jj514 project 1 politeknik ibrahim sultan mechanical engineering department (manufacturing)
TRANSCRIPT
JJ514 PROJECT 1
POLITEKNIK IBRAHIM SULTAN
MECHANICAL ENGINEERING DEPARTMENT (MANUFACTURING)
4M : Maruku mini molding machine
supervisor:TUAN RAFIUDDIN BIN ROHANI
Innovate by:
MUHAMMAD HAZLAMI BIN HASSAN 09DTP12F1022
MUHAMMAD RIDZUWAN BIN MOHD SHUKRI 09DTP12F1028
MOHD SHUKUR BIN SAAD09DTP12F1024
SITI NURAISHAH BINTI MOHD ZAINEL 09DTP12F1003
GROUP MEMBER'S
4
INTRODUCTION• Maruku is one of the traditional snacks among indian’s
society in Malaysia. It is usually sell by white bean’s seller or vadai seller . Now, the demand for maruku is getting higher and we can see it is one of the famous snacks sell by the small-scale industries. Due to that, we have created a machine called Maruku Mini Molding Machine (4M machine) that enables the users to produce more maruku. This machine also helps to reduce the time taken to make maruku.
PROBLEM STATEMENT
• Maruku dough usually placed in a mold which is small in size thus it restrain us from putting many dough in the mold. Besides that, it takes a long time to rotate the mold. The use of existing maruku mold is very dangerous because the mold is rotating on the surface of the cooking oil. Therefore, with 4M machine, it can save time and energy, plus it can reduces the risk of injury.
LITERATURE REVIEWThe relevant subjects are studied to be used as a guide for this project. This l
iterature review is based on a research of several maruku machine that are use in IKS and homemade kitchen.
We focus on :• Overview of maruku machine Principle .• Comparison between this literature review with mini maruku molding
machine.
3.1 Overview of maruku molding machine
Zull Design Product ( Using Pneumatic )
•Needs sophisticated machine to perform this process.•Required high cost in creating this project
•Required high maintenance
•Consist of large components
3.2 Comparison between this literature review with mini maruku molding machine.
Figure 1 Figure 2
To produce a Maruku Mini Molding Machine (4M)
OBJECTIVE
SCOPEUse for household usage
Can produce various type of maruku pattern
It is simple manual machine
This machine also has a good safety features
3d Design
Figure 3
GANTT CHARTC:\Users\user\Desktop\PROJECT\GANTT CHART & FLOW CHART.xlsx
FLOW CHART
Expected costType Of Material Number Of
UnitPrice / Unit (RM) Total (RM)
Maruku Mold 3 15 45
Rack and Pinion 1 set 50 50
Crank 1 12 12
Sprocket and Chain 1 set 15 15
Dough Basin 1 20 20
Body Stand (Mild Steel) 1 50 50
Compress Plate 1 15 15
Total : 207
ConclusionAs a conclusion, 4M machine can save time
and energy for home use and can produce a lot of maruku at once.
References• Zull Design Autronik, C:\Users\user\Desktop\PROJECT\ZullDesign Profil-syarikat.htm
• Utusan Online , C:\Users\user\Desktop\PROJECT\Mesin maruku V2.htm
• ML TECH PRECISION ENGINEERING, Jalan Suria 64, Masai, 81700, Pasir Gudang. Johor
• SLS BEARINGS (M) SDN BHD