journal review - stirling engine
DESCRIPTION
Journal Review - Stirling engineTRANSCRIPT
![Page 1: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/1.jpg)
By:
S.Sai ganesh
C.Santhosh
R.Shivasudhan
Guided by:
Anand Chakravarthi M.C.
![Page 2: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/2.jpg)
LIST OF JOURNALS
Biomass Stirling engine – Dept. of mechanical engineering, Ichinoseki National College of Technology, Japan
Multi phase Stirling engine – Dept. of mechanical engineering, University of California.
![Page 3: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/3.jpg)
BIOMASS STIRLING ENGINE
In order to improve the global environment, a new society utilising biomass is considered more environment friendly than our current lifestyle which depends too much on fossil fuels.
A possible advantage of biomass fuel is balance of CO2 in the atmosphere.
So it is decided to provide a heat source to a Stirling engine powered by biomass fuels such as wood, saw dust etc.
![Page 4: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/4.jpg)
TECHNICAL SPECIFICATIONS OF A PRACTICAL BIOMASS POWERED STIRLING ENGINE
![Page 5: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/5.jpg)
SCHEMATIC LAYOUT OF A COGENERATION SYSTEM USING THE BIOMASS POWERED STIRLING ENGINE
![Page 6: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/6.jpg)
FEATURES OF THE COGENERATION SYSTEM
The burner of the Stirling engine behaves like a high quality biomass burning stove which gives enormous amount of clean heat.
Additionally heat is recovered from the cooling water by a simple heat exchanging element called Fan Coil Unit (FCU)
This process of recovering heat from the cooling water itself is called cogeneration
A heat pump (HP) is additionally used to recover even more heat from the cooling water. This improves the system efficiency.
The heat recovered is converted to electricity using a special unit called Thermo-Electric conversion module.
![Page 7: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/7.jpg)
MULTIPHASE STIRLING ENGINE In a multiphase Stirling engine each engine is an
alpha type Stirling engine that is connected to its neighbouring two engines via its two pistons.
It operates three engines and hence requires a minimum of three pistons.
Each piston is linked to the neighbouring two pistons via pressure waveform inside corresponding engine chambers
The working fluid is not exchanged or shared
Each piston is double acting, i.e. It acts as compression piston for one engine and expansion piston for the other.
It does not require a displace piston so the system is less complex and it can also be self starting
![Page 8: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/8.jpg)
CONSTRUCTION
The main parts of the system are heat exchangers, diaphragm pistons, flexures and actuators.
Heat exchangers: A heat exchanger is used to maintain uniform heat transfer characteristics
Diaphragm pistons: Pistons that are specially fabricated by casting silicone rubber in custom wax moulds which virtually eliminate friction.
Flexures: These are mechanical linkages which connect one engine to the other.
Actuators: The actuators assist piston movement and help coordinate all the three pistons
![Page 9: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/9.jpg)
Diaphragm piston
Heat exchanger
![Page 10: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/10.jpg)
Actuators
Finally fabricated multiphase Stirling engine
![Page 11: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/11.jpg)
CONCLUSIONS
Power was rapidly increased from 3 KW to 12 KW.
It was noted that gas spring hysteresis loss was high
Gas spring hysteresis: Loss of excessive heat due to difference in temperature.
To be overcome by suitable design methods.
![Page 12: Journal Review - Stirling engine](https://reader035.vdocument.in/reader035/viewer/2022081504/552cb907550346531e8b485f/html5/thumbnails/12.jpg)