juice_extractor_©_

4
ServiceManual Philips Domestic Appliances and Personal Care Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification Vito - Cucina Juice extractor HR 2828 /CC /FC Service Manual 4322 277 00315 is herewith cancelled PRODUCT INFORMATION No parts should be washed in a dishwashing machine. Motor : Series wound Statically and dynamically balanced Self- lubricated bearings Power : 250 W Voltage : 110 - 120 V / 50 - 60 Hz 127 V / 60 Hz 220 - 230 V / 50 - 60 Hz 230 - 240 V / 50 - 60 Hz Speed unloaded : 13.000 - 15.000 rpm Cord length : 110 cm Weight appliance : 2300 gr Dimensions appliance : 27 x 20 x 28 cm Colour appliance : Ivory Capacity juice can : 600 ml SERVICE INFORMATION The Service Manual for version HR 2828/CC code number 4322 277 00315, has been replaced by this Manual which included the /FC version. The parts with item nos. 15 and 20 have been modified for safety reasons and are not interchangeable with the spare parts of the previous /CC version, only as a set. 4322 277 00392 02/03 item 1 The drive coupling has been screwed onto the rotor shaft by means of a left-handed thread. The drive coupling can be disconnected from the rotor shaft without opening the appliance by first removing the lid of the housing (item 12) and then using the slot in the rotor shaft to block the rotor (see drawing). 2 3 1 item 2 The following spacers have been placed on the rotor shaft: Material outer diam. metal 14 (opt. to adjust grater) metal 14 metal 12.5 synthetic 13 (opt. to adjust motor gap 0.5 ± 0.2) synthetic 13 synthetic 10 synthetic 13 See drawing for place of spacers on shaft. The correct tolerance between feeding tube and grater is 1.3 + 0.8 mm.

Upload: pukymotto

Post on 12-May-2017

219 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: juice_extractor_©_

Service ManualPhilips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

Vito - Cucina Juice extractor

HR 2828/CC/FC

Service Manual 4322 277 00315 is herewith cancelled

PRODUCT INFORMATION

No parts should be washed in a dishwashing machine.

Motor : Series wound Statically and dynamically balanced Self- lubricated bearingsPower : 250 WVoltage : 110 - 120 V / 50 - 60 Hz 127 V / 60 Hz 220 - 230 V / 50 - 60 Hz 230 - 240 V / 50 - 60 HzSpeed unloaded : 13.000 - 15.000 rpmCord length : 110 cmWeight appliance : 2300 grDimensions appliance : 27 x 20 x 28 cmColour appliance : IvoryCapacity juice can : 600 ml

SERVICE INFORMATION

The Service Manual for version HR 2828/CC code number 4322 277 00315, has been replaced by this Manual which included the /FC version.

The parts with item nos. 15 and 20 have been modifi ed for safety reasons and are not interchangeable with the spare parts of the previous /CC version, only as a set.

4322 277 0039202/03

item 1The drive coupling has been screwed onto the rotor shaft by means of a left-handed thread.

The drive coupling can be disconnected from the rotor shaft without opening the appliance by fi rst removing the lid of the housing (item 12) and then using the slot in the rotor shaft to block the rotor (see drawing).

2 31

item 2The following spacers have been placed on the rotor shaft:

Material outer diam.

metal 14 (opt. to adjust grater)metal 14metal 12.5synthetic 13 (opt. to adjust motor gap 0.5 ± 0.2)synthetic 13synthetic 10synthetic 13

See drawing for place of spacers on shaft.

The correct tolerance between feeding tube and grater is 1.3 + 0.8 mm.

Page 2: juice_extractor_©_

1 4206 136 50880 Coupling assy 2 not available Spacers on rotor shaft 3 4206 133 09140 Switch 4 9965 000 01037 Choke coil 5 4822 276 31591 Wire connector for two wires

9965 000 01056 Wire connector for three wires 6 9965 000 01057 Capacitor 7 4206 100 02030 Cord set Euro plug 4206 100 01850 Cord set Mexico / Taiwan 4206 100 02010 Cord set Argentina

4206 100 02050 Cord set Hong Kong / UK 4206 100 02060 Cord set Korea 4206 100 02080 Cord set China 8 4206 136 50050 Motor assy 110 - 120 V 4206 136 50060 Motor assy 127 V

4206 136 50080 Motor assy 220 - 230 V RIS 4206 136 50100 Motor assy 230 - 240 V RIS 9 4206 136 46180 Cushion set 10 4206 133 53190 Cushion 11 4206 136 50800 Housing assy

12 4206 133 92020 Lid of housing assy 13 4206 136 50820 Plastic sieve assy 4206 136 50860 Metallic sieve assy 14 4206 133 92890 Pulp container 15 4206 136 51590 Jar assy

16 4206 133 90870 Rod 17 4206 136 51030 Cleaning brush 18 4206 133 91940 Pusher 19 4206 133 92030 Tray 20 4206 136 51610 Cover assy

This product meets the requirements regard-ing interference suppression on radio and TV.

After the product has been repaired, it should function properly and has to meet the safety requirements as offi cially laid down at this moment.

M

SW

127 V / 60 Hz220-230 V / 50-60 Hz

240 V / 50-60 Hz

110-120 V / 50-60 HzAC

C R

M

SWL

L

240 V / 50-60 Hz220-230 V / 50-60 Hz

AC

SW = SwitchM = MotorR = Resistor L = Choke coilsC = Capacitor

(18 µH)(0.1 µF)

(3.3 MΩ ½ W)

Page 3: juice_extractor_©_

11

12

1

3

5

7

6

48

10

9

∅ 14∅ 14∅ 12.5∅ 13∅ 13∅ 10∅ 13

Synth.Synth.Synth.Synth.

MetalMetalMetal

2

Page 4: juice_extractor_©_

DAP0916

15

16

14

13

20

19

17

18