joséxavier

Personal dataFull name José Manuel Cardoso Xavier

Work address1 University of Trás-os-Montes e Alto Douro (UTAD) mScience and Technology School (ECT)Centre for the Research and Technology of Agro-Environmental & Biological Sciences(CITAB) mQuinta de Prados, 5000-801 Vila Real, Portugal

T +351 259 350 306u +351 259 350 356k jmcx@utad.pt

URL http://home.utad.pt/~jmcx/

Work address2 Institute of Mechanical Engineering and Industrial Management (INEGI) mOptics and Experimental Mechanics Laboratory (LOME)Campus da FEUP, Rua Dr. Roberto Frias, 400, 4200-465 Porto, Portugal

T +351 225 082 150u +351 225 081 584k jxavier@inegi.up.pt

ORCID 0000-0002-7836-4598 mResearcherID A-4348-2013 m

Scopus ID 16317714700 mGoogle Scholar m

Curriculum vitæ of J. Xavier z July 16, 20151/29

Academic degrees11.2007 Ph.D., Characterisation of the wood stiffness variability within the stem by the virtual

fields method: Application to P. pinaster in the LR plane, Arts et Métiers ParisTech,Châlons-en-Champagne, France, November 27, 2007.(FCT: SFRH/BD/11324/2002)

10.2003 M.Sc., Characterisation of the shear behaviour of wood using the Iosipescu test, Uni-versity of Trás-os-Montes e Alto Douro, October 9, 2003.

7.1999 B.Sc., Mechanical Engineering, University of Trás-os-Montes e Alto Douro, July 271999. (Merit award from Fundação Engenheiro António de Almeida)

Current status and previous activitiesCurrent position

present02.2015

Invited lecturer (Professor Auxiliar Convidado a Tempo Integral) (PT).Universidade de Trás-os-Montes e Alto Douro (UTAD) | Escola de Ciéncia e Tecnologia (ECT)| Departamento de Engenharias | Área disciplinar de Eng. Mecânica - Mecânica aplicada.

Previous activities02.201504.2014

Post-Doc Research Assistant (PT).Institute of Mechanical Engineering and Industrial Management (INEGI) m | Optics andExperimental Mechanics Laboratory (LOME) | Porto University Biomechanics Laboratory(LABIOMEP) m Program RES2IN: RT1 Biomechanics contributions to healthcare.

3.20147.2009

Post-Doc Research Assistant, Centre for the Research and Technology of Agro-Environment and Biological Sciences (CITAB/UTAD) m.Program Ciência2008 supported by the European Science Foundation and MCTES - throughthe POPH-QREN - Typology 4.2. Contract

6.20091.2008

Researcher fellowship at INEGI/UP (PT).Research project: “Experimental assessment of moisture effects on aging durability of ther-mosetting polymers” (FTC: PTDC/EME-PME/67791/2006)

11.200711.2003

PhD candidate at Arts et Métiers ParisTech (FR).Ph.D. student at LMPF/ENSAM Châlons-en-Champagne; collaboration in the teaching serviceat ENSAM Châlons-en-Champagne

10.20039.1999

Invited assistant lecturer and MSc candidate at UTAD (PT).Invited as a guest assistant lecturer at the Engineering Department of UTAD; M.Sc. studentat UTAD; holder of a scholarship in the research project: “Non-linear mechanical behaviour ofwood” (FCT: POCTI/36270/EME/2000);

Participation in projectsResearch projects

2015–2019 Innovative photomechanical approaches in identification of the dynamic mechan-ical behaviour of materials m, University of Southampton (UK), Role:Investigator,Financial support by EPSRC Fellowship EP/L026910/1.

2014–2015 Definição de critérios para a determinação da fadiga de um militar em contextosde emprego climáticos diversos, Institute of Mechanical Engineering and IndustrialManagement (INEGI/UP), Role:Investigator, Financial support by Ministério da defesanacional (ESE-INEGI-FEUP-LABIOMEP-CPAE).

Curriculum vitæ of J. Xavier z July 16, 20152/29

2014–2015 Stabilo Twin Arch Shoes (STAR Shoes), Institute of Mechanical Engineering andIndustrial Management (INEGI/UP), Role:Investigator, Financial support by ROPARQREN 38415.

2012-2013 Methods for the characterization of the translaminar fracture toughness ofpolymer composites, Instituto de Engenharia Mecânica e Gestão Industrial (IN-EGI/UP), Role:Investigator, Financial support by Daimler AG (Contract: Daimler PO1059203795).

2012–2015 2genComp – second generation Composites, Instituto de Engenharia Mecânica eGestão Industrial (INEGI/UP), Role:Investigator, Financial support by Airbus Industries(Contract: Airbus PO 8202919946).

2012–2015 Fracture behaviour of cortical bone under mixed-mode I+II loading, Institutode Engenharia Mecânica e Gestão Industrial (INEGI/UP), Role:Investigator (20%), Fi-nancial support by Portuguese Foundation for Science and Technology (PTDC/EME-PME/119093/2010).

2013 High strain rate characterization of polymer composites - Project II, Institutode Engenharia Mecânica e Gestão Industrial (INEGI/UP), Role:Investigator, Financialsupport by Aernnova Company (Contract: UMEC-AERN-2012-11-24).

2011-2012 High strain rate effects on textile and unidirectional composites, Instituto de En-genharia Mecânica e Gestão Industrial (INEGI/UP), Role:Investigator, Financial supportby Aernnova Company (Contract: AESI/11-052).

2011–2014 Numerical and experimental study of cohesive laws in bonded wood joints,University of Trás-os-Montes e Alto Douro (UTAD), Role:Investigator (20%), Finan-cial support by Portuguese Foundation for Science and Technology (PTDC/EME-PME/114443/2009).

2011–1012 PromoAgro – Promotion of Agro-food Competitiveness, University of Trás-os-Montes e Alto Douro (UTAD), Role:Investigator, Financial support by CCDRN - ON.2(Strategic Project–UI 4033–2011-2012. PEst-C/AGR/UI4033/2011).

2009–2012 iComp- integrated method for structural design of Composite components, Insti-tute of Mechanical Engineering and Industrial Management, Role:Investigator, Financialsupport by Airbus Industries (Contract: Airbus PO 2311292).

2008–2009 Experimental assessment of moisture effects on aging and durability of ther-mosetting polymers, Institute of Mechanical Engineering and Industrial Manage-ment (INEGI/UP), Role:scientific research scholarship-holder, Financial support by Por-tuguese Foundation for Science and Technology (PTDC/EME-PME/67791/2006).

2001–2003 Non-linear mechanical behaviour of wood, University of Trás-os-Montes e AltoDouro (UTAD), Role:Scientific research scholarship-holder, Financial support by Por-tuguese Foundation for Science and Technology (POCTI/36270/EME/2000).

Teaching experienceArts et Métiers ParisTech, Châlons-en-Champagne, France m.(Contrat d’enseigment vacataire)

2006–2007 Mécanique des solides déformables (3): Introduction à la méthode des eléments finis (TP).2005–2006 Mécanique du solide (TP).2004–2005 2nd Semester: Mécanique (TP).

Curriculum vitæ of J. Xavier z July 16, 20153/29

UTAD, Vila Real, Portugal m.(Professor auxiliar convidado a tempo integral)

2014-2015 2st Semester:1st cycle: Mecânica das Estruturas [T(1,2)+TP(1,2)+O(1,2)](Mechanical Engineering, 3rd

year); Desenho de Engenharia II [T(1,2,3)](Mechanical Engineering and Energy Engineering,1st year).2nd cycle: Projeto de Estruturas I (T1+TP1+O1)(Mechanical Engineering, 1st year); Sim-inário II (Mechanical Engineering, 1st year); Projeto de Sistemas Térmicos II (O1) (MechanicalEngineering, 1st year).(Colaborador no serviço docente - Ciência 2008)

2008-present Invited to collaborate in lecturing at mechanical and energy engineering courses: 1st cycle –Seminário I, IV, V ; 2nd cycle – Seminário I, II, Projecto de Sistemas Térmicos I (O1).

(Colaborador no serviço docente - trabalhador independente)2002-2003 1st Semester: Mecânica das Estruturas (T+TP)(Mechanical Engineering).

2nd Semester: Tecnologia Mecânica II (TP)(Mechanical Engineering).2001-2002 1st Semester: Análise de Custos Industriais (TP)(Electrical Engineering).

2nd Semester: Análise de Custos Industriais (TP)(Electrical Engineering).2000-2001 1st Semester: Desenho de Construções Mecânicas (T+TP)(Mechanical Engineering); Análise

de Custos Industriais (TP)(Electrical Engineering).2nd Semester: Tecnologia Mecânica II (TP)(Mechanical Engineering).

1999-2000 1st Semester: Mecânica Aplicada II (TP)(Mechanical Engineering); Análise de Custos Industriais(TP)(Electrical Engineering).

T - Aula Teórica; TP - Aula Teórico-Prática; O – Outras.

Supervising experiencePh.D. thesesSupervision

2013 João Luís Pereira. Assessing wood quality by spatial variability of transverse elasticproperties within the stem: Case study on P. pinaster at the meso scale. University ofBeira Interior, Covilhã, Portugal. Supervision: José Xavier, José Lousada, Abílio Silva(UBI). (SFRH/PROTEC/50149/2009), University of Beira Interior, Covilhã, 17 June2013.

Co-supervision(in progress) Pedro Miguel Gomes Fernandes. Estudo da durabilidade da ligação entre o betão e

laminados de CFRP de acordo com a técnica NSM. University of Minho, Guimarães,Portugal. Supervision: José Sena-Cruz, José Xavier. (SFRH/BD/80338/2011)

(in progress) Filipe Alexandre Loureiro Pagaimo. Estudo de caracterização da artroplastia cervical– características bimecânicas in vivo. Instituto Superior Técnico, Lisbon, Portugal.Supervision: Paulo Rui Alves Fernandes (IST), José Xavier (INEGI/LABIOMEP), ÓscarLuis Alves (Hosp. Lusíadas Porto/CHGE).

M.Sc. dissertations (post-Bologna)

Curriculum vitæ of J. Xavier z July 16, 20154/29

Supervision2015 Vítor Hugo Moura. Caracterização do comportamento elástico da madeira no plano

transversal através de métodos inversos. University of Trás-os-Montes e Alto Douro,Vila Real. Supervision: José Xavier, João Luís Pereira (IPV).

2014 Wilson Tiago Henriques da Cruz. Identificação de propriedades elásticas da madeiraatravés de um ensaio de flexão de placa. University of Trás-os-Montes e Alto Douro,Vila Real. Supervision: José Xavier, José Morais.

2014 Diogo Almeida Mesquita. Identificação do compotamento ao corte do tecido ósseocortical usando correlação digital de imagem. University of Trás-os-Montes e AltoDouro, Vila Real. Supervision: José Xavier, José Morais.

2013 Joaquim Diogo da Silva Pinto de Moura. Caracterização de propriedades elásticas depainéis MDF através do método das grelhas. University of Trás-os-Montes e Alto Douro,Vila Real. Supervision: José Xavier, José Morais.

2012 Alfredo José Gonçalves Ribeiro. Caracterização de parâmetros de fractura de um epóxidousando correlação digital de imagem. University of Trás-os-Montes e Alto Douro, VilaReal. Supervision: José Xavier, José Morais.

Co-supervision2014 Bruno Filipe Borges de Carvalho. Caracterização numérica e experimental de ligações

aparafusadas de madeira. Master thesis in Mechanical Engineering, University of Trás-os-Montes e Alto Douro, Vila Real. Supervision: Nuno Dourado, José Xavier.

2014 Joana Margarida dos Santos Lopes. Estudo sobre as ligações em Estruturas de Madeirado passado para o futuro: caso de estudo Casa da Quinta da Tranqueira. University ofTrás-os-Montes e Alto Douro, Vila Real. Supervision: Eunice Salavessa, José Xavier.

2013 Pedro Miguel Fernandes Monteiro. Caracterização da madeira de Pinus pinaster àfratura em modo I à escala dos anéis de crescimento. University of Trás-os-Montes eAlto Douro, Vila Real. Supervision: José Morais, José Xavier.

2013 Nastaran Malek. Determining radial and tangential shrinkage coefficients of wood bystandard and digital image correlation methods. University of Minho, Guimarães. Su-pervision: Jorge Branco, José Xavier.

2013 Francisco Fernandes Luiz. Fratura do tecido ósseo cortical de bovino jovem em modomisto para o ensaio SLB. University of Trás-os-Montes e Alto Douro, Vila Real. Super-vision: Nuno Dourado, José Xavier.

2013 António José Oliveira Meireles. Efeito de escala em provetes de geometria TDCB:Comportamento da Curva-R e análise assimptótica. University of Trás-os-Montes eAlto Douro, Vila Real. Supervision: Nuno Dourado, José Xavier.

2012 Bruno José Alves Diaquino. Identificação das propriedades elásticas do tecido ósseocortical usando o ensaio de Arcan. University of Trás-os-Montes e Alto Douro, VilaReal. Supervision: José Morais, José Xavier.

2010 João Paulo Neto Martins. Bases para o projecto de conservação, restauro e reabilitaçãode edifícios antigos: estudos sobre Quinta do Concelho de Guimarães. University ofTrás-os-Montes e Alto Douro, Vila Real. Supervision: Eunice Salavessa, José Xavier.

Curriculum vitæ of J. Xavier z July 16, 20155/29

2009 José Luis Vilaverde Queiroz. Estudo do envelhecimento físico de um polímero estrutural.University of Trás-os-Montes e Alto Douro, Vila Real. Supervision: José Morais, JoséXavier.

Arguing member of the jury of M.Sc. and Ph.D. thesisPh.D.

2015 Almudena Majano-Majano. Madera termotratada de frondosa para uso estructural.Madrid Polytechnic University (UPM), Madrid, Spain. Supervision: Jose Fernandez-Cabo.

2013 José Luís Pereira. Assessing wood quality by spatial variability of transverse elasticproperties within the stem: Case study on P. pinaster at the meso scale. University ofBeira Interior, Covilhã, Portugal. Supervision: José Xavier, José Lousada, Abílio Silva.

2011 Loane Bigorgne. Mécanique et mécanismes de rupture dans le plan transverse du boisrésineux. INSA de Lyon, France. Supervision: Hubert Maigre, Michel Brunet (INSA deLyon, FR).

2011 António Manuel Ribeiro de Sousa. Measurement of displacement fields based on dig-ital image correlation and differential techniques. University of Trás-os-Montes e AltoDouro, Vila Real. Supervision: Mário Vaz (FEUP), Vítor Filipe (UTAD).

M.Sc.2014 Mónica Filomena Castro Ferreira. Estudo do envelhecimento térmico de um epóxido

por técnicas de aniquilação de positrões e ensaios mecânicos. Mestrado em Engen-haria Mecânica. Universidade de Trás-os-Montes e Alto Douro, Vila Real, Portugal.Supervision: Marco Naia; José Morais.

2014 Sara Catarina Pereira Gonçalves. Avaliação ergonómica e de lesões músculo-esqueléticasdos técnicos de ambulância de emergência. Mestrado em Engenharia de Segurança eHigiene Ocupacionais. FEUP, Universidade do Porto, Porto, Portugal. Supervision:Mário Augusto Pires Vaz, Maria Eugénia Ribeiro de Castro Pinho.

2014 Tiago Soares Pinheiro. Acidentes de trabalho na pesca local: zona de póvoa de varzime vila do conde. Mestrado em Engenharia de Segurança e Higiene Ocupacionais. FEUP,Universidade do Porto, Porto, Portugal. Supervision: João Manuel Abreu dos SantosBaptista.

2013 Dinis Passos de Sousa. Reabilitação de uma casa do século XIX, de felgueiras: carac-terização, diagnóstico das anomalias cosntrutivas e bases para o projecto de restauroe reabilitação. Mestrado em Engenharia Civil. Universidade de Trás-os-Montes e AltoDouro, Vila Real, Portugal. Supervision: Eunice Salavessa, José Correia.

2012 Rui Miguel da Rocha Pereira Fernandes. Definição de uma lei coesiva para juntascoladas em Carbono-Epóxido solicitadas em Modo II. University of Porto, FEUP, Porto,Portugal. Supervision: José Chousal, Marcelo Moura.

2012 Tatiana Vanessa Pires Caldeira. Caracterização experimental e numérica do comporta-mento frágil de ligações com cavilhas em estruturas de madeira. University of Trás-os-Montes e Alto Douro, Vila Real, Portugal. Supervision: Abílio de Jesus (UTAD), NunoDourado (UTAD).

Curriculum vitæ of J. Xavier z July 16, 20156/29

2011 João Carlos Cunha Costa. Influência da água no comportamento de madeiras resinosas.University of Minho, Guimarães, Portugal. Supervision: Jorge Branco, Aires FernandoCamões (UM).

2009 Helder Andrade Dinis Dâmaso. Comportamento à fractura em modo I e em modo IIde ligações coladas entre madeira e compósitos. University of Trás-os-Montes e AltoDouro, Vila Real, Portugal. Supervision: José Morais (UTAD), Marcelo de Moura(FEUP).

Journal reviewing2015 BioResources m; Canadian Journal of Forest Research m; Ciência & Tecnologia dos

Materiais m; Composite Structures m; Engineering Fracture Mechanics m; EngineeringScience and Technology: an International Journal m; Journal of Cultural Heritage m;Experimental Mechanics (2) m; Polymers m; Procedia Engineering m; Strain m; WoodScience and Technology (2) m.

2014 BioResources m; Composite Structures m; Construction & Building Materials m; Exper-imental Mechanics m; Fracture and Structural Integrity Journal m; Holzforschung m;International Journal of Structural Integrity m; Mechanics Research Communicationsm; Strain m; Wood Science and Technology m.

2013 International Journal for Computational Methods in Engineering Science & Mechanicsm; Journal of the Mechanical Behavior of Biomedical Materials m; Holzforschung m;Strain m.

2012 Journal of Adhesion Science and Technology m; Journal of Materials: Design andApplications m; Optics and Lasers in Engineering m.

2011 Composites Part A: Applied Science and Manufacturing m; Experimental Mechanics m;Mecânica Experimental (APAET) m

University service and management2013–2014 Responsible Investigator of the task “Mechanical behaviour of bio-based materials (wood

and bone)” of the project “Bio-based materials” at CITAB m.2011–2012 Responsible Investigator of the task “Mechanical behaviour of bio-based materials and

structures” of the project “Bio-based materials and energy” at CITAB.2010–2014 Member of the Executive Committee of CITAB.

Internationalisation2003–present Fabrice Pierron (University of Southampton, UK m) and Stéphane Avril (Ecole des

Mines de Saint-Etienne, FR m): material parameter identification of heterogeneousmaterials (wood, wood-based products, bio-based materials, bone tissue) by couplingthe virtual fields method with full-field deformation measurements.

2011-present Hannes Körber (Technical University of Munich, D m): high strain rate characterisationof advanced composite material.

2015-present Fabrice Pierron (University of Southampton, UK m): high strain rate characterisationof wood at the meso scale (letter of support to a EPSRC proposal ).

Curriculum vitæ of J. Xavier z July 16, 20157/29

2011-2015 José Fernandez-Cabo, Almudena Majano-Majano (Technical University of Madrid,Madrid, ES m): multi-parameter identification of clear wood by coupling 3D full-fieldmeasurements with the anisotropic-based method.

2010-2012 Mário Tomazel (University of São Paulo, BR m): mechanical characterisation of MDFpanels incorporating recycled sugarcane bagasse particles (Grices-Capes internationalprogram m).

2013-2017 Portuguese representative of the Management Committee of the COST Action FP1302- Wood Musick m.

2011-2015 Participating in the Working Group 3 of the of the FPS COST Action FP1004: “Enhancemechanical properties of timber, engineered wood products and timber structures” m.

2009-2012 Portuguese representative of the Working Group 3: Computational modelling, of theCOST Action FP0802 - Experimental and computational methods in wood microme-chanics m.

Prizes and awards received2007 Prize Eng.a Cruz Azevedo attributed by the Portuguese Association for Experimental

Stress Analysis to J. Xavier, N. Garrido, J. Morais, J. Pinto and P. Camanho, authors ofthe article Numerical and experimental study of the variable span method for the iden-tification of elastic properties of wood (in Portuguese), considered the best publishedcontribution in the journal Mecânica Experimental during 2007.

1999 Prize Fundação Engenheiro António de Almeida for obtaining the highest classification inthe academic year of 1998/99 in the course of Mechanical Engineering at the Universityof Trás-os-Montes e Alto Douro.

Foreign languagesUnderstanding Speaking Writing

English: C1 C1 C1France: C1 C1 C1Italian: C1 B2 B1

Membership of scientific, organizing committees2015 . Member of the Scientific Committee. 10th International Conference on Advances in

Experimental Mechanics, British Society for Strain Measurement (BSSM), Heriot-WattUniversity, Edinburgh, UK, 1-3 September. m

2014 . Chair, Sessions on Bio-Mechanics and Testing. 2nd International Conference of the In-ternational Journal of Structural Integrity, Funchal, Madeira, Portugal, 1-4 September.m

. Member of the organizing committee and national scientific committee of the XIVPortuguese Conference on Fracture (PCF2014), University of Trás-os-Montes e AltoDouro, Hotel Douro, Régua, Portugal, 6-7 Febrary. m

2013 . Chairman of the workshop: Bio-based material characterisation from full-field measure-ments, University of Trás-os-Montes e Alto Douro, Vila Real, Portugal, 9 July. m

Curriculum vitæ of J. Xavier z July 16, 20158/29

. Chairman of the course deliver by Prof. Fabrice Pierron: The Virtual Fields Method:Extracting Constitutive Mechanical Parameters from Full-field Deformation Measure-ments, University of Trás-os-Montes e Alto Douro, Vila Real, Portugal, 8 July. m

2012 . Chair, Session on Experimental methods for the mechanical characterization of compos-ites. 15th International Conference on Experimental Mechanics, Faculty of Engineering,University of Porto, Portugal, 22-27 July. m

2011 . Chair, Session on Ensaios e métodos experimentais. 1◦ Congresso Ibérico-Latino Amer-icano de Madeira na Construção, CIMAD11, Universidade de Coimbra, Coimbra, 7-9Junho.

. Chairman of the workshop: Mixed numerical and experimental methods applied to themechanical characterization of bio-based materials, COST ACTION FP0802, Vila Real,Portugal, 27-28 Abril. m

2010 . Chair, Session on Métodos Ópticos de Análise Experimental/Análise Dinâmica eVibrações/Comportamento de Materiais. 8◦ Congresso Nacional de Mecânica Experi-mental, APAET, Universidade do Minho, Guimarães, 21-23 Abril.

2005 . Member of the Organizing Committee of the 17 ème Congrès Français de Mécanique,Troyes, France, 30 August-2 September.

2004 . Member of the Scientific Committee of the 1◦ Iberian Congress: Wood in Construction.University of Minho, Guimarães, Portugal, 25-26 March.

2003 . Member of the Organizing Committee of the Workshop: Mecânica da Madeira, UTAD,Vila Real, Portugal, 10 January.

Invited seminaries, scientific journeys, workshops, conferences.COST Actions and STSM

2015: . Xavier, J.; Cruz, W.; Pierron, F.; Morais, J. Characterization of stiffness componentsof wood from heterogeneous plate bending tests. Workshop “Effects of Playing onEarly and Modern Musical Instruments”, COST Action FP1302 – WOOD MUSICK,London, Royal College of Music, UK, 9-10 September, 2015.

. Silva, E.; Bochmann, C.; Xavier, J.; Fonseca, P.; Garganta, R Levels and angulations ofthe left hand a contribute to violinistic techique. Workshop “Effects of Playing onEarly and Modern Musical Instruments”, COST Action FP1302 – WOOD MUSICK,London, Royal College of Music, UK, 9-10 September, 2015.

. J. Xavier, Heterogeneous bending tests for the characterisation of wooden plates. Short-Term Scientific Mission (STSM) supported by COST Action FP1302 “WOOD MU-SICK - WOODen MUSical Instrument Conservation and Knowledge”. Host: FabricePierron, University of Southampton, Southampton, UK, 22-27 June, 2015.

. Xavier, J.; Majano-Majano, A.; Fernandez-Cabo, J. Identifiability of stiffness compo-nents of clear wood from a single off-axes compression test. COST Action FP1004,LNEC, Lisbon, Portugal, 15-17 April, 2015.

2014: . 6th Summer School on “Biomechanics: Trends in Modeling and Simulation”, GrazUniversity of Technology, Austria September 8-12, 2014. m

Curriculum vitæ of J. Xavier z July 16, 20159/29

. Xavier, J. Heterogeneous bending tests for the characterisation of wooden plates.Workshop “WOOD MUSICK - WOODen MUSical Instrument Conservation andKnowledge”, COST Action FP1302, Paris, France, 27-28 February, 2014.

. Monteiro, N.; Xavier, J.; Morais, J.J.L.; Dourado, N.; de Moura, M.F.S.F. Moisturecontent effects on the fracture characterisation of P. pinaster under mode I. Workshop“Thermo-hydro-Mechanical (THM) behaviour of wood”, COST Action FP0904,Bordeaux, France, 13-14 February, 2014.

. Training School on “Thermo-hydro-Mechanical (THM) behaviour of wood”, COSTAction FP0904, Bordeaux, France, 10-13 fèvrier, 2014.

2013: . Xavier, J. Identification of stiffness components of recycled MDF panels from full-fieldcurvature measurements. Workshop “Bio-based material characterisation fromfull-field measurements”, UTAD, Vila Real, 9 July, 2013.

. Parcipação no seminário “Casas de Madeira”, LNEC, Lisboa, 17 Abril.

. Xavier, J. Assessing quality of wood and wood products by inverse identification meth-ods based on full-field measurements. COST Young Researchers’ Forum at theFTP-c8 Conference - ’Young Researchers Direct the Way to Innovation in theForest-Based Sector’, Barcelona, Spain, 11-13 March, 2013. (Poster Invitation – Atotal of 180 proposals were received by the Committee and evaluated by a panel of 5Experts, who have selected 20 proposals to be presented orally and 56 proposals to bepresented as posters).

. J. Xavier, research visiting at Lehrstuhl für Carbon Composites in the Technische Uni-versität München, 3-9 March, 2013. Seminar on material parameter characterisationfrom full-field measurements, 6 March.

2012: . Xavier, J. Characterisation of the bending stiffness components of MDF panels fromfull-field slope measurements. Seminário: trabalhos de investigação, CITAB/UTAD,Vila Real, 5 Dezembro, 2012.

. Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. Assessing local properties of woodwithin the stem from full-field measurements. COST Action FP0802 “Micro Char-acterisation of Wood Material & Properties”, Edinburgh, UK, 24-26 October, 2012.

. J. Xavier, Characterisation of local properties of wood at the meso scale by couplingfull-field measurement with an inverse identification method. Short-Term ScientificMission (STSM) supported by COST Action FP0802 “Experimental and computationalmicro-characterisation techniques in wood mechanics”. Host: Stéphane Avril, EcoleNationale Supérieure des Mines, Center for Health Engineering, St-Etienne, France,12-21 September, 2012.

. J. Xavier, Determining stiffness components of wood from 3D measurements. Short-Term Scientific Mission (STSM) supported by COST Action FP1004 “Enhance me-chanical properties of timber, engineered wood products and timber structures”. Host:José Fernandez-Cabo, Polytechnic University of Madrid, Madrid, Spain, 24 June-1 July,2012.

Curriculum vitæ of J. Xavier z July 16, 201510/29

. Xavier, J. Wood and wood products characterisation from full-field measurements.COST Action FP1004 “Enhance mechanical properties of timber, engineeredwood products and timber structures”, Zagreb, Croatia, 19-20 April, 2012.

2011: . Curso teórico-prático “Introdução aos métodos sem malha - interpoladores radiais pon-tuais”, X Congresso Ibero-Americano em Engenharia Mecânica, Porto, Portugal, 3September, 2011.

. Curso teórico-prático “Análise de modelos de elementos finitos construídos a partirde imagens médicas”, X Congresso Ibero-Americano em Engenharia Mecânica, Porto,Portugal, 2 September, 2011.

. CNRS Summer school “Identification procedures using full-field measurements: Appli-cations in mechanics of materials and structures”, LMT - ENS de Cachan, Cachan,June 27-July 1, 2011. m

. Pereira, J.L.; Xavier, J.; Couto, P.; Morais, J.; Lousada, J. and Melo-Pinto, P. On thevariability of transverse elastic properties of P. pinaster at the cellular level. COSTAction FP0802 “Mixed numerical and experimental methods applied to themechanical characterization of bio-based materials”, UTAD, Vila Real, Portugal,27-28 April, 2011.

. Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.L.; Melo-Pinto, P. Highspatial resolution measurement of wood density using hyperspectral imaging and neuralnetworks. COST Action FP0802 “Mixed numerical and experimental methodsapplied to the mechanical characterization of bio-based materials”, UTAD, VilaReal, Portugal, 27-28 April, 2011.

2010: . Training School on “Experimental techniques”, COST Action FP0802, Max-Planck-Institute of Colloids and Interfaces, Department of Biomaterials, Potsdam, Germany,31 May-4 June, 2010. m

. MRA Instrumentação (LIMESS, Automation Technology, TSC and 01dB): Novas Téc-nicas de Ensaios de Materiais, Porto, 27 January, 2010.

. Xavier, J. Identification of mechanical properties of wood and wood products from platebending tests. Workshop de mecânica da madeira, UTAD, Vila Real, 22 Julho 2010.

. Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. On the characterisation of wood atthe growth ring scale. COST Actions IE0601 and FP0802 “Modeling mechanicalbehavior of wooden cultural objects”, Polish Academy of Sciences, Krakow, Poland,12-13 April, 2010.

. Xavier, J. Full-field measurements on the mechanical characterisation of biological ma-terials. Workshop de mecânica da madeira, UTAD, Vila Real, 29 Janeiro, 2010.

2009: . Xavier, J.; Pereira, J.L.; Morais, J.; Pierron, F.; Lousada, J. On the estimation of elasticproperties of wood at the growth ring scale. COST Action FP0802 “Experimentaland Computational Micro-Characterization Techniques in Wood Mechanics”,Vienna University of Technology, Vienna, Austria, 11-13 May, 2009.

Curriculum vitæ of J. Xavier z July 16, 201511/29

. Training School on “Experimental and computational micro-characterisation techniquesin wood mechanics”, COST Action FP0802, Vienna University of Technology, Vienna,Austria, 7-10 May, 2009. m

2005: . COST Action E35, Rosenheim Workshop, 29-30 September, 2005.. Xavier, J.; Avril, S.; Pierron, F.; Morais, J.; Marinescu, M. Identification des rigidités

du bois sur le plan LR par la méthode des champs virtuels : analyse des effets dusà l’hétérogénéité des cernes de croissance. Journées de printemps du PPF “Élab-oration et caractérisation de structures composites minces et épaisses”, CERENSAM de Bordeaux, 18-19 mai, 2005.

2004: . Atelier thématique photomécanique: Mesures optiques de champs en mécanique expéri-mentale des matériaux et des structures. Pôle Optique et Vision, Saint-Étienne, 6-12juillet, 2004. m

. Photoméchanique’04, Ecole des Mines d’Albi–Carmaux, 4-6 Mai, 2004. m

. Cours de professionnalisation de l’Ecole Doctorale Arts et Métiers ParisTech: Innovationet management de projets industriels. CER Paris, 15-19 Mars, 2004.

. Cours scientifique de l’Ecole Doctorale Arts et Métiers ParisTech: Relations entre lespropriétés à l’échelle microscopique et macroscopique des milieux hétérogènes. CERParis, 9-12 Février, 2004.

2003: . Xavier, J. Characterization of the shear behaviour of wood using the Iosipescu test.Seminaire, LMPF, Arts et Métiers ParisTech, 11 de Dezembro, 2003.

. Advanced School and Workshop on Modeling and Numerical Simulation in ContinuumMechanics. University of Coimbra, Portugal, 14-18 July, 2003. m

2002: . Identification des propriétés mécaniques de matériaux et de structures à partir demesures de champs. Journée Scientifique AFM, Université Blaise Pascal, Clermont-Ferrand, 19 Avril, 2002.

2001: . Xavier, J.; Oliveira, J.; Morais, J.; Nóvoa, P.; Lousada, J.; Marques, A. Aplicaçãodo princípio de sobreposição frequência-temperatura à madeira de P. pinaster Ait. IIIJornadas do ICETA, UTAD, Novembro, 2001.

. Oliveira, J.; Xavier, J.; Morais, J.; Nóvoa, P.; Lousada, J.; Marques, A. Caracterizaçãoda transição vítrea da madeira de P. pinaster Ait. III Jornadas do ICETA, UTAD,Novembro, 2001.

. Xavier, J.; Oliveira, J.; Morais, J. Simulação numérica do ensaio de Iosipescu aplicadoà madeira de Pinus loblolly. III Jornadas do ICETA, UTAD, Novembro, 2001.

. Oliveira, J.; Xavier, J.; Morais, J.; Rouboa, A. Simulação numérica do ensaio de Arcanaplicado à madeira de Pinus taeda L. III Jornadas do ICETA, UTAD, Novembro, 2001.

. Garrido, N., Xavier, J.; Morais, J. Simulação computacional do ensaio de “off–axis”aplicado à madeira de Pinus Loblolly. III Jornadas do ICETA, UTAD, Novembro,2001.

Curriculum vitæ of J. Xavier z July 16, 201512/29

. Pereira, J.L.; Garrido, N.; Xavier, J.; Morais, J. Simulação por elementos finitos doensaio de tracção perpendicular às fibras da madeira de pinho loblolly. III Jornadas doICETA, UTAD, Novembro, 2001.

Research Interests– Mechanical characterisation of biological tissues and structures.– Full-field optical methods in experimental mechanics (digital image correlation, grid

method, defletometry, feature tracking method, ESPI).– Mechanical and fracture identification methods (virtual fields method, anisotropic-based

method, compliance-based beam method).– Material characterisation at high strain rate loading based on full-field measurements.

AffiliationIntegrated CITAB/UTAD. m

Collaborator LAETA/INEGI (Laboratório associado). mCollaborator ISISI/University of Minho. m

List of publicationsChapter of books

[4] Guedes, R.; Xavier, J. Understanding and predicting stiffness in advanced fibre-reinforced polymer (FRP) composites for structural applications. In J. Bai (Ed.), Ad-vanced fibre-reinforced polymer (FRP) composites for structural applications, 2013.ISBN: 0 85709 418 1. m

[3] Xavier, J.; Lopes, H.; Pierron, F. Evaluating stiffness components from full-field slopemeasurements provided by deflectometry: phase-unwrapping analyses. In Dirckx J.and Buytaert J. (Eds.), Optical Measurement Techniques for Systems and Structures,Shaker Publishing B.V., pp. 489-499, 2013. ISBN: 978-90-423-0419-2. (Bookproceedings) m

[2] Pereira, J.; de Jesus, A.M.P.; Xavier, J. Characterisation of steel components undermonotonic loading by means of image-based methods. In Dirckx J. and Buytaert J.(Eds.), Optical Measurement Techniques for Systems and Structures, Shaker PublishingB.V., pp.319-329, 2013. ISBN: 978-90-423-0419-2. (Book proceedings)

[1] Dourado, N.; Xavier, J.; Morais, J. On the identification of linear elastic mechanicalbehaviour of orthotropic materials using evolutionary algorithms. In Burczynski T. andOsyczka A. (Eds.), IUTAM Symposium on Evolutionary Methods in Mechanics (SolidMechanics and Its Applications Vol. 117), Springer Netherlands, 251-264, 2004. ISBN1-4020-2266-2. (Book proceedings) m

Articles on international journals(h–index = 13(9) cited by 481(281) total(independent) documents after ThomsonReuters Web of Knowledge, Scopus and Google Schoolar – Quartil ISI JCR)

2015 (6)

Curriculum vitæ of J. Xavier z July 16, 201513/29

[39] Fernandez-Cabo, J.; Arce Blanco, M.; Diez Barra, R.; Widmann, R.; Crocetti, R.;Xavier, J.; Majano-Majano, A.Wire-frame analysis models of a historical planked timberarch. Structures and buildings (accepted for publication).

[38] Garzón-Roca, J.; Sena-Cruz, J.M.; Fernandes, P.; Xavier, J. Effect of wet-dry cycleson the bond behaviour of concrete elements strengthened with NSM CFRP laminatestrips. Composite Structures 132: 331–340, 2015. m(DOI:10.1016/j.compstruct.2015.05.053 | quartile category: Q1; category name: me-chanics | journal impact factor in 2013: 3.120 | citations: 0 total/0 independent)

[37] Catalanotti, C.; Xavier, J. Measurement of the mode II intralaminar fracture toughnessand R-curve of polymer composites using a modified Iosipescu specimen and the sizeeffect law. Engineering Fracture Mechanics 138: 202–214, 2015. m(DOI:10.1016/j.engfracmech.2015.03.005 | quartile category: Q1; category name: me-chanics | journal impact factor in 2013: 1.662 | citations: 0 total/0 independent)

[36] Ghiassi, B.; Xavier, J.; Oliveira, D.V.; Kwiecien, A.; Lourenço, P.B.; Zajac, B. Evalu-ation of the bond performance in FRP-brick components repaired after delamination.Composite Structures 123:271-281, 2015. m(DOI:10.1016/j.compstruct.2014.12.047 | quartile category: Q1; category name: ma-terials science, composites | journal impact factor in 2013: 3.120 | citations: 1 total/1independent)

[35] Koerber, H.; Xavier, J.; Camanho, P.P.; Essa, Y.E.; Martín de la Escalera, F. Highstrain rate behaviour of unidirectional and textile composites under compression andcombined compression-shear loading. International Journal of Solids and Structures54:172–182, 2015. m(DOI:10.1016/j.ijsolstr.2014.10.018 | quartile category: Q1; category name: mechanics| journal impact factor in 2013: 2.035 | citations: 0 total/0 independent)

[34] Xavier, J.; Fernandes, J.R.A.; Frazão, O.; Morais, J.J.L. Measuring mode I cohesive lawof wood bonded joints by combining digital image correlation and fibre Bragg gratingsensors. Composite Structures 121:83-89, 2015. m(DOI:10.1016/j.compstruct.2014.11.017 | quartile category: Q1; category name: ma-terials science, composites | journal impact factor in 2013: 3.120 | citations: 2 total/0independent)

2014 (10)[33] Xavier, J.; Oliveira, M.; Morais, J.; de Moura, M.F.S.F. Determining mode II cohesive

law of Pinus pinaster by combining the end-notched flexure test with digital imagecorrelation. Construction and Building Materials 71:109–115, 2014. m(DOI:10.1016/j.conbuildmat.2014.08.021 | WOS:000345475300011 | quartile category:Q1; category name: construction & building technology; engineering, civil; materialsscience, multidisciplinary | journal impact factor in 2013: 2.265 | citations: 1 total/0independent)

[32] Xavier, J.; Monteiro P.; Morais, J.; Dourado, N.; de Moura, M.F.S.F. Moisture contenteffects on the fracture characterisation of Pinus pinaster under mode I. Journal ofMaterials Science 49(21):7371-7381, 2014. m(DOI:10.1007/s10853-014-8375-0 | WOS:000340679000004 | quartile category: Q1;category name: materials science, multidisciplinary | journal impact factor in 2013:2.305 | citations: 2 total/0 independent)

Curriculum vitæ of J. Xavier z July 16, 201514/29

[31] Subramani; P.; Rana, S.; Oliveira, D.V.; Fangueiro, R.; Xavier, J. Development of novelauxetic structures based on braided composites. Material & Design 61: 286–295,2014. m(DOI:10.1016/j.matdes.2014.04.067 | WOS:000337854100036 | quartile category: Q1;category name: materials science, multidisciplinary | journal impact factor in 2013:3.171 | citations: 2 total/2 independent)

[30] Arteiro, A.; Catalanotti, C.; Xavier, J.; Camanho, P.P. Large damage capability of non-crimp fabric thin-ply laminates. Composites Part A: Applied Science and Manu-facturing 63: 110–122, 2014. m(DOI:10.1016/j.compositesa.2014.04.002 | WOS:000337878300014 | quartile category:Q1; category name: engineering, manufacturing; materials science, composites | journalimpact factor in 2013: 3.012 | citations: 2 total/1 independent)

[29] Xavier, J.; Oliveira, J.; Monteiro, P.; Morais, J.J.L.; de Moura, M.F.S.F. Direct evalu-ation of cohesive law in mode I of Pinus pinaster by digital image correlation. Experi-mental Mechanics 54(5): 829-840, 2014. m(DOI:10.1007/s11340-013-9838-y | WOS:000335762100011 | quartile category: Q1;category name: materials science, characterization & testing | journal impact factor in2013: 1.567 | citations: 7 total/0 independent)

[28] Silva, F.; Morais, J.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; de Moura, M.F.S.F.Determination of cohesive laws in wood bonded joints under mode II loading using theENF test. International Journal of Adhesion and Adhesives 51: 54–61, 2014. m(DOI:10.1016/j.ijadhadh.2014.02.007 | WOS:000336011100006 | quartile category: Q2;category name: engineering, chemical; materials science, multidisciplinary | journalimpact factor in 2013: 2.216 | citations: 5 total/1 independent)

[27] Pereira, J.C.R.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A. Ultra low-cycle fatigue be-haviour of a structural steel. Engineering Structures 60: 214–222, 2014. m(DOI:10.1016/j.engstruct.2013.12.039 | WOS:000333783400022 | quartile category:Q1; category name: engineering, civil | journal impact factor in 2013: 1.767 | cita-tions: 2 total/1 independent)

[26] Pereira, J.; Xavier, J.; Morais, J.; Lousada, J. Assessing wood quality by spatial vari-ation of elastic properties within the stem: case study of P. pinaster in the transverseplane. Canadian Journal of Forest Research, 44(2): 107-117, 2014. m(DOI:10.1139/cjfr-2013-0207 | WOS:000331090300002 | quartile category: Q1; cate-gory name: forestry; ecology | journal impact factor in 2013: 1.071 | citations: 3 total/1independent)

[25] Catalanotti, C.; Xavier, J.; Camanho, P.P. Measurement of the compressive crack re-sistance curve of composites using the size effect law. Composites Part A: AppliedScience and Manufacturing, 56: 300-307, 2014. m(DOI:10.1016/j.compositesa.2013.10.017 | WOS:000329264900030 | quartile category:Q1; category name: engineering, manufacturing; materials science, composites | journalimpact factor in 2013: 3.012 | citations: 5 total/3 independent)

Curriculum vitæ of J. Xavier z July 16, 201515/29

[24] Xavier, J.; Pereira, J.C.R.; de Jesus, A.M.P. Characterisation of steel components undermonotonic loading by means of image-based methods. Optics and Lasers in Engi-neering, 53:142–151, 2014. m(DOI:10.1016/j.optlaseng.2013.09.004 | WOS:000326999900019 | quartile category:Q2; category name: optics | journal impact factor in 2013: 1.695 | citations: 4 to-tal/1 independent)

2013 (10)[23] Silva, F.; Xavier, J.; Pereira, F.A.M.; Morais, J.; Dourado, N.; de Moura, M.F.S.F.

Determination of cohesive laws in wood bonded joints under mode I loading using theDCB test. Holzforschung 67(8): 913-922, 2013. m(DOI:10.1515/hf-2013-0012 | WOS:000330224300011 | quartile category: Q1; categoryname: Materials science, Paper & Wood; Forestry | journal impact factor in 2013: 2.339| citations: 9 total/2 independent)

[22] Arteiro, A.; Catalanotti, C.; Xavier, J.; Camanho, P.P. Notched response of non-crimpfabric thin-ply laminates: analysis methods. Composites Science and Technology,88: 165-171, 2013. m(DOI:10.1016/j.compscitech.2013.09.003 | WOS:000326913500023 | quartile category:Q1; category name: materials science, composites | journal impact factor in 2013: 3.633| citations: 4 total/3 independent)

[21] Dias, G.F.; de Moura, M.F.S.F.; Chousal, J.A.G.; Xavier, J. Cohesive laws of compositebonded joints under mode I loading. Composite Structures 106: 646–652, 2013. m(DOI:10.1016/j.compstruct.2013.07.027 | WOS:000325447700059 | quartile category:Q1; category name: Materials science, Composites | journal impact factor in 2013:3.120 | citations: 10 total/6 independent)

[20] Ghiassi, B.; Xavier, J.; Oliveira, D.; Lourenço, P. Application of digital image correlationin investigating the bond between FRP and masonry. Composite Structures 106: 340-349, 2013. m(DOI:10.1016/j.compstruct.2013.06.024 | WOS:000325447700032 | quartile category:Q1; category name: Materials science, Composites | journal impact factor in 2013:3.120 | citations: 17 total/12 independent)

[19] Fernandes, R.M.R.P.; Chousal, J.A.G.; de Moura, M.F.S.F.; Xavier, J. Determinationof cohesive laws of composite bonded joints under mode II loading. Composites PartB: Engineering 52: 269–274, 2013. m(DOI:10.1016/j.compositesb.2013.04.007 | WOS:000321722500033 | quartile category:Q1; category name: engineering, multidisciplinary; materials science, composites | jour-nal impact factor in 2013: 2.602 | citations: 10 total/5 independent)

[18] Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.L.; Melo-Pinto, P. Compar-ison between neural networks and partial least squares for intra growth ring wood densitymeasurement with hyperspectral imaging. Computers and Electronics in Agriculture94: 71-81, 2013. m(DOI:10.1016/j.compag.2013.03.010 | WOS:000319641000008 | quartile category: Q1;category name: agriculture, multidisciplinary | journal impact factor in 2013: 1.486 |citations: 2 total/2 independent)

Curriculum vitæ of J. Xavier z July 16, 201516/29

[17] Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P. Notched response of non-crimpfabric thin-ply laminates. Composites Science and Technology 79: 97-114, 2013. m(DOI:10.1016/j.compscitech.2013.02.001 | WOS:000318377900014 | quartile category:Q1; category name: materials science, composites | journal impact factor in 2013: 3.633| citations: 14 total/11 independent)

[16] Xavier, J.; Belini, U.; Pierron, F.; Morais, J.; Lousada, J.; Tomazello, M. Characterisa-tion of bending stiffness components of MDF panels from full-field slope measurements.Wood Science and Technology 47(2): 423-441, 2013. m(DOI:10.1007/s00226-012-0507-6 | WOS:000314981900015 | quartile category: Q1;category name: Forestry; Materials science, Paper & Wood | journal impact factor in2013: 1.873 | citations: 9 total/5 independent)

[15] Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.L.; Melo-Pinto, P. Mea-surement of intra-ring wood density by means of imaging VIS/NIR spectroscopy (hy-perspectral imaging). Holzforschung 67(1): 59-65, 2013. m(DOI:10.1515/hf-2011-0258 | WOS:000313520100009 | quartile category: Q1; categoryname: Materials science, Paper & Wood; Forestry | journal impact factor in 2013: 2.339| citations: 5 total/5 independent)

[14] Ercin, G.H.; Camanho, P.P.; Xavier, J.; Catalanotti, G.; Mahdi, S.; Linde, P. Size effectson the tensile and compressive failure of notched composite laminates. CompositeStructures 96: 736–744, 2013. m(DOI:10.1016/j.compstruct.2012.10.004 | WOS:000313776900073 | quartile category:Q1; category name: Materials science, Composites | journal impact factor in 2013:3.120 | citations: 13 total/9 independent)

2012 (2)[13] Xavier, J.; Sousa, A.M.R.; Morais, J.J.L.; Filipe, V.M.J.; Vaz, M. Measuring displace-

ment fields by cross-correlation and a differential technique: experimental validation.Optical Engineering 51, 043602, 2012. m(DOI:10.1117/1.OE.51.4.043602 | WOS:000304015100016 | quartile category: Q1; cat-egory name: optics | journal impact factor in 2012: 0.880 | citations: 15 total/4 inde-pendent)

[12] Xavier, J.; de Jesus, A.M.P.; Morais, J.J.L.; Pinto, J.M.T. Stereovision measurementson evaluating the modulus of elasticity of wood by compression tests parallel to thegrain. Construction and Building Materials 26(1): 207–215, 2012. m(DOI:10.1016/j.conbuildmat.2011.06.012 | WOS:000295754200025 | quartile category:Q1; category name: construction & building technology; engineering, civil; materialsscience, multidisciplinary | journal impact factor in 2012: 2.293 | citations: 41 total/14independent)

2011 (3)[11] Sousa, A.M.R.; Xavier, J.; Vaz, M.; Morais, J.J.L.; Filipe, V.M.J. Cross-correlation and

differential technique combination to determine displacement fields. Strain 47(SUPPL.2): 87-98, 2011. m(DOI:10.1111/j.1475-1305.2010.00740.x | WOS:000298481800009 | quartile category:Q3; category name: materials science, characterization & testing | journal impact factorin 2011: 1.103 | citations: 22 total/6 independent)

Curriculum vitæ of J. Xavier z July 16, 201517/29

[10] Xavier, J.; Morais, J.; Dourado, N.; de Moura, M.F.S.F. Measurement of mode I andmode II fracture properties of wood-bonded joints. Journal of Adhesion Science andTechnology 25(20): 2881–2895, 2011. m(DOI:10.1163/016942411X576563 | WOS:000297483300009 | quartile category: Q3;category name: engineering, chemical; materials science, multidisciplinary; mechanics |journal impact factor in 2011: 0.948 | citations: 6 total/2 independent)

[9] Sousa, A.M.R.; Xavier, J.; Morais, J.J.L.; Filipe, V.M.J.; Vaz, M. Processing discontin-uous displacement fields by a spatio-temporal derivative technique. Optics and Lasersin Engineering 49(12): 1402-1412, 2011. m(DOI:10.1016/j.optlaseng.2011.07.007 | WOS:000295150800005 | quartile category:Q2; category name: optics | journal impact factor in 2011: 1.838 | citations: 22 total/6independent)

2010 (4)[8] Koerber, H.; Xavier, J.; Camanho, P.P. High strain rate characterisation of unidirec-

tional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digitalimage correlation. Mechanics of Materials 42(11): 1004-1019, 2010. m(DOI:10.1016/j.mechmat.2010.09.003 | WOS:000284660200004 | quartile category:Q1; category name: mechanics | journal impact factor in 2010: 1.911 | citations: 53total/48 independent)(This has been the most cited article in Mechanics of Materials published since 2010;extracted from Scopus in January 2015 .)

[7] Catalanotti, G.; Camanho, P.P.; Xavier, J.; Dávila, C.G.; Marques, A.T. Measurementof resistance curves in the longitudinal failure of composites using digital image corre-lation. Composites Science and Technology 70(13): 1986-1993, 2010. m(DOI:10.1016/j.compscitech.2010.07.022 | WOS:000283611000029 | quartile category:Q1; category name: materials science, composites | journal impact factor in 2010: 2.863| citations: 37 total/27 independent)

[6] Morais, J.J.L.; de Moura, M.F.S.F.; Pereira, F.A.M.; Xavier, J.; Dourado, N.; Dias,I.R.; Azevedo, J.M.T. The double cantilever beam test applied to mode I fracturecharacterization of cortical bone tissue. Journal of the Mechanical Behavior ofBiomedical Materials, 3(6): 446-453, 2010. m(DOI:10.1016/j.jmbbm.2010.04.001 | WOS:000280499100004 | quartile category: Q2;category name: engineering, biomedical; materials science, biomaterials | journal impactfactor in 2010: 3.297 | citations: 26 total/20 independent)

[5] de Moura, M.F.S.F.; Oliveira, J.M.Q.; Morais, J.J.L.; Xavier, J. Mixed-mode I/II woodfracture characterization using the mixed-mode bending test. Engineering FractureMechanics,77(1): 144-152, 2010. m(DOI:10.1016/j.engfracmech.2009.09.014 | WOS:000274559100010 | quartile category:Q2; category name: mechanics | journal impact factor in 2010: 1.576 | citations: 7total/6 independent)

2009 (2)

Curriculum vitæ of J. Xavier z July 16, 201518/29

[4] Xavier, J.; Avril; S.; Pierron, F.; Morais, J. Variation of transverse and shear stiffnessproperties of wood in a tree. Composites Part A: Applied Science and Manufac-turing, 40(12): 1953-1960, 2009. m(DOI:10.1016/j.compositesa.2009.09.023 | WOS:000272861000016 | quartile category:Q1; category name: engineering, manufacturing; materials science, composites | journalimpact factor in 2009: 2.410 | citations: 17 total/8 independent)

[3] Xavier, J.; Oliveira, M.; Morais, J.; Pinto, J. Measurement of the shear properties ofclear wood by the Arcan test. Holzforschung, 63(2): 217–225, 2009. m(DOI:10.1515/HF.2009.034 | WOS:000263932200013 | quartile category: Q1; categoryname: Materials science, Paper & Wood; Forestry | journal impact factor in 2009: 1.236| citations: 14 total/7 independent)

2007 (1)[2] Xavier, J.; Avril; S.; Pierron, F.; Morais, J. Novel experimental approach for

longitudinal-radial stiffness characterisation of clear wood by a single test. Holz-forschung, 61(5): 573-581, 2007. m(DOI:10.1515/HF.2007.083 | WOS:000249326500018 | quartile category: Q1; categoryname: Materials science, Paper & Wood; Forestry | journal impact factor in 2007: 0.811| citations: 30 total/14 independent)

2004 (1)[1] Xavier, J.C.; Garrido, N.M.; Oliveira, M.; Morais, J.L.; Camanho, P.P.; Pierron, F. A

comparison between the Iosipescu and off-axis shear test methods for the shear charac-terization of Pinus pinaster Ait. Composites Part A: Applied Science and Manu-facturing, 35(7-8): 827-840, 2004. m(DOI:doi:10.1016/j.compositesa.2004.01.013 | WOS:000221904600008 | quartile cate-gory: Q1; category name: engineering, manufacturing; materials science, composites |journal impact factor in 2007: 1.662 | citations: 63 total/49 independent)

Articles on national journals2015 (2)

[8] Xavier, J.; Fernandes, J.R.A.; Morais, J.J.L.; Frazão, O. Fracture behaviour of woodbonded joints under modes I and II by digital image correlation and fibre Bragg gratingsensors. Ciência e Tecnologia dos Materiais, Special Issue PCF 2014 (current status:accepeted with minor revisions, 06/2015). m

[7] Xavier, J.; Oliveira, M.; Morais, J.J.L.; de Moura, M.F.S.F. Determining mode I cohe-sive law of Pinus pinaster by coupling double cantilever beam test with digital imagecorrelation. Frattura ed Integrità Strutturale/Fracture and Structural Integrity31:13-22, 2015. m

2012 (3)[6] Sousa, A.M.R.; Xavier, J.; Vaz, M.; Morais, J.J.L.; Filipe, V.M.J. Measurement of

displacement fields with sub-pixel accuracy by combining cross-correlation and opticalflow. Mecânica Experimental, 21:101-109, 2012.

[5] Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J.; Pierron, F. On the evaluation of elasticproperties of P. pinaster at the growth ring scale. Mecânica Experimental, 20:51-58,2012.

Curriculum vitæ of J. Xavier z July 16, 201519/29

[4] Xavier, J.; de Jesus, A.M.P.; Morais, J.; Pinto, J. On the determination of the modulusof elasticity of wood by compression tests parallel to the grain. Mecânica Experimen-tal, 20:59-66, 2012.

2008 (1)[3] Xavier, J.; Avril, S.; Pierron, F.; Morais, J. Characterisation of the radial variability of

stiffness parameters of P. pinaster by the virtual fields method. Mecânica Experimen-tal, 16:89-98, 2008. m

2007 (1)[2] Xavier, J.; Garrido, N.; Morais, J.; Pinto, J.; Camanho, P.P. Estudo numérico e exper-

imental do método do vão variável para a identificação das propriedades elásticas damadeira. Mecânica Experimental, 14:59-65, 2007 (Prize Eng.o Cruz Azevedo). m

2001 (1)[1] Xavier, J.; Dourado, N.; Morais, J.; Conceição António, C. Identification of elastic prop-

erties of orthotropic materials using evolutionary algorithms. Mecânica Experimental,6: 45-56, 2001. m

Articles on international congresses2015 (7)

[54] de Moura, M.F.S.F.; Silva, F.G.A.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; Morais,J.J.L.; Dias, M.I.R.; Lourenço, P.J.; Judas, F.M. Determination of mode I fracturetoughness of cortical human bone using the DCB test. 6th International Confer-ence on Mechanics and Materials in Design - M2D’2015, Ponta delgada, Açores,Portugal, 26-30 July, 2015. (oral presentation) m

[53] Pinto, V.C.; Xavier, J.; Gonçalves, C.; Magalhães, F.D.; Guedes, R.M. Hydrolytic degra-dation rates for molecular weight and tensile strength of PLA/GNP and PLA/CNT-COOH in PBS medium. 6th International Conference on Mechanics and Materialsin Design - M2D’2015, Ponta delgada, Açores, Portugal, 26-30 July, 2015. (submit-ted) (oral presentation)

[52] Dourado, N.; de Moura, M.F.S.F.; de Jesus, A.; Xavier, J. Numerical and experimentalcharacterization of steel-wood doweled joints under quasi-static loading. 6th Interna-tional Conference on Mechanics and Materials in Design - M2D’2015, Pontadelgada, Açores, Portugal, 26-30 July, 2015. (submitted) (oral presentation)

[51] Cantalonotti, G.; Xavier, J.; Camanho, P.P. Fracture toughness and crack resistancecurves in the longitudinal compressive failure of polymer composites 6th InternationalConference on Mechanics and Materials in Design - M2D’2015, Ponta delgada,Açores, Portugal, 26-30 July, 2015. (submitted) (oral presentation)

[50] Xavier, J.; Lopes, H.; Pierron, F.; Morais, J.; Vaz M. Measuring orthotropic stiffnesscomponents of wood by plate bending tests. Photomechanics15, Delf, Netherlands,26-29 May, 2015. (oral publication) m

[49] Rana, S.; Parveen, S.; Fangueiro, R.; Paiva, M.C.; Xavier, J. Development of DuctileCementitious Composites Using Carbon Nanotubes. Nanoscience and Nanotech-nology International Conference - NanoPT2015, Porto, Portugal, 11-13 February,2015. (oral publication) m

Curriculum vitæ of J. Xavier z July 16, 201520/29

[48] Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho P.P. A Finite Fracture Mechanicsmodel for the prediction of the notched response and large damage capability of compos-ite laminates. 13th International Conference on Fracture and Damage Mechanics,São Miguel Island, Azores, Portugal, September 23-25, 2014. (oral presentation)Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P. A Finite Fracture Mechanicsmodel for the prediction of the notched response and large damage capability of com-posite laminates. Key Engineering Materials – Advances in Fracture and DamageMechanics XIII 627:13-16, 2015. m(DOI:10.4028/www.scientific.net/KEM.627.13 | citations: 0 total/0 independent)

2014 (8)[47] Cruz, W. Xavier, J.; Pierron, F.; Morais, J. Characterization of orthotropic stiffness

components of Pinus pinaster from heterogeneous plate bending tests. II InternationalConference of the International Journal of Structural Integrity, 1-4 September,Funchal, Portugal, 2014. (oral presentation)

[46] Silva A.L.L.; Xavier, J.; Carvalho, D.; Jesus, A.M.P.; Fernandes, A.A. Evaluation ofmixed-mode I+II fatigue crack propagation in steels assisted by DIC. II InternationalConference of the International Journal of Structural Integrity, 1-4 September,Funchal, Portugal, 2014. (oral presentation)

[45] Pereira, J.C.R.; de Jesus, A.M.P.; Fernandes, A.A.; Xavier, J. ULCF and cyclic elasto-plastic behaviour of linepipe steel grades. 11th World Congress on ComputationalMechanics (WCCM XI), 5th European Conference on Computational Mechanics(ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFDVI) Barcelona, Spain, July 20-25, 2014. (oral presentation)

[44] Pereira, J.C.R.; de Jesus, A.M.P.; Coppola, T.; Fernandes, A.A.; Iob, F.; Campanelli, F.;Xavier, J. Monotonic and ULCF behaviour of pipeline steels and components. modelsidentification and aplications. 11th World Congress on Computational Mechanics(WCCM XI), 5th European Conference on Computational Mechanics (ECCMV), 6th European Conference on Computational Fluid Dynamics (ECFD VI)Barcelona, Spain, July 20-25, 2014. (oral presentation)

[43] Pereira, J.C.R.; de Jesus, A.M.P.; Fernandes, A.A., Xavier, J.; Martins, B. Comparisonsof Monotonic, Low-Cycle and Ultra-Low-Cycle Fatigue Behaviours of X52, X60 and X65Piping Steel Grades. ASME Pressure Vessels & Piping Conference, Hyatt RegencyOrange County, USA, 20-24 July, 2014. (oral presentation)Pereira, J.C.R., De Jesus, A.M.P., Fernandes, A.A., Xavier, J., Martins, B. Comparisonof the monotonic, low-cycle and ultra-low-cycle fatigue behaviours of the X52, X60 andX65 piping steel grades. Proc. ASME. 46032; Volume 6A: Materials and Fabrication,V06AT06A015.July 20, 2014 PVP2014-28761. (DOI:10.1115/PVP2014-28761) m

[42] Koerber, H.; Xavier, J.; Camanho, P.P.; Sainz de Aja, J.R.; Essa, Y. High strain ratebehaviour of textile composites under compression and combined compression-shearloading. 16th International Conference on Experimental Mechanics - ICEM16,University of Cambridge, UK, 7-11 July, 2014. (oral presentation)

[41] Pinto, V.; Xavier, J.; Guedes, R.M. Experimental creep analysis of biodegradable poly-mer matrix nanocomposites for ACL replacement. 16th European Conference onComposite Materials - ECCM16, Seville, Spain, 22-26 June, 2014. (oral presenta-tion)

Curriculum vitæ of J. Xavier z July 16, 201521/29

[40] Fernandes, R.A.; Passos, D.J.; Xavier, J.; Morais, J.; Frazão, O. Initial studies of gluedwood joints using FBG strain sensors. 3rd Mediterranean Photonics ConferenceTrani, Italy, 7-9 May, 2014. (poster presentation)Fernandes, J.; Passos, D.; Xavier, J.; Morais, J. & Frazao, O. Initialstudies of glued wood joints using FBG strain sensors. Photonics Confer-ence, 2014 Third Mediterranean, MePhoCo 2014 6866495, p. 1-3, 2014.(DOI:10.1109/MePhoCo.2014.6866495) m

2013 (11)[39] Koerber, H.; Xavier, J.; Camanho, P.P.; Sainz de Aja, J.R.; Essa, Y. High strain rate

behaviour of unidirectional and textile composites under compression and combinedcompression-shear loading. High speed imaging for dynamic testing of materialsand structures (21st DYMAT Technical Meeting), Institute of Physics, London,UK, 18-20 November, 2013. (oral presentation) m

[38] Pinto, V.C.; Xavier, J.; Pinto, A.; Magalhães, F.D.; Guedes, R.M. Mechanical study ofbiodegradable nanocomposites for anterior cruciate ligament replacement. 5th Interna-tional Conference on Structural Analysis of Advanced Materials, ICSAAM-2013,Kipriotis Village Resort, Island of Kos, Greece, 23-26 September, 2013. (oral presenta-tion) m

[37] Koerber, H.; Xavier, J.; Camanho, P.P.; Sainz de Aja, J.R.; Essa, Y. High strain ratebehaviour of textile composites under compression and combined compression-shearloading. IV ECCOMAS Thematic Conference on the Mechanical Response ofComposites, University of the Azores, Ponta Delgada, Azores, Portugal, 25-27 Septem-ber, 2013. (oral presentation) m

[36] Catalanotti, G.; Xavier, J.; Camanho, P.P. Fracture toughness and crack resistancecurves in the longitudinal compressive failure of polymer composites. IV ECCOMASThematic Conference on the Mechanical Response of Composites, University ofthe Azores, Ponta Delgada, Azores, Portugal, 25-27 September, 2013. (oral presenta-tion)

[35] Pinto, V.C.; Xavier, J.; Pinto, A.; Magalhães, F.D.; Guedes, R.M. Mechanical analysisof biodegradable nanocomposites for ACL replacement. 25th European Conferenceon Biomaterials, Madrid, Espanha, 2013, 8-12 September, 2013. (poster presentation)m

[34] Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P. Notched response of non-crimpfabric thin-ply laminates. 19th International Conference on Composite Materials(ICCM19), Montreal, Canada, July 28–August 2, 2013. (oral presentation) m

[33] Pinto, V.C.; Xavier, J.; Pinto, A.; Magalhães, F.D.; Guedes, R.M. Biodegradablenanocomposites for ACL replacement medical device; a mechanical study. 19thCongress of the European Society of Biomechanics, University of Patras, Greece,2013, 25-28 August, 2013. (poster presentation) m

[32] Pereira, J.; de Jesus, A.; Xavier, J.; Fernandes, A.A. Characterization of X60 steel gradeunder ultra low cycle fatigue loading. 4th International Conference on Integrity,Reliability and Failure of Mechanical Systems (IRF2013), University of Porto,Funchal, Madeira, Portugal, June 23-27, 2013. (oral presentation) m

Curriculum vitæ of J. Xavier z July 16, 201522/29

[31] Pinto, V.; Xavier, J.; Pinto, A.; Magalhães, F.D.; Guedes, R. A mechanical analysisof biodegradable nanocomposites for ACL replacement medical device. 4th Interna-tional Conference on Integrity, Reliability and Failure of Mechanical Systems(IRF2013), University of Porto, Funchal, Madeira, Portugal, June 23-27, 2013. (oralpresentation)

[30] Dourado, N.; Silva, F.; Xavier, J.; de Moura, M.F.S.F. Determination of the concretecohesive law under mode I loading using an inverse method. 4th International Con-ference on Integrity, Reliability and Failure of Mechanical Systems (IRF2013),University of Porto, Funchal, Madeira, Portugal, June 23-27, 2013. (oral presentation)

[29] Xavier, J.; Belini, U.; Pierron, F.; Morais, J.; Lousada, J.; Tomazello, M. Characterisa-tion of stiffness components of medium density fiberboard panels by heterogeneous platebending tests. 1st International Conference on Natural Fibers: Sustainable Ma-terials for Advanced Applications, University of Minho, Guimarães, Portugal, June9-11, 2013. (oral presentation) m

2012 (13)[28] Majano-Majano, A.; Fernandez-Cabo, J.; Xavier, J. Characterization of clear wood by

a single specimen: evaluation of first results and further improvements. 6th Euro-pean Congress on Computational Methods in Applied Sciences and Engineering(ECCOMAS 2012), Vienna, Austria, 10-14 September, 2012. (oral presentation) m

[27] Mata, H.; Natal Jorge, R.; Parente, M.P.L.; Fernandes, A.A.; Santos, A.D.; Valente,R.A.F.; Xavier, J. Establishment of the mechanical properties of aluminium alloy ofsandwich plates with metal foam core by using an image correlation procedure. 3rdComputational Modeling of Objects Presented in Images: Fundamentals, Meth-ods and Applications (CompIMAGE2012), Rome, Italy, 5-7 September, 2012. (oralpresentation) m

[26] Xavier, J.; Majano-Majano, A.; Fernandez-Cabo, J. Identifiability of stiffness compo-nents of clear wood from a single off-axes compression test. 15th International Con-ference on Experimental Mechanics, Faculty of Engineering, University of Porto,Portugal, 22-27 July, 2012. (oral presentation) m

[25] Ercin, G.H.; Camanho, P.P.; Xavier, J.; Mahdi, S.; Linde, P. Size effects on the tensileand compressive failure of notched composite laminates. 15th International Con-ference on Experimental Mechanics, Faculty of Engineering, University of Porto,Portugal, 22-27 July, 2012. (oral presentation)

[24] Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. Evaluating wood transverse elastic prop-erties at the meso scale by digital image correlation. 15th International Conferenceon Experimental Mechanics, Faculty of Engineering, University of Porto, Portugal,22-27 July, 2012. (oral presentation)

[23] Pereira, J.; de Jesus, A.M.P.; Xavier, J. Modelling monotonic behaviour in steel com-ponents supported by image-based methods. 15th International Conference on Ex-perimental Mechanics, Faculty of Engineering, University of Porto, Portugal, 22-27July, 2012. (oral presentation)

[22] Pereira, J.; de Jesus, A.M.P.; Xavier, J.; Tavares, J. Characterisation of S185 steel undermonotonic loading by a feature tracking method. 15th International Conference onExperimental Mechanics, Faculty of Engineering, University of Porto, Portugal, 22-27July, 2012. (poster presentation)

Curriculum vitæ of J. Xavier z July 16, 201523/29

[21] Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. Assessing quality of wood by spatialvariation of transverse elastic properties of wood within the stem. IUFRO - All-Division5 Conference, Estoril Conference Centre, Lisbon, Portugal, 8-13 July, 2012. (oralpresentation) m

[20] Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.L.; Melo-Pinto, P. In-tra growth ring wood density measurement using hyperspectral imaging and neuralnetworks. IUFRO - All-Division 5 Conference, Estoril Conference Centre, Lisbon,Portugal, 8-13 July, 2012. (poster presentation)

[19] Sena-Cruz, J.; Fernandes, P.; Silva, P.; Xavier, J.; Barros J.; Coelho M. Bond behaviourof concrete elements strengthened with NSM CFRP laminate strips under wet-dry cycles.Bond in Concrete, Brescia, Italy, 17-20 June, 2012. (oral presentation) m

[18] Xavier, J.; Morais, J.; Diaquino, B.; Pereira, F. Characterisation of the shear behaviourof bovine cortical bone by the Arcan test. Euromech Colloquium on “advancedexperimental approaches and inverse problems in tissue biomechanics”, Ecoledes Mines de Saint-Etienne, France, 28-31 May, 2012. (oral presentation) m

[17] Xavier, J.; Lopes, H.; Pierron, F.; Phase unwrapping algorithms on evaluating stiff-ness components from full-field slope measurements provided by deflectometry. 5thInternational Conference on Optical Measurement Techniques for Structuresand Systems – OPTIMESS, University of Antwerp, Belgium, 4-5 April, 2012. (oralpresentation) m

[16] Pereira, J.; de Jesus, A.M.P.; Xavier, J. Characterisation of steel components undermonotonic loading by means of image-based methods. 5th International Conferenceon Optical Measurement Techniques for Structures and Systems – OPTIMESS,University of Antwerp, Belgium, 4-5 April, 2012. (poster presentation)

2011 (3)[15] Koerber, H.; Xavier, J.; Camanho, P.P. High strain rate behavior of unidirectional

carbon-epoxy IM7-8552 material characterization and modeling. 3rd Thematic Confer-ence on Mechanical Response of Composites – ECCOMAS, Hannover, Germany,21-23 September, 2011. (oral presentation) m

[14] Koerber, H.; Xavier, J.; Camanho, P.P. High strain rate characterisation of unidirec-tional carbon-epoxy IM7-8552 in transverse compression and in-plane shear via digitalimage correlation. 5th International Conference on Composites Testing and ModelIdentification, EPFL, Lausanne, Switzerland, 14-16 February, 2011. (oral presentation)m

[13] Sousa, A.; Xavier, J.; Morais, J.; Vaz, M.; Filipe, V. Evaluation of displacement discon-tinuities by digital image correlation and differential techniques. International confer-ence on full-field measurement techniques and their applications in experimentalsolid mechanics (Photomechanics 2011), Vrije Universiteit Brussel, Brussels, Bel-gium, 7-9 February 2011. (oral presentation) m

2010 (3)[12] Körber, H.; Xavier, J.; Camanho, P.P. High strain rate characterisation of unidirectional

carbon-epoxy IM7-8552 in transverse compression and in-plane shear via digital imagecorrelation. 19th DYMAT Technical Meeting, Strasbourg, France, 1-3 December2010. (oral presentation) m

Curriculum vitæ of J. Xavier z July 16, 201524/29

[11] Morais, J.J.L.; Xavier, J.; Dourado, N.M.M.; de Moura, M.F.S.F. Mode I and Mode IIFracture Characterization of Wood Bonded Joints. 4th International Conference onAdvanced Computational Engineering and Experimenting, Paris, France, 8-9 July,2010. (poster presentation) m

[10] Körber, H.; Xavier, J.; Camanho, P.P. High strain rate characterisation of unidirectionalcarbon-epoxy IM7-8552 in compression and in-plane shear via digital image correlation.14th European Conference on Composite Materials, Budapest University of Tech-nology and Economics, Budapest, Hungary, 7-10 June, 2010. (oral presentation) m

2009 (2)[9] Xavier, J.; Custódio, P.; Morais, J.; Guedes, R. Assessing mechanical properties of a

polymer material by a video extensometer technique. 7th EUROMECH Solid Me-chanics Conference, J. Ambrosio et. al. (Eds.), pp. 253-260, IST, Lisbon, Portugal,7-11 September, 2009. (oral presentation) m

[8] Pereira, F.; Xavier, J.; Morais, J.; Braga, P. Characterisation of bovine bone tissue bytensile and three-point bending tests. 3rd International Conference on AdvancedComputational Engineering and Experimenting, Rome, Italy, 22-23 June, 2009.(poster presentation) m

2008 (2)[7] Xavier, J.; Avril, S.; Pierron, F.; Morais, J. Parameter identification by the virtual fields

method: application to the stiffness radial variability of P. pinaster within the stem.4th International Conference on Composites Testing and Model Identification,Dayton, Ohio, USA, 20-22 October, 2008. (oral presentation) m

[6] Xavier, J.; Pinto, J.; de Jesus, A.M.P.; Morais, J. Application of stereovision to woodcompression tests. 1st Conference on 3D-Imaging of Materials and Systems,Carcans-Maubuisson, France, 8-12 Septembre, 2008. (poster presentation) m

2006 (1)[5] Xavier, J.; Avril, S.; Pierron, F.; Morais, J. Application of the Virtual Fields Method to

the characterisation of the anisotropic LR stiffnesses of P. pinaster wood. 4th Interna-tional Conference of the European Society for Wood Mechanics, Florence, Italy,14-17 May, 2006. (oral presentation)

2005 (1)[4] Xavier, J.; Avril, S.; Pierron, F.; Morais, J.; Marinescu, M. Identification of clear wood

orthotropic stiffnesses using full-field measurements. 8th European Mechanics of Ma-terials Conference – Material and structural identification from full-field mea-surements, Cachan, France, 13-15 September, 2005. (oral presentation) m

2003 (1)[3] Xavier, J.; Garrido, N.; Oliveira, J.; Morais, J.; Camanho, P.P.; Pierron, F. A compari-

son of shear characterization of P. pinaster Ait. with the Iosipescu and off-axis shear testmethods. 1st International Conference on Composites Testing and Model Iden-tification, Arts et Métiers ParisTech, Châlons-en-Champagne, France, 28-30 January,2003. (oral presentation)

2002 (1)

Curriculum vitæ of J. Xavier z July 16, 201525/29

[2] Dourado, N.; Xavier, J.; Morais, J. On the identification of mechanical behaviour oforthotropic materials using evolutionary algorithms. IUTAM Symposium on Evo-lutionary Methods in Mechanics, Cracow, Polony, 24-27 September, 2002. (oralpresentation)

2001 (1)[1] Morais, J.; Xavier, J.; Dourado, N.; Lousada, J. Measuring the mechanical behavior of

wood in the orthotropic directions. 1st International Conference of the EuropeanSociety for Wood Mechanics, Parviz Navi (Ed.), pp. 355-363, EPFL, Lausanne,Switzerland, 19-21 April, 2001. (poster presentation)

Articles on national congresses2015 (2)

[34] Carneiro, C.; Neves, N.; Xavier, J.; Vaz, M. Caracterização do comportamento mecânicode uma vértebra lombar; com e sem cimentação. 6o Congresso Nacional deBiomecânica - CNB2015, Monte Real, Leiria, Portugal, 6-7 de fevereiro, 2015. (oralpresentation) m

[33] Pinto, V.C.; Xavier, J.; Gonçalves, C.; Magalhães, F.D.; Guedes, R.M. Degradaçãohidrolítica de nanocompósitos poliméricos de PLA/CNT-COOCH e PLA/GNP parasubstituição de tecidos ligamentares. 6o Congresso Nacional de Biomecânica -CNB2015, Monte Real, Leiria, Portugal, 6-7 de fevereiro, 2015. (oral presentation) m

2014 (8)[32] Pereira, J.C.R.; de Jesus, A.M.P.; Fernandes, A.A.; Xavier, J. ULCF and cyclic elasto-

plastic behaviour of linepipe steel grades. 9◦ Congresso Nacional de Mecânica Ex-perimental, Universidade de Aveiro, Aveiro, 15-17 outubro, 2014. (oral presentation)

[31] Xavier, J.; Oliveira, J.; Monteiro, P.; Morais, J.J.L.; de Moura, M.F.S.F. Direct methodfor determining the cohesive law of Pinus pinaster in mode I by digital image correlation.XIV Portuguese Conference on Fracture - PCF2014, University of Trás-os-Montese Alto Douro, Hotel Douro, Régua, Portugal, 6-7 February, 2014. (oral presentation)m

[30] Xavier, J.; Fernandes, J.R.A.; Frazão, O.; Morais, J.J.L. Experimental evaluation ofmode I cohesive laws of wood bonded joints combining digital image correlation andembedded fiber Bragg grating sensors. XIV Portuguese Conference on Fracture -PCF2014, University of Trás-os-Montes e Alto Douro, Hotel Douro, Régua, Portugal,6-7 February, 2014. (oral presentation)

[29] Arteiro, A.; Catalanotti, C.; Xavier, J.; Camanho, P.P. Large damage capability ofnon-crimp fabric thin-ply laminates. XIV Portuguese Conference on Fracture -PCF2014, University of Trás-os-Montes e Alto Douro, Hotel Douro, Régua, Portugal,6-7 February, 2014. (oral presentation)

[28] Catalanotti, C.; Xavier, J.; Camanho, P.P. Fracture toughness and crack resistancecurves in the longitudinal compressive failure of polymer composites. XIV PortugueseConference on Fracture - PCF2014, University of Trás-os-Montes e Alto Douro,Hotel Douro, Régua, Portugal, 6-7 February, 2014. (oral presentation)

Curriculum vitæ of J. Xavier z July 16, 201526/29

[27] Silva, A.L.L.; Carvalho, D.; de Jesus, A.M.P.; Xavier, J.;, Fernandes, A. Mixed modeI/II fatigue crack propagation. XIV Portuguese Conference on Fracture - PCF2014,University of Trás-os-Montes e Alto Douro, Hotel Douro, Régua, Portugal, 6-7 February,2014. (oral presentation)

[26] Pereira, J.C.R.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A. ULCF fatigue behaviour ofpipeline steels. XIV Portuguese Conference on Fracture - PCF2014, University ofTrás-os-Montes e Alto Douro, Hotel Douro, Régua, Portugal, 6-7 February, 2014. (oralpresentation)

[25] Pereira, J.C.R.; Nunes, R.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A. Characterizationof the ULCF fatigue behaviour of the X52 steel by means of cyclic bending tests. XIVPortuguese Conference on Fracture - PCF2014, University of Trás-os-Montes eAlto Douro, Hotel Douro, Régua, Portugal, 6-7 February, 2014. (oral presentation)

2013 (2)[24] Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. Avaliação da qualidade da madeira de P.

pinaster através da variação espacial das propriedades elásticas perpendiculares ao grão,ao nível do tronco. 7◦ Congresso Florestal Nacional “Florestas - Conhecimento eInovação”, Vila Real/Bragança, Portugal, 5-8 de Junho de 2013. (oral presentation)m

[23] Pinto, V.; Xavier, J.; Pinto, A.; Magalhaes, F.D.; Guedes, R. Estudo mecânico denanocompósitos PLA/GNP e compósitos PLA/biovidro para desenvolvimento de dis-positivo ligamentar 5◦ Congresso Nacional de Biomecânica (CNB2013), Fórum deArte e Cultura de Espinho, Espinho, Portugal, 8-9 Fevereiro 2013. (oral presentation)m

2012 (3)[22] Fernandes, P.; Silva, P.; Sena-Cruz, J.; Xavier, J.; Barros, J.; Coelho, M. Diferentes

métodos de avaliação do comportamento da ligação de laminados de CFRP ao betãode acordo com a técnica NSM. Encontro Nacional Betão Estrutural, FEUP, 24-26October 2012. (oral presentation) m

[21] Belini, U.; Xavier, J.; Lousada, J.; Morais, J.; Tomazello Filho, M. Caracterização domódulo de elasticidade de compósitos de madeira por deflectometria. XIII EncontroBrasileiro em Madeiras e em Estruturas de Madeira, Campus da UFES, Vitoria,Espírito Santo, Brasil, 23-25 July, 2012. (oral presentation) m

[20] Pereira, J.C.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A. Ultra low-cycle fatigue be-haviour of a structural steel. 13th Portuguese Conference in Fracture, Faculty ofScience and Technology, University of Coimbra, Portugal, 2-3 February, 2012. (oralpresentation) m

2011 (2)[19] Xavier, J.; Belini, U.; Moura, J.; Morais, J.; Lousada, J.; Tomazello, M. Characterisation

of MDF panels from full-field measurements. 1◦ Congresso Ibérico-Latino Americanode Madeira na Construção, CIMAD11, Universidade de Coimbra, Coimbra, 7-9 Junho,2011. (oral presentation)

Curriculum vitæ of J. Xavier z July 16, 201527/29

[18] Martins, J.; Xavier, J.; Correia, J.; de Jesus, A.M.P.; Morais, J.; Salavessa, E. Caracter-ização do comportamento mecânico de elementos de madeira recorrendo à técnica decorrelação digital de imagem. 1◦ Congresso Ibérico-Latino Americano de Madeirana Construção, CIMAD11, Universidade de Coimbra, Coimbra, 7-9 Junho, 2011. (oralpresentation)

2010 (5)[17] Sousa, A.M.R.; Xavier, J.; Vaz, M.; Morais, J.J.L.; Filipe, V.M.J. Measurement of dis-

placement fields with sub-pixel accuracy by combining cross-correlation and optical flow.8◦ Congresso Nacional de Mecânica Experimental, G. Vasconcelos et. al. (Eds.),Livro de Resumos: pp. 253-254, CD-ROM: artigo completo, APAET, Universidade doMinho, Guimarães, 21-23 Abril, 2010. (oral presentation) m

[16] Pereira, J.; Xavier, J.; Morais, J.; Lousada, J.; Pierron, F. On the evaluation of elasticproperties of P. pinaster at the growth ring scale. 8◦ Congresso Nacional de MecânicaExperimental, G. Vasconcelos et. al. (Eds.), Livro de Resumos: pp. 105-106, CD-ROM: artigo completo, APAET, Universidade do Minho, Guimarães, 21-23 Abril, 2010.(oral presentation)

[15] Xavier, J.; de Jesus, A.M.P.; Morais, J.; Pinto, P. Characterisation of the modulus ofelasticity of wood by compression tests parallel to the grain. 8◦ Congresso Nacionalde Mecânica Experimental, G. Vasconcelos et. al. (Eds.), Livro de Resumos: pp.107-108, CD-ROM: artigo completo, APAET, Universidade do Minho, Guimarães, 21-23Abril, 2010. (oral presentation)

[14] Camanho, P.P.; Dávila, C.G.; Lopes, C.S.; Catalanotti, G.; Bessa, M.A.; Xavier, J. Onthe relation between cohesive laws and resistance curves in the tensile and compressivelongitudinal failure of composites. Conferência Ibérica de Fractura e IntegridadeEstrutural, FEUP, Porto, 17-19 Março, 2010. (oral presentation) m

[13] Pereira, F.A.M.; Dourado, N.; Morais, J.J.L.; de Moura, M.F.S.F.; Xavier, J.; Dias,M.I.R.; Azevedo, J.M.T. Mode I fracture of cortical bone tissue. Conferência Ibéricade Fractura e Integridade Estrutural, FEUP, Porto, 17-19 Março, 2010. (oral pre-sentation)

2009 (1)[12] Ribeiro, J.; Lopes, H.; Vaz, M.; Xavier, J. Estudo numérico e experimental do campo

de deformações na interface osso-implante. Congreso de Métodos Numéricos enIngeniería, Barcelona, Espanha, 29 Junho-2 Julho, 2009. (oral presentation)

2008 (2):[11] Custódio, P.; Tranchete, T.; Morais, J.; Guedes, R.; Xavier, J. Influência da humidade

e do envelhecimento físico no comportamento elástico de um époxido. 7◦ CongressoNacional de Mecânica Experimental, A. Jesus & J. Pinto (Eds.), Livro de Resumos,pp. 101-103, APAET, UTAD, Vila Real, 23-25 Janeiro, 2008. ISBN: 978-972-669-851-7. (oral presentation)

[10] Xavier, J.; Avril, S.; Pierron, F.; Morais, J. Characterisation of the radial variability ofstiffness parameters of P. pinaster by the virtual fields method. 7◦ Congresso Nacionalde Mecânica Experimental, A. Jesus & J. Pinto (Eds.), Livro de Resumos, APAET,UTAD, Vila Real, 23-25 Janeiro, 2008. ISBN: 978-972-669-851-7. (oral presentation)

2005 (1)

Curriculum vitæ of J. Xavier z July 16, 201528/29

[9] Xavier, J.; Garrido, N.; Morais, J.; Pinto, J.; Camanho, P.P. Estudo numérico e exper-imental do método do vão variável para a identificação das propriedades elásticas damadeira. 6◦ Congresso Nacional de Mecânica Experimental, APAET, Universidadedos Açores, 27-29 Julho, 2005. (oral presentation)

2004 (2)[8] Oliveira, J.; Xavier, J.; Morais, J. Utilização do ensaio de Arcan para a identificação do

comportamento ao corte da madeira de pinho. I◦ Congresso Ibérico: a madeira naconstrução, Universidade de Minho, Guimarães, 25-26 Março, 2004. (oral presentation)m

[7] Garrido, N.; Xavier, J.; Morais, J.; Lousada, J. Medição das propriedades elásticas aocorte da madeira de pinho através do ensaio “off–axis”. I◦ Congresso Ibérico: amadeira na construção, Universidade de Minho, Guimarães, 25-26 Março, 2004. (oralpresentation)

2003 (4)[6] Xavier, J.; Oliveira, J.; Morais, J.; Camanho, P.P.; Pierron, F. Measurement of the

shear modulus of wood P. pinaster Ait. by the Iosipescu test: numerical aspects. Livrode Actas do VII Congresso Nacional de Mecânica Aplicada e Computacional, Vol.I, Universidade de Évora, 14-16 Abril, 2003. (oral presentation) m

[5] Oliveira, J.; Xavier, J.; Morais, J. Análise por elementos finitos do ensaio de Arcanaplicado à madeira de P. pinaster Ait. Livro de Actas do VII Congresso Nacional deMecânica Aplicada e Computacional, Vol. II, Universidade de Évora, 14-16 Abril,2003. (oral presentation)

[4] Garrido, N.; Xavier, J.; Morais, J. Determinação do comportamento ao corte da madeirade P. pinaster Ait. usando o ensaio de “off–axis”: Análise por elementos finitos. Livrode Actas do VII Congresso Nacional de Mecânica Aplicada e Computacional, Vol.II, Universidade de Évora, 14-16 Abril, 2003. (oral presentation)

[3] Pereira, J.; Xavier, J.; Morais, J. Estudo por elementos finitos dum novo método paraa medição das propriedades elásticas da madeira de P. pinaster Ait. nas direcçõesperpendiculares ao grão. Livro de Actas do VII Congresso Nacional de MecânicaAplicada e Computacional, Vol. II, Universidade de Évora, 14-16 Abril, 2003. (oralpresentation)

2001 (1)[2] Xavier, J.; Dourado, N.; Morais, J.; Conceição António, C. Identification of elastic prop-

erties of orthotropic materials using evolutionary algorithms. 4◦ Encontro Nacionalde Análise Experimental de Tensões e Mecânica Experimental, Livro de Resumos,pp. 145-146, APAET, Instituto Politécnico de Bragança, Escola Superior de Tecnologiae Gestão, 17-19 Outubro, 2001. ISBN 972-95631-4-4. (oral presentation)

2000 (1)[1] Morais, J.; Moura, M.; Xavier, J.; Marques, A. In-plane mechanical behaviour of a

glass/epoxy composite. 2◦ Encontro da Sociedade Portuguesa de Reologia, Livrode Actas, pp. 243-252, SPR, FEUP, Porto, 7-8 Abril, 2000. (oral presentation)

Curriculum vitæ of J. Xavier z July 16, 201529/29