.. . ~c;iAND . {l

).~0f'i M . " C ' iY;1 ;

'~J!!RADlAL

SAWS

Abridged copy of publication AD‐1406R 5/63 (May, 1963). Has same cover art as slightly later 

edition AD‐1406‐R2 3/64 (March 1964). 

 

This abridged copy of AD‐1406R 5/63 includes only pages that are different than or incomplete 

in the already‐posted later edition, which is available at: 

http://vintagemachinery.org/pubs/detail.aspx?id=1242 

Rockwell-bui It Delta light industrial power tools PROVEN PERFORMERS- power tools that have already set performance records for accuracy, versatility, safety and dependability, in factories . .. in school shops ... on the job with builders .. . and in home workshops of discriminating craftsmen! Tools well worth their NEW LIGHT INDUSTRIAL "tag."

Delta Light Industrial Tools are built by Rockwell, the makers of famous Delta Industrial, Walker-Turner and Porter-Cable tools. The same engineering skills and production know-how, acquired through more than 50 years of power tool experience, that go into the manufacturing of these quality products, also go into the making of the Delta Light Industrial Line.

When you've checked the Rockwell quality features built into Delta Light Industrial Tools . . . and see them in action ... you too will decide that it's Delta for you!

rtP' I

The right is reserved to make changes in design or equipment at any time, without incurring any obligation to install these on machines previously sold. and to discontinue models of machines , motors or accessories at any time without notice .

2

© by Rockwell Manufacturing Co ., 1963

4

Blade raising and tilting con­trols located up-front within easy operator reach for fast, safe operation ... easy-to­read tilt scale facilitates angle settings . . . protected on-off switch prevents acci ­dental starts_

Self-aligning rip fence with single-knob control locks se­curely both front and back for perfect alignment .. . micro-set adjustment fea­ture simplifies extra-fine rip fence adjustments.

\ ;/

Precision ground 25 x 15" table (25 x 22" with exten­sions). scientifically ribbed to prevent warping , fur­nishes ample support for rip­ping large bulky panels or other hard-to-handle mate­rials.

"Auto-set" miter gauge, in­cluded as standard equip­ment, features adjustable positive stops at most used positions of 90° and 45° R & L .. . accurately calibrated scale facilitates in-between settings through 120° swing_

I I

_[;JL

BIG CAPACITY FOR RIPPING,

CROSS-CUTTING, MITERING, BEVELING.

UNMATCHED VERSATILITY FOR EXTRA

OPERATIONS SUCH AS MOULDING, DADOING,

TENONING, USING ACCESSORIES

CATALOG LISTING

9" Tilting Arbor Circular Saw. Complete with Rip Fence, Guide Bars, No_ 50-864 Miter Gage, No. 33-196 Combination Saw Blade No_ 34-661 Table Insert, Arbor Pulley and Wrenches_ Wt. 103 lbs . ......... . ......... . . . . . . .. . . . . No. 34-600

9" Tilting Arbor Circular Saw COIDplete with ~ HP Motor. No. 34-600 Basic Machine, No. 62-253 ~ HP Motor, No. 5250 Motor Pulley, No. 49-152 V-Belt, and No. 34-974 Extension Wings. Wt_ 204 lbs_:

With No_ 50-810 Stand. . . . . No. 34-611 With No_ 50-127 Enclosed Stand ... No. 34-615

9" Tilting Arbor Circular Saw COIDplete with 1 HP Motor. Same as above except with No_ 62-273 1 HP Motor and No_ 50-810 Stand_ Wt_ 208 lbs_

........ . . . '" .. .. ..... No. 34-612

Items bearing individual catalog numbers in listing above can be ordered separately; refer to basic accessory listing page 38. For other accessories see page 31 .

SPECIFICATIONS

Speed with 3450 r.p_m. motor . . .. . .. . . . . . . . . . . . . . . . .... 3800 r_p_m. Diameter of arbor .. . . . . .. . .. . ... %" Diameter of saw blade. . . .. .... 9" Maximum depth of cut .. . ..... . 2~ " Maximum depth of cut at 45° . ..... 2" Table in front of blade max_ cut . 1l?4 " Rip capacity . .. ... center of 48" panel Table size. . . . ..... 22" X 15" wide Table size with extensions . . ... . . . ................... 22" X 25" wide Overall dimensions: Depth 36", Width 373--2 ", Height 173--2 "

BASIC ACCESSORIES

Super-Safe Blade Guard. With splitter and anti-kickback attachment_ Wt. 12 lbs .... . ... . .... . . No. 34-671

Retractable Casters. Wt_ 12 lbs.: For No_ 50-810 Stand ... No. 49-362 For Enclosed Stand No_ 50-127 ..... .... . . ... . . . . . . . . . .. . . No. 49-572

Belt Guard. Wt_ 4 lbs_ ... No. 34-975

CUTS STOCK

2%" THICK,

FULL 2"

AT 45° . . .

CROSS-CUT CAPACITY

(1" STOCK) 12X" ...

RIPS TO THE

CENTER OF A

4-FOOT PANEL

9" circular saw TILTING ARBOR DESIGN:

BLADE TILTS FOR ANGLE CUTTING OPERATIONS ...

TABLE ALWAYS REMAINS LEVEL

5

Full 1 H P motor develops up to 2 HP under load. Quality features include extra utility double shaft ... integral overload reset button .. . dust·tight junction box .. . lubricated·for·life ball bear ings ... and more.

Exclus ive Micro-Set Miter Stops assure perfect 90° and 45° cuts for the life of the saw. When required, each setting can be quickly and independently adjusted.

Built-in manually operated blade brake eliminates dan­gerous blade coasting ... permits you to safely stop the saw blade in seconds with easy lever actio n.

Provisions are built-in for complete re-adjustment and alignment of all moving parts to maintain newsaw cutting accuracy for the life of the machine.

Turret·Arm action allows 360° cutting tool rotation over the table. You can cut any angle-including left· hand miters and still get full capacity on the table.

All operating controls includ­ing the blade elevating han­dle and rip tence adjustment knobs are conveniently 10' cated up-front for safe, easy operation.

Extra-large edge grain west­ern fir 32" x 27" table facili­tates handling of large, bulky materials ... it is chemically water-proofed a nd varnish­ed to resist warpage.

Super 990 is available with either 9" or 10" blade and guard, as a bench model; or floor model machine with open-type steel stand and shelf or cabinet stand .

BAS I C ACCESSORIES

Retractable Casters. Wt. 12 lbs.

For No. 50-105 Open-Type Stand ..... No. 49-359 For No. 50-110 Cabinet-Type Stand ... No. 50-111

Retractable Leaf Guard. Mounts to standard saw guard for added operator protection. Wt. 5 lbs.

For 9" Saw Guard. . . . ..... No. 33-445 For 10" Saw Guard .. . . ...... . . .... No. 33-448

26

NEW SAFETY, UTILITY AND

CONVENIENCE FEATURES COMBINED WITH

PROVEN DELTA STANDARDS FOR

ACCURACY, FLEXIBILITY AND POWER

CATALOG LISTING

Super 990 Radial Saw. Bench Model complete with 1 HP, 3450 RPM, 115 / 230 Volt (wired for 115V operation), 60 Cycle, Single Phase Motor with Single-Pole Toggle Switch and Integral Motor Overload Protec­tion. Wt. 183 lbs.

With 9" Combination Blade and Guard . . .... ... . . . . .. No. 33-930 With 10" Combination Blade and Guard. . .. .. No. 33-900

Super 900 Radial Saw. Complete with Cabinet Stand. Same as above except with No. 50-110 Enclosed Cabinet-Type Stand. Wt. 2241bs.

With 9" Combination Blade and Guard. . . . ..... No. 33-940 With 10" Combination Blade and Guard. . . . . . .. No. 33-910

Super 990 Radial Saw. Complete with Stand. Same as above except with No. 50-105 Open-Type Steel Stand with Shelf. Wt. 214 lbs.

With 9" Combination Blade and Guard ............... No. 33-935 With 10" Combination Blade and Guard. . . ...... .. No. 33-905

For information on other models with motors for operation under various voltage, cycle and phase power systems, see your Delta Distributor. For other accessories, see page 28.

... A VERSATILE

ONE TOOL WORKSHOP

WITH A THOUSAN D

AND ONE USES-RIPS

.. . CROSS CUTS

.. . MITERS ... BEVELS

.. . DRILLS ... SHAPES

DADOES ... SANDS.

"SUPER 990"

9" -10" radial saw SPECIFICATIONS

Motor rating. . .... . . ... full 1 H.P.

Cross cut capacity: 9" saw- 15"; 10" saw-147l!"

M aximum rip capacity. . . . . 24" panel

M aximum dept h of cut: 9" saw- 27l!"; 10" saw-3"

D ado capacity (with 6" da do) . .. . .. . . . .. 1 Yt6 " wide

Diameter of saw arbor: VB" ; rear shaft; %"-24 RH

Diameter of saw blade supplied . . ... 9" or 10"

B evel positive stops .. . .. . . .. . . . . . .. 0°, 45° and 90 0

Miter posit ive stops . . .. . . .. .... 90 0 and 45°, R & L

Type of t rack . . . . : .... Lifetime, wear-resistant iron

Motor Speed (full load) 60 cycles . . ... .. .. 3450 rpm

Overall height (on stand) . .. . .. . ... .. . . . .... 53 7l!"

Table size. . . . . . . . . . . 32 x 27 x 1l{6"

T able height (on stand) . . ..... . . 33"

27

28

YOU CAN DO ALL THESE

SAWING OPERATIONS ON

YOUR SUPER 990 RADIAL SAW

Straight Ripping

Cross-cutting

Panel Ripping

Bevel Ripping

Bevel Cross-cutting

Right Hand Mitering

Left Hand Mitering

Bevel Mitering

SAW BLADES

All with %!f diameter Wt. B-2 lbs. each.

Type Size

Rip 9" 10"

Cross-cut 9"

10"

Combination 9"

10"

Novelty (Low Cost 9"

Combination)

Hollow 9" Ground 10"

arbor hole.

No.

33-198 1017

33-223

1018

33-196

1015

33-224

33-227

1016

WITH SPECIALLY!

"EXTRA JOB

J)JULLING. Your Delta Radial Saw will do all standard horizontal drilling and bor­ing operations including straight drilling, radius drilling, edge drilling and parallel drilling. It's easy to drill into the ends of extra long boards regardless of whether they are straight or mitered.

Geared Key Chuck. 0 to Y:;" capacity. Fits %"-18 L .H . threaded shaft. For use with left hand twist drills, spur bits, etc. Wt. 2Y:; lbs.. . . No. 43 -980

Geared Key Chuck. 0 to U" capacity. Fits %"- 24 R.H. threaded shaft. For use on outboard end of Super 990 only, for use with right-hand twist drills, etc. W t . 2 lbs .

. . . . . . . . . . . . . . . . . . . . . . . . No. 49-199

GRINDING. The radial saw can be quickly converted to a grinder for sharp­ening workshop tools and household cut­lery. With a wire brush or a cloth buffing wheel and buffing compounds, it's easy to remove rust and to polish all t ypes of metal and wood.

Grinding Wheel. %" x 7" dia. with %" hole, 46 grit coarse, Aluminum Oxide. Vvt. 1% lbs. . . . . . . . . . . . . . .No. 1267

Wire Wheel. 6" diam. with %" hole. Fine knotted. Wt. lIb ..... . ... No. 1236

Wire Wheel. 6" diam. with %" hole. Medium knotted. Wt. 1 lb . . ... No. 1237

Wire Wheel. 6" diam. with %" hole. Coarse knotted . Wt. 1 lb ....... No. 1238 For Buffing Compounds, Kits, Etc., See Page 37.

"

ENGINEERED ACCESSORIES YOU. CAN DO MANY . -:.

( ~ YOUR DELTA RADIAL SAW.

MOULDL.~ You can cut thousands of beautiful and attractive mouldings on your Delta Radial Saw easily and quickly with a moulding cutter head and the 46 different knife shapes available. Put beautiful edges on your work for that professional book.

Standard Moulding Cutterhead and Knife Set. Includes No. 265 cutterhead, No. 1521 wrench and Nos. 35-102, 35-103, 35-221, and 35-222 cutterhead knives. Wt. 8 lbs. . . . . . . . . . . . .. . ....... No. 34-813 For Other Moulding Accessories, See Page 31

SHAPINC . Because you can tilt the arbor on your Delta Radial Saw, you have in effect a tilting arbor shaper that gives you 50% more shapes per cutter. Delta's safe, 3-lip shaper cutters offer unlimited possi­bilities in making hundreds of moulded shapes on short, narrow, straight, curved and circular pieces of stock with ease and accuracy.

Shaper Cutter Adapter. For mounting Y2 "-3-lip shaper cutters to %"-18 L. H. treaded shaft. Wt. % lb ...... No. 33-600 For 3-Lip Shaper Cutters and Other Shap ing Accessories. See Page 36.

ROUTING. Delta's 3600 "Turret Arm" action permits you to do both pattern and circle routing. Do inlay work, cut orna­mental mouldings and many other pat­terns.

Router Bit Adapter. For mounting short shank, left hand rotation router bits to %" -18 L.H. threaded shaft. Wt. Y2 lb. ..... . .................... No. 33-277

%" Router Bit. Short shank, left hand rotation. Wt. Y2 lb . ... . ..... No. 33-282

%" Router Bit. Short shank, left hand rotation. Wt. Y2 lb .. . .. . .... No. 33-283

SANDING. When you sand on the Delta Radial Saw you give a satin-smooth finish to all of your projects and save hours of tedious hand sanding. Use abrasive drums or the disk sander for edge sanding, bevel sanding, butt sanding, surface sanding and sanding irregular surfaces and inside and outside curves.

8Y2" Dia. Sanding Disk. Fits %"-18 L.H. treaded shaft. Wt. 5 lbs ..... . No. 33-603

3" Dia. x 3" Abrasive Drum. Fits %"-18 L.H. treaded shaft. Wt. 2Y2 lbs .

.. . . . . . . ....... . ..... No.~~n 1%" Dia. x 2" Abrasive Drum. Fits %"-18 L.H. threaded shaft. Wt. 1% lbs.

. ... ........ ..... . .. . . .. No.~~" For Sanding Disks, Disk Adhesive and Abrasive Sleeves, Etc. See Page 37.

DADOING. By replacing the saw blade with a dado head you can do a variety of dadoing operations on your Delta Radial Saw. It's easy to set up for straight, angle dadoing or gaining, ploughing, rabbeting, cove cutting and other important opera­tions.

Dado Head Set. Consisting of two fiat­ground outside cutters (6" dia. x Ys" thick,) five center rakers ~ 4-Ys" thick, 1-\16" thick) with six paper washers for minute adjustments. With %" dia. arbor hole. Wt. 4Ibs .. ... . .. ... . .. No. 34-334

Dado Head Set. Consisting of two hollow ground outside cutters (6" dia. x Ys" thick,) four center rakers (I-U" thick, 2- Ys" thick, 1-\16" thick) with six paper washers for minute adjustments. With %" dia. arbor hole. Wt. 3Y2 lbs ... No. 34-333

Blade Spacing Collar Set. Permits mounting of two blades on saw arbor to cut tenons. Set of two U" and %". Wt. Y2 lb.. . . . . . . . . . . . . . .... No. 1171

OTHER OPERATIONS

Virtually any woodworking operation in­cluding • Taper Ripping • Parallel Dado­ing • Rafter Notching • Bevel Jointing • Circle Cutting • Scalloping • Horizontal End Cutting • Open End Tenoning • Blind Rabbeting· Jointing can be done on the

. Delta Radial Saw.

Through a V-belt and pulley arrange­ment, you can even use the radial saw motor to power other machines and equip­ment such as a scroll or band saw for curve-cutting operations or a lathe for wood turning.

29

FOR INDUSTRIAL

CUTTING EFFICIENCY

ON THE JOB

OR IN THE

WORKSHOP

Excl u sive lifetime track rod feature permi t s easy rota· t ion of t rack rods to guara n· tee p r ec i s ion acc u rac y for t h e life of t he machi ne.

Exclus i ve m ic r o·set m ite r stops assure perfect 90' and and 45 ' cuts. When reo qu ired, each setting ca n be quickly and indepe ndentl y adjusted.

CATALOG LISTING

10" portable radial saw WITH POWER-PLUS

1V2 HP MOTOR

10/1 Portable Radial Saw. Bench Model complete with No. 1015 Combination Saw Blade: No. 33-941 Saw Guard with Anti-Kickback Attachment; 172 HP 3450 RPM, 115/ 230 Volt motor (wired for 230V operation butsupplied with volta ge switch), 60 Cycle, Single-Phase Operation; Two-Pole Toggle Switch and Integral Overload

30

Protection. Wt. 265 lbs.. . . . . . . . . . . . . .. . .... . . . .. . ... .. ....... . No. 33-582

)

Steel Legs with Shelf. Wt. 32 lbs . . . . . . . . . . . . . . . . . . . . . . . . . No. 33-595

Retractable Leaf Guard. Mounts to standard guard for added operator pro-tection. Wt. 5 lbs ........ . No. 33-448

For information on 121/ Blad e Guard and Blades for use on 10" model , also other models with 2 HP motors for operation under various voltage cycle and phase power system , see your Delta Distributor. For accessories, see p age 28.

SPECIFICATIONS

Motor rating. . .. 172 H.P. Cross cut capacity- 1/1 stock . . .. . 16/1 Maximum rip capacity . ..... . . . . 25/1 Dado capacity

(with 6/1 dado) . . . . . . .1;{6/1 wide Maximum depth of cut- 10/l saw . . 3/1 Diameter saw arbor. . . ... %/1 Diameter of saw blade. . .10/1 Bevel positive stops ... . . . 0°, 45°, 90° Miter positive stops, 90° and 45°, R & L Type of track .. Replaceable, hardened,

nickel-alloy rods Motor speed (full load)

60 cycles. . . . .. ... 3450 rpm Overall height (on stand) . . ... . 65%" /I

Width of base ......... . . .. .. .. . 21 /1 Depth of base .. . ...... . .... . . 2572 /I

Wood table top .. . . . ... . ... 22 X 30/1 Height table top (on stand) . . . .. . 33/1

. .. broaden the usefulness of Delta Tools far beyond that of other makes-each machine becomes a multi-purpose unit. They enable you to do literally hundreds of extra jobs, greatly enhancing the value of your Delta Light Industrial Tools.

Widely interchangeable, most of them can be used on several models of the same tool, and many can be used on other tools. They're extremely easy to install-and they are surprisingly low in price.

CIRCULAR SAW Sup~r~Safe Blade Guard. With splitter and anti-kickback attachment. Wt. 121bs. .. . .. . . . . .No. 34-671 Table Extensions. Increases circular saw table size to a big 22 x 25 inches. Set of two: 22 x 5 inches. Wt. 221bs. No. 34-974 Belt Guard. For extra safety. Wt. 4 lbs.

....... No. 34-975 Standard Table Insert. Included with basic machine. Wt. 2 lbs . ..... No. 34-661 Auto-Set Miter Gage. Included with bas.ic machine. Wt. 4 lbs ..... . No. 50-864 Stop Rod Assembly. For use with miter gage. Simplifies repetitive cutting opera­tions. Wt. Yz lb.. . . No. 49-302

MITER GAGE CLAMP ATTACHMENT Holds work securely and safely, eliminates any tendency for work to creep toward or away from the saw blade. Clamp Attachment. For the No. 50-864 auto-set miter gage. With clamp screws and blocks. Wt. 2 ~ lbs ......... No. 865 Extra Clamp Screw and Block. Wt. lIb .

... . . . No. 873

TENONER

CLAMP ATTACHMENT

TENONER

Simplifies operation of cutting tenons for MOULDING CUTTERHEAD mortise and tenon joints. Stock can be fed with one hand- far removed from saw blade (s). Handles stock up to 2%:" thick. Tenoner. Complete with base plate. For the No. 34-600 circular saw. Wt. 31 lbs .

...... . . . .No. 1172

Blade Spacing Collar Set. Permits mounting of two circular saw blades on saw arbor to cut tenons. Set of two, ~" and %". Wt. Yz lb . . . .. . . .... . No. 1171

SAW BLADES All with %" diameter arbor hole. Wt. 1Yz lbs. each.

Type Size Cat No Rip 9" 33-198

Cross-cut 9" 33-223 Combination 9" 33-196

Novelty (Low-Cost

Combination) 9" 33-224

Hollow 9" 33-227 Ground Plywood 7" 34-707

MOULDING CUTTERHEAD Moulding Cutterhead. For use on Yz" and %" diameter arbor saws. Wt. 3 lbs.

.................... . ...... No. 265 Wrench. Wt. Ys lb .... . . ..... No. 1521 Moudling Cutterhead Insert. For the No. 34-600 circular saw. Wt. 1Yz lbs .. . .. . . . . . . . . . . . . . . . .. . .. No. 34-662

MOULDING CUTTERHEAD AND KNIFE SETS Standard Moulding Cutterhead and Knife Set. Includes No. 265 cutterhead, No. 1521 wrench and Nos. 35-102, 35-103, 35-221 and 35-222 cutterhead knives. For use on Yz" and %" dia. arbor saws. Wt. 8 lbs ........ . .... .. . ....... No. 34-813 :Uasic Moulding Cutterhead and Knife Set. Includes No. 265 cutterhead. No. 1521 wrench and No. 35-102 set of knives. For use on 72" and %" dia. arbor saws. Wt. 7 lbs ................... No. 34-821

CHOOSE FROM 46 DIFFERENT MOULDING CUTTERHEAD KNIVES Each set consisting of three knives. Wt. % lb.

112" Co've, 5/16" Quarter Round

.5/16" Cove~ %" Bead Va" and %" Qr . Rd. and 1,4" Bead

l/.tN and 1/2" Qr. Rd.

.fl"5l1 Straight Drawer Joint

90'" Flut.

~ .. ta...dI ... LI.L Ogee Window Sash Door Moulding (m) Door Moulding (f) Glue Joint 3 Bead (3/16" Bead) Wedge Tongue Wedge Groove

• Table Edge

5/16" Bead %i" Flu!e

~1dI • .. lib 3,411 Bead lA'{ Tongue 1/4" Groove Cove & Bead Moulding Oval Sash Oval Cope Door lip

31

36

SHAPER Shaper Fence. Included with basic ma-chine. Wt. 12 lbs . . ... . .. . , . .... No. 982 Stub Spindle. For counterbored ~" hole 3-lip shaper cutters: Nos. D-128, D-137, Wt. lIb.. . . . No. 1190 ~" Spindle. Included with basic ma­chine. For ~" hole 3-lip shaper cutters. Wt. 1 lb.. . . . . . . . . . . .. No. 43-935 U6" Spindle. Included with basic ma­chine. For U6" hole 3-lip shaper cutters. Wt. lIb .. . . . ... . .......... No. 43-936 Table Inserts. With Guide Shoulders. For shaping with template without the use of collars. Set of 2: 2 %" diam. and 1 %" diam. Wt. ~ lb . .... . .. ....... No. 1198

STRAIGHT CUTTERS-~" HOLE

1 ~" Diameter No. Thickness

D-256 ~ " D -259 U6" D-257 Va" D-258 ~"

1 Ys " Diameter D-107 ~" D-130 %: " D -I04 1" D-I05 1 ~"

l1U6" Diameter D -I08 ~" D-248 U6" D-127 Va"

2" Diameter D-218 Va"

2~" Diameter D-139 ~" D-249 U6" D-129 Va "

SPACING COLLARS-~" HOLE

Ys" Thickness No. Diameter

D-133 13,16" 3,16" Thickness

No. Diameter D-150 I 1 % "

~" Thickness D-155 %" D-217 1 %'2" D-134 1%2" D-140 E {6" D-215 11 %2" D-151 l Ys"

% " Thickness D-142 %:" D-I71 13,16" D-143 Ys " D-I72 IU6" D-144 1" D-173 1 ).{6" D-145 l Ys " D-132 1%2" D-141 1 YI6" D-146 1~ " D-174 1%;" D-175 1!1i;" D-176 1%;" D-147 1 %" D-148 1~ " D-I77 1 % " D-178 1l){6" D-179 llYI6" D-180 l Ys " D-149 11U6"

3-LIP SHAPER CUTTERS All with ~" arbor hole. Wt. ~ lb. each.

I 0·100 0 · 101 0·102 0·103 0·106 0·109

1/211 Cove, 511611

Qr. Rd . 5/,." Cove, 3/e" 1Ie" & 3fe" Qr.

Bead Rd ., 1/4" Bead 1/4" & 1/2" 90° Flute 1/4" Flute

Qr . Rd .

0·110 Drawer

Joint

• 0·128 Male Sash

to01 0·190

3·Bead (3f,." Bead)

0·197

0·120 Ogee

0·131 Glue Joint

nno

0·191 3·Flute

(3/'6' Flute)

0·121 Female Sash

• • 0·123 Cab. R.H.

Male

0·124 Cab. l.H.

Male

0·125 Cab. R.H.

Female

0·135 Cove & Bead

Mldg . l.H .

0·136 0·137 Cove & Bead Cove & Bead

Mldg. R.H. Cope R.H .

'·01 -

0·126 Cab. l.H .

Female

0·138 Cove & Bead

Cope l.H .

0·192 3·Bead

(1/4" Bead)

:c:

0 · 193 3·Flute

(1/4" Flute)

0-195 5·Bead

(1/e" Bead)

0·196 Wedge Tongue

w • 0·198 0·199 .0·201 0·202 0·203

Wedge Groove Ogee & Bead 1" Convex Edge 1/2" Flute 1/2" Bead Table Edge

114" Sead

~ • II 0 ·204 0·205 0·208 0·209

3/4" Flute Pgee R.H. Cove Sash Bead Sash ll..H. l.H.

w 0·212 0·213 0·214

3/e" Bead Beaded Screen Panel Raising Moulding

~ I 0·229 0-230 0·231 0-235

Step Moulding Pilaster Flute 9/16" 3/S" Flute Qr. Rd.

.6. ... ~..A. 0·250

3/S " & 3/,6 " Radii R.H.

0·251 3/'6' & 3/S" Radii l.H .

0·252 0·253 1/4" & 1/2" 1/2" & 1/4"

Radii Raaii l.H. R.H.

II 0·210

Bead Sash R.H.

~ 0·219

1" Bead

a.. 0·238

3/4 " Bead

0·254 5/'6' &

1/s" Radii Cutter R.H.

0-211 1" Flute

0·228 Flute·Bead

0-247 Door l ip

0·255 I/S" & 0/16 "

Radii Cutter l.H .

--

Look for the ROCKWELL trademark on the tools you buy ...

for over 50 years the symbol of quality and

reliability in power tools for the home and industry.

It's your guarantee of the best that money can

buy, backed by the finest possible service-with

the benefit of replacement parts always being

available when you need them.

It costs very little more at the start and much

less in the long run to equip your shop with the

best in power tools-Rockwell-built Quality

Power Tools.

IN THE UNITED STATES, MEXICO AND PUERTO RICO:

~ Rockwell. ~ MANUFACTURING COMPANY

Pittsburgh 8, Pennsylvania

IN CANADA: ROCKWELL MFG. CO. of CANADA LTD. P. O. BOX 978 MONTREAL, QUEBEC

ALL OTHER COUNTRIES: ROCKWELL INTERNATIONAL, S. A. 81 RUE de la SERVETTE GENEVA, SWITZERLAND CABLE ADDRESS: ROCKINT with agents and distributors throughout the world .

AD-1406R 5/63 4Y(lO) PRINTED IN U.S .A.