jhl catalogue version 3 - james healy ltd catalogue v3.pdf · james healy...

RÉAMHRÁ

Is é seo an tríu eagrán dár clár agus tá athru mórdéanta in ár stuc o cuirimear an céad eagránamach. Tá an eagran seo níos simplí agus tá lán dono hearaí a tracht aguinn ann.

Tá méadú taghtha ins na hearrraí tionscaliocht átaá trácht aguinn.

Táimuid i láther na huire ag trácht i TionscalSraid S. P. O’Cinneide, Baile Átha Cliath, igCorchaig agus i Luimneach.

Buníoch an comhlacht timpeall 1946 ag an t-UasalSéamus O’hÉalaithe agus bhí an céad monarchain inascal taoibh thiar do Rae an Iarthair i mBaileÁtha Cliath. Bhí an Comhlacht Corpraithe i 1966.

Táimuid ana bhuíoch do no comhlachtaí go léir atáag deanaimh gnó linn agus guímuís gach rath orthago léir.

James Healy (Brass-Founders-Engineers) Limited

Branches

Head Office - Dublin Southern Western

Naas Road Depot Cork Depot Limerick DepotUnit C & D, Monahan Road, Unit F2,John F. Kennedy Drive, Cork. Eastway Business and Ind. Park,John F. Kennedy Industrial Estate, Ballysimon Road,Bluebell, Limerick.Dublin 12.

Tel : + 353 (1) 419 4000Fax :+ 353 (1) 419 4017

Tel :+ 353 (0) 21 964 111Fax :+ 353 (0) 21 317 391

Tel :+ 353 (0) 61 316 850Fax :+ 353 (0) 61 315 107

Email : [email protected] Email : [email protected] Email : [email protected] www.jameshealy.ie www.jameshealy.ie

Registered in Ireland - Number 21020. Registered Office as Head Office.

James Healy (Brass-Founders-Engineers) Limited

General Notes

• All transactions are subject to our Conditions of Sale, copies of which are availableupon request.

• It is the user’s responsibility to ensure that materials supplied are suited to the

intended application as no liability for direct or consequential loss is accepted. • Great care has been taken to verify the accuracy of the information in this

catalogue. But the company will not accept responsibility for any errors it maycontain.

• All information contained in this catalogue is intended as a guide only. The

information is not intended for use by designers or where specific and detailed,exact and precise information is required.

• Stock sizes, ranges and specifications are subject to alteration without notice. • Non listed sizes and materials may be obtainable to order. Please contact us for

details. Some sections may be cut from sheet or plate. • Certified material is available to order and persons requiring Certificates of

Conformity should ask at time of order. Most of our existing stock can be suppliedwith a Letter of Conformity.

• Certified materials to the relevant International Standards. Some of the materialsare supplied with these certificates free of charge. Other materials incur anadditional charge for supplying these certificates. Please contact us for anyadditional information.

• Our stocks are subject to continuous review so please contact us if yourrequirement is not listed in this catalogue.

Third Edition31st October 2007.

1

JAMES HEALY((BBRRAASSSS- FFOOUUNNDDEERRSS--EENNGGIINNEEEERRSS))

LTD.

STOCK LIST3RD EDITION

DDUUBBLLIINN -- CCOORRKK -- LLIIMMEERRIICCKK

STOCKHOLDERS OFALUMINIUM – BRASS – BRONZE – COPPER – ZINC

NYLON – ACETAL – PTFE – ‘TUFNOL’ – ACRYLIC – POLYCARBONATEKEY STEEL – SILVER STEEL – CAST STEEL – CAST IRON – TINPLATE – SHIM

2

WAREHOUSE DUBLIN CORK LIMERICK

UNIT C, F2 EASTWAY BUSINESSADDRESS J.F. KENNEDY DRIVE, MONAHAN ROAD, PARK,

BLUEBELL, CORK BALLYSIMON ROAD,DUBLIN 12. LIMERICK.

TELEPHONE 01-419 4000 021-496 4111 061-316 850

TELEFAX 01-419 4017 021-431 7391 061-315 107

E-MAIL [email protected] [email protected] [email protected]

WEBSITE WWW.JAMESHEALY.IE

WAREHOUSESCONTACT

Drive inMcDonalds

Naas R

oad

To

Du

blin

Old

Naas R

oad

Kylemore Road

Kylemore Hotel

B.O.C.Gases

B.O.C.Gases

CumminsScrap

Joh

n F

. Ken

ned

y Drive

JA

ME

SH

EA

LY

LT

D.

3

JAMES HEALY((BBRRAASSSS-FFOOUUNNDDEERRSS--EENNGGIINNEEEERRSS))

LTD.

DUBLIN MAP

John Healy

Stamp

JAMESHEALYLTD.

River Lee

Albert Quay

ClontarfBridge

“New Bridge”

Alb

ert Street

Victo

ria Ro

ad

Albert Road

Eg

linto

n S

treet

CityHall

Victo

ria Ro

ad

Monahan Road

Shell Garage

Centre Park Road

4

JAMES HEALY((BBRRAASSSS- FFOOUUNNDDEERRSS--EENNGGIINNEEEERRSS))

LTD.

CORK MAP

P.J.MathewsPlumbing

NewTipperary Rd.

Old Tipperary Rd.Eastway Business

Park

LimerickMotorCentre

Eircom

PatKeoghGarage

LyonsFord

Garage

JAMESHEALYLTD.

ToLimerick

To

Wexfo

rd

To LimerickTo Dublin N7

BallysimonRoundabout

5

JAMES HEALY((BBRRAASSSS-FFOOUUNNDDEERRSS--EENNGGIINNEEEERRSS))

LTD.

LIMERICK MAP

6

CONTACT INFORMATION 2LOCATION MAPS

MAPS - DUBLIN 3CORK 4LIMERICK 5

ALUMINIUMBAR - ROUND 9

SQUARE 9RECTANGULAR 9

PROFILE - EQUAL ANGLE 10UNEQUAL ANGLE 10‘T’ PROFILE 10CHANNEL 10ANODISED CHANNEL 10CONVEX 10

TUBE - ROUND 11SQUARE 11RECTANGULAR 11

SHEET - SHEET 12PLATE 12ANOSISED 12WHITE-PAINTED 12TREADPLATE 12STUCCO 12COMPOSITE PANELS 13

RIVETS 13BRASS

BAR - ROUND 14THREADED ROUND 14HEXAGON 14SQUARE 15RECTANGULAR STRIP 15RECTANGULAR 16

PROFILE - CONVEX 16EQUAL ANGLE 17UNEQUAL ANGLE 17‘T’ PROFILE 17CHANNEL 17HANDRAIL 17STAIR NOSING 18

TUBE - ROUND 18SQUARE 19RECTANGULAR 19TRIANGULAR 19REEDED 19ROPE-TWIST 19DECORATIVE ROUND 19DECORATIVE SQUARE 19

CONTENTS

ITEM PAGE

7

BRASS CONT. PAGESHEET - SHEET 20

SOFT 20ENGRAVING 20HAMMERED 20PERFORATED 20

SHIM 21WIRE - ROUND 21

SQUARE 21FITTINGS 21CURTAIN RINGS 22PIANO HINGE 22WOVEN WIRE MESH 22DECORATIVE BEEDING 22RIVETS 23HEXAGON NUTS 23SCREWS 23CHAIN 23

BRONZEPHOSPHOR BRONZE BAR

- ROUND SOLID 24ROUND CORED 25SQUARE 26RECTANGULAR 26

PHOSPHOR BRONZE SHEET 26ALUMINIUM BRONZE ROD

- ROUND SOLID 26ROUND CORED 27

SELF-LUBRICATING BRONZE- BLANKS 27

BUSHES 27GILDING METAL

- SHEET 27ROUND TUBE 27

COPPERBAR - ROUND 28

SQUARE 28RECTANGULAR 29

BERYLLIUM COPPER 28CHROMIUM ZIRCONIUM COPPER 28CONDUCTOR TAPE 29WIRE 29SHEET - SHEET 30

ROOFING COILS 30GREEN-PATINATED 30SOFT 30HAMMERED 30PERFORATED 30

TUBE 31WOVEN WIRE MESH 31DECORATIVE BEEDING 31RIVETS 31

8

PLASTIC & LAMINATE PAGENYLON - WHITE ROUND ROD 32

BLACK ROUND ROD 32WHITE RECTANGULAR BAR 32WHITE SQUARE BAR 32WHITE SHEET 33

ACETAL - ROUND ROD 33SHEET 33

P.T.F.E. - ROUND ROD 34COIL 34SHEET 34

ACRYLIC - SHEET 35POLYCARBONATE- SHEET 35PVC - SHEET 35TUFNOL - ROUND ROD 36

SHEET 36SELECTION CHART 37

STEELKEY STEEL - SQUARE BAR 38

RECTANGULAR BAR 38SILVER STEEL - ROUND ROD 38CHISEL STEEL - ROUND ROD 39

HEXAGON BAR 39OCTAGON BAR 39

GIB HEAD TAPER KEYS 39CAST IRON - SOLID ROUND ROD 40

CORED ROUND ROD 40TINPLATE SHEET 40SHIM 40STAINLESS STEEL

- ROUND ROD (CORK ONLY) 41SHEETS (CORK ONLY) 42ROUND TUBE 42FITTINGS 42

ZINCSHEET 43

NICKEL SILVERDECORATIVE BEADING 43

FINISHING MATERIALPOLISH BARS 44POLISH MOPS 44

SERVICES 44

9

5MM 15MM 35MM 65MM 95MM 180MM 260MM

6MM 16MM 40MM 70MM 100MM 210MM 280MM

8MM 20MM 45MM 75MM 130MM 220MM 310MM

10MM 25MM 50MM 85MM 150MM 230MM 350MM

1/2” 30MM 60MM 90MM 160MM 250MM 400MM

8 X 8MM 20 X 20MM 40 X 40MM 65 X 65MM 100 X 100MM


12 X 12MM 30 X 30MM 50 X 50MM

12 X 3MM 20 X 5MM 20 X 8MM 25 X 12MM 40 X 20MM15 X 3MM 25 X 5MM 25 X 8MM 40 X 12MM 50 X 20MM20 X 3MM 30 X 5MM 20 X 10MM 50 X 12MM 60 X 20MM25 X 3MM 40 X 5MM 25 X 10MM 80 X 12MM 80 X 20MM30 X 3MM 50 X 5MM 40 X 10MM 100 X 12MM 100 X 20MM40 X 3MM 20 X 6MM 50 X 10MM 150 X 12MM 150 X 20MM50 X 3MM 25 X 6MM 70 X 10MM 50 X 15MM 40 X 25MM60 X 3MM 30 X 6MM 80 X 10MM 80 X 15MM 50 X 25MM70 X 3MM 40 X 6MM 100 X 10MM 100 X 15MM 100 X 25MM80 X 3MM 50 X 6MM 150 X 10MM 150 X 15MM 150 X 25MM

100 X 3MM 80 X 6MM 150 X 40MM100 X 6MM 100 X 50MM

150 X 50MM150 X 100MM

JAMES HEALY ( ) LTD.BRASS- FOUNDERS-ENGINEERS

ALLUMMINNIUMM STOCKK LLIST

FREE-MACHINING ALUMINIUM ROUND RODDIAMETERS IN STOCK

ALUMINIUM SQUARE BARSIZES IN STOCK

ALUMINIUM RECTANGULAR BARSIZES IN STOCK

James

Hea

ly Lim

ited

ALUMINIUM ‘U’ CHANNELSIZES IN STOCK

10

12 X 12 X 2.00MM 1/2”X 1/2” X 1/8” 40 X 40 X 5.00MM

20 X 20 X 1.50MM 20 X 20 X 3.00MM 50 X 50 X 5.00MM

25 X 25 X 1.50MM 25 X 25 X 3.00MM 1” X 1” X 1/4”

30 X 30 X 2.00MM 30 X 30 X 3.00MM 40 X 40 X 6.00MM

40 X 40 X 2.00MM 40 X 40 X 3.00MM 50 X 50 X 6.00MM

2” X 2” X 1/16” 50 X 50 X 3.00MM 80 X 80 X 6.00MM

30 X 25 X 3.00MM 40 X 25 X 3.00MM 50 X 25 X 3.00MM

20 X 20 X 3MM 25 X 25 X 3MM

1/2” X 1/2” X 1/2” X 1/16” 25 X 25 X 25 X 3MM

20 X 20 X 20 X 3MM 1” X 1.1/2” X 1” X 1/8”

20 X 20 X 20 X 1.50MM

19 X 3.50MM

ALUMINIUM EQUAL ANGLESIZES IN STOCK

ALUMINIUM UNEQUAL ANGLESIZES IN STOCK

ALUMINIUM ‘T’ PROFILESIZES IN STOCK

ANODISED ALUMINIUM ‘U’ CHANNELSIZE IN STOCK

ALUMINIUM CONVEXSIZE IN STOCK

James

Hea

ly Lim

ited

ALUMINIUM TUBESIZES IN STOCK

6 X 1.00MM 15 X 15 X 1.50MM 50 X 25 X 3.00MM

8 X 1.00MM 20 X 20 X 1.50MM 50 X 40 X 3.00MM

10 X 1.00MM 25 X 25 X 1.50MM 60 X 40 X 3.00MM

12 X 1.00MM 25 X 25 X 3.00MM 100 X 50 X 3.00MM

15 X 1.50MM 30 X 30 X 3.00MM

20 X 1.50MM 40 X 40 X 3.00MM

25 X 1.50MM 50 X 50 X 3.00MM

28 X 1.50MM

30 X 1.50MM

40 X 1.50MM

50 X 1.50MM

25 X 3.00MM

30 X 3.00MM

40 X 3.00MM

50 X 3.00MM

60 X 3.00MM

80 X 3.00MM

100 X 3.00MM

50 X 6.00MM

11

ROUND SQUARE RECTANGULAR

(OUTSIDE X WALL) (OUTSIDE X WALL) (OUTSIDE X WALL)



INDUBLIN – CORK – LIMERICK

James

Hea

ly Lim

ited

0.50MM 0.60MM 0.80MM 1.00MM 1.20MM 1.50MM

1.00MM 1.20MM 1.50MM 2.00MM 3.00MM 6.00MM

2.00MM 3.00MM 5.00MM

6.00MM

12

2000 X 1000MM 2500 X 1250MM

2000 X 1000 X 1.50MM 2500 X 1250 X 1.50MM

8.00MM 10.00MM 12.00MM 15.00MM 20.00MM

25.00MM 30.00MM 40.00MM 50.00MM

ALUMINIUM SHEETSIZES IN STOCK

ANODISED ALUMINIUM SHEETSIZES IN STOCK

ALUMINIUM PLATESIZES IN STOCK

2438 X 1219 X 1.10MM 3000 X 1500 X 1.50MM

2500 X 1250 X 1.80MM

WHITE-PAINTED ALUMINIUM SHEETSIZES IN STOCK

2500 X 1250 X 2.00/3.50MM 2500 X 1250 X 3.00/4.50MM

2500 X 1250 X 4.50/6.00MM

ALUMINIUM TREADPLATESIZES IN STOCK

2000 X 1000MM

2000 X 1000 X 0.80MM

STUCCO ALUMINIUM SHEETSIZE IN STOCK

James

Hea

ly Lim

ited

1/2” X 1/8” 1/2” X 1/8” 1/2” X 1/8”1/2” X 3/16” 1/2” X 3/16” 1/2” X 3/16”3/4” X 3/16”1/2” X 1/4”

13




ROUND-HEAD FLAT-HEAD COUNTERSUNK-HEAD

SHAFT LENGTH X DIA SHAFT LENGTH X DIA OVERALL LENGTH X DIA

ALUMINIUM RIVETSSIZES IN STOCK




TELEPHONE 01-419 4000 021-496 4111 061-316 850

TELEFAX 01-419 4017 021-431 7391 061-315 107



AVAILABLE EX-STOCK

2440 X 1220 X 3.00MM 3000 X 1500 X 3.00MM

ALUMINIUM COMPOSITE PANELSSIZES IN STOCK

James

Hea

ly Lim

ited

14


2MM 5/16” 15MM 25MM 45MM 4”3MM 8MM 5/8” 1” 1.7/8” 130MM9/64” 11/32” 16MM 27MM 50MM 6”4MM 9MM 17MM 28MM 5” 8”

11/64” 3/8” 11/16” 1.1/8” 2.1/4” 10”3/16” 10MM 19MM 30MM 60MM 300MM5MM 7/16” 3/4” 1.1/4” 2.1/2”7/32” 12MM 20MM 35MM 65MM6MM 1/2” 13/16” 1.1/2” 2.3/4”1/4” 13MM 22MM 40MM 70MM7MM 14MM 7/8” 1.5/8” 3”9/32” 9/16” 24MM 1.3/4” 90MM

BBRASS STOCKK LLIST

BRASS ROUND RODDIAMETERS IN STOCK

4MM 5MM 6MM 8MM 10MM 12MM 1/2”

BRASS THREADED ROUND RODDIAMETERS IN STOCK

3MM 3/8” 5/8” 22MM 32MM 50MM3/16” 10MM 16MM 7/8” 35MM 2”5MM 7/16” 17MM 0.920” 36MM 2.1/4”7/32” 12MM 11/16” 24MM 1.1/2” 60MM6MM 1/2” 18MM 25MM 40MM 2.1/2”1/4” 13MM 19MM 1” 1.5/8” 2.3/4”

9/32” 14MM 3/4” 1.1/16” 42MM 3”5/16” 9/16” 20MM 1.1/8” 1.3/4” 4”8MM 15MM 13/16” 30MM 45MM

11/32” 0.600” 0.820” 1.1/4” 1.78”

BRASS HEXAGONSIZES IN STOCK

James

Hea

ly Lim

ited

15




TELEPHONE 01-419 4000 021-496 4111 061-316 850

TELEFAX 01-419 4017 021-431 7391 061-315 107



AVAILABLE EX-STOCK

3 X 3MM 12 X 12MM 1” X 1”

3/16” X 3/16” 1/2” X 1/2” 1.1/4” X 1.1/4”

5 X 5MM 15 X 15MM 1.1/2” X 1.1/2”

1/4” X 1/4” 5/8” X 5/8” 40 X 40MM

5/16” X 5/16” 3/4” X 3/4” 2” X 2”

3/8” X 3/8” 20 X 20MM 65 X 65MM

10 X 10MM 7/8” X 7/8” 3” X 3”

4” X 4”

BRASS SQUARE BARSIZES IN STOCK

150 X 1.20MM 25 X 1.50MM 50 X 1.50MM

12 X 1.50MM 30 X 1.50MM 65 X 1.50MM

20 X 1.50MM 40 X 1.50MM 75 X 1.50MM

BRASS RECTANGULAR STRIPSIZES IN STOCK




James

Hea

ly Lim

ited

16

6 X 3MM 12 X 5MM 16 X 10MM 25 X 20MM10 X 3MM 20 X 5MM 20 X 10MM 40 X 20MM12 X 3MM 25 X 5MM 25 X 10MM 50 X 20MM16 X 3MM 30 X 5MM 30 X 10MM 80 X 20MM20 X 3MM 40 X 5MM 40 X 10MM 100 X 20MM22 X 3MM 50 X 5MM 50 X 10MM 150 X 20MM25 X 3MM 80 X 5MM 65 X 10MM30 X 3MM 100 X 5MM 80 X 10MM 30 X 25MM40 X 3MM 100 X 10MM 40 X 25MM45 X 3MM 10 X 6MM 150 X 10MM 50 X 25MM50 X 3MM 12 X 6MM 65 X 25MM 60 X 3MM 20 X 6MM 20 X 12MM 75 X 25MM65 X 3MM 25 X 6MM 25 X 12MM 100 X 25MM70 X 3MM 30 X 6MM 30 X 12MM 150 X 25MM75 X 3MM 40 X 6MM 40 X 12MM

100 X 3MM 50 X 6MM 50 X 12MM 50 X 30MM150 X 3MM 60 X 6MM 65 X 12MM

65 X 6MM 80 X 12MM 50 X 40MM80 X 6MM 100 X 12MM 150 X 40MM

100 X 6MM 150 X 12MM150 X 6MM 65 X 50MM

50 X 15MM 80 X 50MM25 X 8MM 100 X 50MM

25 X 16MM 150 X 50MM40 X 16MM

4” X 3” .

BRASS RECTANGULAR BARSIZES IN STOCK

10 X 5MM 12 X 5MM 20 X 5MM 25 X 5MM

BRASS CONVEX PROFILESIZES IN STOCK

James

Hea

ly Lim

ited

17

12 X 12 X 1.50MM 12 X 12 X 3MM 25 X 25 X 5MM20 X 20 X 1.50MM 16 X 16 X 3MM 30 X 30 X 5MM25 X 25 X 1.50MM 20 X 20 X 3MM 40 X 40 X 5MM30 X 30 X 1.50MM 22 X 22 X 3MM 50 X 50 X 5MM40 X 40 X 1.50MM 25 X 25 X 3MM50 X 50 X 2.00MM 28 X 28 X 3MM 1” X 1” X 1/4”.

30 X 30 X 3MM 30 X 30 X 6MM35 X 35 X 3MM 40 X 40 X 6MM40 X 40 X 3MM 45 X 45 X 6MM 45 X 45 X 3MM 50 X 50 X 6MM47 X 47 X 3MM 3” X 3” X 1/4”.50 X 50 X 3MM60 X 60 X 3MM75 X 75 X 3MM

BRASS EQUAL ANGLESIZES IN STOCK

50 X 15MM 76 X 32MM

BRASS HANDRAIL PROFILESIZES IN STOCK

12 X 12 X 3MM 20 X 20 X 3MM 25 X 25 X 3MM 30 X 30 X 5MM

BRASS ‘T’ PROFILESIZES IN STOCK

25 X 12 X 3MM 50 X 25 X 3MM 75 X 50 X 3MM

40 X 25 X 3MM 50 X 40 X 3MM

BRASS UNEQUAL ANGLESIZES IN STOCK

12 X 12 X 12 X 1.50MM 20 X 20 X 20 X 3.00MM

12 X 12 X 12 X 3.00MM 25 X 25 X 25 X 3.00MM

BRASS ‘U’ CHANNELSIZES IN STOCKJa

mes H

ealy

Limite

d

18

42 X 20 X 2.50MM 40 X 23 X 3.00MM

BRASS STAIR NOSINGSIZES IN STOCK

2 X 0.50MM 3/4 X 1/8” . 2.1/4” X 16SWG3 X 0.50MM 20 X 1.20MM 2.1/4” X 1/8” .4 X 0.50MM

1” X 16SWG 2.1/2” X 16SWG3/16” X 22SWG 1” X 1/8” . 2.1/2” X 1/8” .

5 X 1.00MM 2.1/2” X 1/4” .28 X 1.50MM 2.1/2” X 1/2” .

6 X 1.00MM 1.1/8” X 16SWG1/4” X 20SWG 3” X 16SWG

1.1/4” X 16SWG 75 X 3.00MM5/16” X 20SWG 1.1/4” X 1/8” .

8 X 0.90MM 3.1/4” X 16SWG1.3/8” X 16SWG

3/8” X 16SWG 3.1/2” X 16SWG10 X 1.25MM 1.1/2” X 16SWG 3.1/2” X 1/8” .

1.1/2” X 1/8” .1/2” X 18SWG 4” X 16SWG1/2” X 1/8” . 1.3/4” X 16SWG

45 X 3.00MM5/8” X 18SWG

2” X 18SWG2” X 16SWG50 X 3.00MM2” X 1/4” .

BRASS ROUND TUBESIZES IN STOCK




O/D X WALL

James

Hea

ly Lim

ited

19

10 X 10 X 1.20MM 20 X 20 X 1.50MM 50 X 50 X 1.50MM

10 X 10 X 1.50MM 25 X 25 X 1.50MM 2” X 2” X 1/8” .

12 X 12 X 1.50MM 30 X 30 X 1.50MM

16 X 16 X 1.50MM 40 X 40 X 1.50MM

BRASS SQUARE TUBESIZES IN STOCK

25 X 12 X 1.50MM 50 X 30 X 1.50MM

BRASS RECTANGULAR TUBESIZES IN STOCK

27 X 20 X 20 X 1MM

BRASS TRIANGULAR TUBESIZE IN STOCK

25MM O/D X 1.00MM 38MM O/D X 1.00MM 50MM O/D X 0.80MM

BRASS REEDED TUBESIZES IN STOCK


BRASS ROPE-TWIST TUBESIZES IN STOCK

13MM O/D X 0.70MM

BRASS DECORATIVE ROUND TUBESIZE IN STOCK

25 X 25 X 1MM

BRASS DECORATIVE SQUARE TUBESIZE IN STOCK

James

Hea

ly Lim

ited

20

0.50MM 1.00MM 2.00MM 4.00MM 8.00MM

0.70MM 1.20MM 2.50MM 5.00MM 10.00MM

0.80MM 1.50MM 3.00MM 6.00MM 12.00MM

BRASS SHEETSIZES IN STOCK

2000 X 1000MM

2000 X 1000 X 0.50MM

BRASS SOFT SHEETSIZE IN STOCK

BRASS ENGRAVING SHEETSIZES IN STOCK

1200 X 600MM

1.50MM 2.00MM 3.00MM

2000 X 1000 X 0.70MM

BRASS ‘HAMMERED’ SHEETSIZE IN STOCK

BRASS PERFORATED SHEETTYPES IN STOCK

2000 X 1000MM X 0.90MM

‘SMALL” CLUB ‘LARGE’ CLUB CLUB AND ROUND HOLE




James

Hea

ly Lim

ited

21

MIXED MIXED MIXED

0.001” 0.001”

0.002” 0.002” 0.002”

0.003” 0.003” 0.003”

0.004” 0.004” 0.004”

0.005” 0.005” 0.005”

0.006” 0.006” 0.006”

0.007” 0.007”

0.008” 0.008” 0.008”

0.010” 0.010” 0.010”

0.012” 0.012” 0.012”

0.015” 0.015” 0.015”

0.020” 0.020” 0.020”

0.025” 0.025” 0.025”

SHIMSIZES IN STOCK

0.50MM 0.70MM 1.00MM 1.20MM 1.50MM 2.00MM 2.50MM 3.00MM

BRASS ROUND WIREDIAMETERS IN STOCK

1.50 X 1.50MM

BRASS SQUARE WIRESIZE IN STOCK

FULL RANGE OF BRASS FITTINGS FOR ARCHITECTURAL USE ANDFOR BRASS BEDS

BRASS FITTINGSIN STOCK

BRASS MILD STEEL STAINLESS STEEL

James

Hea

ly Lim

ited

22

1” 1.1/2” 2” 2.1/2” 3” 3.1/2”

BRASS CURTAIN RINGSSIZES IN STOCK

RINGS TO SUIT TUBE OUTER DIAMETERS

19 X 19MM

BRASS PIANO HINGESIZE IN STOCK

MESH NUMBER WIRE DIA.

13 0.40MM40 0.26MM

BRASS WOVEN WIRE MESHSIZES IN STOCK

ADAM 13.00 X 2.30MM GADROON 5.00 X 2.00MM

BAUBLE 7.80 X 4.60MM IVY LEAF 10.00 X 3.00MM

CELTIC 4.85 X 1.40MM PELMET 8.30 X 3.30MM

CELTIC 6.35 X 1.90MM READ LEAF WIRE 5.50 X 2.60MM

CELTIC 10.00 X 2.00MM READ + RIBBON 6.00 X 2.00MM

DIAMOND/PYRAMID 10.00 X 3.00MM READ + RIBBON 6.50 X 3.00MM

FACET WIRE 6.35 X 2.85MM STAR 10.00 X 2.00MM

FLAT-BACKED BEAD 6.35 X 3.00MM

FLAT-BACKED BEAD 8.00 X 3.00MM

BRASS DECORATIVE BEADINGDESIGNS + SIZES IN STOCK




James

Hea

ly Lim

ited

23

1/2” X 1/8” 1/2” X 1/8” 1/2” X 1/8”1/2” X 3/16” 1/2” X 3/16” 1/2” X 3/16”1/2” X 1/4” 1/2” X 1/4”

BRASS RIVETSSIZES IN STOCK

ROUND-HEAD FLAT-HEAD COUNTERSUNK-HEADSHAFT LENGTH X DIA SHAFT LENGTH X DIA OVERALL LENGTH X DIA

4MM 5MM 6MM 8MM 10MM 12MM

BRASS DOME-HEAD HEXAGON NUTSSIZES IN STOCK

3/4” NO. 8

BRASS MIRROR SCREWSSIZES IN STOCK

3/8” X 16SWG 5/8” X 13SWG 1” X 11SWG

1/2” X 16SWG 3/4” X 12SWG 1.1/4” X 9SWG

BRASS OVAL LINK CHAINSIZES IN STOCK

10 METRE COILS




James

Hea

ly Lim

ited

24


BBRONNZEE STOCKK LLIST




8MM 31MM 61MM 101MM 151MM 280MM

10MM 33MM 66MM 106MM 160MM 312MM

13MM 36MM 71MM 111MM 171MM

16MM 38MM 76MM 116MM 180MM

19MM 41MM 81MM 121MM

BRONZE ROUND RODDIAMETERS IN STOCK




TELEPHONE 01-419 4000 021-496 4111 061-316 850

TELEFAX 01-419 4017 021-431 7391 061-315 107



AVAILABLE EX-STOCK




James

Hea

ly Lim

ited

25

9 X 21MM 29 X 91MM 49 X 91MM 69 X 101MM 99 X 141MM9 X 26MM 34 X 46MM 49 X 96MM 69 X 106MM 99 X 151MM

14 X 26MM 34 X 51MM 49 X 101MM 69 X 111MM 99 X 161MM14 X 31MM 34 X 56MM 49 X 106MM 69 X 121MM 100 X 200MM14 X 36MM 34 X 61MM 49 X 111MM 69 X 141MM 109 X 131MM14 X 41MM 34 X 66MM 49 X 121MM 69 X 151MM 109 X 141MM14 X 46MM 34 X 71MM 49 X 131MM 74 X 86MM 109 X 151MM14 X 51MM 34 X 76MM 49 X 151MM 74 X 91MM 110 X 180MM19 X 31MM 39 X 51MM 54 X 66MM 74 X 96MM 119 X 141MM19 X 36MM 39 X 56MM 54 X 71MM 74 X 101MM 119 X 151MM19 X 41MM 39 X 61MM 54 X 81MM 74 X 106MM 120 X 160MM19 X 46MM 39 X 66MM 54 X 91MM 74 X 111MM 120 X 170MM19 X 51MM 39 X 71MM 59 X 71MM 74 X 126MM 120 X 200MM19 X 56MM 39 X 76MM 59 X 76MM 74 X 141MM 120 X 230MM19 X 61MM 39 X 81MM 59 X 81MM 74 X 151MM 129 X 151MM24 X 36MM 39 X 86MM 59 X 86MM 79 X 101MM 130 X 200MM24 X 41MM 39 X 91MM 59 X 91MM 79 X 106MM 130 X 300MM24 X 46MM 39 X 101MM 59 X 96MM 79 X 111MM 135 X 165MM24 X 51MM 39 X 111MM 59 X 101MM 79 X 121MM 140 X 170MM24 X 56MM 39 X 121MM 59 X 111MM 79 X 131MM 140 X 180MM24 X 61MM 39 X 131MM 59 X 121MM 79 X 141MM 150 X 170MM24 X 66MM 44 X 56MM 59 X 131MM 79 X 151MM 150 X 180MM24 X 76MM 44 X 61MM 59 X 141MM 89 X 121MM 150 X 200MM29 X 41MM 44 X 66MM 64 X 76MM 89 X 131MM 150 X 230MM29 X 46MM 44 X 71MM 64 X 81MM 89 X 141MM 150 X 260MM29 X 51MM 44 X 76MM 64 X 86MM 89 X 151MM 170 X 230MM29 X 56MM 49 X 61MM 64 X 91MM 90 X 160MM 170 X 240MM29 X 61MM 49 X 66MM 64 X 96MM 90 X 170MM 170 X 250MM29 X 64MM 49 X 71MM 64 X 106MM 90 X 180MM 170 X 280MM29 X 66MM 49 X 76MM 69 X 81MM 99 X 116MM 190 X 240MM29 X 71MM 49 X 81MM 69 X 86MM 99 X 121MM 200 X 260MM29 X 76MM 49 X 86MM 69 X 91MM 99 X 126MM 200 X 310MM29 X 81MM 69 X 96MM 99 X 131MM 220 X 330MM

230 X 350MM240 X 280MM

BRONZE CORED ROUND RODSIZES IN STOCK

I/D X O/D

James

Hea

ly Lim

ited

26

10 X 10MM 15 X 15MM 20 X 20MM 50 X 50MM

PHOSPHOR BRONZE SQUARE BARSIZES IN STOCK





50 X 6MM 40 X 10MM 80 X 12MM 82 X 22MM

PHOSPHOR BRONZE RECTANGULAR BARSIZES IN STOCK

2000 X 300MM 2000 X 600MM

1MM

2MM

3MM 3MM

4MM 4MM

5MM 5MM

6MM 6MM

10MM

PHOSPHOR BRONZE SHEETSIZES IN STOCK

20MM 41MM 65MM 81MM 131MM



ALUMINIUM BRONZE ROUND RODSIZES IN STOCK




James

Hea

ly Lim

ited

27

I/D X O/D

29 X 51MM 49 X 101MM 89 X 131MM

34 X 76MM 69 X 101MM 99 X 151MM

ALUMINIUM BRONZE CORED ROUND RODSIZES IN STOCK

BLANKS IN STOCK BUSHES IN STOCK

DIAMETER I/D X O/D

3/8” 28MM 1.1/2” 10 X 16MM 22 X 28MM1/2” 30MM 2” 12 X 18MM 25 X 32MM5/8” 1.1/4” 56MM 16 X 22MM 32 X 40MM

20MM 35MM 68MM 18 X 25MM 35 X 45MM70MM 20 X 25MM 40 X 46MM

105MM

SELF-LUBRICATING BRONZESIZES IN STOCK

GILDING METAL SHEETSIZES IN STOCK

1200 X 600MM 2000 X 1000MM

3.00MM 0.70MM 1.00MM 2.00MM

1.50MM 3.00MM


GILDING METAL ROUND TUBESIZES IN STOCK




James

Hea

ly Lim

ited

28

5MM 16MM 35MM 80MM

6MM 20MM 40MM 90MM

8MM 22MM 45MM 100MM


12MM 30MM 65MM

6MM 16MM 40MM 60MM 80MM8MM 20MM 50MM 65MM 85MM

10MM 25MM 55MM 70MM 95MM13MM 30MM 110MM


COPPPPEER STOCKK LLIST

COPPER ROUND RODDIAMETERS IN STOCK

BERYLLIUM COPPER ROUND RODSIZES IN STOCK

13MM 16MM 19MM 25MM

CHROMIUM ZIRCONIUM COPPER ROUND RODSIZES IN STOCK

6 X 6MM 20 X 20MM 50 X 50MM 100 X 100MM10 X 10MM 25 X 25MM 60 X 60MM 150 X 150MM12 X 12MM 30 X 30MM 80 X 80MM15 X 15MM 40 X 40MM

COPPER SQUARE BARSIZES IN STOCK




James

Hea

ly Lim

ited

29

12 X 3MM 12 X 6MM 20 X 10MM 25 X 12MM

16 X 3MM 20 X 6MM 25 X 10MM 40 X 12MM

20 X 3MM 25 X 6MM 30 X 10MM 50 X 12MM

30 X 3MM 30 X 6MM 40 X 10MM 60 X 12MM

40 X 3MM 40 X 6MM 50 X 10MM 80 X 12MM

50 X 3MM 50 X 6MM 60 X 10MM 100 X 12MM

60 X 6MM 80 X 10MM 150 X 12MM

12 X 5MM 80 X 6MM 100 X 10MM

20 X 5MM 100 X 6MM 150 X 10MM 20 X 15MM

25 X 5MM 160 X 10MM 100 X 20MM

30 X 5MM 150 X 20MM

40 X 5MM 40 X 25MM

50 X 5MM 50 X 25MM

60 X 5MM 100 X 25MM

80 X 5MM 150 X 25MM

100 X 5MM 60 X 40MM

150 X 40MM

150 X 50MM

COPPER RECTANGULAR BARSIZES IN STOCK

WIDTH THICKNESS LENGTH COIL WEIGHT(MM) (MM) (METERS) (APPX KGS)

25 3.00 75 50

COPPER SOFT CONDUCTOR TAPESIZE IN STOCK

0.70MM 1.00MM 1.20MM 1.50MM 2.00MM 2.50MM 3.00MM

COPPER ROUND WIREDIAMETERS IN STOCK

James

Hea

ly Lim

ited

30

WIDTH THICKNESS COIL WEIGHT COIL WEIGHT(MM) (MM) (APPX KGS) (APPX METERS)

600 0.55 51 17.00750 0.55 51 13.62900 0.55 51 11.35

COPPER ROOFING COILSSIZES IN STOCK

2000 X 1000MM

0.50MM 1.00MM 2.50MM 5.00MM0.70MM 1.20MM 3.00MM 6.00MM0.80MM 1.50MM 4.00MM 10.00MM0.90MM 2.00MM

COPPER SHEETSIZES IN STOCK

2000 X 1000 X 0.60MM

COPPER GREEN-PATINATED SHEETSIZE IN STOCK

2000 X 1000 X 0.50MM

COPPER SOFT SHEETSIZE IN STOCK

2000 X 1000 X 0.70MM

COPPER ‘HAMMERED’ SHEETSIZE IN STOCK

‘CLUB’ PATTERN

2000 X 1000 X 0.90MM

COPPER PERFORATED SHEETSIZE IN STOCKJa

mes H

ealy

Limite

d

ROUND-HEADSHAFT LENGTH X DIA

FLAT-HEADSHAFT LENGTH X DIA

COUNTERSUNK-HEADOVERALL LENGTH X DIA

DOME-HEADBLIND (POP)

1/2” X 1/8”

1/2” X 1/8”

1/2” X 1/8”

3.2 X 5.3MM

1/2” X 3/16”

1/2” X 3/16”

1/2” X 3/16”

1/2” X 1/4”

31

MESH NUMBER WIRE DIA.

100 0.11MM60 0.17MM37 0.26MM30 0.26MM12 0.45MM

COPPER WOVEN WIRE MESHSIZES IN STOCK

DIAMOND 9.50 X 3.30MM FRENCH GADROON 8.80 X 2.50MM

EDGE WIRE CONVEX 3.80 X 2.60MM GRAPE + GADROON 7.90 X 3.65MM

FLAT BACKED BEAD 6.35 X 2.34MM REED + LEAF 6.35 X 2.65MM

FRENCH GADROON 6.00 X 1.80MM STRAIGHT GADROON 7.90 X 2.25MM

FRENCH GADROON 8.00 X 1.90MM

COPPER DECORATIVE BEADING / STRIPDESIGNS + SIZES IN STOCK

COPPER RIVETSSIZES IN STOCK

COPPER ROUND TUBESIZE IN STOCK

O/D X WALL

28 X 1.50MM

James

Hea

ly Lim

ited

32

10MM 40MM 80MM 150MM 280MM16MM 45MM 90MM 160MM 300MM20MM 50MM 100MM 170MM 310MM22MM 60MM 110MM 180MM 350MM25MM 65MM 120MM 200MM 400MM30MM 70MM 130MM 230MM36MM 75MM 140MM 250MM


PPLLASTIC & LLAMMINNATEESTOCKK LLIST

WHITE NYLON ROUND RODDIAMETERS IN STOCK

15MM 36MM 60MM 90MM 140MM16MM 40MM 65MM 100MM 150MM20MM 45MM 70MM 110MM 180MM25MM 50MM 75MM 120MM30MM 55MM 80MM 130MM

BLACK NYLON ROUND RODDIAMETERS IN STOCK


20 X 10MM 50 X 25MM

WHITE NYLON RECTANGULAR BARSIZES IN STOCK

20 X 20MM 25 X 25MM 40 X 40MM

WHITE NYLON SQUARE BARSIZES IN STOCK

James

Hea

ly Lim

ited

33

2000 X 1000MM

1.00MM 3MM 8MM 16MM 30MM1.50MM 5MM 10MM 20MM 40MM2.00MM 6MM 12MM 25MM 50MM

WHITE NYLON SHEETSIZES IN STOCK








WHITE ACETAL ROUND RODDIAMETERS IN STOCK

2000 X 1000 X 3MM 3000 X 600 X 8MM 2000 X 1000 X 30MM

2000 X 1000 X 5MM 3000 X 600 X 10MM

2000 X 1000 X 6MM 3000 X 600 X 12MM

3000 X 600 X 16MM

3000 X 600 X 20MM

3000 X 600 X 25MM

WHITE ACETAL SHEETSIZES IN STOCK




James

Hea

ly Lim

ited

1.00MM 1.50MM 2.00MM 2.50MM 3.00MM

34




10MM 35MM 70MM 100MM 170MM

12MM 40MM 75MM 115MM 200MM

16MM

P.T.F.E. ROUND RODDIAMETERS IN STOCK

P.T.F.E. COILSIZES IN STOCK

3000 X 1200MM

P.T.F.E. SHEETSIZES IN STOCK

1200 X 1200MM




TELEPHONE 01-419 4000 021-496 4111 061-316 850

TELEFAX 01-419 4017 021-431 7391 061-315 107



AVAILABLE EX-STOCK


James

Hea

ly Lim

ited

35

2000 X 1000MM 1500 X 273MM

3MM5MM 5MM6MM

CLEAR POLYCARBONATE SHEETSIZES IN STOCK

2000 X 1000MM

CLEAR COLOUR

3MM 3MM5MM 5MM6MM 6MM8MM

10MM12MM

ACRYLIC SHEETSIZES IN STOCK

2348 X 1219 X 3MM 2438 X 1219 X 6MM

PVC GREY SHEETSIZES IN STOCK




TELEPHONE 01-419 4000 021-496 4111 061-316 850

TELEFAX 01-419 4017 021-431 7391 061-315 107



AVAILABLE EX-STOCK

James

Hea

ly Lim

ited

36

‘SWAN’ ‘WHALE’ ‘BEAR’

6MM 6MM10MM 10MM12MM 12MM

16MM20MM 20MM25MM 25MM30MM 30MM40MM 40MM 40MM

50MM 50MM65MM75MM 75MM90MM 90MM

100MM 100MM125MM

150MM 150MM200MM

‘TUFNOL’ ROUND RODDIAMETERS IN STOCK

1220 X 1220MM‘1P/13’ ‘KITE’ ‘WHALE’ ‘CARP’1.00MM 1.60MM 1.50MM 1.50MM1.60MM 3MM 3MM 3MM

3MM 6MM 4MM 6MM4MM 8MM 5MM 12MM5MM 10MM 6MM6MM 12MM 8MM8MM 16MM 10MM

10MM 20MM 12MM12MM 25MM 16MM16MM 20MM

25MM30MM40MM50MM

‘TUFNOL’ SHEETSIZES IN STOCK

James

Hea

ly Lim

ited

BASE

PHENOLIC PAPER

PHENOLIC COTTON

GRADE DESCRIPTION

ELECTRICAL INSULATOR,MACHINES WELLLOW VOLTAGE,

GOOD ALL-ROUND QUALITYELECTRICAL INSULATOR,

MACHINES WELLGENERAL PURPOSE, GOOD

MECHANICAL AND ELECTRICALSTRENGTH

BEARING MATERIAL, USE WITHWATER OR OTHER LUBRICANTS

HIGH QUALITY, FIRST-CLASSMECHANICAL AND ELECTRICAL

PROPERTIES

37




TELEPHONE 01-419 4000 021-496 4111 061-316 850

TELEFAX 01-419 4017 021-431 7391 061-315 107



AVAILABLE EX-STOCK

‘TUFNOL’ SHEETGRADES IN STOCK

‘TURNOL’ IS THE REGISTERED TRADE MARK OFTUFNOL LTD., BIRMINGHAM, ENGLAND

‘TUFNOL’

“SWAN”

“1P/13”

“KITE”

“WHALE”

“BEAR”

“CARP”

James

Hea

ly Lim

ited

38

1/8” X 1/8” 12 X 12MM 8 X 7MM 36 X 20MM

4 X 4MM 1/2” X 1/2” 10 X 8MM 40 X 22MM

3/16” X 3/16” 14 X 14MM 12 X 8MM 50 X 28MM

5 X 5MM 5/8” X 5/8” 14 X 9MM

6 X 6MM 16 X 16MM 16 X 10MM

1/4” X 1/4” 18 X 18MM 18 X 11MM

5/16” X 5/16” 3/4” X 3/4” 20 X 12MM

8 X 8MM 20 X 20MM 22 X 14MM

3/8” X 3/8” 25 X 25MM 25 X 14MM

10 X 10MM 1.1/4” X 1.1/4” 28 X 16MM

7/16” X 7/16” 40 X 40MM 32 X 18MM


STEEEELL STOCKK LLIST

KEY STEELSIZES IN STOCK

SQUARE RECTANGULAR

3MM 9/32” 12MM 3/4” 35MM

1/8” 7MM 1/2” 20MM 38MM

4MM 5/16” 15MM 22MM 1.3/4”

3/16” 8MM 5/8” 7/8” 50MM

5MM 3/8” 16MM 25MM

7/32” 10MM 17MM 1”

6MM 11MM 18MM 30MM

1/4” 7/16” 19MM 1.1/4”

SILVER STEEL ROUND RODDIAMETERS IN STOCK

James

Hea

ly Lim

ited

39

ROUND HEXAGON OCTAGON

8MM DIA. 3/8” A/F 3/8” A/F

10MM DIA. 1/2” A/F 1/2” A/F

1/2” DIA. 5/8” A/F 5/8” A/F

5/8” DIA. 3/4” A/F 3/4” A/F

3/4” DIA. 1” A/F 25MM A/F

25MM DIA.

CHISEL STEELSIZES IN STOCK

2 X 2 X 75MM 3/16” X 1/8” X 4” 7/8” X 7/16” X 4”

3 X 3 X 75MM 1/4” X 3/16” X 4” 11/16” X 15/32” X 4”

1/8” X 1/8” X 4” 5/16” X 1/4” X 4” 20 X 12 X 150MM

4 X 4 X 75MM 3/8” X 1/4” X 4” 5/8” X 1/2” X 5”

3/16” X 3/16” X 4” 8 X 7 X 100MM 3/4” X 1/2” X 6”

5 X 5 X 75MM 7/16” X 5/16” X 5” 22 X 14 X 150MM

6 X 6 X 75MM 10 X 8 X 100MM 25 X 14 X 150MM

1/4” X 1/4” X 4” 12 X 8 X 100MM 3/4” X 5/8” X 6”

5/16” X 5/16” X 4” 1/2” X 11/32” X 5” 7/8” X 5/8” X 5”

3/8” X 3/8” X 4” 14 X 9 X 100MM 28 X 16 X 150MM

7/16” X 7/16” X 4” 7/16” X 3/8” X 5” 32 X 18 X 150MM

1/2” X 1/2” X 5” 1/2” X 3/8” X 5” 7/8” X 3/4” X 6”

5/8” X 5/8” X 5” 16 X 10 X 150MM 1” X 3/4” X 6”

3/4” X 3/4” X 6” 18 X 11 X 150MM 36 X 20 X 150MM

7/8” X 7/8” X 6” 1/2” X 7/16” X 5” 40 X 22 X 110MM

1” X 1” X 6” 5/8” X 7/16” X 5”

GIB HEAD TAPER KEYSSIZES IN STOCK

SQUARE RECTANGULAR

James

Hea

ly Lim

ited

40

30MM 115MM 50 X 80MM 80 X 150MM

35MM 160MM 50 X 100MM 90 X 180MM

45MM 180MM 60 X 120MM 100 X 200MM

55MM 230MM 60 X 130MM 120 X 250MM

60MM

CAST IRONSIZES IN STOCK

SOLID ROUND ROD CORED ROUND RODDIAMETER I/D X O/D

960 X 650 X 0.30MM 965 X 880 X 0.60MM875 X 813 X 0.43MM

TINPLATE SHEETSIZES IN STOCK

BRASS MILD STEEL STAINLESS STEEL

MIXED MIXED MIXED

0.001” 0.001”

0.002” 0.002” 0.002”

0.003” 0.003” 0.003”

0.004” 0.004” 0.004”

0.005” 0.005” 0.005”

0.006” 0.006” 0.006”

0.007” 0.007”

0.008” 0.008” 0.008”

0.010” 0.010” 0.010”

0.012” 0.012” 0.012”

0.015” 0.015” 0.015”

0.020” 0.020” 0.020”

0.025” 0.025” 0.025”

SHIMPACKS IN STOCK

James

Hea

ly Lim

ited

41

3MM X1/8” X X

3/16” X X5MM X X6MM X X1/4” X X

5/16” X X8MM X X3/8” X X

10MM X X7/16” X

12MM X X1/2” X X

15MM X5/8” X X3/4” X X

20MM X X7/8” X

25MM X X1” X X

1.1/8” X30MM X X1.1/4” X X1.3/8” X35MM X1.1/2” X X40MM X X1.3/4” X X50MM X X

2” X X2.1/4” X60MM X2.1/2” X2.5/8” X3.1/2” X

STAINLESS STEEL ROUND RODDIAMETERS IN STOCK

(CORK WAREHOUSE ONLY)DIAMETER 303 316

James

Hea

ly Lim

ited

42

2500 X 1250MM

0.70MM 0.90MM 1.20MM 1.50MM 2.00MM

STAINLESS STEEL SHEETSIZES IN STOCK

(CORK WAREHOUSE ONLY)

1.1/2” O/D X 16SWG 2” O/D X 16SWG

STAINLESS STEEL ROUND TUBESIZES IN STOCK

FULL RANGE OF STAINLESS STEEL FITTINGS FOR ARCHITECTURAL USE

STAINLESS STEEL FITTINGSIN STOCK







TELEPHONE 01-4194000 021-4964111 061-316850

TELEFAX 01-4194017 021-4317391 061-315107



AVAILABLE EX-STOCK

James

Hea

ly Lim

ited

43


ZINNC STOCKK LLIST

2000 X 1000 X 0.70MM

ZINC SHEETSIZE IN STOCK

NNIICCKKEELL SSIILLVVEERR SSTTOOCCKK LLIISSTT

EYE WIRE 2.50 X 2.00MM GRAPE + GADROON 9.00 X 4.15MM

GADROON 6.35 X 2.30MM RIBBON + REED 6.50 X 3.25MM

GADROON 7.40 X 2.85MM RIBBON + REED 7.90 X 3.02MM

GADROON 9.53 X 3.60MM STRAIGHT GADROON 5.30 X 2.80MM

GADROON BEAD 7.55 X 2.60MM STRAIGHT GADROON 7.00 X 2.50MM

GADROON EGG 7.90 X 2.25MM STRAIGHT GADROON 7.60 X 2.80MM

NICKEL SILVER DECORATIVE BEADINGDESIGNS + SIZES IN STOCK




TELEPHONE 01-419 4000 021-496 4111 061-316 850

TELEFAX 01-419 4017 021-431 7391 061-315 107



AVAILABLE EX-STOCK

James

Hea

ly Lim

ited

44

113 BB 480 BLF GB 130 480 W(BROWN) (BLUE) (CARBRAX) (STAINLESS STEEL)

POLISH BARSGRADES IN STOCK

SISAL POLISH GLOSS

DIAMETER X SECTION DIAMETER X SECTION DIAMETER X FOLD

150 X 1 150 X 1 150 X 50

150 X 2 150 X 2

150 X 3

200 X 1 200 X 1 200 X 75

200 X 2 200 X 2 200 X 100

200 X 3 200 X 3

250 X 1 250 X 1 250 X 100

250 X 2 250 X 2

250 X 3 250 X 3

POLISH MOPSSIZES AND TYPES IN STOCK

FFINNISHHINNG MMATEERIALLSTOCKK LLIST

SEERVICEES

WELDING BRAZING SOFT SOLDERING SILVER SOLDERING

FOLDING BEDING GUILLOTINING BAND-SAWING

POLISHING LACQUERING

SERVICESAVAILABLEJa

mes H

ealy

Limite

d

jhl catalogue version 3 - james healy ltd catalogue v3.pdf · james healy...

Documents