john deere golf products 180sl precisioncut walk greens ... · bm24127 (1) quick adjust 5 (qa5)...

3.5 hp (2.6 kW) at 3600 rpm,Engine Manufacturer Net Power,Tested in accordance with SAEJ1349. The engine horsepowerand torque information areprovided by the enginemanufacturer to be used forcomparison purposes only.Actual operating horsepowerand torque will be less.Refer to the enginemanufacturer's web site foradditional information.

Gas Engine

Dual Aluminum Drive RearTraction Drum2.7 Qts. (2.5L) Fuel Tank0.182 (4.62mm) Frequencyof Clip

18 In. (45.7 cm) 11 BladeReel5 In. Reel Diameter2.0 mm Ultra Low BedKnifeSpeed Link Hieght ofCut Adjustment SystemOperator Presence SystemEnclosed Roller DriveDifferentialGrass Catcher

Foam Wrapped AdjustableHandle BarMachined Grooved Solid FrontRoller With Solid End CapsMeets Carb Standards

CODEATTACHMENTIDENTIFIER DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

Select One Code From Each Required Category

BASE MACHINEF.O.B. Davenport, Iowa

5512M 180SL PrecisionCut Walk Greens Mower (Model Year 2014) 9,154.00

DESTINATION001A US/Canada In Base Price

001B Europe Same Price

001C Australia/New Zealand Same Price

001D All Other Countries Same Price

REEL FRONT ROLLERS1308 (1) 18 In. 2 In. (5 cm) Diameter Machined Grooved

Solid Roller with Solid End CapsIn Base Price

1309 (1) 18 In. 2 In. (5 cm) Diameter Machined SmoothSolid Roller

-12.00

1321 (1) 18 In. 2 In. (5 cm) Diameter Wide Tube/HollowSmooth Rollers

-46.00

1390 Less Front Rollers -209.00

ATTACHMENTS - ORDER AS DESIREDMiscellaneous:

9766 Light Kit 369.00

9779 Transport Wheels and Stand 473.00

9780 Rotary Brush/Greens Tender Conditioner Drive(Rotary Brush or Greens Tender Conditioner Not Included)

1,196.00

JOHN DEERE GOLF PRODUCTS

180SL PrecisionCut Walk Greens Mower (Model Year 2014)Equipment for Base Machine

03 December 2014 U.S.G-10- 1


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9781 Rotary Brush 235.00

9783 Push Brush 500.00

9782 Greens Tender Conditioner 468.00

9801 Front Rotary DT BrushBrush with helix design and increased bristles; Can not be used with GTC. Also need toorder Gear Drive.

240.00

ATTACHMENTS FOR FIELD CONVERSIONBedknives

MT7350 Bedknife, 2.0 mm Ultra Low-Cut See Parts

MT4846 Bedknife, 2.5 mm Tournament See Parts

Miscellaneous:TCA23624 14 Blade Reel See Parts

AMT2865 Frequency Speed Up KitIncreases Clip Frequency to .160

See Parts

BM24731 Front Rotary DT BrushBrush with helix design and increased bristles; Can not be used with GTC. Also need toorder Gear Drive.

251.46

BM20568 Greens Tender Conditioner 500.76

BM20579 Light Kit 394.83

BM23449 Push Brush 535.00

AMT2859 Reel Clutch KitDisengages Reel to Make it Easier to Pull Machine Backwardsin Tight Mowing Conditions.

See Parts

BM20569 Rotary Brush 251.46

BM20578 Transport Wheels and Stand 506.11

Rollers:BM24204 (1) 18 In. 2 In. (5 cm) Diameter Hollow Smooth Roller 174.41

BM20562 (1) 18 In. 2 In. (5 cm) Diameter Machined GroovedSolid Roller With Solid End Caps

223.63

BM20561 (1) 18 In. 2 In. (5 cm) Diameter Machined SmoothSolid Roller

210.79

BM24203 (1) 18 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth Roller 174.41


180SL PrecisionCut Walk Greens Mower (Model Year 2014)Continued

03 December 2014 U.S.G-10- 2

3.5 hp (2.6 kW) at 3600 rpm,Engine Manufacturer Net Power,Tested in accordance with SAEJ1349. The engine horsepowerand torque information areprovided by the enginemanufacturer to be used forcomparison purposes only.Actual operating horsepowerand torque will be less.Refer to the enginemanufacturer's web site foradditional information.Gas Engine

Dual Aluminum Drive Rear

Traction Drum2.7 Qts. (2.5L) Fuel TankQA5 18 In. (45.7 cm) 11Blade Reel5 In. Reel Diameter2.0 mm Standard BedKnifeOperator Presence SystemEnclosed Roller DriveDifferentialGrass CatcherFoam Wrapped Adjustable HandleBarMachined Grooved Solid FrontRoller with Solid End CapsHollow Smooth rear rollersElectric Drive Motor for Cutting

UnitOn Board BacklappingOn Board Electrical DiagnosticLightAdjustable Frequancy of Clip


SUGGESTEDLIST PRICE

USD ($)



5541M 180 E-Cut Hybrid Walk Greens Mower (Model Year 2014) 11,885.00





0136 France 176.00




-12.00

1321 (1) 18 In. 2 In. (5 cm) Diameter Wide Tube/HollowSmooth Rollers

-46.00


REEL REAR ROLLERS1622 (1) 18 In. 2 In. (5 cm) Diameter Wide Tube/Hollow

Smooth RollersIn Base Price

1690 Less Rear Rollers -163.00


180 E-Cut Hybrid Walk Greens Mower (Model Year 2014)Equipment for Base Machine

03 December 2014 U.S.G-10- 3


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNITS1200 (1) Quick Adjust 5 (QA5) Seven Blade 18 In. Heavy Section Standard Cutting

Units with 4.8 mm bedknife, Direct Mount Grass Catcher Yoke, less Front and RearRollers, Motors and Counter Weights

-247.00

1202 (1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with 2.0mm bedknife, DirectMount Grass Catcher Yoke, less Front and Rear Rollers, Motors and Counter Weight

In Base Price

1290 Less Cutting Unit -2,622.00

REEL CUTTING UNIT COUNTER WEIGHTS1400 (1) Cutting Unit ONLY Counter Weight Kit

Needed if NOT installing GTC Kit.In Base Price

1407 (1) QA5 FTC/GTC ONLY Counter Weight KitNeeded if installing GTC/Rotary Turf Brush on cutting unit.

Same Price

1490 Less Counter Weight Kit -60.00


9743 (1) GTC/FTC Gear DriveRotary Brush or Greens Tender Conditioner Not Included.

1,227.00

9766 Light Kit 369.00


9781 (1) QA5 18 In. Rotary Turf BrushCan not be used with GTC. Also need order Gear Drive code 9020

200.00



9812 (1) Grass Catcher with large paddle clip (22 Low Profile) 183.00

9813 (1) QA5 Grass Catcher Side Plate Insert 46.00

9803 (1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with YokesFront and Rear Rollers, Motors and Counter Weight not included.

2,389.00

9801 (1) QA5 18 In. Front Rotary DT BrushBrush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

200.00




Cutting Units:BM24128 (1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with Yokes, less Front and

Rear Rollers, Motors and Counter Weight2,556.23


180 E-Cut Hybrid Walk Greens Mower (Model Year 2014)Continued

03 December 2014 U.S.G-10- 4


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM24127 (1) Quick Adjust 5 (QA5) Seven Blade 18 In. Heavy Section Standard Cutting

Units with 4.8mm bedknife, Less Front and Rear Rollers, Motors and Counter Weights2,291.94

Miscellaneous:BM24374 (1) 18 In. Front Rotary Turf Brush

Requires GTC/FTC Gear Drive.214.00

BTC10214 (1) 18 In. Rear Grass Catcher with large paddle clip1 Needed for 180 E-Cut Hybrid Walk Greens Mowers.2 Needed for 8000 E-Cut Hybrid Fairway Mower.Not compatible with with rear bail system BTC10405.

195.81

BM22469 (1) GTC/FTC Gear DriveRequires FTC or GTC.

1,339.64

BM24732 (1) QA5 18 In. Front Rotary DT BrushBrush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

214.00

BM23910 (1) QA5 Grass Catcher Lip ExtensionThis kit extends the front lip of the grass catcher closer to the reel.

9.63

TCA23622 14 Blade Reel See Parts

BTC10629 Direct Mount Grass Catcher (18") 179.76

BM24900 Direct Mount QA5 Grass Catcher Brackets 69.56





Reel Cutting Unit Counter WeightsBM22762 (1) Cutting Unit ONLY Counter Weight Kit

Needed if NOT installing Rear Roller Power Brushor GTC / FTC Kits.

64.20

BM22704 (1) QA5 FTC/GTC ONLY Counter Weight KitNeeded if ONLY installing FTC/GTC on cutting unit.

64.20


BM20562 (1) 18 In. 2 In. (5 cm) Diameter Machined GroovedSolid Roller With Solid End Caps

223.63


210.79

BM24203 (1) 18 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth Roller 174.41



03 December 2014 U.S.G-10- 5


Dual Aluminum Drive RearTraction Drum2.7 Qts. (2.5L) Fuel Tank0.182 (4.62mm) Frequency

of Clip22 In. (55.9 cm) 11 BladeReel5 In. Reel Diameter2.5mm Tournament BedKnifeSpeed Link Hieght ofCut Adjustment SystemOperator Presence SystemEnclosed Roller DriveDifferentialGrass Catcher

Foam Wrapped AdjustableHandle BarMachined Grooved Solid FrontRoller With Solid End CapsMeets Carb Standards


SUGGESTEDLIST PRICE

USD ($)











-12.00

1302 (1) 22 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth Rollers -65.00



9766 Light Kit 369.00


9780 Rotary Brush/Greens Tender Conditioner Drive(Rotary Brush or Greens Tender Conditioner Not Included)

1,196.00



03 December 2014 U.S.G-10- 6


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9781 Rotary Brush 235.00



9801 Front Rotary DT BrushBrush with helix design and increased bristles; Can not be used with GTC. Also need toorder Gear Drive.

240.00


ET17532 Bedknife, 4.8mm Fairway See Parts

MT7351 Bedknife, 2.0mm Ultra Low Cut See Parts

ET17534 Bedknife, 2.5mm Tournament See Parts

ET17533 Bedknife, 3.2 mm See Parts

ET11066 Bedknife, 3.2 mm with Hardened Insert See Parts

Miscellaneous:TCA23623 14 Blade Reel See Parts

AMT2865 Frequency Speed Up KitIncreases Clip Frequency to .160

See Parts

BM24729 Front Rotary DT BrushBrush with helix design and increased bristles; Can not be used with GTC. Also need toorder Gear Drive.

251.46


TCU23674 John Deere Golf Operator Videos and All Products Safety Video DVD Set See Parts




See Parts


BM23443 Rotary Brush/Greens Tender Conditioner Drive(Rotary Brush or Greens Tender Conditioner Not Included).

1,279.71

TCU29767 Soft Bristle Brush for Push Brush Kit (Brush only)Softer bristles than standard brush supplied with kit.

See Parts




03 December 2014 U.S.G-10- 7


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Rollers:

BM24202 (1) 22 In. 2 In. (5 cm) Diameter Hollow Smooth Roller 174.41

BM18712 (1) 22 In. 2 In. (5 cm) Diameter Machined GroovedSolid Front Roller With Solid End Caps

243.96

BM18711 (1) 22 In. 2 In. (5 cm) Diameter Machined SmoothSolid Front Roller

231.11

BM18480 (1) 22 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth RollerFor use on Greens.

174.41



03 December 2014 U.S.G-10- 8


Dual Aluminum Drive Rear

Traction Drum2.7 Qts. (2.5L) Fuel TankQA5 22 In. (55.9 cm) 11Blade Reel5 In. Reel Diameter3.2 mm Standard BedKnifeOperator Presence SystemEnclosed Roller DriveDifferentialGrass CatcherFoam Wrapped Adjustable HandleBarMachined Grooved Solid FrontRoller with Solid End CapsHollow Smooth rear rollersElectric Drive Motor for Cutting

UnitOn Board BacklappingOn Board Electrical DiagnosticLightAdjustable Frequancy of Clip


SUGGESTEDLIST PRICE

USD ($)



5504M 220 E-Cut Hybrid Walk Greens Mower (Model Year 2014) 11,833.00

DESTINATION0195 Mexico Same Price

001A US/Canada In Base Price




0136 France 176.00




-12.00


REEL REAR ROLLERS1602 (1) 22 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth Rollers In Base Price


REEL CUTTING UNITS


220 E-Cut Hybrid Walk Greens Mower (Model Year 2014)Equipment for Base Machine

03 December 2014 U.S.G-10- 9


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNITS Continued...1201 (1) Quick Adjust 5 (QA5) Seven Blade 22 In. (55.9 cm)

Cutting Units with Adjustable 4.8mm Bedknife, 5 In. (12.7 cm)Diameter Reels and Direct Mount Grass Catcher Yoke, Less Front and Rear Rollers,Motor and counter weight.

-84.00

1203 (1) Quick Adjust 5 (QA5) Eleven Blade 22 In. (55.9 cm)Cutting Units with Adjustable 2.0mm Bedknife, 5 In. (12.7 cm)Diameter Reels and Direct Mount Grass Catcher Yoke, Less Front and Rear Rollers,Motor and counter weight.

In Base Price

1290 Less Cutting Unit -2,513.00


Needed if NOT installing GTC Kit.In Base Price

1407 (1) QA5 FTC/GTC ONLY Counter Weight KitNeeded if installing GTC/Rotary Turf Brush on cutting unit.

Same Price

1490 Less Counter Weight Kit -60.00


9743 (1) GTC/FTC Gear DriveRotary Brush or Greens Tender Conditioner Not Included.

1,227.00

9766 Light Kit 369.00


9781 (1) QA5 22 In. Rotary Turf BrushCan not be used with GTC. Also need order Gear Drive code 9020

200.00



9812 (1) Grass Catcher with large paddle clip (22 Low Profile) 168.00

9813 (1) QA5 Grass Catcher Side Plate Insert 46.00

9803 (1) Quick Adjust 5 (QA5) Eleven Blade 22 In. (55.9 cm)Cutting Units with Adjustable 2.0mm BedknifeFront and Rear Rollers, Motors and Counter Weight not included.

2,280.00

9801 (1) QA5 22 In. Front Rotary DT BrushBrush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

200.00






03 December 2014 U.S.G-10- 10


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...ET17534 Bedknife, 2.5mm Tournament See Parts



Cutting Units:BM24130 (1) QA5 Eleven Blade 22 In. Cutting Unit

w/Adjustable 2.0 mm Bedknife, Less Front and Rear Roller & Motor2,439.60

BM25128 (1) QA5 Eleven Blade 22 In. Cutting Unitw/Adjustable 2.0 mm Bedknife, Less Front and Rear Roller & Motor

2,439.60

BM24129 (1) QA5 Seven Blade 22 In. Heavy Section BladeCutting Unit With Adjustable 4.8 mm Bedknife, Less Yokes,Front and Rear Roller & Motor

2,349.71

Miscellaneous:BM22761 (1) 22 In. Front Rotary Turf Brush

Can not be used with FTC/GTC.Requires GTC/FTC Gear Drive.

214.00

BM22471 (1) 22 In. Greens Tender Conditioner (GTC) Shaft and BladesRequires GTC/FTC Gear Drive.

295.31

BM22469 (1) GTC/FTC Gear DriveRequires FTC or GTC.

1,339.64


214.00


9.63

TCA23621 14 Blade Reel See Parts

BM24900 Direct Mount QA5 Grass Catcher Brackets 69.56

BTC10216 Grass Catcher with large paddle clip (22 Low Profile)2 needed for complete machine for 2500#s.2 needed for rear locations for Fairway Mowers 7700/8700.1 needed for 180 & 220 E-Cut Hybrid Walk Greens Mower.

179.76



BM24199 QA5 Grass Catcher Side Plate Insert2 Needed for complete machine 2500's.1 Needed for front center location for 7500/8500 Fairway Mowers.1 Needed for 180 & 220 E-Cut Hybrid Walk Greens Mowers.3 Needed for front 8000 E-Cut Hybrid Fairway Mower.

49.21


See Parts




03 December 2014 U.S.G-10- 11


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Reel Cutting Unit Counter Weights

BM22762 (1) Cutting Unit ONLY Counter Weight KitNeeded if NOT installing Rear Roller Power Brushor GTC / FTC Kits.

64.20


64.20



243.96


231.11


174.41



03 December 2014 U.S.G-10- 12


Dual Aluminum Drive RearTraction Drum2.7 Qts. (2.5L) Fuel Tank0.286 (7.26mm) Frequencyof Clip (7-Blade)26 In. (66.0 cm) 7 BladeReel5 In. Reel Diameter3.2 mm Standard BedKnifeSpeed Link Hieght ofCut Adjustment SystemOperator Presence SystemEnclosed Roller DriveDifferentialGrass Catcher

Foam Wrapped AdjustableHandle BarMachined Grooved Solid FrontRoller with Solid End CapsMeets Carb Standards


SUGGESTEDLIST PRICE

USD ($)











-9.00


REEL CUTTING UNITS1211 (1) 26 In. 7-Blade Cutting Unit In Base Price

1210 (1) 26 In. 11-Blade Cutting Unit Same Price


9766 Light Kit 369.00




03 December 2014 U.S.G-10- 13


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9780 Rotary Brush/Greens Tender Conditioner Drive

(Rotary Brush or Greens Tender Conditioner Not Included)1,196.00

9781 Rotary Brush 235.00



MT6947 Bedknife, 3.2 mm See Parts

MT6946 Bedknife, Long-Life Fairway See Parts

Miscellaneous:AMT2865 Frequency Speed Up Kit

Increases Clip Frequency to .160See Parts






See Parts



See Parts


Rollers:BM20564 (1) 26 In. 2 In. (5 cm) Diameter Machined Grooved

Solid Front Roller with Solid End Caps265.36


255.73

BM17670 (1) 26 In. 3 In. (7.6 cm) Diameter Heavy DutyGrooved Disc Front Roller

406.60

BM17671 (1) 26 In. 3 In. (7.6 cm) Diameter Heavy DutySmooth Solid Front Roller

352.03

BM19818 (1) 26 In. 3 In. (7.6 cm) Diameter Spiral GroovedFront Roller With Spiral End Caps

469.73



03 December 2014 U.S.G-10- 14

Carries 2 Walk Greens MowersCompatible with A, B, C and SLModels 180 and 220 E-Cut HybridWalk Greens Mower

Multiple angle location rampwith stainless steel latchsystem

Spray-On Bedliner on floorof trailer bed and rampWelded storage holders forretaining bar when not inuse

Box Capacity: 12.7 Cu. Ft.(0.36 cu. m)

Maximum Load: 1000 Lbs.(454 kg)Maximum Payload: 700 Lbs.(318 kg)Pneumantic Turf Tires 2 Ply22.5x10.00-8

Ball Bearing, Double SealedWheel Bearings

1-7/8 In. Dia. (4.8 cm)Hitch Coupler

Inside Box 60"L X 40"WOutside Box 62"L x46"WBox Side Panels 8.5" TallFront Wall 13" Tall

Outside to Outside Tire is 66"Ramp Down Position 27" L X 46"W downTrailer Tongue 43" L


SUGGESTEDLIST PRICE

USD ($)



0521TC 22B Walk Greens Mower TrailerMust be Ordered in Quantities of Two.Requires Utility Vehicles to be EquipmentWith 1-7/8 In. (4.8cm) Ball Hitch.

2,407.00

Miscellaneous ItemsEuropean CE Kit:

9100 European CE Conversion Kit for 22B Greensmower TrailerMust Be Ordered to Receive a 22B Walk-Behind GreensmowerTrailer Which Meets CE Mark Requirements. Kit IncludesPictorial Decals and Operator's Manual in English, French,German, Spanish and Italian.

No Charge

ATTACHMENTS FOR FIELD CONVERSIONMiscellaneous:



See Parts

JOHN DEERE GOLF PRODUCTSGREENSMOWER TRAILER

22B Walk Greens Mower TrailerEquipment for Base Machine

03 December 2014 U.S.G-10- 15

21.0 hp (15.7 kW) at 3600 rpm,Engine Manufacturer Gross Power,Tested in accordance with SAEJ1995. The engine horsepowerand torque information areprovided by the enginemanufacturer to be used forcomparison purposes only.Actual operating horsepowerand torque will be less. Referto the engine manufacturer'sweb site for additionalinformation.

Foot Actuated Adjustable TiltSteering WheelDeluxe Seat2-Post SAE J21294 Roll OverProtection Structure with Seat

BeltsCommand Arm Operator ControlsFour Function LED WarningMonitor with Hour MeterOne Touch Hand Lift Lever

Hand Operated Mow/TransportLeverDirect Mounted PumpsPower SteeringHydrostatic DriveSingle Reel PumpHydraulic Reel MotorsOffset Reel DesignQuik-Tatch Cutting Units withAdjustable ShieldsQuick Adjust QA5 Cutting Unitswith Speed Link Height of CutSystem

Dual Point Adjustable Bed Knifewith Notch AdjustmentsDouble Upstops for Front CuttingUnitsMachined Grooved Solid FrontRollers with Solid End Caps and

22 In. 2 In. (5 cm) DiameterWide Tube/Hollow Smooth RearRollersSit on Seat DiagnosticsWhite Box Controller

Micro-Lap Backlapping Valve andReel Speed ControlDisk BrakesHydraulic Oil Cooler18X10.50-10 2 Ply SmoothFloatation TiresSingle Fuel Tank, 7.9 Gallon(30L) Fuel CapacityBCI Group 40 Maintenance FreeBatteryJohn Deere Golf Operator Videosand All Products Safety Video

DVD Set


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEF.O.B. Raleigh, North Carolina

1206TC 2500B PrecisionCut Riding Greens Mower - Gas 34,519.00

DESTINATION CODE001A US/Canada In Base Price

001C Aust/NZ Same Price

001D Other Countries Same Price

OPERATOR MANUALS - LANGUAGES0443 All Other countries (English/Spanish) No Charge

REEL CUTTING UNITS1212 (3) Vertical Cutting Units With Front AND Rear Rollers

Requires 2010 Code, Less Front Rollers.-72.00

1201 (3) Quick Adjust 5 (QA5) Seven Blade 22 In. (55.9 cm) Heavy Section Cutting UnitsWith Adjustable 4.8mm Bedknife, 5 In. (12.7 cm) Diameter Reels. Less Front and RearRollers

-252.00

1203 (3) Quick Adjust 5 (QA5) Eleven Blade 22 In. (55.9 cm) Cutting Units With Adjustable2.0mm Bedknife, 5 In. (12.7 cm) Diameter Reels. Less Front and Rear Rollers

In Base Price

1290 Less Cutting Units -6,840.00

JOHN DEERE GOLF PRODUCTSREEL MOWERS

2500B PrecisionCut Riding Greens Mower - GasEquipment for Base Machine

03 December 2014 U.S.G-10- 16


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS1302 (3) 22 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth Front Rollers -195.00

1300 (3) 22 In. 2 In. (5 cm) Diameter Machined Grooved Solid Front Rollers With Solid EndCaps

In Base Price

1307 (3) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers with Spiral End CapsNot compatible if FTC / GTC installed. 3 In. Diameter Front Rollers Raise the MinimumHeight of Cut.

510.00

1304 (3) 22 In. 2 In. (5 cm) Diameter Machined Grooved Wide Solid Front Rollers Same Price

1318 (3) 22 In. 2 In. (5cm) MT Spiral RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

348.00

1320 (3) 22 In. 2 In. (5cm) MT Grooved RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

348.00




543.00


543.00


WHEELS WITH TIRES (THREE)1021 (3) Smooth Floatation Tires and Wheels (18x10.50-10) In Base Price

1022 (3) Smooth Tires and Wheels (20x10.00-10) 11.00

1023 (3) Turf Guard Traction Tires and Wheels (20x10.00-10) 42.00

1024 (3) Smooth Tires and Wheels (20x10.00-10) 4 Ply RatedLowest Recommended Tire pressure 15 PSI (1.03 bar). Due to higher pressures may causemarking on soft greens.

11.00

1149 Less Wheels with Tires -447.00


Needed if NOT installing Rear Roller Power Brush or GTC/FTC Kits.In Base Price

1403 (3) QA5 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on cutting unit.

228.00

1408 (3) QA5 Cutting Unit FTC/GTC ONLY Counter Weight KitNeeded if ONLY installing FTC/GTC on cutting unit.

Same Price


2500B PrecisionCut Riding Greens Mower - GasContinued

03 December 2014 U.S.G-10- 17


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...

1490 Less Counter Weight kitOrdered if Both Rear Roller Power Brush and FTC/GTC Kit Installed.

-180.00

REEL CUTTING UNIT ATTACHING YOKES3200 (3) 22 Inch Cutting Unit Attaching Yokes and Molded One-Piece Grass Catchers with

large paddle clip and Grass Catcher Side Plate Insert, Rear catcher and bail systemNeeded to attach 2009 cutting units to 2009 traction machine.

In Base Price

3201 (3) 22 Inch Cutting Unit Rear Attaching Point Yoke for FAIRWAYS and MoldedOne-Piece Grass Catchers with large paddle clip and Grass Catcher Side Plate Insert,Rear catcher and bail systemThese yokes attach at the rear of the cutting unit and are for units used in fairwayapplications (not recommended for greens).

778.00

3202 (3) 22 Inch Cutting Unit Attaching Yokes and direct mounted (Bullhorn) MoldedOne-Piece Grass Catchers, Rear grass catcher and bail systemThese yokes are required with the direct mounted (bullhorn) style grass catchers.

-113.00

3210 Less Cutting Yokes and Grass Catchers -1,417.00

ATTACHMENTS - ORDER AS DESIREDCutting Units:

9121 (3) QA5 22 In. Vertical Cutting Unit With FrontRoller Less Motor

6,768.00

Miscellaneous:9738 (3) 22 In. Fairway Tender Conditioners (FTC) Shaft and Blades

Requires order code 9743.1,431.00

9743 (3) GTC/FTC Gear DriveRequires Order Code (9738 or 9742).

3,681.00

9791 (3) 22 In. Rear Roller Power BrushesRequires order code 9750.

414.00

9750 (3) Rear Roller Power Brush DriveRequires order code 9791.

1,131.00

9751 (3) 22 In. Front Rotary Turf BrushCan not be used with FTC/GTC 9738 or 9742. Also need order code 9743.

600.00

9742 (3) 22 In. Greens Tender Conditioner (GTC) Shaft and BladesRequires order code 9743.

828.00

9756 (3) Smooth Roller Scrapers 45.00

9763 (3) QA5 Grass Catcher Lip ExtensionThis kit extends the front lip of the Grass Catcher closer to the reel.

27.00

9770 Leak Detector KitFor Serial No. TC250BG010001-.

1,361.00

9801 (3) 22 In. Front Rotary DT BrushBrush with helix design and increased bristles; Cannot be used with GTC/FTC. Also needto order Gear Drive.

600.00



03 December 2014 U.S.G-10- 18


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9803 (3) 11 blade QA5 Ccutting Units less front and rear rollers 6,840.00

9804 (3) 7 blade QA5 Cutting units less front and rear rollers 6,588.00

9805 Cutting Unit Top Shield Extension (Set of 3) 83.00







ET17767 Bedknife, Hi-cut Fairway 7.6 mm See Parts

Cutting Units:BM22460 (1) QA5 22 In. Vertical Cutting Unit With Front

Roller Less Motor2,413.91


2,439.60


2,349.71

Miscellaneous:BM22671 (1) 22 In. Fairway Tender Conditioners (FTC) Shaft and Blades

Requires GTC/FTC Gear Drive (BM22469).510.39

BM22761 (1) 22 In. Front Rotary Turf Brush 214.00


295.31

BM22668 (1) 22 In. Rear Roller Power BrushRequires Rear Roller Power Brush Drive (BM22527).

147.66

BM22995 (1) 22 In. Smooth Roller Scraper 16.06

BM22469 (1) GTC/FTC Gear Drive 1,339.64


214.00


9.63



03 December 2014 U.S.G-10- 19


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22527 (1) Rear Roller Power Brush Drive

Requires 22 In. Rear Roller Power Brush (BM22668).403.39

BTC10122 (3) 22 Inch Cutting Unit Rear Attaching Point Yoke Kit for FAIRWAYSThese yokes attach at the rear of the cutting unit and are for units used in fairwayapplications one (1) kit needed per machine.

1,431.66

TCA19547 2"x 22" Machine Grooved Roller Scraper See Parts

BM23002 3"X22" GROOVE ROLLER SCRAPERNot compatible with Fairway Tender Conditioners (FTC).Can be used on QA5 Cutting units by ordering (1) TCA19597for each scraper from parts. Requires 3 for 2500'sand 5 for Fairway mowers.

153.01

AMT2477 Arm Rest Kit (Includes One Arm Rest and Hardware) See Parts

BM23080 Cutting Unit Top Shield Extension (Set of 3) 88.81

TCB11356 Cutting Unit Yokes Kit (22") for MY1998-2008 854.93

TCB11341 Cutting Unit Yokes Kit for MY 2009 # Current or QA5 Cutting Units 599.20

BTC10686 Dew Whip with end supoport bracketFits 2014 Gas and All Model Year Diesel.

138.03

TCB11721 Grass Catcher Mounting KitSet of 3 Mounting Hardware for weight transfer system grass catcher.

143.39

BTC10216 Grass Catcher with large paddle clip (22 Low Profile)2 needed for complete machine for 2500#s Weight Transfer System.

179.76

AMT2978 Height of Cut Gauge Bar See Parts

TCB11165 Leak Detector Kit 1,456.27

BM19746 Light Kit, Front 255.73

BM19852 Light Kit, Rear Grass CatcherMounting Hardware and Wiring with One Light.

55.64

BM24199 QA5 Grass Catcher Side Plate Insert2 Needed for complete machine 2500's Weight Transfer System.1 Needed for front center location for 7500A Fairway Mowers.3 Needed for front 8000 E-Cut Hybrid Fairway Mower.

49.21

BTC10407 Rear Grass Catcher Bail KitMounting Bail needed for rear cutting unit 1 needed per machine.

160.50

BTC10408 Rear Grass Catcher with Handles1 needed for 2500's, 2 needed for complete machine 7500A.

148.73

TCB11167 Third Wheel Assist Kit 2,566.93

BM19750 Tires and Wheels (18x10.50-10), (3) Smooth Floatation 478.29

BM19748 Tires and Wheels (20x10.00-10), (3) Smooth 490.06



03 December 2014 U.S.G-10- 20


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10071 Tires and Wheels (20x10.00-10), (3) Smooth 4 Ply-Rated

Lowest Recommended Tire pressure 15 PSI (1.03 bar). Due to higher pressures may causemarking on soft greens.

490.06

BM19749 Tires and Wheels (20x10.00-10), (3) Turf Guard Traction 523.23

BTC10606 Weight Transfer Grass Catcher Mounting KitMounting Hardware for complete machine.

149.80



64.20

BM22705 (1) QA5 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brushon cutting unit.

145.51


64.20


Solid Front Roller With Solid End Caps243.96

BM18481 (1) 22 In. 2 In. (5 cm) Diameter Machined GroovedWide Solid Front Roller

243.96

BE23416 (1) 22 In. 2 In. (5 cm) Diameter Machined GroovedSolid Front RollerThis Roller is 20mm Shorter Than BM18481.

243.96


174.41

BTC10267 (1) 22 In. 2 In. (5cm) MT Grooved Roller 368.09

BM17668 (1) 22 In. 3 In. (7.6 cm) Diameter Heavy DutyGrooved Disc Front RollerNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

350.96

BM19817 (1) 22 In. 3 In. (7.6 cm) Diameter Spiral GroovedFront Roller With Spiral End CapsNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

425.86

BM23566 (1) 2X22" MT SPIRAL RollerRoller used to help reduce roller overlaps in fairways. For best results install in front andrear roller location of cutting unit.

368.09



03 December 2014 U.S.G-10- 21

19.6 hp (14.6 kW) per SAE J1995Engine hp is provided by theengine manufacturer to be usedfor comparison purposes only.Actual operating hp will beless. Refer to the enginemanufacturer's web site foradditional information.

Meets EPA Tier 4Foot Actuated Adjustable TiltSteering WheelDeluxe Seat2-Post SAE J21294 Roll OverProtection Structure with Seat

BeltsCommand Arm Operator ControlsFour Function LED WarningMonitor with Hour MeterOne Touch Hand Lift LeverHand Operated Mow/TransportLever

Direct Mounted PumpsPower SteeringHydrostatic DriveSingle Reel PumpHydraulic Reel MotorsOffset Reel DesignQuik-Tatch Cutting Units withAdjustable ShieldsQuick Adjust QA5 Cutting Unitswith Speed Link Height of Cut

SystemDual Point Adjustable Bed Knifewith Notch AdjustmentsDouble Upstops for Front CuttingUnitsMachined Grooved Solid FrontRollers with Solid End Caps

22 In. 2 In. (5 cm) DiameterWide Tube/Hollow Smooth RearRollersSit on Seat DiagnosticsWhite Box Controller


DVD Set


SUGGESTEDLIST PRICE

USD ($)



1186TC 2500B PrecisionCut Riding Greens Mower - Diesel 40,725.00


001B Europe 70.00



0195 Mexico Same Price


REEL CUTTING UNITS1212 (3) Vertical Cutting Units With Front AND Rear Rollers -72.00


-252.00


In Base Price


2500B PrecisionCut Riding Greens Mower - DieselEquipment for Base Machine

03 December 2014 U.S.G-10- 22


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNITS Continued...1290 Less Cutting Units -6,840.00



In Base Price


510.00



348.00


348.00




543.00


543.00






11.00




1403 (3) QA5 Cutting Unit Brush Only Counter Weight Kit 228.00


2500B PrecisionCut Riding Greens Mower - DieselContinued

03 December 2014 U.S.G-10- 23


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...Needed if only installing Rear Roller Power Brush on cutting unit.


Same Price


-180.00

SEATS2010 Deluxe Suspension Seat with Armrest 781.00

2009 Standard Seat 431.00

2090 Less Seat In Base Price

REEL CUTTING UNIT ATTACHING YOKES AND GRASSCATCHERS

3200 (3) 22 Inch Cutting Unit Attaching Yokes and Molded One-Piece Grass Catchers withlarge paddle clip and Grass Catcher Side Plate Insert, Rear catcher and bail systemNeeded to attach 2009 cutting units to 2009 traction machine.

In Base Price


778.00


-113.00




6,768.00



9743 (3) GTC/FTC Gear DriveRequires order code 9738.

3,681.00


414.00


1,131.00


600.00



03 December 2014 U.S.G-10- 24


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9742 (3) 22 In. Greens Tender Conditioner (GTC) Shaft and Blades

Requires order code 9743.828.00



27.00

9769 Greens Mower Convenience KitContains Storage Area Pad and Elastic Storage Retainer.

78.00


1,361.00


600.00

9803 (3) 11 blade QA5 Ccutting Units less front and rear rollers 6,840.00













2,439.60


2,349.71

Engine:TCA19916 B20 Biodiesel Conversion Kit

This kit converts one machine to use B20 Diesel fuel.See Parts





03 December 2014 U.S.G-10- 25


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22761 (1) 22 In. Front Rotary Turf Brush 214.00


295.31


147.66




214.00


9.63

BM22527 (1) Rear Roller Power Brush DriveRequires 22 In. Rear Roller Power Brush (BM22668).

403.39


1,431.66



153.01





BM19744 Dew Whip Holder BracketFits Diesel RGM ONLY.

65.27


138.03

BTC10655 Direct Mount Cutting Unit Yoke Kit for MY 2009 # Current or QA5 Cutting Units1 Required for front cutting units to install Direct Mount Grass Catchers.

587.43

BTC10630 Direct Mount Front Grass Catcher2 needed for complete machine for 2500#s.1 needed for 220 E-Cut Hybrid Walk Greens Mower.

179.76

BM24900 Direct Mount QA5 Grass Catcher Brackets2 Needed for complete machine 2500's.

69.56



03 December 2014 U.S.G-10- 26


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCB11721 Grass Catcher Mounting Kit

Set of 3 Mounting Hardware for weight transfer system grass catcher.143.39


179.76

BM19739 Greens Mower Convenience KitFor Diesel Models ONLY; Contains Storage Area Pad and Elastic Storage Retainer.

83.46





55.64


49.21


160.50


148.73




BTC10071 Tires and Wheels (20x10.00-10), (3) Smooth 4 Ply-RatedLowest Recommended Tire pressure 15 PSI (1.03 bar). Due to higher pressures may causemarking on soft greens.

490.06



149.80



64.20


145.51


64.20



03 December 2014 U.S.G-10- 27


SUGGESTEDLIST PRICE

USD ($)



243.96


243.96


243.96


174.41



350.96


425.86


368.09



03 December 2014 U.S.G-10- 28

21.0 hp (15.7 kW) at 3600 rpm,Engine Manufacturer Gross Power,Tested in accordance with SAEJ1995. The engine horsepowerand torque information areprovided by the enginemanufacturer to be usedfor comparison purposes only.Actual operating horsepower andtorque will be less. Refer tothe engine manufacturers website for additional information.

Foot Actuated Adjustable TiltSteering WheelDeluxe Seat2-Post SAE J21294 Roll OverProtection Structure with Seat

BeltsCommand Arm Operator ControlsFour Function LED WarningMonitor with Hour MeterOne Touch Hand Lift Lever

Hand Operated Mow/TransportLeverDirect Mounted PumpsPower SteeringHydrostatic DriveSingle Reel PumpElectric Reel MotorsOffset Reel DesignQuik-Tatch Cutting Units withAdjustable ShieldsQuick Adjust QA5 Cutting Unitswith Speed Link Height of CutSystem

Dual Point Adjustable Bed Knifewith Notch AdjustmentsDouble Upstops for Front CuttingUnitsMachined Grooved Solid FrontRollers with Solid End Caps

22 In. 2 In. (5 cm) DiameterWide Tube/Hollow SmoothRear RollersSit on Seat Diagnostics

White Box ControllerMicro-Lap Backlapping Valve andReel Speed ControlDisk BrakesHydraulic Oil Cooler18X10.50-10 2 Ply SmoothFloatation TiresSingle Fuel Tank, 7.9 Gallon(30L) Fuel CapacityBCI Group 40 Maintenance FreeBatteryJohn Deere Golf Operator Videosand All Products Safety Video

DVD Set


SUGGESTEDLIST PRICE

USD ($)



1216TC 2500E E-Cut Hybrid Riding Greens Mower - Gas 36,411.00







-252.00


In Base Price


REEL FRONT ROLLERS


2500E E-Cut Hybrid Riding Greens Mower - GasEquipment for Base Machine

03 December 2014 U.S.G-10- 29


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...1302 (3) 22 In. 2 In. (5 cm) Diameter Wide Tube/Hollow Smooth Front Rollers -195.00


In Base Price


510.00



348.00


348.00




543.00


543.00






11.00




1403 (3) QA5 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on cutting unit.

228.00

1408 (3) QA5 Cutting Unit FTC/GTC ONLY Counter Weight Kit Same Price


2500E E-Cut Hybrid Riding Greens Mower - GasContinued

03 December 2014 U.S.G-10- 30


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...1490 Less Counter Weight kit

Ordered if Both Rear Roller Power Brush and FTC/GTC Kit Installed.-180.00

REEL CUTTING UNIT ATTACHING YOKES3200 (3) 22 Inch Cutting Unit Attaching Yokes and Molded One-Piece Grass Catchers with

large paddle clip and Grass Catcher Side Plate Insert, Rear catcher and bail systemNeeded to attach 2009 cutting units to 2009 traction machine.

In Base Price


778.00


-113.00




6,768.00




3,681.00


414.00


1,131.00


600.00

9742 (3) 22 In. Greens Tender Conditioner (GTC) Shaft and BladesRequires order code 9743.

828.00



27.00


1,361.00


600.00



03 December 2014 U.S.G-10- 31


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9803 (3) 11 blade QA5 Ccutting Units less front and rear rollers 6,840.00













2,439.60


2,349.71





295.31


147.66




214.00


9.63



03 December 2014 U.S.G-10- 32


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22527 (1) Rear Roller Power Brush Drive

Requires 22 In. Rear Roller Power Brush (BM22668).403.39


1,431.66



153.01






138.03

TCB11721 Grass Catcher Mounting KitSet of 3 Mounting Hardware for weight transfer system grass catcher.

143.39


179.76





55.64


49.21


160.50


148.73






03 December 2014 U.S.G-10- 33


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10071 Tires and Wheels (20x10.00-10), (3) Smooth 4 Ply-Rated

Lowest Recommended Tire pressure 15 PSI (1.03 bar). Due to higher pressures may causemarking on soft greens.

490.06



149.80



64.20


145.51


64.20


Solid Front Roller With Solid End Caps243.96


243.96


243.96


174.41



350.96


425.86


368.09



03 December 2014 U.S.G-10- 34

19.6 hp (14.6 kW) per SAE J1995Engine hp is provided by theengine manufacturer to be usedfor comparison purposes only.Actual operating hp will beless. Refer to the enginemanufacturer's web site foradditional information.Meets EPA Tier4Foot Actuated Adjustable TiltSteering WheelDeluxe Seat2-Post SAE J21294 Roll OverProtection Structure with Seat

BeltsCommand Arm Operator ControlsFour Function LED WarningMonitor with Hour MeterOne Touch Hand Lift LeverHand Operated Mow/TransportLeverDirect Mounted Pumps

Power SteeringHydrostatic DriveSingle Reel PumpElectric Reel MotorsOffset Reel DesignQuik-Tatch Cutting Units withAdjustable ShieldsQuick Adjust QA5 Cutting Unitswith Speed Link Height of CutSystem

Dual Point Adjustable Bed Knifewith Notch AdjustmentsDouble Upstops forFront CuttingUnitsMachined Grooved Solid FrontRollers with Solid End Caps

22 In. 2 In. (5 cm) DiameterWide Tube/Hollow SmoothRear RollersSit on Seat DiagnosticsWhite Box Controller


DVD Set


SUGGESTEDLIST PRICE

USD ($)



1196TC 2500E E-Cut Hybrid Riding Greens Mower - Diesel 42,610.00


001B Europe 70.00







-252.00


In Base Price


2500E E-Cut Hybrid Riding Greens Mower - DieselEquipment for Base Machine

03 December 2014 U.S.G-10- 35


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNITS Continued...1290 Less Cutting Units -6,840.00



In Base Price


510.00



348.00


348.00




543.00


543.00






11.00




1403 (3) QA5 Cutting Unit Brush Only Counter Weight Kit 228.00


2500E E-Cut Hybrid Riding Greens Mower - DieselContinued

03 December 2014 U.S.G-10- 36


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...Needed if only installing Rear Roller Power Brush on cutting unit.

1408 (3) QA5 Cutting Unit FTC/GTC ONLY Counter Weight Kit Same Price


-180.00




REEL CUTTING UNIT ATTACHING YOKES AND GRASSCATCHERS

3200 (3) 22 Inch Cutting Unit Attaching Yokes and Molded One-Piece Grass Catchers withlarge paddle clip and Grass Catcher Side Plate Insert, Rear catcher and bail systemNeeded to attach 2009 cutting units to 2009 traction machine.

In Base Price


778.00


-113.00




6,768.00




3,681.00


414.00


1,131.00


600.00



03 December 2014 U.S.G-10- 37


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9742 (3) 22 In. Greens Tender Conditioner (GTC) Shaft and Blades

Requires order code 9743.828.00



27.00

9769 Greens Mower Convenience KitContains Storage Area Pad and Elastic Storage Retainer.

78.00


1,361.00


600.00

9803 (3) 11 blade QA5 Ccutting Units less front and rear rollers 6,840.00













2,439.60


2,349.71







03 December 2014 U.S.G-10- 38


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22761 (1) 22 In. Front Rotary Turf Brush 214.00


295.31


147.66




214.00


9.63


403.39


1,431.66



153.01





BM19744 Dew Whip Holder BracketFits Diesel RGM ONLY.

65.27


138.03

BTC10655 Direct Mount Cutting Unit Yoke Kit for MY 2009 # Current or QA5 Cutting Units1 Required for front cutting units to install Direct Mount Grass Catchers.

587.43

BTC10630 Direct Mount Front Grass Catcher2 needed for complete machine for 2500#s.1 needed for 220 E-Cut Hybrid Walk Greens Mower.

179.76

BM24900 Direct Mount QA5 Grass Catcher Brackets2 Needed for complete machine 2500's.

69.56



03 December 2014 U.S.G-10- 39


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCB11721 Grass Catcher Mounting Kit

Set of 3 Mounting Hardware for weight transfer system grass catcher.143.39


179.76

BM19739 Greens Mower Convenience KitFor Diesel Models ONLY; Contains Storage Area Pad and Elastic Storage Retainer.

83.46





55.64


49.21


160.50


148.73




BTC10071 Tires and Wheels (20x10.00-10), (3) Smooth 4 Ply-RatedLowest Recommended Tire pressure 15 PSI (1.03 bar). Due to higher pressures may causemarking on soft greens.

490.06



149.80



64.20


145.51


64.20



03 December 2014 U.S.G-10- 40


SUGGESTEDLIST PRICE

USD ($)



243.96


243.96


243.96


174.41



350.96


425.86


368.09



03 December 2014 U.S.G-10- 41

19.6 HP* (14.6 kW) Gross Per SAEJ1995 @ 3000 RPM (19.1, 14.2 kWLiquid Cooled Three Cylinder IDIDiesel Engine2 Post SAE J21294 Roll OverProtection Structure with SeatBelts2 Pedal Foot ControlledHydrostatic DriveHydraulic Reel MotorsSingle Reel PumpMicro-Lap Backlapping ValveOil Cooler

3WD GRIP AWD Traction SystemPower Steering20x10-10.00 Front Turf Tires20x10-8.00 Rear Turf TiresHour MeterOn Board Diagnostic White BoxControllerFour Function LED WarningMonitor7.4 Gallon (28 L) Fuel CapacityBCI Group 40 Maintenance FreeBatteryJohn Deere Golf Operator Videos

and All Products Safety VideoDVD Set


SUGGESTEDLIST PRICE

USD ($)



1224TC 2653B PrecisionCut Trim and Surrounds Mower 25,559.00


001B Europe 11.00

001C Australia/NZ Same Price



OPERATORS MANUAL0443 All Other Countries No Charge

REEL CUTTING UNITS26 Inch E.S.P. Cutting Units:Includes Front Lift Arms and Yokes.

1204 (3) QA7 Five Blade 26 In. Cutting Units 7,560.00

1206 (3) QA7 Eight Blade 26 In. Cutting Units with 6.3 mm bedknife 8,010.00

30 Inch E.S.P. Cutting Units:Includes Front Lift Arms and Yokes.

1205 (3) QA7 Five Blade 30 In. Cutting Units 8,796.00

1207 (3) QA7 Eight Blade 30 In. Cutting Units 9,366.00

1290 Less Cutting Units, Front Lift Arms and Yokes In Base Price


2653B PrecisionCut Trim and Surrounds MowerEquipment for Base Machine

03 December 2014 U.S.G-10- 42


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS26 Inch Front Rollers:

1315 (3) 3 In. (7.6 cm) Diameter Heavy Duty Smooth Solid Front Rollers 969.00

1316 (3) 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front Rollers 1,119.00

1317 (3) 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers With Spiral End Caps 1,317.00

30 Inch Front Rollers:1318 (3) 3 In. (7.6 cm) Diameter Heavy Duty Smooth Solid Front Rollers 1,377.00

1319 (3) 3 In. (7.6 cm) Diameter Heavy Duty Machined Grooved Disc Front Rollers 1,527.00

1329 (3) 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers With Spiral End Caps 1,725.00

1390 Less Front Rollers In Base Price





Needed for ALL 30" Cutting units and if NOT installing Rear Roller Power Brush or GTCKits on 26" Cutting Unit.

In Base Price

1404 (3) Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on 26" Cutting Unit.

228.00

1409 (3) FTC/GTC ONLY Counter Weight KitNeeded if ONLY installing FTC on 26" cutting unit.

Same Price

1490 Less Counter Weight kitOrdered if Both Rear Roller Power Brush and FTC Kit installed on 26" Cutting Unit.

-180.00


9736 Grass Catchers with Mounting Hardware for 26 Inch Cutting Unit (Set of 3)Not Compatible if Rear Roller Power Brush Installed.

1,223.00

9741 (3) QA7 26 In. Fairway Tender Conditioners Shaft and BladesRequires order code 9016.

1,527.00

9744 (3) QA7 FTC Gear DriveRequires order code 9015.

3,681.00

9747 (3) QA7 26 In. Rear Roller Power BrushRequires order code 9018. NOT Compatible with Grass Catchers.

516.00


2653B PrecisionCut Trim and Surrounds MowerContinued

03 December 2014 U.S.G-10- 43


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9749 (3) QA7 26 In. Rear Roller Power Brush Drive

Requires order code 9017. NOT Compatible with Grass Catchers.1,131.00

9759 (3) 30 In. 3 In. Diameter Heavy Duty Grooved Roller Scrapers 429.00

9757 26 In. Smooth Roller Scrapers (Set of 3)Requires (3) TCA19587 from parts. Not compatibleif Rear Roller Power Brush installed.

138.00

9760 (3) 26 In. 3 In. Diameter Heavy Duty Grooved Roller ScraperNot compatible with Fairway Tender Conditioners (FTC).

396.00

9762 30 In. Smooth Roller Scrapers (Set of 3)Requires (3) TCA19587 from parts.

187.00

9807 (3) 8 Blade QA7 less front rollers 7,038.00

9808 (3) 30 In. 8 Blade QA7 less front rollers 8,085.00

ATTACHMENTS FOR FIELD CONVERSIONCE Kit:

BTC10256 Battery Label KitThis kit must be ordered to meet battery labeling requirement in Brazil.

No Charge

Cutting Units:BM24124 (1) QA7 Eight Blade 26 In. Cutting Unit with 6.3mm bedknife 2,510.21

BM24126 (1) QA7 Eight Blade 30 In. Cutting Unit 2,883.66

BM24123 (1) QA7 Five Blade 26 In. Cutting Unit with 6.3mm bedknife 2,349.71

BM24125 (1) QA7 Five Blade 30 In. Cutting Unit 2,680.36

Miscellaneous:BM22759 (1) 26 In Grass Catcher (3 needed for complete machine)

Requires BM18185 Orifice Kit.335.99

BM23005 (1) 26 In. 3 In. Diameter Heavy Duty Grooved Roller ScraperNot compatible with Fairway Tender Conditioners (FTC).

138.03

BM23004 (1) 30 In. 3 In. Diameter Heavy Duty Grooved Roller Scraper 149.80

BM22763 (1) Conversion Mounting Kit old Machine to New QA7 Cutting UnitsContains Parts to Convert (1) Cutting Unit.

73.83

BM22672 (1) QA7 26 In. Fairway Tender Conditioners Shaft and BladesAlso need order code 9016 (BM22673).

544.63

BM22669 (1) QA7 26 In. Rear Roller Power BrushAlso need order code 9018 (BM22674).NOT Compatible with Grass Catchers.

180.83

BM22674 (1) QA7 26 In. Rear Roller Power Brush Drive 403.39

BM22673 (1) QA7 FTC Gear Drive 1,312.89



03 December 2014 U.S.G-10- 44


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22764 1) Conversion Mounting Kit 2009 Machine to Old Cutting ESP Cutting units

Contains Parts to Convert (1) Cutting Unit.71.69

BM17683 26 In. Smooth Roller Scrapers (Set of 3) 144.46


AM117680 Arm Rest Kit See Parts

ET17752 Bedknife Hi-Cut, 26-in 15.8 mm See Parts

BM18185 Grass Catcher Orifice1) Kit Required for installation of Grass Catchers on2653B, Not required for 7200.

36.39

TCU13823 Height of Cut Guage Bar See Parts

TCB11353 Lift Arms, Front (26 In. Right Hand and Left Hand) 415.16


TCB11065 Light Bracket Kit, FrontRequired to Mount BM19746 Front Light Kit.

90.96


BM22760 Mounting Hardware for 26 In Grass Catcher (set of 3) 256.80

TCB11107 Seat, Deluxe Suspension with Armrests 819.61

TCB11106 Seat, Standard 452.61

TCB11374 Yokes, Front (26 In. Right Hand and Left Hand) 604.56




64.20


64.20

BM22721 (1) QA7 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on 26" Cutting Unit.

145.51

Rollers:BM17670 (1) 26 In. 3 In. (7.6 cm) Diameter Heavy Duty

Grooved Disc Front Roller406.60


352.03


469.73



03 December 2014 U.S.G-10- 45


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM18438 (1) 30 In. 3 In. (7.6 cm) Diameter Heavy Duty



491.13


615.26



03 December 2014 U.S.G-10- 46

Three Cylinder 21.2 HP (15.8 kw)Diesel EngineeHydro Electronic ControlledHydrostatic Drive(3) Independent Wheel MotorsGRIP All Wheel DriveWidth On Demand 68-in (173 cm); 72-In (183 cm)Reach Trimming System withMaximum 14 In. (38cm) or 20 In.(50.8 cm) Shiftoutside front tire with 26-In(66 cm) or 30-In (76 cm)Power Steering with StraightTrack Steering CylinderInternal Wet Disc Brakes

(2) 24x12-12 Turf Trac FrontDrive Tires(1) 24x12-12 Multi Trac RearDrive TireDeluxe Suspension Seat withRetractableSeatbeltTechControl Display with builtin Machine Settings Controls andElectrical DiagnosticsOne-Touch Lift/Lower JoystickControlFoot Activated Tilt SteeringColumn(3) Hydraulic Motors(3) QA7 26 In. Cutting Units

2-Post Roll Over ProtectionStructureCommand Arm Operator Controls12 U.S. Gallon Fuel CapacityJohn Deere Golf Operator Videosand All Products Safety Video

DVD Set


SUGGESTEDLIST PRICE

USD ($)



1760TC 7200A PrecisionCut Trim and Surrounds Mower 38,920.00


001B Europe 86.00

001C Australia/NZ Same Price



OPERATORS MANUAL0443 All Other Countries No Charge


1204 (3) QA7 Five Blade 26 In. Cutting Units -450.00

1206 (3) QA7 Eight Blade 26 In. Cutting Units with 6.3 mm bedknife In Base Price


1205 (3) QA7 Five Blade 30 In. Cutting Units 801.00



7200A PrecisionCut Trim and Surrounds MowerEquipment for Base Machine

03 December 2014 U.S.G-10- 47


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNITS Continued...1290 Less Cutting Units, Front Lift Arms and Yokes -8,106.00


1315 (3) 3 In. (7.6 cm) Diameter Heavy Duty Smooth Solid Front Rollers -150.00

1316 (3) 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front Rollers In Base Price

1317 (3) 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers With Spiral End Caps 198.00

30 Inch Front Rollers:1318 (3) 3 In. (7.6 cm) Diameter Heavy Duty Smooth Solid Front Rollers 258.00

1319 (3) 3 In. (7.6 cm) Diameter Heavy Duty Machined Grooved Disc Front Rollers 408.00

1320 (3) 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers With Spiral End Caps 606.00

1390 Less Front Rollers -1,119.00


Needed for ALL 30" Cutting units and if NOT installing Rear Roller Power Brush or GTCKits on 26" Cutting Unit.

In Base Price


228.00


Same Price


-180.00


9736 Grass Catchers with Mounting Hardware for 26 Inch Cutting Unit (Set of 3)Not Compatible if Rear Roller Power Brush Installed.

1,188.00

9741 (3) QA7 26 In. Fairway Tender Conditioners Shaft and BladesRequires order code 9016.

1,527.00


3,681.00


516.00

9749 (3) QA7 26 In. Rear Roller Power Brush DriveRequires order code 9017. NOT Compatible with Grass Catchers.

1,131.00



7200A PrecisionCut Trim and Surrounds MowerContinued

03 December 2014 U.S.G-10- 48


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9757 26 In. Smooth Roller Scrapers (Set of 3)

Requires (3) TCA19587 from parts. Not compatibleif Rear Roller Power Brush installed.

138.00


396.00


187.00

9767 Joystick Kit 998.00

9766 Light Kit 281.00

9764 Canopy 550.00

ATTACHMENTS FOR FIELD CONVERSIONCutting Units:

BM24124 (1) QA7 Eight Blade 26 In. Cutting Unit with 6.3mm bedknife 2,510.21







138.03


BM22672 (1) QA7 26 In. Fairway Tender Conditioners Shaft and BladesAlso need order code 9016 (BM22673).

544.63


180.83






BTC10338 Canopy 588.50




03 December 2014 U.S.G-10- 49


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10393 Joystick Kit 1,067.86



BTC10347 Light Kit 300.67






64.20


64.20


145.51




352.03


469.73

BM18438 (1) 30 In. 3 In. (7.6 cm) Diameter Heavy DutyGrooved Disc Front Roller

544.63


491.13


615.26



03 December 2014 U.S.G-10- 50

*Engine HP is Provided by theEngine Manufacturer to be Usedfor Comparison Purposes Only.Actual Operating HP will beLess. Refer to the enginemanufacturer#s web site foradditional information.

Gross Engine HP* 26.4 (19.69 kW)@ 2600 rpmNet Engine HP* 25.0 (18.64 kW)@2600 rpmThree Cylinder TurboDiesel EngineHydrostatic Drive(3) Independent Wheel MotorsGRIP All Wheel DriveWidth On Demand 68-in (173 cm); 72-In (183 cm)Reach Trimming System with

Maximum 14 In. (38cm) or 20 In.(50.8 cm) Shiftoutside front tire with 26-In(66 cm) or 30-In (76 cm)Power Steering with StraightTrack Steering CylinderDual Disc Brakes(2) 24x12-12 Turf Trac FrontDrive Tires(1) 24x12-12 Multi Trac RearDrive TireDeluxe Suspension Seat withRetractableSeatbeltWhite Box Controller withOn-Board Diagnostics

One-Touch Lift/Lower JoystickControlFoot Activated Tilt SteeringColumn

(3) Hydraulic Motors(3) QA7 26 In. Cutting Units2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterCommand Arm Operator Controls13 U.S. Gallon Fuel CapacityJohn Deere Golf Operator Videosand All Products Safety Video

DVD Set


SUGGESTEDLIST PRICE

USD ($)



1702TC 7200 PrecisionCut Trim and Surrounds Mower 38,535.00


1005 (3) QA7 Five Blade 26 In. Cutting Units with 6.3 mm bedknife -450.00

1006 (3) QA7 Eight Blade 26 In. Cutting Units with 6.3 mm bedknife In Base Price


1007 (3) QA7 Five Blade 30 In. Cutting Units 801.00


1010 Less Cutting Units, Front Lift Arms and Yokes -8,106.00


2001 (3) 3 In. (7.6 cm) Diameter Heavy Duty SmoothSolid Front Rollers

-150.00

2002 (3) 3 In. (7.6 cm) Diameter Heavy Duty GroovedDisc Front Rollers

In Base Price


7200 PrecisionCut Trim and Surrounds MowerEquipment for Base Machine

03 December 2014 U.S.G-10- 51


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...2003 (3) 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers

With Spiral End Caps198.00

30 Inch Front Rollers:2004 (3) 3 In. (7.6 cm) Diameter Heavy Duty Smooth Solid

Front Rollers258.00

2005 (3) 3 In. (7.6 cm) Diameter Heavy Duty Machined GroovedDisc Front Rollers

408.00

2006 (3) 3 In. (7.6 cm) Diameter Spiral Grooved Front RollersWith Spiral End Caps

606.00



Needed for ALL 30" Cutting units and if NOTinstalling Rear Roller Power Brush or GTCKits on 26" Cutting Unit.

In Base Price


228.00


Same Price


-180.00

ATTACHMENTS - ORDER AS DESIREDCE Kit:

9330 Battery Label KitThis kit must be ordered to meet battery labeling requirement in Brazil.

No Charge

European CE Kit:9100 European CE Conversion Kit for 7200 PrecisionCut Trim and Surrounds Mower

Must be Ordered to Receive a 7200 Surround Mower Which MeetsCE Mark Requirements. Kit Includes Locking Hood Latch,Pictorial Decals and Operator's Manuals in English,French German, Spanish and Italian.

50.00

9101 European CE Conversion Kit for 26 In. and 30 In. Cutting UnitsMust be Ordered to Receive Decals that Convert (3) 26 In. or30 In. Cutting Unit to Meet CE Mark Requirements.

No Charge

9350 Compliance KitThis kit must be ordered to meet the EU country of France shielding regulations.

105.00

Miscellaneous:9000 Grass Catchers with Mounting Hardware for 26 Inch Cutting Unit

(Set of 3)Not Compatible if Rear Roller Power Brush Installed.

1,182.00


7200 PrecisionCut Trim and Surrounds MowerContinued

03 December 2014 U.S.G-10- 52


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9015 (3) QA7 26 In. Fairway Tender Conditioners Shaft and Blades



3,681.00


516.00

9018 (3) QA7 26 In. Rear Roller Power Brush DriveRequires order code 9017. NOT Compatible with Grass Catchers.

1,131.00



138.00


396.00


187.00


9345 Light Kit 239.00

9807 (3) 8 Blade QA7 less front rollers 7,038.00

9808 (3) 30 In. 8 Blade QA7 less front rollers 8,085.00



No Charge

Cutting Units:BM24124 (1) QA7 Eight Blade 26 In. Cutting Unit with 6.3mm bedknife 2,510.21







138.03




03 December 2014 U.S.G-10- 53


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22672 (1) QA7 26 In. Fairway Tender Conditioners Shaft and Blades

Also need order code 9016 (BM22673).544.63


180.83






TCB11728 Compliance KitThis kit must be ordered to meet the EU country of France shielding regulations.

114.49


TCB11296 Joystick Kit 1,067.86



TCB11462 Light Kit 255.73






64.20


64.20


145.51




352.03


469.73



03 December 2014 U.S.G-10- 54


SUGGESTEDLIST PRICE

USD ($)




491.13


615.26



03 December 2014 U.S.G-10- 55

Gross Engine HP 41.6 (31 kW)Three Cylinder TurboTier 4 Diesel EngineB20 CompatibleeHydro Electronic controlledServo Hydrostatic Drive withAutoPedalTwo Wheel DrivePower Steering with Doubleacting steering cylinderInternal Wet Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresFull Suspension Seatwith Armrest and RetractableSeat BeltTechControl Display with builtin Machine Settings Controls andElectrical Diagnostics

One-Touch Lift/Lower cuttingunit Joystick controlRear Cutting Unit AttachingPointFoot Activated TiltSteering ColumnOn-Board Backlappingwith Adjustable Reel SpeedcontrolFive Hydraulic Reel Motors withQuick Removal FeatureQuick-Tatch Cutting UnitsHydraulic Down Pressure withmechanical On/Off adjustability(5) QA5 7 Blade 22 In.(55.9 cm)Cutting Units with SpeedLinkHeight of Cut Adjustment System5 In. (12.7 cm) Diameter Reelswith Heavy Section Reel BladesAdjustable Bedknife with Notch

System2 In. DiameterMachined Grooved Solid Frontrollers2 In. Diameter Hollow SmoothRear rollers2-Post Roll OverProtection Structure3 Front Work LightsCommand Arm with OperatorControls


SUGGESTEDLIST PRICE

USD ($)



1511TC 7500A PrecisionCut Fairway Mower 63,377.00

DESTINATION001A United States/Canada In Base Price

OPERATOR MANUALS0443 English United States/Canada In Base Price

REEL CUTTING UNITS1201 (5) Quick Adjust 5 (QA5) Seven Blade 22 In.

Heavy Section Standard Cutting Units WithAdjustable 4.8 mm Bedknife, Less Front And Rear Rollers

In Base Price

1203 (5) Quick Adjust 5 (QA5) Eleven Blade 22 In.Heavy Section Standard Cutting Units WithAdjustable 2.0 mm Bedknife, Less Front And Rear Rollers

420.00


REEL FRONT ROLLERS1305 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front Rollers

Not compatible if FTC installed. 3 In. Diameter Front Rollers Raise the Minimum Heightof Cut.

500.00

1304 (5) 22 In. 2 In. (5cm) Diameter Machined Grooved Solid Front Rollers In Base Price

1303 (5) 22 In. 2 In. (5cm) Diameter Spiral Grooved Front Rollers 295.00


7500A PrecisionCut Fairway MowerEquipment for Base Machine

03 December 2014 U.S.G-10- 56


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...1307 (5) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers with Spiral End Caps


850.00


580.00


580.00

1302 (5) 22 In. 2 In (5cm) Diameter Hollow Smooth Roller -325.00


REEL REAR ROLLERS1602 (5) 22 In. 2 In (5cm) Diameter Hollow Smooth Roller In Base Price


905.00


905.00


REEL CUTTING UNIT COUNTER WEIGHTS1400 (5) QA5 Cutting Unit ONLY Counter Weight Kit


1402 (5) QA5 Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on Cutting Unit.

380.00


Same Price

1408 Less Counter Weight kitOrdered if Both Rear Roller Power Brush and FTC/GTC Kit installed.

-300.00

ATTACHMENTS - ORDER AS DESIRED9122 (5) Vertical Cutting Units with Front and Rear Rollers Less Motors 11,280.00

9733 (5) Grass Catchers with large paddle clip Mounting Hardware for QA5 Cutting Units andWing Latch Kit and grass catcher side plate inserts.

1,592.00

9737 (5) 22 In. Fairway Tender Conditioners (FTC) Shaft and BladesRequires QA5 GTC/FTC Gear Drive. Cannot be installed if using Front Rotary Turf Brushoption 3" roller when used on the QA5 is not compatible.

2,385.00

9743 (5) QA5 GTC/FTC Gear DriveUsed with FTC/GTC Shaft and Blades or Front Rotary Turf Brush.

6,135.00


7500A PrecisionCut Fairway MowerContinued

03 December 2014 U.S.G-10- 57


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9791 (5) QA5 22 In. Rear Roller Power Brushes

Requires QA5 Rear Roller Power Brush Drive.690.00

9748 (5) QA5 Rear Roller Power Brush DriveUsed with Rear Roller Power Brush.

1,885.00

9751 (5) 22 In. Front Rotary Turf BrushCannot be installed if using FTC/GTC Shaft and Blades Kit.

1,000.00

9752 Hydraulic Down Pressure KitIncrease down pressure weight added to cutting units.

904.00

9753 4WD Conversion KitConverts 2WD Traction Unit into 4WD Traction Unit.

4,524.00

9756 (5) 22 In. Smooth Roller Scrapers 75.00

9763 (5) QA5 Grass Catcher Lip ExtensionThis kit extends the front lip of the grass catcher closer to the reel.

45.00

9764 CanopyThis kit includes canopy,frame and brackets toattach to ROPS.

550.00

9792 Air Ride Suspension KitThis kit contains suspension base to replace existing mechanical spring base of standardsuspension seat.

755.00

Miscellaneous:9803 (5) 11 blade QA5 cutting units less front and rear rollers 11,400.00

9804 (5) 7 blade QA5 cutting units less front and rear rollers 10,980.00











2,349.71



03 December 2014 U.S.G-10- 58


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Engine:

TCA19917 B20 Biodiesel Conversion KitThis kit converts one machine to use B20 Diesel fuel.

See Parts





147.66




9.63


403.39



153.01

BTC10391 4WD Conversion Kit 4,840.69

BTC10392 Air Ride Suspension KitThis kit contains suspension base to replace existing mechanical spring base of standardsuspension seat.

807.86


BTC10217 Front High Capacity Catcher with large paddle clip3 needed for front location on Fairway Mowers.

188.31


188.31

BTC10605 Grass Catcher Mounting Kit (set of 5) 1 needed per machine 113.41

BTC10216 Grass Catcher with large paddle clip (22 Low Profile)2 needed for complete machine for 2500#s.2 needed for rear locations for Fairway Mowers.1 needed for 180 & 220 E-Cut Hybrid Walk Greens Mower.

179.76


179.76




03 December 2014 U.S.G-10- 59


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10346 Hydraulic Down Pressure Kit 967.29


BM24199 QA5 Grass Catcher Side Plate Insert2 Needed for complete machine 2500's.3 Needed for rear and front center locations for 7500/8500 Fairway Mowers.1 Needed for 180 & 220 E-Cut Hybrid Walk Greens Mowers.5 Needed for 8000 E-Cut Hybrid Fairway Mower.

49.21

BM24372 QA5 Slope Leveling Kit1 per cutting unit.

66.34

BTC10194 Wing Latch KitNeeded to Secure Wing Grass Catchers when in Transport Position.

295.31



64.20


145.51


64.20



243.96


243.96

BM19821 (1) 22 In. 2 In. (5 cm) Diameter Spiral Grooved Front Roller 307.09

BTC10267 (1) 22 In. 2 In. (5cm) MT Grooved RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

368.09


350.96


425.86

BM23566 (1) 2X22" MT SPIRAL RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

368.09



03 December 2014 U.S.G-10- 60



03 December 2014 U.S.G-10- 61

Gross Engine HP 41.6 (31 kW)Three Cylinder TurboTier 4 Diesel EngineB20 CompatibleeHydro Electronic controlledServo Hydrostatic Drive withAutoPedalTwo Wheel DrivePower Steering with Doubleacting steering cylinderInternal Wet Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresFull Suspension Seatwith Armrest and RetractableSeat BeltTechControl Display with built

in Machine Settings Controls andElectrical DiagnosticsOne-Touch Lift/Lower cuttingunit Joystick controlRear Cutting Unit AttachingPointFoot Activated TiltSteering ColumnOn-Board Electric Backlappingwith Adjustable Reel SpeedControl

Five Electric Reel MotorsQuick-Tatch Cutting UnitsAdjustable HydraulicHydraulic Down Pressure withmechanical On/Off adjustability(5) QA5 7 Blade 22 In.(55.9 cm)Cutting Units with SpeedLink

Height of Cut Adjustment System5 In. (12.7 cm) Diameter Reelswith Heavy Section Reel BladesAdjustable Bedknife with NotchSystem2 In. DiameterMachined Grooved Solid Frontrollers


SUGGESTEDLIST PRICE

USD ($)



1781TC 7500A E-Cut Hybrid Fairway Mower Diesel 66,599.00





In Base Price

1203 (5) Quick Adjust 5 (QA5) Eleven Blade 22 In.Heavy Section Standard Cutting Units WithAdjustable 2.0 mm Bedknife, Less Front And Rear Rollers

420.00




500.00

1304 (5) 22 In. 2 In. (5cm) Diameter Machined Grooved Solid Front Rollers In Base Price


1307 (5) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers with Spiral End Caps 850.00


7500A E-Cut Hybrid Fairway Mower DieselEquipment for Base Machine

03 December 2014 U.S.G-10- 62


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...Not compatible if FTC installed. 3 In. Diameter Front Rollers Raise the Minimum Heightof Cut.


580.00


580.00

1302 (5) 22 In. 2 In (5cm) Diameter Hollow Smooth Roller -325.00




905.00


905.00





380.00


Same Price


-300.00

ATTACHMENTS - ORDER AS DESIRED9733 (5) Grass Catchers with large paddle clip Mounting Hardware for QA5 Cutting Units and

Wing Latch Kit and grass catcher side plate inserts.1,592.00

9737 (5) 22 In. Fairway Tender Conditioners (FTC) Shaft and BladesRequires QA5 GTC/FTC Gear Drive. Cannot be installed if using Front Rotary Turf Brushoption 3" roller when used on the QA5 is not compatible.

2,385.00


6,135.00

9791 (5) QA5 22 In. Rear Roller Power BrushesRequires QA5 Rear Roller Power Brush Drive.

690.00


7500A E-Cut Hybrid Fairway Mower DieselContinued

03 December 2014 U.S.G-10- 63


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9748 (5) QA5 Rear Roller Power Brush Drive

Used with Rear Roller Power Brush.1,885.00

9751 (5) 22 In. Front Rotary Turf BrushCannot be installed if using FTC/GTC Shaft and Blades Kit.

1,000.00

9752 Hydraulic Down Pressure KitIncrease down pressure weight added to cutting units.

904.00


4,524.00



45.00


550.00


755.00













2,439.60


2,349.71



03 December 2014 U.S.G-10- 64


SUGGESTEDLIST PRICE

USD ($)



See Parts





147.66




9.63


403.39



153.01



807.86



188.31


188.31



179.76


179.76




03 December 2014 U.S.G-10- 65


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10346 Hydraulic Down Pressure Kit 967.29



49.21


66.34


295.31



64.20


145.51


64.20



243.96


243.96



368.09


350.96


425.86


368.09



03 December 2014 U.S.G-10- 66



03 December 2014 U.S.G-10- 67

Gross Engine HP 41.6 (31 kW)Three Cylinder TurboTier 4 Diesel EngineB20 CompatibleeHydro Electronic controlledServo Hydrostatic Drive withAutoPedalTwo Wheel DrivePower Steering with Doubleacting steering cylinderInternal Wet Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresFull Suspension Seatwith Armrest and RetractableSeat BeltTechControl Display with builtin Machine Settings Controls andElectrical Diagnostics

One-Touch Lift/Lower cuttingunit Joystick controlRear Cutting Unit AttachingPointFoot Activated TiltSteering ColumnOn-Board Backlappingwith Adjustable Reel SpeedcontrolFive Hydraulic Reel Motors withQuick Removal FeatureQuick-Tatch Cutting UnitsHydraulic Down Pressure withmechanical On/Off adjustability(5) QA7 8 Blade 22 In.(55.9 cm)Cutting Units with SpeedLinkHeight of Cut Adjustment System7 In. (17.8 cm) Diameter Reelswith Reel to Bedknife with NotchAdjustment

22 In. 3 In. (7.6 cm) DiameterHeavy Duty Grooved Disc Roller22 In. 3 In. (7.6 cm) DiameterSmooth Rear Roller2-Post Roll OverProtection Structure3 Front Work LightsCommand Arm with OperatorControls


SUGGESTEDLIST PRICE

USD ($)






REEL CUTTING UNITS1208 (5) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units with 6.3 mm Bedknife Less

Front Rollers, Motors and counter weightIn Base Price

1209 (5) Quick Adjust 7 (QA7) Ten Blade 22 In. Cutting Units with 6.3 mm Bedknife, LessFront Rollers, Motors and counter weights

265.00


REEL FRONT ROLLERS1305 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front Rollers In Base Price



REEL CUTTING UNIT COUNTER WEIGHTS1401 (5) QA7 Cutting Unit ONLY Counter Weight Kit In Base Price



03 December 2014 U.S.G-10- 68


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...Needed if NOT installing Rear Roller Power Brush or GTC/FTC Kits.

1403 (5) QA7 Reel Cutting Unit Brush Only Counter Weight KitNeeded if only installing Rear Roller Power Brush on Cutting Unit.

380.00


Same Price


-300.00

DRIVE SYSTEM1190 2WD Traction Unit In Base Price

1191 Factory Installed 4WD Traction Unit 4,566.00

ATTACHMENTS - ORDER AS DESIRED9123 (5) QA7 Vertical Cutting Units with Front and Rear Rollers

Less Motors9,245.00

9734 (5) Grass Catchers with large paddle clip Mounting Hardware for QA7 Cutting Units andWing Latch

1,279.00

9739 (5) QA7 22" Fairway Tender Conditioners Shaft and BladesRequires QA7 FTC Gear Drive.

2,595.00

9744 (5) QA7 FTC Gear DriveRequires QA7 FTC Shaft and Blades.

6,135.00

9746 (5) QA7 22" Rear Roller Power BrushesRequires QA7 Rear Roller Power Brush Drive.

690.00

9749 (5) QA7 Rear Roller Power Brush DriveUsed with QA7 Rear Roller Power Brush

1,885.00


4,524.00

9756 (5) 22 In. Smooth Roller ScrapersRequires (5) TCA19587 from parts.

207.00


550.00

9754 (5) 22 In. 3 In. Diameter Heavy DutyGrooved Disc Roller Scrapers

715.00


755.00

Miscellaneous:9806 (5) 10 Blade QA7 cutting units less front roller 13,605.00

9807 (5) 8 Blade QA7 cutting units less front roller 13,340.00



03 December 2014 U.S.G-10- 69


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSIONCutting Units:

BM22461 (1) QA7 Vertical Cutting Units with Front RollersLess Motors

1,978.43

BM22463 (1) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting UnitsLess Front Rollers and Motors

2,854.76

BM24121 (1) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units with 6.3 mm bedknifeLess Front Rollers, Motors and counter weight

2,854.76

BM22464 (1) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting UnitsLess Front Rollers and Motors

2,911.47

BM24122 (1) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting Units with 6.3 mm bedknife,Less Front Rollers, Motors and counter weights

2,911.47



Miscellaneous:BM22763 (1) Conversion Mounting Kit old Machine to New QA7 Cutting Units


BM22693 (1) QA7 22" Fairway Tender Conditioners Shaft and BladesAlso need order code 9016 (BM22673).

555.33

BM22712 (1) QA7 22" Rear Roller Power BrushAlso need order code 9018 (BM22674).

147.66


BM22673 (1) QA7 FTC Gear DriveAlso need order code 9015 (BM22693).

1,312.89

BM17684 (5) 22 In. Smooth Roller ScrapersRequires (5) TCA19587 from parts.

221.49

BM22764 1) Conversion Mounting Kit 2009 Machine to Old Cutting ESP Cutting unitsContains Parts to Convert (1) Cutting Unit.

71.69


153.01



807.86

AMT663 Bar Gauge Kit See Parts

MT1928 Bedknife, Low-Cut Fairway See Parts




03 December 2014 U.S.G-10- 70


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10217 Front High Capacity Catcher with large paddle clip

3 needed for front location on Fairway Mowers.188.31


188.31

TCB11414 Front Wing Latch Kit (Set of 2) 1 per machineNeeded to Secure Wing Grass Catchers when in Transport Position.

230.06

BM22756 Grass Catcher Mounting Kit ( set of 5) 1 needed per machine 214.00


179.76


179.76





64.20


64.20


145.51




425.86



03 December 2014 U.S.G-10- 71

Gross Engine HP 41.6 (31 kW)Three Cylinder TurboTier 4 Diesel EngineB20 CompatibleeHydro Electronic controlledServo Hydrostatic Drive withAutoPedalThree Wheel DrivePower Steering with Doubleacting steering cylinderInternal Wet Disc Brakes80 In. (2.03 m) Cutting Width24x13 -12 Smooth Drive Tires24x13 -12 Smooth Steer TiresFull Suspension Seatwith Armrest and RetractableSeat BeltTechControl Display with builtin Machine Settings Controls and

Electrical DiagnosticsOne-Touch Lift/Lower cuttingunit Joystick controlRear Cutting Unit AttachingPointFoot Activated TiltSteering ColumnOn-Board Backlappingwith Adjustable Reel SpeedcontrolFive Electric Reel Motors WITHQuick Removal FeatureQuick-Tatch Cutting UnitsHydraulic Down Pressure withmechanical On/Off adjustability(5) QA5 11 Blade 18 In. (45.7cm) Cutting Units with SpeedLinkHeight of Cut Adjustment System2 In. Diameter

Machined Grooved Solid FrontRollers2 In. Diameter Hollow SmoothRear Rollers2-Post Roll OverProtection Structure3 Front Work LightsCommand Arm with OperatorControls


SUGGESTEDLIST PRICE

USD ($)



1771TC 8000A E-Cut Hybrid Fairway Mower Diesel 61,879.00



REEL CUTTING UNITS1200 (5) Quick Adjust 5 (QA5) Seven Blade 18 In. Heavy Section Standard Cutting

Units with 4.8 mm Bedknife, Yokes, less Front and Rear Rollers, Motors and CounterWeights

-1,235.00

1202 (5) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with 2.0 mm Bedknife,Yokes, less Front and Rear Rollers, Motors and Counter Weight

In Base Price




800.00

1309 (5) 18 In. 2 In. (5 cm) Diameter Machined Smooth Solid Front Roller Same Price

1310 (5) 18 In. 2 In. (5cm) Diameter Grooved Front Rollers In Base Price

1311 (5) 18 In. 2 In. (5cm) Spiral Grooved Front Rollers with Spiral end Caps 815.00


8000A E-Cut Hybrid Fairway Mower DieselEquipment for Base Machine

03 December 2014 U.S.G-10- 72


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...

1319 (5) 18 In. 2 In. (5 cm) MT Spiral Roller 450.00

1321 (5) 18 In. 2 In. (5 cm) MT Grooved Roller 815.00

1322 (5) 18 In. 2 In. (5 cm) Diameter Hollow Smooth Roller -170.00


REEL REAR ROLLERS1622 (5) 18 In 2 In (5cm) Diameter Hollow Smooth Roller In Base Price


620.00


985.00





380.00


Same Price


-300.00

ATTACHMENTS - ORDER AS DESIRED9735 (5) Grass Catchers with large paddle clip, shield extensions with Mounting Hardware for

18" QA5 Cutting Units and grass catcher side plate inserts.1,565.00

9740 (5) QA5 18"" Fairway Tender Conditioners Shaft (FTC) and BladesRequires QA5 GTC/FTC Gear Drive. Not compatible with 3 In roller option.

2,385.00


6,135.00

9745 (5) QA5 18 In. Rear Roller Power BrushesRequires QA5 Rear Roller Power Brush Drive.

690.00

9748 (5) QA5 Rear Roller Power Brush DriveUsed with Rear Roller Power Brush.

1,885.00



45.00



03 December 2014 U.S.G-10- 73


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...


550.00

9758 (5) 18 In. 3 In. Diameter Heavy Duty Grooved Roller ScrapersNot compatible with Fairway Tender Conditioner option 9740.

675.00






ET17751 Bedknife, Hi-cut Fairway 12 mm See Parts

TCU31422 Bedknife, Hi-cut Fairway 7.6 mm See Parts

TCU252299 Bedknife, Lo-cut Fairway 4.8 mm See Parts

MT3883 Bedknife, Ultra Lo-cut Fairway 6.3 mm See Parts

Cutting Units:BM22479 (1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with Yokes, less Front

Rollers, Motors and Counter WeightIncludes Rear Roller

2,620.43

BM24128 (1) Quick Adjust 5 (QA5) Eleven Blade 18 In. Cutting Units with Yokes, less Front andRear Rollers, Motors and Counter Weight

2,556.23

BM25125 (1) Quick Adjust 5 (QA5) Seven Blade 18 In. Heavy Section Standard CuttingUnits with 4.8mm bedknife, Less Front and Rear Rollers, Motors and Counter Weights

2,291.94

Miscellaneous:TCA19585 (1) 18 In 2 In Grooved Roller Scraper

Need to order 5 for completed machine.See Parts

BM23014 (1) 18 In. 3 In. Diameter Heavy Duty Grooved Roller ScraperNot compatible with Fairway Tender Conditioner option 9015 (BM22670).

134.81

BTC10717 (1) 18 In. Front Grass Catcher with large paddle clip 124.00

BTC10214 (1) 18 In. Rear Grass Catcher with large paddle clip 195.81

BM23015 (1) 18 In. Smooth Rear Roller Scraper 16.06


BM22670 (1) QA5 18 In. Fairway Tender Conditioners Shaft (FTC) and BladesRequires GTC/FTC Gear Drive (BM22469).Not compatible with 3 In roller option 2001 (BM23016).

510.39



03 December 2014 U.S.G-10- 74


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22667 (1) QA5 18 In. Rear Roller Power Brushes

Requires Rear Roller Power Brush Drive (BM22527).147.66


9.63


403.39





49.21


66.34

TCU25388 UltraTrac Fairway Mower Tire See Parts



64.20


145.51


64.20



210.79

BM22868 (1) 18 In. 2 In. (5cm) Diameter Grooved Front Rollers 210.79

BM22879 (1) 18 In. 2 In. (5cm) Spiral Grooved Front Roller with Spiral end Cap 385.20

TCA19509 (1) 18 In. 3 In (7.6 cm) Diameter Smooth Front or Rear Roller (Hollow)Not compatible with Fairway Tender Conditioners (FTC).

See Parts

BM23016 (1) 18 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front RollersNot compatible if FTC installed.3 In. Diameter Front Rollers Raisethe Minimum Height of Cut.

385.20



03 December 2014 U.S.G-10- 75


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10281 (1) 18 in. 2 in. (5cm) MT Grooved Roller

NOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

385.20

BM23567 (1) 2X18" MT Spiral RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways. Forbest results install in front and rear roller location of cutting unit.

307.09



03 December 2014 U.S.G-10- 76

Gross Engine HP 55.6 (41.6 kW)Four CylinderTier 4 Turbo Diesel EngineB20 CompatibleeHydro Electronic controlledServo Hydrostatic Drive withAutoPedalTwo Wheel DrivePower Steering with Doubleacting steering cylinderInternal Wet Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresFull Suspension Seatwith Armrest and RetractableSeat BeltTechControl Display with builtin Machine Settings Controls andElectrical Diagnostics

One-Touch Lift/Lower cuttingunit Joystick controlRear Cutting Unit AttachingPointFoot Activated TiltSteering ColumnOn-Board Backlappingwith Adjustable Reel SpeedcontrolFive Hydraulic Reel Motors withQuick Removal FeatureQuick-Tatch Cutting UnitsHydraulic Down Pressure withmechanical On/Off adjustability(5) QA7 22 In. (55.9 cm) EightBlade Cutting Units 7 In. (17.8cm) DiameterReel to Bedknife with NotchAdjustments and SpeedLInk Hieghtof Cut System

22 In. 3 In. (7.6 cm) DiameterHeavy Duty Grooved Disc Roller22 In. 3 In. (7.6 cm) DiameterSmooth Rear Roller2-Post Roll OverProtection Structure3 Front Work LightsCommand Arm with OperatorControls


SUGGESTEDLIST PRICE

USD ($)






REEL CUTTING UNITS1208 (5) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units with 6.3 mm Bedknife Less


1209 (5) Quick Adjust 7 (QA7) Ten Blade 22 In. Cutting Units with 6.3 mm Bedknife, LessFront Rollers, Motors and counter weights

265.00


REEL FRONT ROLLERS1305 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Front Rollers In Base Price



REEL CUTTING UNIT COUNTER WEIGHTS1401 (5) QA7 Cutting Unit ONLY Counter Weight Kit In Base Price



03 December 2014 U.S.G-10- 77


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...Needed if NOT installing Rear Roller Power Brush or GTC/FTC Kits.


380.00


Same Price


-300.00

ATTACHMENTS - ORDER AS DESIRED9734 (5) Grass Catchers with large paddle clip Mounting Hardware for QA7 Cutting Units and

Wing Latch1,279.00

9739 (5) QA7 22" Fairway Tender Conditioners Shaft and BladesRequires QA7 FTC Gear Drive.

2,595.00

9744 (5) QA7 FTC Gear DriveRequires QA7 FTC Shaft and Blades.

6,135.00

9746 (5) QA7 22" Rear Roller Power BrushesRequires QA7 Rear Roller Power Brush Drive.

690.00

9749 (5) QA7 Rear Roller Power Brush DriveUsed with QA7 Rear Roller Power Brush

1,885.00


4,524.00


207.00


550.00


715.00

Miscellaneous:9806 (5) 10 Blade QA7 cutting units less front roller 13,605.00





Cutting Units:BM22461 (1) QA7 Vertical Cutting Units with Front Rollers

Less Motors1,978.43



03 December 2014 U.S.G-10- 78


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22463 (1) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units

Less Front Rollers and Motors2,854.76


2,854.76


2,911.47


2,911.47






555.33


147.66



1,312.89


221.49

BM22764 1) Conversion Mounting Kit 2009 Machine to Old Cutting ESP Cutting unitsContains Parts to Convert (1) Cutting Unit.

71.69


153.01



807.86





188.31



03 December 2014 U.S.G-10- 79


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10719 Front High Capacity Catcher with large paddle clip

3 needed for front location on Fairway Mowers.188.31


230.06



179.76


179.76





64.20


64.20


145.51




425.86



03 December 2014 U.S.G-10- 80

Gross Engine HP 37.1 (27.7 kW)Net Engine HP 35.7(26.55 kW)

@ 2600 RPMThree Cylinder Turbo DieselEngineServo Controlled HydrostaticDriveTwo Wheel DrivePower Steering with StraightTrack Steering CylinderDual Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresDeluxe Suspension Seat withArmrests and RetractableSeatbelt

White Box Controller withOn-Board DiagnosticsOne-Touch Lift/Lower Reel LeverElectric Over Hydraulic

Reel LiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Electric Backlappingwith Adjustable Reel Speed

ControlFive Electric Reel MotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5)QA5 7 Blade 22 In.(55.9 cm)Cutting Units

with Speed Link Height ofCut System

5 In. (12.7 cm) Diameter ReelsHeavy Section Reel Blades withAdjustable Bedknife with

Notch Adjustments2 In. Diameter Machined Grooved

Solid Front Rollers2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterRemovable Rear Cutting UnitUpstops3 Front Work LightsCommand Arm Operator Controls18 U.S. Gallon Fuel Capacity


SUGGESTEDLIST PRICE

USD ($)



1742TC 7500 E-Cut Hybrid Fairway Mower Diesel 59,873.00



In Base Price

1005 (5) Quick Adjust 5 (QA5) Eleven Blade 22 In. (55.9 cm)Cutting Units With Adjustable 2.0mm Bedknife,5 In. (12.7 cm) Diameter Reels, Less Front Rollers

420.00


REEL FRONT ROLLERS2001 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Rollers

Not compatible if FTC installed.3 In. Diameter Front Rollers Raisethe Minimum Height of Cut.

500.00

2002 (5) 22 In. 2 In. (5cm) Diameter Machined GroovedSolid Front Rollers

In Base Price


2004 (5) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers with Spiral End CapsNot compatible if FTC installed.3 In. Diameter Front Rollers Raisethe Minimum Height of Cut.

850.00


7500 E-Cut Hybrid Fairway Mower DieselEquipment for Base Machine

03 December 2014 U.S.G-10- 81


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...2005 (5) 22 In. 2 In. (5cm) MT Spiral Roller


580.00


580.00


2010 Less Front Rollers, Roller Adjusters and Skid Shoes -1,140.00


2502 (5) 22 In. 2 In. (5cm) MT Spiral RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways.For best results install in front and rear roller location of cutting unit.

905.00

2503 (5) 22 In. 2 In. (5cm) MT Grooved RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways.For best results install in front and rear roller location of cutting unit.

905.00





380.00


Same Price

4010 Less Counter Weight kit -295.00



No Charge

European CE Kit9100 European CE Conversion Kit, 8500 PrecisionCut Fairway Mower

Must be Ordered to Receive a PrecisionCut Fairway Mower Which Meets CERequirements. Kit Includes Electric Hood Switch, Pictorial Decals and Operator'sManuals in English, French, German, Spanish and Italian.

35.00

9102 European CE Reel Decal Kit for QA5 Cutting UnitsMust be Ordered to Receive Decals that Converts (5) QA5 Cutting Units to Meet CE MarkRequirements.

No Charge


135.00


7500 E-Cut Hybrid Fairway Mower DieselContinued

03 December 2014 U.S.G-10- 82


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...Miscellaneous:

9733 (5) Front Grass Catchers with large paddle clip Mounting Hardware for QA5 CuttingUnits, Rear Bail and Catchers w/handles, Wing Latch Kit and grass catcher side plateinserts kit for front center.Note: Cutting unit shield extensions should only be used in dry conditions.

1,592.00

9015 (5) 22 In. Fairway Tender Conditioners (FTC) Shaft and BladesRequires order code 9016.3" roller when used on the QA5 is not compatible with the FTC.

2,385.00

9017 (5) 22 In. Rear Roller Power BrushesRequires order code 9018 (BM22527).

690.00

9018 (5) Rear Roller Power Brush DriveRequires order code 9017 (BM22668).

1,885.00

9019 (5) 22 In. Front Rotary Turf BrushCan not be used with FTC/GTC 9015.Requires order code 9016.3" roller when used on the QA5 is not compatible with the FTC.

1,000.00

9020 Hydraulic Down Pressure Kit 904.00


4,524.00



45.00













2,349.71



03 December 2014 U.S.G-10- 83


SUGGESTEDLIST PRICE

USD ($)



See Parts

European CE Kit:TCB11727 Compliance Kit

This kit must be ordered to meet the EU country of France shielding regulations.147.66





147.66




9.63


403.39



153.01


TCB11460 Electronic Cruise Control Kit 268.57


188.31


188.31


BTC10216 Grass Catcher with large paddle clip (22 Low Profile) 179.76



TCB11128 Hydraulic Down Pressure Kit 967.29




03 December 2014 U.S.G-10- 84


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM24199 QA5 Grass Catcher Side Plate Insert

2 Needed for complete machine 2500's.1 Needed for front center location for 7500/8500 Fairway Mowers.1 Needed for 180 & 220 E-Cut Hybrid Walk Greens Mowers.3 Needed for front 8000 E-Cut Hybrid Fairway Mower.

49.21


66.34

BTC10501 Rear Grass Catcher Bail KitRequires 2 for complete machine & rear grass catcher BTC10408.

191.53

BTC10408 Rear Grass Catcher with HandlesRequires 2 for complete machine & rear grass catcher bail system BTC10501.

148.73


295.31



64.20


145.51


64.20



243.96


243.96



368.09


350.96


425.86



03 December 2014 U.S.G-10- 85


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM23566 (1) 2X22" MT SPIRAL Roller


368.09



03 December 2014 U.S.G-10- 86

Gross Engine HP 43.1 (32.2 kW)Net Engine HP 41.7 (31.1 kW)

@ 2600 rpmThree Cylinder TurboDiesel EngineServo Controlled HydrostaticDriveTwo Wheel DrivePower Steering with StraightTrack Steering CylinderDual Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresDeluxe Suspension Seat withArmrests and RetractableSeatbelt

White Box Controller withOn-Board DiagnosticsOne-Touch Lift/Lower Reel LeverElectric Over Hydraulic

Reel LiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Backlapping withAdjustabel Reel Speed ControlFive Standard Hydraulic ReelMotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5) QA5 7 Blade 22 In.(55.9 cm)Cutting Units

with Speed Link Height ofCut System

5 In. (12.7 cm) Diameter ReelsHeavy Section Reel Blades withAdjustable Bedknife with Nocth

Adjustments2 In. Diameter Machined Grooved

Solid Front Rollers2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterRemovable Rear Cutting UnitUpstops3 Front Work LightsCommand Arm Operator Controls18 U.S. Gallon Fuel Capacity


SUGGESTEDLIST PRICE

USD ($)



1473TC 8500 PrecisionCut Fairway Mower 60,299.00



In Base Price

1005 (5) Quick Adjust 5 (QA5) Eleven Blade 22 In. (55.9 cm)Cutting Units With Adjustable 2.0mm Bedknife,5 In. (12.7 cm) Diameter Reels, Less Front Rollers

420.00


REEL FRONT ROLLERS2001 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc Rollers

Not compatible if FTC installed.3 In. Diameter Front Rollers Raisethe Minimum Height of Cut.

500.00

2002 (5) 22 In. 2 In. (5cm) Diameter Machined GroovedSolid Front Rollers

In Base Price


2004 (5) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved Front Rollers with Spiral End CapsNot compatible if FTC installed.3 In. Diameter Front Rollers Raisethe Minimum Height of Cut.

850.00


8500 PrecisionCut Fairway MowerEquipment for Base Machine

03 December 2014 U.S.G-10- 87


SUGGESTEDLIST PRICE

USD ($)

REEL FRONT ROLLERS Continued...2005 (5) 22 In. 2 In. (5cm) MT Spiral Roller


580.00

2006 (5) 22 In. 2 In. (5cm) MT Grooved Roller 580.00




2502 (5) 22 In. 2 In. (5cm) MT Spiral RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways.For best results install in front and rear roller location of cutting unit.

905.00

2503 (5) 22 In. 2 In. (5cm) MT Grooved RollerNOT FOR USE ON GREENS. Roller used to help reduce roller overlaps in fairways.For best results install in front and rear roller location of cutting unit.

905.00





380.00


Same Price

4010 Less Counter Weight kit -295.00



No Charge

Cutting Units:9010 (5) Vertical Cutting Units with Front Rollers Less Motors 11,280.00


Must be Ordered to Receive a PrecisionCut Fairway Mower Which Meets CERequirements. Kit Includes Electric Hood Switch, Pictorial Decals and Operator'sManuals in English, French, German, Spanish and Italian.

35.00

9102 European CE Reel Decal Kit for Seven Blade Standard Cutting UnitsMust be Ordered to Receive Decals that Converts (5) Seven Blade Standard Cutting Unitsto Meet CE Mark Requirements.

No Charge


135.00

Miscellaneous:


8500 PrecisionCut Fairway MowerContinued

03 December 2014 U.S.G-10- 88


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9733 (5) Front Grass Catchers with large paddle clip Mounting Hardware for QA5 Cutting

Units, Rear Bail and Catchers w/handles, Wing Latch Kit and grass catcher side plateinserts kit for front center.Note: Cutting unit shield extensions should only be used in dry conditions.

1,592.00

9015 (5) 22 In. Fairway Tender Conditioners (FTC) Shaft and BladesRequires order code 9016.3" roller when used on the QA5 is not compatible with the FTC.

2,385.00

9016 (5) QA5 GTC/FTC Gear DriveRequires order code 9015 (BM22670).3" roller when used on the QA5 is not compatible with the FTC.

6,135.00

9017 (5) 22 In. Rear Roller Power BrushesRequires order code 9018 (BM22527).

690.00

9018 (5) Rear Roller Power Brush DriveRequires order code 9017 (BM22668).

1,885.00

9019 (5) 22 In. Front Rotary Turf BrushCan not be used with FTC/GTC 9015.Requires order code 9016.3" roller when used on the QA5 is not compatible with the FTC.

1,000.00

9020 Hydraulic Down Pressure Kit 904.00


4,524.00



45.00

9400 Canopy 550.00












03 December 2014 U.S.G-10- 89


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Cutting Units:

BM22460 (1) QA5 22 In. Vertical Cutting Unit With FrontRoller Less Motor

2,413.91


2,439.60


2,349.71









147.66




9.63


403.39



153.01




188.31


188.31




03 December 2014 U.S.G-10- 90


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10216 Grass Catcher with large paddle clip (22 Low Profile) 179.76



TCB11128 Hydraulic Down Pressure Kit 967.29


BM24199 QA5 Grass Catcher Side Plate Insert2 Needed for complete machine 2500's.1 Needed for front center location for 7500/8500 Fairway Mowers.1 Needed for 180 & 220 E-Cut Hybrid Walk Greens Mowers.3 Needed for front 8000 E-Cut Hybrid Fairway Mower.

49.21


66.34

BTC10501 Rear Grass Catcher Bail KitRequires 2 for complete machine & rear grass catcher BTC10408.

191.53

BTC10408 Rear Grass Catcher with HandlesRequires 2 for complete machine & rear grass catcher bail system BTC10501.

148.73


295.31



64.20


145.51


64.20



243.96


243.96



368.09



03 December 2014 U.S.G-10- 91


SUGGESTEDLIST PRICE

USD ($)


Grooved Disc Front RollerNot compatible if FTC / GTC installed.3 In. Diameter Front Rollers Raise theMinimum Height of Cut.

350.96


425.86


368.09



03 December 2014 U.S.G-10- 92

Gross Engine HP 43.1 (32.2 kW)Net Engine HP 41.7 (31.1 kW

@ 2600 rpmThree Cylinder TurboDiesel EngineServo Controlled HydrostaticDriveTwo Wheel DrivePower Steering with StraightTrack Steering CylinderDual Disc Brakes100 In. (2.54 m) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresDeluxe Suspension Seat withArmrests and RetractableSeatbelt

White Box Controller withOn-Board DiagnosticsOne-Touch Lift/Lower Reel Lever

Electric Over HydraulicReel LiftRear Cutting UnitAttaching PointFoot Activated Tilt SteeringColumnOn-Board Backlapping withAdjustable Reel Speed ControlFive Hydraulic Quick-Tatch ReelMotorsQuick-Tatch Cutting UnitsAdjustable HydraulicDown Pressure(5) QA7 22 In. (55.9 cm) CuttingUnits (Eight Blade)7 In. (17.8 cm) DiameterReels with Reel to Bedknifewith Notch Adjustments2 In. Diameter Machined GroovedSolid Front Rollers

2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterRemovable Rear Cutting UnitUpstops3 Front Work LightsCommand Arm Operator Controls18 U.S. Gallon Fuel Capacity


SUGGESTEDLIST PRICE

USD ($)



1482TC 8700 PrecisionCut Fairway Mower 63,503.00

REEL CUTTING UNITS1004 (5) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting Units with 6.3 mm bedknife Less


1005 (5) Quick Adjust 7 (QA7) Ten Blade 22 In. E.S.P. Cutting Units with 6.3 mm bedknife,Less Front Rollers, Motors and counter weights

265.00


REEL FRONT ROLLERS2001 (5) 22 In. 3 In. (7.6 cm) Diameter Heavy Duty Grooved Disc In Base Price

2002 (5) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved FrontRollers with Spiral End Caps

350.00


TRACTION DRIVE UNIT3000 2WD Traction Unit In Base Price

3001 Factory Installed 4WD Traction Unit 4,566.00


Needed if NOT installing Rear Roller Power BrushIn Base Price


8700 PrecisionCut Fairway MowerEquipment for Base Machine

03 December 2014 U.S.G-10- 93


SUGGESTEDLIST PRICE

USD ($)

REEL CUTTING UNIT COUNTER WEIGHTS Continued...or GTC/FTC Kits.


380.00


Same Price


-295.00



No Charge

Cutting Units:9010 (5) QA7 Vertical Cutting Units with Front Rollers

Less Motors9,245.00


Must be Ordered to Receive a PrecisionCut Fairway Mower WhichMeets CE Requirements. Kit Includes Electric Hood Switch,Pictorial Decals and Operator's Manuals in English, French,German, Spanish and Italian.

35.00

9102 European CE Reel Decal Kit for E.S.P. Cutting UnitsMust be Ordered to Receive Decals that Converts (5) E.S.P.Cutting Units to Meet CE Mark Requirements.

No Charge


135.00

Miscellaneous:9000 (5) Grass Catchers with large paddle clip Mounting Hardware for QA7 Cutting Units and

Wing Latch1,279.00

9015 (5) QA7 22" Fairway Tender Conditioners Shaft and BladesRequires order code 9016.

2,595.00

9017 (5) QA7 22" Rear Roller Power BrushesRequires order code 9018.

690.00

9018 (5) QA7 Rear Roller Power Brush DriveRequires order code 9017.

1,885.00


4,524.00


715.00


207.00

9400 Canopy 550.00



03 December 2014 U.S.G-10- 94


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9806 (5) 10 Blade QA7 cutting units less front roller 13,605.00





CE Kit:BTC10256 Battery Label Kit

This kit must be ordered to meet battery labeling requirement in Brazil.No Charge

Cutting Units:BM22461 (1) QA7 Vertical Cutting Units with Front Rollers

Less Motors1,978.43

BM22463 (1) Quick Adjust 7 (QA7) Eight Blade 22 In. Cutting UnitsLess Front Rollers and Motors

2,854.76


2,854.76


2,911.47


2,911.47








555.33


147.66



1,312.89


221.49



03 December 2014 U.S.G-10- 95


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM22764 1) Conversion Mounting Kit 2009 Machine to Old Cutting ESP Cutting units



153.01




TCB11126 Canopy 476.16



188.31


188.31


230.06



179.76


179.76





64.20


64.20


145.51





03 December 2014 U.S.G-10- 96


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM19817 (1) 22 In. 3 In. (7.6 cm) Diameter Spiral Grooved

Front Roller With Spiral End Caps425.86



03 December 2014 U.S.G-10- 97

Gross Engine HP 41.6 (31 kW)Three Cylinder TurboTier 4 Diesel EngineB20 CompatibleeHydro Electronic controlledServo Hydrostatic Drive withAutoPedal#Power Steering with Doubleacting steering cylinderInternal Wet Disc Brakes(3) Independent Wheel MotorsGRIP All Wheel DriveWidth On Demand 74 In. (188cm)or 68 In. (173cm) Mowing WidthReach Trimming System withMaximum 15 In. (38cm) Shift

Outside Front Tire(2) 24x12-12 Turf Trac FrontDrive Tires

(1) 24x12-12 Multi Trac RearDrive TireFull Suspension Seatwith Armrest and RetractableSeat BeltTechControl Display with builtin Machine Settings Controls andElectrical DiagnosticsOne-Touch Lift/Lower cuttingunit Joystick controlFoot Activated TiltSteering Column(3) Rotary Deck Hydraulic Motors(3) 27 In. (69cm) FloatingRotary Rear Discharge Decks

10 Gauge Steel Decks with TopMounted Frame and Front DeckBumper

(1) 27 In., 3 In. Diameter

Rear Roller per Deck(2) Front Greasable CasterWheels Per Deck2-Post Roll Over ProtectionStructureCommand Arm Operator Controls12 U.S. Gallon Fuel CapacityJohn Deere Golf Operator Videosand All Products Safety Video

DVD Set


SUGGESTEDLIST PRICE

USD ($)



1431TC 7400A TerrainCut Trim and Surrounds Mower 46,897.00


OPERATOR MANUALS0443 English United States/Canada No Charge


9764 Canopy Kit 550.00

9765 (3) 27 In. Mulch KitsIncludes Deflectors and Baffles. Does not include mulch blades.

417.00

9766 Light Kit 281.00


9768 (3) 27 In. Rear Roller Scraper Kits 234.00


TCB11575 (1) 27 In. Mulch KitDoes Not Include TCU27876 Mulch Blade, See Parts.(3) TCB11575 Must be ordered for complete machine.

148.73

JOHN DEERE TURF & UTILITY PRODUCTSSPECIAL APPLICATION MOWERS

7400A TerrainCut Trim and Surrounds MowerEquipment for Base Machine

17 November 2014 U.S.G-15- 1


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCB11255 (1) 27 In. Rear Roller Scraper Kit 83.46


BTC10393 Joystick Kit 1,067.86

BTC10347 Light Kit 300.67



7400A TerrainCut Trim and Surrounds MowerContinued

17 November 2014 U.S.G-15- 2

Gross Engine HP 55.6 (41.6 kW)Four CylinderTier 4 Turbo Diesel EngineB20 CompatibleeHydro Electronic controlledServo Hydrostatic Drive withAutoPedalGRIP All Wheel DrivePower Steering with Doubleacting steering cylinderInternal Wet Disc Brakes88 In. (226cm) Cutting Width26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresFull Suspension Seat

with Armrest and RetractableSeat BeltTechControl Display with builtin Machine Settings Controls andElectrical DiagnosticsDiagnosticsOne-Touch Lift/Lower cuttingunit Joystick control(5) Rotary Deck Hydraulic Motors(5) 21 In. (53.3cm) FloatingRotary Rear Discharge Decks(1) 21 In., 3 In. Diameter RearRoller per Deck(2) 5 In., 4 In. Diameter FrontRollers Per Deck

2-Post Roll OverProtection Structure3 Front Work LightsCommand Arm with OperatorControls


SUGGESTEDLIST PRICE

USD ($)



1501TC 8800A TerrainCut Rough Mower 68,341.00


OPERATORS MANUAL0443 English United States/Canada No Charge


9764 CanopyThis kit includes canopy, frame and brackets to attach to ROPS.

550.00


755.00


TCB11463 (5) 22 In. Smooth Roller Scrapers1 kit needed per machine.

114.49

TCA19481 21" Deck Less Motor and Motor BaseSee DTAC solution for additional required parts for installation.

See Parts


807.86



8800A TerrainCut Rough MowerEquipment for Base Machine

17 November 2014 U.S.G-15- 3


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCU23674 John Deere Golf Operator Videos and All Products Safety Video DVD Set See Parts

TCB11461 Mulching Kit (1)Does Not Include GC00344 Mulch Blade, See Parts.(5) TCB11461 Must be ordered for complete machine.

77.04

TCU32775 New High Lift bladeBlade does not fit previous models of 8800 decks.

See Parts

TCU32777 New Low Lift Blade - Standard blade on deck shipped from factoryBlade does not fit previous models of 8800 decks.

See Parts

TCU32776 New Medium Lift bladeBlade does not fit previous models of 8800 decks.

See Parts

TCU32778 New Mulch BladeBlade does not fit previous models of 8800 decks.

See Parts


8800A TerrainCut Rough MowerContinued

17 November 2014 U.S.G-15- 4

*Engine HP is Provided by theEngine Manufacturer to beUsed for Comparison PurposesOnly. Actual Operating HP willbe Less. Refer to the enginemanufacturer#s web site foradditional information.Gross Engine HP 37.1 (27.67kW) Net Engine HP 36 (26.85 kW)

@ 2600 RPMThree Cylinder TurboDiesel EngineHydrostatic Drive(3) Independent Wheel MotorsGRIP All Wheel DriveWidth On Demand 74 In. (188cm)or 68 In. (173cm) Mowing WidthReach Trimming System withMaximum 15 In. (38cm) ShiftOutside Front Tire

Power Steering with StraightTrack Steering Cylinder

Dual Disc Brakes(2) 24x12-12 Turf Trac FrontDrive Tires

(1) 24x12-12 Multi Trac RearDrive Tire

Deluxe Suspension Seat withRetractable Seatbelt

White Box Controller withOn-Board Diagnostics

One-Touch Lift/Lower Deck LeverElectric Over Hydraulic DeckLift

Foot Activated Tilt SteeringColumn

(3) Rotary Deck Hydraulic Motors(3) 27 In. (69cm) FloatingRotary Rear Discharge Decks

10 Gauge Steel Decks with TopMounted Frame and Front DeckBumper

(1) 27 In., 3 In. DiameterRear Roller per Deck

(2) Front Greasable CasterWheels Per Deck2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour MeterCommand Arm Operator Controls13 U.S. Gallon Fuel CapacityJohn Deere Golf Operator Videosand All Products Safety VideoDVD Set


SUGGESTEDLIST PRICE

USD ($)



1713TC 7400 TerrainCut Trim and Surrounds Mower 43,214.00

ATTACHMENTS - ORDER AS DESIREDEuropean CE Kit:

9100 European CE Conversion Kit 7400 TerrainCut Trim and Surrounds MowerMust be Ordered to Receive a TerrainCut Trim and SurroundsMower Which Meets CE Requirements. Kit Includes Electric HoodSwitch, Guard, Pictorial Decals and Operator's Manuals in English,French, German, Spanish and Italian.

154.00


107.00


No Charge

Miscellaneous:9001 (3) 27 In. Mulch Kits

Includes Deflectors and Baffles. Does not include mulch blades.417.00

9002 Light Kit 239.00


9023 (3) 27 In. Rear Roller Scraper Kits 234.00

ATTACHMENTS FOR FIELD CONVERSION


7400 TerrainCut Trim and Surrounds MowerEquipment for Base Machine

17 November 2014 U.S.G-15- 5


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...CE Kit:


No Charge

Miscellaneous:TCB11575 (1) 27 In. Mulch Kit

Does Not Include TCU27876 Mulch Blade, See Parts.(3) TCB11575 Must be ordered for complete machine.

148.73

TCB11255 (1) 27 In. Rear Roller Scraper Kit 83.46

TCB11728 Compliance KitThis kit must be ordered to meet the EU country of France shielding regulations.

114.49

TCB11296 Joystick Kit 1,067.86

TCB11462 Light Kit 255.73



7400 TerrainCut Trim and Surrounds MowerContinued

17 November 2014 U.S.G-15- 6

*Engine HP is Provided by theEngine Manufacturer to beUsed for Comparison PurposesOnly. Actual Operating HPwill be Less. Refer to theengine manufacturer#s web sitefor additional information.Gross Engine HP 43.1 (32.2 kW)Net Engine HP 42 (31.1 kW)

@ 2600 rpmThree Cylinder TurboDiesel EngineServo Controlled HydrostaticDriveGrip AWDPower Steering with StraightTrack Steering CylinderDual Disc Brakes88 In. (226cm) Cutting Width

26.5x14-12 Turf Drive Tires20x10-8 Turf Steer TiresDeluxe Suspension Seat withArmrests and RetractableSeatbelt

White Box Controller withOn-Board Diagnostics

One-Touch Lift/Lower Deck LeverElectric Over Hydraulic DeckLift

Foot Activated Tilt SteeringColumn

(5) Rotary Deck HydraulicMotors

(5) 21 In. (53.3cm) FloatingRotary Rear Discharge Decks

(10 Gauge Stamped Steel Decks)(1) 21 In., 3 In. Diameter RearRoller Per Deck

(2) 5 In., 4 In. Diameter FrontRollers Per Deck2-Post Roll Over ProtectionStructure6 LED Warning Light InstrumentCluster with Hour Meter3 Front Work LightsCommand Arm Operator Controls18 U.S. Gallon Fuel Capacity


SUGGESTEDLIST PRICE

USD ($)



1492TC 8800 TerrainCut Rough Mower 61,786.00


9100 European CE Conversion Kit 8800 TerrainCut Rough MowerMust be Ordered to Receive a TerrainCut Rough Mower WhichMeets CE Requirements. Kit Includes Electric Hood Switch,Pictorial Decals and Operator's Manuals in English, French,German, Spanish and Italian.

36.00


No Charge


138.00

Miscellaneous:9400 Canopy 550.00



No Charge



European CE Kit:


8800 TerrainCut Rough MowerEquipment for Base Machine

17 November 2014 U.S.G-15- 7


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCB11727 Compliance Kit


Miscellaneous:TCB11463 (5) 22 In. Smooth Roller Scrapers

1 kit needed per machine.114.49

TCA19481 21" Deck Less Motor and Motor BaseSee DTAC solution for additional required parts for installation.

See Parts

TCB11126 Canopy 476.16


GC00175 High Lift blade - standard with deck shipped from factory See Parts


GX22190 Low Lift Blade See Parts

GC0034 Mulch Blade See Parts

TCB11461 Mulching Kit (1)Does Not Include GC00344 Mulch Blade, See Parts.(5) TCB11461 Must be ordered for complete machine.

77.04


8800 TerrainCut Rough MowerContinued

17 November 2014 U.S.G-15- 8


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION3245C Independent Deck Mower Attachments:

TCB11166 (1) 22 In. Smooth Roller Scraper(5) TCB11166 Kits Must be Ordered for a Complete Machine.

79.19


Current Attachments for Non-Current Special Application Mowers

17 November 2014 U.S.G-15- 9

ENGINE:13 Engine HP (401cc),Single Cylinder, Air-cooled,

4-Cycle GasolineOverhead ValvesFull Pressure LubricationSystemReplaceable Single Element(Dry Type) Air Cleaner

with Remote Intake5.2 Gallon (19.7 L) FuelCapacitySolid State 12V IgnitionELECTRICAL:Electric Start6 Amp, Regulated Alternator340 CCA BatteryTwo 37.5 Watt HalogenHeadlightsTRANSAXLE/TRANSMISSION:Continuously VariableTransmission (CVT)Single-speed Transaxle20 mph (32.2 kph) MaximumForward SpeedRear Traction AssistFront and Rear HydraulicDisk BrakesRear Mechanical Disk HandOperated Park BrakeTwo Rear Drive Wheels1-5/16 In. (33.5mm)Forged Rear AxleSTEERING/SUSPENSION:Rack and Pinion SteeringFront SuspensionIndependent Spring-Over-ShockSingle A-Arm DesignRear Suspension

Triple Rate AdjustableCoil-Over-Shock1 In. (25mm) Front SpindlesFRAME/STYLED PARTS:Arc Welded Uni-Body FrameThermoplastic ElastomerPolyolefin (TPO) Hoodand FendersOPERATOR STATION:High-Back Bucket SeatsWalk-Through PlatformPark Brake Indicator LightHip Restraint Bars(Driver and Passenger)Passenger Grab HandleGlove BoxTwo Cup HoldersFuel GaugeHour Meter12V DC OutletDIMENSIONS:109.6 In. Long x 60 In.Wide x 47.6 In. High(2788 mm x 1524 mm x

1209 mm)1000 Lbs. (454 kg.) TotalPayload Capacity Which

Includes:200 Lbs. (91 kg) Driver,200 Lbs. (91 kg) Passengerand 600 Lbs (272 kg) in

Cargo BoxTowing Capacity: 1000 Lbs.(454 kg)12.00 ft. Turning RadiusGround Clearance (UnderTransaxle): 5.7 In. (145 mm)Ground Clearance (Under FootPlatform): 10.6 In. (270 mm)

CARGO BOX:45 In. Long x 52 In. Widex 12 In. Deep (1143 mm x

1320 mm x 304.8 mm)16.4 Cu.Ft (.46 m) Capacity600 Lbs. (272 kg) BoxCapacityTilting BoxHinged (Bottom) Tailgate,RemovableLoad GuardRemoveable Cargo Box SidePanels (Flat Bed)Hold Down Latch and Prop RodTIRES:Front: 2-22x9.50-10 4 PlyCayman TurfRear: 2-24x12.00-10 4 PlyCayman TurfMiscellaneous:Rear Receiver HitchSAFETY VIDEO TAPE:Safety & Operational Video*Engine HP is Provided by the

Engine Manufacturer to be Usedfor Comparison Purposes Only,

Actual Operating HP will beLess.


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEF.O.B. Janesville, Wisconsin

563MM Gator TX TurfBase Machine Suggested List Price Does Not Include $300 USD Destination Charge.

9,119.00




WHEELS WITH TIRES (FOUR)1015 Cayman Turf Tires In Base Price

JOHN DEERE GOLF PRODUCTSSPECIAL APPLICATION VEHICLES AND EQUIPMENT

Gator TX TurfEquipment for Base Machine

17 November 2014 U.S.G-20- 1


SUGGESTEDLIST PRICE

USD ($)

WHEELS WITH TIRES (FOUR) Continued...

DRIVER SEAT2016 Non Adjustable Seat In Base Price

2017 Adjustable Seat 88.00

DELUXE CARGO BOX3001 Deluxe Cargo Box with Paint & Reflectors In Base Price

3004 Deluxe Cargo Box with Reflectors & Spray-On Liner 270.00

3006 Deluxe Cargo Box with Brake & Tail Light, Spray-On Liner & Tail Light Protector 510.00

CARGO BOX POWER LIFT3100 Less Power Lift

Latch and Prop Rod Included.In Base Price

3101 Cargo Box Power Lift 749.00

FRONT PROTECTION PACKAGE4054 Front Protection Package

Package Consists of: Front Bumper/Brush Guard, Front Fender Guard and RubberFloormats

594.00

4099 Less Front Protection Package In Base Price

REAR PROTECTION PACKAGE4150 Rear Protection Package

Package Consists of: Rear Bumper, Bedmat Kit, Cargo Box Fender Guard559.00

4199 Less Rear Protection Package In Base Price

ATTACHMENTS FOR FIELD CONVERSIONCabs/Roofs/Windshields:

BM22600 Deluxe Glass CabIncludes Front Windshield (Excluding Wiper), GlassDoors and Glass Rear Window.

Remote Cargo Box Release Kit is required if vehicleis not equipped with Cargo Box Power Lift.

Heavy Duty Front Suspension Kit is recommended withCab installation (Already standard on TE).

4,086.33

BM22138 Electrical Kit - Deluxe Glass CabKit Includes Wiring Harness, Overhead Consoleand Roof Headliner. Required for Deluxe Glass Cab electrical accessories.

228.99

BM21645 Exterior Mirrors (2) KitRequires Deluxe Glass Cab.

180.83

BM23578 Forced-Air Heater Kit 2,349.71


Gator TX TurfContinued

17 November 2014 U.S.G-20- 2


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM21656 Interior Light Kit - Deluxe Cab 60.99

LP45544 SunshadeAvailable through Order Zone.

In Catalog

BM21646 Visor (1) Kit - Deluxe cab 73.83

BM21466 Windscreen 293.19

BM21648 Windshield Washer KitRequires Electrical Kit.

180.83

BM21462 Windshield Wiper KitRequires Electrical Kit.

310.30

Cargo Box Options / Storage:BM23849 5 Gallon Pail Holder 39.59

BM22772 Cargo Box Bed Mat 119.84

BM22769 Cargo Box Divider 200.09

BM23734 Cargo Box Power Lift 801.43

BM24901 Cargo Box Side Extension Kit 491.13

BM23456 Front Hood RackRequires Front Bumper / Brush Guard for mounting. Not compatible with Mauser Cab.

253.59

LP30320 Fuel PackAvailable through Order Zone.

In Catalog

LP19886 Gator Tool BoxContact Dealer for pricing.

In Catalog

LP46485 Ratcheting Rhino GripAvailable through Order Zone.

In Catalog

LP45543 Refreshment CenterAvailable through Order Zone.

In Catalog

BM24804 Remote Cargo Box Release KitRequired if equipped with Deluxe Glass Cab and manual cargo box release (no powerlift).

115.56

LP25929 Rhino Grip XL - Double In Catalog

LP25928 Rhino Grip XL - Single In Catalog

LP19882 Saw Press BracketAvailable through Order Zone.

In Catalog

BM22776 Side Storage Box 219.36

BM22775 Side Tool Rack 318.86



17 November 2014 U.S.G-20- 3


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Carts / Hitches:

LPPCT10LXATV 10AT CartAvailable through Order Zone.

In Catalog

LPPCT17ATJD 17AT CartAvailable through Order Zone.

In Catalog

LPUT21JD 21 Steel Utility CartAvailable through Order Zone.

In Catalog

PM05101 Ball Mount - 1.875 in. (48mm) See Parts

PM05201 Ball Mount - 2 in. (51mm) See Parts

BM23989 Drawbar, 1.25 In. (38mm) 37.46

Custom & High Performance:BM20414 Heavy-Duty Suspension Kit

Recommended when using a deluxe cab or front mounted blades. Heavy-Duty Suspensionis standard on Gator TE.

173.34

BM22543 Rough Terrain KitThrottle stabilizer.

97.37

Engine:BM22889 Fly Wheel Cover 64.20

AM108146 Spark Arrester Screen for Muffler See Parts

Hunting / Camo:LP19884 Cargo Box Gun Mount - Black

Double gun boot mount. Includes (2) Gun Boot 6.0 Transports.In Catalog

LP19879 Deluxe Cargo Box Cover- Camo In Catalog

LP19877 Gator Gear Organizer (Camo) In Catalog

LP93103 Vehicle Cover, Cab / ROPS - Camo In Catalog

Lights / Signals:BM22405 Beacon Light 384.13

BM21649 Beacon Light Kit - Deluxe Cab 384.13

BM24591 Brake / Tail Light Kit 162.64

BM25071 Deluxe Light KitKit includes backup lights, four-way flashers, turn signals (front and rear), brake lights,taillights, front position lights. Front turn signals also act as rear view mirrors.

395.90

BM21651 Front Light Kit - Deluxe CabRequires Electrical Kit.

307.09

BM23193 Horn Kit 97.37

BM21652 Rear Light Kit - Deluxe CabRequires Electrical Kit.

226.84



17 November 2014 U.S.G-20- 4


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Protection:

BM22811 Cargo Box FenderGuardRequires Heavy Duty Rear Bumper.

195.81

BM25000 Floor Mat 80.26

BM23458 Front BumperIncludes Front Receiver Hitch.

200.09

BM23459 Front Bumper/Brush GuardIncludes front receiver hitch.

347.76

BM23457 Front Fender GuardRequires Front Bumper or Front Bumper/Brushguard.

165.86

LP93547 Gator CoverNot compatible with Deluxe Cab.Available through Order Zone.

In Catalog

BM22767 Heavy Duty Rear Bumper 242.89

LP92634 Large Deluxe Seat Cover - YellowAvailable through Order Zone.

In Catalog

LP92334 Large Seat Cover - YellowAvailable through Order Zone.

In Catalog

LP92333 Seat Cover - CamoAvailable through Order Zone.

In Catalog

BM22773 Tail Light Protectors 94.16

LP93107 Vehicle Cover, Cab / ROPS - BlackFits all Models Equipped with OPS and Deluxe Cab Structure.

In Catalog

Seats / Wheels / Tires:BM23799 Parts For Adjustable Driver's Seat 94.16

Spanish North American Kit:M153216 Spanish Operator's Manual See Parts

Sprayers / Pressure Washers:LP33597 25 Gallon Bed Sprayer In Catalog

LP20852 45 Gallon Bed Sprayer In Catalog

LP22908 45 Gallon High Performance Sprayer In Catalog

LP20485 45 Gallon Tow-Behind Sprayer In Catalog

LPGP2700GH GatorPal High Pressure Washer (2700 psi, Honda engine)Contact Dealer for pricing.

In Catalog

LPGP2700GS GatorPal High Pressure Washer (2700 psi, Subaru engine)Contact Dealer for pricing.

In Catalog



17 November 2014 U.S.G-20- 5


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...LP22885 HP 150 in. Precision Boom

Compatible with all High Performance Sprayers.Available through Order Zone.

In Catalog

LP39963 HP 45 Gallon Sprayer - Tow Behind In Catalog

LP22884 HP Boomless Nozzles In Catalog

LP22911 HP Standard Gator Boom In Catalog

Winch:BM24442 Warn® Winch (3000 Lb.)

Requires Front Bumper or Front Bumper/Brush Guard for Front Mount.Requires Rear Receiver Hitch for Rear Mount.Requires Rear Multi-Mount Harness (AM137110) for Rear Mount.VGA10459 (battery wiring harness) required for 6X4 vehicles (TH Gas, TH Diesel,M-Gator A1).

879.54

BM21392 Winch Accessories Kit 132.69



17 November 2014 U.S.G-20- 6

11.0 HP (8.2 kW) at 3600 rpmEnginer Manufacturer Gross PowerTested in Accordance with SAEJ1995351 ccThe engine hp and torqueinformationare provided by the enginemanufacturer to be usedfor comparison purposes only.Actual operating hp and torquewill be less.Refer to engine manufacturer'swebsite for additionalinformation.Air-cooled, 4-Cycle Gas EngineFull Pressure LubricationOil Filter

Electric StartHeavy Duty Air CleanerEnclosed TransaxleDifferential LockVariable DriveRear HitchFoot Throttle ControlParking BrakeAutomotive Steering WheelRear Utility Storage Basket(1) Front Tire,22.5X10-8 In.2 PR Hi-Flotation

(2) Rear Tires,25X12.00-9 In.2 PR Hi-Flotation

High Back Seat3.6 Gallon (13.6 L) Fuel

Capacity72 In. Rear MountedProng-Blade RakeHeavy-Duty Rear ElectricActuated Lift2 Pedal Forward/ReverseFoot ControlMeets CARB Standards


SUGGESTEDLIST PRICE

USD ($)



4309M 1200A Bunker and Field Rake 13,882.00

DESTINATION0202 US/Canada In Base Price

0230 Australia/New Zealand Same Price

0179 Europe 87.00


0250 All Other Countries Same Price

RAKE ATTACHMENT FRAME1001 Rear Frame In Base Price

1010 Less Rear Frame -207.00

REAR MOUNTED ATTACHMENTS2000 Bunker Rake (Serrated Blades)

Requires Rear Frame.In Base Price

2001 Field Rake (Smooth Blades)Requires Rear Frame.

21.00

2002 Rear Mounted 60 In. Field FinisherRequires Rear Frame.

-17.00

2003 Spiker 2,949.00


1200A Bunker and Field RakeEquipment for Base Machine

17 November 2014 U.S.G-20- 7


SUGGESTEDLIST PRICE

USD ($)

REAR MOUNTED ATTACHMENTS Continued...Requires Less Rear Frame. Region II (Europe) RequiresEuropean CE Conversion Kit (Code 9102).

2010 Less Bunker Rake Attachment -444.00

WHEELS WITH TIRES (THREE)3000 (3) Knobby Hi-Flotation Tires and Wheels In Base Price

3001 (3) Sports Turf Tires and Wheels Same Price

3010 Less Tires and Wheels -546.00


9102 European CE Conversion Kit, SpikerMust be Ordered to Receive a Spiker Which Meets CERequirements. Kit Includes Pictorial Decals and Operator'sManuals in English, French, German, Spanish and Italian.

No Charge

Miscellaneous:9010 Mid-Mount Cultivator Shoes/Blades

Requires BM18536 Mid-Mount Base.204.00

9011 Mid-Mount Base 491.00

9012 Wide Scarifier (Interval) TinesRequires BM18536, Mid-Mount Base.

420.00

9013 Narrow Scarifier (Interval) TinesRequires BM18536, Mid-Mount Base.

593.00

9020 40 In. Front Blade 581.00

9030 60 In. Front Aluminum BladeRequires BM18537, Front Blade.

232.00

9040 Mid-Mount 64.5 In. Scraper BladeRequires BM18536, Mid-Mount Base. Also Requires BM18252 or BM18253, Tines.

185.00



No Charge

Miscellaneous:BM18537 40 In. Front Blade 621.67

BE23419 60 In. Front Aluminum BladeRequires BM18537, Front Blade.

248.24

BM18248 Bunker Rake (Serrated Blades) 475.09

TCU17594 Bunker Rake Blade See Parts


1200A Bunker and Field RakeContinued

17 November 2014 U.S.G-20- 8


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...AET10262 Cultivator Blade See Parts

BM18249 Field Rake (Smooth Blades) 497.56

ET15235 Field Rake Blade See Parts

TCB11024 Light KitIncludes Wiring Harness, Two Front and One Rear Light.

See Parts

BTC10094 Light KitIncludes Wiring Harness, two Front and on Rear Light.

235.40

BE23421 Mid-Mount 64.5 In. Scraper BladeRequires BM18536, Mid-Mount Base. Also Requires BM18252 or BM18253, Tines.

197.96

BM18536 Mid-Mount Base 525.37

BM18251 Mid-Mount Cultivator Shoes/BladesRequires BM18536 Mid-Mount Base.

218.29

BM18253 Narrow Scarifier (Interval) TinesRequires BM18536, Mid-Mount Base.

634.51

BM18247 Rear Frame 221.49

BE23422 Rear Mounted 60 In. Field FinisherRequires Rear Frame.

456.89

AET10644 Scarifier Tine, Narrow-IntervalRequires BM18536, Mid-Mount Base.

See Parts

AET10702 Scarifier Tine, Wide-IntervalRequires BM18536, Mid-Mount Base.

See Parts

TCB11583 Spiker 3,630.51

TCB10865 Tires and Wheels, (3) Knobby Hi-Floatation 584.21

TCB11659 Tires and Wheels, (3) Sports Turf(1) 22.5x10-8 Front, (2) 25x12-9 Rear.

584.21

BM18252 Wide Scarifier (Interval) TinesRequires BM18536, Mid-Mount Base.

449.40


1200A Bunker and Field RakeContinued

17 November 2014 U.S.G-20- 9

16 (12 kW) Gross HPVanguard Air Cooled

Gas Two-Cylinder EngineFull Pressure LubricationOil FilterElectric StartHeavy-Duty Air Cleaner3 Wheel Hydrostatic DrivePowertrainVariable DriveRear HitchHand Throttle ControlParking Brake

Automotive Steering Wheel12.9 qt (12.2 L) HydraulicCapacity(3) 22x13.00x8 LPTubeless TiresHigh Back Seat3.9 Gallon (14.8 L) FuelCapacity72 In. Rear MountedProng-Blade RakeHydraulic Lift for Mid andRear Mount Attachments2 Pedal Forward/Reverse

Foot ControlMeets CARB Standards


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEF.O.B. Davenport, Iowa.

1055TC 1200 Hydro Rake 17,454.00





REAR MOUNTED ATTACHMENTS6426 72 In. Rear Prong-Blade Rake In Base Price

6445 Less Rear Attachment -802.00


9700 Hydro Rake 40 In. Front Blade 1,585.00

9701 Hydro Rake Scarifier 885.00

9702 Light KitIncludes Wiring Harness, Two Front and One Rear Light.

220.00

9703 Mid Mount Cultivator Shoes/Blades 709.00


TCB10889 Hydro Rake 40 In. Front Blade 1,695.96


1200 Hydro RakeEquipment for Base Machine

17 November 2014 U.S.G-20- 10


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCB10891 Hydro Rake 72 In. Rear Mounted Prong Blade Rake 858.14

TCB10890 Hydro Rake Scarifier 946.96

BTC10094 Light KitIncludes Wiring Harness, two Front and on Rear Light.

235.40

TCB10939 Mid Mount Cultivator Shoes/Blades 758.63


1200 Hydro RakeContinued

17 November 2014 U.S.G-20- 11

34.0 HP (25.4 kW) at 3600 rpmEngine Manufacturer GrossPower per SAE J1349Tested in accordance withSAE J1995 970 ccThe engine hp and torqueinformation are provided bythe engine manufacturer to beused for comparison purposesonly. Actual operating hpand torque will be less.Refer to the enginemanufacturer's website foradditional information.Four Cylinder, Liquid-cooledGas EngineElectronic Fuel InjectionOverhead ValvesFull Pressure LubricationReplaceable Dual Dry-TypeElement Air Cleaner with

Remote Intake

8.1 Gal. (30.7L) Fuel CapacityTransistor Controlled IgnitionElectric Start55 Amp, Regulated Alternator500 CCA BatteryHalogen Headlights5-Speed Syncromesh TransmissionEnclosed Transaxle4 Wheel Hydraulic Disk BrakesHand Operated Parking Brake4th & 5th Gear LockoutHydraulic SteeringLeaf Spring and Shock AbsorberSuspensionFront tires, Wide Smooth22x9.50-12 (4PR)Rear Tires, Wide Multi Trac26x14-12 (4PR)HourmeterTachometerDigital SpeedometerPower Take-Off Light

Engine Coolant TemperatureGauge

Voltage Indicator Light4WD Indicator LightOil Pressure LightHornTwo Professional High Back,Tilt Forward SeatsTwo-Post ROPSFlip-up SeatsSeat BeltsGlove BoxCup Holders


SUGGESTEDLIST PRICE

USD ($)



1404TC MY15 ProGator 2020A (Gas) 25,441.00






1191 4WD Traction Unit 5,618.00

FRONT TIRES and WHEELS1139 Standard Front Tires 23x10.5-12 (4 PR) Same Price

1140 Wide Smooth Front (2) Tires and (2) Wheels, 22x9.50-12 (4 PR)Traction will be limited with smooth tires.

In Base Price

REAR TIRES1159 Standard Rear Tires 26x12-12 (4 PR) Same Price


MY15 ProGator 2020A (Gas)Equipment for Base Machine

17 November 2014 U.S.G-20- 12


SUGGESTEDLIST PRICE

USD ($)

REAR TIRES Continued...

1160 Smooth Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR)Traction will be limited with smooth tires.

Same Price

1161 Fairway Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR) Same Price

1162 Wide Rear Multi-Trac (2) Tires and (2) Wheels, 26 x 14-12 (4 PR)Set of (2) wheels and (2) tires. Required for Use on HD300 Sprayer.

In Base Price

AUXILIARY HYDRAULICS2200 Factory Installed Auxiliary Hydraulics In Base Price

2201 Less Auxiliary Hydraulics -1,398.00


9771 Tailgate Release Kit 246.00

9772 Turn Signal KitIncludes Four Lamp Assemblies and Wire Harness.

219.00

9773 Electronic Multi-Mode Throttle/Governor Control KitRecommended for Use with TC125 and HD200 /300 Sprayers with manual spraycontrollers. Compatible only with gas ProGators.

316.00

9775 Armrest Kit (One Set) 79.00

9776 Cargo Box 1,899.00

9777 Cargo Box Bedliner 391.00

9778 Quick Connect KitIncludes (2) VGB10058 Quick Connect Kits.

138.00

ATTACHMENTS FOR FIELD CONVERSIONHydraulics:

TCB11078 Auxiliary Hydraulic KitFor MY2011 and prior 2020A and 2030A ProGators. Refer to DTAC Solution 80643 forInstallation on 2020 and 2030 ProGators.

941.60

BTC10542 Auxiliary Hydraulic KitFor MY2015 and newer machines for field conversion.

923.41

Miscellaneous:BTC10091 4-Post ROPS Conversion Kit (Green)

Required for Use on HD300 Sprayer. Retrofitable to MY11 and earlier ProGators.1,693.81

BM20003 Armrest Kit (One Set) 82.39

BTC10262 Cargo Box 2,031.93

VGB10040 Cargo Box Bedliner 409.81


MY15 ProGator 2020A (Gas)Continued

17 November 2014 U.S.G-20- 13


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...VGB10027 Cushman Core Harvester Adapter Kit

Requires Auxiliary Hydraulics and Cargo Box. Recommend BM19955 Throttle GovernorControl Kit. Early Model Cushman Core Harvesters (6"" x 16"" Tire on a 6"" Wheel)Require Additional Spacer VG10687 From Service Parts.

Requires BTC10542 Auxiliary Hydraulic Kit and BM20006 Cargo Box. RecommendBM19955 Diesel Throttle Kit or BTC10261 Gas Throttle Kit Governor Control Kit. EarlyModel Cushman Core Harvesters (6" x 16" Tire on a 6" Wheel) Require Additional SpacerVG10687 From Service Parts.

Requires Auxiliary Hydraulics and Cargo Box. Recommend BM19955 Diesel Throttle Kitor BTC10261 Gas Throttle Kit Throttle Governor Control Kit. Early Model CushmanCore Harvesters (6"" x 16"" Tire on a 6"" Wheel) Require Additional Spacer VG10687From Service Parts.

Requires BTC10542 Auxiliary Hydraulic Kit and BTC10262 Cargo Box. RecommendBM19955 Diesel Throttle Kit or BTC10261 Gas Throttle Kit Throttle Governor ControlKit. Early Model Cushman Core Harvesters (6" x 16" Tire on a 6" Wheel) RequireAdditional Spacer VG10687 From Service Parts.

899.87

BTC10261 Electronic Multi-Mode Throttle/Governor Control KitRecommended for Use with TC125 and HD200/300 Sprayers with manual spraycontrollers. Compatible only with MY 2012 and beyond gas ProGators.

338.11

BTC10097 Fairway Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR)Required for Use on HD300 Sprayer.

622.74

BM20433 Heavy Duty Front Spring KitRequired for Use on HD300 Sprayer.

310.30

TCB10910 Heavy Duty Rear Spring KitRequired for Use on HD300 Sprayer.

310.30


VGB10047 Mud Flaps Kit 50.29

VGB10050 Multi-Purpose PlatformRequired For Use with Vicon Mounting Kit (VGB10051).

1,095.69

VGB10058 Quick Connect Kit 73.83

BM20502 Rear Receiver Hitch Kit - HDUVNo Ball Mount Comes with the Hitch.

265.36

BTC10095 Smooth Front (2) Wheels and (2)Tires, 22x9.50-12 (4 PR)Set of (2) wheels and (2) tires.

502.90

BTC10096 Smooth Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR)Traction will be limited with smooth tires. Required for Use on HD300 Sprayer.

622.74

BM19954 Tailgate Release Kit 256.80

BM19955 Throttle/Governor Control KitRecommended for Use with TC125 and HD200 /300 Sprayers with manual spraycontrollers. Compatible with MY 2011 and earlier gas ProGators and all model years ofDiesel ProGators.

416.23

BTC10507 Turn Signal KitIncludes Four Lamp Assemblies and Wire Harness.

230.06



17 November 2014 U.S.G-20- 14


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...VGB10051 Vicon Spreader Mounting Kit

Requires Auxiliary Hydraulic Kit (BTC10542) and Multi-Purpose Platform (VGB10050).1,592.16

BM20705 Wide Rear Multi-Trac (2) Tires and (2) Wheels, 26 x 14-12 (4 PR)Required for Use on HD300 Sprayer.

622.74

BM19776 Work Light KitIncludes Two Front and One Rear Work Light.

272.86



17 November 2014 U.S.G-20- 15

23.6 (17.6 kW) Net HP* (1115cc), ThreeCylinder Yanmar Diesel,

4 Cycle, Liquid CooledOverhead ValvesFull Pressure LubricationReplaceable Dual Dry-TypeElement Air Cleaner with

Remote Intake8 Gal. (30.3L) Fuel CapacityTransistor Controlled IgnitionElectric Start55 Amp, Regulated Alternator500 CCA BatteryHalogen Headlights5-Speed Syncromesh TransmissionEnclosed Transaxle4 Wheel Hydraulic Disk BrakesHand Operated Parking Brake4th & 5th Gear Lockout

Hydraulic SteeringLeaf Spring and Shock AbsorberSuspensionFront tires, Wide Smooth22x9.50-12 (4PR)Rear Tires, Wide Multi Trac26x14-12 (4PR)HourmeterTachometerDigital SpeedometerPower Take-Off LightEngine Coolant TemperatureGauge

Voltage Indicator Light4WD Indicator LightOil Pressure LightHornTwo Professional High Back,Tilt Forward SeatsTwo-Post ROPS

Flip-up SeatsSeat BeltsGlove BoxCup Holders*Engine HP is Provided by the

Engine Manufacturer to be Usedfor Comparison Purposes Only,Actual Operating HP will be

Less


SUGGESTEDLIST PRICE

USD ($)



1414TC MY15 ProGator 2030A (Diesel) 27,441.00


001B Europe 71.00




Operator Manuals0443 US/Canada In Base Price



FRONT TIRES and WHEELS1139 Standard Front Tires 23x10.5-12 (4 PR) Same Price


MY15 ProGator 2030A (Diesel)Equipment for Base Machine

17 November 2014 U.S.G-20- 16


SUGGESTEDLIST PRICE

USD ($)

FRONT TIRES and WHEELS Continued...1140 Wide Smooth Front (2) Tires and (2) Wheels, 22x9.50-12 (4 PR)

Traction will be limited with smooth tires.In Base Price

REAR TIRES1159 Standard Rear Tires 26x12-12 (4 PR) Same Price

1160 Smooth Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR)Traction will be limited with smooth tires.

Same Price

1161 Fairway Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR) Same Price

1162 Wide Rear Multi-Trac (2) Tires and (2) Wheels, 26 x 14-12 (4 PR)Set of (2) wheels and (2) tires. Required for Use on HD300 Sprayer.

In Base Price





9772 Turn Signal KitIncludes Four Lamp Assemblies and Wire Harness.

219.00


9776 Cargo Box 1,899.00



138.00

9774 Throttle/Governor Control KitFor use with sprayers, topdressers, spreaders, and TC125. For Diesel units only.

389.00



941.60

BTC10542 Auxiliary Hydraulic KitFor MY2015 and newer machines for field conversion.

923.41




MY15 ProGator 2030A (Diesel)Continued

17 November 2014 U.S.G-20- 17


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM20003 Armrest Kit (One Set) 82.39



VGB10027 Cushman Core Harvester Adapter KitRequires Auxiliary Hydraulics and Cargo Box. Recommend BM19955 Throttle GovernorControl Kit. Early Model Cushman Core Harvesters (6"" x 16"" Tire on a 6"" Wheel)Require Additional Spacer VG10687 From Service Parts.

Requires BTC10542 Auxiliary Hydraulic Kit and BM20006 Cargo Box. RecommendBM19955 Diesel Throttle Kit or BTC10261 Gas Throttle Kit Governor Control Kit. EarlyModel Cushman Core Harvesters (6" x 16" Tire on a 6" Wheel) Require Additional SpacerVG10687 From Service Parts.

Requires Auxiliary Hydraulics and Cargo Box. Recommend BM19955 Diesel Throttle Kitor BTC10261 Gas Throttle Kit Throttle Governor Control Kit. Early Model CushmanCore Harvesters (6"" x 16"" Tire on a 6"" Wheel) Require Additional Spacer VG10687From Service Parts.

Requires BTC10542 Auxiliary Hydraulic Kit and BTC10262 Cargo Box. RecommendBM19955 Diesel Throttle Kit or BTC10261 Gas Throttle Kit Throttle Governor ControlKit. Early Model Cushman Core Harvesters (6" x 16" Tire on a 6" Wheel) RequireAdditional Spacer VG10687 From Service Parts.

899.87


622.74


310.30


310.30




1,095.69



265.36


502.90


622.74


BM19955 Throttle/Governor Control KitFor use with sprayers, topdressers, spreaders, and TC125. For Diesel units only.

416.23



17 November 2014 U.S.G-20- 18


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10507 Turn Signal Kit

Includes Four Lamp Assemblies and Wire Harness.230.06

VGB10051 Vicon Spreader Mounting KitRequires Auxiliary Hydraulic Kit (BTC10542) and Multi-Purpose Platform (VGB10050).

1,592.16


622.74


272.86



17 November 2014 U.S.G-20- 19

22.1 (16.5 kW) Net HP* (1115cc), ThreeCylinder Yanmar Diesel,

4 Cycle, Liquid CooledOverhead ValvesFull Pressure LubricationReplaceable Dual Dry-TypeElement Air Cleaner with

Remote Intake8 Gal. (30.3L) Fuel CapacityTransistor Controlled IgnitionElectric Start55 Amp, Regulated Alternator500 CCA BatteryHalogen Headlights5-Speed Syncromesh TransmissionEnclosed Transaxle4 Wheel Hydraulic Disk Brakes

Hand Operated Parking Brake4th & 5th Gear LockoutHydraulic SteeringLeaf Spring and Shock AbsorberSuspensionHourmeterTachometerDigital SpeedometerPower Take-Off LightEngine Coolant Temperature

GaugeVoltage Indicator Light4WD Indicator LightOil Pressure LightHornTwo Professional High Back,Tilt Forward SeatsTwo-Post ROPS

Seat BeltsGlove BoxCup Holders*Engine HP is Provided by the

Engine Manufacturer to be Usedfor Comparison Purposes Only,Actual Operating HP will beLess


SUGGESTEDLIST PRICE

USD ($)



1413TC ProGator 2030A (Diesel) 26,644.00



0179 Europe 71.00










ProGator 2030A (Diesel)Equipment for Base Machine

17 November 2014 U.S.G-20- 20


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED Continued...9020 Turn Signal Kit

Includes Four Lamp Assemblies and Wire Harness.219.00

9035 Throttle/Governor Control KitFor use with sprayers, topdressers, spreaders, and TC125. For Diesel units only.

389.00


9051 Cargo Box 1,899.00



138.00

9085 Smooth Front Wheels and Tires, 22x9.50-12 (4 PR)Set of (2) wheels and (2) tires. Traction will be limited in some conditions.

470.00

9090 Smooth Rear Wheels and Tires, 26x14-12 (4 PR)Set of (2) wheels and (2) tires. Traction will be limited in some conditions.

582.00

9095 Fairway Rear Wheels and Tires, 26x14-12 (4 PR)Set of (2) wheels and (2) tires.

582.00



941.60

TCB11681 Auxiliary Hydraulic KitFor MY2012 and beyond. 2020A and 2030A ProGators less factory installed auxiliaryhydraulics.

923.41



BM20003 Armrest Kit (One Set) 82.39



VGB10027 Cushman Core Harvester Adapter KitRequires Auxiliary Hydraulics and Cargo Box. Recommend BM19955 Throttle GovernorControl Kit. Early Model Cushman Core Harvesters (6"" x 16"" Tireon a 6"" Wheel) Require Additional Spacer VG10687 From Service Parts.

899.87


622.74


310.30


ProGator 2030A (Diesel)Continued

17 November 2014 U.S.G-20- 21


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCB10910 Heavy Duty Rear Spring Kit

Required for Use on HD300 Sprayer.310.30




1,095.69



265.36


502.90


622.74


BM19955 Throttle/Governor Control KitFor use with sprayers, topdressers, spreaders, and TC125. For Diesel units only.

416.23

BTC10507 Turn Signal KitIncludes Four Lamp Assemblies and Wire Harness.

230.06

VGB10051 Vicon Spreader Mounting KitRequires Auxiliary Hydraulic Kit (TCB11078) and Multi-Purpose Platform (VGB10050).

1,592.16


622.74


272.86


ProGator 2030A (Diesel)Continued

17 November 2014 U.S.G-20- 22

200 Gallon Sprayer TankElectric Boom Control ValvesElectric Flow Regulating ValveSpray Pump with Hydraulic DriveDigital Manual Rate Controllerfor Centrifugal or DiaphragmPumpNon-Siphoning Top FillRugged Booms with StandardElectro-Hydraulic Lift

Personal Wash TankJet AgitationHeavy Duty FrameSelf-Cleaning Line StrainerTriple Nozzle BodiesQuick Remove Spray ControlsBi-Directional Boom BreakawayNo-tool Sprayer Removal andAttachmentStandard Throttling Valves


SUGGESTEDLIST PRICE

USD ($)



3765M HD200 SelectSpray(For ProGators 2020A, 2020 and 2030A, 2030)Requires Auxiliary Hydraulics.BM19955 Throttle/Governor Control Kit is Recommended for sprayers equipped withmanual spray controller.

11,252.00



0179 Europe 361.00



PUMP1002 Diaphragm Pump 2,286.00

1003 Cast Iron Centrifugal Pump In Base Price

1004 Stainless Steel Centrifugal Pump 531.00

SPRAY CONTROLS2002 Automatic Rate Controller for Centrifugal or Diaphragm Pump 1,008.00

2003 Digital Manual Rate Controller for Centrifugal or Diaphragm Pump In Base Price

SPRAY BOOM3000 18 Ft. Spray Boom w/ Electro-Hydraulic Lift In Base Price


HD200 SelectSpray(For ProGators 2020A, 2020 and 2030A, 2030)

Equipment for Base Machine

17 November 2014 U.S.G-20- 23


SUGGESTEDLIST PRICE

USD ($)

SPRAY BOOM Continued...3001 Multi-Size Boom, 15 ft. and 21 ft. (4.6M and 6.4M) w/ Electro-Hydraulic Lift 400.00

3010 Less Spray Boom -3,713.00


9000 Extended Range Flat-Fan Style Nozzle PackageContains (13) Nozzle Tips, Caps, and Screens.Rated Pressure .4 GPM at 40 psi.

170.00

9005 Flood Style Nozzle PackageContains (13) Nozzle Tips, Caps, and Screens.Rated Pressure .4 GPM at 40 psi.

191.00

9010 Low Drift Nozzle KitContains (13) Nozzle Tips and Caps.

151.00

9020 Rinse Deflector Kit 222.00

9030 Electric Foam Marker 1,548.00

9040 Sprayer Storage Stand 891.00

9045 CleanLoad Chemical Eductor 2,114.00

9050 Manual Reel and 200 Ft. of 1/2 In. Hose, Less SpraygunCannot be Used with Code 9055.

1,193.00

9055 Electric Reel and 200 Ft. of 1/2 In. Hose, Less SpraygunCannot be Used with Code 9050.

1,919.00

9060 Spraygun 182.00

9070 Ground Plane WheelFor Use with Code 3001 (Multi-Size Boom).

589.00

9075 20 Gallon Rinse Tank 678.00

9810 Smooth Front (2) Wheels and (2) Tires, 23x10.5-12 (4 PR)Set of (2) wheels and (2) tires.

470.00

9095 Wide Rear Multi-Trac (2) Tires and (2) Wheels, 26 x 14-12 (4 PR)Required for Use on HD300 Sprayer.

582.00

9799 Smooth Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR)Traction will be limited with smooth tires. Required for Use on HD300 Sprayer.

582.00

9800 Fairway Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR)Required for Use on HD300 Sprayer.

582.00




Continued

17 November 2014 U.S.G-20- 24


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Hydraulics:

TCB11078 Auxiliary Hydraulic KitFor model years 2011 and before. For 2020A and 2030A ProGators. Refer to DTACSolution 80643 for Installation on 2020 and 2030 ProGators.

941.60

TCB11681 Auxiliary Hydraulic KitFor model year 2012 and beyond 2020A and 2030A ProGators less factory installedauxiliary hydraulics.

923.41

Miscellaneous:TCB10933 20 Gallon Rinse Tank 725.46

BTC10091 4-Post ROPS Conversion Kit (Green)Required for Use on HD300 Sprayer. Retrofitable to MY11 and earlier ProGators.

1,693.81

BTC10062 CleanLoad Chemical Eductor 2,261.99

BTC10061 Electric Foam Marker 1,656.36

BM19261 Electric Reel and 200 Ft. of 1/2 In. Hose, Less Spraygun 2,053.33

BTC10261 Electronic Multi-Mode Throttle/Governor Control KitRecommended for Use with TC125 and HD200 /300 Sprayers with manual spraycontrollers. Compatible only with MY 2012 and up gas ProGators.

338.11

BM19256 Extended Range Flat-Fan Style Nozzle Package 181.90


622.74

BM19335 Flood Style Nozzle Package 204.37

BM19257 Ground Plane Wheel 630.23


310.30


310.30

VGB10129 Low Drift Nozzle Kit 161.57

BM19260 Manual Reel and 200 Ft. of 1/2 In. Hose, Less Spraygun 1,276.51

BM19979 Rinse Deflector Kit 237.54


502.90


622.74

BTC10063 Sprayer Storage Stand 953.37

BM19876 Spraygun 194.74



Continued

17 November 2014 U.S.G-20- 25


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM19955 Throttle/Governor Control Kit

For Diesel units only. Not compatible with Gas 2020A ProGators.416.23


622.74

Pump:BTC10073 Cast Iron Centrifugal Pump 1,038.97

BTC10064 Diaphragm Pump 3,484.99

BTC10074 Stainless Steel Centrifugal Pump 1,607.14

Spray BoomBTC10323 18 Ft. Spray Boom w/ Electro-Hydraulic Lift 3,972.91

BTC10014 Multi-Size Boom, 15 ft. and 21 ft. (4.6M and 6.4M) w/ Electro-Hydraulic Lift 4,400.91

Spray Control:DSTB56277 Automatic Rate Controller Quick Reference Guide - Metric See Parts

DSTB56276 Automatic Rate Controller Quick Reference Guide - US Standard See Parts

TCB11430 Automatic Rate Controller for Centrifugal or Diaphragm Pump 2,891.14

BTC10268 Digital Manual Controller for Centrifugal or Diaphragm Pump 1,812.59



Continued

17 November 2014 U.S.G-20- 26

300 Gallon Sprayer TankElectric Boom Control ValvesElectric Flow Regulating ValveSpray Pump with Hydraulic DriveDigital Manual Rate Controllerfor Centrifugal or DiaphragmPumpNon-Siphoning Top FillRugged Booms with StandardElectro-Hydraulic Lift

Personal Wash TankJet AgitationHeavy Duty FrameSelf-Cleaning Line StrainerTriple Nozzle BodiesQuick Remove Spray ControlsBi-Directional Boom BreakawayNo-tool Sprayer Removal andAttachmentStandard Throttling Valves


SUGGESTEDLIST PRICE

USD ($)



1154TC HD300 SelectSpray(For ProGators 2020A, 2020 and 2030A, 2030)Requires TCB11078 Auxiliary Hydraulic Kit. BM19955Throttle/Governor Control Kit is Recommended.

12,279.00





PUMP1002 Diaphragm Pump 2,286.00

1003 Cast Iron Centrifugal Pump In Base Price

1004 Stainless Steel Centrifugal Pump 531.00

SPRAY CONTROLS2002 Automatic Rate Controller for Centrifugal or Diaphragm Pump 1,008.00

2003 Digital Manual Rate Controller for Centrifugal or Diaphragm Pump In Base Price

SPRAY BOOM3000 18 Ft. Spray Boom w/ Electro-Hydraulic Lift In Base Price

3001 Multi-Size Boom, 15 ft. and 21 ft. (4.6M and 6.4M) w/ Electro-Hydraulic Lift 400.00

3010 Less Spray Boom -3,713.00




17 November 2014 U.S.G-20- 27


SUGGESTEDLIST PRICE

USD ($)

SPRAY BOOM Continued...


9000 Extended Range Flat-Fan Style Nozzle PackageContains (13) Nozzle Tips, Caps, and Screens.Rated Pressure .4 GPM at 40 psi.

170.00

9005 Flood Style Nozzle PackageContains (13) Nozzle Tips, Caps, and Screens.Rated Pressure .4 GPM at 40 psi.

191.00

9010 Low Drift Nozzle KitContains (13) Nozzle Tips and Caps.

151.00

9020 Rinse Deflector Kit 222.00

9030 Electric Foam Marker 1,548.00

9040 Sprayer Storage Stand 891.00

9045 CleanLoad Chemical Eductor 2,114.00

9050 Manual Reel and 200 Ft. of 1/2 In. Hose, Less SpraygunCannot be Used with Code 9055.

1,193.00

9055 Electric Reel and 200 Ft. of 1/2 In. Hose, Less SpraygunCannot be Used with Code 9050.

1,919.00

9060 Spraygun 182.00

9070 Ground Plane WheelFor Use with Code 3001 (Multi-Size Boom).

589.00

9075 20 Gallon Rinse Tank 678.00

9080 4-Post ROPS Conversion Kit (Green)Required for Use on HD300 Sprayer.

1,583.00

9085 Heavy-Duty Rear Spring KitRequired for Use on HD300 Sprayer.

290.00

9090 Heavy Duty Front Spring KitRequired for Use on HD300 Sprayer.

290.00

9810 Smooth Front (2) Wheels and (2) Tires, 23x10.5-12 (4 PR)Set of (2) wheels and (2) tires.

470.00

9095 Wide Rear Multi-Trac (2) Tires and (2) Wheels, 26 x 14-12 (4 PR)Required for Use on HD300 Sprayer.

582.00

9799 Smooth Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR)Traction will be limited with smooth tires. Required for Use on HD300 Sprayer.

582.00

9800 Fairway Rear (2) Tires and (2) Wheels, 26x14-12 (4 PR)Required for Use on HD300 Sprayer.

582.00



Continued

17 November 2014 U.S.G-20- 28


SUGGESTEDLIST PRICE

USD ($)


TCB11078 Auxiliary Hydraulic KitFor model years 2011 and before. For 2020A and 2030A ProGators. Refer to DTACSolution 80643 for Installation on 2020 and 2030 ProGators.

941.60

TCB11681 Auxiliary Hydraulic KitFor model year 2012 and beyond 2020A and 2030A ProGators less factory installedauxiliary hydraulics.

923.41

Miscellaneous:TCB10933 20 Gallon Rinse Tank 725.46

BTC10091 4-Post ROPS Conversion Kit (Green)Required for Use on HD300 Sprayer. Retrofitable to MY11 and earlier ProGators.

1,693.81

BTC10062 CleanLoad Chemical Eductor 2,261.99

BTC10061 Electric Foam Marker 1,656.36

BM19261 Electric Reel and 200 Ft. of 1/2 In. Hose, Less Spraygun 2,053.33

BTC10261 Electronic Multi-Mode Throttle/Governor Control KitRecommended for Use with TC125 and HD200 /300 Sprayers with manual spraycontrollers. Compatible only with MY 2012 and up gas ProGators.

338.11

BM19256 Extended Range Flat-Fan Style Nozzle Package 181.90


622.74

BM19335 Flood Style Nozzle Package 204.37

BM19257 Ground Plane Wheel 630.23


310.30


310.30

VGB10129 Low Drift Nozzle Kit 161.57

BM19260 Manual Reel and 200 Ft. of 1/2 In. Hose, Less Spraygun 1,276.51

BM19979 Rinse Deflector Kit 237.54


502.90


622.74

BTC10063 Sprayer Storage Stand 953.37

BM19876 Spraygun 194.74



Continued

17 November 2014 U.S.G-20- 29


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BM19955 Throttle/Governor Control Kit

For Diesel units only. Not compatible with Gas 2020A ProGators.416.23


622.74

Pump:BTC10073 Cast Iron Centrifugal Pump 1,038.97

BTC10064 Diaphragm Pump 3,484.99

BTC10074 Stainless Steel Centrifugal Pump 1,607.14

Spray BoomBTC10323 18 Ft. Spray Boom w/ Electro-Hydraulic Lift 3,972.91

BTC10014 Multi-Size Boom, 15 ft. and 21 ft. (4.6M and 6.4M) w/ Electro-Hydraulic Lift 4,400.91

Spray Control:DSTB56277 Automatic Rate Controller Quick Reference Guide - Metric See Parts

DSTB56276 Automatic Rate Controller Quick Reference Guide - US Standard See Parts

TCB11430 Automatic Rate Controller for Centrifugal or Diaphragm Pump 2,891.14

BTC10268 Digital Manual Controller for Centrifugal or Diaphragm Pump 1,812.59



Continued

17 November 2014 U.S.G-20- 30

Galvanized Steel HopperColor CodedHydraulic HosesMetering Gate From 0-3 In.with Infinite AdjustmentHopper Capacity12 Cu. Ft. Leveled

and 19 Cu. Ft. Heaped

Seamless Conveyor Belt58 In. Spread WidthQuick Attach Design3 Pin InstallationCounter Rotating Brush190 RPM Brush SpeedAdjustable Brush Height


SUGGESTEDLIST PRICE

USD ($)



0252TC TD100 Top Dresser(For ProGators 2020A, 2020 and 2030A, 2030)Requires TCB11078 Auxiliary Hydraulic Kit. Requires BM20608, Auxiliary Hydraulic Kit.

8,235.00





0179 Europe 1,021.00



941.60

Miscellaneous:TCU13584 Raised Profile Conveyor Belt See Parts


TD100 Top Dresser(For ProGators 2020A, 2020 and 2030A, 2030)


17 November 2014 U.S.G-20- 31

31.5 In. (80.0 cm) CoringWidth4 Heavy Duty Tine Rams5 Speed Transmission1 Transport Speed4 Coring SpeedsHeavy Duty FrameSet of 4X Tine Holders forTines with 3/4 In. (19mm)

Mounting DiameterLess Tines

Turf GuardsCore Deflector ShieldsChain Tensioners25 HP (18.6 kW) KohlerCommand EngineElectro-Hydraulic Lift SystemOperator Presence SystemTire Scrapers20 X 10 - 10.00 TiresDrive Wheel Core DeflectorsFlexi-Link Adjustable Hole

SpacingMeets Carb Standards


SUGGESTEDLIST PRICE

USD ($)



4567TC Aercore 800 Aerator 19,718.00



0179 Europe 140.00




No Charge

Miscellaneous:9010 Windrow Attachment 339.00

9030 Mini Tine KitIncludes 4 Mini Tine Holders, 2 Turf Guards and 24 1/4 In. Open Sided Mini Tines.

709.00

9040 Needle Tine KitIncludes 4 Needle Tine Holders, 2 Turf Guards and 24 (5mm) Needle Tines.

554.00

9050 Verticutter 3,859.00



No Charge

JOHN DEERE TURF & UTILITY PRODUCTSAERATION

Aercore 800 AeratorEquipment for Base Machine

03 November 2014 U.S.G-25- 1


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...European CE Kit:

TCB11746 European CE Conversion Kit for Aercore 800Must be Ordered to Receive an Aercore 800 Aerator Which meetsCE Requirements. Kit Includes Tine Guard (CE), Latch Cover,Parking Brake Lever, Hardware, Pictorial Decals and Operator'sManuals in English, French, German, Spanish and Italian.

See Parts

Miscellaneous:BM19666 Mini Tine Kit

Includes 4 Mini Tine Holders, 2 Turf Guards and 24 1/4 In. Open Sided Mini Tines.758.63

TCB10525 Needle Tine KitIncludes 4 Needle Tine Holders, 2 Turf Guards and 24 (5mm) Needle Tines.

592.79

TCB11072 Verticutter 4,129.13

BM19073 Windrow Attachment 362.73

Tine Holders:AMT1831 4X Tine Holder, Less Tines, and Core Deflector See Parts

TCA51330 4X Tine Holder, Less Tines, and Core Deflector See Parts

AMT1832 Mini Tine Holder, Less Tines & Core Deflector See Parts

TCA51345 Needle Tine Holder, Less Tines & Core Deflector See Parts

Tines:TCU17331 1 In. HD Side-Eject See Parts

TCU17333 1 In. HD Tubular Top-Eject See Parts

TCU17332 1 In. HDT Side-Eject See Parts

TCU17334 1 In. HDT Tubular Top-Eject See Parts

TCU17450 1/2 In. (12.7 mm) Tubular Tine See Parts

TCU17343 1/2 In. HD Tubular See Parts

TCU17345 1/2 In. HDT Side-Eject See Parts

TCU17344 1/2 In. HDT Tubular See Parts

TCU17452 1/4 In. (6 mm) Open Sided Mini Tine See Parts

TCU17456 13/16 In. HD Side-Eject See Parts


TCU18638 3/4 In. (19mm) Tubular Tine See Parts





Aercore 800 AeratorContinued

03 November 2014 U.S.G-25- 2


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCU17449 3/8 In. (9.5 mm) Tubular Tine See Parts

TCU17346 3/8 In. Solid HD x 5 In. See Parts

TCU15712 5 mm Needle Tine See Parts

TCU17451 5/8 In. (16 mm) Tubular Tine See Parts

TCU17338 5/8 In. HD Solid See Parts






TCU15726 8 mm Needle Tine See Parts

TCU17352 Bayonet Tine with 3/4 In. Rib HD See Parts

TCU17349 Cross with 1/2 In. Rib HD See Parts

TCU17350 Cross with 1/2 In. Rib HDT See Parts

TCU17453 Quad Tine HDT See Parts

TCU17351 Super Cross with 3/4 In. Rib HD See Parts

TCU17347 Super Quad HD See Parts

TCU17348 Super Quad HDT See Parts

Turf Guards:MT4886 Left Hand Turf Guard for 4X Tine Holder See Parts

MT4941 Left Hand Turf Guard for Mini Tines See Parts

MT4885 Right Hand Turf Guard for 4X Tine Holder See Parts

MT4942 Right Hand Turf Guard for Mini Tines See Parts



03 November 2014 U.S.G-25- 3

37.5 In. (95.3 cm) CoringWidthCat. 1 3-Point HitchHeavy Duty FrameTurf GuardLess TinesTine HoldersParking Stand

4 Heavy Duty Tine Rams540 RPM PTO ShaftFlexi-Link Adjustable HoleSpacing

Core Deflector Shields


SUGGESTEDLIST PRICE

USD ($)



4523M Aercore 1000 Aerator 10,655.00



0179 Europe 242.00



TINE HOLDERS1010 4X Tine Holders for Tines with 3/4 In. (19mm) Mounting Diameter

Set of 4.In Base Price

1020 4X Tine Holders for Tines with 7/8 In. (22.2 mm) Mounting DiameterSet of 4.

Same Price

1030 3X Tine Holders for Tines with 7/8 In. (22.2mm) Mounting DiameterSet of 4.

Same Price

1040 Mini Tine Holders for Tines with 3/8 In. (9.5mm) Mounting DiameterSet of 4.

-88.00

1050 Needle Tine Holders for 5 mm and 8 mm Needle TinesSet of 4.

-148.00

TURF GUARDS2010 Turf Guards for all 4X Tine Holders

Complete Set of Turf Guards. Tines and Tine Holders not included.In Base Price

2020 Turf Guards for 3X Tine HoldersComplete Set of Turf Guards. Tines and Tine Holders not included.

16.00



03 November 2014 U.S.G-25- 4


SUGGESTEDLIST PRICE

USD ($)

TURF GUARDS Continued...2030 Turf Guards for Mini Tine and Needle Tine Holders

Complete Set of Turf Guards. Tines and Tine Holders not included.21.00

PTO SHAFT3010 Category I Double Telescoping PTO Shaft

For most tractors equipped with Category I 3-pt. hitches.In Base Price

3020 Category II Double Telescoping PTO ShaftFor most tractors equipped with Category II 3-pt. hitches.

Same Price


9010 Windrow Attachment 339.00

9020 Set of 4X Tine Holders for Tines with 3/4 In. (19mm) Mounting Diameter(Set of 4) Does not include Tines or Turf Guards

538.00

9040 Set of 3X Tine Holders for Tines with 7/8 In. (22.2mm) Mounting Diameter(Set of 4) Does not include Tines or Turf Guards.

538.00

9050 Set of Mini Tine Holders for Tines with 3/8 In. (9.5mm) Mounting Diameter(Set of 4) Does not include Tines or Turf Guards.

450.00

9060 Set of Needle Tine Holders for 5mm and 8mm Needle Tines(Set of 4) Does not include Tines or Turf Guards.

390.00

9070 Turf Guards for all 4X Tine HoldersComplete Set of Turf Guards. Tines and Tine Holders not included.

126.00


142.00

9090 Turf Guards for Mini Tine and Needle Tine HoldersComplete Set of Turf Guards. Tines and Tine Holders not included.

147.00

ATTACHMENTS FOR FIELD CONVERSIONTine Holders:

BTC10182 Set of (2) 3X Tine Holders for Tines with 3/4 In. (19 mm) Mounting Diameter 287.83

BTC10180 Set of (2) 4X Tine Holders for Tines with 3/4 In. (19 mm) Mounting Diameter 287.83

BTC10184 Set of (2) Mini Tine Holders for Tines with 3/8 In. (9.5 mm) Mounting Diameter 208.66

BTC10187 Turf Guard Base Kit for all 4X Tine Holders 134.81



03 November 2014 U.S.G-25- 5

57.5 In. (146.1 cm) CoringWidthCat. 1 3-Point HitchHeavy Duty FrameTurf GuardLess TinesTine HoldersParking Stand




SUGGESTEDLIST PRICE

USD ($)



4553M Aercore 1500 Aerator 30,771.00



0179 Europe 242.00




Set of 6.Same Price

1020 4X Tine Holders for Tines with 7/8 In. (22.2 mm) Mounting DiameterSet of 6.

In Base Price

1030 3X Tine Holders for Tines with 7/8 In. (22.2mm) Mounting DiameterSet of 6.

Same Price

1040 Mini Tine Holders for Tines with 3/8 In. (9.5mm) Mounting DiameterSet of 6.

-132.00

1050 Needle Tine Holders for 5 mm and 8 mm Needle TinesSet of 6.

-222.00




26.00



03 November 2014 U.S.G-25- 6


SUGGESTEDLIST PRICE

USD ($)

TURF GUARDS Continued...2030 Turf Guards for Mini Tine and Needle Tine Holders

Complete Set of Turf Guards. Tines and Tine Holders not included.31.00



3020 Category II Double Telescoping PTO ShaftFor most tractors equipped with Category II 3-pt. hitches.

Same Price


9010 Windrow Attachment 388.00

9020 Set of 4X Tine Holders for Tines with 3/4 In. (19mm) Mounting Diameter(Set Of 6) Does not include Tines or Turf Guards.

807.00


807.00


807.00

9050 Set of Mini Tine Holders for Tines with 7/8 In. (22.2mm) Mounting Diameter(Set of 6) Does not Include Tines or Turf Guards.

675.00

9060 Set of Needle Tine Holders for 5mm and 8mm Needle Tines(Set of 6) Does not include Tines or Turf Guards.

585.00


189.00


215.00

9090 Turf Guards for Mini Tine and Needle Tine HoldersComplete Set of Turf Guards. Tines and Tine Holders not included.

220.00


BM18886 Windrow Attachment 415.16

Tine Holders:BTC10182 Set of (2) 3X Tine Holders for Tines with 3/4 In. (19 mm) Mounting Diameter

Does not include Tines or Turf Guards.287.83

BTC10183 Set of (2) 3X Tine Holders for Tines with 3/4 In. (19 mm) Mounting DiameterDoes not include Tines or Turf Guards.

240.76


287.83



03 November 2014 U.S.G-25- 7


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...BTC10181 Set of (2) 4X Tine Holders for Tines with 7/8 In. (22.2 mm) Mounting Diameter

Does not include Tines or Turf Guards.287.83

BTC10184 Set of (2) Mini Tine Holders for Tines with 3/8 In. (9.5 mm) Mounting DiameterDoes not include Tines or Turf Guards.

208.66

BTC10186 Turf Guard Add Kit for all 3X Tine HoldersComplete set of 3X Turf Guards for Aercore 1500 requires (1) BTC10185 and (1)BTC10186.

78.11


67.41

BTC10190 Turf Guard Add Kit for all Mini and Needle Tine HoldersComplete set of Mini / Needle Tine Turf Guards for Aercore 1500 requires (1) BTC10189and (1) BTC10190.

78.11

BTC10185 Turf Guard Base Kit for all 3X Tine HoldersComplete set of 3X Turf Guards for Aercore 1500 requires (1) BTC10185 and (1)BTC10186.

151.94


134.81

BTC10189 Turf Guard Base Kit for all Mini and Needle Tine HoldersComplete set of Mini / Needle Tine Turf Guards for Aercore 1500 requires (1) BTC10189and (1) BTC10190.

157.29


TCU17333 1 In. HD Tubular Top-Eject See Parts














03 November 2014 U.S.G-25- 8


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCU17340 3/4 In. HDT Tubular See Parts


TCU15712 5 mm Needle TineAercore 1500 with Needle Tine Holders Requires 42.

See Parts







TCU15726 8 mm Needle TineAercore 1500 with Needle Tine Holders Requires 42.

See Parts










03 November 2014 U.S.G-25- 9

77.5 In. (190.6 cm) CoringWidthCat. 1 3-Point HitchHeavy Duty FrameTurf GuardsLess TinesTine HoldersParking Stand




SUGGESTEDLIST PRICE

USD ($)



0402TC Aercore 2000 Aerator 35,130.00



0179 Europe 242.00




Set of 8. Tines are not included.Same Price

1020 4X Tine Holders for Tines with 7/8 In. (22.2 mm) Mounting DiameterSet of 8. Tines are not included.

In Base Price

1030 3X Tine Holders for Tines with 7/8 In. (22.2mm) Mounting DiameterSet of 8. Tines are not included.

Same Price




36.00





03 November 2014 U.S.G-25- 10


SUGGESTEDLIST PRICE

USD ($)

PTO SHAFT Continued...3020 Category II Double Telescoping PTO Shaft

For most tractors equipped with Category II 3-pt. hitches.Same Price


9020 Set of 4X Tine Holders for Tines with 3/4 In. (19mm) Mounting Diameter(Set of 8) Does not Include Tines or Turf Guards.

1,076.00

9030 Set of 4X Tine Holders for Tines with 7/8 In. (22.2mm) Mounting Diameter(Set of 8) Does not Include Tines or Turf Guards.

1,076.00

9040 Set of 3X Tine Holders for Tines with 7/8 In. (22.2mm) Mounting Diameter(Set of 8) Does not Include Tines or Turf Guards.

1,076.00


252.00


288.00

ATTACHMENTS FOR FIELD CONVERSIONTine Holders:


287.83


287.83

BTC10181 Set of (2) 4X Tine Holders for Tines with 7/8 In. (22.2 mm) Mounting DiameterDoes not include Tines or Turf Guards.

287.83


78.11


67.41

BTC10190 Turf Guard Add Kit for all Mini and Needle Tine Holders 78.11


151.94


134.81

BTC10189 Turf Guard Base Kit for all Mini and Needle Tine Holders 157.29




03 November 2014 U.S.G-25- 11


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...TCU17333 1 In. HD Tubular Top-Eject See Parts





























03 November 2014 U.S.G-25- 12

Hydraulic Requirements:6 gpm, 2000 psi (MiniumumContinuous)48 In. (121.9 cm) GatheringWidth25 Cu. Ft. (0.71 cu. m)Hopper CapacityAttaches With Standard3/4 In. (19 mm) Hitch PinOffset Towing Feature Allowsthe Unit to be Towed EitherDirectly Behind or Offsetto the Left Side of theTowing Vehicle

3 (1/2 In.) Quick ConnectCouplers (2 Rotary Brush,1 Lift Cylinder)

Long Hose Kit for use withCompact Utility Tractorswith 1/2 In. Forward

Couplers49 In. (124.5 cm) DumpHeight Clearance

Hydraulic Lift CylinderHydraulic Powered RotaryBrush

500 - 600 RPM Brush Speed6 In. (15.24 cm) Diameter

Full Width RollerClears Cores of an AverageGreen in 15 Minutes withOne Person Operation

Two 26.5x14-12 Tires


SUGGESTEDLIST PRICE

USD ($)



0132TC TC125 Turf Collection SystemVehicle Requirements: Powered by a Compact Utility Tractorwith a Selective Control Valve (SCV) or a ProGator WithAuxiliary Hydraulics. Use with ProGator may Require QuickConnect Kit (VGB10058), See Sales Manual for Serial Number Breaks.

12,474.00



0179 Europe Same Price



Hydraulic Hose KitsIf 3/8 In. Hydraulic Adapters and Couplers on 90 Degree Fittings are Required, See SalesManual for Required Service Parts.

1000 Less Hose Kit -500.00

1001 Long Hose KitFor Tractor with 1/2 In. Forward Couplers.

In Base Price

1002 Short Hose KitFor ProGator or Tractor with 1/2 In. Rear Couplers.

-72.00


JOHN DEERE TURF & UTILITY PRODUCTSDEBRIS MAINTENANCE

TC125 Turf Collection SystemEquipment for Base Machine

03 November 2014 U.S.G-30- 1


SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION Continued...Hydraulics:


941.60

Miscellaneous:TCB10032 Hose Kit, Long

For Tractor with 1/2 In. Forward Couplers.535.00

TCB10033 Hose Kit, ShortFor ProGator or Tractor with 1/2 In. Rear Couplers.

457.96

VGB10058 Quick Connect KitProGator may Require Quick Connect Kit. See Sales Manual for Serial Number Breaks.

73.83

TCA13146 Roller ScraperFor Serial Numbers 015001 and below, the Following Brackets need to be Ordered(Machines above Serial Number 015001 will have the Brackets Installed), (2) MT 6430and (2) MT 6682.

See Parts

BM19955 Throttle/Governor Control KitRecommended for Use with ProGators.

416.23

JOHN DEERE TURF & UTILITY PRODUCTSDEBRIS MAINTENANCE

TC125 Turf Collection SystemContinued

03 November 2014 U.S.G-30- 2

john deere golf products 180sl precisioncut walk greens ... · bm24127 (1) quick adjust 5 (qa5)...

Documents