jet engine ppt by sandeep yadav
TRANSCRIPT
![Page 1: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/1.jpg)
A PRESENTATION
ON JET ENGINE
KM. SHIVA KATIYARROLL NO.: CSJMA12001390289
MEE- 2K12
PRESENTED BY:
![Page 2: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/2.jpg)
Jet engines move the airplane forward with a great force that is produced by a tremendous thrust and causes the plane to fly very fast.
Thrust is the forward force that pushes the engine and therefore the airplane forward.
“A rearward channeled explosion can propel a machine forward at a great speed.”
Fig.1. Jet Engine [5]
Introduction
![Page 3: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/3.jpg)
Jet engine is nothing but a Gas turbine. It works under the principle of Newton’s third law It states that “For every acting force there is an equal and
opposite force”. Gas turbine operates like toy balloon
Fig.2. Toy balloon [1]
Working Principle
![Page 4: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/4.jpg)
Jet Propulsion
Operating principle based on Newton’s laws of motion.
Fig.3. Newton’s 3rd law of motion [1]
VinletVexit
Propulsive Efficiency ηp = Vinlet + Vexit
2Vinlet
Propulsion means to push forward or drive an object forward.
![Page 5: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/5.jpg)
History
DR . HANS VON OHAN SIR FRANK M. WHITTLE
Ohan’s jet was first to fly in 1939.
Frank’s jet flew first in 1941 however he had patent his idea in 1930.
![Page 6: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/6.jpg)
Parts of jet engine
FAN COMPRESSOR COMBUSTOR TURBINE MIXER NOZZLE Fig.4. Parts of jet engine [2]
![Page 7: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/7.jpg)
How a jet engine works ?
Fig.5. Working of jet engine [2]
“Strictly speaking, energy is not “consumed”, but rather is converted into different forms.”
![Page 8: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/8.jpg)
How air flows through the engine ?
Fig.6. Air flow through the engine [2]
The image above shows how the air flows through the engine. The air goes through the core of the engine as well as around the core. This causes some of the air to be very hot and some to be cooler. The cooler air then mixes with the hot air at the engine exit area.
![Page 9: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/9.jpg)
Continued . . .
AIR INTAKE
Sucked in by the compressor
COMPRESSOR
Compressor speed and temperature increases gradually
FUEL BURNER
Fuel is mixed with the air, and electric sparks light the air, causing it to combust.
COMBUSTION CHAMBER
The air is burnt. Increase in the temperature
of the air, thus increases the pressure inside the engine.
![Page 10: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/10.jpg)
Continued . . .
TURBINE
Works like a windmill The blades gain energy from the hot gases moving past them. This movement is used to power the compressor.
JET PIPE AND PROPELLING NOZZLE
The hot air rushes out of the nozzle. High pressure Hot air rushes out at very high speed
![Page 11: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/11.jpg)
Piston Engine vs Jet Engine
Unsteady flow
RATE OF MASS AND ENERGY FLOW IS NOT CONSTANT.
Steady flow
RATE OF FLOW OF MASS AND ENERGY IS CONSTANT.
Fig.7. Piston Engine [3] Fig.8. Gas turbine Engine [1]
![Page 12: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/12.jpg)
Combustion chamber
Propeller shaftWork output
Fuel
Compressor Turbine
workingGas Turbine Plant Layout
Air in Exhaust
Fig.9. Open cycle gas turbine [3]
Fuel(Heat)
Shaft
![Page 13: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/13.jpg)
Simplistic gas turbines working principles
1-2 Isentropic compression (in a compressor); h2-h1 = mCp(T2-T1)2-3 Constant pressure heat addition (in a combustor); h3-h2 = mCp(T3-T2)3-4 Isentropic expansion (in a turbine); h3-h4 = mCp(T3-T4)4-1 Constant pressure heat rejection
Fig.10. Ideal Brayton cycle [3]
![Page 14: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/14.jpg)
1. Turbojet
The turbojet engine is a reaction engine.
Substantial increases in thrust can be obtained by employing an afterburner
Types of Jet Engine
Fig.11. Turbojet [5]
![Page 15: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/15.jpg)
2. Turboprop
A turboprop engine is a jet engine attached to a propeller.
Modern turboprop engines are equipped with propellers that have a smaller diameter but a larger number of blades for efficient operation at much higher flight speeds
Fig.12. Turboprop [5]
![Page 16: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/16.jpg)
3. Turbofan
The objective of this sort of bypass system is to increase thrust without increasing fuel consumption.
It achieves this by increasing the total air-mass flow and reducing the velocity within the same total energy supply.
Fig.13. Turbofan [5]
![Page 17: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/17.jpg)
4. Ramjet
It has no moving parts.
Combustion occurs at subsonic speed of airflow. Guided-missile systems, in defense sector used this type of jet.
Fig.14. Ramjet [5]
Mach 0.8 to Mach 5, efficient at high speed (> Mach 2.0 )
![Page 18: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/18.jpg)
5. Scramjet
Scramjet (Supersonic Combustion Ramjet) A variant of Ramjet Air-breathing jet engine where combustion occurs in supersonic airflow.
Fig.15. Scramjet [5]
Few mechanical parts, can operate at very high Mach numbers (Mach 8 to 15) with good efficiencies.
![Page 19: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/19.jpg)
Air Temp.
Thru
st
Increasing AltitudeTh
rust
Troposphere
Stratosphere
Trop
opau
se
Factor Affecting Thrust
Flat Rating
Tft
Fig.16. Temp. effect on thrust [1]
Fig.17. Altitude effect on thrust [1]
![Page 20: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/20.jpg)
Thru
st
Pressure
Continued…
Fig.19. Pressure effect on thrust [1] Fig.20. Airspeed effect on thrust [1]
![Page 21: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/21.jpg)
Applications
IN AIRCRAFT- Fighter plane, Missiles, Rocket, Airplane. Jet propulsion, land and sea transport, racing car. The first use of the jet engine was to power military aircraft. The General electric company used a “turboprop” jet engine to
run an electric generator. The jet engine is not only used on aircraft but on boats, where
water jets are used to propel the boat forward. Normal type of jet engine is used for domestic purpose i.e.
Traveling, carrying goods etc.
![Page 22: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/22.jpg)
Advantages
High power to weight ratio.Very high speed therefore saves times.Mechanical efficiency of jet engine is high as compared to I.C. engine.
High fuel consumption. It is difficult to design a turbine that will work in high temperature with high speed.
Thermal efficiency of Jet engine is low compared to IC engine.
Disadvantages
![Page 23: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/23.jpg)
Conclusion
Jet engine works on laws of basic thermodynamics as steady flow energy equation and Brayton cycle empowering the thought that natural resources air can be used according to human mind for the benefit of world.
Ram type of jet engines is used only in Defence sector. Because it travels at supersonic speed and generally high level of training is required. Since it travels at such a high speed it cannot be used for traveling.
Net work output of a jet propulsion cycle is zero.
![Page 24: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/24.jpg)
Future Vision
To develop materials that can withstand extremely high temperatures and stresses required by more powerful engines.
Future engineers will find many opportunities to develop engines with increased efficiency, reduced mass, and exotic materials. New fuels, reduced noise, and reductions in pollution a wait further study, testing, and design.
As NASA seeks to return humans to space, as air travel continues to expand, and as humans seek to fly higher, faster, and farther, propulsion will play a major role in the design for the vehicles of the future.
“Engineers and engine designers are never content to stop “pushing the envelope” in aviation propulsion.”
![Page 25: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/25.jpg)
References
[1]. R.D. Flack, “Fundamentals of Jet Propulsion”, Cambridge University Press, 2005.
[2]. J.L. Kerrebrock, “Aircraft Engines and Gas Turbines”, MIT Press, 1992.
[3]. R.K. Rajput, “Thermal Engineering”, Laxmi Publications, 9th edition, 2013, 754-795.
[4]. Y. A. Cengel and M. A. Boles. “Thermodynamics”, Mc Graw Hill, 7th edition, 2011, 484-535, 844-893.
[5]. H.Cohen, G.F.C. Rogers, and H.I.H. Saravanamutto, “Gas Turbine Theory”, 5th edition, New York: Wiley, 2003.
![Page 26: JET ENGINE PPT BY SANDEEP YADAV](https://reader030.vdocument.in/reader030/viewer/2022012914/586f827b1a28ab54768b4691/html5/thumbnails/26.jpg)
Thank you