────────┤└ ┘──,DQ └ ┘──,DSPL └ ┘──,DU └ ┘──, ──┬ ┬─LJ─

├ ┤─LS─ └ ┘─LT─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).

$ADD, $T RMT

��─ ──┬ ┬─$ADD─ ──RMT ─── ──┤ Numeric ├────(1) ──┬ ┬─────────────────────────── ──────────────────────────────�! └ ┘─$T─── └ ┘─┤ $ADD and $T Keywords ├─

$ADD and $T Keywords:├─ ──┬ ┬──────────────────── ──┬ ┬────────────────── ──┬ ┬─────────────────── ──┬ ┬────────────────── ───────�

└ ┘──,Autolog= ──┬ ┬─No── └ ┘──,BLOCK= ──┬ ┬─No── └ ┘──,BUFEXPAN= ──┬ ┬─X─ └ ┘──,BUFSIZE=bufsize └ ┘─Yes─ └ ┘─Yes─ ├ ┤─1─ └ ┘─2─

�─ ──┬ ┬──────────────────── ──┬ ┬───────────────────── ──┬ ┬────────────────── ──┬ ┬───────────────── ──────�└ ┘──,COMPACT= ──┬ ┬─No── └ ┘──,COMPRESS= ──┬ ┬─No── └ ┘──,CONDEST=condest └ ┘──,CONS= ──┬ ┬─No──

└ ┘─Yes─ └ ┘─Yes─ └ ┘─Yes─

Chapter 1. JES2 Commands Summary 31

Page 42: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬────────────────────────── ──┬ ┬──────────────────── ──┬ ┬────────────────── ──┬ ┬──────────── ──────�└ ┘──,DEVTYPE= ──┬ ┬─AS/4XX──── └ ┘──,Discintv=discintv └ ┘──,HTABS= ──┬ ┬─No── └ ┘──,LINE=line

├ ┤─AS4XX───── └ ┘─Yes─ ├ ┤─LUTYPE1─── ├ ┤─M2X-2───── ├ ┤─M2X-4───── ├ ┤─M2X-5───── ├ ┤─M2X-6───── ├ ┤─S/3─────── ├ ┤─S/36────── ├ ┤─S/36X───── ├ ┤─S/37X───── ├ ┤─SYSTEM/3── ├ ┤─SYSTEM/36─ ├ ┤─SYSTEM3─── ├ ┤─SYSTEM36── ├ ┤─S36X────── ├ ┤─S37X────── ├ ┤─113X────── ├ ┤─277X────── ├ ┤─278X────── ├ ┤─2922────── ├ ┤─374X────── ├ ┤─378X────── └ ┘─3781──────

�─ ──┬ ┬──────────────────────── ──┬ ┬────────────── ──┬ ┬──────────────── ──┬ ┬──────────────── ────────────�└ ┘──,LOCAL19X= ──┬ ┬─ACTION─ └ ┘──,LOGON=logon └ ┘──,LUNAME=luname └ ┘──,MFORM= ──┬ ┬─J─

└ ┘─INFO─── ├ ┤─M─ └ ┘─T─

�─ ──┬ ┬──────────────────── ──┬ ┬─────────────────── ──┬ ┬──────────────────── ──┬ ┬──────────────── ───────�└ ┘──,MRF278X= ──┬ ┬─No── └ ┘──,MSGPRT= ──┬ ┬─No── └ ┘──,MULTILV= ──┬ ┬─No── └ ┘──,NUMPRt=numprt

└ ┘─Yes─ └ ┘─Yes─ └ ┘─Yes─

�─ ──┬ ┬──────────────── ──┬ ┬──────────────── ──┬ ┬──────────────────── ──┬ ┬─────────────────────── ───────�└ ┘──,NUMPUn=numpun └ ┘──,NUMRDr=numrdr └ ┘──,Password=password └ ┘──,RECFM= ──┬ ┬─FIXED────

└ ┘─VARIABLE─

�─ ──┬ ┬─────────────────── ──┬ ┬──────────────────── ──┬ ┬─────────────────── ────────────────────────────�└ ┘──,RMT15X= ──┬ ┬─No── └ ┘──,Routecde=routecde └ ┘──,SETUP= ──┬ ┬─MSG──

└ ┘─Yes─ └ ┘─PDIR─

�─ ──┬ ┬──────────────────────────── ──┬ ┬───────────────────── ──┬ ┬────────────────── ───────────────────┤└ ┘──, ──┬ ┬─SHARable── = ──┬ ┬─No── └ ┘──,TRANSPAR= ──┬ ┬─No── └ ┘──,WAITIME=waitime

└ ┘─SHAREable─ └ ┘─Yes─ └ ┘─Yes─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$ADD, $D, $T APPL

��─ ──┬ ┬─$ADD─ ──APPL─┤ Value ├────(1) ──┬ ┬──────────────────────────────────── ───────────────────────────� ├ ┤─$D─── └ ┘─┤ $ADD and $T Selection Keywords ├─ └ ┘─$T───

�─ ──┬ ┬─────────────────────────────────────── ──┬ ┬──────────────────────────────── ──────────────────�! └ ┘─┤ $ADD and $T Modification Keywords ├─ └ ┘───┤ $D ONLY Display Keywords ├─

$D ONLY Display Keywords:├─ ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬─────── ──┬ ┬───────── ────────────┤

└ ┘──,COMPACT └ ┘──,LINE └ ┘──,LOGMODE └ ┘──,LOGON └ ┘──,NODE └ ┘──,REST └ ┘──,STATUS

$ADD and $T Selection Keywords:├─ ──┬ ┬──────────────────────────────── ──┬ ┬────────────────────────── ────────────────────────────────� └ ┘──, ──┬ ┬─── COMPACT ──┬ ┬─=── compact └ ┘──, ──┬ ┬─── LINE ──┬ ┬─=── line └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬──────────────────────────────── ──┬ ┬──────────────────────────── ──────────────────────────────� └ ┘──, ──┬ ┬─── LOGMODE ──┬ ┬─=── logmode └ ┘──, ──┬ ┬─── LOGON ──┬ ┬─=── logon └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

32 OS/390 V2R10 JES2 Commands Summary

Page 43: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬────────────────────────── ──┬ ┬──────────────────────────────────────────── ────────────────────┤ └ ┘──, ──┬ ┬─── NODE ──┬ ┬─=── node └ ┘──, ──┬ ┬─── STATUS ──┬ ┬─=── ──┬ ┬─IN-SESSION───── └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ └ ┘─ê=─ ├ ┤─NOT-IN-SESSION─ ├ ┤─>── ├ ┤─OPNDST-PENDING─ └ ┘─<── └ ┘─OPNSEC-PENDING─

$ADD and $T Modification Keywords:├─ ──┬ ┬────────────────── ──┬ ┬──────────── ──┬ ┬────────────────── ──┬ ┬────────────── ──┬ ┬──────────── ────┤

└ ┘──,COMPACT=compact └ ┘──,LINE=line └ ┘──,LOGMODE=logmode └ ┘──,LOGON=logon └ ┘──,NODE=node

$ADD Only Keywords:├─ ──┬ ┬──────────── ──────────────────────────────────────────────────────────────────────────────────┤

└ ┘──,REST=rest

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).

$D, $T PCE

��─ ── ──┬ ┬─$D─ ──PCE ──┬ ┬──────────────── ──┬ ┬────────────────────────────────────────── ────────────────�└ ┘─$T─ └ ┘─┤ Identifier ├─ └ ┘───┤ Common Selection limiting keywords ├─

�─ ──┬ ┬─────────────────────────────────────────── ───────────────────────────────────────────────────�└ ┘───┤ $D Only - Display limiting keywords ├─

�─ ──┬ ┬───────────────────────────────────────────── ──┬ ┬─────────────────────────────────────── ─────�!└ ┘───┤ $D Only - Selection limiting keywords ├─ └ ┘───┤ $T Only - Modification keywords ├─

$T Only - Modification keywords:├─ ──┬ ┬────────────────── ────────────────────────────────────────────────────────────────────────────┤

└ ┘──,TRace= ──┬ ┬─No── ├ ┤─P─── └ ┘─Yes─

$D Only - Display limiting keywords:├─ ──┬ ┬───────── ──┬ ┬──────────── ──┬ ┬────────────────────────────────── ──┬ ┬────────── ──┬ ┬─────── ──────�

└ ┘──,ACTive └ ┘──,Allocated └ ┘──,COUNT ──┬ ┬────────────────────── └ ┘──,Defined └ ┘──,DESC │ │┌ ┐─,───────────

└ ┘──=( ───� ┴┬ ┬──Allocated ) ├ ┤──Defined ── └ ┘──Ended ────

�─ ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬──────── ─────────────────────────────────────────────────┤└ ┘──,DETails └ ┘──,Ended └ ┘──,LONG └ ┘──,TRace

$D Only - Selection limiting keywords:├─ ──┬ ┬─────────────────────────────────────────────────────────── ───────────────────────────────────┤ │ │┌ ┐─,─────────────────────────────────── └ ┘──, ──┬ ┬─── COUNT=( ───� ┴┬ ┬── ──┬ ┬─── Allocated ──┬ ┬─=── allocated ) └ ┘─/─ │ │└ ┘─/─ ├ ┤─¬=─ │ │├ ┤─>── │ │└ ┘─<── ├ ┤── ──┬ ┬─── Defined ──┬ ┬─=── defined ──── │ │└ ┘─/─ ├ ┤─¬=─ │ │├ ┤─>── │ │└ ┘─<── └ ┘── ──┬ ┬─── Ended ──┬ ┬─=── ended ──────── └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

Common Selection limiting keywords:├─ ──┬ ┬────────────────────────────── ──┬ ┬──────────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── ACTive ──┬ ┬─=── active └ ┘──, ──┬ ┬─── Allocated ──┬ ┬─=── allocated └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬──────────────────────────────── ──┬ ┬──────────────────────────── ──────────────────────────────� └ ┘──, ──┬ ┬─── Defined ──┬ ┬─=── defined └ ┘──, ──┬ ┬─── Ended ──┬ ┬─=── ended └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

Chapter 1. JES2 Commands Summary 33

Page 44: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬────────────────────────────────── ────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── TRace ──┬ ┬─=── ──┬ ┬─────── └ ┘─/─ └ ┘─¬=─ ├ ┤─MIXED─ ├ ┤─No──── ├ ┤─P───── └ ┘─Yes───

Note:1 See “JES2 Commands Common Syntax Elements” on page 6

$AA, $HA Release/Hold Jobs

��─ ──┬ ┬─$A─ ──A ──┬ ┬────────── ───────────────────────────────────────────────────────────────────────�! └ ┘─$H─ ├ ┤─,memname─ └ ┘─,ALL─────

$D MODULE(jxxxxxxx) - Display Assembled Module Information

��─ ──$D ──MODule ──┬ ┬────────────── ──┬ ┬─────────────────────────────────── ────────────────────────────� └ ┘─┤ Value ├────(1) └ ┘───┤ Selection limiting keywords ├─

�─ ──┬ ┬───────────────────────────────── ────────────────────────────────────────────────────────────�!└ ┘───┤ Display limiting keywords ├─

Display limiting keywords:├─ ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬────────── ────────────────�

| └ ┘──,ADDRess └ ┘──,ASSEMBLY └ ┘──,ENViron └ ┘──,EXITPTS └ ┘──,FMID └ ┘──,IBMJES2

�─ ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬─────────── ────────────────�| └ ┘──,LASTapar └ ┘──,LASTPTF └ ┘──,LENgth └ ┘──,LOADmod └ ┘──,LONG └ ┘──,MACLevel

�─ ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬─────────── ──┬ ┬────────── ────────────┤| └ ┘──,ROUtines └ ┘──,ROUTINES └ ┘──,SPLevel └ ┘──,TABLES └ ┘──,UVERSION └ ┘──,VERSION

Selection limiting keywords:├─ ──┬ ┬──────────────────────────────── ──┬ ┬────────────────────────────────────── ────────────────────� └ ┘──, ──┬ ┬─── ADDRess ──┬ ┬─=── address └ ┘──, ──┬ ┬─── ENViron ──┬ ┬─=── ──┬ ┬─FSS───── └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ ├ ┤─JES2──── ├ ┤─>── ├ ┤─MIXED─── └ ┘─<── ├ ┤─SUBTASK─ └ ┘─USER────

�─ ──┬ ┬───────────────────────────────────── ──┬ ┬────────────────────────────────── ───────────────────� └ ┘──, ──┬ ┬─── IBMJES2 ──┬ ┬─=── ──┬ ┬─BASE─── └ ┘──, ──┬ ┬─── LASTapar ──┬ ┬─=── lastapar └ ┘─/─ └ ┘─¬=─ ├ ┤─No───── └ ┘─/─ ├ ┤─¬=─ └ ┘─SAMPLE─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬────────────────────────────── ──┬ ┬──────────────────────────────── ────────────────────────────� └ ┘──, ──┬ ┬─── LENgth ──┬ ┬─=── length └ ┘──, ──┬ ┬─── LOADmod ──┬ ┬─=── loadmod └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬────────────────────────────────── ──┬ ┬────────────────────────────────────── ──────────────────┤ └ ┘──, ──┬ ┬─── MACLevel ──┬ ┬─=── maclevel └ ┘──, ──┬ ┬─── SPLevel ──┬ ┬─=── ──┬ ┬─CHECK─── └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ └ ┘─NOCHECK─ ├ ┤─>── └ ┘─<──

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$B, $E, $F, $I, $N Printer/Punch

��─ ──┬ ┬ ─$I─────────────────────────────────────────── ──┬ ┬ ──┬ ┬─PRTnnnn─── ──┬ ┬──────────── ───────────�! ├ ┤ ─$N─────────────────────────────────────────── │ │└ ┘─Rnnnn.PRm─ ├ ┤─,PRTnnnn─── ├ ┤ ─$E─────────────────────────────────────────── │ │└ ┘─,Rnnnn.PRm─ └ ┘ ──┬ ┬ ─$B─ ──┬ ┬──── ──┬ ┬─────────────── ──┬ ┬─────── └ ┘ ──┬ ┬─PUNnn───── ──┬ ┬──────────── └ ┘ ─$F─ └ ┘─,D─ └ ┘ ─,C─ ──┬ ┬─────── └ ┘─,nnnn─ └ ┘─Rnnnn.PUm─ ├ ┤─,PUNnn───── └ ┘─,nnnn─ └ ┘─,Rnnnn.PUm─

34 OS/390 V2R10 JES2 Commands Summary

Page 45: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$C, $S, $P, $Z Printer/Punch/Reader

��─ ──┬ ┬─$C─ ──┬ ┬ ──┬ ┬─PRTnnnn─── ──┬ ┬──────────── ─────────────────────────────────────────────────────�! ├ ┤─$S─ │ │└ ┘─Rnnnn.PRm─ ├ ┤─,PRTnnnn─── ├ ┤─$P─ │ │└ ┘─,Rnnnn.PRm─ └ ┘─$Z─ ├ ┤ ──┬ ┬─PUNnn───── ──┬ ┬──────────── │ │└ ┘─Rnnnn.PUm─ ├ ┤─,PUNnn───── │ │└ ┘─,Rnnnn.PUm─ └ ┘ ──┬ ┬─RDRnn───── ──┬ ┬──────────── └ ┘─Rnnnn.RDm─ ├ ┤─,RDRnn───── └ ┘─,Rnnnn.RDm─

$D NETACCT

��─ ─── ──$D─ ── ─── ──NETACCT─ ──┬ ┬─────────────────────────────── ──┬ ┬───────────────────────────────── ─�! └ ┘─┤ Display Limiting Keywords ├─ └ ┘─┤ Selection Limiting Keywords ├─

Display Limiting Keywords:├─ ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬─────── ───────────────────────────────────────────────────┤

└ ┘──,JACCT └ ┘──,JTHRU └ ┘──,NACCT └ ┘──,TYPE

Selection Limiting Keywords:├─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────────────────────────── ────────────────────────────� └ ┘──, ──┬ ┬─── JTHRU ──┬ ┬─ =── ─jthru─ └ ┘──, ──┬ ┬─── JACCT ──┬ ┬─ =── ─jacct─ └ ┘─/─ ├ ┤─ ê=─ └ ┘─/─ ├ ┤─ ê=─ ├ ┤─ >── ├ ┤─ >── └ ┘─ <── └ ┘─ <──

�─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────────────────────────── ────────────────────────────� └ ┘──, ──┬ ┬─── NACCT ──┬ ┬─ =── ─nacct─ └ ┘──, ──┬ ┬─── NTHRU ──┬ ┬─ =── ─nthru─ └ ┘─/─ ├ ┤─ ê=─ └ ┘─/─ ├ ┤─ ê=─ ├ ┤─ >── ├ ┤─ >── └ ┘─ <── └ ┘─ <──

�─ ──┬ ┬───────────────────────────── ─────────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── TYPE ──┬ ┬─ =── ─type─ └ ┘─/─ ├ ┤─ ê=─ ├ ┤─ >── └ ┘─ <──

$C, $E, $P, $S NJE Device, Offload Transmitters and Receivers

��─ ──┬ ┬ ──┬ ┬─$S OFFn─ ──┬ ┬─.JRn─ ──┬ ┬────────── ───────────────────────────────────────────────────────�! │ │├ ┤─$P OFFn─ ├ ┤─.JTn─ ├ ┤─OFFn.JRn─ │ │└ ┘─$C OFFn─ ├ ┤─.SRn─ ├ ┤─OFFn.JTn─ │ │└ ┘─.STn─ ├ ┤─OFFn.SRn─ │ │└ ┘─OFFn.STn─ ├ ┤ ──┬ ┬─$S Lnnnn─ ──┬ ┬─────────── ──────── │ │├ ┤─$P Lnnnn─ ├ ┤─Lnnnn.JRn─ │ │├ ┤─$C Lnnnn─ ├ ┤─Lnnnn.JTn─ │ │└ ┘─$E Lnnnn─ ├ ┤─Lnnnn.SRn─ │ │└ ┘─Lnnnn.STn─ └ ┘ ─$E OFFn─ ──┬ ┬─.JTn─ ──┬ ┬────────── ──── └ ┘─.STn─ ├ ┤─OFFn.JTn─ └ ┘─OFFn.STn─

$D, $T NODE

��─ ──┬ ┬─$D─ ──NODE─┤ Identifier ├────(1) ──┬ ┬─────────────────────────────────── ─────────────────────────� └ ┘─$T─ └ ┘───┤ Selection limiting keywords ├─

�─ ──┬ ┬───────────────────────────────────────── ──┬ ┬─────────────────────────────────── ─────────────�!└ ┘───┤ $D ONLY Display limiting keywords ├─ └ ┘─┤ $T ONLY Modification keywords ├─

$D ONLY Display limiting keywords:

Chapter 1. JES2 Commands Summary 35

Page 46: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬────────────────────────────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬─────── ──────────────�└ ┘──,AUTH ──┬ ┬─────────────────── └ ┘──,COMPACT └ ┘──,ENDNODE └ ┘──,HOLD └ ┘──,LINE

│ │┌ ┐─,────────└ ┘──=( ───� ┴┬ ┬──Device )

├ ┤ ─ ─Job ───├ ┤ ─ ─Net ───

└ ┘──System

�─ ──┬ ┬────────── ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬────────────────────────────────── ──┬ ┬────────── ─────────�└ ┘──,LOGMODE └ ┘──,LOGON └ ┘──,NAME └ ┘──,Password ──┬ ┬─────────────────── └ ┘──,PATHMGR

│ │┌ ┐─,────────└ ┘──=( ───� ┴┬ ┬──SEND ── )

└ ┘──VERify

�─ ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬───────── ──┬ ┬───────── ───�└ ┘──,PENCRYPT └ ┘──,PRIVATE └ ┘──,RECeive └ ┘──,REST └ ┘──,SENTREST └ ┘──,STATUS └ ┘──,SUBnet

�─ ──┬ ┬──────── ──┬ ┬─────────── ───────────────────────────────────────────────────────────────────────┤└ ┘──,TRace └ ┘──,TRAnsmit

Selection limiting keywords:├─ ──┬ ┬─────────────────────────────────────────────────────── ──┬ ┬─────────────────────────── ────────� │ │┌ ┐─,──────────────────────────────── └ ┘──, ──┬ ┬─── COMPACT ──┬ ┬─=── nn └ ┘──, ──┬ ┬─── AUTH=( ───� ┴┬ ┬── ──┬ ┬─── Device ──┬ ┬─=── ──┬ ┬─No── ) └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ ├ ┤─>── ├ ┤── ──┬ ┬─── Job ──┬ ┬─=── ──┬ ┬─No── ─── └ ┘─<── │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ ├ ┤── ──┬ ┬─── Net ──┬ ┬─=── ──┬ ┬─No── ─── │ │└ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘── ──┬ ┬─── System ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─

�─ ──┬ ┬────────────────────────────────── ──┬ ┬──────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── ENDNODE ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ──┬ ┬─── HOLD ──┬ ┬─=── ──┬ ┬─JOBS─ └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘─/─ └ ┘─ê=─ └ ┘─NONE─

�─ ──┬ ┬────────────────────────── ──┬ ┬───────────────────────────────── ───────────────────────────────� └ ┘──, ──┬ ┬─── LINE ──┬ ┬─=── line └ ┘──, ──┬ ┬─── LOGMODE ──┬ ┬─=── avvvvvvv └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬──────────────────────────── ──┬ ┬────────────────────────────────── ────────────────────────────� └ ┘──, ──┬ ┬─── LOGON ──┬ ┬─=── logon └ ┘──, ──┬ ┬─── PATHMGR ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬────────────────────────────────── ─────────────────────� └ ┘──, ──┬ ┬─── PENCRYPT ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ──┬ ┬─── PRIVATE ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─

�─ ──┬ ┬───────────────────────────────────── ──┬ ┬────────────────────────── ───────────────────────────� └ ┘──, ──┬ ┬─── RECeive ──┬ ┬─=── ──┬ ┬─BOTH─── └ ┘──, ──┬ ┬─── REST ──┬ ┬─=── nnnn └ ┘─/─ └ ┘─ê=─ ├ ┤─JOBS─── └ ┘─/─ ├ ┤─ê=─ ├ ┤─NONE─── ├ ┤─>── └ ┘─SYSOUT─ └ ┘─<──

�─ ──┬ ┬────────────────────────────────────── ──┬ ┬──────────────────────────────── ────────────────────� └ ┘──, ──┬ ┬─── SENTREST ──┬ ┬─=── ──┬ ┬─ACCEPT─ └ ┘──, ──┬ ┬─── SUBnet ──┬ ┬─=── xxxxxxxx └ ┘─/─ └ ┘─ê=─ └ ┘─IGNORE─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬──────────────────────────────── ──┬ ┬────────────────────────────────────── ────────────────────┤ └ ┘──, ──┬ ┬─── TRace ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ──┬ ┬─── TRAnsmit ──┬ ┬─=── ──┬ ┬─BOTH─── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘─/─ └ ┘─ê=─ ├ ┤─JOBS─── ├ ┤─NONE─── └ ┘─SYSOUT─

$T ONLY Modification keywords:├─ ──┬ ┬────────────────────────────────── ──┬ ┬───────────── ──┬ ┬──────────────────── ───────────────────�

│ │┌ ┐─,────────────────── └ ┘──,COMPACT=nn └ ┘──,ENDNODE= ──┬ ┬─No──└ ┘──,AUTH=( ───� ┴┬ ┬──Device= ──┬ ┬─No── ) └ ┘─Yes─

│ │└ ┘─Yes─├ ┤──Job= ──┬ ┬─No── ───

│ │└ ┘─Yes─├ ┤──Net= ──┬ ┬─No── ───

│ │└ ┘─Yes─└ ┘──System= ──┬ ┬─No──

└ ┘─Yes─

36 OS/390 V2R10 JES2 Commands Summary

Page 47: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬────────────────── ──┬ ┬──────────── ──┬ ┬─────────────────── ──┬ ┬────────────── ───────────────────�└ ┘──,HOLD= ──┬ ┬─JOBS─ └ ┘──,LINE=nnnn └ ┘──,LOGMODE=avvvvvvv └ ┘──,LOGON=logon

└ ┘─NONE─

�─ ──┬ ┬──────────────── ──┬ ┬───────────────────────────────────── ──┬ ┬──────────────────── ─────────────�└ ┘──,NAME=xxxxxxxx │ │┌ ┐─,───────────────── └ ┘──,PATHMGR= ──┬ ┬─No──

└ ┘──,Password=( ───� ┴┬ ┬──SEND=xxxxxxxx ── ) └ ┘─Yes─└ ┘──VERify=xxxxxxxx

�─ ──┬ ┬───────────────────── ──┬ ┬──────────────────── ──┬ ┬─────────────────────── ──┬ ┬──────────── ──────�└ ┘──,PENCRYPT= ──┬ ┬─No── └ ┘──,PRIVATE= ──┬ ┬─No── └ ┘──,RECeive= ──┬ ┬─BOTH─── └ ┘──,REST=nnnn

└ ┘─Yes─ └ ┘─Yes─ ├ ┤─JOBS─── ├ ┤─NONE─── └ ┘─SYSOUT─

�─ ──┬ ┬──────────────────────── ──┬ ┬────────────────── ──┬ ┬────────────────── ──────────────────────────�└ ┘──,SENTREST= ──┬ ┬─ACCEPT─ └ ┘──,SUBnet=xxxxxxxx └ ┘──,TRace= ──┬ ┬─No──

└ ┘─IGNORE─ └ ┘─Yes─

�─ ──┬ ┬──────────────────────── ──────────────────────────────────────────────────────────────────────┤└ ┘──,TRAnsmit= ──┬ ┬─BOTH───

├ ┤─JOBS─── ├ ┤─NONE─── └ ┘─SYSOUT─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).

$D, $T ESTBYTE, ESTLNCT, ESTPAGE, ESTPUN, ESTIME

��─ ──┬ ┬─$D─ ──┬ ┬─ESTBYTE─ ──┬ ┬───────────────────── ──┬ ┬───────────────────── ─────────────────────────�! └ ┘─$T─ ├ ┤─ESTLNCT─ └ ┘─┤ $D Options Only ├─ └ ┘─┤ $T Options Only ├─ ├ ┤─ESTPAGE─ ├ ┤─ESTPUN── └ ┘─ESTIME──

$D Options Only:├─ ──┬ ┬────── ──┬ ┬────── ──┬ ┬────── ────────────────────────────────────────────────────────────────────┤ └ ┘ ─,INT─ └ ┘ ─,NUM─ └ ┘ ─,OPT─

$T Options Only:├─ ──┬ ┬──────────── ──┬ ┬──────────── ──┬ ┬─────────────────── ───────────────────────────────────────────┤ └ ┘ ─,INT=nnnnn─ └ ┘ ─,NUM=nnnnn─ ├ ┤ ─,OPT=────(1) ──┬ ┬─No── │ │└ ┘─Yes─ └ ┘ ─,OPT=────(2) ──┬ ┬─1─ ── ├ ┤─2─ └ ┘─3─

Notes:1 Use for only $T ESTIME.2 Use for all except $T ESTIME.

$D, $T JOBPRTY

��─ ──┬ ┬─$D─ ─┤ Numeric ├────(1) ─── ──JOBPRTY─ ──┬ ┬───────────────────── ──┬ ┬───────────────────── ─────────�! └ ┘─$T─ └ ┘─┤ $D Options Only ├─ └ ┘─┤ $T Options Only ├─

$D Options Only:├─ ──┬ ┬─────────── ──┬ ┬─────── ────────────────────────────────────────────────────────────────────────┤ └ ┘ ─,PRIORITY─ └ ┘ ─,TIME─

$T Options Only:├─ ──┬ ┬────────────── ──┬ ┬───────────── ───────────────────────────────────────────────────────────────┤ └ ┘ ─,PRIORITY=nn─ └ ┘ ─,TIME=nnnnn─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).

Chapter 1. JES2 Commands Summary 37

Page 48: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$T ,$D EXITS

��─ ──┬ ┬─$T─ ──EXIT─┤ Numeric ├────(1) ──┬ ┬────────────────────────────────────────── ─────────────────────� └ ┘─$D─ └ ┘───┤ Common Selection limiting keywords ├─

�─ ──┬ ┬───────────────────────────────────── ──┬ ┬───────────────────────────────────────────── ────────�└ ┘───┤ $T Only Modification keywords ├─ └ ┘───┤ ($D Only) Selection limiting keywords ├─

�─ ──┬ ┬─────────────────────────────────────────── ──────────────────────────────────────────────────�!└ ┘───┤ ($D Only) Display Limiting Keywords ├─

$T Only Modification keywords:├─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬──────────────────────── ──┬ ┬────────────────── ─────────────────────┤

└ ┘──,DISABLE └ ┘──,ENABLE └ ┘──,STATUS= ──┬ ┬─DISABLED─ └ ┘──,TRace= ──┬ ┬─No── └ ┘─ENABLED── └ ┘─Yes─

Common Selection limiting keywords:├─ ──┬ ┬──────────────────────────────────────── ──┬ ┬──────────────────────────────── ──────────────────┤ └ ┘──, ──┬ ┬─── STATUS ──┬ ┬─=── ──┬ ┬─DISABLED─── └ ┘──, ──┬ ┬─── TRace ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─ê=─ ├ ┤─ENABLED──── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─ └ ┘─ENTERED────(2)

($D Only) Display Limiting Keywords:├─ ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬──────── ──┬ ┬─────────── ───────────────┤ └ ┘─,ENViron─ └ ┘─,ROUtines─ └ ┘─,SPLEVEL─ └ ┘─,STATUS─ └ ┘─,Trace─ └ ┘─,USECOUNT─

($D Only) Selection Limiting Keywords:├─ ──┬ ┬────────────────────────────────────── ──┬ ┬────────────────────────────────────── ──────────────┤ └ ┘──, ──┬ ┬─── ENViron ──┬ ┬─=── ──┬ ┬─FSS───── └ ┘──, ──┬ ┬─── SPLEVEL ──┬ ┬─=── ──┬ ┬─CHECK─── └ ┘─/─ └ ┘─ê=─ ├ ┤─JES2──── └ ┘─/─ └ ┘─ê=─ └ ┘─NOCHECK─ ├ ┤─MIXED─── ├ ┤─SUBTASK─ └ ┘─USER────

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).2 $D only.

$D, $T SPOOLDEF

��─ ──┬ ┬─$D─ ──SPOOLDEF ──┬ ┬──────────────────────── ──┬ ┬──────────────────────── ──────────────────────�! └ ┘─$T─ └ ┘─┤ $D Only Parameters ├─ └ ┘─┤ $T Only Parameters ├─

$D Only Parameters:├─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬──────────────────────────────────────────────────── ───────────────�

| └ ┘──,BUFSIZE └ ┘──,DSNAME └ ┘──,FENCE=( ──┬ ┬───────────────────────────────────── )| └ ┘| ──Active= ──┬ ┬─Yes─ ──┬ ┬───────────────| └ ┘─No── └ ┘──VOLUMES=| ─nnn─

�─ ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬───────── ──┬ ┬────────────────────────────────── ──┬ ┬────────── ───�└ ┘──,LASTSVAL └ ┘──,SPOOLNUM └ ┘──,TGSIZE └ ┘──,TGSPACE ──┬ ┬──────────────────── └ ┘──,TRKCELL

│ │┌ ┐─,─────────└ ┘──=( ───� ┴┬ ┬──ACTIVE ─ )

├ ┤──DEFINED ├ ┤──FREE ─── ├ ┤──MAX ──── ├ ┤──PERCENT └ ┘──WARN ───

�─ ──┬ ┬───────── ─────────────────────────────────────────────────────────────────────────────────────┤└ ┘──,Volume

$T Only Parameters:├─ ──┬ ┬──────────────────────────────────────────────────── ──┬ ┬─────────────── ──┬ ┬────────────── ─────�

| └ ┘──,FENCE=( ──┬ ┬───────────────────────────────────── ) └ ┘──,SPOOLNUM=nnn └ ┘──,TGSIZE=nnnn| └ ┘| ──Active= ──┬ ┬─Yes─ ──┬ ┬───────────────| └ ┘─No── └ ┘──VOLUMES=| ─nnn─

�─ ──┬ ┬─────────────────────────────────────── ───────────────────────────────────────────────────────┤└ ┘──,TGSPACE ──┬ ┬─────────────────────────

│ │┌ ┐─,──────────────└ ┘──=( ───� ┴┬ ┬──MAX=nnnnnnnn )

└ ┘──WARN=nnn ────

38 OS/390 V2R10 JES2 Commands Summary

Page 49: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$D, $E, $T MEMBER

��─ ──┬ ┬─$D─ ──MEMBer─┤ Identifier ├────(1) ──┬ ┬───────────────────────────────────── ─────────────────────� ├ ┤─$E─ └ ┘───┤ $D, $E, $T Selection keywords ├─ └ ┘─$T─

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────────────────── ─────────────�! └ ┘─┤ $T Only Modification Keywords ├─ └ ┘───┤ $D Only Display limiting keywords ├─

$D, $E, $T Selection keywords:├─ ──┬ ┬────────────────────────────── ──┬ ┬─────────────────────────────────────────────── ─────────────� └ ┘──, ──┬ ┬─── SLEVEL ──┬ ┬─=── slevel └ ┘──, ──┬ ┬─── STATUS ──┬ ┬─=── ──┬ ┬─ACTIVE──────────── └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ └ ┘─ê=─ ├ ┤─DEFINED─────────── ├ ┤─>── ├ ┤─DORMANT─────────── └ ┘─<── ├ ┤─DOWN────────────── ├ ┤─DRAINED─────────── ├ ┤─FAILED──────────── ├ ┤─INITIALIZING────── ├ ┤─INUSE───────────── ├ ┤─JESXCF-FAILED───── ├ ┤─JES2-FAILED─────── ├ ┤─MVS-GONE────────── ├ ┤─TERMINATED──────── ├ ┤─TERMINATING─────── ├ ┤─UNDEFINED───────── └ ┘─UNDEFINED-PENDING─

�─ ──┬ ┬──────────────────────────────── ──┬ ┬──────────────────────────────── ──────────────────────────┤ └ ┘──, ──┬ ┬─── SYSNAME ──┬ ┬─=── sysname └ ┘──, ──┬ ┬─── VERSION ──┬ ┬─=── version └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

$T Only Modification Keywords:├─ ──┬ ┬────────────────────────────── ────────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── IND ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─

$D Only Display limiting keywords:├─ ──┬ ┬─────── ──┬ ┬────────── ──┬ ┬────── ──┬ ┬─────────────────────────────────── ──┬ ┬─────── ─────────────�

└ ┘──,BOSS └ ┘──,COMMAND └ ┘──,IND └ ┘──,LASTART ──┬ ┬───────────────────── └ ┘──,NAME │ │┌ ┐─,──────────

└ ┘──=( ───� ┴┬ ┬──STARTIME ) └ ┘──STARTYPE

�─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬────────── ──────┤└ ┘──,RESETBY └ ┘──,SLEVEL └ ┘──,SSNAME └ ┘──,STATUS └ ┘──,SYSNAME └ ┘──,TIME └ ┘──,VERSION

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).

$D Transmitter/Receivers

��─ ─$D L─ ──┬ ┬──────────────── ──┬ ┬ ─.JR─ ──┬ ┬──────────────── ──┬ ┬─────────────────── ──┬ ┬─────────── ───�! └ ┘─┤ Numeric ├────(1) │ │└ ┘─┤ Numeric ├────(1) └ ┘─┤ .JR Selection ├─ └ ┘─┤ UNIT= ├─ ├ ┤ ─.JT─ ──┬ ┬──────────────── ──┬ ┬─────────────────── │ │└ ┘─┤ Numeric ├────(1) └ ┘─┤ .JT Selection ├─ ├ ┤ ─.SR─ ──┬ ┬──────────────── ──┬ ┬─────────────────── │ │└ ┘─┤ Numeric ├────(1) └ ┘─┤ .SR Selection ├─ └ ┘ ─.ST─ ──┬ ┬──────────────── ──┬ ┬─────────────────── └ ┘─┤ Numeric ├────(1) └ ┘─┤ .ST Selection ├─

.JR Selection:├─ ──┬ ┬─────── ──┬ ┬─────── ──┬ ┬─────────── ─────────────────────────────────────────────────────────────┤

└ ┘─,HOLD─ └ ┘─,UNIT─ └ ┘─┤ HOLD= ├─

.JT Selection:├─ ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬───── ──────────────────────────────────────────────────────────────────┤ └ ┘─,LIMit─ └ ┘─,UNIT─ └ ┘─,WS─

.SR Selection:├─ ──┬ ┬─────── ───────────────────────────────────────────────────────────────────────────────────────┤ └ ┘─,UNIT─

.ST Selection:

Chapter 1. JES2 Commands Summary 39

Page 50: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬───── ──┬ ┬────────── ──┬ ┬─────── ─────────────────────────────────────────┤ └ ┘─,LIMit─ └ ┘─,UNIT─ └ ┘─,WS─ └ ┘─,OUTDisp─ └ ┘─,PLIM─

UNIT=:├─ ──┬ ┬──────────────────────────── ──────────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── UNIT ──┬ ┬─=── ─unit─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── └ ┘─<──

HOLD=:├─ ──┬ ┬─────────────────────────────── ───────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── HOLD ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─ê=─ └ ┘─Yes─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$G Commands

��─ ──$G ──┬ ┬─A─ ──┬ ┬─Nnnnn── ──────────────────────────────────────────────────────────────────────────� ├ ┤─C─ ├ ┤─name─── ├ ┤─D─ └ ┘─destid─ ├ ┤─H─ └ ┘─R─

�─ ─,──'jobname'─ ──┬ ┬───────────────────────────────── ──┬ ┬──────────────────────────────── ───────────�└ ┘─┤ $GR OUT or XEQ Options Only ├─ └ ┘ ─,D=─ ──┬ ┬──┬ ┬─LOCAL──── ─────────

│ │└ ┘─ANYLOCAL─ ├ ┤──┬ ┬─Nnnnn──── ───────── │ │└ ┘─nodename─ └ ┘──┬ ┬─destid──────────── ├ ┤─Nnnnn.Rmmmm─────── ├ ┤─Ummmm───────────── ├ ┤ ─node─ ──┬ ┬─.remote─ │ │└ ┘─.destid─ └ ┘─remote────────────

�─ ──┬ ┬───────────────────── ──┬ ┬────────────────────── ──────────────────────────────────────────────�!└ ┘─┤ General Options ├─ ├ ┤─┤ $GC Options Only ├─

└ ┘─┤ $GD Options Only ├─

$GC Options Only:├─ ──┬ ┬─────── ──┬ ┬──────── ───────────────────────────────────────────────────────────────────────────┤ └ ┘─,Dump─ └ ┘─,Purge─

$GD Options Only:├─ ──┬ ┬─────────── ───────────────────────────────────────────────────────────────────────────────────┤ └ ┘─┤ L= ├────(1)

General Options:├─ ──┬ ┬─────────── ──┬ ┬─────────────────────── ────────────────────────────────────────────────────────┤ ├ ┤──┬ ┬─,J──── └ ┘ ─,O=─ ──┬ ┬──┬ ┬─LOCAL──── │ │└ ┘─,JOBn─ │ │└ ┘─ANYLOCAL─ ├ ┤──┬ ┬─,S──── ├ ┤──┬ ┬─Nnnnn──── │ │└ ┘─,STCn─ │ │└ ┘─nodename─ └ ┘──┬ ┬─,T──── └ ┘─── ──destid─ ── └ ┘─,TSUn─

$GR OUT or XEQ Options Only:├─ ──┬ ┬────── ────────────────────────────────────────────────────────────────────────────────────────┤ ├ ┤─,OUT─ └ ┘─,XEQ─

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

40 OS/390 V2R10 JES2 Commands Summary

Page 51: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$D M - Send Command

��─ ─── ──$D M─ ──┬ ┬──┬ ┬─JOBnnnnn─ ── ──┬ ┬ ─Rnnnn─ ──┬ ┬─────── ────────── ─,D=──┤ Destination ├────(1) ──────────� │ │├ ┤─STCnnnnn─ │ │├ ┤─-nnnn─ │ │└ ┘─TSUnnnnn─ │ │└ ┘─-R──── └ ┘──┬ ┬─'JOBnnnnn'─ ├ ┤ ─Nnnnn─ ──┬ ┬─────── ────────── ├ ┤─'STCnnnnn'─ │ │├ ┤─-nnnn─ └ ┘─'TSUnnnnn'─ │ │└ ┘─-R──── ├ ┤ ─Mn─ ──┬ ┬──── ──────────────── │ │├ ┤─-n─ │ │└ ┘─-R─ ├ ┤ ─NnnnnMnRnnnn─ ──┬ ┬──── ────── │ │├ ┤─-n─ │ │└ ┘─-R─ └ ┘ ─NnnnnRnnnnRnnnn─ ──┬ ┬─────── ├ ┤─-nnnn─ └ ┘─-R────

�──,R=──┤ Destination ├────(1) ──┬ ┬─────────── ─,─ ──┬ ┬─'command'─ ───────────────────────────────────────�! └ ┘─┤ L= ├────(1) ├ ┤─'message'─ └ ┘─message───

Note:1 See“JES2 Commands Common Syntax Elements” on page 6 .

$S, $Z (A, I, Job, N, SPOOL, XEQ), $P JES2, $T I, $D I

��─ ─── ───┬ ┬ ─$P─────────────────────────────────────────────────────────── ───────────────────────────� ├ ┤ ─$P JES2─ ──┬ ┬─────────────────────────── ────────────────────── │ │└ ┘─┤ $P JES2 Only Keywords ├─ ├ ┤ ─$P─ ──┬ ┬─SPOOL─ ──┬ ┬─────────────────────── ──────────────────── │ │└ ┘─SPL─── └ ┘─┤ $P SPOOL Keywords ├─ ├ ┤ ─$S─ ──┬ ┬────────────────────── ──┬ ┬──────────────────────────── │ │└ ┘─┤ $S Only Keywords ├─ └ ┘─┤ $S, $Z Common Keywords ├─ ├ ┤ ─$Z─ ──┬ ┬──────────────────────────── ────────────────────────── │ │└ ┘─┤ $S, $Z Common Keywords ├─ └ ┘ ──┬ ┬─$T─ ──┬ ┬─I──── ─┤ Identifier ├────(1) ─┤ Initiator Parms ├───── └ ┘─$D─ └ ┘─Init─

�─ ──┬ ┬───────────────────────────────────────── ──┬ ┬─────────────────────────────────────── ─────────�! └ ┘─┤ $D Only Selection Limiting Keywords ├─ └ ┘─┤ $D Only Display Limiting Keywrods ├─

$S Only Keyword:├─ ──┬ ┬──────────────────────────────────────────────────────── ──────────────────────────────────────┤ └ ┘ ──┬ ┬─Job──┤ Jobid ├───────────────────────────────────── ├ ┤ ─N─ ──┬ ┬─────────── ──┬ ┬───────────── ──┬ ┬───────────── │ │└ ┘─,LINEnnnn─ └ ┘─,N=nodename─ ├ ┤─,P=password─ │ │└ ┘─,A=applname─ └ ┘ ─XEQ────────────────────────────────────────────────

$S, $Z Common Keywords:├─ ──┬ ┬────────────────────────────────────────────────────────── ────────────────────────────────────┤ └ ┘── ──┬ ┬ ─A,ALL────────────────────────────────────────────── └ ┘ ─SPOOL─ ──┬ ┬──────────────────────── ─┤ SPOOL Parms ├─ ├ ┤──volser ────────────────

├ ┤──'volser' ────────────── └ ┘──( ─── ─── ──┬ ┬─volser─── ) ├ ┤─�────────

└ ┘──'volser'

$P SPOOL Keywords:├──┤ identifier ├─ ──┬ ┬───────── ──┬ ┬────────────────────────────── ───────────────────────────────────┤ └ ┘ ─,Cancel─ └ ┘──, ──┬ ┬─── Volume ──┬ ┬─=── volume └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

$P JES2 Only Keywords:├─ ──┬ ┬──────────────────── ──┬ ┬──────── ──┬ ┬─────── ───────────────────────────────────────────────────┤ └ ┘ ─,ABEND─ ──┬ ┬──────── └ ┘─,QUICK─ └ ┘─,TERM─ └ ┘─,FORCE─

$D ONLY Selection Limiting Keywords:

Chapter 1. JES2 Commands Summary 41

Page 52: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬────────────────────────────────── ──┬ ┬───────────────────── ──┬ ┬──────────────────────────── ───� └ ┘──, ──┬ ┬─── ACTCLASS ──┬ ┬─=── actclass └ ┘─┤ Initiator Parms ├─ └ ┘──, ──┬ ┬─── Class ──┬ ┬─=── class └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬──────────────────────────── ──┬ ┬──────────────────────────────── ──────────────────────────────� └ ┘──, ──┬ ┬─── JOBID ──┬ ┬─=── jobid └ ┘──, ──┬ ┬─── JOBNAME ──┬ ┬─=── jobname └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬────────────────────────── ────────────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── NAME ──┬ ┬─=── name └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

$D Only Dsiplay Limiting Keywords:├─ ──┬ ┬─────────── ──┬ ┬─────── ──┬ ┬──────── ──┬ ┬─────────────────── ──┬ ┬──────── ──┬ ┬────────── ───────────�

└ ┘──,ACTCLASS └ ┘──,ASID └ ┘──,Class └ ┘──,INELigible_class └ ┘──,JOBID └ ┘──,JOBNAME

�─ ──┬ ┬─────── ──┬ ┬─────── ──┬ ┬───────── ──┬ ┬────── ─────────────────────────────────────────────────────┤└ ┘──,Long └ ┘──,NAME └ ┘──,STATUS └ ┘──,STC

Initiator Parms:├─ ──┬ ┬────────────────────────── ──┬ ┬──────────────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── ASID ──┬ ┬─=── asid └ ┘──, ──┬ ┬─── STATUS ──┬ ┬─=── ──┬ ┬─ACTIVE───── └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ ├ ┤─DRAINED──── ├ ┤─>── ├ ┤─DRAINING─── └ ┘─<── ├ ┤─HALTED───── ├ ┤─HALTING──── ├ ┤─INACTIVE─── ├ ┤─RESTARTING─ └ ┘─STARTING───

�─ ──┬ ┬──────────────────────── ──────────────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── STC ──┬ ┬─=── stc └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

Jobid:├─ ──┬ ┬──────────────────── ──────────────────────────────────────────────────────────────────────────┤ ├ ┤──nn ────────────────

├ ┤──'job' ───────────── │ │┌ ┐─,────────── └ ┘──( ───� ┴┬ ┬── ─── ──nn─ ) ├ ┤─job──────

└ ┘──'job' ───

SPOOL Parms:├─ ──┬ ┬───────── ──┬ ┬──────────── ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────────── ───────────────────────────┤

| └ ┘| ─,Cancel─ └ ┘| ──┬ ┬─,Drain─ └ ┘| ─,Format─ └ ┘──,SYSAFF= └ ┘| ──┬ ┬─,HALT─ └ ┘─,P───── └ ┘─,Z────

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D, $S,

$Z).

$S, $P Line, Logon, RMT, Trace

��─ ──┬ ┬ ─$S─ ──┬ ┬──┬ ┬ ─LINE─ ───── ──┬ ┬──────────────── ─────────────────────────────────────────────────�! └ ┘ ─$P─ │ │└ ┘ ─LNE── └ ┘─┤ Numeric ├────(1)

└ ┘──┬ ┬──┬ ┬ ─LGN─── │ │└ ┘ ─LOGON─ ├ ┤ ─RMT─────── └ ┘ ─TRace─────

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

42 OS/390 V2R10 JES2 Commands Summary

Page 53: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$T Transmitter/Receivers

��─ ─$T L──┤ Numeric ├────(1) ──┬ ┬─.JT──┤ Numeric ├────(1) ─────────────────────── ───────────────────────────� └ ┘─.ST──┤ Numeric ├────(1) ──┬ ┬───────────────────

└ ┘─┤ .ST Selection ├─

�─ ──┬ ┬───────────────────────── ──┬ ┬────── ──┬ ┬─ws─────────── ────────────────────────────────────────�! └ ┘ ─,LIMit=──┤ Numeric ├────(1) └ ┘─,WS=─ │ │┌ ┐─,── └ ┘ ─(─ ───� ┴─ws─ ─)─

.ST Selection:├─ ──┬ ┬───────────────────────────────────── ──┬ ┬──────────────────────── ─────────────────────────────┤ └ ┘─,OUTDisp=──(─ ──┬ ┬──┬ ┬─H───── ───── ─)─ └ ┘─,PLIM=──┤ Numeric ├────(1)

│ │├ ┤─HOLD── │ │├ ┤─K───── │ │├ ┤─KEEP── │ │├ ┤─L───── │ │├ ┤─LEAVE─ │ │├ ┤─W───── │ │└ ┘─WRITE─ │ │┌ ┐─,────────── └ ┘───� ┴┬ ┬─H──────── ├ ┤─HOLD───── ├ ┤─K──────── ├ ┤─KEEP───── ├ ┤─L──────── ├ ┤─LEAVE──── ├ ┤─W──────── └ ┘─WRITE────(2)

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 OUTDisp can be coded up to 4 times.

$T, $S, $Z, $P OFFLOAD(n)

��─ ──┬ ┬─$T─ ──OFFLOAD─┤ Numeric ├────(1) ──┬ ┬──────────────────────── ────────────────────────────────────� ├ ┤─$S─ └ ┘─┤ $S Only Parameters ├─ ├ ┤─$Z─ └ ┘─$P─

�─ ──┬ ┬─────────────────────────────────────────── ──┬ ┬───────────────────────────────────── ─────────�!└ ┘───┤ $T Only Selection limiting keywords ├─ └ ┘───┤ $T Only Modification keywords ├─

$T Only Modification keywords:├─ ──┬ ┬──────────────────── ──┬ ┬───────────── ──┬ ┬────────────────── ──┬ ┬──────────────────── ───────────�

└ ┘──,ARCHIVE= ──┬ ┬─ALL─ └ ┘──,DSN=dsname └ ┘──,LABEL= ──┬ ┬─AL── └ ┘──,PROTECT= ──┬ ┬─No── └ ┘─ONE─ ├ ┤─AUL─ └ ┘─Yes─ ├ ┤─BLP─ ├ ┤─NL── ├ ┤─NSL─ ├ ┤─SL── └ ┘─SUL─

�─ ──┬ ┬───────────── ──┬ ┬─────────────────────────────────────── ──┬ ┬───────────────────── ─────────────�└ ┘──,RETPD=nnnn └ ┘──,UNIT= ──┬ ┬── ──┬ ┬─devnum─── ─────────── └ ┘──,VALIDATE= ──┬ ┬─No──

│ │├ ┤─/devnum── └ ┘─Yes─ │ │├ ┤─nnnn───── │ │├ ┤─cccccccc─ │ │└ ┘──┬ ┬───── ─ │ │└ ┘─,nn─ └ ┘──( ──┬ ┬─devnum─── ──┬ ┬───── )

├ ┤─/devnum── └ ┘──,nn ├ ┤─nnnn───── ├ ┤─cccccccc─ └ ┘──┬ ┬───── ─ └ ┘─,nn─

�─ ──┬ ┬──────────── ──────────────────────────────────────────────────────────────────────────────────┤└ ┘──,VOLS=vols

$T Only Selection limiting keywords:

Chapter 1. JES2 Commands Summary 43

Page 54: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬─────────────────────────── ──┬ ┬──────────────────────────────── ───────────────────────────────� └ ┘──, ─── ──/─ DSN ──┬ ┬─=── dsname └ ┘──, ─── ──/─ LABEL ──┬ ┬─=── ──┬ ┬─AL── ├ ┤─ê=─ └ ┘─ê=─ ├ ┤─AUL─ ├ ┤─>── ├ ┤─BLP─ └ ┘─<── ├ ┤─NL── ├ ┤─NSL─ ├ ┤─SL── └ ┘─SUL─

�─ ──┬ ┬────────────────────────────────── ──┬ ┬─────────────────────────── ─────────────────────────────� └ ┘──, ─── ──/─ PROTECT ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ─── ──/─ RETPD ──┬ ┬─=── nnnn └ ┘─ê=─ └ ┘─Yes─ ├ ┤─ê=─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬────────────────────────── ─────────────────────────────┤ └ ┘──, ─── ──/─ VALIDATE ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ─── ──/─ VOLS ──┬ ┬─=── vols └ ┘─ê=─ └ ┘─Yes─ ├ ┤─ê=─ ├ ┤─>── └ ┘─<──

$S Only Parameters:├─ ─,TYPE=─ ──┬ ┬─TRANSMIT─ ────────────────────────────────────────────────────────────────────────────┤ └ ┘─RECEIVE──

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$T, $D OFF(n).JR, OFF(n).JT, OFF(n).SR, OFF(n).ST

��─ ──┬ ┬─$T─ ─OFF──┤ Numeric ├────(1) ──┬ ┬─.JR─ ──┬ ┬───────────────────────────────────────── ──────────────� └ ┘─$D─ ├ ┤─.JT─ └ ┘───┤ $D Only Display limiting keywords ├─ ├ ┤─.SR─ └ ┘─.ST─

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────────────── ─────────────────�!└ ┘───┤ Selection limiting keywords ├─ └ ┘───┤ $T Only Modification keywords ├─

$T Only Modification keywords:├─ ──┬ ┬────────────── ──┬ ┬────────────────── ──┬ ┬───────────────── ──┬ ┬────────────────── ───────────────�

└ ┘──,CLass=class └ ┘──,CReator=creator └ ┘──,Hold= ──┬ ┬───── └ ┘──,JOBname=jobname ├ ┤─No── └ ┘─Yes─

�─ ──┬ ┬────────────────────────────────── ──┬ ┬─────────────────── ─────────────────────────────────────�│ │┌ ┐─,─────────────────── └ ┘──,NOTify= ──┬ ┬─No──└ ┘──,MOD=( ───� ┴┬ ┬──CLass=class ────── ) └ ┘─Yes─

├ ┤──Hold= ──┬ ┬───── ─── │ │├ ┤─No── │ │└ ┘─Yes─

├ ┤──Routecde=routecde└ ┘──SYSaff=sysaff ────

�─ ──┬ ┬─────────────────────────────── ──┬ ┬──────────────────────────────────── ───────────────────────�└ ┘──,RANGE= ──┬ ┬──low ───────────── └ ┘──,Routecde= ──┬ ┬──routecde ──────────

└ ┘──(low ──┬ ┬─────── ) │ │┌ ┐─,──────────└ ┘──,high └ ┘──( ───� ┴┬ ┬────────── )

└ ┘──routecde

�─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────── ──────────────────────────────────┤└ ┘──,SYSaff= ──┬ ┬──sysaff ───────────── └ ┘──,WS= ──┬ ┬──ws ───────

│ │┌ ┐─,──────── │ │┌ ┐─,─ └ ┘──( ───(2) ───� ┴┬ ┬──────── ) └ ┘──( ───� ┴─ws ) └ ┘──sysaff

Selection limiting keywords:├─ ──┬ ┬──────────────────────────── ──┬ ┬─────────────────────────────── ───────────────────────────────� └ ┘──, ─── ──/─ CLass ──┬ ┬─=── class └ ┘──, ─── ──/─ Hold ──┬ ┬─=── ──┬ ┬───── ├ ┤─ê=─ └ ┘─ê=─ ├ ┤─No── ├ ┤─>── └ ┘─Yes─ └ ┘─<──

44 OS/390 V2R10 JES2 Commands Summary

Page 55: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬──────────────────────────────── ──┬ ┬──────────────────────────────────────────────────── ──────� └ ┘──, ─── ──/─ JOBname ──┬ ┬─=── jobname │ │┌ ┐─,────────────────────────────── ├ ┤─ê=─ └ ┘──, ──┬ ┬─── MOD=( ───� ┴┬ ┬── ─── ──/─ CLass ──┬ ┬─=── class ─── ) ├ ┤─>── └ ┘─/─ │ │├ ┤─ê=─

└ ┘─<── │ │├ ┤─>── │ │└ ┘─<── ├ ┤── ─── ──/─ Hold ──┬ ┬─=── ──┬ ┬───── │ │└ ┘─ê=─ ├ ┤─No── │ │└ ┘─Yes─ └ ┘── ─── ──/─ SYSaff ──┬ ┬─=── sysaff ─ └ ┘─ê=─

�─ ──┬ ┬───────────────────────────────── ─────────────────────────────────────────────────────────────┤ └ ┘──, ─── ──/─ NOTify ──┬ ┬─=── ──┬ ┬─No── └ ┘─ê=─ └ ┘─Yes─

$D Only Display limiting keywords:├─ ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬────────── ──┬ ┬───────────────────────── ──┬ ┬───────── ─────�

└ ┘──,CLass └ ┘──,CReator └ ┘──,Hold └ ┘──,JOBname │ │┌ ┐─,────────── └ ┘──,NOTify└ ┘──,MOD=( ───� ┴┬ ┬──CLass ─── )

├ ┤ ─ ─Hold ──── ├ ┤──Routecde └ ┘──SYSaff ──

�─ ──┬ ┬──────── ──┬ ┬─────────── ──┬ ┬──────── ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬───── ────────────────────────┤└ ┘──,RANGE └ ┘──,Routecde └ ┘ ─,START─ └ ┘ ─,STATUS─ └ ┘─,SYSaff─ └ ┘──,WS

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).2 sysaff can be coded up to 32 times.

$D LOADMOD(jxxxxxxx) - Display Load Module Information

��─ ──$D ──LOADmod ──┬ ┬────────────── ──┬ ┬─────────────────────────────────── ───────────────────────────� └ ┘─┤ Value ├────(1) └ ┘───┤ Selection limiting keywords ├─

�─ ──┬ ┬───────────────────────────────── ────────────────────────────────────────────────────────────�!└ ┘───┤ Display limiting keywords ├─

Display limiting keywords:├─ ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬──────── ──┬ ┬─────────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬───────── ───┤

└ ┘──,ADDRess └ ┘──,LENgth └ ┘──,RMODE └ ┘──,ROUtines └ ┘──,SPLevel └ ┘──,STORage └ ┘──,TABLES

Selection limiting keywords:├─ ──┬ ┬──────────────────────────────── ──┬ ┬────────────────────────────── ────────────────────────────� └ ┘──, ──┬ ┬─── ADDRess ──┬ ┬─=── address └ ┘──, ──┬ ┬─── LENgth ──┬ ┬─=── length └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬──────────────────────────────── ──┬ ┬────────────────────────────────────── ────────────────────� └ ┘──, ──┬ ┬─── RMODE ──┬ ┬─=── ──┬ ┬─ANY─ └ ┘──, ──┬ ┬─── SPLevel ──┬ ┬─=── ──┬ ┬─CHECK─── └ ┘─/─ └ ┘─¬=─ └ ┘─24── └ ┘─/─ └ ┘─¬=─ └ ┘─NOCHECK─

�─ ──┬ ┬────────────────────────────────────── ────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── STORage ──┬ ┬─=── ──┬ ┬─CSA───── └ ┘─/─ └ ┘─¬=─ ├ ┤─LPA───── ├ ┤─PRIVATE─ └ ┘─PVT─────

Note:1 See “JES2 Commands Common Syntax Elements” on page 6.

$D N - Display Job Queue Information

Chapter 1. JES2 Commands Summary 45

Page 56: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

��─ ─$D─ ─N─ ──┬ ┬────────── ──┬ ┬─────────── ─,Q=─ ──┬ ┬─CNV─ ──┬ ┬─class─── ───── ────────────────────────────�!├ ┤─,IND───── └ ┘──,V=volser │ │├ ┤──┬ ┬─STC─├ ┤─,memname─ │ ││ │└ ┘─$───├ ┤─,ANY───── │ │├ ┤──┬ ┬─TSU─├ ┤─,ALL───── │ ││ │└ ┘─@───└ ┘─,IND───── │ │└ ┘ ─�───────

├ ┤ ─XEQ─ ──┬ ┬─class─── ───── │ │├ ┤──┬ ┬─STC─ │ ││ │└ ┘─$─── │ │├ ┤──┬ ┬─TSU─ │ ││ │└ ┘─@─── │ │└ ┘ ─�─────── ├ ┤─OUT─────────────────── ├ ┤─PPU─────────────────── ├ ┤─HOLD────────────────── └ ┘ ─XMT─ ──┬ ┬──┬ ┬─LOCAL──── │ │└ ┘─ANYLOCAL─ ├ ┤──┬ ┬─N──nnnn── │ │└ ┘─nodename─ └ ┘ ─destid───────

$D, $T OUTPRTY - Display/Specify Job Output Priority

��─ ──┬ ┬─$D─ ──OUTPRTY─┤ Numeric ├────(1) ──┬ ┬─────────────────────────────────── ─────────────────────────� └ ┘─$T─ └ ┘───┤ Selection limiting keywords ├─

�─ ──┬ ┬───────────────────────────────────────── ──┬ ┬───────────────────────────────────── ───────────�!└ ┘───┤ $D Only Display limiting keywords ├─ └ ┘───┤ $T Only Modification keywords ├─

$D Only Display limiting keywords:├─ ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬───────── ───────────────────────────────────────────────────────────┤

└ ┘──,PAGE └ ┘──,PRIORITY └ ┘──,RECORD

Selection limiting keywords:├─ ──┬ ┬────────────────────────── ──┬ ┬────────────────────────────── ──────────────────────────────────┤ └ ┘──, ──┬ ┬─── PAGE ──┬ ┬─=── page └ ┘──, ──┬ ┬─── RECORD ──┬ ┬─=── record └ ┘─/─ ├ ┤─ê=─ └ ┘─/─ ├ ┤─ê=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

$T Only Modification keywords:├─ ──┬ ┬──────────── ──┬ ┬──────────────────── ──┬ ┬──────────────── ──────────────────────────────────────┤

└ ┘──,PAGE=page └ ┘──,PRIORITY=priority └ ┘──,RECORD=record

Note:1 See “JES2 Commands Common Syntax Elements” on page 6 (optional for $D).

$ Job Output Commands

��─ ─── ─ ──┬ ┬─$CO─ ──┬ ┬─Job── ──┬ ┬─────────────────── ───────────────────────────────────────────────────� ├ ┤─$DO─ ├ ┤─JOBQ─ └ ┘─┤ Identifier ├────(1)

├ ┤─$L── ├ ┤─JQ─── ├ ┤─$PO─ ├ ┤─Stc── └ ┘─$TO─ └ ┘─Tsu──

�─ ──┬ ┬────────────────────────────────────────────────────────────────────────────────────── ───────�! ├ ┤──┬ ┬──────────────────────────────────────────────────────────────────────────────── ── │ │└ ┘─┤ $L Only Display Limiting Keywords ├──┤ $L Only Selection Limiting Keywords ├─ ├ ┤──┬ ┬──────────────────────────── ────────────────────────────────────────────────────── │ │└ ┘─┤ $CO, $PO ONLY Keywords ├─ ├ ┤──┬ ┬────────────────────────────────────────────────────────────────────────────────── │ │└ ┘─┤ $DO ONLY Display Limiting Keywords ├──┤ $DO ONLY Selection Limiting Keywords ├─ └ ┘──┬ ┬────────────────────────────────────────────────────────────────────────────── ──── └ ┘─┤ $TO ONLY Modification Keywords ├──┤ $TO ONLY Selection Limiting Keywords ├─

$L Only Display Limiting Keywords:├─ ── ──┬ ┬─── CMDauth ──┬ ┬─────────────────────── ──┬ ┬─────── ──┬ ┬──────── ────────────────────────────────┤ └ ┘─/─ └ ┘──, ──┬ ┬── ──┬ ┬─── JM ───── └ ┘ ─,Held─ └ ┘ ─,Ready─ │ │└ ┘─/─ └ ┘── ──┬ ┬─── JOBMASK └ ┘─/─

$L Only Selection Limiting Keywords:

46 OS/390 V2R10 JES2 Commands Summary

Page 57: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬─────────────────────────────────────────────── ──┬ ┬────────────────────────────────────── ─────┤ └ ┘──, ──┬ ┬─── CMDauth ──┬ ┬─=── ──┬ ┬──cmdauth ───────── └ ┘──, ──┬ ┬── ──┬ ┬─── JM ───── ──┬ ┬─=── jobmask └ ┘─/─ └ ┘─¬=─ │ │┌ ┐─,───── │ │└ ┘─/─ ├ ┤─¬=─

└ ┘──( ───(2) ───� ┴cmdauth ) └ ┘── ──┬ ┬─── JOBMASK ├ ┤─>── └ ┘─/─ └ ┘─<──

$CO, $PO ONLY Keywords:├──┤ Common Part 1 ├──┤ Common Part 3 ├─ ──, ──┬ ┬─── ALL ──, ──┬ ┬─── HELD ─────────────────────────────────� └ ┘─/─ └ ┘─/─

�─ ──┬ ┬──────────────────────────────── ──┬ ┬────────────────────────────── ────────────────────────────� └ ┘──, ──┬ ┬─── HOLD ──┬ ┬─=── ──┬ ┬─NONE─ └ ┘──, ──┬ ┬─── HOLDRC ──┬ ┬─=── holdrc └ ┘─/─ └ ┘─¬=─ ├ ┤─OPER─ └ ┘─/─ ├ ┤─¬=─ └ ┘─SYS── ├ ┤─>── └ ┘─<──

�─ ──┬ ┬────────────────────────────── ──, ──┬ ┬─── PROTected ──┬ ┬────────────────────────────── ───────────� └ ┘──, ──┬ ┬─── PAGES ──┬ ┬─=── ─pages─ └ ┘─/─ └ ┘──, ──┬ ┬─── OUTGrp ──┬ ┬─=── outgrp └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬──────────────────────────── ──┬ ┬────────────────────────────────── ──┬ ┬───────────────────── ───┤ └ ┘──, ──┬ ┬─── Queue ──┬ ┬─=── queue └ ┘──, ──┬ ┬─── RECORDS ──┬ ┬─=── ─records─ └ ┘ ─,─ ──┬ ┬─┤ $CO Only ├─ └ ┘─/─ └ ┘─¬=─ └ ┘─/─ ├ ┤─¬=─ └ ┘─┤ $PO Only ├─ ├ ┤─>── └ ┘─<──

$CO Only:├─ ──┬ ┬───────────────────────────────── ─────────────────────────────────────────────────────────────┤ ├ ┤── ──┬ ┬─── Dest ──┬ ┬─=── ──────────── │ │└ ┘─/─ └ ┘─¬=─ └ ┘── ──┬ ┬─── Routecde ──┬ ┬─=── routecde └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

$PO Only:├─ ──┬ ┬─────────────────────────────────────── ───────────────────────────────────────────────────────┤ └ ┘ ──┬ ┬── ──┬ ┬─── Dest ──── ──┬ ┬─=── ─routecde─ │ │└ ┘─/─ ├ ┤─¬=─

└ ┘── ──┬ ┬─── Routecde ├ ┤─>── └ ┘─/─ └ ┘─<──

$DO Only Display Limiting Keywords:├─ ──┬ ┬────── ──┬ ┬──────── ──┬ ┬───────── ──┬ ┬───────────── ──┬ ┬──────────── ──┬ ┬────────────── ────────────�

└ ┘──,ALL └ ┘──,Burst └ ┘──,CRTIME └ ┘──, ──┬ ┬─Age── └ ┘──, ──┬ ┬─C─── └ ┘──, ──┬ ┬─FLash─ └ ┘─DAys─ └ ┘─FCB─ └ ┘─O─────

�─ ──┬ ┬──────── ──┬ ┬─────── ──┬ ┬───────── ──┬ ┬──────────────── ──┬ ┬───────── ──┬ ┬──────── ──┬ ┬───────── ────�└ ┘──,Forms └ ┘──,HELD └ ┘──,HOLDRC └ ┘──, ──┬ ┬─NDISP─── └ ┘──,OUTGrp └ ┘──,PAGEs └ ┘──,PRMode

└ ┘─OUTDisp─

�─ ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬───────────────── ──┬ ┬─────────── ──┬ ┬─────────── ──┬ ┬──────────── ─────�└ ┘──,READY └ ┘──,RECords └ ┘──, ──┬ ┬─Dest───── └ ┘──,SECLABEL └ ┘──,TSOavail └ ┘──, ──┬ ┬─T───

└ ┘─Routecde─ └ ┘─UCS─

�─ ──┬ ┬───────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬──────── ──┬ ┬──────────────── ──┬ ┬─────── ──┬ ┬─────── ──────�└ ┘──,Writer └ ┘──,CMDauth └ ┘──,HOLD └ ┘──,Hours └ ┘──, ──┬ ┬─JM────── └ ┘──,LONG └ ┘──,OFFS

└ ┘─JOBMASK─

�─ ──┬ ┬─────────── ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬───────── ───────────────────────────────┤└ ┘──,Priority └ ┘──,Queue └ ┘──,REBUILD └ ┘──,STATus └ ┘──,USERID

$DO Only Selection Limiting Keywords:├──┤ Common Part 1 ├─ ──┬ ┬───────────── ──┬ ┬───────────────────────────────────────────────── ─────────┤ └ ┘──, ──┬ ┬─── ALL └ ┘─┤ $DO, $TO COMMON Selection Limiting Keywords ├─ └ ┘─/─

$DO, $TO COMMON Selection Limiting Keywords:├─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────────── ──────────────────────� └ ┘──, ───(3) ──┬ ┬─── Burst ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ──┬ ┬── ───(3) ──┬ ┬─── C ── ──┬ ┬─=── fcb └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─ │ │└ ┘─/─ ├ ┤─¬=─

└ ┘── ───(3) ──┬ ┬─── FCB ├ ┤─>── └ ┘─/─ └ ┘─<──

�─ ──┬ ┬───────────────────────────────────── ──┬ ┬─────────────────────────────── ──────────────────────� └ ┘──, ──┬ ┬── ───(3) ──┬ ┬─── FLash ──┬ ┬─=── flash └ ┘──, ───(3) ──┬ ┬─── Forms ──┬ ┬─=── forms │ │└ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ └ ┘── ───(3) ──┬ ┬─── O ──── ├ ┤─>── ├ ┤─>── └ ┘─/─ └ ┘─<── └ ┘─<──

Chapter 1. JES2 Commands Summary 47

Page 58: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬───────────────── ──┬ ┬─────────────────────────────────── ──────────────────────────────────────� └ ┘──, ───(3) ──┬ ┬─── HELD └ ┘──, ───(3) ──┬ ┬─── HOLD ──┬ ┬─=── ──┬ ┬─NONE─ └ ┘─/─ └ ┘─/─ └ ┘─¬=─ ├ ┤─OPER─ └ ┘─SYS──

�─ ──┬ ┬───────────────────────────────── ──┬ ┬────────────────────────────── ───────────────────────────� └ ┘──, ───(3) ──┬ ┬─── HOLDRC ──┬ ┬─=── holdrc └ ┘──, ───(3) ──┬ ┬─── Hours ──┬ ┬─>─ hours └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─<─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬──────────────────────────────────────────── ──────────────────────────────────────────────────� └ ┘──, ───(3) ──┬ ┬─── OFFS ──┬ ┬─=── ──┬ ┬──offs ───────── └ ┘─/─ └ ┘─¬=─ │ │┌ ┐─,── └ ┘──( ───(4) ───� ┴offs )

�─ ──┬ ┬───────────────────────────────────────────── ──┬ ┬────────────────────────────── ───────────────� └ ┘──, ──┬ ┬── ───(3) ──┬ ┬─── NDISP ── ──┬ ┬─=── ──┬ ┬─H───── └ ┘──, ──┬ ┬─── OUTGrp ──┬ ┬─=── outgrp │ │└ ┘─/─ └ ┘─¬=─ ├ ┤─HOLD── └ ┘─/─ └ ┘─¬=─ └ ┘── ───(3) ──┬ ┬─── OUTDisp ├ ┤─K───── └ ┘─/─ ├ ┤─KEEP── ├ ┤─L───── ├ ┤─LEAVE─ ├ ┤─P───── ├ ┤─PURGE─ ├ ┤─W───── └ ┘─WRITE─

�─ ──┬ ┬──────────────────────────── ──┬ ┬───────────────────────────────── ─────────────────────────────� └ ┘──, ──┬ ┬─── PAGEs ──┬ ┬─=── pages └ ┘──, ───(3) ──┬ ┬─── PRMode ──┬ ┬─=── prmode └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬─────────────────────────────── ──┬ ┬─────────────── ──┬ ┬──────────────────────────────── ────────� └ ┘──, ───(3) ──┬ ┬─── Queue ──┬ ┬─=── queue └ ┘──, ──┬ ┬─── READY └ ┘──, ──┬ ┬─── RECords ──┬ ┬─=── records └ ┘─/─ └ ┘─¬=─ └ ┘─/─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬─────────────────────────────────────────── ──┬ ┬─────────────────────────────────── ────────────� └ ┘──, ──┬ ┬── ───(3) ──┬ ┬─── Dest ──┬ ┬─=── ──── routecde └ ┘──, ──┬ ┬─── TSOavail ──┬ ┬─=── ──┬ ┬─No── │ │└ ┘─/─ └ ┘─¬=─ └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─ └ ┘── ───(3) ──┬ ┬─── Routecde ──┬ ┬─=── └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬───────────────────────────────── ──┬ ┬───────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬── ───(3) ──┬ ┬─── T ── ──┬ ┬─=── ucs └ ┘──, ───(3) ──┬ ┬─── Writer ──┬ ┬─=── writer │ │└ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─

└ ┘── ───(3) ──┬ ┬─── UCS ├ ┤─>── ├ ┤─>── └ ┘─/─ └ ┘─<── └ ┘─<──

�─ ──┬ ┬────────────────────────────── ──┬ ┬────────────────────────────────── ──────────────────────────� └ ┘──, ──┬ ┬─── USERID ──┬ ┬─=── userid └ ┘──, ──┬ ┬─── SECLABEL ──┬ ┬─=── seclabel └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬───────────────────────────────────── ─────────────────────────────────────────────────────────┤ └ ┘──, ───(3) ──┬ ┬─── Priority ──┬ ┬─=── priority └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

$TO Only Selection Limiting Keywords:├─ ──┬ ┬────────────────────────────────────────────────── ──┬ ┬─────────────────────────────── ─────────� └ ┘─┤ $DO, $TO COMMON Selection Limiting Keywords ├─ └ ┘──, ──┬ ┬── ──┬ ┬─── Age ─ ──┬ ┬─>─ days │ │└ ┘─/─ └ ┘─<─ └ ┘── ──┬ ┬─── DAys └ ┘─/─

�─ ──┬ ┬────────────────────────────────────── ────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬── ──┬ ┬─── JM ───── ──┬ ┬─=── jobmask │ │└ ┘─/─ ├ ┤─¬=─

└ ┘── ──┬ ┬─── JOBMASK ├ ┤─>── └ ┘─/─ └ ┘─<──

$TO Only Modification Keywords:

48 OS/390 V2R10 JES2 Commands Summary

Page 59: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

├─ ──┬ ┬───────────────────────────── ──┬ ┬───────────────────────────────────── ────────────────────────� └ ┘──, ──── HOLD ─── ──=─ ──┬ ┬─-OPER─ └ ┘──, ──── OFFS ─── ──=─ ──┬ ┬──offs ───────── ├ ┤─-SYS── │ │┌ ┐─,── ├ ┤─NONE── └ ┘──( ───(4) ───� ┴offs ) ├ ┤─OPER── └ ┘─NONE──

�─ ──┬ ┬────────────────────────────────────── ──┬ ┬──────────────────── ────────────────────────────────�└ ┘──, ─── ─── ──── OUTDisp ─── ──=─ ──┬ ┬─H───── └ ┘──,Priority=priority

├ ┤─HOLD── ├ ┤─K───── ├ ┤─KEEP── ├ ┤─L───── ├ ┤─LEAVE─ ├ ┤─P───── ├ ┤─PURGE─ ├ ┤─W───── └ ┘─WRITE─

�─ ──┬ ┬────────────────────────── ──┬ ┬──────────────────────── ──┬ ┬──────────────────────────── ────────� └ ┘──, ──── PRMode ─── ──=─ prmode └ ┘──, ──── Forms ─── ──=─ forms └ ┘──, ──── Burst ─── ──=─ ──┬ ┬─No── └ ┘─Yes─

�─ ──┬ ┬────────────────────────── ──┬ ┬────────────────────────────── ──┬ ┬────────────────────────── ────�└ ┘──, ──┬ ┬── ──── C ── ─── ──=─ fcb └ ┘──, ──┬ ┬── ──── FLash ─── ──=─ flash └ ┘──, ──┬ ┬── ──── T ── ─── ──=─ ucs

└ ┘── ──── FCB └ ┘── ──── O ──── └ ┘── ──── UCS

�─ ──┬ ┬────────────────────────── ──┬ ┬───────────────────────────────────────── ───────────────────────� └ ┘──, ──── Writer ─── ──=─ writer └ ┘ ─,─ ──┬ ┬───────────────── ─── ──=─ ─routecde─

├ ┤── ──── Dest ─────── └ ┘── ──┬ ┬─── Routecde └ ┘─/─

�─ ──┬ ┬───────────────────────── ──┬ ┬──────────────── ─────────────────────────────────────────────────┤ └ ┘─,──RELease──=─ ──┬ ┬─ALL── └ ┘─,──Queue──=──c─ ├ ┤─OPER─ └ ┘─SYS──

Common Part 1:├─ ──┬ ┬───────────────────────────────────────── ──┬ ┬─────────────────────────────── ──────────────────�

└ ┘─┤ $L Only Selection Limiting Keywords ├─ └ ┘──, ──┬ ┬── ──┬ ┬─── Age ─ ──┬ ┬─>─ days │ │└ ┘─/─ └ ┘─<─ └ ┘── ──┬ ┬─── DAys └ ┘─/─

�─ ──┬ ┬─────────────────────────── ──┬ ┬────────────────────────────────── ─────────────────────────────┤ └ ┘──, ──┬ ┬─── Hours ──┬ ┬─>─ hours └ ┘──, ──┬ ┬─── REBUILD ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─<─ └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─

Common Part 2:├─ ──┬ ┬────────────────────────────────── ────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── Queue ──┬ ┬─=── ──┬ ┬─CNV─── └ ┘─/─ └ ┘─¬=─ ├ ┤─INPUT─ ├ ┤─OUT─── ├ ┤─PPU─── ├ ┤─PURGE─ ├ ┤─RCV─── ├ ┤─SETUP─ ├ ┤─SPIN── ├ ┤─XEQ─── └ ┘─XMT───

Common Part 3:├─ ──┬ ┬─────────────────────────────────────────────────────────────────────────── ───────────────────� │ │┌ ┐─,───────────────────────────────────────────── └ ┘──, ──┬ ┬── ──┬ ┬─── SPL ── =( ───� ┴┬ ┬── ──┬ ┬── ──┬ ┬─── % ────── ──┬ ┬─>─ percent ───────── ) │ │└ ┘─/─ │ ││ │└ ┘─/─ └ ┘─<─ └ ┘── ──┬ ┬─── SPOOL │ │└ ┘── ──┬ ┬─── Percent └ ┘─/─ │ │└ ┘─/─ ├ ┤── ──┬ ┬─── Tgs ──┬ ┬─>─ tgs ─────────────────────── │ │└ ┘─/─ └ ┘─<─ └ ┘── ──┬ ┬─── Volumes ──┬ ┬─=── ──┬ ┬──volume ───────── └ ┘─/─ └ ┘─¬=─ │ │┌ ┐─,──── └ ┘──( ───(5) ───� ┴volume )

�─ ──┬ ┬─────────────────────────────── ──┬ ┬──────────────────────────────── ───────────────────────────┤ └ ┘──, ──┬ ┬─── TYPE ──┬ ┬─=── ──┬ ┬─JOB─ └ ┘──, ──┬ ┬─── XEQNode ──┬ ┬─=── xeqnode └ ┘─/─ └ ┘─¬=─ ├ ┤─STC─ └ ┘─/─ └ ┘─¬=─ └ ┘─TSU─

Chapter 1. JES2 Commands Summary 49

Page 60: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 cmdauth can be coded up to 2 times.3 "/" is mandatory for $TO.4 offs can be coded up to 8 times.5 volume can be coded up to 253 times.

$ Job Commands

��─ ──┬ ┬ ──┬ ┬─$A─ ──┬ ┬─Job── ──┬ ┬─────────────────── ────────────────────────────────────────────────────� │ │├ ┤─$C─ ├ ┤─JOBQ─ └ ┘─┤ Identifier ├────(1)

│ │├ ┤─$D─ ├ ┤─JQ─── │ │├ ┤─$E─ ├ ┤─Stc── │ │├ ┤─$H─ └ ┘─Tsu──

| │ │├ ┤─$L─ │ │├ ┤─$O─ │ │├ ┤─$P─ │ │└ ┘─$T─ └ ┘─$S──Job──────────

�─ ──┬ ┬──────────────────────────────────────────────────────────────────────────────── ─────────────�! ├ ┤──┬ ┬─────────────────────────────────────────────────────── ───────────────────── │ │└ ┘─┤ $A, $E, or $H ONLY Keywords ├──┤ $E Only Keywords ├─ ├ ┤──┬ ┬────────────────────── ────────────────────────────────────────────────────── │ │└ ┘─┤ $P Only Keywords ├─ ├ ┤──┬ ┬──────────────────────────────────────────────────────────────────────────── │ │└ ┘─┤ $C ONLY Modification Keywords ├──┤ $C ONLY Selection Limiting Keywords ├─ ├ ┤──┬ ┬────────────────────── ────────────────────────────────────────────────────── │ │└ ┘─┤ $O ONLY Keywords ├─ ├ ┤──┬ ┬──────────────────────────────────────────────────────────────────────────── │ │└ ┘─┤ $T Only Modification Keywords ├──┤ $T Only Selection Limiting Keywords ├─ └ ┘──┬ ┬──────────────────────────────────────────────────────────────────────────── └ ┘─┤ $D Only Modification Keywords ├──┤ $D Only Selection Limiting Keywords ├─

$A, $E, or $H ONLY Keywords:├──┤ Common Part 1 ├──┤ Common Part 2 ├──┤ Common Part 3 ├──────────────────────────────────────────┤

$E Only Keywords:├─ ──┬ ┬─────────── ───────────────────────────────────────────────────────────────────────────────────┤ └ ┘ ─,──CANCEL─

$P Only Keywords:├─ ──┬ ┬──────────── ──────────────────────────────────────────────────────────────────────────────────┤ └ ┘ ─,Protected─

$C ONLY Modification Keywords:├──┤ Common Part 1 ├──┤ Common Part 2 ├──┤ Common Part 3 ├─ ──┬ ┬──────── ─────────────────────────────┤ └ ┘ ─,Purge─

$C ONLY Selection Limiting Keywords:├──┤ Common Part 1 ├──┤ Common Part 2 ├──┤ Common Part 3 ├─ ── ──┬ ┬─── ARMRESTART ── ──┬ ┬─── Dump ─────────� └ ┘─/─ └ ┘─/─

�─ ── ──┬ ┬─── PROTected ────────────────────────────────────────────────────────────────────────────────┤ └ ┘─/─

$O ONLY Keywords:├──┤ Common Part 1 ├──┤ Common Part 3 ├─ ──, ──┬ ┬─── ALL ──, ──┬ ┬─── HELD ─────────────────────────────────� └ ┘─/─ └ ┘─/─

�─ ──┬ ┬────────────────────────────── ──, ──┬ ┬─── PROTected ──┬ ┬────────────────────────────── ───────────� └ ┘──, ──┬ ┬─── PAGES ──┬ ┬─=── ─pages─ └ ┘─/─ └ ┘──, ──┬ ┬─── OUTGrp ──┬ ┬─=── outgrp └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬──────────────────────────── ──┬ ┬────────────────────────────────── ────────────────────────────� └ ┘──, ──┬ ┬─── Queue ──┬ ┬─=── queue └ ┘──, ──┬ ┬─── RECORDS ──┬ ┬─=── ─records─ └ ┘─/─ └ ┘─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

50 OS/390 V2R10 JES2 Commands Summary

Page 61: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬──────────────────────────────────────── ──────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬── ──┬ ┬─── Dest ──┬ ┬─=── ──── routecde │ │└ ┘─/─ └ ┘─¬=─ └ ┘── ──┬ ┬─── Routecde ──┬ ┬─=── └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

$D Only Display Limiting Keywords:├─ ──┬ ┬────────────── ──┬ ┬───────── ──┬ ┬──────── ──┬ ┬────────────────────────────────────── ─────────────�

└ ┘──,ARM_element └ ┘──,CANCEL └ ┘──,CARDS └ ┘──,CC ──┬ ┬───────────────────────────── │ │┌ ┐─,──────────────────

└ ┘──=( ───� ┴┬ ┬──ABEND ─────────── ) ├ ┤──ABENDED ───────── ├ ┤──CANcelled ─────── ├ ┤──CNVT_abend ────── ├ ┤──CODE ──────────── ├ ┤──COMPleted ─────── ├ ┤──ENDed_by_cc ───── ├ ┤──EOM_failure ─────

├ ┤ ─ ─JCLerror ──────── ├ ┤──SECurity_failure └ ┘──TYPE ────────────

�─ ──┬ ┬──────── ──┬ ┬───────────── ──┬ ┬──────── ──┬ ┬─────────── ──┬ ┬──────── ──┬ ┬───────── ─────────────────�└ ┘──,Class └ ┘──, ──┬ ┬─Age── └ ┘──,DELAY └ ┘──,INITASID └ ┘──,PURGE └ ┘──,SCHENV

└ ┘─DAys─

�─ ──┬ ┬───────────── ──┬ ┬─────────── ──┬ ┬──────────────────────────────────────────── ──┬ ┬─────────── ───�└ ┘──,SCHENV_AFF └ ┘──,SECLABEL └ ┘──, ──┬ ┬─SPL─── ──┬ ┬────────────────────────── └ ┘──,SRVCLASS

└ ┘─SPOOL─ │ │┌ ┐─,───────────────└ ┘──=( ───� ┴┬ ┬── ──┬ ┬─%─────── )

│ │└ ┘─Percent─ ├ ┤──Tgs ────────── └ ┘──Volumes ──────

�─ ──┬ ┬───────── ──┬ ┬─────── ──┬ ┬────────── ──┬ ┬────────── ──┬ ┬─────── ──┬ ┬──────── ──┬ ┬──────────────── ───�└ ┘──,Sysaff └ ┘──,TYPE └ ┘──,XEQNode └ ┘──,CMDauth └ ┘──,HOLD └ ┘──,Hours └ ┘──, ──┬ ┬─JM──────

└ ┘─JOBMASK─

�─ ──┬ ┬─────── ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬───────── ──┬ ┬───────── ─────────┤└ ┘──,LONG └ ┘──,OFFS └ ┘──,Priority └ ┘──,Queue └ ┘──,REBUILD └ ┘──,STATus └ ┘──,USERID

$D Only Selection Limiting Keywords:├─ ──┬ ┬────────────────────────────────────── ──┬ ┬───────────────────────────────── ───────────────────� └ ┘──, ──┬ ┬─── ARM_element ──┬ ┬─=── ──┬ ┬─No── └ ┘──, ──┬ ┬─── CANCEL ──┬ ┬──── ──┬ ┬───── └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─ └ ┘─/─ ├ ┤─=── ├ ┤─No── └ ┘─¬=─ └ ┘─Yes─

�─ ──┬ ┬──────────────────────────── ──────────────────────────────────────────────────────────────────� └ ┘──, ──┬ ┬─── CARDS ──┬ ┬─=── cards └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

�─ ──┬ ┬──────────────────────────────────────────────────────────────────── ──────────────────────────� │ │┌ ┐─,─────────────────────────────────────────────── └ ┘──, ──┬ ┬─── CC=( ───� ┴┬ ┬── ──┬ ┬─── ABEND ──┬ ┬─=── ──┬ ┬──system ───────────── ) └ ┘─/─ │ │└ ┘─/─ └ ┘─¬=─ └ ┘──( system ──┬ ┬─────── )

│ │└ ┘──,user ├ ┤── ──┬ ┬─── ABENDED ─────────────────────────────── │ │└ ┘─/─ ├ ┤── ──┬ ┬─── CANcelled ───────────────────────────── │ │└ ┘─/─ ├ ┤── ──┬ ┬─── CNVT_abend ──────────────────────────── │ │└ ┘─/─ ├ ┤── ──┬ ┬─── CODE ──┬ ┬─=── code ────────────────────── │ │└ ┘─/─ ├ ┤─¬=─ │ │├ ┤─>── │ │└ ┘─<── ├ ┤── ──┬ ┬─── COMPleted ───────────────────────────── │ │└ ┘─/─ ├ ┤── ──┬ ┬─── ENDed_by_cc ─────────────────────────── │ │└ ┘─/─ ├ ┤── ──┬ ┬─── EOM_failure ─────────────────────────── │ │└ ┘─/─ ├ ┤── ──┬ ┬─── JCLerror ────────────────────────────── │ │└ ┘─/─ └ ┘── ──┬ ┬─── SECurity_failure ────────────────────── └ ┘─/─

Chapter 1. JES2 Commands Summary 51

Page 62: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬──────────────────────────── ──┬ ┬────────────────────────────────────────────────── ────────────� └ ┘──, ──┬ ┬─── Class ──┬ ┬─=── class └ ┘──, ──┬ ┬─── DELAY ──┬ ┬─=── ──┬ ┬─BUSY_ON_DEVICE──────── └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ ├ ┤─HOLD────────────────── ├ ┤─>── ├ ┤─LIMIT───────────────── └ ┘─<── ├ ┤─LOCKED──────────────── ├ ┤─No──────────────────── ├ ┤─SCHENV──────────────── ├ ┤─SPOOLS_NOT_AVAILABLE── ├ ┤─SYSAFF──────────────── ├ ┤─SYSTEMS_NOT_AVAILABLE─ └ ┘─Yes───────────────────

�─ ──┬ ┬──────────────────────────────── ──┬ ┬────────────────────────────────── ────────────────────────� └ ┘──, ──┬ ┬─── HOLD ──┬ ┬─=── ──┬ ┬─ALL── └ ┘──, ──┬ ┬─── INITASID ──┬ ┬─=── initasid └ ┘─/─ └ ┘─¬=─ ├ ┤─ARM── └ ┘─/─ ├ ┤─¬=─ ├ ┤─DUP── ├ ┤─>── ├ ┤─JOB── └ ┘─<── └ ┘─NONE─

�─ ──┬ ┬───────────────────────────────────────── ──┬ ┬──────────────────────────────── ─────────────────� └ ┘──, ──┬ ┬─── OFFS ──┬ ┬─=── ──┬ ┬──offs ───────── └ ┘──, ──┬ ┬─── PURGE ──┬ ┬──── ──┬ ┬───── └ ┘─/─ └ ┘─¬=─ │ │┌ ┐─,── └ ┘─/─ ├ ┤─=── ├ ┤─No── └ ┘──( ───(2) ───� ┴offs ) └ ┘─¬=─ └ ┘─Yes─

�─ ──┬ ┬────────────────────────────── ──┬ ┬───────────────────────────────────────────────── ───────────� └ ┘──, ──┬ ┬─── SCHENV ──┬ ┬─=── schenv └ ┘──, ──┬ ┬─── SCHENV_AFF ──┬ ┬─=── ──┬ ┬──member ───────── └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ │ │┌ ┐─,──── ├ ┤─>── └ ┘──( ───(3) ───� ┴member ) └ ┘─<──

�─ ──┬ ┬────────────────────────────────── ──┬ ┬───────────────────────────────────────────── ───────────� └ ┘──, ──┬ ┬─── SRVCLASS ──┬ ┬─=── srvclass └ ┘──, ──┬ ┬─── Sysaff ──┬ ┬─=── ──┬ ┬──member ───────── └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ │ │┌ ┐─,──── ├ ┤─>── └ ┘──( ───(3) ───� ┴member ) └ ┘─<──

�──┤ Common Part 1 ├──┤ Common Part 2 ├──┤ Common Part 3 ├──────────────────────────────────────────�

�──┤ $T, $D COMMON Selection Limiting Keywords ├────────────────────────────────────────────────────┤

$L Only Selection Limiting Keywords:├─ ──┬ ┬─────────────────────────────────────────── ──┬ ┬────────────────────────────────────── ─────────┤

| └ ┘──,| ──┬ ┬─── CMDauth ──┬ ┬─=── ──┬ ┬──cmdauth ───── └ ┘──, ──┬ ┬── ──┬ ┬─── JM ───── ──┬ ┬─=── jobmask| └ ┘─/─ └ ┘─¬=─ └ ┘──( ───(4)| cmdauth ) │ │└ ┘─/─ ├ ┤─¬=─| └ ┘── ──┬ ┬─── JOBMASK ├ ┤─>──| └ ┘─/─ └ ┘─<──

$T, $D COMMON Selection limitng Keywords:├─ ──┬ ┬────────────────────────────── ──┬ ┬────────────────────────────────── ──────────────────────────� └ ┘──, ──┬ ┬─── USERID ──┬ ┬─=── userid └ ┘──, ──┬ ┬─── SECLABEL ──┬ ┬─=── seclabel └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬────────────────────────────────── ────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── Priority ──┬ ┬─=── priority └ ┘─/─ ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

$T Only Modification Keywords:├─ ──┬ ┬────────────── ──┬ ┬─────────────────────────── ──┬ ┬──────────────────── ─────────────────────────�

└ ┘──,Class=class └ ┘──,OFFS= ──┬ ┬──offs ───────── └ ┘──,Priority=priority │ │┌ ┐─,── └ ┘──( ───(2) ───� ┴offs )

�─ ──┬ ┬──────────────────── ──┬ ┬─────────────────────────────── ───────────────────────────────────────┤└ ┘──,SRVCLASS=srvclass └ ┘──,Sysaff= ──┬ ┬──member ─────────

│ │┌ ┐─,──── └ ┘──( ───(3) ───� ┴member )

$T Only Selection Limiting Keywords:├──┤ Common Part 1 ├──┤ Common Part 2 ├──┤ Common Part 3 ├─ ──┬ ┬──────────────────────────── ─────────� └ ┘──, ─── ──/─ Class ──┬ ┬─=── class ├ ┤─¬=─ ├ ┤─>── └ ┘─<──

52 OS/390 V2R10 JES2 Commands Summary

Page 63: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

�─ ──┬ ┬──────────────────────────────── ──┬ ┬───────────────────────────────────────── ─────────────────� └ ┘──, ──┬ ┬─── HOLD ──┬ ┬─=── ──┬ ┬─ALL── └ ┘──, ─── ──/─ OFFS ──┬ ┬─=── ──┬ ┬──offs ───────── └ ┘─/─ └ ┘─¬=─ ├ ┤─ARM── └ ┘─¬=─ │ │┌ ┐─,── ├ ┤─DUP── └ ┘──( ───(4) ───� ┴offs ) ├ ┤─JOB── └ ┘─NONE─

�─ ──┬ ┬────────────────────────────── ──┬ ┬────────────────────────────────── ──────────────────────────� └ ┘──, ──┬ ┬─── SCHENV ──┬ ┬─=── schenv └ ┘──, ─── ──/─ SRVCLASS ──┬ ┬─=── srvclass └ ┘─/─ ├ ┤─¬=─ ├ ┤─¬=─ ├ ┤─>── ├ ┤─>── └ ┘─<── └ ┘─<──

�─ ──┬ ┬───────────────────────────────────────────── ─────────────────────────────────────────────────┤ └ ┘──, ─── ──/─ Sysaff ──┬ ┬─=── ──┬ ┬──member ───────── └ ┘─¬=─ │ │┌ ┐─,──── └ ┘──( ───(3) ───� ┴member )

Common Part 1:├─ ──┬ ┬───────────────────────────────────────── ──┬ ┬─────────────────────────────── ──────────────────�

└ ┘─┤ $L Only Selection Limiting Keywords ├─ └ ┘──, ──┬ ┬── ──┬ ┬─── Age ─ ──┬ ┬─>─ days │ │└ ┘─/─ └ ┘─<─ └ ┘── ──┬ ┬─── DAys └ ┘─/─

�─ ──┬ ┬─────────────────────────── ──┬ ┬────────────────────────────────── ─────────────────────────────┤ └ ┘──, ──┬ ┬─── Hours ──┬ ┬─>─ hours └ ┘──, ──┬ ┬─── REBUILD ──┬ ┬─=── ──┬ ┬─No── └ ┘─/─ └ ┘─<─ └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─

Common Part 2:├─ ──┬ ┬────────────────────────────────── ────────────────────────────────────────────────────────────┤ └ ┘──, ──┬ ┬─── Queue ──┬ ┬─=── ──┬ ┬─CNV─── └ ┘─/─ └ ┘─¬=─ ├ ┤─INPUT─ ├ ┤─OUT─── ├ ┤─PPU─── ├ ┤─PURGE─ ├ ┤─RCV─── ├ ┤─SETUP─ ├ ┤─SPIN── ├ ┤─XEQ─── └ ┘─XMT───

Common Part 3:├─ ──┬ ┬─────────────────────────────────────────────────────────────────────────── ───────────────────� │ │┌ ┐─,───────────────────────────────────────────── └ ┘──, ──┬ ┬── ──┬ ┬─── SPL ── =( ───� ┴┬ ┬── ──┬ ┬── ──┬ ┬─── % ────── ──┬ ┬─>─ percent ───────── ) │ │└ ┘─/─ │ ││ │└ ┘─/─ └ ┘─<─ └ ┘── ──┬ ┬─── SPOOL │ │└ ┘── ──┬ ┬─── Percent └ ┘─/─ │ │└ ┘─/─ ├ ┤── ──┬ ┬─── Tgs ──┬ ┬─>─ tgs ─────────────────────── │ │└ ┘─/─ └ ┘─<─ └ ┘── ──┬ ┬─── Volumes ──┬ ┬─=── ──┬ ┬──volume ───────── └ ┘─/─ └ ┘─¬=─ │ │┌ ┐─,──── └ ┘──( ───(5) ───� ┴volume )

�─ ──┬ ┬─────────────────────────────── ──┬ ┬──────────────────────────────── ───────────────────────────┤ └ ┘──, ──┬ ┬─── TYPE ──┬ ┬─=── ──┬ ┬─JOB─ └ ┘──, ──┬ ┬─── XEQNode ──┬ ┬─=── xeqnode └ ┘─/─ └ ┘─¬=─ ├ ┤─STC─ └ ┘─/─ └ ┘─¬=─ └ ┘─TSU─

Notes:1 See “JES2 Commands Common Syntax Elements” on page 6.2 offs can be coded up to 8 times3 member can be coded up to 33 times

| 4 cmdauth can be coded up to 2 times.5 volume can be coded up to 253 times

$V S - Enter MVS System Commands through JES2

┌ ┐────────────────��─ ─$VS─ ──,'command' ───� ┴┬ ┬──────────── ─────────────────────────────────────────────────────────────�! └ ┘ ─,'command'─

Chapter 1. JES2 Commands Summary 53

Page 64: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

$Mnn - Send commands to other MAS members

��─ ─$M─ ─nn──,'command'───────────────────────────────────────────────────────�!

$Nnnnn - Send Commands through the Network

��─ ─$N─ ──┬ ┬──────────────── ─,'command'───────────────────────────────────────�!├ ┤──nnnn(Mmm) ─────

└ ┘─,D=─ ──┬ ┬──Nnnnn └ ┘─name──

| $D Line - Display a Line

54 OS/390 V2R10 JES2 Commands Summary

Page 65: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

|

| ��─ ──$D ── ──┬ ┬─LINE─ ──┬ ┬─────────────────────────────────────── ──────────────────────────────────────�| └ ┘─LNE── ├ ┤──nnnn ──┬ ┬───────────── ────────────────| │ │└ ┘──- ──┬ ┬─nnnn─| │ │└ ┘─�────| │ │┌ ┐─,─────────────────────────────| └ ┘──( ───� ┴─ ─── ──┬ ┬─nnnn─ ──┬ ┬───────────── )| └ ┘─�──── └ ┘──- ──┬ ┬─nnnn─| └ ┘─�────

| �─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────────── ─────────────────────�!| └ ┘───┤ Selection limiting keywords ├─ └ ┘───┤ Display limiting keywords ├─

| Display limiting keywords:| ├─ ──┬ ┬─────────── ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬───────── ──┬ ┬───────── ──┬ ┬─────────── ──┬ ┬──────── ────�| └ ┘──,AUTODISC └ ┘──,CODE └ ┘──,COMPRESS └ ┘──,Discon └ ┘──,DUPLEX └ ┘──,INTERFAC └ ┘──,JRNUM

| �─ ──┬ ┬──────── ──┬ ┬─────────── ──┬ ┬────── ──┬ ┬─────────── ──┬ ┬─────── ──┬ ┬─────────── ──┬ ┬─────────── ─────�| └ ┘──,JTNUM └ ┘──,LINECCHR └ ┘──,LOG └ ┘──,Password └ ┘──,REST └ ┘──,RMTSHARE └ ┘──,SESsions

| �─ ──┬ ┬──────── ──┬ ┬──────── ──┬ ┬───────── ──┬ ┬──────── ──┬ ┬────────── ──┬ ┬─────────── ──┬ ┬─────── ─────────┤| └ ┘──,SPEED └ ┘──,SRNUM └ ┘──,STATUS └ ┘──,STNUM └ ┘──,TRaceio └ ┘──,TRANSPAR └ ┘──,UNIT

| Selection limiting keywords:| ├─ ──┬ ┬─────────────────────────────────── ──┬ ┬───────────────────────────── ──────────────────────────�| └ ┘──,| ──┬ ┬─── AUTODISC ──┬ ┬─=── ──┬ ┬─No── └ ┘──,| ──┬ ┬─── CODE ──┬ ┬─=── ──┬ ┬─A─| └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─ └ ┘─/─ └ ┘─¬=─ └ ┘─B─

| �─ ──┬ ┬─────────────────────────────────── ──┬ ┬─────────────────────────────────────── ────────────────�| └ ┘──,| ──┬ ┬─── COMPRESS ──┬ ┬─=── ──┬ ┬─No── └ ┘──,| ──┬ ┬─── Discon ──┬ ┬─=── ──┬ ┬─I─────────| └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─ └ ┘─/─ └ ┘─¬=─ ├ ┤─INTERRUPT─| ├ ┤─No────────| ├ ┤─Q─────────| └ ┘─QUIESCE───

| �─ ──┬ ┬────────────────────────────────── ──┬ ┬───────────────────────────────── ───────────────────────�| └ ┘──,| ──┬ ┬─── DUPLEX ──┬ ┬─=── ──┬ ┬─FULL─ └ ┘──,| ──┬ ┬─── INTERFAC ──┬ ┬─=── ──┬ ┬─A─| └ ┘─/─ └ ┘─¬=─ └ ┘─HALF─ └ ┘─/─ └ ┘─¬=─ └ ┘─B─

| �─ ──┬ ┬──────────────────────── ──┬ ┬──────────────────────── ──────────────────────────────────────────�| └ ┘──,| ──┬ ┬─── JRNUM ──┬ ┬─=── n └ ┘──, | ──┬ ┬─── JTNUM ──┬ ┬─=── n| └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ ├ ┤─¬=─| ├ ┤─>── ├ ┤─>──| └ ┘─<── └ ┘─<──

| �─ ──┬ ┬─────────────────────────────────────── ──┬ ┬────────────────────────────── ─────────────────────�| └ ┘──,| ──┬ ┬─── LINECCHR ──┬ ┬─=── ──┬ ┬─EBCDIC── └ ┘──,| ──┬ ┬─── LOG ──┬ ┬─=── ──┬ ┬─No──| └ ┘─/─ └ ┘─¬=─ └ ┘─USASCII─ └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─

| �─ ──┬ ┬────────────────────────── ──┬ ┬─────────────────────────────────── ─────────────────────────────�| └ ┘──,| ──┬ ┬─── REST ──┬ ┬─=── nnnn └ ┘──,| ──┬ ┬─── RMTSHARE ──┬ ┬─=── ──┬ ┬─No──| └ ┘─/─ ├ ┤─¬=─ └ ┘─/─ └ ┘─¬=─ ├ ┤─Yes─| ├ ┤─>── └ ┘─N/A─| └ ┘─<──

| �─ ──┬ ┬───────────────────────────────── ──┬ ┬──────────────────────── ─────────────────────────────────�| └ ┘──,| ──┬ ┬─── SPEED ──┬ ┬─=── ──┬ ┬─HIGH─ └ ┘──, | ──┬ ┬─── SRNUM ──┬ ┬─=── n| └ ┘─/─ └ ┘─¬=─ └ ┘─LOW── └ ┘─/─ ├ ┤─¬=─| ├ ┤─>──| └ ┘─<──

| �─ ──┬ ┬──────────────────────────────────────────────────── ──┬ ┬──────────────────────────── ──────────�| └ ┘──,| ──┬ ┬─── STATUS ──┬ ┬─=── ──┬ ┬─ACTIVE───────────────── └ ┘──, | ──┬ ┬─── STNUM ──┬ ┬─=── stnum| └ ┘─/─ └ ┘─¬=─ ├ ┤─DRAINED──────────────── └ ┘─/─ ├ ┤─¬=─| ├ ┤─DRAINING─────────────── ├ ┤─>──| ├ ┤─INACTIVE─────────────── └ ┘─<──| ├ ┤─SIGNON/AWAITING-MAS(x)─| └ ┘─SIGNON/AWAITING-c──────

| �─ ──┬ ┬────────────────────────────────── ──┬ ┬─────────────────────────────────── ─────────────────────�| └ ┘──,| ──┬ ┬─── TRaceio ──┬ ┬─=── ──┬ ┬─No── └ ┘──,| ──┬ ┬─── TRANSPAR ──┬ ┬─=── ──┬ ┬─No──| └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─ └ ┘─/─ └ ┘─¬=─ └ ┘─Yes─

| �─ ──┬ ┬─────────────────────────────────── ───────────────────────────────────────────────────────────┤| └ ┘──,| ──┬ ┬─── UNIT ──┬ ┬─=── ──┬ ┬─SNA─────| └ ┘─/─ ├ ┤─¬=─ ├ ┤─devnum──| ├ ┤─>── └ ┘─/devnum─| └ ┘─<──

Chapter 1. JES2 Commands Summary 55

Page 66: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

| $T SPOOL - Modify a Spool Volume|

| ��─ ──$T ── ──┬ ┬─SPL─── ──┬ ┬──────────────────────── ──┬ ┬────────── ─────────────────────────────────────�!| └ ┘─SPOOL─ ├ ┤──volser ──────────────── └ ┘──,SYSAFF=| ├ ┤──'volser' ──────────────| └ ┘──( ─── ─── ──┬ ┬─volser─── )| ├ ┤─�────────| └ ┘──'volser'

| $ZAPJOB - Remove Job Structure from Job Queue| Note: Use of this command can cause JES2 outages on multiple members of a MAS.| Ensure you read and understand the restriction in the JES2 Commands manual| before using this command.|

| ��─ ──$ZAPJOB ──┬ ┬───────────────── ──┬ ┬──────────────────── ──┬ ┬─────────────────── ────────────────────�| └ ┘──,JOBID=jjjnnnnn └ ┘──,JOBKEY=xxxxxxxxxx └ ┘──,JOBNAME=cccccccc

| �─ ──┬ ┬──────────────── ──┬ ┬──────────────── ─────────────────────────────────────────────────────────�!| └ ┘──,JQEINDEX=xxxx └ ┘──,JQEOFF=xxxxxx

56 OS/390 V2R10 JES2 Commands Summary

Page 67: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Appendix A. Notices

This information was developed for products and services offered in the USA.

IBM may not offer the products, services, or features discussed in this document inother countries. Consult your local IBM representative for information on the productsand services currently available in your area. Any reference to an IBM product,program, or service is not intended to state or imply that only that IBM product,program, or service may be used. Any functionally equivalent product, program, orservice that does not infringe any IBM intellectual property right may be used instead.However, it is the user's responsibility to evaluate and verify the operation of anynon-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter describedin this document. The furnishing of this document does not give you any license tothese patents. You can send license inquiries, in writing, to:

IBM Director of LicensingIBM CorporationNorth Castle DriveArmonk, NY 10504-1785USA

For license inquiries regarding double-byte (DBCS) information, contact the IBMIntellectual Property Department in your country or send inquiries, in writing, to:

IBM World Trade Asia CorporationLicensing2-31 Roppongi 3-chome, Minato-kuTokyo 106, Japan

The following paragraph does not apply to the United Kingdom or any othercountry where such provisions are inconsistent with local law: INTERNATIONALBUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS”WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states donot allow disclaimer of express or implied warranties in certain transactions, therefore,this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changesare periodically made to the information herein; these changes will be incorporated innew editions of the publication. IBM may make improvements and/or changes in theproduct(s) and/or the program(s) described in this publication at any time without notice.

Any references in this information to non-IBM Web sites are provided for convenienceonly and do not in any manner serve as an endorsement of those Web sites. The

Copyright IBM Corp. 1998, 2000 57

Page 68: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

materials at those Web sites are not part of the materials for this IBM product and useof those Web sites is at your own risk.

IBM may use or distribute any of the information you supply in any way it believesappropriate without incurring any obligation to you.

Licensees of this program who wish to have information about it for the purpose ofenabling: (i) the exchange of information between independently created programs andother programs (including this one) and (ii) the mutual use of the information which hasbeen exchanged, should contact:

IBM CorporationMail Station P3002455 South RoadPoughkeepsie, NY 12601-5400USAAttention: Information Request

Such information may be available, subject to appropriate terms and conditions,including in some cases, payment of a fee.

The licensed program described in this information and all licensed material availablefor it are provided by IBM under terms of the IBM Customer Agreement, IBMInternational Program License Agreement, or any equivalent agreement between us.

If you are viewing this information softcopy, the photographs and color illustrations maynot appear.

58 OS/390 V2R10 JES2 Commands Summary

Page 69: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

TrademarksThe following terms are trademarks of the IBM Corporation in the United States and/orother countries:

� AS/400 � IBM � IBMLink � MVS/ESA � OS/390 � S/370 � VTAM

Other company, product, and service names may be trademarks or service marks ofothers.

Appendix A. Notices 59

Page 70: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Communicating Your Comments to IBM

OS/390JES2 Commands Summary

Publication No. GX22-0041-06

If you especially like or dislike anything about this book, please use one of the methodslisted below to send your comments to IBM. Whichever method you choose, makesure you send your name, address, and telephone number if you would like a reply.

Feel free to comment on specific errors or omissions, accuracy, organization, subjectmatter, or completeness of this book. However, the comments you send should pertainto only the information in this manual and the way in which the information ispresented. To request additional publications, or to ask questions or make commentsabout the functions of IBM products or systems, you should talk to your IBMrepresentative or to your IBM authorized remarketer.

When you send comments to IBM, you grant IBM a nonexclusive right to use ordistribute your comments in any way it believes appropriate without incurring anyobligation to you.

If you are mailing a reader's comment form (RCF) from a country other than the UnitedStates, you can give the RCF to the local IBM branch office or IBM representative forpostage-paid mailing.

� If you prefer to send comments by mail, use the RCF at the back of this book.

� If you prefer to send comments by FAX, use this number:

– FAX: (International Access Code)+1+845+432-9405

� If you prefer to send comments electronically, use one of these network IDs:

– Internet e-mail: [email protected]– World Wide Web: http://www.ibm.com/s390/os390/webqs.html

Make sure to include the following in your note:

� Title and publication number of this book� Page number or topic to which your comment applies

Optionally, if you include your telephone number, we will be able to respond to yourcomments by phone.

Page 71: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Reader's Comments — We'd Like to Hear from You

OS/390JES2 Commands Summary

Publication No. GX22-0041-06

You may use this form to communicate your comments about this publication, its organization, orsubject matter, with the understanding that IBM may use or distribute whatever information you supplyin any way it believes appropriate without incurring any obligation to you. Your comments will be sentto the author's department for whatever review and action, if any, are deemed appropriate.

Note: Copies of IBM publications are not stocked at the location to which this form is addressed.Please direct any requests for copies of publications, or for assistance in using your IBM system, toyour IBM representative or to the IBM branch office serving your locality.

Today's date:

What is your occupation?

Newsletter number of latest Technical Newsletter (if any) concerning this publication:

How did you use this publication?

Is there anything you especially like or dislike about the organization, presentation, or writing in thismanual? Helpful comments include general usefulness of the book; possible additions, deletions, andclarifications; specific errors and omissions.

Page Number: Comment:

Name Address

Company or Organization

Phone No.

[ ] As an introduction [ ] As a text (student)

[ ] As a reference manual [ ] As a text (instructor)

[ ] For another purpose (explain)

Page 72: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

Cut or FoldAlong Line

Cut or FoldAlong Line

Reader's Comments — We'd Like to Hear from YouGX22-0041-06 IBM

Fold and Tape Please do not staple Fold and Tape

NO POSTAGENECESSARYIF MAILED IN THEUNITED STATES

BUSINESS REPLY MAILFIRST-CLASS MAIL PERMIT NO. 40 ARMONK, NEW YORK

POSTAGE WILL BE PAID BY ADDRESSEE

IBM CorporationDepartment 55JA, Mail Station P3842455 South RoadPoughkeepsie, NY 12601-5400

Fold and Tape Please do not staple Fold and Tape

GX22-0041-06

Page 73: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a
Page 74: JES2 Commands Summary - pudn.comread.pudn.com/downloads110/doc/454616/JES_Command_Overview.pdf · This book is intended for use by a system console operator who controls JES2 on a

IBM

Program Number: 5647-A01

Printed in the United States of Americaon recycled paper containing 10%recovered post-consumer fiber.

GX22-XX41-X6