julius blum alum catalog

© 2005 JULIUS BLUM & CO., INC.

JuliusBlum&Co.Inc.

JuliusBlum&Co.Inc.

Stock ComponentsFor Architectural Metal Work Catalog18

P.O. Box 816 Carlstadt, New Jersey 07072 800 526 6293 201 438 4600 Fax 201 438 6003 www.juliusblum.com

http://www.juliusblum.com/

JuliusBlum&Co.Inc.Catalog18

JULIUS BLUM & CO., INC.

JULIUS BLUM & CO., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003i

Over the years, the Julius Blum & Co., Inc. Catalog has often been called the “bible” of the architectural metal trades. Published every four to five years, our hard-cover catalog not only contains our full line of stock components for architectural metal work but also includes indispensible engineering data to aid in the design of structurally sound and code compliant railing systems.

In addition to publishing this Catalog, we also publish an annual brochure which is inserted in the Sweet’s General Building and Reno-vation volumes—Section 05720/BLL. That brochure is a condensed version of this book but it will contain new items that have appeared since the publication of Catalog 18.

Our companion CD 18 is enclosed with this book. In addition to all information available in the print Catalog, the CD contains download-able CAD drawings of all Julius Blum products as well as the com-plete Guide Specifications. Our website, www.juliusblum.com, contains additional information concerning new products and photos of completed projects.

HistoryJulius Blum & Co., Inc. was founded by Julius Blum in a Manhattan basement in 1910. Initially his business was limited to ornamental iron for local fabricators. Bronze handrails and door saddles were added in the 1920s, aluminum handrails in 1930 and a full line of bronze items in 1948. Continuing to respond to industry demand, we devel-oped and tested our JB® Glass railing system in 1980 and reintro-duced nickel-silver handrail components in the early 1990s.

Julius Blum’s nephews, Bill Thurnauer and Walter Blum, took the helm following World War II; we continue to be a family business to this day with Joanne Blum as president.

Despite our growth and the changes in the industry over the years, we have not lost sight of Julius Blum’s desire to serve his custom-ers by carrying quality materials—in stock and in substantial quanti-ties—and providing prompt service.

QUALity CoNtroLProviding quality material has always been a tradition at Blum. The majority of our items are purchased for architectural use where finish is of prime importance. All items stocked by Blum are purchased, stored and shipped with this in mind.

iN stoCK—ProMPt sHiPMENtJulius Blum & Co., Inc. is unique in the industry. While most compa-nies choose to maintain minimal stock, we have always had substan-tial quantities on hand of every item we show in our Catalog. We take pride in prompt service and we generally ship within a day or two of receiving an order.

sHiPPiNG & PACKAGiNGAll components are produced and handled with great care and pro-tected for shipment by wrapping and/or crating to assure a product well suited for architectural work.

Aluminum bars, angles, channels and tubing, except for structural shapes, are stocked in bundles of approximately 100 pounds. These bundles are mill wrapped with paper interleaving to protect the sur-face during storage and shipment.

Small package shipments are made via UPS. All other shipments are by common carrier, FOB New Jersey.

FABriCAtioNJulius Blum & Co., Inc. supplies stock materials only and does not offer custom design, fabricating or installing services. it has always been our philosophy never to compete with our customers! If you need some help finding a local fabricator, we are always happy to recommend firms in your area which are familiar with our products.

FiNisHEsExcept as noted, all items in our catalog are supplied in a mill finish. Additional polishing, painting or anodizing of these items is not handled by Blum and would be performed by a professional polisher/finisher or the fabricator. Additional information on specifying architectural fin-ishes is available at the website of two trade associations serving the architectural metal industry: the National Association of Architectural Metal Manufacturers (www.naamm.org) and the National Ornamental and Miscellaneous Metal Association (www.nomma.org.)

JULIUS BLUM & CO., INC.P.o. Box 816 • Carlstadt, NJ 07072-0816 50 Blum Boulevard • Wood-ridge, NJ 07075Toll Free (U.S. & Canada) 800-526-6293Local New Jersey 201-438-4600Fax 201-438-6003 www.juliusblum.comE-mail [email protected] © 2005 Julius Blum & Co., Inc.

Dimensions, weights, and technical data published in this Cata-log have been ascertained with care but cannot be guaranteed. Details and availability are subject to change. Please call Blum with specific questions.

Catalog 18 is dedicated to the memory of

Walter H. Blum1916 - 2003

His intelligence, humor, kindness and generosity continue to inspire our customers, our suppliers, our employees and our friends.



mailto:[email protected]


JULIUS BLUM & CO., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003 ii

SHIPPING & PACKAGINGAll components are produced and handled with great care and pro-tected for shipment by wrapping and/or crating to assure a productwell suited for architectural work.

Aluminum bars, angles, channels and tubing, except for structuralshapes, are stocked in bundles of approximately 100 pounds. Thesebundles are mill wrapped with paper interleaving to protect the sur-face during storage and shipment.

Small package shipments are made via UPS. Allother shipments are by common carrier, FOB New Jer-sey.

FABRICATIONJulius Blum & Co., Inc. supplies stock materials onlyand does not offer custom design, fabricating orinstalling services. It has always been our philoso-phy never to compete with our customers! If youneed some help finding a local fabricator, we are always happy to rec-ommend firms in your area which are familiar with our products.

FINISHESExcept as noted, all items in our catalog are supplied in a mill finish.Additional polishing, painting or anodizing of these items is not handledby Blum and would be performed by a professional polisher/finisher orthe fabricator. Additional information on specifying architectural fin-ishes is available at the website of two trade associations serving thearchitectural metal industry: the National Association of ArchitecturalMetal Manufacturers (www.naamm.org) and the National Ornamentaland Miscellaneous Metal Association (www.nomma.org.) BUILDING CODE REQUIREMENTSBuilding code requirements and safety rules vary from one localityand from one type of structure to another, and are subject to periodicrevision. Therefore it is incumbent upon designers to acquaint them-selves and comply with the various codes and regulations governingeach project.

HANDRAIL & GUARDRAILJulius Blum & Co., Inc. has always stocked a wide range of handrailmouldings to suit many needs and conditions, but not all Blum hand-rails are suitable for all applications. Accessibility standards and codeauthorities often have dimensional limitations on handrail size whicheliminate larger handrail mouldings from consideration. Confirmwhether size limitations apply to your installation before specifying.

Most building codes differentiate between handrail and guardrail.Handrails are generally defined as being used for guidance and sup-port while the purpose of guardrails is to resist accidental falls. Handrailheights are commonly between 34" and 38", while guardrails are 42" in height.

There is often a requirement that a guardrail have a handrailincluded as well.

The detail to the right provides an example of a JB® Glass Railingused as both a guardrail and a handrail. The 31⁄2" cap rail is at a heightof 42"—too high and too large for use as a handrail. A 11⁄2" pipe handrailsection is mounted at a proper handrail height of 36". As shown, thehandrail is mounted using a 307 bracket and a 224 glass mountingadapter kit. The tempered glass must be drilled prior to tempering topermit use of the adapter kit (see page 10 for more information).

STRUCTURAL STRENGTH AND TESTING

Over the years, the Julius Blum & Co., Inc. Catalog has often beencalled the “bible” of the architectural metal trades. Published every fourto five years, our hard-cover catalog not only contains our full line ofstock components for architectural metal work but also includes indis-pensible engineering data to aid in the design of structurally sound andcode compliant railing systems.

In addition to publishing this Catalog, we also publish an annualbrochure which is inserted in the Sweet’s General Building and Reno-vation volumes—Section 05720/BLL. That brochure is a condensedversion of this book but it will contain new items that have appearedsince the publication of Catalog 18.

Our companion CD 18 is enclosed with this book. In addition to allinformation available in the print Catalog, the CD contains download-able CAD drawings of all JuliusBlum products as well as the com-plete Guide Specifications. Ourwebsite, www.juliusblum.com,contains additional informationconcerning new products and pho-tos of completed projects.

HISTORYJulius Blum & Co., Inc. wasfounded by Julius Blum in a Man-hattan basement in 1910. Initiallyhis business was limited to orna-mental iron for local fabricators.Bronze handrails and door saddleswere added in the 1920s, aluminumhandrails in 1930 and a full line ofbronze items in 1948. Continuing torespond to industry demand, wedeveloped and tested our JB®

Glass Railing System in 1980and reintroduced nickel-silverhandrail components in the early1990s.

Julius Blum’s nephews, BillThurnauer and Walter Blum, tookthe helm following World War II; wecontinue to be a family business tothis day with Joanne Blum as president.

Despite our growth and the changes in the industry over the years,we have not lost sight of Julius Blum’s desire to serve his customers bycarrying quality materials—in stock and in substantial quantities—andproviding prompt service.

QUALITY CONTROLProviding quality material has always been a tradition at Blum. Themajority of our items are purchased for architectural use where finishis of prime importance. All items stocked by Blum are purchased,stored and shipped with this in mind.

IN STOCK—PROMPT SHIPMENTJulius Blum & Co., Inc. is unique in the industry. While most companieschoose to maintain minimal stock, we have always had substantialquantities on hand of every item we show in our Catalog. We take pridein prompt service and we generally ship within a day or two of receiv-ing an order.

42"

36"

1135

307

224

1⁄2"glass

11⁄2" pipe



JuliusBlum&Co.Inc.

JULIUS BLUM & CO., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003iii

CONSTRUCTION CODES AND STANDARDSLike all other aspects of building construction, handrails, balusters andguards must conform to various regulatory requirements. Unfortu-nately, the requirements are not uniform and, therefore, they must beverified for the jurisdiction in which a project is located. Generally, oneor more of the following model codes will be enforced.

International Code Council (ICC) International Building Code 2003International Residential Code 2003

Building Officials and Code Administrators (BOCA) National Building Code

International Conference of Building Officials (ICBO) Uniform Building Code

Southern Building Code Congress International (SBCCI) Standard Building Code

National Fire Protection Association (NFPA) 101 Life NFPA 101 Life Safety Code 2003

The International Code Council (ICC), [BOCA, ICBO and SBCCI]has collaborated on the development of a single model building codeentitled the International Building Code (IBC) and a separate modelcode for one and two family dwellings and attached single familydwellings not exceeding three stories entitled the International Resi-dential Code (IRC). The first editions of these codes were available inJanuary 2000. It is anticipated the IBC and the IRC will gradually replacethe other model building codes in the United States.

AMERICANS WITH DISABILITIES ACTIn addition to the applicable building code, the requirements of theAmericans with Disabilities Act (ADA) and the Architectural Barriers Act(ABA) adopted by Congress must be complied with. These lawsrequire that all new and certain existing places of public accommoda-tion and commercial facilities be designed and constructed to beaccessible to and usable by persons with disabilities.

The Americans with Disabilities Act adopted by Congress in 1992required handrails to be 11⁄4" minimum and 11⁄2" maximum. However,the US Architectural and Transportation Barriers Compliance Boardpublished the ADAAG Manual—A Guide to the Americans with Dis-abilities Act Accessibility Guidelines—July 1998 has now properly clar-ified the intent of the dimensional requirements to be 11⁄4" minimum toa nominal 2" maximum. It should be noted that Section 4.26.2 Sizeand Spacing of Grab Bars and Handrails of the ADAAG Manualstates in part, “Standard IPS pipe designated by 11⁄4" to 11⁄2" inches is acceptable.”

HANDRAIL DIMENSIONSThrough the effort of the Building Code Modernization Council, themodel building codes, the Life Safety Code and ICC/ANSI A117.1-03similar requirements for handrail size as described below:Circular Cross Section. Handrails shall have a circular cross sectionwith an outside diameter of 11⁄4" (32mm) minimum and 2" (51mm) max-imum, or shall provide equivalent graspability.Non-Circular Cross Section. Handrails with other shapes shall bepermitted provided they have a perimeter dimension of 4" (100mm)minimum and 61⁄4" (160mm) maximum, and provided their largestcross-section dimension is 21⁄4" (57mm) maximum.

HANDRAIL CLEARANCEDuring the past several years the amount of finger clearance required forhandrails has been the subject of much regulatory discussion. It isbelieved a consensus as to what clearance should be required has beenreached by most standards committees and regulatory bodies. The tra-ditional clear space between a wall or other surface and a handrail of 11⁄2"has been accepted as the most beneficial space. The following codesand standards specify a wall clearance of 11⁄2" minimum.

International Building Code 2003ICC/ANSI A117.1-03The Access Board Guidelines, published in the Federal Register

July 23, 2004.Another current regulatory issue has been finger clearance from

handrail brackets. The InternationalBuilding code 2003, ICC/ANSI A117.1-03 and the Access Board Guidelinespublished in the Federal Register on July23, 2004 all contain requirements forunder handrail clearance similar to thosecontained in the IBC as shown below.

1009.11.4 Continuity. Handrail grip-ping surfaces shall be continuous, with-out interruption by newel posts or otherobstructions.

Exceptions: 3. Handrail brackets orbalusters attached to the bottom sur-face of the handrail that do not projecthorizontally beyond the sides of thehandrail within 11⁄2" (38mm) of the bot-tom of the handrail shall not be consid-ered to be obstructions and providedfurther that for each 0.5" (13mm) ofadditional handrail perimeter dimensionabove 4" (102mm), the vertical clear-ance dimension of 11⁄2" (38mm) shall bepermitted to be reduced by 0.125" (3mm).

The following table illustrates the approximate minimum clearancerequired from the bottom of a circular handrail to a handrail bracket.

Nominal Actual Outside Outside ClearanceIPS Diameter Diameter Perimeter Required

11⁄4" 1.66" 5.21" 11⁄4"11⁄2" 1.90" 5.97" 11⁄8"

STRUCTURAL REQUIREMENTSStructural requirements for handrails, guardrails and grab bars are fre-quently expressed in two ways. An applied loading distributed uni-formly along the rail and nonconcurrently a concentrated load appliedat any point along the top rail. The designer should consult the gov-erning codes, local ordinance, project specifications and regulatoryauthorities to determine specific structural requirements. An excellentsource of design load requirements can be found in ASCE/ANSI 7 Minimum Design Loads for Buildings and Other Structures publishedby the American Society of Civil Engineers.

The information on this page is intended to be helpful to architectsand specifiers. However it is imperative to contact the appropriate localcode authority for current information.

11⁄4"to 2"

11⁄2"min

2 1⁄4" max

(4" to6 1⁄4" perim

)

11⁄2"min


TABLE OF CONTENTS

JULIUS BLUM & CO., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003 1

JB® GLASS RAILING

Features 2

JB® Glass Railing Shoe Moulding 4

JB® Glass Railing Components 5

Wall Brackets 11

PIPE RAILINGS

Connectorail® Features 12

Connectorail® System 14

Connectorail® Brackets 20

Connectorail® Installation 22

Pipe Rail Fittings 25

Arc-Fit Pipe Notcher 27

O.D. Tubing and Fittings 30

TRADITIONAL RAILING

Features 31

Handrail Mouldings 32

Handrail Fittings 38

Starting Posts and Spindles 43

Ornamental Valances and Bars 47

Baluster Collars, Bases and Flanges 48

Post Caps 50

Finial Bases / Urn and Ball Finials 51

TREILLAGE AND ORNAMENTS

Features 52

Ornamental Railing Panels 53

Ornamental Collars 54

Treillage and Ornamental Railing Panels 55

Panels, Rosettes, Ornaments and Pickets 60

CARLSTADT® SYSTEM

Features 62

Carlstadt® Acrylic/Wood Components 64

Carlsrail® Systems 66

Carlstadt® Post Systems 68

Carlstadt® Brackets 80

HANDRAIL BRACKETS

Features 86

Wall Brackets 88

Carlstadt® Self-Aligning Wall Brackets 90

Vertical Mounting Brackets 91

Carlstadt® Post Brackets 92

Glass Mounting and Vertical Brackets 94

ELEVATOR CAB Two Piece Mounting Brackets 95

ELEVATOR CAB COMPONENTS

Features 96

Elevator Cab Components 97

Thresholds and Saddles 98

Door Saddles and Handrail Mouldings 99

Handrail Mouldings 100

Mounting Brackets 101

Glass Framing Sections 102

STOCK TUBING, BARS AND SHAPES

Features 104

Bronze 105

Aluminum 108

Stainless Steel 118

Steel 120

Nickel-Silver 121

ENGINEERING DATA 123

INDEX 131

In order to facilitate ordering, components shown in this catalog are color coded for material as follows:

Aluminum

Bronze

Nickel-Silver

Stainless Steel

Cast Iron/Malleable Iron/Steel

Acrylic/Wood

Plastic

Component available in more than one material


ALUMINUM STAINLESS

BRONZE STEEL

JB® GLASS RAILING COMPONENTSJuliusBlum&Co.Inc.

JULIUS BLUM & CO., INC. 800 526 6293 www.juliusblum.com FAX 201 438 60032

JB® Glass Railing is a system of metal railing components for usewith 1⁄2" or 3⁄4" tempered glass panels as structural balusters.

Aluminum Shoe Mouldings are designed to support a designload of 300 lbs. applied at any point at the top of a railing up to 42" in height. Proper mounting of the shoe moulding is crucial to thestrength of JB® Glass Railing. Test results are available upon request or from our website, www.juliusblum.com. Mechanicalproperties of glass may be verified with supplier of glass panels.

Shoe mouldings are supplied in two configurations and two alloys.Available for 1⁄2" and 3⁄4" tempered glass, the heavier sections, in alloy6063-T52, may be anodized and are better suited for bending and fas-cia mounting. The lighter section is extruded in high-strength alloy6061-T6 to provide required strength with minimum weight. All threesections can be surface mounted—exposed or with a sheet metaltrim—or set flush with the floor surface.

A Protective Insert prevents direct metal to glass contact andfits closely inside the recess in the handrail mouldings that aremounted to the glass with an adhesive selected at the discretionof the specifier.

The Setting Block supports and cushions the lower edge of theglass while centering it in the channel of the shoe moulding.

Glass panels are set in the shoe moulding using a filler selectedat the discretion of the architect or fabricator. Do not use epoxy-based fillers.

For matching wall-mounted or glass mounted handrail, use Carlstadt® wall brackets with matching tubing sections or JB® GlassRailing sections and concealed, inserted closure.

The glass tempering process requires that all fabrication be completed prior to tempering. Attempts to cut, drill or grind the edgesafter tempering are likely to cause breakage.

Aluminum glass rail sections are extruded from alloy 6063-T52and, when properly fabricated, are suitable for anodizing, includingmost of the hard-coat anodic processes. Black anodizing may result ininconsistent matches. Consult your anodizer before specifying.

Bronze glass rail sections are extruded from alloy C38500,architectural bronze.

Nickel-Silver extrusions are of alloy C79800. Nickel-silver is a copper alloy, similar in appearance to stainless steel with goldenhighlights. Nickel-silver sheets are available in various widths for use ascladding for shoe mouldings.

Stainless Steel glass rail sections are roll-formed, type 302/304(18-8). It is important to be aware that connections of roll-formed stain-less steel shapes require special attention to assure proper alignment.

Acrylic/Wood glass rail section is produced from oak which hasbeen impregnated with acrylic plastic according to the Permagrain®

Radiation Process. This provides a hard surface and permanent finishwhich has twice the resistance to indentation and several times theresistance to abrasion as the same conventional hardwood finish. It islaminated from several strips to obtain greater strength and continuousuniform lengths.

All items are carried in stock in substantial quantities for promptshipment.

Boston World Trade CenterEast Office Building, Boston, MAFabricator: DeAngelis Iron Work, Inc.,South Easton, MAArchitect: Shepley Bulfinch Richardson & AbbottPhotographer: Mark Flannery


JULIUS BLUM & Co., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003 3 JULIUS BLUM & Co., INC. 800 526 6293 www.juliusblum.com FAX 201 438 60032

JB® GLASS RAILING

JULIUS BLUM & Co., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003 3

CORNER BENDS, MITER CORNERS, END CAPSRadius and miter elbows match the contour of 1.900", 2½", 3", 3½", and 4" round tubing shapes. Either style of elbow may be used as a wall return and is attached to handrail by use of internal connector sleeves and structural adhesive. End caps are available for most sections and may be attached by structural adhesive.

HANDRAIL AND TUBINGJB® Glass Railing top mouldings are available in several shapes and sizes in aluminum, bronze, nickel-silver, stainless steel, and oak acrylic/wood. Handrails may be wall mounted using Carlstadt® brackets with an anchor plug or by using available matching 1.900", 2½", 3", 3½", and 4" tubing. Handrails may be mounted directly to the glass using Glass Mounted Handrail Kit with Carlstadt® wall brackets.

GLASS MOUNTINGResilient setting blocks support and cushion glass panels as they are inserted in the shoe. Setting blocks should be 4" to 6" long and placed at points ¼" and ¾" distance from edge of the length of the panel from each end. Space is allowed for plumbing and setting of glass—choice of filler material is at the discretion of the specifier/fabricator. Spacer blocks, ¼" thick, should be inserted between adjoining glass panels to prevent glass to glass contact.

MATCHING STOCK PARTS SPEED FABRICATION AND ASSEMBLY

HANDRAIL ASSEMBLYA vinyl protective insert protects the top edge of the glass panel and fits closely inside the handrail molding—a windshield sealer type clear adhesive is recommended. Intermediate rails may be attached directly to the glass (holes must be drilled before tem-pering) using the Glass Mounted Adapter Kit and Carlstadt® wall brackets. Splice connections for tubular sections are accom-plished with internal connector sleeves and structural epoxy.

JB® GLASS RAILING

JULIUS BLUM & Co., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003�

Alloy 6063-T52

11�2 Aluminum 8.24 lb/ft

Alloy 6063-T52

11�3* Aluminum 8.64 lb/ft* For use with ¾" glass.

Shoe Mounting DetailsProper mounting of the shoe moulding is crucial to the strength of JB® Glass Railing. While there are alternate methods of attachment, the assembly details on this page depict the four ways in which the shoe mouldings have been tested.

Please contact Julius Blum & Co., Inc. by fax, e-mail or phone to receive a copy of the complete Test Report.

Assembly DetailsSHOE MOULDING Aluminum, 20' lengthsFor use with ½" glass, except as noted.

• Nickel-Silver shown, page 5. * Material supplied by others. ** Mounting Bolt: 1⁄2" stainless steel socket head cap screw. Used on 12" centers.

2½"

1"

¾"

4Þ"

2½"

¾"

4Þ"

1"

2¾"

¾"

4¼"

1¼"

Alloy 6061-T6

11�1 Aluminum 5.42 lb/ft

Note: Aluminum must not be placed in direct contact with con-crete or dissimilar metals. Use appropriate paint or primer (see Guide Specifications Section 05720, available on our CD or www.juliusblum.com).

ALUMINUM

FLUSH MOUNTED

½" glass*

Filler*

Setting block

½" cap screws, 12" o.c.**

½" × 4" steel plate*

min. 2" concreteunder plate

11⁄32" min.

¼" min.

¼" min.

Filler **

Setting block


11⁄32" min.

SURFACE MOUNTED

FASCIA MOUNTED

¼" min.

Sheet metal cover•

Filler*


Setting block

11⁄32" min.

½" or ¾" glass*

Filler*

Setting block


½" × 4" steel plate*¼" min.

11⁄32" min.

Anchors: þ" × 2½" T bolts* 18" o.c. in 3,000-lb. concrete


JB®GLASS RAILING COMPONENTS


ALUMINUM STAINLESS NICKEL-SILVER

BRONZE STEEL MALLEABLE IRON

b

JB® GLASS RAILING COMPONENTS


August 28, 1985Julius Blum & Co., Inc.P.O. Box 816Carlstadt, NJ 07072

RE: WJE No. 820960JB Glass Railing Tests

Gentlemen:At your request, we have conducted tests on aluminum shoe

mouldings specified for the JB Glass Railing System. It is our under-standing that this particular railing system uses 1⁄2"-thick temperedglass as a balustrade to support aluminum, bronze, or stainless steelhandrail mouldings. The glass panels are mounted in the aluminumshoe mouldings, which are the subject of this testing.

The objective of these tests was to obtain information concerningthe load versus deflection characteristics of two types of shoe mould-ings, mounted in several different ways. In addition, the tests were todemonstrate that the shoe mouldings could withstand loadings wellin excess of current Model Code regulations, without failure or signif-icant deformation. Most Model Code regulations require a uniformloading of 50 lbs. per lineal foot, and some require a 200-lb. concen-trated load. These loads are not to be applied concurrently.

In the tests conducted and described in our report designatedWJE No. 820960, dated January 13, 1983, concentrated loads of 400lbs. to 800 lbs. were applied at approximately 42" from a referencedfloor surface. The test sections were 4' long. The test results and engi-neering calculations show that the strength of the shoe mouldingswhich were tested would exceed the above-mentioned Model Codeloading criteria by a factor of four.

Very Truly Yours,John M. HansonPresidentWISS, JANNEY, ELSTNER ASSOCIATES, INC.

b

11⁄32

"a

Setting blockShoe moulding

1⁄2" cap screws * – 12" o.c.

1⁄2" or 3⁄4" glass *

1⁄4" spacer *

SETTING BLOCKPolyvinyl Chloride

JB® Glass Rail shoe mouldings were subjected to structural testingby the independent testing lab of Wiss, Janney, Elstner Associates,Inc. of Northbrook, Illinois. The full report is available upon request. Thesummary of the report is reprinted below.

NICKEL-SILVER SHEET Satin Finish and masked one side7' lengths, Alloy C78200

Can be used to clad shoe moulding. See detail page 4.

b Thickness

Nickel-Silver 53⁄8" × 18gaNickel-Silver 8" × 18gaNickel-Silver 19" × 18ga

a b Coil Length

8711 1⁄2" 1" 25'8710 3⁄4" 11⁄4" 40'

* Material supplied by others.

NICKEL-SILVER

PLASTIC

Jeg’s Headquarters & Distribution CenterArchitect: Acock Associates ArchitectsFabricator: Quality Architectural & Fabrication, Franklin, OH




2"¾"

.125"

1¼"

6"

2"

3⁄4"

6"

11⁄4"

HANDRAIL MOULDINGS20' lengths, except as notedFor use with ½" glass

ALUMINUM NICKEL-SILVER

BRONZE STAINLESS ACRYLIC / WOOD

Approximate color and grain configuration

Moulding

Insert

Glass

a lb/ft Finish

1430* Stainless Steel 1.900" 1.70 No. 2B1432* Stainless Steel 2½" 1.96 No. 2B1452 Stainless Steel 2½" 1.96 No. 41433* Stainless Steel 3" 2.46 No. 2B1453 Stainless Steel 3" 2.46 No. 41472* Stainless Steel 4" 3.17 No. 2B1473 Stainless Steel 4" 3.17 No. 4

* Suitable for polishing

t

ab

c

.062"

a¾"

1¼"

1136 Aluminum 2.70 lb/ft

8662 Oak Acrylic/Wood 16' lengths

a b c t lb/ft

1130 Aluminum 1.900" ¾" 1¼" .109" 1.011132 Aluminum 2½" ¾" 1¼" .125" 1.521137 Aluminum 3" ¾" 1¼" .125" 1.721154† Aluminum 3" 1" 1¼" .125" 1.731135 Aluminum 3½" ¾" 1¼" .125" 1.951155† Aluminum 3½" 1" 1¼" .125" 1.971230 Bronze 1.900" ¾" ¾" .100" 3.431232 Bronze 2½" ¾" 1" .125" 5.191233* Bronze 3" ¾" 1¼" .125" 6.051235** Bronze 3½" ¾" 1¼" .187" 8.701330 Nickel-Silver 1.900" ¾" 1" .125" 3.431332* Nickel-Silver 2½" ¾" 1¼" .125" 5.191333* Nickel-Silver 3" ¾" 1¼" .125" 5.28

† For use with ¾" glass * 16' lengths ** 12' lengths

It is important to be aware that connections of roll-formed stainless steel shapes require special attention to assure proper alignment.


JULIUS BLUM & CO., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003 7 JULIUS BLUM & CO., INC. 800 526 6293 www.juliusblum.com FAX 201 438 60036

1½"¾"

1¼"

2Ž"

2½"¾"

1¼"1½"



Glass Size a b c

8709 Polyvinyl Chloride ½" ¾" ½" 1"8713 Polyvinyl Chloride ½" ¾" ½" 1Þ"8714 Polyvinyl Chloride ¾" 1" ¾" 1¼"

b

a

c

4538 Bronze 2.90 lb/ft5538 Nickel-Silver 2.96 lb/ft

Use with 8738 insert for ½" glass.

b

c

a

¼"

a b c

8738 Polyvinyl Chloride 1" ½" 1¼"

Fasten with windshield sealer type of clear adhesive, or clear double stick foam tape.

b

c

a

2¾"1Š"

1š"

2¾"1Š"

2ł"

PROTECTIVE INSERTSPolyvinyl Chloride, 7' lengthsFasten with windshield sealer type of clear adhesive

HANDRAIL MOULDINGS20' lengths, except as notedFor use with ½" glass

EDGE PROTECTORClear Copolymer7' lengths

4533* Bronze 3.66 lb/ft Use with 8738 insert for ½" glass* 16' lengths

5538 or 4538 with 8738 insert used with 6121 moulding (see p.102) on ½" glass


BRONZE PLASTIC

Glass Size a b c

8715 ½" .510" ½" Ž"8716 ¾" .760" ¾" Ž"

a

b

c

¼" ¼"

a

c

1Š"

b



2"

6"

¾"

Approximate color and grain configuration

Handrail 90° Radius 90° Miter Connector End Cap MatchingMoulding Elbow Elbow Sleeve Tubing

1130 7210 1160 7280 Yes 1132 1110 1111 1163 1180 Yes 1135 1122 1112 1164 1181 Yes 1136 1186 Yes 1137 1120 1115 1170 1182 Yes 1154 1120 1113 1170 1182 Yes 1155 1122 1114 1164 1181 Yes 1230 1222 1214† 1160 1282† Yes 1232 1210 1211† 1163 1280† Yes 1233 1220 1213† 1170 1283† Yes1235 1212† 1264 1281† Yes 1330 1330C 1363 1330N† Yes 1332 1332C 1163 1332N† Yes 1333 1333C 1170 1333N† Yes 1430 9310** 1414** 9363 9380** Yes 1432/52 1410* 1411** 1463 1480** Yes 1433/53 1420* 1413** 1464 1482** Yes 1472/73 1473M 1474 1473N** Yes 4538 4538N•† 5538 5538N•†

* No. 2B Finish ** No. 4 Satin Finish † Polished and lacquered, 180 grit • Matches profile

90° RADIUS ELBOW

b

a

a

90° MITER ELBOW

Fittings Availability

END CAPS a b

7280 Aluminum Þ" 1.900"1180 Aluminum Þ" 2½"1182 Aluminum Þ" 3"1181 Aluminum Þ" 3½"1282 Bronze ¼" 1.900"1280 Bronze ¼" 2½"1283 Bronze ¼" 3"1281 Bronze ¼" 3½"4538N Bronze 2" •1330N Nickel-Silver ¼" 1.900"1332N Nickel-Silver ¼" 2½"1333N Nickel-Silver ¼" 3"5538N Nickel-Silver 2" •9380 Stainless Þ" 1.900"1480 Stainless Þ" 2½"1482 Stainless Þ" 3"1473N Stainless Þ" 4"

• Matches profile

1186 Aluminum 8662N Oak/Acrylic Wood

a r Wall b

7210 Aluminum 1.900" 3" .109" 2"1110 Aluminum 2½" 5" .125" 2½"1120 Aluminum 3" 5" .125" 2½"1122 Aluminum 3½" 5" .125" 2½"1222 Bronze 1.900" 3" .100" 2½"1210 Bronze 2½" 5" .125" 2½"1220 Bronze 3" 6" .125" 2½"1330C Nickel-Silver 1.900" 5" .109" 2½"1332C Nickel-Silver 2½" 5" .125" 2½"1333C Nickel-Silver 3" 5" .125" 2½"9310 Stainless 1.900" 3" .062" 2"1410 Stainless 2½" 5" .062" 2½"1420 Stainless 3" 5" .062" 2½"

OD Wall a b

1111 Aluminum 2½" .125" 3" ¾"1115 Aluminum 3" .125" 4½" ¾"1113 Aluminum 3" .125" 4½" 11112 Aluminum 3½" .125" 4½" ¾"1114 Aluminum 3½" .125" 4½" 11214 Bronze 1.900" .100" 3" ¾"1211 Bronze 2½" .125" 3" ¾"1213 Bronze 3" .125" 4½" ¾"1212 Bronze 3½" .187" 4½" ¾"1414 Stainless 1.900" .062" 3" ¾"1411 Stainless 2½" .062" 3" ¾"1413 Stainless 3" .062" 4½" ¾"1473M Stainless 4" .062" 4½" ¾"


BRONZE STAINLESS ACRYLIC/WOOD

Jerome Duncan Ford, Sterling Heights, MIArchitect: TLM & Associates, P.C. Design: Ford & Earl Associates, Inc. Fabricator: Modern Mirror & Glass, Roseville, MI

2"

6"

Þ"

b a

a

b

r

b







a

Handrail sectionSerrated fordrive fit intohandrail section

Fasten with Scotch-Weld® adhesive page 22.

a

1363 Aluminum for 1330 handrail 1.650"1160 Aluminum for 1130 and 1230 handrails 1.682"9363 Aluminum for 1430 handrail 1.770"1163 Aluminum for 1132, 1232, and 1332 handrails 2.250"1463 Aluminum for 1432 and 1452 handrails 2.375"1170 Aluminum for 1137, 1154, 1233 and 1333 handrails 2.750"1464 Aluminum for 1433 and 1453 handrails 2.875"1264 Aluminum for 1235 handrail 3.125"1164 Aluminum for 1135 and 1155 handrails 3.250"1474 Aluminum for 1472 and 1473 handrails 3.875"

d

c

b

OD t lb/ft Area I S

Aluminum 1.900" .109" .721 .614 .247 .260Aluminum 21⁄2" .125" 1.119 .933 .659 .527Aluminum 3" .125" 1.328 1.129 1.169 .779Aluminum 31⁄2" .125" 1.559 1.325 1.890 1.080Bronze 1.900" .100" 2.070 .565 .230 .242Bronze 21⁄2" .125" 3.441 .933 .659 .527Bronze 3" .125" 4.500 1.129 1.169 .779Bronze†† 31⁄2" .125" 4.850 1.325 1.890 1.080Nickel-Silver 1.900" .109" 2.250 .614 .247 .260Nickel-Silver† 21⁄2" .125" 3.400 .933 .659 .527Nickel-Silver† 3" .125" 4.500 1.129 1.169 .779Stainless Steel** 1.900" .062" 1.274 .375 .158 .166Stainless Steel 21⁄2" .062" 1.691 .479 .356 .285Stainless Steel 3" .062" 1.930 .577 .622 .415Stainless Steel 4" .062" 2.550 .804 1.556 .778

** No. 4 Satin Finish and Mill Finish † 16' lengths †† 12' lengths

t

OD

Community General Osteopathic Hospital, Harrisburg, PAArchitect: The Bower Partnership, Inc.Fabricator: Ebinger Iron Works, Schuylkill Haven, PA

O.D. ROUND TUBING 20' lengths, except as notedMill finish only, except as noted

CONNECTOR SLEEVE5" lengths

COVER FLANGESatin Finish

Aluminum 6063T52Bronze C38500Nickel-Silver C79800Stainless Type 304

OD b c d

711 Aluminum 1.900" 1" 1.94" 4"1125 Aluminum 21⁄2" 1" 2.54" 43⁄4"1123 Aluminum 3" 1" 3.04" 5"811 Bronze 1.900" 1" 1.94" 4"

1225 Bronze 21⁄2" 1" 2.54" 43⁄4"1223 Bronze 3" 1" 3.04" 5"211 Stainless 1.900" 7⁄8" 1.94" 41⁄2"

1425 Stainless 21⁄2" 11⁄16" 2.54" 47⁄8"1423 Stainless 3" 17⁄16" 3.04" 61⁄8"411 Nickel-Silver 1.900" 1" 1.94" 4"

1325 Nickel-Silver 21⁄2" 1" 2.54" 43⁄4"1323 Nickel-Silver 3" 1" 3.04" 5"


BRONZE STAINLESS


a

6"

11 ⁄16"

a

3 ⁄38⁄8⁄"

b

a

CLOSURES5' lengthsFlat. 12'-14' random lengths

WALL-MOUNTED HANDRAILMatching tubing sections are available for wall mount using Carlstadt® wall rail brackets. JB® Glass Rail sections may also bewall mounted using the appropriate hardware. An anchor plug slipsinto the recess of the handrail and is locked in place by the bracketmounting screws. The handrail bracket flange is concealed insidethe recess of the handrail. The underside of the handrail may beclosed with an aluminum closure or stainless flat.

a lb/ft

1138 Aluminum 3⁄4" .101139 Aluminum 1" .13

For use with aluminum, nickel silver,and bronze handrails

Bottom of anchor plug has continuousthread for #10 – 32 screw.

a b lb/ft

Stainless 3⁄16" 3⁄4" .48

For use with stainless steel handrails

a

1162 Aluminum 3⁄4"1161 Aluminum 1"

ANCHOR PLUG Fits recess in handrail

JuliusBlum&Co.Inc.



ALUMINUM STAINLESS

BRONZE

Handrail may be mounted to the face of the tempered glassbalustrade using a combination of Carlstadt® wall brackets andour glass mounting adapter kit. The kit contains a disc with a 3⁄8"stud weld, a bushing, and two gaskets.TO ASSEMBLE: � Prior to tempering, for 1⁄2" glass drill a 5⁄8" clear hole; for 3⁄4"glass drill a 7⁄8" clear hole (Do not attempt to drill a hole in tempered glass—it will mostlikely break) � insert the bushing in the hole� insert the stud welded disc with gasket through the bushing;place the gasket on the other side� thread on bracket and tighten.

3"

3⁄16"

3⁄8" StainlessStud

Gaskets

Bushing

Glassa

BushingGlass Size a Diameter

824 Bronze 1⁄2" 1⁄2" 5⁄8"840 Bronze 3⁄4" 3⁄4" 7⁄8"224* Stainless 1⁄2" 1⁄2" 5⁄8"240* Stainless 3⁄4" 3⁄4" 7⁄8"

* For use with aluminum and stainless brackets.

GLASS-MOUNTED HANDRAIL

GLASS-MOUNTED HANDRAIL ADAPTER KITFor 1⁄2" and 3⁄4" GlassSatin Finish

3⁄8" Stainless Stud

Gaskets

Bushing

Glass





BRONZE STEEL MALLEABLEIRON

WALL BRACKETS

JULIUS BLUM & Co., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003 11 JULIUS BLUM & Co., INC. 800 526 6293 www.juliusblum.com FAX 201 438 600310

ALUMINUM STAINLESS

BRONZE


BRONZE STAINLESS

3"

a

1Ð"

ð"

b

b2½"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Stainless detail

Aluminum, Bronzeand Nickel-Silver detail

3"

a

1Ð"

ð"

b

b2½"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Stainless detail


a b

443 Aluminum 3" 1Ž" 444 Aluminum 3½" 1Ž" 844 Bronze 2½" 1Ž" 843 Bronze 3" 1Ž"1343 Nickel-Silver 3" 1Ž" 271 Stainless 2¼" 1Ý" 243 Stainless 3" 1Ý"

3"

a

1Ð"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Ý" r

b2½"


b

Stainless detail

3"

a

1Ð"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Ý" r

b2½"


b

Stainless detail

b

a

c

1þ"2"ý"

þ" tapped hole

Ctsk. for #10 FHMS

a b c

371 Aluminum 2½" 3Þ" 1Š"302 Aluminum 3Þ" 3¾" 1ž"370 Bronze 2½" 3Þ" 1Š"304 Bronze 3Þ" 3¾" 1ž"170 Nickel-Silver 2½" 3Þ" 1Š"270 Stainless 2½" 3Þ" 1Š"

b

a

c

1þ2"

þ" tapped hole

Ctsk. for #10 FHMS

ý"

b

a

c

1þ"2"

þ" tapped hole

Ctsk. for #10 FHMS

3"

a

1¼"

2ð"3"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

3"

a

1¼"

2ð"3"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

a b 321* Aluminum 2¼" 1Ž" 403* Aluminum 3" 1Ž" 405* Aluminum 3½" 1Ž" 842 Bronze 2¼" 1Ž" 801 Bronze 2½" 1Ž" 803 Bronze 3" 1Ž" 1303 Nickel-Silver 3" 1Ž" 242 Stainless 2¼" 1Ý" 221 Stainless 2½" 1Ý" 223 Stainless 3" 1Ý"

CARLSTADT®Self-Aligning WALLBRACKETSSatinFinish

a

307* Aluminum 2½"308* Aluminum 3"

a b c

376 Aluminum 2½" 3Þ" 1Š"389 Aluminum 3Þ" 3¾" 1ž"375 Bronze 2½" 3Þ" 1Š"319 Bronze 3Þ" 3¾" 1ž"176 Nickel-Silver 2½" 3Þ" 1Š"275 Stainless 2½" 3Þ" 1Š"

WALLBRACKETSCast,SatinFinish,Forusewithpiperailing

WALLBRACKETSCast,SatinFinish

*AlsoavailableinclearanodizedAA-M32-C22-A31(204RI)

PIPE RAILINGS

JULIUS BLUM & Co., INC. 800 526 6293 www.juliusblum.com FAX 201 438 600312

Connectorail® isaneasy-to-assemblepiperailingsystemthatisfabricatedquicklywithoutwelding.Componentssliptogetherandarejoinedbyconcealedmechanicalfastenersatintersectionsandbyepoxystructuraladhesiveatsplicejoints.TheConnectorail®systemhasbeenengineeredandtestedto

assurestructuralstrengthandintegritywhenproperlyinstalled.Testresults are available upon request.Connectorail®meets estab-lishedsafetystandardswheninstalledinaccordancewithourdataandinstructions.AluminumConnectorail®componentsarestockedin1¼"

and1½"pipesizes—schedules10and40—inalloy6063witheitherclear anodized—AA-M10-C22-A31 (204R1)—or smoothmill fin-ish.Connectorail®pipeisspeciallyextrudedtoclosedimensionaltoleranceswithacleansmoothsurfacefinish.Aluminumpipe isstocked inmill-wrapped, paper-interleaved bundles of approxi-mately100pounds.Aluminumpipeissuitableforpowdercoatingandanodizing,includingmostofthehardcoatanodicprocesses.Blackanodizingmayresultininconsistentmatches.Consultyouranodizerbeforespecifying.StainlessSteel (Type304)componentsarefurnishedwithaNo.

4satinfinishin1½"schedule5pipesizeinanOrnamentalGradewithaguaranteedexpectedyieldof55,000[psi].Thepipeissleevedforsurfaceprotection.

StainlessConnectorail®canalsobe fabricatedbywelding.

TheuseofConnectorail®stainlesssteelfittingseliminatesnotchingandgrindingandpermitsrapidweldingwithaminimumadditionofweldmetal.BronzeConnectorail®issuppliedin1¼"and1½"pipesizes

indrawnpipealloyC23000(RedBrass)withasmoothmillfinish.Bronzefittingsaresatinfinished—180grit—andlacquered.Nickel-Silver Connectorail® is available in extruded 1½"

schedule10pipeinalloyC79800withasmoothmillfinish.Radiuselbowsaresuppliedsimilarly.Allothercomponentsaresatinfinished—180grit—andlacquered.

Fittingsforweldedassemblyareavailableincastaluminum,bronze,ironandmalleableiron,andformedsteelandstainlesssteel.Flangesandelbowsareavailableforaluminum,bronze,nickel-silver,andstainlessODtubing.Allitemsarecarriedinstockinsubstantialquantitiesandarenormallyavailableforimmediateshipment.

AmericanswithDisabilitiesAct(ADA): The Americans with Disabilities ActadoptedbyCongressin1992requiredhandrailstobe1¼"minimumand1½"maximum.However,theADAAG Manual— July 1998,publishedbyUSArchitectureandTransportationBarriersComplianceAccessibilityGuidelines,hasnowclarifiedtheintentofthedimensionalrequirementstobe1¼"minimumtoanominal2"maximum.ItisimportanttonotethatSection4.26.2Size and Spac-ing of Grab Bars and HandrailsoftheADAAG Manualstatesinpart,“StandardIPSpipedesignatedby1¼"to1½"isacceptable.”

ASCAPBuilding,Nashville,TNArchitect:BulliaAssociatesFabricator:Ameriprise,Nashville,TN

CONNECTORAIL® SYSTEM


CONTINUOUSPOSTSANDRAILSPostsandtoprailsrunincontinuouslengths,thus providing a system that is inherentlystrongerthanonewithcastteeandcrosscon-nections.Connectorail® has a continuous,smoothtopsurfaceasrequiredbyestablishedsafetystandardsandcoderequirements.Thestructuralintegrityoftherailingdependsontheproper selection of components, location ofposts,andproperassemblyandinstallation.

OPTIONSFORMOUNTINGConnectorail®postsmaybeembedded infloorslabwithacoverflange,surfacemountedwithaheavy-dutyfloorflange,orsidemountedon fascia or stringer by means of a fasciaflange.Areinforcinginsertisusedatthebaseofthepostforaddedstrengthandstiffness.Asocketforremovablerailings—withcover—isalsoavailable.

FULLRANGEOFFITTINGSAcompleteselectionoffittingsisofferedfortheConnectorail®system.Asuitablefittingisavailableforpracticallyanystairorramprailingcondition. Adjustable handrail brackets andramprailteesarerecommendedforunusualramporstairangles.

MECHANICALCONNECTIONSNon-weldedconnectionseliminateweldingdis-colorationandexpensivegrinding.Structuraladhesive,stainlesssteelmachinescrewswithlockwashers,andthreadedtubularrivetspro-videpositiveconnectionsatjoints.Mechanicalconnectionsavoidthereducedallowabledesignstresseffectofweldingheatonthestructuralpropertiesofaluminumhandrailpipe.

NoN-Welded CoNNeCtorail® SYSteM aNd PiPe railiNG FittiNGS For Welded aSSeMBlY


BRONZE STAINLESS

CONNECTORAIL® SYSTEMJuliusBlum&Co.Inc.



BRONZE STAINLESS

G

N

N

B

WW

BB

E

B

B

Q

B

B

ACPP

DD

B

B

B

E

M

S

GH

M M

M

G

K

N

BR

Y

R F

RaisedFloor

BuildingFloor

CornerPost

STAIRELEVATION

FRONT ELEVATIONSIDE ELEVATION

RAISED FLOORELEVATION

FRONT ELEVATION

SIDEELEVATION

SIDE ELEVATION

FRONT ELEVATION

RAMP RAILELEVATION(OffsetHandrailOptional)

Panel(by others)

B

X

A

H

T

G

G

G

UC

FASCIA FLANGEELEVATION

GATEASSEMBLY

R

BALUSTER RAILREMOVABLE INSTALLATION

PANEL RAIL

N

L

S

FITTINGS KEY: H Post Elbow R Ramp Rail TeeA 90° Radius Elbow J Gate Hinge S Cover FlangeB 90° Tee K Post Bracket T Fascia FlangeC Connector Sleeve L Gate Latch & Stop U Return ElbowD Heavy-Duty Floor Flange M 90° Corner Tee W Wall BracketE Rail Elbow N 90° Miter Elbow X SocketF Ramp Rail Elbow P 90° 3-Way Elbow Y Panel ClipG Angle Tee Q Toe Board

Aluminum components and pipe are carried in stock with a mill finish ora clear anodized finish—AA-M10-C22-A31 (204R1). When specifyinganodized fittings, add the suffix -A to catalog number listed (e.g. 7140-A).

Aluminum only

Alloy 6063-T832Drawn pipe precut to post lengths.Clear anodized or mill finish

ct

ct

Pipe Sched. c a7140 Aluminum 11⁄4" 10 1.660" 2"7440 Aluminum 11⁄4" 40 1.660" 2"7240 Aluminum 11⁄2" 10 1.900" 2"7540 Aluminum 11⁄2" 40 1.900" 2"8640 Bronze 11⁄4" 40 1.660" 3"8840 Bronze 11⁄2" 40 1.900" 3"1340 Nickel-Silver 11⁄2" 10 1.900" 2"9340 Stainless 11⁄2" 5 1.900" 3"

Pipe Sched. c a7141 Aluminum 11⁄4" 10 1.660" 2"7441 Aluminum 11⁄4" 40 1.660" 2"7241 Aluminum 11⁄2" 10 1.900" 2"7541 Aluminum 11⁄2" 40 1.900" 2"9341 Stainless 11⁄2" 5 1.900" 3"

Pipe Sched. t c lb/ft11⁄4" Aluminum 10 .109" 1.660" .62511⁄4" Aluminum 40 .140" 1.660" .78511⁄2" Aluminum 10 .109" 1.900" .72111⁄2" Aluminum 40 .145" 1.900" .94011⁄4" Bronze 40 .146" 1.660" 2.63011⁄2" Bronze 40 .150" 1.900" 3.13011⁄2" Nickel-Silver 10 .109" 1.900" 2.25011⁄2" Stainless 5 .062" 1.900" 1.274

Aluminum: Alloy 6063-T52 and Alloy 6063-T832clear anodized or mill finishBronze: C23000, smooth mill finishNickel-Silver: C79800, smooth mill finishStainless: Type 304, ornamental grade, No. 4 finish

Pipe Sched. Length c t7103 Aluminum 11⁄4" 10 38" 1.660" .109"7104 Aluminum 11⁄4" 10 50" 1.660" .109"7403 Aluminum 11⁄4" 40 38" 1.660" .140"7404 Aluminum 11⁄4" 40 50" 1.660" .140"7203 Aluminum 11⁄2" 10 38" 1.900" .109"7204 Aluminum 11⁄2" 10 50" 1.900" .109"7503 Aluminum 11⁄2" 40 38" 1.900" .145"7504 Aluminum 11⁄2" 40 50" 1.900" .145"

CONNECTORAIL® PIPE20' lengths

HIGH STRENGTH CONNECTORAIL POSTS

90° TEE

c

a

Use threaded rivet and SEMS screw for tee joints;through bolt and lock nut for crosses (see page 19).

90° CORNER TEE

Verify alldimensionsbefore cutting.

c

a





BRONZE STAINLESS

c

5"r

5"

c

e

r5"

Pipe Sched. c7443 Aluminum 1¼" 40 1.660"7243 Aluminum 1½" 10 1.900"7543 Aluminum 1½" 40 1.900"

c

0° to 28°

3"

Ł"

c

0° to 28°

3"

Ł"

c

6"

90˚ 6" TEE Aluminum only

90˚ RADIUS ELBOW

90°THREE-WAYELBOW

Pipe Sched. c a7130 Aluminum 1¼" 10 1.660" 2"7430 Aluminum 1¼" 40 1.660" 2"7230 Aluminum 1½" 10 1.900" 2"7530 Aluminum 1½" 40 1.900" 2"9330 Stainless 1½" 5 1.900" 3"

Pipe Sched. c7150 Aluminum 1¼" 10 1.660"7450 Aluminum 1¼" 40 1.660"7250 Aluminum 1½" 10 1.900"7550 Aluminum 1½" 40 1.900"

Railangleadjustablefrom0°to28°

Usethreadsealant.

b

5"

c

a

a

c

a

a

r

3½"

a

15⁄8" 7⁄16" hole

c

c

a

a

c

a

a Pipe Sched. b7163 Aluminum 1¼" 10 1.442"7463** Aluminum 1¼" 40 1.380"1363*** Aluminum 1½" 10 1.650"7263 Aluminum 1½" 10 1.682"7563** Aluminum 1½" 40 1.610"9363* Aluminum 1½" 5 1.770"

RAMPRAILTEEAluminumonly

90°MITERELBOW

Pipe Sched. c a7111 Aluminum 1¼" 10 1.660" 2"7411 Aluminum 1¼" 40 1.660" 2"7211 Aluminum 1½" 10 1.900" 2"7511 Aluminum 1½" 40 1.900" 2"9311 Stainless 1½" 5 1.900" 3"

Pipe Sched. c r a7173 Aluminum 1¼" 10 1.660" 2½" 5"7473 Aluminum 1¼" 40 1.660" 2½" 5"7273 Aluminum 1½" 10 1.900" 3" 5"7573 Aluminum 1½" 40 1.900" 3" 5"8673 Bronze 1¼" 40 1.660" 2½" 5"8873 Bronze 1½" 40 1.900" 3" 5"1373 Nickel-Silver 1½" 10 1.900" 3" 6"9373 Stainless 1½" 5 1.900" 3" 5"

WALLRETURN

SerratedfordrivefitintoConnectorail®pipe

*ForusewithStainlessSystem**ForusewithBronzeandAluminumSystems***ForusewithNickel-SilverandAluminumSystems

Pipe Sched. c r e7110 Aluminum 1¼" 10 1.660" 2½"7120* Aluminum 1¼" 10 1.660" 2½" 2½"7410 Aluminum 1¼" 40 1.660" 2½"7420* Aluminum 1¼" 40 1.660" 2½" 2½"7210 Aluminum 1½" 10 1.900" 3"7220* Aluminum 1½" 10 1.900" 3" 3"7510 Aluminum 1½" 40 1.900" 3"7520* Aluminum 1½" 40 1.900" 3" 3"8610 Bronze 1¼" 40 1.660" 2½"8810 Bronze 1½" 40 1.900" 3" 1330C Nickel-Silver 1½" 10 1.900" 5"9310 Stainless 1½" 5 1.900" 3"

*ForwallreturnCONNECTORSLEEVES



ALUMINUM

STAINLESS

8"

c

α

r

8"

38°

35°

32°

29°

91⁄2" 10" 101⁄2" 11" 111⁄2" 12" 121⁄2"

6"61 ⁄2

"7"

71 ⁄2"

8"R

ISE

RS

TREADS

Angle Fitting Selector Chart RETURN ELBOW

29°α 32°α 35°α 38°α Pipe Sched. c r7179 7182 7185 7188 Alum. 11⁄4" 10 1.660" 21⁄2"7479 7482 7485 7488 Alum. 11⁄4" 40 1.660" 21⁄2"7279 7282 7285 7288 Alum. 11⁄2" 10 1.900" 3"7579 7582 7585 7588 Alum. 11⁄2" 40 1.900" 3"9379 9382 9385 9388 St. St. 11⁄2" 5 1.900" 3"

Angle fittings are carried in stock for 29°, 32°, 35°, and 38° angles ofinclination. To select the correct angle fitting for a stairway, plot theintersection of riser and tread dimensions on the chart above. The zoneinto which the intersection falls will indicate the correct angle value for fittings.

Example: A 7" riser and a 10" tread require 35° angle fittings.

29°α 32°α 35°α 38°α Pipe Sched. c r7109 7112 7115 7118 Alum. 11⁄4" 10 1.660" 21⁄2"7409 7412 7415 7418 Alum. 11⁄4" 40 1.660" 21⁄2"7209 7212 7215 7218 Alum. 11⁄2" 10 1.900" 3"7509 7512 7515 7518 Alum. 11⁄2" 40 1.900" 3"9309 9312 9315 9318 St. St. 11⁄2" 5 1.900" 3"

4°α 29°α 32°α 35°α 38°α Pipe Sched. c r7119 7122 7125 7128 Alum. 11⁄4" 10 1.660" 21⁄2"

7416 7419 7422 7425 7428 Alum. 11⁄4" 40 1.660" 21⁄2"7216 7219 7222 7225 7228 Alum. 11⁄2" 10 1.900" 3"7516 7519 7522 7525 7528 Alum. 11⁄2" 40 1.900" 3"9316 9319 9322 9325 9328 St. St. 11⁄2" 5 1.900" 3"

4°α 29°α 32°α 35°α 38°α Pipe Sched. c7139 7142 7145 7148 Alum. 11⁄4" 10 1.660"

7444* 7439 7442 7445 7448 Alum. 11⁄4" 40 1.660"7244* 7239 7242 7245 7248 Alum. 11⁄2" 10 1.900"7544* 7539 7542 7545 7548 Alum. 11⁄2" 40 1.900"9344* 9339 9342 9345 9348 St. St. 11⁄2" 5 1.900"

*On 4°α angle tees, the screw hole is located in the center of the washer.

3" 7"

c

r

α

r

b

b

c

α

45°α Pipe Sched. c r7408 Alum. 11⁄4" 40 1.660" 21⁄2"7208 Alum. 11⁄2" 10 1.900" 3"7508 Alum. 11⁄2" 40 1.900" 3"

3"

7"

c

α

r

c

3"

1"

α

angle slope gradient4° 14:1 7.0%7° 8:1 12.3%

10° 6:1 17.6%

4°α 7°α 10°α Pipe Sched. c r7405 7406 7407 Aluminum 11⁄4" 40 1.660" 21⁄2"7205 7206 7207 Aluminum 11⁄2" 10 1.900" 3"7505 7506 7507 Aluminum 11⁄2" 40 1.900" 3"9305 Stainless 11⁄2" 5 1.900" 3"

Note: b = 4" for 4° post elbows, while b = 3" for all other post elbows.

POST ELBOW

RAIL ELBOW

RAMP RAIL ELBOW

ANGLE TEE





BRONZE STAINLESS

3"

1.90

0

13⁄4"13⁄4"21⁄2" 21⁄2"

7⁄16" hole1⁄2" bolts

11 ⁄4"

11 ⁄4"

31 ⁄2"

6"

b

9 ⁄916⁄16⁄

"

21 ⁄12⁄2⁄"

17⁄7 32⁄32⁄ " hole

a

2"

d

c

bPipe Sched. b c d

710 Aluminum 11⁄4" all 1" 1.688" 313⁄16"711 Aluminum 11⁄2" all 1" 1.938" 4"810 Bronze 11⁄4" all 1" 1.688" 313⁄16"811 Bronze 11⁄2" all 1" 1.938" 4"411 Nickel-Silver 11⁄2" all 1" 1.938" 4"211 Stainless 11⁄2" all 7⁄8" 1.938" 41⁄2"

Pipe Sched. h1 b7471 Aluminum 11⁄4" 40 12" 1.360"7271 Aluminum 11⁄2" 10 12" 1.667"7571 Aluminum 11⁄2" 40 12" 1.585"9371* Aluminum 11⁄2" 5 18" 1.750"

* For use with Stainless Steel system. See page 19 for anchor bolt.

Pipe Sched.748 Aluminum 11⁄2" all

See page 19 for anchor bolt.

Pipe Sched. a b c d e h1

7190 Alum. 11⁄4" 10 15" 5⁄16" 1.660" 7⁄16" 3⁄4" 91⁄4"7191 Alum. 11⁄4" 10 15" 5⁄16" 1.660" 19⁄16" 3⁄4" 91⁄4"755 Alum. 11⁄4" 40 15" 5⁄16" 1.660" 7⁄16" 3⁄4" 91⁄4"756 Alum. 11⁄4" 40 15" 5⁄16" 1.660" 19⁄16" 3⁄4" 91⁄4"

7290 Alum. 11⁄2" 10 15" 5⁄16" 1.900" 7⁄16" 1" 91⁄4"7291 Alum. 11⁄2" 10 15" 5⁄16" 1.900" 19⁄16" 3⁄4" 91⁄4"7293 Alum. 11⁄2" 10 24" 5⁄16" 1.900" 7⁄16" 3⁄4" 181⁄4"7294 Alum. 11⁄2" 10 24" 5⁄16" 1.900" 19⁄16" 1" 181⁄4"757 Alum. 11⁄2" 40 15" 5⁄16" 1.900" 7⁄16" 1⁄2" 91⁄4" 758 Alum. 11⁄2" 40 15" 5⁄16" 1.900" 19⁄16" 1⁄2" 91⁄4"

7593 Alum. 11⁄2" 40 24" 5⁄16" 1.900" 7⁄16" 1" 181⁄4"7594 Alum. 11⁄2" 40 24" 5⁄16" 1.900" 19⁄16" 1⁄2" 181⁄4"8893 Bronze 11⁄2" 40 24" 5⁄16" 1.900" 7⁄16" 3⁄4" 181⁄4"8894 Bronze 11⁄2" 40 24" 5⁄16" 1.900" 19⁄16" 3⁄4" 181⁄4"9390 St. St. 11⁄2" 5 26" 1⁄4" 1.900" 3⁄8" 1⁄2" 201⁄2"9391 St. St. 11⁄2" 5 26" 1⁄4" 1.900" 11⁄2" 1⁄2" 201⁄2"

See page 19 for anchor bolt.

† When using these floor flanges for surface mounting of posts, care must be takento provide adequate lateral bracing or end support. For freestanding railings, usethe heavy-duty floor flange.

31⁄2"

25⁄8"

a

6"

41 ⁄2"

3 ⁄4"

e

41⁄2"

4"h 1

7⁄16"hole

33⁄8"

d

c

b b

3⁄8" machinescrew

c

3⁄8" machinescrew

d

AluminumBronze

Stainless

b

17⁄7 32⁄32⁄ " hole

c

9 ⁄916⁄16⁄

"

a

Fascia flanges are supplied com-plete with two 3⁄8" stainless steelbolts for assembly to pipe post.Stainless steel fascia flanges usetwo round stand-offs and a stain-less steel tubular reinforcing bar.Thealuminum and bronze fascia flangesuse a single adapter bar and a solidaluminum reinforcing bar.

b

13 ⁄34⁄4⁄"

h 1

7⁄7 16⁄16⁄ " hole

5 ⁄58⁄8⁄"

5 ⁄58⁄8⁄"

4

COVER FLANGE

HEAVY-DUTY FLOOR FLANGE

FLOOR FLANGE†

OVAL FLOOR FLANGE†

Aluminum only

Pipe Sched. a b c7170 Aluminum 11⁄4" 10 1.660" 4" 113⁄16"727 Aluminum 11⁄4" 40 1.660" 4" 113⁄16"

7270 Aluminum 11⁄2" 10 1.900" 41⁄2" 21⁄16"728 Aluminum 11⁄2" 40 1.900" 41⁄2" 21⁄16"827 Bronze 11⁄4" 40 1.660" 4" 113⁄16"828 Bronze 11⁄2" 40 1.900" 41⁄2" 21⁄16"

1328 Nickel-Silver 11⁄2" 10 1.900" 41⁄2" 21⁄16"

FASCIA FLANGE

ROOF RAILING FLANGE Aluminum only

Pipe Sched. a b749 Aluminum 11⁄4" 40 1.660" 4"750 Aluminum 11⁄2" 40 1.900" 41⁄2"



BRONZE STAINLESS




BRONZE STAINLESS

TOE BOARD TOE BOARD CLAMPS For 11⁄2" pipe

END CAPS

POST CAPS

REMOVABLE RAIL SOCKET, COVER AND COLLAR

Assembly Details

31⁄2" 13⁄4"

37 ⁄8"

2"2"

Drilled for 1⁄4" SHMS

31⁄1 2⁄2⁄ "

6"

21⁄1 2⁄2⁄ " pipe

31⁄1 2⁄2⁄ "

38"

1 ⁄18⁄8⁄"

1⁄1 4⁄4⁄ " set screw

31⁄1 2⁄2⁄ "

1 ⁄14⁄4⁄"

6446 Aluminum20' lengths 1.13 lb/ft

746 Aluminum 747 Aluminum

Toe board clamps are supplied with stainless steel screws and nuts.

Socket cover fits tightly but can bepried loose with a screwdriver. When railing is in place, cover maybe stored in the side of toe board.

5⁄8"

1 ⁄2"

11⁄8"

4"

1"

c

Pipe Sched. c7181 11⁄4" 10 1.660"7481 11⁄4" 40 1.660"7281 11⁄2" 10 1.900"7581 11⁄2" 40 1.900"

Pipe c707 11⁄4" 1.660"708 11⁄2" 1.900"807 11⁄4" 1.660"808 11⁄2" 1.900"

varie

s6"

b

a a

b

Drill weep hole in postfor exterior installation

Aluminum (6061-T6) Stainless

Pipe Sched. b a7192 Aluminum 11⁄4" 10 1.427" 15"7492** Aluminum 11⁄4" 40 1.360" 15"7292* Aluminum 11⁄2" 10 1.667" 15"7295* Aluminum 11⁄2" 10 1.667" 24"7592** Aluminum 11⁄2" 40 1.585" 15"7595** Aluminum 11⁄2" 40 1.585" 24"9392 Stainless 11⁄2" 5 1.750" × .120" wall 26"

* For use with aluminum and nickel-silver pipe.** For use with aluminum and bronze pipe.

Floor mounting is best accomplished by mounting in concrete. Post inserts are recommended for reinforcing floor-mounted posts.

Chamfer inside ofpipe to start thendrive cap on

PIPE COLLARFor 11⁄2" pipe only

SOCKET COVER

c Sch. 40 only

c

1⁄1 2⁄2⁄ " tapped hole

11⁄4"c

Aluminum

1⁄2" tapped hole

SOCKET

Nickel-Silver; Stainless

Toe board

May be notchedto allow forclearance aroundbase or flange.

1⁄4" × 1⁄2" RHMS

Clamp

11⁄2" pipe

Storage for removablesocket cover 788

Outside Corner

Inside Corner

REINFORCING BARS

786 Aluminum

788 Aluminum

787 Aluminum

Pipe Sched. c7180 Aluminum 11⁄4" 10 1.660"7480 Aluminum 11⁄4" 40 1.660"7280 Aluminum 11⁄2" 10 1.900"7580 Aluminum 11⁄2" 40 1.900"1330N Nickel-Silver 11⁄2" 10 1.900"9380 Stainless 11⁄2" 5 1.900"

Flat post caps are drilled and tapped to provide secure mounting for handrail brackets.




ALUMINUM STEEL

STAINLESS

1"

1⁄2" 1⁄2"

1"

1 ⁄4"

3 ⁄8"

11 ⁄4"

11 ⁄8"

1"

1⁄4" Panel or mesh (by others)

1 " 11 " 1 2"1⁄1 2⁄2⁄ "31⁄1 2⁄2⁄ "

9⁄9 "

GATE LATCH AND STOP For 11⁄2" aluminum pipe only

PANEL CLIPSFor aluminum pipe only

Drill 27⁄32" holefor collar

Drill 25⁄64" holefor latch pin

Rubber bumper

Plastic knob

Ctsk. hole

3 ⁄8"

21⁄8"

Ctsk. holefor #10 FHMS

3"

GATE HINGE For 11⁄2" aluminum pipe onlyFor 11⁄2" aluminum pipe only

782/3 Aluminum

Pipe7260** Aluminum 11⁄2"

Packages of 4 sets

Supplied in sets of two—one plainand one with a self-closing spring

784 Aluminum

MANUAL RIVET HEADERThe Manual Rivet Header is a low-cost hand tool for setting theinternally threaded tubular rivets.

TUBULAR RIVETSAluminum

SEMS SCREWS AND THROUGH BOLTStainless Steel

The internally threaded tubular rivet is easily set in Connectorail® pipewall. The rivet provides high-strength 1⁄4"–20 threads for blind attach-ment of Connectorail® tee fittings.

SEMS Screw RHMS 1⁄4"–20 × 21⁄2" or 3"RHMS 1⁄4"–20 × 1" with lock nutwith lock washer

SEMS Screws: SEMS Screws prevent accidental omission of lockwashers and subsequent loosening of joints. The combination of1⁄4"–20 × 1" stainless steel RHMS with lock washers and internallythreaded tubular rivet fasteners provides connections of amplestrength to develop the full loading capacity of Connectorail® pipe. Through Bolts: Where two 90° tees are mounted opposite each otherto form a cross assembly, a stainless steel through bolt with lock nutmay be used.

For 11⁄4" pipe, use 1⁄4"–20 × 21⁄2" RHMS with lock nut.For 11⁄2" pipe, use 1⁄4"–20 × 3" RHMS with lock nut.

SLEEVE ANCHOR BOLT 3⁄8" × 3" Steel

GSA Spec. FF-S-325, 3.2.2.3.1.2The Sleeve Anchor Bolt is an all steel, rust-proofed, multi-purposeanchor bolt intended for use in a wide range of masonry materials. The3⁄8" bolt is recommended for use with Heavy-Duty Floor Flanges.

a

.332

"

.475

"

aA25-140 .745" Use with schedule 5 or 10 pipeA25-200 .808" Use with schedule 40 pipe

Thread Setter™

Set tubular rivet in hole, using setting tool.Upset rivet by pressing handles together.

* 5' Length ** Two-piece assembly

Pipe7460-5* Aluminum 11⁄4"7460† Aluminum 11⁄4"7560-5* Aluminum 11⁄2"7560† Aluminum 11⁄2"† Packages of 4 pieces


322 Aluminum


BRONZE STAINLESS

CONNECTORAIL® BRACKETS



BRONZE STAINLESS

1¼"

2ð"3"

¾"

Ctsk. for #10 FHMS

2¼"

½" std. thread stainless stud

Ž"

1¼"

2ð"3"

¾"

Ctsk. for #10 FHMS

2¼"


Ž"

1Ð"

¾"

Ctsk. for #10 FHMS

Ý" ra


Ž" b2½"

Aluminum, Bronze and Nickel-Silver detail

Stainless detail

b

1Ð"

¾"

Ctsk. for #10 FHMS

Ý" ra


Ž" b2½"


Stainless detail

b

Forusewithpiperailings a b 402 Aluminum 2½" 1Ž" 402L Aluminum 2½" 1Ž" 404 Aluminum 2¾" 1Ž" 802 Bronze 2¼" 1Ž"1302 Nickel-Silver 2¼" 1Ž" 222 Stainless 2¼" 1Ý"

POSTBRACKETSSatinFinish

Aluminum

1Þ"Post cap

Adapter Anchor plug

1"

BronzeStainlessNickel-Silver

BRACKETPOSTADAPTERSatinFinish

PipeSize Schedule ClearHole7161 Aluminum 1¼" all ½"7261 Aluminum 1½" all ½"8661 Bronze 1¼" all ½"8861 Bronze 1½" all ½"1361 Nickel-Silver 1½" all ½"9161 Stainless 1¼" all ½"9361 Stainless 1½" all ½"

ANCHORPLUGS

PipeSize Schedule b7162 Aluminum 1¼" 10 1.427"7462 Aluminum 1¼" 40 1.360"7262 Aluminum 1½" 10 1.667"7562 Aluminum 1½" 40 1.585"9362 Stainless 1½" 5 1.750"Anchorplugsprovidesecuremountingforbracketssupportingintermediaterails.Aluminumanchorplugsaremachinedfromsolidextrudedstock;thestainlesssteelanchorplugisfabricatedfromheavymetal.

1½"

b

Stainless

½" tapped hole

2"

b

Aluminum

½" tapped hole

TWO-PIECEMOUNTINGBRACKETSSatinFinish

3"

2"

ž"

1¼"

¼" hex socket head set screw

Ctsk. for¼" FHMSor flat headwood screw

3"

2"

ž"

1¼"


Ctsk. for¼" FHMSor flat headwood screw

168 Aluminum898 Bronze298 Stainless

Forelevatorcarhandrails

166 Aluminum896 Bronze196 Nickel-Silver296 Stainless

1¼"

r = .950"¼"

Two-piecemountingbracket

¼"– 20 × 1" FHMS(by others)

Adapter (requirescountersinking foruse with threadedrivet)

Pipe Tubular rivet

1¼"r

¼"


¼"– 20 × 1" FHMS(by others)

Adapter (requires countersinking for use with threaded rivet)

Pipe ortubing

Tubularrivet

ADAPTERSSatinFinish

r UseWith7164 Aluminum .830" 1.660"OD7264 Aluminum .950" 1.900"OD8864 Bronze .950" 1.900"OD8964 Bronze .750" 1.500"OD5264 Nickel-Silver .750" 1.500"OD5364 Nickel-Silver .950" 1.900"OD9164 Stainless .830" 1.660"OD9364 Stainless .950" 1.900"OD

1"

r = .950"

¼"

1"

r = .950"

1þ"

16'lengths,Forusewith1.90ODpipe.

Aluminumbracketsareavailablewithamillfinishoraclearanodizedfinish—AA-M32-C22-A31(204R1).Whendesignatingclearanodizedbrackets,addthesuffix-Atocatalognumberlisted(e.g.322-A).

8593 Bronze .56lb/ft 8594 Bronze 4.67lb/ft

þ" Mounting bolt(by others)

Wall plate

Outer sleeve

¼" set screw

þ" Mounting bolt

Outer sleeve¼" set screw

Inner sleeve

1½"

¾" 1¼" ¾"


þ" holež"

ł"

Ctsk. for ¼" FHMS or flat head wood screw

a 1"2"

Ctsk. for #10 FHMS

a

1"2"

Ctsk. for #10 FHMS

4"

4"

1½"

1½"

2½"

2½"

ł" clear hole

ł" clear hole

CONNECTORAIL® WALL BRACKETS



BRONZE STAINLESS

Aluminumpipebracketsarealsoavailablewithaclearanodizedfinish—AA-M32-C22-A31(204R1).Whendesignatingclearanodizedbrackets,addthesuffix-Atocatalognumberlisted(e.g.307-A).

3"

a

1¼"

2ð"3"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

3"

a

1¼"

2ð"3"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

3"

a

1Ð"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Ý" r

b2½"


b

Stainless detail

3"

a

1Ð"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Ý" r

b2½"


b

Stainless detail

Forusewithpiperailings

a307 Aluminum 2½"308 Aluminum 3"

a1022 Stainless 2½"1026 Stainless 3"

a b 321 Aluminum 2¼" 1Ž" 403 Aluminum 3" 1Ž" 405 Aluminum 3½" 1Ž" 842 Bronze 2¼" 1Ž" 801• Bronze 2½" 1Ž" 803• Bronze 3" 1Ž" 1303• Nickel-Silver 3" 1Ž" 242 Stainless 2¼" 1Ý" 221 Stainless 2½" 1Ý" 223 Stainless 3" 1Ý"

Hole for#10 MS

1¾"a

Ý" r1"

2¾"

2¾"

ł" clear hole

•Lacquered

b

a

2¼"

1þ"2"

ł" clear hole

Ctsk. for #10 FHMS

ý"

b

a

2¼"

1þ"2"

ł" clear hole

Ctsk. for #10 FHMS

b

a

c

1þ2"

þ" tapped hole

Ctsk. for #10 FHMS

ý"

b

a

c

1þ"2"

þ" tapped hole

Ctsk. for #10 FHMS

a b c376 Aluminum 2½" 3Þ" 1Š"389 Aluminum 3Þ" 3¾" 1ž"375• Bronze 2½" 3Þ" 1Š"319• Bronze 3Þ" 3¾" 1ž"176• Nickel-Silver 2½" 3Þ" 1Š"275 Stainless 2½" 3Þ" 1Š"STAMPED

Burnishedfinish

EXTRUDEDSELF-ALIGNINGSatinFinish,exceptasnoted

CAST

a478 Aluminum 2½"498 Aluminum 3892 Bronze 2½"894 Bronze 3192 Nickel-Silver 2½"218† Stainless 2½"220† Stainless 3

†SatinFinish

a b384 Aluminum 2½" 2¾"316 Aluminum 3" 3¼"388• Bronze 2½" 2¾"318• Bronze 3" 3¼"1088 Stainless 2½" 2¾"

•Lacquered

b

a

c

1þ2"

þ" tapped hole

Ctsk. for #10 FHMS

ý"

b

a

c

1þ"2"

þ" tapped hole

Ctsk. for #10 FHMS

CONNECTORAIL® CENTER POST BRACKET AND INSTALLATION INSTRUCTIONJuliusBlum&Co.Inc.


ALUMINUM

SPECIAL CHARACTERISTICSConnectorail® is a pre-engineered pipe railing system with prefabri-cated components. It is fabricated with ordinary tools and withoutwelding. It is designed to meet established safety standards.

The structural integrity of the railing system depends on properselection of components, proper number and location of supports andcorrect assembly and installation. The data and instructions in this cat-alog make it easy to meet these conditions (see engineering data onpages 123-130). Most fittings are dimensioned in whole inches to facil-itate layout. Confirm dimensions prior to cutting and/or assembly.

POSTSHigh strength posts and the use of reinforcing inserts are recom-mended to permit longer spans and to comply with the most stringentloading requirements. Fascia Flanges and Heavy-Duty Floor Flangesinclude reinforcing inserts. Refer to page 130 for post spacing tables.

SPLICE JOINTSSplice joints are secured by internal connector sleeves with the use ofepoxy adhesive. Connector sleeves must be ordered separately unlessa sleeve is already welded into the fitting, as it is in tees, wall returnsand miter elbows. Sleeves are made for a tight press fit and must becompressed with pliers or “C” clamps to permit them to slip into thepipe. Care must be taken to keep the sleeves round. Pipe ends mustbe cut square and to accurate length to assure smooth, tight joints.

The areas to be joined should be cleaned thoroughly. The adhesiveis mixed according to manufacturer’s directions. Do not mix more thanyou can use within 1⁄2 hour. Apply adhesive to inside of pipe. Fit com-ponents together and wipe off excess adhesive. Leave undisturbed foreight hours—longer in cold weather.

All splices should be made as near as possible to a post, in no eventmore than 12" from the nearest post

SCOTCH-WELD® EPOXY ADHESIVECatalog No. 3M EC-2216 B/A, Clear Amber Recommended for splice joints using connector sleeves. The areas tobe joined should be cleaned thoroughly.The adhesive is mixed accord-ing to manufacturer’s directions.

Cans —1 qt. total Tubes — 4 oz. total

About one half of the 5"-long sleeveshould be inside each of the pipe ends.

Apply adhesive to inside of pipe.

Flat Pipe Sched. c144 Aluminum 11⁄4" 40 1.660"145 Aluminum 11⁄2" 40 1.900"

Curved Pipe Sched. c142 Aluminum 11⁄4" 40 1.660"143 Aluminum 11⁄2" 40 1.900"

Ctsk. for #10 FHMS

3⁄4"

c

21⁄2"

11 ⁄16"

5 ⁄8"

11 ⁄4"

15⁄8"

Ctsk. for#10 FHMS3⁄3 4⁄4⁄ "

c

"

11 ⁄116⁄16⁄

"5 ⁄5

8⁄8⁄"11 ⁄1

4⁄4⁄"

8"

For center mounting of handrail mouldingonto Connectorail® posts

For center mounting of handrail pipeonto Connectorail® posts

Assembly DetailsAngle may be adjusted as required

CENTER POST BRACKETSMill FinishMill Finish

Bracket

Drive pinor screw

Handrail moulding 6905

#10 FHMS

Adjustablebracket flange

Post 11⁄2" Sch 40

Verify all dimensions before cutting.


CONNECTORAIL® SYSTEM INSTALLATION


EXPANSION JOINTSExpansion joints should be provided for continuous runs in excess of40' or at places where building structure provides expansion joints. Ifa joint is provided every 20', the width of the gap should allow 1⁄8"expansion for each 40°F of expected temperature rise. To make anexpansion joint, the internal connector sleeve is left unattached at oneend so that it is free to move in and out of the pipe.

TEE FITTINGSTee fittings are secured to the post or rail by means of an internallythreaded tubular rivet inserted into the wall of the pipe and a stainlesssteel machine screw and lock washer. When two 90° tees are mounteddirectly opposite each other to form a cross, a stainless steel throughbolt and lock nut may be used.

Drill pipe with drill size Q or 11⁄32" hole. Screw a rivet sleeve-side firstonto the mandrel of the tool. Hold the tool in one hand. Using the tool,insert the rivet into the hole until the tool comes to rest against the par-ent material. Upset rivet by pressing handles together.

distance between center line and edges of the rectangle. On the newlines, mark 1" above and below the horizontal center line. Wrap thetemplate around the post so that its horizontal center line is on a levelwith the intersection of center lines of the post and the rail. The markson the template will indicate the location of holes.

MOUNTING POSTSEmbedding in concrete: Posts embedded in concrete should be set toa depth of 5" below the surface of floor or tread. Allow for a 1" groutpad beneath post. Provide a hole 21⁄2" to 3" in diameter to leave roomfor grouting cement and to allow for adjustment to field variations. Aquick setting grout is recommended for setting posts. For outdoorinstallation, weep holes should be drilled in the posts just above theground. The reinforcing insert will prevent water from collecting belowground level. Where aluminum surfaces are embedded in concretethat contains corrosive components, a coat of zinc chromate primer orequivalent must be applied.

Surface Mounting: Sleeve anchor bolt 3⁄8" × 3" is recommended foruse with heavy-duty floor flange. Drill 3⁄8" hole in concrete or masonryto 3" depth. Drill holes which conform to ANSI standard carbide bitdimension (.390" to .398"). Clean out dust in hole after drilling. Insertsleeve bolt in hole, hand tighten, then tighten with wrench to a maxi-mum torque of 30 ft. lbs. Use heavy-duty floor flange as a template forlocating holes. Minimum distance from centerline of hole to edge ofconcrete is 2".Fascia Mounting: Disassemble the fascia flange, which includes areinforcing bar, by removing two screws from the back of the plate. Drilltwo 7⁄16" holes in the post, one hole 11⁄4" from the lower end, the secondone 4" on center from the first, so that they align with holes in the rein-forcing insert. The reinforcing insert is slipped inside the post and theunit is reassembled and mounted, using 3⁄8" bolts. While the unit is dis-assembled, the plate of the fascia flange may be used as a template tolocate the holes for mounting the flange.

For outdoor installation of aluminum, the metal must be kept fromdirect contact with concrete or dissimilar metal by application of bitu-minous paint or methacrylate lacquer.

ANODIZED FINISHESWhen clear anodized components are supplied, no further finishing isnecessary. Any other specified finishes are the fabricator’s responsi-bility and components will be supplied with mill finish only. All stain-less steel fasteners must be removed before anodizing.

1"

1"

Set tubular rivet in hole, usingsetting tool. Upset rivet bypressing handles together.

Draw the fitting up tight with a stainless steel screw and lock washer.

Draw the fittings up tightlyfrom both sides, using astainless steel lock nut.

Use reinforcing bar and coverflange. Drill weep hole 1⁄4" abovecover flange. Apply zinc chromateprimer or equivalent to surfacesembedded in concrete. Set in floorto a depth of 5" and grout.

Holes for angle tees, except 4° ramptee, are located 1" above and belowintersection of center lines of pipe,regardless of stair angle.

The use of a lock washer or lock nut is essential because theassembly must remain tight once it is completed. There is no way to re-tighten an assembled railing. Stainless steel screws are requiredbecause they provide maximum strength. The 1"-long screws are supplied with the lock washer already in place.

To locate holes to be drilled for angle tees and crosses, request ourdrilling template or make your own template as follows: Draw a rec-tangle of a width equal to the circumference of the pipe (5.21" for 11⁄4"pipe, 5.97" for 11⁄2" pipe), about 3" to 4" high. Draw the horizontal andvertical center lines. Draw two more vertical lines at one half the




BRONZE STAINLESS

CONNECTORAIL® SYSTEM INSTALLATIONJuliusBlum&Co.Inc.


INSTALLATION OF PICKET RAILSMost current safety codes require reduced openings in railings wherethey might present a hazard to small children. Pipe railings, includingthe Connectorail® System, are easily adapted to comply with thisrequirement, where it applies, by adding balusters or panels. Typicaldetails are shown on this page.

*Adapters 11⁄4" Pipe 11⁄2" PipeAluminum 7161 7261Bronze 8661 8861Stainless Steel 9161 9361

† Panel Clip—Aluminum only 11⁄4" Pipe 11⁄2" PipeAluminum 7160* 7260*Aluminum 7460 7560

* Two-piece panel clips, see page 19.

** Glass StopGlass Stop Snap-in

Aluminum, mill finish 8106 8107Aluminum, anodized 8206 8207Bronze 4506 4507Flexible PVC 8708

Tubularrivet

Channel

Baluster

Tubularrivet

Panel Clip †

Panel⁄ "14

Tubularrivet

Flat bar

Adapter *

Baluster

Tubularrivet

Snap in **

Adapter *

Flexible PVCchannel **

Panel

Glassstop **

Panel(by others)

Panel(by others)

AdaptersPANEL RAIL

PICKET RAIL – use channelor adapters and flat bar.

Panelclip

⁄ "14

⁄ "14

ALUMINUM STAINLESS

BRONZE PVC

INSTALLATION OF PANEL RAILS


weld

PIPE RAIL FITTINGS AND HANDRAIL PIPE



BRONZE STAINLESS CAST IRON / STEEL

d

c

b

Size Sched. O.D. Wall lb/ftAluminum 6063-T52 3⁄4" 40 1.050" .113" .391"Aluminum 6063-T52 1" 40 1.315" .133" .581"Aluminum 6063-T52* 11⁄4" 10 1.600" .109" .625"Aluminum 6063-T832* 11⁄4" 10 1.600" .109" .625"Aluminum 6063-T52* 11⁄4" 40 1.600" .140" .785"Aluminum 6063-T832* 11⁄4" 40 1.600" .140" .785"Aluminum 6063-T52* 11⁄2" 10 1.900" .109" .721"Aluminum 6063-T832* 11⁄2" 10 1.900" .109" .721"Aluminum 6063-T52* 11⁄2" 40 1.900" .145" .940"Aluminum 6063-T832* 11⁄2" 40 1.900" .145" .940"Aluminum 6063-T52 2" 40 2.375" .154" 1.264"Bronze C23000 11⁄4" 40 1.600" .146" 2.630"Bronze C23000 11⁄2" 40 1.900" .150" 3.130"Nickel-Silver C79800 11⁄2" 10 1.900" .109" 2.250"Stainless 304** 1" 40 1.315" .120" 1.460"Stainless 304** 11⁄4" 5 1.660" .062" 1.110"Stainless 304** 11⁄4" 40 1.660" .148" 2.150"Stainless 304**† 11⁄2" 5 1.900" .062" 1.274"Stainless 304** 11⁄2" 40 1.900" .148" 2.550"

* Mill or clear anodized finish** Cold rolled, Satin Finish #4† Also available 2B mill finish

CAST FLUSH FITTINGS FOR WELDED ASSEMBLYStainless fittings are furnished with a Satin Finish.Aluminum components are 6063 Alloy. Mill Finish.Cast aluminum components are of Almag 35. Satin Finish.Cast bronze fittings are lacquered bronze alloy (C86500) whichmatches the color of Red Brass (C23000) and Satin Finish.Cast nickel-silver components are lacquered nickel-silver alloywhich matches the color of nickel-silver (C79800). Satin Finish.Cast iron fittings are cast to match carbon steel (C1010).Fittings shown are made to fit standard pipe sizes.See pages 14 through 22 for other non-ferrous pipe fittings for 11⁄4" and 11⁄2" pipe.

PIPE COVER FLANGE

PIPE20" lengths, Smooth Mill Finish, except as noted

41⁄2"

6"

weld

41⁄2"

6"

OVAL POST FLANGE, FLOOR

OVAL POST FLANGE, ANGLE

Pipe927 Steel 11⁄4"928 Steel 11⁄2"

Pipe942 Steel 11⁄4"943 Steel 11⁄2"

Pipe Sched. b c d714 Aluminum 1" all .813" 1.34" 3.625"710 Aluminum 11⁄4" all 1" 1.69" 3.813"711 Aluminum 11⁄2" all 1" 1.94" 4"712 Aluminum 2" all 1" 2.41" 5"810 Bronze 11⁄4" all 1" 1.69" 3.810"811 Bronze 11⁄2" all 1" 1.94" 4"411 Nickel-Silver 11⁄2" all 1" 1.94" 4"214 Stainless 1" all 7⁄8" 1.34" 3.750"210 Stainless 11⁄4" all 7⁄8" 1.69" 3.750"211 Stainless 11⁄2" all 7⁄8" 1.94" 4.500"913 Pressed Steel 3⁄4" all 3⁄4" 1.08" 3.500"914 Pressed Steel 1" all 7⁄8" 1.34" 3.750"910 Pressed Steel 11⁄4" all 7⁄8" 1.69" 3.750"911 Pressed Steel 11⁄2" all 7⁄8" 1.94" 4.500"912 Pressed Steel 2" all 7⁄8" 2.41" 4.750"614 Cast Iron/Black 1" all .813" 1.34" 3.625"610 Cast Iron/Black 11⁄4" all .813" 1.69" 3.875"611 Cast Iron/Black 11⁄2" all .813" 1.94" 4.188"612 Cast Iron/Black 2" all .813" 2.41" 4.625"

1614 Cast Iron/Galv. 1" all .813" 1.34" 3.625"1610 Cast Iron/Galv. 11⁄4" all .813" 1.69" 3.875"1611 Cast Iron/Galv. 11⁄2" all .813" 1.94" 4.188"1612 Cast Iron/Galv. 2" all .813" 2.41" 4.625"


PIPE RAIL FITTINGSJuliusBlum&Co.Inc.



BRONZE STAINLESS MALLEABLE IRON / STEEL

FITTINGS FOR WELDED ASSEMBLYAll fittings are for I.P.S., schedule 40 pipe, except as noted.

TEESIn welded railings, no fittings are used for tee and cross connections.The ends of the pipe are notched with a special tool known as the ArcFit Pipe Notcher to match the contour of the pipe to be joined. Thejoint is then welded.

R

r

5 ⁄8"

1"

R

2"

R

R

1⁄8"

5 ⁄8"

1 5⁄8"R

rR

1⁄8" radius for sharp turns

For corner posts

c

5"

5"

r

ea

90° ELBOWS

90° ELBOWS

45° ELBOWS

90° THREE-WAY ELBOW

Pipe R958 Steel 11⁄4" 15⁄16"959 Steel 11⁄2" 11⁄16"258* Stainless 11⁄4" 15⁄16"259* Stainless 11⁄2" 11⁄16"

* Satin finish

Pipe Sched. c r7110 Aluminum 11⁄4" 10 1.660" 21⁄2"7210 Aluminum 11⁄2" 10 1.900" 3"7410 Aluminum 11⁄4" 40 1.660" 21⁄2"7510 Aluminum 11⁄2" 40 1.900" 3"8610* Bronze 11⁄4" 40 1.660" 21⁄2"8810* Bronze 11⁄2" 40 1.900" 3"1330C• Nickel-Silver 11⁄2" 10 1.900" 5"9310* Stainless 11⁄2" 5 1.900" 3"

* Satin finish • 8"x 8" edge to center line

Black Galv. Pipe a e617 1617 Malleable Iron 1" 15⁄16" 1"618 1618 Malleable Iron 11⁄4" 121⁄32" 11⁄4"619 1619 Malleable Iron 11⁄2" 129⁄32" 11⁄2"620 Malleable Iron 2" 23⁄8" 17⁄8"720* Aluminum 2" 23⁄8" 17⁄8"

* Satin finish

Pipe R232* Stainless 1" 211⁄16"225* Stainless 11⁄4" 213⁄16"226* Stainless 11⁄2" 215⁄16"915 Steel 1" 211⁄16"925 Steel 11⁄4" 213⁄16"926 Steel 11⁄2" 215⁄16"

* Satin finish

Pipe R948 Steel 11⁄4" 27⁄16"949 Steel 11⁄2" 29⁄16"

Pipe r R903 Steel 11⁄4" 1⁄8" 5⁄16"904 Steel 11⁄2" 1⁄8" 11⁄16"

Pipe r R929 Steel 1" 1" 111⁄16"930 Steel 11⁄4" 1" 113⁄16"933 Steel 11⁄4" 2" 213⁄16"931 Steel 11⁄2" 1" 115⁄16"934 Steel 11⁄2" 2" 215⁄16"932 Steel 2" 1" 23⁄16"

Pipe R917 Steel 1" 111⁄16"918 Steel 11⁄4" 113⁄16"919 Steel 11⁄2" 115⁄16"920 Steel 2" 2 3⁄16"

15⁄8" radius elbow is suitable for use as wall return

Detail showing 15⁄8" radius 90°elbow as wall return.

Weld and grind smooth


PIPE RAIL FITTINGS / PIPE NOTCHER




ARC-FIT PIPE NOTCHER FOR 90° TEE JOINTSThe Arc-Fit notches one side of the pipe end to match the contour of apipe of the same size. The pipe is then rotated 180° and the operationrepeated on the opposite side. The resulting notch forms a tee jointwithout burr or deformation, ready for welding.

This Arc-Fit unit consists of a #35 standard housing with the appro-priate punch and die assembly. Assemblies are interchangeable andare stocked for 3⁄4" to 2" standard pipe sizes. The spring loaded unitmay be operated in a power press—8 ton capacity; 6" shut height; 5⁄8"min. stroke—or the #1400 Arc-Fit hand press.

Punch and die assemblywith #35 housing

Arc-Fit hand press

ARC-FIT PIPE NOTCHER FOR ANGLE JOINTSNotching pipe for angle joints requires two die assemblies for each sizemounted in a #75AB Arc-Fit Double Housing and operated by a powerpress – 30 ton capacity; 6" shut height; 1" stroke. Since 35° is consid-ered an average for railing work, die assemblies are stocked for thatangle in 11⁄4" and 11⁄2" standard pipe sizes. Joint angle can be varied by a few degrees in assembly.

7⁄16" hole

h d39⁄16"

ea

7⁄16" hole

h d

e

a

7⁄16" hole

35⁄8"

e2"

Schedule 40 pipereturn and 1⁄8"formed flange arejoined by a con-cealed weld.

1400 Arc-Fit Hand Press35 Arc-Fit Standard Housing

9201 Punch & Die Assembly for 3⁄4" Pipe9202 Punch & Die Assembly for 1" Pipe9203 Punch & Die Assembly for 11⁄4" Pipe9204 Punch & Die Assembly for 11⁄2" Pipe9205 Punch & Die Assembly for 2" Pipe

r

31⁄2"

15⁄8"

7 ⁄16"

hol

e

c

5"

Pipe Sched. c r7173 Aluminum 11⁄4" 10 1.660" 21⁄2"7473 Aluminum 11⁄4" 40 1.660" 21⁄2"7273 Aluminum 11⁄2" 10 1.900" 3"7573 Aluminum 11⁄2" 40 1.900" 3"8673* Bronze 11⁄4" 40 1.660" 21⁄2"8873* Bronze 11⁄2" 40 1.900" 3"1373* Nickel-Silver 11⁄2" 10 1.900" 3"9373* Stainless 11⁄2" 5 1.900" 3"

* Satin finish

Pipe a d h e983 Steel 11⁄4" 121⁄32" 27⁄16" 15⁄8" 21⁄2"984 Steel 11⁄4" 121⁄32" 213⁄16" 15⁄8" 3"985 Steel 11⁄2" 129⁄32" 21⁄4" 115⁄32" 21⁄2"986 Steel 11⁄2" 129⁄32" 215⁄16" 115⁄32" 3"

Pipe e215F* Stainless 11⁄4" 21⁄2"216F* Stainless 11⁄4" 21⁄2"

* Satin finish

WALL RETURN

FITTINGS FOR WELDED ASSEMBLYAll fittings are for I.P.S., schedule 40 pipe, except as noted.

For schedule 40 pipeBlack Galv. Pipe a d h e604 1604 Cast Iron 11⁄4" 121⁄32" 115⁄16" 15⁄8" 21⁄2"664 1664 Cast Iron 11⁄4" 121⁄32" 115⁄16" 15⁄8" 3"605 1605 Cast Iron 11⁄2" 129⁄32" 21⁄16" 111⁄16" 21⁄2"665 1665 Cast Iron 11⁄2" 129⁄32" 21⁄16" 111⁄16" 3"For light wall structural pipe schedule 103604 Cast Iron 11⁄4" 121⁄32" 115⁄16" 15⁄8" 21⁄2"3605 Cast Iron 11⁄2" 129⁄32" 21⁄16" 111⁄16" 21⁄2"For schedule 40 pipe705* Aluminum 11⁄2" 129⁄32" 21⁄16" 111⁄16" 21⁄2"759* Aluminum 11⁄4" 121⁄32" 115⁄16" 15⁄8" 3"

* Satin finish

75AB Arc-Fit Double Housing9215 Punch & Die Assembly for 11⁄4" Pipe, 35° Angle9216 Punch & Die Assembly for 11⁄2" Pipe, 35° Angle


PIPE RAIL FITTINGSJuliusBlum&Co.Inc.


DRIVE-ON CAPS WELD-ON CAPS

CONNECTOR

PIPE PLUGS

TERMINAL CAPS

END CAPS

POST CAPS

1"

c

Pipe Sched. c7181 11⁄4" 10 1.660"7481 11⁄4" 40 1.660"7281 11⁄2" 10 1.900"7581 11⁄2" 40 1.900"

Pipe c707 11⁄4" 1.660"708 11⁄2" 1.900"807* 11⁄4" 1.660"808* 11⁄2" 1.900"

* Satin finish

Chamfer inside ofpipe to start; thendrive cap on

c

Sch. 40 only

Pipe Sched. c7180 Aluminum 11⁄4" 10 1.660"7480 Aluminum 11⁄4" 40 1.660"7280 Aluminum 11⁄2" 10 1.900"7580 Aluminum 11⁄2" 40 1.900"1330N* Nickel-Silver 11⁄2" 10 1.900"9380* Stainless 11⁄2" 5 1.900"

* Satin finish

Flat post caps are drilled and tapped to provide secure mounting for handrail brackets.

c

a

1"

3⁄8" 11⁄2"

For quick, weldless end-to-endconnection of pipe in the shop or inthe field. Connections made withthe pipe splice lock are flush, per-manent and in perfect alignment.Also suited for expansion joints.

m

m

3⁄4"

Weld and grind smooth. Use of connector is optional.

Chamfer inside ofpipe to start; thendrive cap on.

Connector snaps in placewith a spring fit, holdingelbow and pipe in positionfor welding.



Pipe m936 Steel 1" 1"937 Steel 11⁄4" 11⁄8"938 Steel 11⁄2" 11⁄4"939 Steel 2" 13⁄8"

Pipe277* Stainless 11⁄4"278* Stainless 11⁄2"

* Satin finish

For schedule 40 pipeBlack Galv. Pipe606 1606 Cast Iron 1"607 1607 Cast Iron 11⁄4"608 1608 Cast Iron 11⁄2"609 1609 Cast Iron 2"

For light wall structural pipe schedule 10Black Pipe3607 Cast Iron 11⁄4"3608 Cast Iron 11⁄2"

For light wall structuralFor schedule 40 pipe pipe schedule 10Steel Galv. Steel Stainless Steel Pipe921 289 1"922 1922 287 901 11⁄4"923 1923 288 902 11⁄2"924 2"

For schedule 5 pipe

286 11⁄4"

Pipe951 Steel 1"952 Steel 292 Stainless 11⁄4"953 Steel 293 Stainless 11⁄2"954 Steel 2"

Pipe a c715* Aluminum 11⁄4" 121⁄32" 27⁄32"716* Aluminum 11⁄4" 129⁄32" 31⁄32"

* Satin finish

c Nickel-Silver11⁄4"

c

Aluminum

1⁄2" tapped hole

11⁄4"

c

Stainless

1⁄2" tapped hole

PIPE SPLICE LOCKA single allen screw locks the joint

Pipe m906 Steel 1" 1"907 Steel 11⁄4" 11⁄8"908 Steel 11⁄2" 11⁄4"909 Steel 2" 13⁄8"

9⁄16"


PIPE RAIL FITTINGS


ALUMINUM

MALLEABLE IRON / STEEL

TOE BOARD20' lengths

TOE BOARD CLAMPS For 11⁄2" pipe

Assembly Details

31⁄2" 13⁄4"

37 ⁄8"

2"2"

Drilled for 1⁄4" SHMS6446 Alum. 1.13 lb/ft

746 Aluminum 747* Aluminum

*Alloy 6063-T52 Mill Finish or

clear anodized

5⁄8"

1 ⁄2"

11⁄8"

4"

15⁄32"

215⁄32"

a

e

h

Square post fittings usedwith 4" or larger post

Square post fittings usedwith 31⁄2" or smaller post

Square post fittings are made reversible so as to allow enough clear space betweenascending and descending pipe rails regardless of size of post.

SQUARE POST FITTINGCast

Square Post Fitting Assembly Detail

b1⁄4"

a

Toe board

May be notchedto allow forclearance aroundbase or flange.

1⁄4" × 1⁄2" RHMS

Clamp

11⁄2" pipe

Storage for removablesocket cover 788

Outside Corner

Inside Corner

Toe board clamps are supplied with stainless steel screws and nuts.

Captain Rodger W. Wheeler State Beach, Point Judith, Rhode IslandArchitect: William L. Burgin/William L. BurginFabricator: Continental Bronze Division of Offenhauser, Houston, TX

SQUARE POST FITTINGStamped Steel

For schedule 40 pipePipe a h e

601 Malleable Iron 11⁄4" 121⁄32" 3⁄8" 29⁄64"602 Malleable Iron 11⁄2" 129⁄32" 7⁄16" 33⁄64"

For light wall structural pipe schedule 103601 Malleable Iron 11⁄4" 121⁄32" 3⁄8" 29⁄64"3602 Malleable Iron 11⁄2" 129⁄32" 7⁄16" 33⁄64"For schedule 40 pipe701* Aluminum 11⁄4" 121⁄32" 3⁄8" 29⁄64"702* Aluminum 11⁄2" 129⁄32" 7⁄16" 33⁄64"

* Satin finish

For schedule 40 pipePipe a b

987 Malleable Iron 11⁄4" 15⁄8" 25⁄8"



BRONZE STAINLESS

O.D. TUBING AND FITTINGSJuliusBlum&Co.Inc.



BRONZE STAINLESS

d

c

b

COVER FLANGE

END CAPSSatin finish, except as noted

90˚ RADIUS ELBOWSatin Finish, except as noted

CONNECTOR SLEEVESAluminum, 5" lengths

OD t lb/ft Area I S

Aluminum 1.900" .109" .721 .614 .247 .260Aluminum 21⁄2" .125" 1.119 .933 .659 .527Aluminum 3" .125" 1.328 1.129 1.169 .779Aluminum 31⁄2" .125" 1.559 1.325 1.890 1.080Bronze 1.500" .100" 1.750 .440 .108 .144Bronze 1.900" .100" 2.070 .565 .230 .242Bronze 21⁄2" .125" 3.441 .933 .659 .527Bronze 3" .125" 4.500 1.129 1.169 .779Bronze†† 31⁄2" .125" 4.850 1.325 1.890 1.080Nickel-Silver 1.500" .100" 1.750 .440 .108 .144Nickel-Silver 1.900" .109" 2.250 .614 .247 .260Nickel-Silver† 21⁄2" .125" 3.400 .933 .659 .527Nickel-Silver† 3" .125" 4.500 1.129 1.169 .779Stainless Steel** 1.900" .062" 1.274 .375 .158 .166Stainless Steel 21⁄2" .062" 1.691 .479 .356 .285Stainless Steel 3" .062" 1.930 .577 .622 .415Stainless Steel 4" .062" 2.550 .804 1.556 .778

** No. 4 Satin Finish and Mill Finish † 16' lengths †† 12' lengths

t

OD

O.D. ROUND TUBING 20' lengths, except as notedMill finish only, except as noted

Aluminum 6063-T52Bronze C38500Nickel-Silver C79800Stainless Type 304

b a

a b7280* Aluminum 1⁄8" 1.900"1180* Aluminum 1⁄8" 21⁄2"1182* Aluminum 1⁄8" 3"1181* Aluminum 1⁄8" 31⁄2"1282 Bronze 1⁄4" 1.900"1280 Bronze 1⁄4" 21⁄2"1283 Bronze 1⁄4" 3"1281 Bronze 1⁄4" 31⁄2"6489N Bronze 1⁄4" 1.500"6489D Bronze • 1.500"5289N Nickel-Silver 1⁄4" 1.500"1330N Nickel-Silver 1⁄4" 1.900"1332N Nickel-Silver 1⁄4" 21⁄2"1333N Nickel-Silver 1⁄4" 3"9380 Stainless 1⁄8" 1.900"1480 Stainless 1⁄8" 21⁄2"1482 Stainless 1⁄8" 3"1473N Stainless 1⁄8" 4"

* Mill Finish • Dome-shaped; extends 1" beyond end of tube.

OD b c d711 Aluminum 1.900" 1" 1.94" 4"

1125 Aluminum 21⁄2" 1" 2.54" 43⁄4"1123 Aluminum 3" 1" 3.04" 5"811 Bronze 1.900" 1" 1.94" 4"

1225 Bronze 21⁄2" 1" 2.54" 43⁄4"1223 Bronze 3" 1" 3.04" 5"411 Nickel-Silver 1.900" 1" 1.94" 4"

1325 Nickel-Silver 21⁄2" 1" 2.54" 43⁄4"1323 Nickel-Silver 3" 1" 3.04" 5"211 Stainless 1.900" 7⁄8" 1.94" 41⁄2"

1425 Stainless 21⁄2" 11⁄16" 2.54" 47⁄8"1423 Stainless 3" 17⁄16" 3.04" 61⁄8"

a7063 for 6489 Bronze and 5289 Nickel-Silver 1.500"1363 for 1.900" Nickel-Silver 1.650"1160 for 1.900" Aluminum and 1.900" Bronze 1.682"1163 for 21⁄2" Aluminum, 21⁄2" Bronze and 21⁄2" Nickel-Silver 2.250"1170 for 3" Aluminum, 3" Bronze and 3" Nickel-Silver 2.750"1164 for 31⁄2" Aluminum 3.250"9363 for 1.900" Stainless 1.770"1463 for 21⁄2" Stainless 2.375"1464 for 3" Stainless 2.875"1264 for 31⁄2" Bronze 3.125"1474 for 4" Stainless 3.875"

a

Handrail sectionSerrated fordrive fit intohandrail section

Fasten with Scotch-Weld® Adhesive

Elbow may betrimmed for use aswall return. For brackets seepages 88-90

a

b

r

b

a r Wall b

7210* Aluminum 1.900" 3" .109" 2"1110* Aluminum 21⁄2" 5" .125" 21⁄2"1120* Aluminum 3" 5" .125" 21⁄2"1122* Aluminum 31⁄2" 5" .125" 21⁄2"1222 Bronze 1.900" 3" .100" 21⁄2"1210 Bronze 21⁄2" 5" .125" 21⁄2"1220 Bronze 3" 6" .125" 21⁄2"6489C* Bronze 1.500" 3" .100" 21⁄2"1330C* Nickel-Silver 1.900" 5" .109" 21⁄2"1332C* Nickel-Silver 21⁄2" 5" .125" 21⁄2"1333C* Nickel-Silver 3" 5" .125" 21⁄2"9310 Stainless 1.900" 3" .062" 2"1410 Stainless 21⁄2" 5" .062" 21⁄2"1420 Stainless 3" 5" .062" 21⁄2"

* Mill Finish1330N 6489D


TRADITIONAL RAILING COMPONENTS


HANDRAIL MOULDINGS, FITTINGS AND CASTINGS

between extruded handrail and cast fittings, butt joints usually requirespecial attention to assure proper match.

All items are carried in stock in substantial quantities and are nor-mally available for immediate shipment. Materials are produced andhandled with great care. Items are thoroughly protected for shipmentby wrapping and/or crating so as to assure a product well-suited forarchitectural finishing. For structural engineering data, see pages 123-130. For handrail brackets, see pages 86-95.

Americans with Disabilities Act (ADA): The Americans withDisabilities Act adopted by Congress in 1992 required handrails to be11⁄4" minimum and 11⁄2" maximum. However, the ADAAG Manual—July 1998, published by US Architecture and Transportation BarriersCompliance Accessibility Guidelines, has now clarified the intent ofthe dimensional requirements to be 11⁄4" minimum to a nominal 2"maximum. It is important to note that Section 4.26.2 Size and Spac-ing of Grab Bars and Handrails of the ADAAG Manual states in part,“Standard IPS pipe designated by 11⁄4" to 11⁄2" is acceptable.”

ADAAG also allows handrails which provide an equivalent grippingsurface. ANSI117.1-98 defines this alternative: equivalent gripping surfaces are permitted provided they have a perimeter dimension of 4" (100mm) minimum and 61⁄4" (16mm) maximum and provided theirlargest cross-section dimension is 21⁄4" (57mm) maximum.

This section illustrates the numerous handrail mouldings, fittings, andornamental railing components carried in stock in aluminum, bronze,nickel-silver, steel, and stainless steel. Most can be used with the var-ious railing systems described elsewhere in this catalog.

Aluminum extrusions are of alloy 6063 which is preferred for itsbright color, corrosion resistance, and ease of fabrication. It is suitablefor anodizing, including most of the hard coat color finishes.

Bronze extrusions are of alloy C38500, architectural bronze,preferred for its rich gold color and workability.

Nickel-Silver extrusions are of alloy C79800. Sometimes referredto as white bronze, nickel-silver is a copper/nickel alloy. It is similar incolor to stainless steel, with golden highlights.

Stainless Steel components are of type 304, 18-8, chromenickel alloy which has high resistance to corrosion.

Steel handrails are hot-rolled carbon steel, C1010.Cast aluminum fittings are produced from Almag 35, suitable for

clear anodizing. Bronze castings are of alloy C86500 for a good colormatch with extruded bronze. Nickel-silver fittings are cast to matchextrusions. All non-ferrous fittings are satin finished; bronze and nickel-silver fittings are protected with a clear lacquer. Fittings for use withsteel handrail are cast from malleable iron which is weldable and bend-able. It is important to be aware that due to the difference in tolerances

HANDRAIL MOULDINGSA wide selection of handrail mould-ings are available from stock inaluminum, bronze, nickel-silver,stainless steel and steel. Match-ing fittings are available for manyhandrail profiles.

POSTS AND ORNAMENTALBALUSTER BARSOrnamental baluster bars are avail-able in 36" and 42" lengths. Postsare produced from solid stock.Baluster bars may be combinedto meet 4" space requirements.

POST CAPS, COLLARS,FINIALSA variety of post caps, collars, andfinials are available in aluminum,bronze, nickel-silver, stainlesssteel, and steel to meet a varietyof design applications.

Private Residence Fabricator: Klahm & Sons, Inc., Ocala, FL


HANDRAIL MOULDINGSJuliusBlum&Co.Inc.


ALUMINUM

21⁄8"

15⁄16"19⁄16"

13⁄4"

11⁄16"15⁄16"

21⁄4"

15⁄16"19⁄16"

21⁄4"

5⁄16"

19⁄16"

6931 Aluminum .615 lb/ftFittings: B-C-CC-CL-CR-E-GL-GR-L-N-S-T-V



6933 Aluminum .770 lb/ftFittings: B-C-CC-CL-CR-GL-GR-N-S-V

6935 Aluminum .980 lb/ftFittings: B-C-CC-CL-CR-E-GL-GR-N-S-T-V

6984* Aluminum 1.301 lb/ftFittings: C-N* Use 11⁄2"×1⁄4" flat bar for splicing and for closing ends

6985* Aluminum .977 lb/ftFittings: C-N* Use 11⁄2"×1⁄4" flat bar for splicing and for closing ends

6901 Aluminum 1.661 lb/ftFittings: C-N



6907 Aluminum 1.776 lb/ftFittings: C-NMouldings 6905, 6906 and 6907 are speciallydesigned for use with Carlstadt® self-aligning brack-ets shown on pages 80–81. A 3⁄4" × 3⁄16" flat bar may beused for closing the recess in the handrail moulding.

6902 Aluminum 1.464 lb/ftFittings: C-NMouldings 6901 and 6902 are specially designed foruse with Carlstadt® aluminum self-aligning brackets309, 312, 313 and 314 shown on pages 80 and 81. A 1" × 1⁄4" flat bar can be used for splicing and for closing the recess in the handrail moulding.

6402 Aluminum 1.51 lb/ftFittings: C-N (Use fittings for 6902)

6405 Aluminum 1.39 lb/ftFittings: C-N (Use fittings for 6985)

6407 Aluminum 2.00 lb/ftFittings: C-N (Use fittings for 6907)T-handrail mouldings 6402, 6405 and 6407 are usedwith Carlstadt® self-aligning brackets on pages 80–81.Clamping action eliminates drilling and tapping andhelps in field alignment with posts and wall attachment.

6530 Aluminum .900 lb/ftFittings: C-N (see page 40)

6531 Aluminum .600 lb/ftFittings: C-N (see page 40)

6532 Aluminum 1.440 lb/ftFittings: C-N (see page 40).Mouldings 6530, 6531 and 6532 are used with Carlsrail® self-aligning brackets on page 67. Clampingaction eliminates drilling and tapping and helps in fieldalignment with posts and wall attachments. See page66 for splices, support bar and end cap. Carlsrail®

mouldings are designed for non-welded assembly.

6929 Aluminum .670 lb/ftFittings: B-C-CC-CL-CR-E-GL-GR-L-N-S-T-VOutside profile identical to 6930, for straight runs only

23⁄4"117⁄32"

2"117⁄32"

11⁄2"

3⁄4"

Note: Channel Corner bends and channel lateralscrolls are available in Aluminum and Malleable Iron.

11⁄16"15⁄8"

11⁄16"

115⁄16"15⁄16"

23⁄8"

11 ⁄4"

ALUMINUM Alloy 6063-T52, Mill Finish, 20' lengths

2"

15 ⁄16"

15 ⁄16"

31⁄4"

2"

3⁄4"

21⁄2"

3⁄4"1"

11⁄32"23⁄8"

11⁄32"25⁄8"

25⁄32"

9 ⁄16"

31⁄4"

25⁄32"

9 ⁄16"

31⁄4"

25⁄32"

11⁄16

"33⁄4"

Scale: 6" = 1'-0"


HANDRAIL MOULDINGS


ALUMINUM

23⁄4"

1⁄2"

19⁄32"

23⁄4"

5⁄16"

21⁄16"

3"

11 ⁄4"

x

y.125"

27⁄8"

1⁄4"

21⁄8"

23/4"

11 /4" .125"

23⁄4"

11 ⁄4"

.125"

13⁄4"11⁄32"

7⁄16"

Scale: 6" = 1'-0"

11⁄2"

3⁄4"

11 ⁄4"

25 ⁄8"

21⁄2"

3⁄4"

11 ⁄4"

11 ⁄2"

2"

3⁄4"

.125"

11 ⁄4"

6"11 ⁄4

"t

ab

ALUMINUM Alloy 6063-T52, Mill Finish, 20' lengths

6932 Aluminum .852 lb/ftFittings: B-C-N-S-V

1133* Aluminum 3.02 lb/ft






* No fittings available


6987 Aluminum .858 lb/ftFittings: C-N

6903* Aluminum .446 lb/ftUse with 1"×1⁄2"×1⁄8" channel

6904* Aluminum .858 lb/ftUse with 11⁄4"×3⁄4"×1⁄8" channel

6434 Aluminum 6063-T6 1.123 lb/ftFittings: N (see page 79)

6435 Aluminum 6063-T6 1.075 lb/ftFittings: C-N (see pages 40 and 79)6435 Aluminum 6063-T6 1.075 lb/ft

6437 Aluminum 1.057 lb/ftFittings: N

1136 Aluminum 2.70 lb/ftFittings: N

a b t lb/ft1130 1.900" 3⁄4" .109" 1.011132 21⁄2" 3⁄4" .125" 1.521137 3" 3⁄4" .125" 1.721154 3" 1" .125" 1.731135 31⁄2" 3⁄4" .125" 1.951155 31⁄2" 1" .125" 1.97Fittings: See page 8. Not to scale

11⁄4"

11 ⁄4"

23⁄4"

11 ⁄4"

21⁄2"

3 ⁄4"

2"

1 ⁄2"

3"

3 ⁄4"

23⁄16"

13 ⁄16".125"

6436 Aluminum .888 lb/ftFittings: N

JB® GLASS HANDRAIL MOULDINGS


Scale: 6" = 1'-0"

BRONZE Alloy C38500, Mill Finish, 20' lengths, except as noted

handrail MOUldinGS


BRONZE

11⁄2".100"

11⁄16" 15⁄8"

JB®GLASSHANDRAILMOULDINGS

2"

.100

"

x

y

½"

2"

.100

"

½"

2"

.100"

1⁄2"

c

t

a3⁄4"

115⁄16"15⁄16"

For straight runs only. Outside profile identical to 45344536 Bronze 1.83 lb/ft

Fittings: Same as for 4534.

Suitable for bending4531 Bronze 1.93 lb/ft

Fittings: B-C-CC-CL-CR-E-GL-GR-L-N-S-U-V

11⁄16"15⁄8"


Fittings: Same as for 4531

11⁄16"

115⁄16"15⁄16"

Suitable for bending.4534 Bronze 2.52 lb/ft

Fittings: B-C-CC-CL-CR-E-GL-GR-L-N-S-T-V

21⁄4"

15⁄16"11⁄2"

Suitable for bending.4530 Bronze 2.91 lb/ft

Fittings: B-C-CC-CL-CR-E-GL-GR-L-N-S-T-V

21⁄4"19⁄16"

11⁄32"


Fittings: Same as for 4530.

23⁄4" 19⁄16"

111⁄16"

4538 Bronze 3.10 lb/ftFittings: N

2¾"

2¾" 19⁄32"

19⁄32"

117⁄32"

117⁄32"

4574 Bronze 3.71 lb/ftFittings: C-N

2"

19⁄32"

117⁄32"

2" 19⁄32"117⁄32"

4575 Bronze 2.64 lb/ftFittings: C-CC-N

1¾"

11⁄16"15⁄16"

1¾" 11⁄16"15⁄16"

4539 Bronze 2.66 lb/ftFittings: B-C-CC-CL-CR-GL-GR-N-S-V

21⁄8"

15⁄16"19⁄16"

21⁄8" 15⁄16"19⁄16"

4535 Bronze 3.16 lb/ftFittings: B-C-CC-CL-CR-GL-GR-N-S-T-V

25⁄32"

7⁄16"

21⁄4"


25⁄32"

1⁄2"

23⁄4"


23⁄4" 19⁄16"

27⁄16 "

4533 Bronze 3.66 lb/ftNo fittings

6489 Bronze 1.75 lb/ftFittings: C-D-N

a c t lb/ft1233* Br. 3" 1¼" .125" 5.871235** Br. 3½" 1¼" .187" 8.70

Fittings: See page 8. Not to scale.

* 16' lengths ** 12' lengths

6488* Bronze 1.56 lb/ftFittings: N

a b c t lb/ft1230 Br. 1.900" ½" 1" .100" 2.691232* Br. 2½" 3⁄8" 1" .125" 4.51

Fittings: See page 8. Not to scale.

* 16' lengths

c

t

a

b

¾"



1½"

5⁄8"

13⁄16"

4503

1½"

5⁄8"

13⁄16"

HANDRAIL MOULDINGS


NICKEL-SILVER

Note: Channel Corner Bends and Channel Lateral Scrolls are available in Nickel-Silver andMalleable Iron.

a c t lb/ft1330 Nickel-Silver 1.900" 1" .125" 2.741332* Nickel-Silver 21⁄2" 11⁄4" .125" 4.431333* Nickel-Silver 3" 11⁄4" .125" 5.28Fittings: See page 8. Not to scale. * 16' lengths

23⁄4"19⁄16"

111⁄16

"

21⁄8"

15⁄16"19⁄16"

23⁄4"

19⁄32"117⁄32"

5235 Nickel-Silver 3.16 lb/ftFittings: B-C-CC-CL-CR-GL-GR-N-S-V

5274 Nickel-Silver 3.71 lb/ftFittings: C-N

1334* Nickel-Silver 3.40 lb/ftFittings: N (See page 79) * 16' lengths

c

t

a3⁄4"

21⁄4"

15⁄16"19⁄16"

5530 Nickel-Silver 2.91 lb/ftFittings: B-C-CC-CL-CR-GL-GR-N-P-S-V

2"

.100

"

1 ⁄2"

5288 Nickel-Silver 1.56 lb/ftFittings: N

3⁄4"

7 ⁄16"

21⁄4"

5572 Nickel-Silver 2.50 lb/ftFittings: C-N



11 ⁄2".100"

23⁄4"

11 ⁄4".125"

11⁄16"

115⁄16"15⁄16"

5534 Nickel-Silver 2.52 lb/ftFittings: B-C-CC-CL-CR-GL-GR-N-S-V

Scale: 6" = 1'-0"

NICKEL-SILVER Alloy C79800, Mill Finish, 20' lengths, except as noted

JB® GLASS HANDRAIL MOULDINGS


HANDRAIL MOULDINGSJuliusBlum&Co.Inc.


ALUMINUM

ACRYLIC / WOOD

33⁄4"

17 ⁄8"

13⁄4"

31 ⁄2"

15⁄8"

51 ⁄2"

15⁄8"

51 ⁄2"

Acrylic/Wood rail is a prefinished compositematerial which retains all the beauty of naturalhardwood—oak, walnut and ash—but is pro-vided with a hard, lustrous acrylic surface. Thisis achieved by impregnating the wood withacrylic plastic and hardening it by irradiation.The composite has twice the resistance toindentation and several times the resistance toabrasion as the same hardwood finished con-ventionally. Acrylic/Wood is laminated fromstrips so as to obtain greater strength and con-tinuous, uniform lengths.

DOWEL

ACRYLIC/WOOD16' lengths

8521 Oak Acrylic/Wood3.48 lb/ft

8522 Walnut Acrylic/Wood3.48 lb/ft

8523 Ash Acrylic/Wood3.48 lb/ft


800 Aluminum For use with Acrylic/Wood handrail


8571 Oak Acrylic/Wood /Aluminum 3.34 lb/ft

Fittings: N (874)

Aluminum spine has a clear anodized finish. AA-M10-C22-A31 (204R1.)

Approximate color andgrain configurationsAsh color may be substi-tuted for maple or birch.

3" 5⁄16"

SCOTCH-WELD® EPOXY ADHESIVECatalog No. 3M EC-2216 B/A, Clear Amber Recommended for splice joints using aluminum dowel.

Cans—1 qt. total Tubes—4 oz. total

2"

3⁄3 4⁄4⁄ "

6"

1 ⁄14⁄4⁄"

8662 Oak Acrylic/WoodFittings: N 4.27 lb/ft

15⁄8"

71 ⁄2"



Walnut

Ash

Oak

Scale: 6" = 1'-0"


37

handrail MOUldinGS


STAINLESS

STEEL

1Ł"1Ð"

1ý"

1Ł"1Š"2¼"

2"

1Ł"1Š"2Þ"

4429 Prime Domestic Steel 1.50 lb/ftFittings: B-C-CC-CL-CR-E-F-GL-GR-JL-JR-L-N-S SL-SR-T-U-UC-UL-V

4441 Steel 2.14 lb/ftFittings: B-C-CC-CL-CR-E-GL-GR-N-S-V

4435 Steel 2.65 lb/ftFittings: V

4416 Steel 3.15 lb/ftNo fittings available

401 Steel

4428 Steel 2.25 lb/ftFittings: B-C-CC-CL-CR-E-GL-GR-L-N-S-V

1Ð"1¾"

4429 used with 1" channel

4445 Steel .688 lb/ftLoafer rail fits over pipe or flat surface to discouragelounging or skating on fences, planters, railings, or storefronts.

LoaferRail

¾"½"

2¾"

¾"

b

a

¾"ł"

2¼"

6502 Stainless 2.80 lb/ftNo fittings available. 16' lengths

6501 Stainless 4.05 lb/ftNo fittings available. 16' lengths

2"

.062"½"

½"

½"

2" .062"

2"

.062

"

x

y4488 Stainless .944 lb/ftFittings: N Suitable for elevator cab handrails

1¼"

1¼"

Š"

Š"

23⁄32"

23⁄32"6503 Stainless 2.54 lb/ftNo fittings available. 16' lengths

.062"

a¾"

1¼"

RoundTubingOrnamental Grade

.062"

OD

HandrailPipeOrnamental GradeNo. 4, 180 grit, satin finish; paper-wrapped.

Nominal Pipe Size Sched. OD t lb/ft¾”" 40 1.063" .113" 1.2001" 40 1.315" .120" 1.4601¼" 5 1.660" .062" 1.1101¼" 40 1.660" .148" 2.1501½" 5 1.900" .062" 1.2741½" 40 1.900" .148" 2.550Fittings, see pages 14-29.

* Also available 2B mill finish

OD ID lb/ft2½" 2.375" 1.6913" 2.875" 1.9304" 3.875" 2.550Fittings: See page 30.

a lb/ft Finish1430* 1.900" 1.70 No. 2B1432* 2½" 1.96 No. 2B1452** 2½" 1.96 No. 41433* 3" 2.46 No. 2B1453** 3" 2.46 No. 41472* 4" 3.17 No. 2B1473** 4" 3.17 No. 4Fittings, see page 8.

* Suitable for polishing ** 180 Grit

STEELC1010,20' lengthsSteel mouldings are hot-rolled carbon steel, C1010. Fittings are cast in malleable iron, making them weldable and bendable.

STAINLESSSTEELType 304 (18-8)20' lengths, except as noted

JB®GLASSHANDRAILMOULDINGS

2¾"

.062"ł"

ł"

a

.062"ł"

2¾" .062"

6511 Stainless 1.25 lb/ftFittings: N

6512 Stainless 1.00 lb/ftFittings: N

Scale: 6" = 1'-0"

2¼"

2¼"

.062"ł"

ł"

.062"

WallFlangeð"

3Þ"

2ž"

Hole for þ" bolt

Hole for þ" bolt

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD

HANDRAIL FITTINGSJuliusBlum&Co.Inc.



BRONZE MALLEABLE IRON / STEEL

Moulding lateral scrolls may be bent to meet the pitch of stair railings. Cast channel and steel flat bar scrolls fit the underside of moulding lateralscrolls. They may be punched for round or square balusters. Malleable Iron produced in “As Cast” Finish.

Junior Lateral Scrolls Junior Lateral “a” Dimension 41⁄8"

4429SL Malleable Iron 4429SR Malleable Iron

Fittings Availability Chart

Satin Finish, except as noted. Bronze and Nickel-Silver fittings are lacquered. Be aware that due to the difference in tolerancesbetween extruded handrail and cast fittings, butt joints usually require special attention to assure a proper match.

a

a 150P Flat Bar Lateral Scrolls

Junior Channel Lateral Scrolls

JL Left Junior Channel ScrollJR Right Junior Channel Scroll

w h t100JL Malleable Iron 1" 1⁄2" 1⁄8"100JR Malleable Iron 1" 1⁄2" 1⁄8"

Flame cut from steel plate, matches:

4530GL/GR Bronze5530GL/GR Nickel-Silver4441GL/GR Malleable Iron

GL/SL Left Lateral Scrolls

GR/SR Right Lateral Scrolls For Lateral Scroll size and availability, see chart below.

MOULDING LATERAL SCROLLSSatin Finish, except as noted.

Bevel Lamb’s Straight Lamb’sHandrail Moulding Tongue (B) Tongue (S) Volute (V) Terminal End Piece (E) Corner Piece (L)

6929 Aluminum 6930B Aluminum 6930S Aluminum 6930V Aluminum 6930E Aluminum 6930L Aluminum6930 Aluminum 6930B Aluminum 6930S Aluminum 6930V Aluminum 6930E Aluminum 6930L Aluminum6931 Aluminum 6931B Aluminum 6931S Aluminum 6931V Aluminum 6931E Aluminum 6931L Aluminum6932 Aluminum 6932B Aluminum 6932S Aluminum 6932V Aluminum – –6933 Aluminum 6933B Aluminum 6933S Aluminum 6933V Aluminum – –6934 Aluminum 6934B Aluminum 6934S Aluminum 6934V Aluminum 6934E Aluminum 6934L Aluminum6935 Aluminum 6935B Aluminum 6935S Aluminum 6935V Aluminum 6935E Aluminum –4530 Bronze 4530B Bronze 4530S Bronze 4530V Bronze 4530E Bronze 4530L Bronze4531 Bronze 4531B Bronze 4531S Bronze 4531V Bronze 4531E Bronze 4531L Bronze4532 Bronze 4530B Bronze 4530S Bronze 4530V Bronze 4530E Bronze 4530L Bronze4534 Bronze 4534B Bronze 4534S Bronze 4534V Bronze 4534E Bronze 4534L Bronze4535 Bronze 4535B Bronze 4535S Bronze 4535V Bronze – –4536 Bronze 4534B Bronze 4534S Bronze 4534V Bronze 4534E Bronze 4534L Bronze4537 Bronze 4531B Bronze 4531S Bronze 4531V Bronze 4531E Bronze 4531L Bronze4539 Bronze 4539B Bronze 4539S Bronze 4539V Bronze – –4428* Steel 4428B Malleable Iron 4428S Malleable Iron 4428V Malleable Iron 4428E Mal. Iron 4428L Mal. Iron4429* Steel 4429B Malleable Iron 4429S Malleable Iron 4429V Malleable Iron 4429E Mal. Iron 4429L Mal. Iron4435* Steel – – 4435V Malleable Iron – –4441* Steel 4441B Malleable Iron 4441S Malleable Iron 4441V Malleable Iron 4441E Mal. Iron –5235 Nickel-Silver 5235B Nickel-Silver 5235S Nickel-Silver 5235V Nickel-Silver – –5530 Nickel-Silver 5530B Nickel-Silver 5530S Nickel-Silver 5530V Nickel-Silver – –5534 Nickel-Silver 5534B Nickel-Silver 5534S Nickel-Silver 5534V Nickel-Silver – –

* All steel fittings are produced in Malleable Iron in an “As Cast” Finish.


HANDRAIL FITTINGS




4429 Steel

11⁄16"13⁄4"


100JL 100JR 4429SL 4429SR 4429F 4429U 4429UC 4429UL

Left Junior Right Junior Left Junior Right Junior Forged Channel Lateral Channel Lateral Lateral Lateral Lamb’s End Urn Center Urn Corner Urn

Scroll (JL) Scroll (JR) Scroll (SL) Scroll (SR) Tongue (F) Base (U) Base (UC) Base (UL)

w h t600CL/CR Aluminum 1" 1⁄2" 1⁄8"400CL/CR Bronze 1" 1⁄2" 1⁄8"100CL/CR Malleable Iron 1" 1⁄2" 1⁄8"

w h t615CL/CR Aluminum 11⁄4" 1⁄2" 1⁄8"425CL/CR Bronze 11⁄4" 1⁄2" 1⁄8"1315CL/CR Nickel-Silver 11⁄4" 1⁄2" 1⁄8"125CL/CR Malleable Iron 11⁄4" 1⁄2" 1⁄8"

w h t650CL/CR Aluminum 11⁄2" 1⁄2" 1⁄8"450CL/CR Bronze 11⁄2" 1⁄2" 1⁄8"1350CL/CR Nickel-Silver 11⁄2" 1⁄2" 1⁄8"150CL/CR Malleable Iron 11⁄2" 1⁄2" 1⁄8"

Channel corner bends are also available in aluminum, bronze, nickel-silver, and malleable iron.

CHANNEL LATERAL SCROLLSMalleable Iron, Bronze, and Aluminum (Nickel-Silver not shown).

Non-Ferrous Lateral “a” Iron Flat BarCenter Piece (T) End Urn Base (U) Lateral Scroll (GL/GR) Channel Lateral** (CL/CR) Dimension Channel Lateral (CL/CR/P)

6930T Aluminum – 6930GL/GR Aluminum 650CL/CR Aluminum 63⁄8" 150CL/CR Mal. Iron6930T Aluminum – 6930GL/GR Aluminum 650CL/CR Aluminum 63⁄8" 150CL/CR Mal. Iron6931T Aluminum – 6931GL/GR Aluminum 600CL/CR Aluminum 59⁄16" 100CL/CR Mal. Iron

– – – – – –– – 6933GL/GR Aluminum 615CL/CR Aluminum 57⁄16" 125CL/CR Mal. Iron

6934T Aluminum – 6934GL/GR Aluminum 615CL/CR Aluminum 51⁄2" 125CL/CR Mal. Iron6935T Aluminum – 6935GL/GR Aluminum 650CL/CR Aluminum 63⁄8" 150CL/CR Mal. Iron4530T Bronze – 4530GL/GR Bronze 450CL/CR Bronze 63⁄8" 150CL/CR/P Mal. Iron

– 4531U Bronze 4531GL/GR Bronze 400CL/CR Bronze 59⁄16" 100CL/CR Mal. Iron4530T Bronze – 4530GL/GR Bronze 450CL/CR Bronze 63⁄8" 150CL/CR/P Mal. Iron4534T Bronze – 4534GL/GR Bronze 425CL/CR Bronze 51⁄2" 125CL/CR Mal. Iron4535T Bronze – 4535GL/GR Bronze 450CL/CR Bronze 63⁄8" 150CL/CR Mal. Iron4534T Bronze – 4534GL/GR Bronze 425CL/CR Bronze 51⁄2" 125CL/CR Mal. Iron

– 4531U Bronze 4531GL/GR Bronze 400CL/CR Bronze 59⁄16" 100CL/CR Mal. Iron– – 4539GL/GR Bronze 425CL/CR Bronze 57⁄16" 125CL/CR Mal. Iron– – 4428GL/GR Malleable Iron – 51⁄2" 125CL/CR Mal. Iron

4429T Mal. Iron 4429U Mal. Iron 4429GL/GR Malleable Iron – 55⁄8" 100CL/CR Mal. Iron– – – – – –– – 4441GL/GR Malleable Iron – 61⁄8" 150CL/CR/P Mal. Iron– – 5235GL/GR Nickel-Silver 1350CL/CR Nickel-Silver 63⁄8" 150CL/CR Mal. Iron– – 5530GL/GR Nickel-Silver 1350CL/CR Nickel-Silver 63⁄8" 150CL/CR/P Mal. Iron– – 5534GL/GR Nickel-Silver 1315CL/CR Nickel-Silver 51⁄2" 125CL/CR Mal. Iron

* All steel fittings are produced in Malleable Iron in an “As Cast” Finish.


HANDRAIL FITTINGSJuliusBlum&Co.Inc.



BRONZE STAINLESS MALLEABLE IRON

Be aware that due to the differences in tolerances between extruded handrail and cast fittings, butt joints usually require special attention to assure a proper match.

End Piece and Corner AvailabilityBend Non-Ferrous

Handrail Moulding Square End Piece (N) Corner Bend (C) Radius(r) Corner Bend * Iron Corner Bend *4529 Bronze 4529N Bronze 4529C Bronze 3" – –4530 Bronze 4530N Bronze 4530C Bronze 21⁄2" 450CC Bronze 150CC Malleable Iron4531 Bronze 4531N Bronze 4531C Bronze 21⁄2" 400CC Bronze 100CC Malleable Iron4532 Bronze 4530N Bronze 4530C Bronze 21⁄2" 450CC Bronze 150CC Malleable Iron4534 Bronze 4534N Bronze 4534C Bronze 21⁄2" 425CC Bronze 125CC Malleable Iron4535 Bronze 4535N Bronze 4535C Bronze 21⁄2" 450CC Bronze 150CC Malleable Iron4536 Bronze 4534N Bronze 4534C Bronze 21⁄2" 425CC Bronze 125CC Malleable Iron4537 Bronze 4531N Bronze 4531C Bronze 21⁄2" 400CC Bronze 100CC Malleable Iron4538 Bronze 4538N Bronze – – – –4539 Bronze 4539N Bronze 4539C Bronze 21⁄2" 425CC Bronze 125CC Malleable Iron4572 Bronze 4572N Bronze 4572C Bronze 21⁄2" – –4573 Bronze 4573N Bronze 4573C Bronze 3" – –4574 Bronze 4574N Bronze 4574C Bronze 3" – –4575 Bronze 4575N Bronze 4575C Bronze 21⁄2" 450CC Bronze 150CC Malleable Iron6488 Bronze 6488N** Bronze – – – –6489 Bronze 6489N** Bronze 6489C Bronze 5” – –6402 Aluminum 6902N Aluminum 6902C Aluminum 21⁄2" – –6405 Aluminum 6985N Aluminum 6985C Aluminum 21⁄2" – –6407 Aluminum 6907N Aluminum 6907C Aluminum 3" – –6434 Aluminum 6434N Aluminum – – – –6435 Aluminum 6435N Aluminum 6435C Aluminum 3" – –6436 Aluminum 6436N Aluminum – – – –6437 Aluminum 6437N Aluminum – – – –6530 Aluminum 6530N Aluminum 6530C Aluminum 4" – –6531 Aluminum 6531N Aluminum 6531C Aluminum 4" – –6532 Aluminum 6532N Aluminum 6532C Aluminum 4" – –6901 Aluminum 6901N Aluminum 6901C Aluminum 21⁄2" 600CC Aluminum 100CC Malleable Iron6902 Aluminum 6902N Aluminum 6902C Aluminum 21⁄2" 600CC Aluminum 100CC Malleable Iron6905 Aluminum 6905N Aluminum 6905C Aluminum 3" – –6906 Aluminum 6906N Aluminum 6906C Aluminum 3" – –6907 Aluminum 6907N Aluminum 6907C Aluminum 3" – –6929 Aluminum 6930N Aluminum 6930C Aluminum 21⁄2" 650CC Aluminum 150CC Malleable Iron6930 Aluminum 6930N Aluminum 6930C Aluminum 21⁄2" 650CC Aluminum 150CC Malleable Iron6931 Aluminum 6931N Aluminum 6931C Aluminum 21⁄2" 600CC Aluminum 100CC Malleable Iron6932 Aluminum 6932N Aluminum 6932C Aluminum 3" – –6933 Aluminum 6933N Aluminum 6933C Aluminum 21⁄2" 615CC Aluminum 125CC Malleable Iron6934 Aluminum 6934N Aluminum 6934C Aluminum 21⁄2" 615CC Aluminum 125CC Malleable Iron6935 Aluminum 6935N Aluminum 6935C Aluminum 21⁄2" 650CC Aluminum 150CC Malleable Iron6984 Aluminum 6984N Aluminum 6984C Aluminum 3" – –6985 Aluminum 6985N Aluminum 6985C Aluminum 21⁄2" 650CC Aluminum 150CC Malleable Iron6987 Aluminum 6987N Aluminum 6987C Aluminum 3" – –5235 Nickel-Silver 5235N Nickel-Silver 5235C Nickel-Silver 21⁄2" 1350CC Nickel-Silver 150CC Malleable Iron5274 Nickel-Silver 5274N Nickel-Silver 5274C Nickel-Silver 3" – –5288 Nickel-Silver 5288N** Nickel-Silver – – – –5289 Nickel-Silver 5289N** Nickel-Silver – – – –5530 Nickel-Silver 5530N Nickel-Silver 5530C Nickel-Silver 21⁄2" 1350CC Nickel-Silver 150CC Malleable Iron5534 Nickel-Silver 5534N Nickel-Silver 5534C Nickel-Silver 21⁄2" 1315CC Nickel-Silver 125CC Malleable Iron5538 Nickel-Silver 5538N Nickel-Silver – – – –5572 Nickel-Silver 5572N Nickel-Silver 5572C Nickel-Silver 21⁄2" – –4428 Steel 4428N* Malleable Iron 4428C* Malleable Iron 21⁄2" – 125CC Malleable Iron4429 Steel 4429N* Malleable Iron 4429C* Malleable Iron 21⁄2" – 100CC Malleable Iron4441 Steel 4441N* Malleable Iron 4441C* Malleable Iron 21⁄2" – 150CC Malleable Iron4488 Stainless Steel 4488N Stainless Steel – – – –6511 Stainless Steel 6511N Stainless Steel – – – –6512 Stainless Steel 6512N Stainless Steel – – – –

* “As Cast” Finish, no lacquer ** Flat End Cap matches profile


w600CC Aluminum 1"615CC Aluminum 11⁄4"650CC Aluminum 11⁄2"400CC Bronze 1"425CC Bronze 11⁄4"450CC Bronze 11⁄2"

1315CC Nickel-Silver 11⁄4"1350CC Nickel-Silver 11⁄2"100CC Malleable Iron 1"125CC Malleable Iron 11⁄4"150CC Malleable Iron 11⁄2"

C Corner BendTrim one leg for use as a wall return.Combine two corner bends together for 180° turns.

F Forged Lamb’s Tongue

21⁄1 2⁄2⁄ "

rr

r

21⁄1 2⁄2⁄

"

U End Urn Base

4531U Bronze4429U Malleable Iron

UC Center Urn Base

4429UC Malleable Iron

UL Corner Urn Base

4429UL Malleable Iron

CC Channel Corner Bend “As Cast” FinishFits the underside of moulding corner bend.

11⁄2"

2 1⁄2"

21⁄2"

11⁄2"

21⁄2"

a

HANDRAIL FITTINGSSatin Finish, except as noted Bronze and Nickel-Silver fittings are lacquered.

N Square End Piece

B Bevel Lamb’s Tongue

S Straight Lamb’s Tongue

a4429F Steel 18"4429F-3 Steel 36"4429F-4 Steel 48"4429F-5 Steel 60"4429F-6 Steel 72"

URN BASESUrn bases may be welded or bolted inplace with the finial stud.

1⁄2"

1⁄8"

w

HANDRAIL FITTINGS




V Volute


POST AND SPINDLE FITTINGSJuliusBlum&Co.Inc.


BRONZE STEEL

NICKEL-SILVER

TRADITIONAL POST LOWER COVER

Spindle Cups are machined from solid stock. Bronze and Nickel-Silver Cups are furnished in a satin finish and lacquered. Steel Cups are furnished in a black oxide machined finish suitable for painting. SpindleCups are not intended or designed to be a structural member.

1"

2"

11⁄2"

Ctsk. for 1⁄4"FH Screw

1⁄4" hex socket head set screw

5 5/8"

41⁄2"

33⁄8"

31/2 "

25/8"

41/2"

6"

1"

4"

5/16"

13/16"

7/16" hole

13/16"

3/4"

21/2"

1/4" 1/2"

888 Bronze198 Nickel-Silver

1988 Steel

887 Bronze

Brass Finished Head 3⁄8" x 2"Nickel-Silver Finished Head 3⁄8" x 2"

TRADITIONAL POST FASCIA FLANGE

13⁄16"

7 ⁄8"

2"

11⁄2"

Ctsk. for 1⁄4"FH Screw

1⁄4" hex socket head set screw

11 ⁄8"

PLAIN SPINDLE CUPRounded Hole

RINGED SPINDLE CUPRounded Hole

13⁄16"

11 ⁄8"

Hole884 Bronze 1⁄2"184 Nickel-Silver 1⁄2"

1984 Steel 1⁄2"

Hole883 Bronze 1⁄2"183 Nickel-Silver 1⁄2"

1983 Steel 1⁄2"

DECORATIVE HEX HEAD LAG SCREWFor mounting fascia flange


STARTING POSTS40"

11⁄4" 11⁄4" 11⁄2"11⁄2"11⁄2"11⁄2"1 1⁄2"

1"

1 1⁄2"

1"

1 1⁄2"

1"

11⁄2"

11⁄4"

1" 1" 11⁄4"1 1⁄2"

1"

332L 343L 347L 143L* 142L* 345L 326L 209 131 132 331L 731L 340 341 134Forged Steel Forged Steel Forged Steel Forged Bronze Bronze Forged Steel Forged Steel Bronze Bronze Nickel-Silver Forged Steel Aluminum Steel with Steel with Bronze

Bronze Nickel-SilverCenter Center* Satin Finished and lacquered

STARTING POSTS




11⁄4" 11⁄4"

1 1⁄2"

1"

Starting Posts from Julius Blum & Co., Inc. have been engineered and tested to conform to the ASTM 985 concentrated test load requirement.Copies of the Test Reports are available.

Capitol Dome, Oklahoma City, OKArchitect: Frankfurt-Short-BruzaFabricator: York Metal Fabricators, Oklahoma City, OK

STARTING POSTS36"

11⁄2"

7⁄8"

332 343 331 333Forged Steel Forged Steel Forged Steel Malleable Iron

Scale: 1" = 1'-0"

11⁄2"

FlutedRound

11⁄4"


Spindles are produced from solid stock and have a surface suitable for polishing or painting. Forged spindles with bronze and nickel-silver centers are permanently assembled and are equal in strength to solid spindles. Bronze and nickel-silver centers are polished and protected forshipment and installation. Aluminum spindles are machined from solid 6063 aluminum rod and have a surface suitable for painting or anodizing.Important: Spindles are not structural members nor intended to be starting posts.

SPINDLESJuliusBlum&Co.Inc.


Scale: 1" = 1'-0"

STARTING POSTS (36”)SPINDLES 36"

123 124 337 338 339 336 358 335 154 334Forged Forged Forged Forged Forged Forged Forged Malleable Malleable MalleableSteel Steel Steel Steel Steel Steel w/ Steel w/ Iron Iron Iron

w/ Bronze w/ Bronze w/ Bronze w/ Bronze w/ Bronze Nickel-Silver Nickel-Silver

718 137 138 139 29 30 329 330 129 130 323 324 325 327 328Aluminum Bronze Bronze Bronze Nickel- Nickel- Steel Steel Bronze Bronze Forged Forged Forged Forged Forged

Silver Silver Steel Steel Steel Steel Steel

1⁄2" 1⁄2" 1⁄2" 1⁄2" 1⁄2" 1⁄2" 1⁄2"

5⁄8"

1⁄2"

3⁄4" 3⁄4"

1⁄2" 3⁄8"

5⁄8" 5⁄8"

3⁄8" 1⁄2"

3⁄4"

1⁄2"

3⁄4"1⁄2" 1⁄2" 5⁄8"1⁄2" 1⁄2" 1⁄2" 1⁄2"1⁄2"

11⁄4"

1.10" FlutedRound

11⁄4"

1" 1"

Spindle(Upper half)

Spindle(lower half)

Bronze orNickel-Silvercenter

Spindle(Upper half)

Spindle(lower half)

Bronze orNickel-Silver centerwrapped for shipping

Forged steel spindles with decorative centersare forged in two halves with one end turneddown to 1⁄2" diameter solid rod. This rod isforce-fit into a recess drilled in the other half ofthe spindle forming a permanent assemblywith a full 1⁄2" of solid steel at the center,thereby overcoming the weakness of anassembly using a threaded stud.

Bronze and Nickel-Silver Center Detail




45

SPINDLES



BRONZE MALLEABLEIRON/STEEL

Scale: 1" = 1'-0"

SPINDLES42"

129L 130L 29L 30L 739L 730L 329L 330L 123L 124L 23L 24L 723L 724L Bronze Bronze Nickel- Nickel- Aluminum Aluminum Steel Steel Forged Forged Forged Forged Aluminum Aluminum Silver Silver Steel Steel Steel w/ Steel w/ w/ Bronze w/ Bronze Nickel-Silver Nickel-Silver

323L 324L 325L 327L 328L 334L 336L 337L 338L 339L 325DL 325DL 325DL Forged Forged Forged Forged Forged Malleable Forged Steel Forged Steel Forged Steel Forged Steel Forged Steel Forged Steel Forged Steel Steel Steel Steel Steel Steel Iron w/ Nickel-Silver w/ Bronze Bronze w/ Bronze

½"

¾"

¾"

¾"

Ž"

¾" ¾"¾" Ž" ½"½" ½" ½" ½" ½"

½" ½" ½" ½" ½" þ" þ"

9½" 9½" 9½" 9½"

½" ½" ½" ½" ½" ½" ½" ½" ½" ½"Ž" 1" Ž"

46

Width at widestSpindle point 1973* Aluminum 5¼" 1531 Aluminum 4¾" 531 Mal. Iron 4¾" 531D Mal. Iron 4¾" 533 Mal. Iron 5" 533D Mal. Iron 5" 973* Mal. Iron 5¼" 529 Mal. Iron 5Ž" 530 Mal. Iron 5Ž" 530D Mal. Iron 5ž" 153 Mal. Iron 6" 159 Mal. Iron 6" 534 Mal. Iron 6" 532 Mal. Iron 6ł" 532D Mal. Iron 6ł" 528 Mal. Iron 7" 158 Mal. Iron 7"

* See page 47

SPINDLES40"

ORNAMENTALSPINDLES36"

Ornamental Spindles

½"½" ½" ½"Ž"Ž" Ž" Ž" Ž" Ž" Ž" Ž" ½" ½"

528 158 529 159 534 153 530 530D 531 531D 532 532D 533 533D Malleable Malleable Malleable Malleable Malleable Malleable Malleable Malleable Malleable Malleable Malleable Malleable Malleable Malleable Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron Iron

1531 Aluminum

740 234 235 236 239 Aluminum Bronze Bronze Nickel- Silver Bronze

SPINDLES



BRONZE MALLEABLEIRON

Scale: 1" = 1'-0"

1" 1"

FlutedRound

11⁄4"

FlutedRound

11⁄4"

FlutedRound

1"

ž" ¾"ž"

572R 4Ž"

4Ž"

4"

598R

4"

2ž"2ž"

3¾" 3¾"

526R

4¼"4¼"

4"

4"

572R 4Ž"

4Ž"

4"

598R

4"

2ž"2ž"

3¾" 3¾"

526R

4¼"4¼"

4"

4"

572R 4Ž"

4Ž"

4"

598R

4"

2ž"2ž"

3¾" 3¾"

526R

4¼"4¼"

4"

4"

SPINDLESTOPS

526-R Malleable Iron



ORNAMENTAL VALANCES


ALUMINUM

MALLEABLE IRON

552 Mal.Iron 4.3 lbs. 10"ht 19"wd

Aluminum / Malleable IronThese castings are useful in various combinations to create ornamental railings with minimal openings. When used with 1⁄2" square bars,the maximum opening will be 33⁄4", thereby conforming to the 4"sphere requirement.17"

1"

1⁄2"

45 ⁄8"

3"

17"

1"

1⁄2"

5"

17"1⁄2"

1⁄2" 1⁄2"

Repeat or alternate 522 and 523 for continuous runs in columns or friezes.

1973 Aluminum973 Malleable Iron

522 Mal. Iron 8.4 lbs. 67⁄16"ht 203⁄8"wd 523 Mal. Iron 6.9 lbs. 67⁄16" ht 201⁄4" wd

514 3.4 lbs. 61⁄2"ht 14"wd

550 Malleable Iron 6.7 lbs. 71⁄8" ht 34" wd

572 Malleable Iron 5.7 lbs. 67⁄8" ht 221⁄2" wd

584 Malleable Iron 9.9 lbs. 61⁄2" ht 29" wd

Scale: 11⁄2" = 1'-0"

Siena

Corinthian

Bordeaux Primavera

Dresden

ORNAMENTAL VALANCES

ORNAMENTAL VALANCE BARS 36"Conforms to 4" sphere requirement.

lbs. ht wd1970 Aluminum 1.2 45⁄8" 17"970 Malleable Iron 3.4 45⁄8" 17"

lbs. ht wd1971 Aluminum .8 3" 17"971 Malleable Iron 2.2 3" 17"

lbs. ht wd1972 Aluminum 1.1 5" 17"972 Malleable Iron 3.3 5" 17"


48

Bases, Collars and Flanges are furnished with clear holes for bar sizes shown. Non-ferrous items are satin finished, except as noted. Alumi-num items are cast from Almag 35. Bronze items are cast from C86500 bronze and match the color of extruded architectural bronze. Polished bronze and Nickel-Silver items are given a protective lacquer coating.

Round Hole Hole Width Height 80 Turned Brass–unpolished ½" 1¼" ¾"480 Nickel-Silver ½" 1¼" ¾" 75 Turned Steel þ" 1¼" ¾" 77 Turned Steel ½" 1¼" ¾"

Round HoleAluminum Bronze Nickel-Silver Cast Iron Hole Width Height 255 355 þ" 1¼" 1Ł" 256 456 356 ½" 1¼" 1Ł"717 257 357 Ž" 1þ" 1Þ760 250 455 ¾" 2½" 1Ž"719 249 449 349 1" 2½" 1Ž" 251 1¼" 2½" 1Ž"

Square Hole Aluminum Bronze Nickel-Silver Hole Width Height752 252 452 ½" 1¼" 1Ł"753 253 Ž" 1¼" 1Ł"754 254 454 ¾" 1þ" 1Ł"767 267 467 1" 1Š" 1Ð"768 268 448 1¼" 2¾" 1½"769 269 479 1½" 3" 1½" 244 2" 3¾" 2ł"

BALUSTERS,COLLARS,BASESANDFLANGES

JULIUS BLUM & CO., INC. 8005266293 www.juliusblum.com FAX 201 438 6003

ALUMINUM NIckeL-sILver

BrONZe cAsTIrON/sTeeL

BAses BAses

Square Hole Hole Width Height352 Cast Iron ½" 1¼" 1Ð"353 Cast Iron Ž" 1¼" 1Ð"354 Cast Iron ¾" 1þ" 1Ð"367 Cast Iron 1" 1¾" 1Þ"368 Cast Iron 1¼" 2¾" 1Ž"369 Cast Iron 1½" 3" 1¾"

Round Hole Hole Height264 Bronze 1" 2 Ž"434 Nickel-Silver 1" 2 Ž"

Matches center of 234and 340post

1" 1"

1" 1"

¾"

¾" ¾"

¾"

Square Hole Hole a b Width362 Cast Iron ½" 2" 1" 1¼"363 Cast Iron Ž" 2¼" 1" 1¼"262 Bronze ½" 2" 1" 1¼"263 Bronze Ž" 2¼" 1" 1¼"

b

a

2¼"

¾"

2¼"

¾"

Round Hole Hole a b Width359 Cast Iron þ" 1ž" 1" 1¼"360 Cast Iron ½" 1ž" 1" 1¼"361 Cast Iron Ž" 2 ð" 1Þ" 1þ"260 Bronze ½" 1ž" 1" 1¼"261 Bronze Ž" 2 ð" 1Þ" 1þ"

b

a

b

a

Round Hole Hole347 Turned Steel 1½"

Square HoleCast Iron Mal. Iron Aluminum Hole Base Height201 301 1201 1" 3" 13⁄8"202 1202 11⁄4" 31⁄4" 11⁄2"203 1203 11⁄2" 31⁄2" 13⁄4"204 1204 2" 4" 13⁄4"205 1205 21⁄2" 41⁄2" 17⁄8"206 1206 3" 51⁄4" 23⁄8"

BALUSTERS, COLLARS, BASES AND FLANGES



BRONZE CAST IRON / MALLEABLE IRON / STEEL

TUBE SOCKETS

FLANGES

COLLARS

ORNAMENTAL COLLARSThese collars are cored to slide over 1⁄2" or 5⁄8" square bar. Collars are easily applied and can be fastened by screws or bytack welding. See page 54 for additional baluster ornaments.

Round Hole, TurnedSteel Bronze Nickel-Silver Hole OD Height73 3⁄8" 3⁄4" 13⁄32"74 274 474 5⁄8" 1" 1⁄2"

Round Hole, TurnedSteel Bronze Nickel-Silver Hole OD Height72 272 472 1⁄2" 1" 9⁄16"

273 473 1" 11⁄4" 3⁄4"

Square HoleHole Width Height

365 Cast Iron 1⁄2" 11⁄2" 2"366 Cast Iron 5⁄8" 111⁄16" 17⁄8"348 Cast Iron 3⁄4" 115⁄16" 2"

Square HoleHole Width Height

765 Aluminum 1⁄2" 13⁄8" 13⁄4"766 Aluminum 5⁄8" 13⁄8" 13⁄4"265 Bronze 1⁄2" 13⁄8" 13⁄4"266 Bronze 5⁄8" 13⁄8" 13⁄4"

Round HoleHole Width Height

281 Bronze 1⁄2" 11⁄4" 13⁄4"282 Bronze 5⁄8" 11⁄4" 13⁄4"

Hole Width Height Weight544 Malleable Iron 1⁄2" 3" 41⁄4" .685546 Malleable Iron 1⁄2" 3" 71⁄4" .767543 Malleable Iron 1⁄2" 43⁄8" 41⁄4" .870545 Malleable Iron 5⁄8" 3" 41⁄4" .686547 Malleable Iron 5⁄8" 3" 71⁄4" .865535 Malleable Iron 5⁄8" 41⁄2" 47⁄8" 1.160

Square Hole Round HoleMalleable MalleableIron Hole Base Height Iron Aluminum Bronze Hole Base Height390 1⁄2" 15⁄16" 1" 395 3⁄8" 15⁄16" 1"391 5⁄8" 15⁄16" 1" 396 776 276 1⁄2" 15⁄16" 1"393 1" 113⁄16" 13⁄16" 397 797 297 5⁄8" 17⁄16" 11⁄8"

544545

543535

546547

Square HoleHole Base Height

342 Malleable Iron 7⁄16" 11⁄8" 11⁄8"344* Malleable Iron 1⁄2" 11⁄8" 11⁄8"350 Malleable Iron 1⁄2" 11⁄8" 13⁄16"351 Malleable Iron 5⁄8" 13⁄16" 13⁄16"398 Malleable Iron 3⁄4" 17⁄16" 7⁄8"400 Malleable Iron 7⁄8" 15⁄8" 1"399 Malleable Iron 1" 13⁄4" 11⁄8"

* 344 is similar to 350 but is high enough to permit adjustment of baluster height for uneven steps


Tube Size Ball Diam. Height5320 Cast Iron 2"× 2" 113⁄16" 33⁄4"5325 Cast Iron 21⁄2"× 21⁄2" 21⁄8" 33⁄4"5330 Cast Iron 3"× 3" 23⁄16" 33⁄4"5335 Cast Iron 31⁄2"× 31⁄2" 21⁄2" 33⁄4"5340 Cast Iron 4"× 4" 23⁄4" 33⁄4"

POST CAPSJuliusBlum&Co.Inc.


ALUMINUM STAINLESS

BRONZE CAST IRON / STEEL

BALL CAP

DRIVE-ON CAP

CAP TYPE C

CAP TYPE AType A bronze and aluminum caps are satin finished. Cast aluminumcaps are Almag 35. Bronze caps are cast from C86500 bronze—to match closely the color of extruded architectural bronze—and are lacquered.

CAP TYPE DType D Post Caps are extruded and machined from aluminum alloy6063 and are suitable for anodizing. Lugs fit inside 1⁄8" wall tubing withsharp corners and are easily ground down to fit 3⁄16" or 1⁄4" wall tubing.

DRIVE-ON CAP , TYPE WFor drive fit. Caps do not require fastening. 18 ga.

5411 Cast Iron Drive fit for 1"×1"× .073" structural tubing

Tube Size5615 Cast Iron 11⁄2"× 11⁄2"5620 Cast Iron 2"× 2"5625 Cast Iron 21⁄2"× 21⁄2"5632 Cast Iron 3"× 2"5630 Cast Iron 3"× 3"5635 Cast Iron 31⁄2"× 31⁄2"5640 Cast Iron 4"× 4"5642 Cast Iron 4"× 2"

56425 Cast Iron 4"× 21⁄2"5643 Cast Iron 4"× 3"5652 Cast Iron 5"× 2"

56525 Cast Iron 5"× 21⁄2"5653 Cast Iron 5"× 3"5650 Cast Iron 5"× 5"5663 Cast Iron 6"× 3"5664 Cast Iron 6"× 4"5660 Cast Iron 6"× 6"5683 Cast Iron 8"× 3"5684 Cast Iron 8"× 4"

Satin FinishTube Size

5720 Cast Bronze 2"× 2"5730 Cast Bronze 3"× 3"5740 Cast Bronze 4"× 4"5763 Cast Bronze 6"× 3"5784 Cast Bronze 8"× 4"

Tube Size*5415 Cast Iron 11⁄2"× 11⁄2"5420 Cast Iron 2"× 2"5440 Cast Iron 4"× 4"

* 11 ga. maximum thickness

Tube Size5920 Pressed Steel 2"× 2"5925 Pressed Steel 21⁄2"× 21⁄2"5930 Pressed Steel 3"× 3"5935 Pressed Steel 31⁄2"× 31⁄2"5943 Pressed Steel 4"× 3"5940 Pressed Steel 4"× 4"5963 Pressed Steel 6"× 3"5933 Pressed Stainless Steel 3"× 3"5944 Pressed Stainless Steel 4"× 4"

Satin FinishTube Size

5820 Cast Alum. 2"× 2"5830 Cast Alum. 3"× 3"5840 Cast Alum. 4"× 4"5863 Cast Alum. 6"× 3"5864 Cast Alum. 6"× 4"5883 Cast Alum. 8"× 3"5884 Cast Alum. 8"× 4"

Tube Size5120 Extruded Aluminum 2"× 2"5130 Extruded Aluminum 3"× 3"5132 Extruded Aluminum 3"× 2"5140 Extruded Aluminum 4"× 4"5142 Extruded Aluminum 4"× 2"5143 Extruded Aluminum 4"× 3"5152 Extruded Aluminum 5"× 2"5153 Extruded Aluminum 5"× 3"5162 Extruded Aluminum 6"× 2"5163 Extruded Aluminum 6"× 3"5164 Extruded Aluminum 6"× 4"5183 Extruded Aluminum 8"× 3"5184 Extruded Aluminum 8"× 4"

Rounded inside corners

Rounded inside corners


13⁄3 32⁄32⁄ " hole

E Terminal T Center Piece L Corner Piece

FINIAL BASES / URN AND BALL FINIALS



BRONZE MALLEABLE IRON

b

ac

b

a

b

a

11⁄8"

4"

7⁄8"

3"

Round Base3064 Bronze

Round Base3073 Bronze3277† Aluminum

† Unpolished

Square Base a b c3545 Mal. Iron 2" 13⁄4" 31⁄2"3544 Mal. Iron 13⁄4" 11⁄2" 31⁄8"3543* Mal. Iron 11⁄2" 11⁄4" 23⁄4"3542* Mal. Iron 11⁄4" 11⁄8" 23⁄8"3541 Mal. Iron 1" 7⁄8" 13⁄4"3145 Bronze 2" 13⁄4" 31⁄2"3144 Bronze 13⁄4" 11⁄2" 31⁄8"3143 Bronze 11⁄2" 11⁄4" 23⁄4"3142 Bronze 11⁄4" 11⁄8" 23⁄8"Round Base3045 Bronze 2" 13⁄4" 31⁄2"3044 Bronze 13⁄4" 11⁄2" 31⁄8"3043 Bronze 11⁄2" 11⁄4" 23⁄4"3042 Bronze 11⁄4" 11⁄8" 23⁄8"3041 Bronze 1" 7⁄8" 13⁄4"3243 Aluminum 11⁄2" 11⁄4" 23⁄4"

* Available with or without a 3⁄8" tapped hole.

Square Base a b3526 Malleable Iron 6" 13⁄4"3525 Malleable Iron 5" 11⁄2"3524 Malleable Iron 4" 11⁄4"3523 Malleable Iron 3" 1"3126 Bronze 6" 13⁄4"3125 Bronze 5" 11⁄2"3124 Bronze 4" 11⁄4"3123 Bronze 3" 1"3323 Aluminum 3" 1"Round Base3025 Bronze 5" 11⁄2"3024 Bronze 4" 11⁄4"3023 Bronze 3" 1"4024 Nickel-Silver 4" 11⁄4"

Square Base a b3134 Bronze 4" 11⁄2"3133 Bronze 3" 1"Round Base3034 Bronze 4" 11⁄2"3033 Bronze 3" 1"

URN AND BALL FINIALSBronze, Nickel-Silver and Aluminum urns and finials are polished.Bronze and Nickel-Silver items are clear lacquered. All urns and finialsare supplied with a 3⁄8" tapped hole in the base, except as noted.

U End Urn Base UC Center Urn Base UL Corner Urn Base

TERMINALS, CENTER PIECES AND CORNER PIECES

Be aware that due to the difference in tolerances betweenextruded handrail and cast fittings, butt joints usually requirespecial attention to assure a proper match.

FINIAL BASESBronze and aluminum bases are satin finished. Bronze bases arealso lacquered.

URN BASES

6929 6930E 6930L 6930T –6930 6930E 6930L 6930T –6931 6931E 6931L 6931T –6934 6934E 6934L 6934T –6935 6935E – 6935T –4530 4530E 4530L 4530T –4531 4531E 4531L – 4531U4532 4530E 4530L 4530T –4534 4534E 4534L 4534T –4535 – – 4535T –4536 4534E 4534L 4534T –4537 4531E 4531L – 4531U4428 4428E 4428L – –4429 4429E 4429L 4429T 4429U4441 4441E – – –

HandrailMoulding

TerminalEnd Piece (E)

Corner Piece (L)

Center Piece (T)

End UrnBase (U)

Fittings Availability

Urn bases may be welded or bolted in place with the finial stud.


JuliusBlum&Co.Inc.


TREILLAGE AND ORNAMENTAL RAILING PANELS

Many of the Julius Blum Treillage patterns are available in both Alu-minum and Malleable Iron. Aluminum castings are recommendedwhere it is important to keep weight at a minimum, as in gates orremovable screens. Otherwise, malleable iron castings are preferredfor their strength and resistance to breakage. All castings are doublefaced and cleanly finished.

Malleable Iron is similar in weight, feel and appearance to grayiron—commonly known as cast iron. Gray iron is suitable for small,simple pieces such as post caps, or heavy, solid pieces such as man-hole covers. It is not suitable for delicate ornamental cast patterns suchas scrolls and flowers. Gray iron is brittle and shatters easily whendropped or hit and it is subject to cracking when exposed to unevenheat during welding. Malleable Iron will not break or shatter in thecourse of ordinary handling or shipping and withstands considerableabuse. To some degree, malleable iron castings can be bent cold andthey are easily welded. The special properties of malleable iron are pro-duced by heat treating specially alloyed castings in large furnacesunder precisely controlled temperature conditions for 8 to 10 days.

Malleable Iron Castings are not priced to compete with gray ironcastings. Despite the unsuitability of gray iron for intricate ornamentalcastings, many ornamental patterns are offered in this cheaper material. Since the manufacture of gray iron castings requires feweroperations than heat-treated malleable iron, and since they are not fin-ished with the care of Julius Blum ornamental castings, they can besold for less. However, breakage during shipping, fabrication, installa-tion and everyday use often eradicates savings due to the initial lowercost. In the long run, its permanence and the quality of the final prod-uct make malleable iron more desirable. When panels are assembledinto screens spanning more than three panels’ width or height, it isimportant to provide adequate intermediate supports.

Aluminum items are cast from Almag 35. Anodizing of aluminumpanels is not recommended as the material will not anodize consistentlyand does not match the color of anodized extruded aluminum.

All items are carried in stock in substantial quantities and are normally available for prompt shipment.

ORNAMENTALRAILING PANELSJulius Blum & Co.,Inc.’s malleable ironrailing panels arealso used to providearchitectural detailson both stairs andstraight runs. Someof the panels have been slightly redesignedto meet current code requirements.

TREILLAGEAll Julius Blum &Co., Inc. treillagepanels are doublefaced and superblydetailed. Becausethey are malleableiron, they may bewelded and bentcold and will not break or shatter in thecourse of normal handling.

ORNAMENTAL COLLARSDesigned to fit over1⁄2" or 5⁄8" squarebars, ornamentalcollars are a costeffective way of pro-viding details to astair, fence or gate.A wide variety of design options are possibleusing a combination of ornamental collars.

TREILLAGE, PANELS AND ROSETTES

Fabricator: Artistic Railing, Garfield, NJ

Photographer: John R

ae


All castings are double faced. Scale: 13⁄8"=1'-0"

ORNAMENTAL RAILING PANELS


MALLEABLE IRON

537* Malleable Iron 5.5 lbs.Cross Section: Scroll – 1⁄2"× 5⁄16"Ends – 1⁄2" × 1⁄2"



CHATEAURailing Panels

24"

105⁄8"

24"

105⁄8"

37"

285 ⁄8

"

33⁄8"

31⁄2"

7"

34"

261 ⁄2

"

81⁄2"

540 Malleable Iron 9 lbs.Cross Section: 5⁄8"× 1⁄2"

541* Malleable Iron 10 lbs.Cross Section: 5⁄8"× 1⁄2"

34"

291 ⁄2

"

91⁄4"

* When framed, the open spaces will conform to 4" sphere requirement.

Panels 540 and 541 are often combinedboth horizontally and vertically.


8"71 ⁄1

6"63 ⁄1

6"8"

101 ⁄8

"

597

597

598

597

5961⁄2" sq. bar


JuliusBlum&Co.Inc.


MALLEABLE IRON

ORNAMENTAL COLLARS

EMPIREFor 1⁄2" square barDiamond-shaped cross section gives these panels a distinctive style.

CAMBRIDGE Ornamental PanelsThe four elements of the Cambridge designcan be combined in many different ways toform panels, columns or friezes. The castingsare cored to slide over a 1⁄2" square bar.

FLORENTINE Railing Panels For 1⁄2" square bar, except as noted

ORNAMENTAL COLLARSThese collars are cored to slide over 1⁄2" except as noted. Collars areeasily applied and can be fastened by screws or by tack welding.

Florentine collarsare open on oneside for easy instal-lation over squarebar by tack welding.

Tack weld

Square balusters

TYPICAL SECTION THROUGH COLLARS

Empire and Florentine collars are open on the reverse to fit oversquare bar. Cambridge and Ornamental Collars are cored toslide over square bar.

597 2.6 lbs.Ht: 95⁄16" Wd: 8"

599 4.1 lbs.Ht: 117⁄8" Wd: 8"

963 1.76 lbs.Ht: 11" Wd: 8"

964 2.03 lbs.Ht: 11" Wd: 8"

965 2.72 lbs.Ht: 11" Wd: 8"

596 3.6 lbs.Ht: 101⁄8" Wd: 8"

598 2.8 lbs.Ht: 63⁄16" Wd: 8"

559 3.0 lbs.Ht: 15" Wd: 7"

560 3.6 lbs.Ht: 16" Wd: 81⁄2"

561 1.9 lbs.Ht: 12" Wd: 81⁄2"

562* 3.8 lbs.Ht: 15" Wd: 7"

563* 3.9 lbs.Ht: 16" Wd: 81⁄2"

564* 2.6 lbs.Ht: 12" Wd: 81⁄2"

* For 5⁄8" square bar

565 3.3 lbs.Ht: 15" Wd: 81⁄2"

566 2.9 lbs.Ht: 16" Wd: 7"

567 3.3 lbs.Ht: 16" Wd: 81⁄2"

546 .767 lbs.Ht: 73⁄4" Wd: 3"

543 .870 lbs.Ht: 43⁄4" Wd: 41⁄2"

544 .685 lbs.Ht: 43⁄4" Wd: 3"

547* .865 lbs.Ht: 73⁄4" Wd: 3"

535* 1.160 lbs.Ht: 47⁄8" Wd: 41⁄2"

545* .686 lbs.Ht: 43⁄4" Wd: 3"

* For 5⁄8" square bar

967 1.04 lbs.Ht: 51⁄2" Wd: 51⁄4"

968 1.14 lbs.Ht: 51⁄2" Wd: 51⁄4"

969 .82 lbs.Ht: 5" Wd: 5"




ALUMINUM

MALLEABLE IRON


34"

8"Railing Panel

Modular Panel

71 ⁄4"

73⁄4"

123⁄8"

27"

ONDINE

27"

9"

CANTERBURY

Edge Mullion20' lengths

13⁄4"

1"

1 ⁄4"1⁄4"

Mullion20' lengths

Filler Rod 6' lengths

27"

131⁄2"

GOSSAMER

Socket

27"

131⁄2"

ARABESQUE

1960 Aluminum 2.6 lbs.960 Mal. Iron 7.9 lbs.




81⁄2" 83⁄16"

6432

6433

64311963

Panels can be joined both vertically and horizontally to form screens and grilles.

1962 Aluminum 4.3 lbs.962 Malleable Iron12.6 lbs.

1963 Aluminum .80 lb.

Assembly Detail

6433 Aluminum .493 lb/ft


763 AluminumFor mullion 6433 23⁄4" diameter flange

TRECENTOTrecento panel 1963 dovetails with mullions 6433 or 6432. Panelscan be arranged in continuous runs or make right-angle turns, tees orcrosses. Panels can be stacked to form solid screens or separated bylengths of filler rod 6431 to achieve a more open effect. Filler rod 6431may also be used to close the recess in the exposed sides of the mul-lion. Panels may be locked into position by tack welding, caulking, setscrews or pins.



JuliusBlum&Co.Inc.


ALUMINUM

MALLEABLE IRON



AMSTERDAM

27"

131⁄2"

27"

63⁄4"

27"

131⁄2"

SENTRY DIAMOND

27"

131⁄2"

LATTICE

27"

63⁄4"

CASCADE

27"

131⁄1 2⁄2⁄ "

590 Malleable Iron 10.5 lbs. 1508 Aluminum 3.1 lbs. 1504 Aluminum 1.5 lbs.504 Malleable Iron 4.5 lbs.

1583 Aluminum 4.3 lbs.583 Malleable Iron 12.8 lbs.






MALLEABLE IRON


5⁄8"

SIENAMalleable Iron

SOMERSETMalleable Iron

REGENCEMalleable Iron

Repeat or alternate 522and 523 for continuousruns in columns or friezes.

522 8.4 lbs.Ht: 203⁄8" Wd: 67⁄16"Continuous design

527 3.7 lbs.Ht: 7" Wd: 133⁄8"Corner Bracket

526 2.6 lbs.Ht: 67⁄16" Wd: 67⁄16"Corner Rosette


524 4.3 lbs.Ht: 12" Wd: 67⁄16"Starting Panel

532 5.0 lbs.Ht: 36"Baluster Bar

520 10.5 lbs.Ht: 247⁄8" Wd: 67⁄16"Railing Panel

521 16.0 lbs.Ht: 247⁄8" Wd: 12"Railing Panel

525 4.2 lbs.Ht: 135⁄8" Wd: 67⁄16"End Panel

581 4.1 lbs.Ht: 9" Wd: 9"Corner Rosette

580 13.0 lbs.Ht: 28" Wd: 9"Railing Panel

582 6.5 lbs.Ht: 14" Wd: 19"Corner Bracket

577 8.2 lbs.Ht: 151⁄4" Wd: 18"Corner Bracket




JuliusBlum&Co.Inc.


MALLEABLE IRON



ROCOCOMalleable Iron

CORINTHIAN

568 8.7 lbs.Ht: 28" Wd: 81⁄2"Railing PanelUse together with 569

569 6.5 lbs.Ht: 21" Wd: 81⁄2"Continuous design

572 5.7 lbs.Ht: 221⁄2" Wd: 7"Continuous design


550 6.7 lbs.Ht: 34" Wd: 71⁄8"Continuous design




588 10.5 lbs.Ht: 161⁄2" Wd:193⁄4"Corner Bracket

586 14.9 lbs.Ht: 28" Wd: 83⁄4"Railing Panel

574 5.0 lbs.Ht: 101⁄4" Wd: 16"Corner Bracket

570 4.1 lbs.Ht: 121⁄2" Wd: 81⁄2"CollarCollar is open on oneside to fit over square1⁄2" bar.


Des

ign

repe

ats

at 2

2"

CORINTHIANMalleable Iron

DRESDENMalleable Iron




MALLEABLE IRON


515B 4.9 lbs.Ht: 21" Wd: 111⁄2"Corner Bracket



515 8.7 lbs.Ht: 231⁄2" Wd: 25"Corner BracketFurnished in two sections

511 11.2 lbs. Ht: 81⁄4" Lt: 31" Frieze


514 3.4 lbs. Ht: 61⁄2" Lt: 14"Valance



548 12.3 lbs. Ht: 273⁄4" Wd: 8"Railing Panel

CHARNWOODMalleable Iron

BORDEAUXMalleable Iron

Furnished in three sections


JuliusBlum&Co.Inc.


ORNAMENTAL PANELS AND CAST ROSETTES


CAST ROSETTESThickness: Approx. 1⁄4"Burnished, except as noted

MILANMalleable IronBeing of equal width, Milan panels may be stacked vertically.

PRIMAVERAMalleable IronOrnamental Panels

OD2454 Aluminum 23⁄4"2654 Bronze 23⁄4"1654 Nickel-Silver 23⁄4"2554* Cast Iron 23⁄4"

* As Cast

OD6603 Bronze 13⁄4"1603 Nickel-Silver 13⁄4"6203* Cast Iron 13⁄4"

* As Cast

OD6601 Bronze 17⁄8"1601 Nickel-Silver 17⁄8"6201* Cast Iron 17⁄8"

* As Cast

Oval2453 Aluminum 35⁄16" × 21⁄16"2653 Bronze 35⁄16" × 21⁄16"1653 Nickel-Silver 35⁄16" × 21⁄16"2553* Cast Iron 31⁄2" × 23⁄16"

* As Cast

591 3.9 lbs.Ht: 10" Wd: 10"

(Without legs: 8"× 8")

592 3.4 lbs.Ht: 10" Wd: 10"


593 3.2 lbs.Ht: 10" Wd: 10"


595 3.7 lbs.Ht: 10" Wd: 10"






516 3.7 lbs.Ht: 81⁄4" Wd:131⁄4"Corner Bracket

594 3.0 lbs.Ht: 10" Wd: 10"



BRONZE CAST IRON / MALLEABLE IRON


ORNAMENTS AND PICKETS


ALUMINUM

MALLEABLE IRON / PRESSED STEEL

All castings are double faced.

PRESSED STEEL MOULDINGS10' lengths, 100' minimum order

PRESSED STEEL LEAVES*

PICKETSShanks: 1" lengths

PRESSED STEEL ROSETTES*Malleable Iron

PRESSED STEEL CANDLE PANSAND HUSKS*

2855 Pressed Steel Wd: 31⁄4"



2859 Pressed Steel Wd: 2"


53⁄4"

1⁄2"

7"

1⁄2"

53⁄8"

1⁄2"

2016 Lt: 41⁄2"

2017 Lt: 41⁄2"

2003 Lt: 31⁄2"

2962 Wd: 4"

2982 Lt: 91⁄4"

Length 2012 6"2014 101⁄4"2015 11"

2524 Wd: 13⁄8"

3 Aluminum4 MaIleable Iron



OD 2611 23⁄8"2616 35⁄8"

OD 2515 11⁄2"2528 2"2538 3"

2932 Wd: 21⁄2"

2023 Lt: 5"

2640 OD: 33⁄4"

2719Ht: 51⁄2" Wd: 21⁄4"

2726Ht: 51⁄2" Wd: 21⁄4"

2717Ht: 31⁄4" Wd: 31⁄4"

* 100 piece packages


JuliusBlum&Co.Inc.


CARLSTADT® RAILING SYSTEMS

THE MOST VERSATILE SYSTEM FOR RAILINGS IN ALUMINUM, BRONZE, NICKEL-SILVER, STAINLESS STEEL AND ACRYLIC/WOOD

The Carlstadt® railing system features a full range of componentsavailable in aluminum, bronze, nickel-silver, and stainless steel tomeet virtually any installation requirement. Posts and handrails maybe combined with a variety of post, wall, and fascia brackets toachieve a wide range of design alternatives while meeting code andother regulatory requirements. The Carlstadt® system uses self-aligning Carlstadt® handrail brackets.

Aluminum railing components are made of alloy 6063, exceptfor cast flanges, corner bends, and floor flanges, which are cast fromAlmag 35. Aluminum extrusions are produced and handled with greatcare for use in architectural applications and are suitable for most of the hard coat anodic processes. Black anodizing may result in

inconsistent matches. Consult your anodizer before specifying.Bronze components are made of extruded architectural bronze

alloy C38500, except for cast cover flanges, corner bends, and termi-nals, which are cast from alloy C86500.

Nickel-Silver components are extruded of alloy C79800.Nickel-Silver is a copper alloy which has the color of stainless steelwith golden highlights.

Stainless Steel components are made of type 302/304 (18-8)stainless steel.

Acrylic/Wood rail is a prefinished composite material whichretains all the beauty of natural hardwood—oak, walnut and ash—andprovides it with a hard, lustrous acrylic surface. This is achieved

Business School, Jackson State University, Jackson, MS General Contractor: Harrell Construction, Jackson MS Architect: Eley Associates, Jackson, MS Fabricator: Action Fabricators, Marion, AR


CARLSTADT® RAILING SYSTEMS


through the Permagrain® Radiation Process which impregnates thewood with acrylic plastic and hardens it by irradiation. The resultingcomposite has twice the resistance to indentation and several timesthe resistance to abrasion as the same hardwood finished conven-tionally. Acrylic/Wood handrails are laminated from several strips soas to obtain greater strength and continuous uniform lengths. Postshave an aluminum spine for strength and ease of assembly. Exposedaluminum surfaces of the post and aluminum-spined handrail have aclear anodized finish (AA-M10-C22-A31). Fascia mounting bracketsprovide concealed post fastening.

Americans with Disabilities Act (ADA): The Americans withDisabilities Act adopted by Congress in 1992 required handrails to be

11⁄4" minimum and 11⁄2" maximum. However, the US Architecture andTransportation Barriers Compliance Accessibility Guidelines—July1998 has now clarified the intent of the dimensional requirements to be11⁄4" minimum to a nominal 2" maximum. It is important to note thatSection 4.26.2 Size and Spacing of Grab Bars and Handrails of theADAAG Manual states in part, “Standard IPS pipe designated by 11⁄4"to 11⁄2" is acceptable.”

ADAAG also allows handrails which provide an equivalent grippingsurface. ANSI117.1-98 defines this alternative: equivalent gripping sur-faces are permitted provided they have a perimeter dimension of 4"(100mm) minimum and 61⁄4" (160mm) maximum and provided theirlargest cross-section dimension is 21⁄4" (57mm) maximum.

CARLSTADT® RAILINGThe Carlstadt® railing system provides a flexible range of railingand post components in aluminum, bronze, nickel-silver, stainlesssteel and Acrylic/Wood to meet almost any installation or coderequirement. The Carlstadt® railing system uses Carlstadt® self-aligning handrail brackets.

CARLSTADT® ACRYLIC / WOODCarlstadt® Acrylic/Wood posts and handrails are manufacturedfrom a pre-finished composite material which retains the beauty ofwood and provides a durable and lustrous acrylic surface. Thismaterial resists fading, may be used indoors or out, and may beeasily refinished by sanding and buffing.


JuliusBlum&Co.Inc.


ALUMINUM

ACRYLIC / WOOD

CARLSTADT® ACRYLIC / WOOD

33⁄4"

17 ⁄8"

13⁄4"31 ⁄2

"

15⁄8"

51 ⁄2"

15⁄8"

51 ⁄2"

Acrylic/Wood rail is a prefinished compositematerial which retains all the beauty of naturalhardwood—oak, walnut and ash—but is pro-vided with a hard, lustrous acrylic surface. Thisis achieved by impregnating the wood withacrylic plastic and hardening it by irradiation.The composite has twice the resistance toindentation and several times the resistance toabrasion as the same hardwood finished con-ventionally. Acrylic/Wood is laminated fromstrips so as to obtain greater strength and con-tinuous, uniform lengths.

DOWEL

Scale: 6" = 1'-0"

SLEEVE ANCHOR BOLT 3⁄8" x 3" Steel

The sleeve anchor bolt is an all steel, rust-proofed multipurpose anchor bolt intendedfor use in a wide range of masonry materials. The 3⁄8" bolt is recommended for use withheavy-duty floor flange 876.

ACRYLIC/WOOD16' lengths

800 Aluminum For use with Acrylic/Wood handrail


3" 5⁄16"

SCOTCH-WELD® EPOXY ADHESIVECatalog No. 3M EC-2216 B/A, Clear Amber Recommended for splice joints.

Cans—1 qt. total Tubes—4 oz. total

2"

3⁄3 4⁄4⁄ "

6"

1 ⁄14⁄4⁄"

15⁄8"

71 ⁄2"

Walnut

Ash

Oak


8662 Oak Acrylic/WoodFittings: N 4.27 lb/ft


8571 Oak Acrylic/WoodAluminum 3.34 lb/ft

Fittings: N (874)

Aluminum spine has a clear anodized finish. AA-M10-C22-A31 (204R1.)



8523 Ash Acrylic/Wood3.48 lb/ft



STEEL


ACRYLIC / WOOD POSTS AND FLANGES

65

ALUMINUM

ACRYLIC / WOOD

6"48

"

33⁄4"

17 ⁄8"

71 ⁄2"

52"

33⁄4"

17 ⁄8"

33⁄4"

17 ⁄8"

13⁄4" 1⁄8"

17 ⁄8"

Drilled for #10 screw

Slotted holes for vertical adjustmentAluminum spine has a clear anodized finish AA-M10-C22-A31 (204R1).

33 ⁄8"

3 ⁄4"

51⁄4"

1 ⁄4"

51 ⁄8"

35 ⁄8"

21 ⁄2"

9 ⁄16"

55⁄8"

4"

7⁄16" hole

5"61 ⁄2"

3 ⁄8"

stai

nles

s st

eel m

achi

ne s

crew

s

f

11⁄4"

e

Railing post

Fascia bracket

1⁄4" stainlesssteel machine

screws

Lower post cap

This heavy-duty floor flange is for use with Acrylic/Woodposts when embedment is not possible. Additional lateralbracing or end support is usually required.

On fascia mounted posts 881 and 882, lower end of metal spine is partly exposedto accept fascia flange. Provision is made for vertical adjustment. Upper end of postis trimmed to required height before post cap is attached. On floor mounted posts 871 and 872, 6" of aluminum spine is exposed for grout-ing in concrete. For surface mounting with heavy-duty floor flange, cut off exposedend of spine or cut post from full 16' length.

PRECUT ACRYLIC / WOOD POSTS

POST CAPS

COVER FLANGE

HEAVY-DUTY FLOOR FLANGE

FASCIA BRACKETS


871 Oak Acrylic/Wood872 Walnut Acrylic/Wood


874 AluminumFor posts 871, 872, 881 and 882

875 AluminumFor posts 881 and 882

Upper Cap Lower Cap

877 AluminumFits Acrylic/Wood posts

876 AluminumFits Acrylic/Wood posts

e f878 Aluminum 1⁄2" 21⁄4"879 Aluminum 11⁄2" 31⁄4"

Aluminum items are suitable for anodizing.


SPLICE INSERT

4" 1"

1"2"

104 AluminumAlso available in 16' lengths without holes or set screws 104-16.

105 Aluminum

CORNER SPLICE INSERTCast, Almag 35

JuliusBlum&Co.Inc.


ALUMINUM

CARLSRAIL® SYSTEMS FOR NON-WELDED ASSEMBLY

SplicingAn internal splice is used to attach corner bends and wall returns, as aconnector for continuous runs and for expansion joints. A set screwtightens and draws components together.

A slip fit support bar adds both verti-cal and horizontal stiffness to thehandrail mouldings, when required.

Carlsrail® handrail sections may also bemounted using channeland then applieddirectly to the top of a picket or post.

1"

a

4"

21 ⁄2"

a

1⁄8" × 1" flat

6532 handrail

11⁄4" × 1⁄2" × 1⁄8" channel

Square bar

11⁄2"

3⁄4"

2"

3⁄4"

21⁄2"

3⁄4"1"

17 ⁄8"

1"

CARLSRAIL® HANDRAIL 20' lengths

END CAP

CORNER BEND

a6531C Aluminum 11⁄2"6530C Aluminum 2"6532C Aluminum 21⁄2"

a6531N Aluminum 11⁄2"6530N Aluminum 2"6532N Aluminum 21⁄2"

Cut as required foruse as a wall return.




SUPPORT BAR6063-T6


The Fannin Library at Phoenix College, Phoenix, AZFabricator: Bernie’s Brass, Inc., Phoenix, AZArchitect: Durrant Architects


67

CARLSRAiL® SYSTEMS foR non-wELdEd ASSEMbLY


ALUMINUM

pvc

carlsrail®BracketAssemblyThe carlsrail® bracket assembly has a two-part clamp which, in slipping together, engages the bracket arm and the handrail simulta-neously, without drilling or tapping. It aligns itself on the handrail and tilts to the required stair or ramp angle.

3"

a

þ" tapped hole

1½"

1"

PlasterExpansionshield

372 bracket filler

cARLStAdt®Self-Aligning WALLBRAcKEtSSatin Finish

aŽ"

1"

½" tapped hole

½" tapped hole


aŽ"

1"


aŽ"

1"

½" tapped hole


aŽ"

b

þ" tapped hole

c tapped hole

aŽ"

b

þ" tapped holec std. thread

c tapped hole

aŽ"

b

þ" tapped holec std. thread

c tappedhole

c std. thread

cARLStAdt®BRAcKEtEXtENSIONSSatin Finish

For Post Brackets For Wall Brackets

a

1"

½" std. threadstainless stud

Ž"

1½"1¾"

a171 Aluminum 2¼"172 Aluminum 2¾"

½"¼"

Ž"

1⁄2"1⁄4"

5⁄8"

Flexiblepvcchannel 50' coils

8106 Aluminum .276 lb/ft8206 Aluminum Anodized

8107 Aluminum .138 lb/ft8207 Aluminum Anodized

8708 Flexible PVC 90 durometer

GLAZINGMEMBERSAluminum glass stop/snap-in and flexible PVC glazing chan-nel serve to mount panels of ¼" glass, plastic, wire mesh, or other material.

111⁄32"

¾"Þ"

111⁄32"

¾"Þ"

23⁄32"

23⁄32"

GlassStop20' lengths

Snap-in20' lengths

Extensions may be cut to length to suit individual conditions. Trim Wall Bracket Extensions to no shorter than 15⁄8". Designers should note that extending a bracket increases stress at its base and reduces allowable load.

a b c462* Aluminum 1¾" 1" ¾"463* Aluminum 3" 1" ¾"

a b c464 Aluminum 1¾" 1" ¾"465 Aluminum 3" 1" ¾"

cARLStAdt®Self-Aligning pOStBRAcKEtSSatin Finish

For use with carlsrail® handrail moulding

For use with carlsrail® handrail moulding.

WallBracketdetailWall brackets match the post brackets, except that they come with a wall flange. Rear of wall bracket is tapped to receive an anchoring bolt. Wall bracket arm and flange may be disassembled to permit insertion of bracket extension (see above).

a173 Aluminum 3"174 Aluminum 3½"175 Aluminum 2¼"

* Also available in clear anodized AA-M10-C22-A31 (204R1)


JuliusBlum&Co.Inc.


ALUMINUM

CARLSTADT® POST SYSTEMS

2"

13 ⁄8"

48"

11⁄4"

11 ⁄4"

48"

23⁄4"

11 ⁄4"

48"

2"

13 ⁄8"

11⁄4"

11 ⁄4"

23⁄4"

11 ⁄4"

423 Aluminum 424 Aluminum 427 Aluminum

6423 Aluminum 6424 Aluminum 6427 Aluminum1.876 lb/ft 4.124 lb/ft 2.256 lb/ft

PRECUT SOLID ALUMINUM POSTS Aluminum 6063-T52, Mill Finish, 48'' lengthsUpper end has been trimmed as shown – no post cap is required. Lower end may be cut to achieve required post height. Drill and tapto receive Carlstadt® handrail brackets.

BAR STOCK FOR RAILING POSTS Aluminum 6063-T52, 20' lengths, except as noted

23 ⁄34⁄4⁄"

3 ⁄34⁄4⁄"

23⁄3 4⁄4⁄ "

23 ⁄4"

3 ⁄4"

41⁄4"

27 ⁄78⁄8⁄"

3 ⁄34⁄4⁄"

31⁄1 2⁄2⁄ "

773 Aluminum Fits aluminum posts 423 and 6423

777 Aluminum Fits aluminum posts 427 and 6427

774 Aluminum Fits aluminum posts 424, 6424 and 6434

COVER FLANGESSatin Finish

Post 424

Cover flange 774

Grout

Sleeve

Installation DetailsPost is set in metal sleeve in concrete and grouted.Embed post to a depth of 4" to 6" in slab. Allow for a1" grout pad beneath post. Sleeve should provideample clearance around post for grouting and toallow for adjustment to field variations. For outdoorinstallations, weep holes should be drilled in the poststo prevent water from collecting below ground level.A cover flange conceals the floor opening.




ALUMINUM

23⁄4"5⁄8" 5⁄8"4"

1 ⁄2"

2"

3⁄8"–16" × 1"machinescrews

7⁄16"holes

23⁄4"5⁄8" 5⁄8"4"

1 ⁄2"

37 ⁄16"

3⁄8"–16"×1"machinescrews

7⁄16"holes

11⁄2"

1⁄2"

31 ⁄2"

11 ⁄4"

31 ⁄4"

2"6"

4"

31 ⁄2"

11 ⁄4"

31 ⁄4"

2"6"

4"

21⁄2"3⁄4" 3⁄4"4"

11 ⁄2"

311⁄16

"3⁄8"–16"×2"machinescrews

7⁄16"holes

426 AluminumFits aluminum posts 427 and 6427

408 AluminumFits aluminum posts 424, 6424, 6434

421 AluminumFits aluminum posts 423 and 642321⁄2"3⁄4" 3⁄4"

4"

11 ⁄2"

215⁄16

"

3⁄8"–16" × 2"machinescrews

7⁄16"holes


1 ⁄2"

211⁄16

"

3⁄8"–16" × 1" machinescrews

23⁄4"5⁄8" 5⁄8"4"

7⁄16"holes


Elevation of 425 and 426 Elevation of 408, 421, and 422

Fascia flange 426 used with channel stringer.

Fascia flange 422 is similar.

Fascia flange 408 used withbox stringer.

Fascia flanges 421 and 425are similar.

FASCIA FLANGESSleeve type fascia flanges are provided with two clearances formounting on solid or channel fascias and stringers. The post slips intothe pocket of the fascia flange and is anchored with concealed setscrews. The bottom extension of each fascia flange matches the profile of the post and is trimmed to match its top.


JuliusBlum&Co.Inc.


ALUMINUM

BRONZE


1"

15 ⁄8"

3 ⁄16"

TUBING FOR FLOOR-MOUNTED POSTS 20' lengths, Mill Finish

lb/ft 6430 Aluminum .8994830 Bronze 2.950

436E Aluminum Fits aluminum post 430 or 830

PRECUT POST For fascia mounting, 51" lengths, Mill Finish● Aluminum 6063-T6● Bronze C38500

1⁄1 2⁄2⁄ "

Section B

Section A

71 ⁄18⁄8⁄"

51"

A

B

1"

15 ⁄58⁄8⁄"3 ⁄316⁄16⁄

"

430* Aluminum830* Bronze

* Cut and machined for use with fascia brackets.

REINFORCING BARSAluminum 6063-T6

18"

1.244"

.740

"

3"3 ⁄3

4⁄4⁄"

4"

1 ⁄14⁄4⁄"

432 Aluminum Fits aluminum post 430 and 830

2"

3⁄4" 1⁄4"

Tapped hole1⁄2" std. thread

Anchor plug 432

POST BRACKET ANCHOR PLUGS

FLOOR MOUNTED POST DETAILReinforcing bar is placed within mating hollow post. Post is set in metalsleeve in concrete and grouted. Embed post to a depth of 4" to 6" inslab. Allow for a 1" grout pad beneath post. Sleeve should provideample clearance around post for grouting and to allow for adjustmentto field variations. For outdoor installations, weep holes should bedrilled in the posts to prevent water from collecting below ground level.A cover flange conceals the floor opening.

Post 6430/4830

Cover flange 435/835

Reinforcing bar 436E

Grout

Sleeve

Aluminum items are suitable foranodizing, including most of the hard-coat color finishes. Properties of sec-tions for handrail posts are listed onpage 124. Refer to pages 123–130 fordetailed information on the structuraldesign of handrail installations.


435 Aluminum Fits aluminum post 430 or 6430835 Bronze Fits bronze post 830 or 4830




ALUMINUM STAINLESS

BRONZE

FASCIA BRACKETSMill FinishFascia brackets are available for concealed fastening of acrylic/woodand hollow posts of aluminum, bronze, and stainless steel—both forsolid and channel fascias. The fastening mechanism provides for verti-cal field adjustment.

5" 61 ⁄2"

1 ⁄2"

31 ⁄2"

a3⁄4"3 ⁄8

" st

ainl

ess

stee

l mac

hine

scr

ews

#10

MS

#6 FHMS

a428 Aluminum 1⁄2" For box stringers, Fits aluminum post 430429 Aluminum 11⁄2" For channel stringers, Fits aluminum post 430838 Bronze 1⁄2" For box stringers, Fits bronze post 830839 Bronze 11⁄2" For channel stringers, Fits bronze post 830

Fascia Bracket Assembly Detail

Fascia bracket is bolted to fascia.Slotted post slides into grooveson fascia bracket and is posi-tioned for proper height. Wedge isthen tightened to secure post inposition. Lower post cap is thenattached, completing assembly.

Upper Cap

431 Aluminum831 Bronze

Lower Cap

433 Aluminum833 Bronze

LOWER CAP

UPPER CAP

1 ⁄8"

11 ⁄4"

11 ⁄4"

Drilled for #6 FHMS

1"

15 ⁄58⁄8⁄"

1"

15 ⁄58⁄8⁄"

POST CAPSSatin FinishCaps for hollow Carlstadt® posts have a flange extending inside to receive and support the thread of the bracket arm.

POST ANCHOR FOR CAST STEPS

11 ⁄16"

5 ⁄8"

1"

Ctsk. for #10 FHMS

3⁄4" 3⁄4"

3⁄4"

21⁄2"

15⁄8"

11 ⁄8"

7 ⁄8"

1"

3⁄4"

3⁄4"

3⁄4"

3⁄4"

#6 FHMS

152 Aluminum For Carlstadt® T-handrail, Fits aluminum posts 430 and 6430

227 Stainless For use with aluminum and bronze railings

227 post anchor

Post Anchor InstallationAnchor is embedded in slab with anchorcentered vertically in slab thickness. Frontface of anchor should be flush with edge ofslab. Square nuts move freely in pockets,receive 3⁄8" mounting bolts of Carlstadt®

fascia brackets. Wide slots provide for lat-eral adjustment and vertical alignment.

CENTER POST BRACKETSSatin FinishMill Finish

Center post brackets permit handrail to be centered directly over post, while allowing thebracket to tilt to conform to stair incline. Bracket is secured to post with pin or screw.

61 ⁄2"

5"11 ⁄4

"

3⁄4"

3"

6"

Square nut, top and bottom, to receive 3⁄8" bolt from fascia brackets

Post anchor 227 can be used with fascia brackets 428, 429, 838, 839 or to mountCarlstadt® Aluminum or Bronze posts. Cast post anchor into concrete with minimumslab thickness of 3" and minimum compressive strength of 3500 psi. Maximum recommended post spacing for 3" slabs is 30"; for slabs 4" thick and thicker, recom-mended maximum post spacing is 48".

Fits aluminum posts 430 and 6430 and bronze posts 830 and 4830

Post

FasciaBracket

Lowerpost cap

161 Aluminum Curved for pipe, Fits aluminum posts 430 and 6430162 Aluminum Flat for moulding, Fits aluminum posts 430 and 6430


JuliusBlum&Co.Inc.


ALUMINUM


13⁄8 "

2"


lb/ft 6458 Aluminum 1.326

436E AluminumFits aluminum post 458

PRECUT POST For fascia mounting, 51" lengths, Mill Finish● Aluminum 6063-T6

13⁄3 8⁄8 ⁄

2"

Section B

71 ⁄18⁄8⁄"

51"

A

B

1⁄1 2⁄2⁄ "

458 Aluminum* Cut and machined for

use with fascia brackets.


18"

1.244"

.740

"

495 Aluminum Fits aluminum post 458 or 6458

432 Aluminum Fits aluminum post 458

2"

3⁄4" 1⁄4"


Anchor plug 432



Post 6458

Cover flange 495

Grout

Sleeve




27 ⁄78⁄8⁄"

37 ⁄78⁄8⁄"

3 ⁄34⁄4⁄"

41⁄1 4⁄4⁄ "

14"




ALUMINUM

STAINLESS


5" 61 ⁄2"

1 ⁄2"

31 ⁄2"

a3⁄4"

3 ⁄8"

stai

nles

s st

eel m

achi

ne s

crew

s

#10

MS

#6 FHMS

LOWER CAP

UPPER CAP

1 ⁄8"

11 ⁄4"

11 ⁄4"

Drilled for #6 FHMS




227 post anchor

Post Anchor InstallationAnchor is embedded in slab withanchor centered vertically in slabthickness. Front face of anchorshould be flush with edge of slab.Square nuts move freely in pock-ets, receive 3⁄8" mounting bolts ofCarlstadt® fascia brackets. Wideslots provide for lateral adjustmentand vertical alignment.

a428 Aluminum 1⁄2" For box stringers, Fits aluminum post 458429 Aluminum 11⁄2" For channel stringers, Fits aluminum post 458

61 ⁄2"

5"11 ⁄4

"

3⁄4"

3"

6"


Post anchor 227 can be used with fascia brackets 428 and 429 to mount Carl-stadt® Aluminum or Bronze posts. Cast post anchor into concrete with minimum slabthickness of 3" and minimum compressive strength of 3500 psi. Maximum recom-mended post spacing for 3" slabs is 30"; for slabs 4" thick and thicker, recommendedmaximum post spacing is 48".

Upper Cap


13⁄8 "

2"

Lower Cap


13⁄8 "

2"

Post

Fascia bracket

Lower post cap

Fascia Bracket Assembly DetailFascia bracket is bolted to fascia. Slotted post slides into grooves onfascia bracket and is positioned for proper height. Wedge is then tight-ened to secure post in position. Lower post cap is then attached, com-pleting assembly.


JuliusBlum&Co.Inc.


ALUMINUM


11⁄4 "

21 ⁄4"


lb/ft 6459 Aluminum 1.240

436E AluminumFits aluminum post 459

PRECUT POST For fascia mounting, 51" lengths, Mill Finish● Aluminum 6063-T6

21 ⁄14⁄4⁄"

Section B

11⁄1 4⁄4 ⁄

21 ⁄14⁄4⁄"

71 ⁄18⁄8⁄"

51"

A

B

1⁄1 2⁄2⁄ "

459* Aluminum* Cut and machined for

use with fascia brackets.


18"

1.244"

.740

"

496 Aluminum Fits aluminum post 459 or 6459


2"

3⁄4" 1⁄4"


Anchor plug 432



Grout

Sleeve

Post 6459

Cover flange 496




31 ⁄12⁄2⁄"

3 ⁄34⁄4⁄"

41⁄1 2⁄2⁄ "

1 ⁄14⁄4⁄"




ALUMINUM

STAINLESS


5" 61 ⁄2"

1 ⁄2"

31 ⁄2"

a3⁄4"

3 ⁄8"

stai

nles

s st

eel m

achi

ne s

crew

s

#10

MS

#6 FHMS

Post

Fascia bracket

Lower post cap

Fascia Bracket Assembly DetailFascia bracket is bolted to fascia. Slotted post slides into grooves onfascia bracket and is positioned for proper height. Wedge is then tight-ened to secure post in position. Lower post cap is then attached, com-pleting assembly.

LOWER CAP

UPPER CAP

1 ⁄8"

11 ⁄4"

11 ⁄4"

Drilled for #6 FHMS




227 post anchor

Post Anchor InstallationAnchor is embedded in slab withanchor centered vertically in slabthickness. Front face of anchorshould be flush with edge of slab.Square nuts move freely in pock-ets, receive 3⁄8" mounting bolts ofCarlstadt® fascia brackets. Wideslots provide for lateral adjust-ment and vertical alignment.

a428 Aluminum 1⁄2" For box stringers, Fits aluminum post 459429 Aluminum 11⁄2" For channel stringers, Fits aluminum post 459

61 ⁄2"

5"11 ⁄4

"

3⁄4"

3"

6"


Post anchor 227 can be used with fascia brackets 428 and 429 to mount Carl-stadt® aluminum or bronze posts. Cast post anchor into concrete with minimum slabthickness of 3" and minimum compressive strength of 3500 psi. Maximum recom-mended post spacing for 3" slabs is 30"; for slabs 4" thick and thicker, recommendedmaximum post spacing is 48".

Upper Cap


11⁄1 4⁄4 ⁄ "

21 ⁄14⁄4⁄"

Lower Cap


11⁄1 4⁄4 ⁄ "

21 ⁄14⁄4⁄"


JuliusBlum&Co.Inc.


ALUMINUM

STAINLESS


1"

2"

.062

"

.062

"

1"

11 ⁄12⁄2⁄"

TUBING FOR FLOOR-MOUNTED POSTS 20' lengths, 2B Mill Finish

Stainless Tubing

a 294 Aluminum 1.34"

Fits aluminum post 230

a 295 Aluminum 1.84"

Fits aluminum post 280

PRECUT POST For fascia mounting, 51" lengths, 2B Mill Finish● Stainless Type 304

5"

2"51

"

1"

11 ⁄2"

1"

2"

.062"

.062"

REINFORCING BARS

22"

a

.85"

33 ⁄34⁄4⁄"

9 ⁄916⁄16⁄

"

33⁄3 4⁄4⁄ "

237 Stainless Fits stainless post 230 or tubing285 Stainless Fits stainless post 280 or tubing



Reinforcing bar 294

Post 230

Cover flange 237

Grout

Sleeve

Properties of sections for handrail postsare listed on page 124. Refer to pages123–130 for detailed information on thestructural design of handrail installations.


230* Stainless

280* Stainless* Cut and punched for fascia block.

a b238 Aluminum 1.34" 11⁄8" Fits with stainless post 230279 Aluminum 1.84" 11⁄4" Fits with stainless post 280

3 ⁄4"

Tappedhole1⁄2" std.thread

b

a




ALUMINUM

STAINLESS

ANCHOR BAR WITH LOWER POST CAPMill Finish

227 with spacer block

Anchor bar and post holes mate with spacer block bolts and lock together with screw through lower post cap.

Stainless steel post slips over anchor bar

Fascia Spacer Block AssemblyThe spacer block is first fastened to the stringer. The keyhole in theanchor bar aligns with the holes in the tubular post. Post and anchorbar assembly are then fed over the bolt heads, into the keyhole slot andseated manually. Final tightening is achieved by drawing up the tight-ening screw in the lower post cap.

UPPER POST CAPSatin Finish

FASCIA SPACER BLOCKSatin Finish



227 post anchor

Post Anchor InstallationAnchor is embedded in slab withanchor centered vertically in slabthickness. Front face of anchorshould be flush with edge of slab.Square nuts move freely in pock-ets, receive 3⁄8" mounting bolts ofCarlstadt® fascia brackets. Wideslots provide for lateral adjust-ment and vertical alignment.

61 ⁄2"

5"11 ⁄4

"

3⁄4"

3"

6"


Post anchor 227 can be used with fascia brackets 428 and 429 to mount Carl-stadt® Aluminum or Bronze posts. Cast post anchor into concrete with minimum slabthickness of 3" and minimum compressive strength of 3500 psi. Maximum recom-mended post spacing for 3" slabs is 30"; for slabs 4" thick and thicker, recommendedmaximum post spacing is 48".

5"

a 1"

22"

5"61 ⁄2"

3 ⁄8"

spec

ial b

olt

hex

head

nut

a

a post233B Aluminum 11⁄2" 230

(With stainless steel lower post cap*)

283 Aluminum 2" 280(With stainless steel lower post cap*)

* Satin finish

a228 Stainless 1⁄2"

(Use with box stringers)

229 Stainless 11⁄2"(Use with channel stringers)

b 1⁄2" std.thread

a

Upper Cap a b231 Stainless 11⁄2" 11⁄4" Fits stainless post 230284 Stainless 2" 17⁄16" Fits stainless post 280


JuliusBlum&Co.Inc.


ALUMINUM

NICKEL-SILVER

POST SYSTEMS

23/4"

11 /4" .125"

23⁄4"

11 ⁄4".125"

23⁄4"

11 ⁄4"

.125"

TUBING FOR RAILING POSTSMill Finish

Aluminum6063-T6 20' lengths

6435 Aluminum 1.075 lb/ft Fittings: N

1334 Nickel-Silver 3.40 lb/ft Fittings: N

6434 Aluminum 1.123 lb/ft Fittings: N

Drawn pipe precut to post lengths.Clear anodized or mill finish

ct

Pipe Sched. Length c t7103 Aluminum 11⁄4" 10 38" 1.660" .109"7104 Aluminum 11⁄4" 10 50" 1.660" .109"7403 Aluminum 11⁄4" 40 38" 1.660" .140"7404 Aluminum 11⁄4" 40 50" 1.660" .140"7203 Aluminum 11⁄2" 10 38" 1.900" .109"7204 Aluminum 11⁄2" 10 50" 1.900" .109"7503 Aluminum 11⁄2" 40 38" 1.900" .145"7504 Aluminum 11⁄2" 40 50" 1.900" .145"

Pipe Sched. b7162 Aluminum 11⁄4" 10 1.427"7462 Aluminum 11⁄4" 40 1.360"7262 Aluminum 11⁄2" 10 1.667"7562 Aluminum 11⁄2" 40 1.585"

HIGH STRENGTH CONNECTORAIL® POSTSAluminum only, Alloy 6063-T832

NominalSize Sched. OD ID t lb/ft11⁄4" 10 1.660" 1.442" .109" .62511⁄4" 40 1.660" 1.380" .140" .78511⁄2" 10 1.900" 1.682" .109" .72111⁄2" 40 1.900" 1.610" .145" .940

t

OD

DRAWN ALUMINUM HANDRAIL PIPEAluminum Alloy 6063-T832, 20' lengths

This premium quality drawn pipe has an extra smooth surface. Its harder tempergives it high strength. See pages 14-29 for stock pipe fittings. Available in clearanodized or mill finish.

23 ⁄34⁄4⁄"

3 ⁄34⁄4⁄"

41⁄1 4⁄4⁄ "

774 Aluminum Fits posts 424, 6424 and 64341374 Nickel-Silver Fits nickel-silver post 1334



d

c

b

PIPE ANCHOR PLUGS

Anchor plugs provide secure mounting for brackets supporting second or third rails.Aluminum anchor plugs are machined from solid extruded stock; the stainless steelanchor plug is fabricated from heavy metal.

2"

b

Aluminum

1⁄2" tapped hole

Post cap

Anchor plug

Nickel-SilverC79800 16' lengths

23 ⁄4"

3 ⁄4"

41⁄4"

Pipe c d710* Aluminum 11⁄4" 1.688" 313⁄16"711* Aluminum 11⁄2" 1.938" 4"





ALUMINUM

NICKEL-SILVER

Pipe Sched. c7180* Aluminum 11⁄4" 10 1.660"7480* Aluminum 11⁄4" 40 1.660"7280* Aluminum 11⁄2" 10 1.900"7580* Aluminum 11⁄2" 40 1.900"


11 ⁄4"

1 ⁄8"

11⁄4"

c

Aluminum

1⁄2" tapped hole

11 ⁄4"

9 ⁄16"

11 ⁄4"

9 ⁄16"

23⁄4"

11 ⁄4"

23⁄4"

11 ⁄4"

25⁄8"

11 ⁄8"

POST CAPS Satin finishCaps for hollow Carlstadt® posts have a flange extending inside toreceive and support the thread of the bracket arm.

FASCIA FLANGESMill FinishSleeve type fascia flanges are provided for mounting on solid orchannel fascias and stringers. The post slips into the pocket of the

fascia flange and is anchored with concealed set screws. Thebottom extension of each fascia flange matches the profile of

the post and is trimmed to match its top.

6434N Aluminum

6435N Aluminum

1334N Nickel-Silver

31 ⁄2"

11 ⁄4"

31 ⁄4"

2"6"

4"

1⁄2"

Elevation of 408 Fascia flange 408 usedwith box stringer.

See page 69 for a complete range ofCarlstadt® fascia flanges.

23⁄4"5⁄8" 5⁄8"4"

1 ⁄2"

37 ⁄16"

3⁄8"–16"×1"machinescrews

7⁄16"holes

408 Aluminum Fits aluminum posts 6434

21⁄2"

11 ⁄16"

5 ⁄8"

11 ⁄4"

b

Assembly DetailsAngle may be adjusted as required

Pipe Sched. c b144 Aluminum 11⁄4" 40 1.660" 15⁄8"145 Aluminum 11⁄2" 40 1.900" 15⁄8" See page 84 for a complete range of Carlstadt® center post brackets

Ctsk. for #10 FHMSipe 3⁄4"

c

CENTER POST BRACKETSMill Finish, For use in mounting of flat-bottomed handrail onto Connectorail® posts.

Bracket

Drive pinor screw


#10 FHMS


Post 11⁄2" Sch 40


80 JULIUS BLUM & CO., INC. 800 526 6293 www.juliusblum.com FAX 201 438 6003


BRONZE STAINLESS

CARLSTADT® POST BRACKETS

a

1Þ"

þ"þ"½" std. threadstainless stud

Ž" ¾"a

1Þ"


Ž" ¾"

a


Ž"

1¼"

¼"

1"Ctsk. for ¼" FHMS

2ð"3"

a


Ž"

1¼"

¼"


2ð"3"

For use with Carlstadt® T-handrail moulding. a309 Aluminum 3¼"312 Aluminum 2þ"

Pipe Size Schedule Clear Hole7161* Aluminum 1¼" all ½"7261* Aluminum 1½" all ½"8661 Bronze 1¼" all ½"8861 Bronze 1½" all ½"1361 Nickel-Silver 1½" all ½"9161 Stainless 1¼" all ½"9361 Stainless 1½" all ½"

*Also available in clear anodized AA-M10-C22-A31 (204R1)

Aluminum

1Þ"Post cap

Adapter Anchor plug

1"


1Þ"

½" clear hole

6435

7161

Post bracket

a

1Ð"

¾"

Ctsk. for #10 FHMS


Stainless detail

b

b

2½"


Ž"a

1Ð"

¾"

Ctsk. for #10 FHMS


Stainless detail

b

b

2½"


Ž"

SELF-ALIGNINGSatin Finish

POSTBRACKETADAPTERSatin Finish

For use with Carlstadt® T-handrail moulding. a439 Aluminum 2¼"440 Aluminum 2¾"

a b 441 Aluminum 2¼" 1Ž" 442 Aluminum 2¾" 1Ž" 841 Bronze 2¼" 1Ž" 1341 Nickel-Silver 2¼" 1Ž" 241 Stainless 2¼" 1Ž"

a

1"


Ž"

1½"1¾"

a

1"


Ž"

1½"1¾"

Designers should note that extending a bracket increases stress at its base and reduces its allowable load.

a b238 Aluminum 1.34" 1Þ" Fits with stainless post 230279 Aluminum 1.84" 1¼" Fits with stainless post 280

432 Aluminum Fits with posts 430,458,459and 830

aŽ"

1"

½" tapped hole

½" tapped hole


aŽ"

1"


aŽ"

1"

½" tapped hole

½" std. thread stainless stud Post a 462* Aluminum 1¾" 463* Aluminum 3" 862 Bronze 1¾" 863 Bronze 3" 245 Stainless 1¾" 246 Stainless 3" 1362 Nickel-Silver 1¾" 1366 Nickel-Silver 3"

Extensions may be cut to length to suit individual conditions. * Also available in clear anodized AA-M10-C22-A31 (204R1)

POSTBRACKETExTENSIONSSatin Finish

2"

¾" ¼"

Tapped hole½" std. thread

Anchor plug 432

POSTBRACKETANCHORPLUGS

For Pipe Post Anchor Plugs, see page 20.

¾"

Tapped hole ½" std. thread

b

a

For use with Carlsrail® handrail moulding. a171 Aluminum 2¼"172 Aluminum 2¾"


CARLSTADT® WALL BRACKETS AND EXTENSIONS



BRONZE STAINLESS

Designers should note thatextending a bracket increasesstress at its base and reducesits allowable load.

11 ⁄2"

1"

3"

a

3⁄8" tapped hole

For use with Carlsrail® handrail moulding.a

175 Aluminum 21⁄4"173 Aluminum 3"174 Aluminum 31⁄2"

3"

a

11 ⁄4"

1 ⁄4"

23⁄16"3"

1"

3⁄8" tapped hole

Ctsk. for 1⁄4" FHMS

For use with Carlstadt® handrail moulding.a

313 Aluminum 25⁄8"314 Aluminum 31⁄8"

3"

a

11 ⁄16"

3 ⁄16"

3⁄4"

3⁄8" tapped hole

Ctsk. for #10 FHMS

b

b21⁄2"

Stainless detail


a b443 Aluminum 3" 15⁄8"444 Aluminum 31⁄2" 15⁄8"844 Bronze 21⁄2" 15⁄8"843 Bronze 3" 15⁄8"

1343 Nickel-Silver 3" 15⁄8"271 Stainless 21⁄4" 113⁄16"243 Stainless 3" 113⁄16"

CARLSTADT® SELF-ALIGNING WALL BRACKETS Satin Finish

a5⁄8"

b

3⁄8" tapped hole

c tapped hole

c std. thread

WALL BRACKET EXTENSIONS Satin Finish

3"

a

11 ⁄8"

3⁄4"

3⁄8"3⁄8"

3⁄8" tapped hole

For use with Carlstadt® T-handrail moulding.a

418 Aluminum 3"419 Aluminum 31⁄2"


Tightening block

Bracket arm

Handrail flange

ADJUSTABLE BRACKET DETAILPost and upper post caps must be drilled and tapped to acceptbracket arm. Recess of bracket arm has flat sides to accommodatewrench, which permits tightening without marring exposed surfaces.Handrail flange tilts to adjust to stair angle and is attached to handrailwith machine screws. Pressure on tightening block prevents loose-ness and rattling.

Extensions maybe cut to length to suit individual conditions.* Also available in clear anodized AA-M10-C22-A31 (204R1)

† For use with 307, 308, 313, and 314 wall brackets.Trim Wall Bracket Extensions to no shorter than 15⁄8".

a b414* Aluminum† 13⁄4" 11⁄8"415* Aluminum† 3" 11⁄8"464 Aluminum 13⁄4" 1"465 Aluminum 3" 1"864 Bronze 13⁄4" 1"865 Bronze 3" 1"247 Stainless 13⁄4" 1"248 Stainless 3" 1"

1364 Nickel-Silver 13⁄4" 1"1365 Nickel-Silver 3" 1"


JuliusBlum&Co.Inc.



BRONZE STAINLESS

CARLSTADT® VERTICAL MOUNTING BRACKETS

3⁄8" Mounting bolt

Inner sleeve

* Also available in clear anodized AA-M32-C22-A31 (204R1).

4"

3"11⁄2"1⁄4"

1⁄4" hexsocket headset screw

Ctsk. for1⁄4" FHMSor flat headwood screw

3 ⁄4"

7⁄8"

3"

1"11⁄2"

2"1⁄4" hexsocket headset screw


TWO-PIECE MOUNTING BRACKETS Satin FinishFor wide wood handrails or metal handrails

160* Aluminum890 Bronze290 Stainless


11⁄2"

3 ⁄4"


3⁄8" hole7⁄8"

15⁄16"Ctsk. for 1⁄4" FHMS orflat head wood screw

7⁄16"

11 ⁄4"

15⁄16

"

11⁄2"

3 ⁄4"

11 ⁄4"

3 ⁄4"

3⁄8" hole7⁄8"

7⁄16"

Ctsk. for 1⁄4" FHMSor flat head wood screw

1⁄4" hex socket headset screw

TWO-PIECE MOUNTING BRACKETS Satin Finish

166* Aluminum896 Bronze196 Nickel-Silver296 Stainless

167 Aluminum For mounting to Acrylic/Wood posts

2"

7⁄8"

11 ⁄4"



3"

3⁄8" mounting bolt

Bracket 167 outer sleeve(attach with1⁄4" FHMS)

Bracket inner sleeve

11 ⁄4"

r 1 ⁄4"


1⁄4"–20" × 1" FHMS(by others)


Pipe ortubing

Tubularrivet

ADAPTERS

r Use With7164* Aluminum .830" 1.660" OD7264* Aluminum .950" 1.900" OD8864 Bronze .950" 1.900" OD8964 Bronze .750" 1.500" OD5264 Nickel-Silver .750" 1.500" OD5364 Nickel-Silver .950" 1.900" OD9164 Stainless .830" 1.660" OD9364 Stainless .950" 1.900" OD


3⁄8" Mounting bolt(by others)

Wall plate

Outer sleeve

1⁄4" set screw168* Aluminum898 Bronze298 Stainless



CARLSTADT® VERTICAL MOUNTING BRACKETS



BRONZE STAINLESS STEEL

13 ⁄8"

15⁄8"

Vertical mounting bracket 151 is designed for mounting handrail on edge to provide a wall guard or bumper. Carlstadt® T-handrailmouldings 6402, 6405 or 6407 can be mounted without drilling and tapping. Bracket is also suitable for mounting handrail on top of a para-pet or wall.

Assembledbracket

T-Handrail

#10 FHMS

3⁄8" bolt

Masonry wall

Bracket 151

Expansion shieldwith 3⁄8" lag screw

Handrail 6407

Assembly Detail

Installation Details

Masonry wall

Bracket 151

Handrail 6402

VERTICAL MOUNTING BRACKET Satin Finish

151 Aluminum* Also available in clear anodized AA-M10-C22-A31 (204R1)


Post 6430

Bracket 441

Handrail 6905

Bracket 163Gasket and panel,1⁄4" typical

Threaded Bushing Brackets are used with threaded studs,machine screws or bolts to installhandrails or panels. Bracketsmay be cut to length as required.Brackets are furnished with aluminum Phillips Truss Headmachine screws and washers.

3⁄8" tapped hole

3⁄8"–16"× 11⁄4" Phillips Truss Head MS with Washer

5⁄8" 7⁄8"2"

11⁄4"

3"

3⁄8" tapped hole

21⁄2"

13⁄4"

THREADED BUSHING BRACKETSSatin Finish

#10 FHMS3⁄8" hole

11⁄2"

11 ⁄4"

163 Aluminum63 Stainless


Use 3⁄8" machine screw, stud or hex head bolt for fastening to wall.

BOLTS AND ANCHORS for handrail wall brackets

Threaded Stud ● Steel 3⁄8" – 16 × 11⁄2"

Hanger Bolt ● Steel 3⁄8" × 3"

Hex Head Lag Screw● Aluminum 3⁄8" × 2"● Brass 3⁄8" × 2" (Plain or Finished)● Nickel-Silver 3⁄8" × 2" (Finished)● Stainless 3⁄8" × 2"

Post Bracket Hanger Bolt● Steel 5⁄16"× 11⁄2" / 1⁄2"–13× 3⁄8"

Expansion Shields (Lead) For setting 3⁄8" lag screws andhanger bolts in concrete, brick or stone.Drill hole size of 3⁄8" diameter by 21⁄2" deep.

Heavy-Duty Double Machine Bolt Anchor (Zinc Alloy)Non-calking machine bolt anchor for use in masonry materials of questionable strength or where heavy shear loads are encountered.

Thread accommodates 3⁄8" – 16 stud ormachine bolt (supplied by others). Drill holesize of 3⁄4" diameter by 21⁄4" deep. Bracket 164

Expansion shieldwith hanger bolt

Handrail




JuliusBlum&Co.Inc.


ALUMINUM

CARLSTADT® POST BRACKETS AND PANEL CLIPS

11 ⁄16"

5 ⁄8"

1"

Ctsk. for #10 FHMS

3⁄4" 3⁄4"

3⁄4"

21⁄2"

15⁄8"

11 ⁄8"

7 ⁄8"

1"

3⁄4"

3⁄4"

3⁄4"

3⁄4"

#6 FHMS

Center post brackets permit handrail to be centered directly over post, yet allow it totilt to conform to stair incline. Bracket is secured to post with pin or screw.

Flat Pipe Sched. c b144 Aluminum 11⁄4" 40 1.660" 15⁄8"145 Aluminum 11⁄2" 40 1.900" 15⁄8"

152 Aluminum for Carlstadt® T-handrail moulding

161 Aluminum Curved for pipe, Fits posts 430 and 6430162 Aluminum Flat for moulding, Fits posts 430 and 6430

CENTER POST BRACKETS Satin Finish, except as noted

Fits posts 430 and 6430

1"

1⁄2" 1⁄2"

1"

1 ⁄4"

3 ⁄8"

11 ⁄4"

11 ⁄8"

1"

1⁄4" Panel or mesh (by others)

PANEL CLIPSFor aluminum pipe only, Mill Finish or Clear Anodized

Pipe7260** Aluminum 11⁄2"

Packages of 4 sets

* 5' Length ** Two-piece assembly

Curved Pipe Sched. c b142 Aluminum 11⁄4" 40 1.660" 15⁄8"143 Aluminum 11⁄2" 40 1.900" 15⁄8"

For center mounting of pipe or rounded handrailonto aluminum Connectorail® posts.

Ctsk. for #10 FHMSCurved for pipe 3⁄4"

c

21⁄2"

11 ⁄16"

5 ⁄8"

11 ⁄4"

b

Installation Detail

For center mounting of flat-bottomed handrail onto aluminum Connectorail® posts or stainless steel pipe posts.

Tubularrivet

Panel clipPipe post

1⁄2"

11⁄4" Sch 40Post

144 Center post bracket6437

1⁄4" panel(by others)

Panelclip

710 Cover flange

Pipe7460-5* Aluminum 11⁄4"7460† Aluminum 11⁄4"7560-5* Aluminum 11⁄2"7560† Aluminum 11⁄2"† Packages of 4 pieces


ACRYLIC / WOOD INSTALLATION INSTRUCTIONS


A. CUTTINGBecause of the hardness and density of the Acrylic/Wood material andthe aluminum spine of the 8570 series moulding, metal-working equipmentis best suited to cut Carlstadt® Acrylic/Wood handrail mouldings.

The mouldings can be cut on a saw using a standard metal cuttingband saw blade (10 teeth to the inch, raker set) or a high speed cut-offsaw with an alloy steel or carbide tipped blade. To avoid chipping,apply masking tape or fiberglass reinforced, pressure sensitive tape tothe section to be cut and use a slow to moderate feed. After cutting,use naphtha to remove petroleum based lubricants or metal oxidesfrom the handrail moulding material.

B. SHAPING ENDS AND CORNERSIt is easy to remove sharpness from mitered corners and shape railingends to form attractive, smoothly contoured terminals. For initial roughremoval of material, use a wood rasp or a belt sander with #60 gritpaper. A stationary or portable belt sander-grinder or similar equip-ment works best.

To smooth the work to a polished finish, use sanding belts with successively finer grits in the following sequence: #100, #120, #150,#280. With some experience, it is possible to use #120 and #280 gritsanding belts only. Following final sanding with the #280 grit belt, buffthe moulding with a clean Iamb’s wool pad using an oil base lubricantsuch as Liquid Gold.

C. FORMING MITERS AND SPLICESMiter joints can be used to make vertical and horizontal directionchanges. More often, independent handrails are used on each flightwithout connections for changes in direction. If the mouldings aremounted securely on a metal subrail and joints are accurately cut, nodoweled connections between adjacent moulding sections are required.

If a metal subrail is not used, or if heavy traffic is anticipated, miterjoints and splices must be doweled and glued. The doweling and gluing technique forms strong joints that reveal only a circumferentialhairline. Epoxy structural adhesive is available from Julius Blum & Co.,

Inc. For maximum joint strength, apply epoxy adhesive liberally to allmating surfaces and press the handrail moulding sections firmlytogether. Surfaces must be clean before adhesive is applied. Carefullyremove all excess adhesive immediately. Structural adhesives can beapplied both in the shop and in the field.

For accurate mating of butting pieces, holes for dowels should belocated and drilled with the aid of a doweling jig.

D. ATTACHMENT TO SUPPORTING STRUCTURESCarlstadt® Acrylic/Wood handrail mouldings have exceptional screwholding power. Where fasteners smaller than 1⁄4" are required, use TypeAB sheet metal screws. Drill pilot holes the same size as required foraluminum. For larger fasteners (1⁄4" and up), the handrails can be drilledand tapped for machine screws. Under no circumstances must screwsbe inserted without prior drilling – they will split the material.

Carlstadt® Acrylic/Wood handrail mouldings can be post or wallmounted using Carlstadt® System posts and brackets, or the mould-ings can be adapted to custom designed supporting structures.

Carlstadt® Acrylic/Wood 8570 series mouldings must be attachedby tapping into the aluminum spine. Attachment to the Acrylic/Woodalone could cause the facing to pull away from the spine. Direct attach-ment to the metal spine insures a high strengthstructural connection.

E. PROTECTION AND FINISHINGMouldings are shipped individually wrapped in a paper or plasticsleeve, which should be left in place as long as possible for protection.

F. MAINTENANCENormal maintenance requires only periodic cleaning with an oil-basefurniture polish. Luster can be maintained by using light hand buffingwith a soft cloth or by mechanical buffing with a lamb’s wool pad.

Nicks, scratches or burn marks can be removed by sanding (finish-ing with #280 grit) and the finish restored to the original luster by buffing.

SLEEVE ANCHOR BOLTThe sleeve anchor bolt is an all-steel rust-proofed multi-purposeanchor bolt intended for use in a wide range of masonry materials. The3⁄8" bolt is recommended for use with heavy-duty floor flange 876. Toinstall, drill a 3⁄8" hole in concrete or masonry to 3" depth. Drill holeswhich conform to ANSI standard carbide bit dimension (.390" to .398").Clean out dust in hole after drilling. Insert sleeve bolt in hole, handtighten, then tighten with wrench to a maximum torque of 30 ft. lbs.

FABRICATION AND INSTALLATION PROCEDURE


JuliusBlum&Co.Inc.


HANDRAIL BRACKETS

WALL, BUSHING AND POST BRACKETS

For convenience and ease of reference, all of the handrail bracketswhich appear in various sections of our catalog are brought together inthis section. Included are brackets for wall, post, center rail and verti-cal mounting; for use with moulding or flat bars; for pipe railings; andfor specific applications.

Aluminum: Cast brackets are made of high-strength alloyAlmag 35—suitable for clear anodizing. Extruded and machinedbrackets are of alloy 6063—suitable for anodizing, including most ofthe hard coat anodic processes (black anodizing may result in consis-tent matches; consult your anodizer before specifying). All, except asnoted, are satin finished. Pipe rail brackets are stocked with a clearanodized finish—AA-M32-C22-A31 (204R1)—as well as plain. Alu-minum brackets cover a wide range of applications, including wall andpost mounted brackets, brackets for center rails and brackets for vertical mounting of rails or panels.

Bronze: Cast brackets are made of alloy C86500 for close colormatch with extruded architectural bronze C38500 and red brass

C23000. Extruded and machined brackets are of C38500. All, exceptas noted, are satin finished and lacquered.

Nickel-Silver: Cast brackets closely match extruded nickel-silver handrails. Extruded and machined brackets are of alloy C79800.All, except as noted, are satin finished and lacquered.

Stainless Steel: Brackets are made of 18-8 chrome-nickelalloy, stainless type 304, for high corrosion resistance. All, except asnoted, are satin finished.

Malleable Iron and Stamped Steel: All types are stocked withflat top member for mouldings and with curved top member for piperails. They may be welded or mechanically fastened to the rail. Pipe railbrackets are supplied galvanized as well as plain.

Julius Blum & Co., Inc.’s handrail brackets have been designed tomeet or exceed accepted safety standards and have been laboratorytested. Test results are available upon request.

Fasteners, except as noted, are not included. All items are carriedin stock in substantial quantities and are available for prompt shipment.

Aluminum Carlstadt® Post Brackets (center bracket with extension)

Glass Mounted Handrail Adapter Kit with bronzeCarlstadt® bracket

The Fannin Library at Phoenix College, Phoenix, AZArchitect: Durrant ArchitectsFabricator: Bernie’s Brass, Inc., Phoenix, AZ


WALL, BUSHING AND POST BRACKETS

HANDRAIL BRACKETS


CAST, STAMPED, AND EXTRUDED WALL BRACKETSThese wall brackets are more traditional in style and may beused in a multitude of applications. The various styles allow forconcealed fastening or by attachment with a single 3⁄8" mountingbolt through the wall flange center.

CARLSTADT® SELF-ALIGNING WALL BRACKETSThese wall brackets, available in aluminum, bronze, nickel-silver,and stainless steel, are self-aligning. Once the concealed wallattachment is made, the bracket yoke—which attaches to thehandrail—rotates freely until the chosen handrail is properlyaligned. Various styles are available to coordinate with differenthandrail styles and with pipe railings.

VERTICAL MOUNTING BRACKETSThe mounting brackets are useful for mounting handrails verticallyas in an elevator cab or hospital corridor. These brackets are oftenused with wood handrails, vertically mounted. They are also suit-able for mounting handrails on top of a parapet or knee wall.Adapters are available to permit attachment to pipe or round tube.

CARLSTADT® SELF-ALIGNING POST BRACKETSPost brackets, available in aluminum, bronze, nickel-silver, andstainless steel, are post-mounted variations of the Carlstadt®

wall brackets. A solid post is prepared by drilling and tapping toprovide a match to the 1⁄2" stainless stud included as part of thebracket. The stainless stud may be replaced with a post brackethanger bolt for attachment to a wood post. Hollow posts require aclear hole to be drilled with a tapped post cap or anchor pluginserted to accept the stud.

313

843

439

171

1341

222

63 296

898

151

164

160 161

144

309

322

307

418

370 275 384

1622 306 478

173

321


88

2¾"

2¾"

a 1"¾" 1¾"

Hole for#10 MS

ł" clear hole


ALUMINUM NICKEL-SILVER TITANIUM

BRONZE STAINLESS MALLEABLEIRON/STEEL

WALL BRACKETS

a b381 Malleable Iron 2½" 2¾"305 Malleable Iron 3" 3¼"

CASTEXTRUDED–UNPOLISHED

STAMPED

WALLBRACKETFILLER

a 621 Steel 2½" 625 Steel 3" 1021† Stainless 2½"

† Burnished

b

a

c

1þ"2"ý"

þ" tapped hole

Ctsk. for #10 FHMS

a

4"

1½"

2½"

cb¾"

Ctsk. for #10 FHMS

ł" clear hole

b

a

2ð"

1þ"ý" 2"

ł" hole

Ctsk. for #10 FHMS

b

a

2ð"

1þ"ý" 2"

ł" hole

Ctsk. for #10 FHMS

1Ð" 2½"

¾"Plaster

372 Bracket filler 372 Cast Iron

a b c371 Aluminum 2½" 3Þ" 1Š"302 Aluminum 3Þ" 3¾" 1ž"370 Bronze 2½" 3Þ" 1Š"304 Bronze 3Þ" 3¾" 1ž"170 Nickel-Silver 2½" 3Þ" 1Š"270 Stainless 2½" 3Þ" 1Š"377 Malleable Iron 2½" 3Þ" 1Š"385 Malleable Iron 3" 3Þ" 1Š"

a b383 Aluminum 2½" 2¾"315 Aluminum 3" 3¼"387 Bronze 2½" 2¾"317 Bronze 3" 3¼"1087 Stainless 2½" 2¾"

Set bracket filler in plaster wall before mounting handrail bracket.

a b c477 Aluminum 2½" 2" 1"497 Aluminum 3" 2" 1"891 Bronze 2½" 2" 1"893 Bronze 3" 2" 1"193 Nickel-Silver 3" 2" 1"217† Stainless 2½" 2" 1"219† Stainless 3" 2" 1"9977 Titanium 2½" 1½" 1"

†Satinfinish

89

WALL BRACKETS FOR PIPE RAILINGS



BRONZE STAINLESS MALLEABLEIRON/STEEL

b

a

c

1þ2"

þ" tapped hole

Ctsk. for #10 FHMS

ý"

b

a

c

1þ"2"

þ" tapped hole

Ctsk. for #10 FHMS

ł" clear hole

a

Ý" r

2¾"

3"

1"1¾"

Hole for #10 MS

2¾"

ł" clear hole

3"

a1"

1¾"

Ý" r

Hole for #10 MS

¾"

b

a

2ð"

1þ"2"

7⁄16" hole

Ctsk. for #10 FHMS

b

a

2ð"

1þ"2"

ł" hole

Ctsk. for #10 FHMS

ý"

b

a

2¼"

1þ"2"

ł" clear hole

Ctsk. for #10 FHMS

ý"

b

a

2¼"

1þ"2"

ł" clear hole

Ctsk. for #10 FHMS

a 1"2"

Ctsk. for #10 FHMS

a

1"2"

Ctsk. for #10 FHMS

4"

4"

1½"

1½"

2½"

2½"

ł" clear hole

ł" clear hole

a b c 376• Aluminum 2½" 3Þ"19⁄16" 389• Aluminum 3Þ" 3¾" 1ž" 375 Bronze 2½" 3Þ"19⁄16" 319 Bronze 3Þ" 3¾" 1ž" 176 Nickel-Silver 2½" 3Þ"19⁄16" 275 Stainless 2½" 3Þ"19⁄16" 378 Malleable Iron 2½" 3Þ"19⁄16"1378* Malleable Iron (Galvanized) 2½" 3Þ"19⁄16" 386 Malleable Iron 3" 3Þ"19⁄16"1386* Malleable Iron (Galvanized) 3" 3Þ"19⁄16"

a b384• Aluminum 2½" 2¾"316• Aluminum 3" 3¼"388 Bronze 2½" 2¾"318 Bronze 3" 3¼"1088 Stainless 2½" 2¾"

a b 382 Malleable Iron 2½" 2¾"1382* Malleable Iron (Galvanized) 2½" 2¾ 306 Malleable Iron 3" 3¼" 1306* Malleable Iron (Galvanized) 3" 3¼"

a478• Aluminum 2½"892 Bronze 2½"192 Nickel-Silver 2½"218* Stainless 2½"

a498• Aluminum 3"894 Bronze 3"220* Stainless 3"

* Satin finish

a 622 Steel 2½" 1622* Steel (Galvanized) 2½" 1022† Stainless 2½" 626 Steel 3" 1626* Steel (Galvanized) 3" 1026† Stainless 3"

• Clear anodized, AA-M10-C22-A31 (204R1) finish.* Galvanized brackets may require redrilling and tapping of holes fouled by zinc.

† Burnished.

CASTEXTRUDED–UNPOLISHED

STAMPED

b

a

2ð"

1þ"2"

7⁄16" hole

Ctsk. for #10 FHMS

b

a

2ð"

1þ"2"

ł" hole

Ctsk. for #10 FHMS

ý"


CARLSTADT® SELF-ALIGNING WALL BRACKETS

3"

a

þ" tapped hole

1½"

1"

3"

a

þ" tapped hole

1½"

1"

For use with Carlsrail® handrail moulding a175 Aluminum 2¼"173 Aluminum 3"174 Aluminum 3½"

3"

a

1¼"

¼"2ð"

3"

1"

þ" tapped hole


3"

a

1¼"

¼"2ð"

3"

1"

þ" tapped hole


For use with Carlstadt® handrail moulding a313 Aluminum 2Ž"314 Aluminum 3Þ"

3"

a

1Ð"

ð"

b

b2½"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Stainless detail


3"

a

1Ð"

ð"

b

b2½"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Stainless detail


a b 443 Aluminum 3" 1Ž" 444 Aluminum 3½" 1Ž" 842 Bronze 2¼" 1Ž" 844 Bronze 2½" 1Ž" 843 Bronze 3" 1Ž"1343 Nickel-Silver 3" 1Ž" 271 Stainless 2¼" 1Ý" 243 Stainless 3" 1Ý"

3"

a

1¼"

2ð"3"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

3"

a

1¼"

2ð"3"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

3"

a

1Ð"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Ý" r

b2½"


b

Stainless detail

3"

a

1Ð"

¾"

þ" tapped hole

Ctsk. for #10 FHMS

Ý" r

b2½"


b

Stainless detail

3"

a

1Þ"

¾"

þ"þ"

þ" tapped hole

For use with pipe railings a307* Aluminum 2½"308* Aluminum 3"

For use with Carlstadt® T-handrail moulding a418 Aluminum 3"419 Aluminum 3½"

*Also available in clear anodized AA-M32-C22-A31 (204R1)

a b 321* Aluminum 2¼" 1Ž" 403* Aluminum 3" 1Ž" 405* Aluminum 3½" 1Ž" 842 Bronze 2¼" 1Ž" 801 Bronze 2½" 1Ž" 803 Bronze 3" 1Ž" 1303 Nickel-Silver 3" 1Ž" 242 Stainless 2¼" 1Ý" 221 Stainless 2½" 1Ý" 223 Stainless 3" 1Ý"

SELF-ALIGNINGSatin Finish


BRONZE STAINLESS

VERTICAL MOUNTING BRACKETS




13 ⁄8"

15⁄8"

Vertical mounting bracket 151 is designed for mounting handrail onedge to provide a wall guard or bumper. T-handrail mouldings 6402,6405 or 6407 can be mounted without drilling and tapping. Bracket isalso suitable for mounting handrail on top of a parapet or wall.

Assembledbracket

T-Handrail

#10 FHMS

3⁄8" bolt

Masonry wall

Bracket 151

Expansion shieldwith 3⁄8" lag screw

Handrail 6407


Use 3⁄8" machine screw, stud or hex head bolt for fastening to wall.

Masonry wall

Bracket 151

Handrail 6402

151 Aluminum

#10 FHMS3⁄8" hole

11⁄2"

11 ⁄4"

VERTICAL MOUNTING BRACKET

a

b

c std. thread

c tapped hole

5⁄8"

3⁄8" tapped hole

WALL BRACKET EXTENSIONS Satin Finish

Note: Extending the reach of a handrail bracket reduces its load-bearingcapacity. To compensate for the reduced strength, the number of bracketsmay be increased and their spacing reduced.

a b c414* Aluminum 13⁄4" 11⁄8" 7⁄8"415* Aluminum 3" 11⁄8" 7⁄8"

For use with Carlstadt® wall brackets

464 Aluminum 13⁄4" 1" 3⁄4"465 Aluminum 3" 1" 3⁄4"864 Bronze 13⁄4" 1" 3⁄4"865 Bronze 3" 1" 3⁄4"247 Stainless 13⁄4" 1" 3⁄4"248 Stainless 3" 1" 3⁄4"

1364 Nickel-Silver 13⁄4" 1" 3⁄4"1365 Nickel-Silver 3" 1" 3⁄4"

* Clear anodized AA-M32-C22-A31 (204R1)Extensions may be cut to length to suit individual conditions but notshorter than 15⁄8".

Assembly Detail

BOLTS AND ANCHORS for handrail wall brackets

Threaded Stud● Steel 3⁄8" – 16 × 11⁄2"

Hanger Bolt● Steel 3⁄8" × 3"

Hex Head Lag Screw● Aluminum 3⁄8" × 2"● Brass 3⁄8" × 2"

(Available Plain or Finished)● Nickel-Silver 3⁄8" × 2" (Finished)● Stainless 3⁄8" × 2"

Post Bracket Hanger Bolt● Steel 5⁄16"× 11⁄2" / 1⁄2"–13× 3⁄8"

EXPANSION SHIELDS (Lead) For setting 3⁄8" lag screws and hanger bolts in concrete, brick orstone. Drill hole size of 3⁄8" diameter by21⁄2" deep.

HEAVY-DUTY DOUBLE MACHINE BOLT ANCHOR(Zinc Alloy) Non-calking machine boltanchor for use in masonry materials ofquestionable strength or where heavyshear loads are encountered. Threadaccommodates 3⁄8" – 16 stud or machinebolt (supplied by others). Drill hole size of3⁄4" diameter by 21⁄4" deep.

For use with 307, 308, 313 and 314 wall brackets




BRONZE STAINLESS

CARLSTADT® poST BRACKETS

a

1Þ"


Ž" ¾"a

1Þ"


Ž" ¾"

a


Ž"

1¼"

¼"


2ð"3"a


Ž"

1¼"

¼"


2ð"3"

For use with Carlstadt® handrail moulding a309 Aluminum 3¼"312 Aluminum 2þ"

a

1Ð"

¾"

Ctsk. for #10 FHMS


Stainless detail

b

b

2½"


Ž"

a

1Ð"

¾"

Ctsk. for #10 FHMS


Stainless detail

b

b

2½"


Ž"

1¼"

2ð"3"

¾"

Ctsk. for #10 FHMS

2¼"


Ž"

1¼"

2ð"3"

¾"

Ctsk. for #10 FHMS

2¼"


Ž"

322* Aluminum

a

1"


Ž"

1½"1¾"

a

1"


Ž"

1½"1¾"

1Ð"

¾"

Ctsk. for #10 FHMS

Ý" ra


Ž" b2½"


Stainless detail

b

1Ð"

¾"

Ctsk. for #10 FHMS

Ý" ra


Ž" b2½"


Stainless detail

b

a b 402* Aluminum 2¼" 1Ž" 402L* Aluminum 2½" 1Ž" 404* Aluminum 2¾" 1Ž" 802 Bronze 2¼" 1Ž"1302 Nickel-Silver 2¼" 1Ž" 222 Stainless 2¼" 1Ý"

SELF-ALIGNING

For use with Carlstadt® T-handrail moulding a439 Aluminum 2¼"440 Aluminum 2¾"

a b 441 Aluminum 2¼" 1Ž" 442 Aluminum 2¾" 1Ž" 841 Bronze 2¼" 1Ž" 1341 Nickel-Silver 2¼" 1Ž" 241 Stainless 2¼" 1Ý"


Carlstadt®PostBrackets are supplied with ½" stainless steel studs for attachment to metal posts. To mount Carlstadt®PostBrackets onto wood, use the Post Bracket Hanger Bolt shown on page 91.

For use with pipe railings

For use withCarlsrail® handrail moulding. a171 Aluminum 2¼"172 Aluminum 2¾"


Adjustable Bracket DetailPost and upper post cap must bedrilled and tapped to accept bracketarm. Recess of bracket arm has flatsides to accommodate wrench, whichpermits tightening without marringexposed surfaces. Handrail flange tiltsto adjust to stair angle and is attachedto handrail with machine screws.Pressure on tightening block preventslooseness and rattling.

CARLSTADT® CENTER POST BRACKETS



BRONZE STAINLESS

11 ⁄16"

5 ⁄8"

1"

Ctsk. for #10 FHMS

3⁄4" 3⁄4"

3⁄4"

21⁄2"

15⁄8"

MS

11 ⁄8"

7 ⁄8"

1"

3⁄4"

3⁄4"

3⁄4"

3⁄4"

#6 FHMS

Center post brackets permit handrail to be centered directly over post, yet allow it totilt to conform to stair incline. Bracket is secured to post with pin or screw.

Ctsk. for #10 FHMSCurved for pipe 3⁄4"

c

21⁄2"

11 ⁄16"

5 ⁄8"

11 ⁄4"

b

CENTER POST BRACKETS

161 Aluminum Curved for pipe, Fits posts 430 and 6430162 Aluminum Flat for moulding, Fits posts 430 and 6430

Pipe Size Schedule Clear Hole7161* Aluminum 11⁄4" all 1⁄2"7261* Aluminum 11⁄2" all 1⁄2"8661 Bronze 11⁄4" all 1⁄2"8861 Bronze 11⁄2" all 1⁄2"1361 Nickel-Silver 11⁄2" all 1⁄2"9161 Stainless 11⁄4" all 1⁄2"9361 Stainless 11⁄2" all 1⁄2"

* Also available clear anodized AA-M10-C22-A31 (204R1)

11⁄8"

Aluminum

Post cap

Adapter Anchor plug

1"


a462* Aluminum 13⁄4"463* Aluminum 3"862 Bronze 13⁄4"863 Bronze 3"245 Stainless 13⁄4"246 Stainless 3"

1362 Nickel-Silver 13⁄4"1366 Nickel-Silver 3"

Extensions may be cut to length to suit individual conditions. * Also available in clear anodized AA-M10-C22-A31 (204R1)

POST BRACKET ADAPTER Satin Finish

POST BRACKET EXTENSIONS

Bracket

Drive pinor screw


#10 FHMS


Post 11⁄2" Sch 40

Post Bracket Assembly DetailsAngle may be adjusted as required.

Designers should note that extending a bracket increases stress at its base andreduces its allowable load.

Flat Pipe Sched. c b144 Aluminum 11⁄4" 40 1.660" 15⁄8"145 Aluminum 11⁄2" 40 1.900" 15⁄8"

Curved Pipe Sched. c b142 Aluminum 11⁄4" 40 1.660" 15⁄8"143 Aluminum 11⁄2" 40 1.900" 15⁄8"

For center mounting of pipe or rounded handrailonto aluminum Connectorail® posts.

For center mounting of flat-bottomed handrail onto aluminum Connectorail® posts or stainless steel pipe posts.

Tightening block

Bracket arm

Handrail flange

a5⁄8"

1"

1⁄2" tapped hole

1⁄2" std. thread stainless stud

152 Aluminum Fits posts 430, 6430 and Carlstadt® T-handrail moulding


JuliusBlum&Co.Inc.


ALUMINUM STAINLESS

BRONZE

GLASS MOUNTING AND VERTICAL BRACKETS

Handrail may be mounted to the face of the tempered glassbalustrade using a combination of Carlstadt® wall brackets andour glass mounting adapter kit. The kit contains a disc with a 3⁄8"stud weld, a bushing, and two gaskets.TO ASSEMBLE: � Prior to tempering, for 1⁄2" glass drill a 5⁄8" clear hole; for 3⁄4"glass drill a 7⁄8" clear hole (Do not attempt to drill a hole in tempered glass—it will mostlikely break) � Insert the bushing in the hole� Insert the stud welded disc with gasket through the bushing;place the gasket on the other side� Thread on bracket and tighten.

3"

3⁄16"

3⁄8" StainlessStud

Gaskets

Bushing

Glassa

BushingGlass Size a Diameter

824 Bronze 1⁄2" 1⁄2" 5⁄8"840 Bronze 3⁄4" 3⁄4" 7⁄8"224* Stainless 1⁄2" 1⁄2" 5⁄8"240* Stainless 3⁄4" 3⁄4" 7⁄8"

* For use with aluminum and stainless brackets.

GLASS-MOUNTED HANDRAIL

GLASS-MOUNTED HANDRAIL ADAPTER KITFor 1⁄2" and 3⁄4" Glass, Satin Finish

3⁄8" Stainless Stud

Gaskets

Bushing

Glass


Post 6430

Bracket 441

Handrail 6905

Bracket 163Gasket and panel,1⁄4" typical

Threaded Bushing Brackets are used with threaded studs, machinescrews or bolts to install handrails or panels. Brackets may be cut tolength as required. Brackets are furnished with aluminum Phillips TrussHead machine screws and washers.

3⁄8" tapped hole


5⁄8" 7⁄8"2"

11⁄4"


3"

3⁄8" tapped hole

21⁄2"

13⁄4"



THREADED BUSHING BRACKETS


TWO PIECE MOUNTING BRACKETS



BRONZE STAINLESS

4"

3"11⁄2"1⁄4"



3"

1"11⁄2"

2"



3 ⁄4"

7⁄8"

TWO-PIECE MOUNTING BRACKETS Satin FinishFor wide wood handrail



11⁄2"1⁄4" hexsocket headset screw

3⁄8" hole

15⁄16"Ctsk. for 1⁄4" FHMS orflat head wood screw

7⁄16"

11 ⁄4"

15⁄16

"

11⁄2"

11 ⁄4"

3 ⁄4"


3⁄8" hole 7⁄16"


3 ⁄4"

7⁄8"

3 ⁄4"

7⁄8"

Versatile two-piece mounting brackets with concealed fasteners are suitable formounting wall handrails and elevator car rails. 167 is tapered for mounting on a postof 1" or greater width.

For elevator car handrails


166* Aluminum296 Stainless196 Nickel-Silver896 Bronze

167 Aluminum For mounting to Acrylic/Wood posts

2"

7⁄8"

11 ⁄4"



3⁄8" Mounting bolt(by others)

Wall plate

Outer sleeve

1⁄4" set screw

3"


11 ⁄4"

r 1 ⁄4"




Pipe ortubing

Tubularrivet

ADAPTER

r Use With7164* Aluminum .830" 1.660" OD7264* Aluminum .950" 1.900" OD8864 Bronze .950" 1.900" OD8964 Bronze .750" 1.500" OD5264 Nickel-Silver .750" 1.500" OD5364 Nickel-Silver .950" 1.900" OD9164 Stainless .830" 1.660" OD9364 Stainless .950" 1.900" OD

* Also available in clear anodized AA-M32-C22-A31 (204R1)* Also available in clear anodized AA-M32-C22-A31 (204R1)


JuliusBlum&Co.Inc.


THRESHOLDS AND MOULDINGS

ELEVATOR CAB COMPONENTS AND MISCELLANEOUS MOULDINGS

This section contains details on the Julius Blum & Co. componentswhich are of particular use in the assembly of elevator cabs. Includedare Elevator Door Saddles and Flat Fluted Sections in aluminum,bronze, nickel-silver, stainless steel and handrail mouldings and brack-ets which are suitable for vertical mounting.

Aluminum components are of alloy 6063—extrusions are T52temper while machined brackets are T6 temper. When properly fabri-cated, they are suitable for anodizing, including most of the hard coatanodic processes. Black anodizing may result in inconsistent matches—consult your anodizer before specifying.

Bronze components are of extruded architectural bronze alloy, C38500.

Nickel-Silver saddles, fluted sections and handrail are extrudedfrom copper-nickel-zinc alloy, C79800.

Stainless Steel components are made of Type 302/304 (18-8) stainless steel.

All brackets are satin finished.Acrylic/Wood handrail mouldings—in oak, walnut and ash—are

impregnated with acrylic plastic according to the Permagrain RadiationProcess. This provides a hard surface and permanent finish which hastwice the resistance to indentation and several times the resistance toabrasion as the same hardwood finished conventionally. It is laminatedfrom several strips so as to obtain greater strength and continuous uni-form lengths. For more information, see pages 62-63.

Refer to pages 104 to 122 for our full range of tubing, bars andshapes in aluminum, bronze, nickel-silver, steel and stainless steel.

HANDRAILS AND BRACKETSJulius Blum & Co., Inc. stocks a large variety of handrail mouldingsand brackets for horizontal and vertical mounting in elevator cabs.Matching elbows and end caps are available for most sections.Handrail sections are supplied with a smooth mill finish suitable forarchitectural finishes.

SADDLESElevator and Door Saddles are available in aluminum, bronze,nickel-silver, stainless steel and steel. Flat fluted sections may becombined with single or double speed saddles to extend width.Saddle alloy matches handrail alloy.

MOULDINGSA variety of other architectural mouldings are available. Thesemouldings provide for alternative methods of glass framing or dooredging. Stair nosings in bronze and aluminum are also availablefrom stock. Mouldings are frequently combined in restoration work.

TUBING, BARS AND SHAPESA large selection of tubing, bars, and shapes in aluminum, bronze,steel, nickel-silver and stainless steel are available from stock.Shapes are extruded to high tolerances and have the sharp cor-ners required for architectural work. Angles and tees are used fre-quently in dropped ceilings as well as other areas of elevator cabs.


2¾" 1½" 1¼"

¼"

Ý"

2¾" 1¼"

Ý"

¼"

2ž"

š"

¼"

1Þ"

1½" 1Þ"2ž"

š"

¼"

ELEVATOR CAB COMPONENTS



BRONZE STAINLESS

FLATFLUTEDSECTIONS20' lengths, except as notedFor assembled saddles

a lb/ft6980 Aluminum 1" .2346970 Aluminum 1½" .3616971 Aluminum 2" .4826973 Aluminum 3" .7236975 Aluminum 4" .9644566 Bronze 1" .7204558 Bronze 1½" 1.1504557 Bronze 2" 1.4804556 Bronze 2½" 1.8404555 Bronze 3" 2.2304554 Bronze 3½" 2.5504553 Bronze 4" 2.8904553Q Bronze 4¼" 3.2604552 Bronze 4½" 3.2904551 Bronze 5" 3.6704550* Bronze 5½" 4.0504559* Bronze 6Þ" 4.5505558*** Nickel-Silver 1½" 1.1505553*** Nickel-Silver 4" 3.0406573** Stainless 2þ" 1.7806575** Stainless 4" 3.050 * 16' lengths, ** 8' lengths, *** 10' lengths

Aluminum components are of alloy 6063-T52. When properly fabricated, they are suitable for anodizing—including most of the hard-coat anodic processes. Black anodizing may result in inconsis-tent matches. Consult your anodizer before specifying.

Bronze components are of extruded architectural bronze alloy, C38500.

Nickel-Silver handrails, saddles, and sections are extruded from nickel-silver alloy, C79800.

Stainless Steel components are made of Type 302/304 (18-8) stainless steel.

ELEVATORDOORSADDLES

a b lb/ft Lengths6964 Aluminum 2¼" š" 1.25 20'6979 Aluminum 2ž" š" 1.44 20'4564 Bronze 2¼" š" 4.25 6', 8', 10', 16'4579 Bronze 2ž" š" 5.09 6', 8', 10', 16'5564 Nickel-Silver 2¼" ¾" 4.63 6', 8', 10'5579 Nickel-Silver 2ž" š" 6.35 6', 8', 10'

a b lb/ft Lengths6989 Aluminum 2¾" Ý" 1.54 20'4589 Bronze 2¾" Ý" 4.79 8',10'5589 Nickel-Silver 2¾" Ý" 5.05 8',10'

a b lb/ft Lengths6999 Aluminum 2¾" Ý" 2.10 20'4599 Bronze 2¾" Ý" 6.55 8',10'5599 Nickel-Silver 2¾" Ý" 7.00 8',10'

a b lb/ft Lengths6963 Aluminum 2¼" š" .85 20'6969 Aluminum 2ž" š" 1.08 20'4563 Bronze 2¼" š" 2.96 6', 8', 16'4569 Bronze 2ž" š" 3.76 6', 8', 10'5563 Nickel-Silver 2¼" ¾" 3.58 6', 8', 10'5569 Nickel-Silver 2ž" š" 4.16 6', 8', 10'

lb/ft Lengths6967 Aluminum .314 20'4567 Bronze 1.040 20'5567 Nickel-Silver .950 20'

6579 Stainless 5.530-* lb/ft 8' lengths

ExTENSioN

6569 Stainless 3.71 lb/ft 8' lengths



a¼"

a

b

11⁄8"

¼"

a

b

11⁄8"1½"

¼"

a

b

1¼"

¼"

a

b¼"

1¼"1½"

½"

¼"

JuliusBlum&Co.Inc.


ALUMINUM STEEL

BRONZE

THRESHOLDS AND SADDLES

1 ⁄2"

1⁄8"

13⁄4"

1 ⁄2"

1⁄8"

4"



7 ⁄8"

41⁄4"

9 ⁄16"

41⁄4"

5 ⁄8"

31⁄2"

9 ⁄32"11⁄8"

1"

11⁄2" 1"

1"

3⁄4"

Bathroom door saddle

Floor

Tile floor

Bathroom door saddle

Floor

Tile floor

Typical Details

a

b

lb/ft a b Lengths6910 Aluminum .365 2 1⁄2" 1⁄4" 20'6914 Aluminum .476 3" 1⁄4" 16'-3"

a

b

9 ⁄32"11⁄4"

lb/ft a b Lengths6924 Aluminum .72 3" 1⁄2" 16'-3"6923 Aluminum 1.05 4" 1⁄2" 20'6926 Aluminum .83 4" 1⁄2" 16'-3"6922 Aluminum 1.27 5" 1⁄2" 20'6920 Aluminum 1.53 6" 5⁄8" 20'6921 Aluminum 1.23 6" 1⁄2" 16'-3"6925 Aluminum 1.76 7" 1⁄2" 20'4524 Bronze 2.11 3" 3⁄8" 20'4523 Bronze 3.05 4" 1⁄2" 20'4522 Bronze 3.79 5" 1⁄2" 20'4520 Bronze 4.64 6" 5⁄8" 20'4519 Bronze 5.14 7" 1⁄2" 12'

DOOR SADDLES20' lengths, except as noted

WEATHER STRIP DOOR SADDLES20' lengths, except as noted

BATHROOM DOOR SADDLES20' lengths

BUTT SADDLE21'-1" lengths

CARPET SADDLE21'-1" lengths

SMOOTH

FLUTED

6991 Aluminum 16'-3" lengths .689 lb/ft

4596 Bronze 2.21 lb/ft


4598 Bronze .62 lb/ft

6998 Aluminum 16'-3" lengths .18 lb/ft


4487 Steel .93 lb/ft


DOOR ELEVATOR SADDLES AND HANDRAIL MOULDINGS


1 ⁄2"

7⁄8"

3 ⁄8"

3⁄4"

1 ⁄4"5"

1 ⁄2"

Cutouts for floor hinges can be made easily before assembly.Wider saddles can be constructed by adding a flat fluted section in

the center. The pattern of all fluted sections is identical, and joints withsaddle sections will not be apparent.

Saddles of extreme width can be constructed by using bevel endsections and two or more flat fluted sections with a plate underneath.

5 ⁄8"

1"

7 ⁄8" 3 ⁄8

"3 ⁄8

"

53⁄4"

13 ⁄16"

2"

1 ⁄4"

7 ⁄8"

1 ⁄4" 7⁄8" 1⁄4"

11 ⁄4"

1 ⁄4" 21⁄4"

15⁄8"

51 ⁄2"

8591 Oak Acrylic/Wood

15⁄8"

51 ⁄2"

8521 Oak Acrylic/Wood 8522 Walnut Acrylic/Wood 8523 Ash Acrylic/Wood

15⁄8"

71 ⁄2"


DOOR SADDLE SECTION21'-4" lengths

ROOF DOOR SADDLE20' lengths

ACRYLIC / WOOD HANDRAIL MOULDINGS20' lengths

BEVEL END SECTIONS20' lengths

Typical Door Saddle Details

6913 Aluminum 1.48 lb/ft6997 Aluminum 1.45 lb/ft


4526 Bronze 1.35 lb/ft 4528 Bronze 1.09 lb/ft

6927 Aluminum .45 lb/ft4527 Bronze 1.48 lb/ft

NOSINGS20' lengths

4560 Bronze 2.45 lb/ft 4565 Bronze 1.31 lb/ft


Walnut

Ash

Oak

ALUMINUM ACRYLIC / WOOD

BRONZE




BRONZE STAINLESS

HANDRAIL MOULDINGS

Pipe size OD Sch. t lb/ft1¼" 1.66" 10 .109" .6251¼" 1.66" 40 .140" .7851½" 1.90" 10 .109" .7211½" 1.90" 40 .145" .940Fittings: end cap,elbow

ALUMINUM6063-T52, 20' lengths, Mill Finish

ALUMINUM6063-T52, 20' lengths

2"

2"

½"

½" 3"

¾"

a

¾"

3"

¾"

2½"

2½"

¾"

¾"

6435 1.075 lb/ftFittings: end cap* 6063-T6

6437 1.057 lb/ftFittings: end cap


6986 2.684 lb/ft

6988 1.138 lb/ft

6939 2.214 lb/ft

6935 .977 lb/ftFittings: end cap






2¾"

2¾"

1¼"

.125"

1¼"

.125".125"

.125"

a

b

.125"

2¾"

2¾"

1¼"

.125"

2¾"

1¼"

1¼"

3"

1¼"

1¼"

x

y.125"

3"

.125"

3"

1¼"

.125"

2"

2"

117⁄32"

117⁄32"

1¾"

1¾"

1Ð"

1Ð"

1Ł"

1Ł"

2Þ"

2Þ"

1Ł"

1Ł" 1Š"

1Š"

a

a117⁄32"

2¾"

2¾"

117⁄32"

117⁄32"

117⁄32"

2þ"

1¼"

2þ"

1¼"

2ð"

1ð".125"

2ð"

1ð"

.125"

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD

BRONZEC38500, Mill Finish 20' lengths

NICKEL-SILVERC79800, 20' lengths

Satin FinishPipe size OD t lb/ft¾" 1.06 .113" 1.201" 1.32 .120" 1.461¼" 1.66 .062" 1.111¼" 1.66 .148" 2.151½" 1.90 .062" 1.271½" 1.90 .148" 2.55Fittings: end cap,elbow

STAINLESSType 302/304 (18-8), 20' lengthsMill Finish

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD



4503 2.75lb/ftFittings: C-N


6488* 1.56 lb/ftFittings: end cap*16 lengths

OD lb/ft6489 1½" 1.75 1.90" 2.07Fittings: end cap,elbow




OD t lb/ft5289 1½" .100" 1.75 1.90" .109" 2.25Fittings: end cap



6503* 2.54 lb/ft*16 lengths


2Þ"

2Þ"

1Ł"

1Ł"

1Š"

1Š"

2¾"

2¾"

117⁄32"

117⁄32"

19⁄32"

19⁄32"

2"

.100

"

x

y

2"

.100

"

2"

.100"

½"

½"

½"

2¾"

2¾"

117⁄32"

117⁄32"

19⁄32"

19⁄32"

2"

2"

19⁄32"

19⁄32"

117⁄32"

117⁄32"

2"

.100

"

x

y

2"

.100

"

2"

.100"

½"

½"

½"

2"

.062"½"

½"

½"

2" .062"

2"

.062

"

x

y

2¼"

2¼"

.062"ł"

ł"

.062"

1¼"

1¼"

Š"

Š"

23⁄32"

23⁄32"

a

.062"

ł"

ł"

2¾" .062"

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD

1½"

Ž"

Ž"

Ý"

Ý" 1½"

2Þ"

2Þ"

1Ł"

1Ł"

1Š"

1Š"

MOUNTING BRACKETS



BRONZE STAINLESS

3⁄8" hole

T-handrail moulding, select from page 34.

11 ⁄4"

#10 FHMS

13 ⁄8"1 3⁄8"

11⁄2"

151 Aluminum

11 ⁄4"

r 1 ⁄4"




Pipe ortubing

Tubularrivet



THREADED BUSHING BRACKETSSatin Finish

VERTICAL MOUNTING BRACKET Satin Finish

ADAPTERSSatin Finish



166* Aluminum896 Bronze196 Nickel-Silver296 Stainless

For wide wood handrails

3⁄8" tapped hole


5⁄8" 7⁄8"2"

11⁄4"

3"

3⁄8" tapped hole

21⁄2"

13⁄4"

3"

r Use With7164* Aluminum .830" 1.660" OD7264* Aluminum .950" 1.900" OD8864 Bronze .950" 1.900" OD8964 Bronze .750" 1.500" OD5264 Nickel-Silver .750" 1.500" OD5364 Nickel-Silver .950" 1.900" OD9364 Stainless .950" 1.900" OD


2"11 ⁄4

"


Ctsk. for1⁄4" FHMSor flat headwood screw 3"

11⁄2"

3 ⁄4"

11 ⁄4"

3 ⁄4"


3⁄8" hole7⁄8"

7⁄16"


4"

3"11⁄2"1⁄4"



3"

1"11⁄2"

2"



3 ⁄4"

7⁄8"

3⁄8" Mounting bolt

Outer sleeve1⁄4" set screw

Inner sleeve





JuliusBlum&Co.Inc.


ALUMINUM STEEL

BRONZE PLASTIC

GLASS FRAMING SECTIONS

1 ⁄8"

1 ⁄2"

11⁄8"

5 ⁄8"

3 ⁄8"

11⁄8"

2"

1⁄2"

21 ⁄8"

13⁄16"

3 ⁄4"

3⁄4"

1 ⁄8"

1 ⁄2"

11⁄8"

3 ⁄4"

7⁄16"

15⁄16

"

1⁄2"

1⁄2"1⁄4"

5 ⁄8"

FLEXIBLE PVC CHANNEL50' coils

COVE MOULDINGS AND GLASS STOPS20' lengths

8708 Flexible PVC

111⁄32"

3 ⁄4"

1⁄8"

GLASS STOP

GLASS FRAMING SECTIONS20' lengths

Framing Detail

6958 Aluminum .338 lb/ft 6959 Aluminum .394 lb/ft




4302 Steel 1.15 lb/ft

8106 Aluminum Mill finish .276 lb/ft8206 Aluminum Clear anodized, AA-M10-C22-A31 (204R1) .276 lb/ft4506* Bronze .950 lb/ft

* 16' lengths

lb/ft6952 Aluminum .1666102 Bronze .500

lb/ft6955 Aluminum .2606105 Bronze .670

6953* Aluminum .183 lb/ft* 16' lengths

1 ⁄2"

1⁄2"

Glass stop

PanelAdapter

Tubularrivet

Snap-in

Flexible PVCchannel

Pipe Post

Sections 6958 and 6959 with flat bars

1⁄2"

1 ⁄2"

Aluminum and bronze glassstop/snap-in and flexible PVCglazing channel serve to mountpanels of 1⁄4" glass, plastic, wiremesh or other material.

GLAZING MEMBERS20' lengths, except as noted

Full Scale

23⁄32"SNAP-IN

3 ⁄8"

3⁄4"

3 ⁄8"

11⁄8"

VARIOUS MOULDINGS20' lengths

6473 Bronze .76 lb/ft 6474 Bronze 1.01 lb/ft8107 Aluminum Mill finish .138 lb/ft8207 Aluminum Clear anodized, AA-M10-C22-A31 (204R1) .138 lb/ft4507* Bronze .510 lb/ft

* 16' lengths



2"

23⁄4"

A A'

DOOR EDGINGS, ADAPTER BARS AND WINDOW SILLS


ALUMINUM

BRONZE

1 ⁄2"

1 ⁄2"

15 ⁄8"

125⁄32

"

125⁄32

"15 ⁄8

" 15 ⁄8"

2"

5⁄8"

3 ⁄4"

9 ⁄16"

1 ⁄8"

ca

1⁄4"

b

1⁄4"

t

Typical Details

DOOR EDGINGS16' lengths, except as noted. Full Scale.

ALCOA lb/ft a b t c54684 Aluminum .767 31⁄2" 21⁄4" 1⁄8" 3⁄16"54685 Aluminum .842 4" 31⁄4" 1⁄8" 3⁄16"54686 Aluminum .919 41⁄2" 33⁄4" 1⁄8" 3⁄16"54687 Aluminum .994 5" 41⁄4" 1⁄8" 3⁄16"54688 Aluminum 1.067 51⁄2" 43⁄4" 1⁄8" 3⁄16"54689 Aluminum 1.141 6" 51⁄4" 1⁄8" 3⁄16"54690 Aluminum 1.529 69⁄16" 53⁄4" 5⁄32" 3⁄16"54693 Aluminum 2.414 91⁄8" 81⁄4" 3⁄16" 1⁄4"

6645* Bronze .79 lb/ft 6646* Bronze .67 lb/ft* 20' lengths

ALCOA SA-100 Aluminum

Detail at A–A' with 6643, 6645 and 6646

6642 Bronze.56 lb/ft


6138 Bronze1.35 lb/ft

6648* Bronze1.10 lb/ft


6947 Aluminum.384 lb/ft

Elevation

Section A–A'

ANCHOR CLIP FOR TYPE AA WINDOW SILLS

1⁄2"

1"

1⁄4"

11⁄4"

PANEL CLIPSAluminum, 5' lengths

1"

r = .950"

1⁄4"

1"

r = .950"

13⁄8"

ADAPTER16' lengths

for use with1.90 OD pipe

Tubularrivet

Panel clipPipe post

1⁄2"


Pipe7460-5 Aluminum 11⁄4"7560-5 Aluminum 11⁄2"


WINDOW SILLS, TYPE AA21' lengths, Aluminum, 6063-T52SA-100 anchor clip spacing to be not more than 3'-0"

See page 19 for 1" clips.


TUBING, BARS, AND SHAPESJuliusBlum&Co.Inc.


STOCK SIZES AND ELEMENTS OF SECTIONS

Our extensive stock of tubing, bars and shapes in aluminum, bronze,nickel-silver, steel and stainless steel has been selected especially tomeet the requirements of ornamental and miscellaneous metal work. Allitems are carried in stock in substantial quantities and shipment is usu-ally made promptly upon receipt of order. All tubing, bars and shapesare supplied in stock lengths with a mill finish, except as noted. JuliusBlum & Co., Inc. does not provide cutting or metal finishing services.

Aluminum architectural shapes, bars and tubes are extruded fromalloy 6063-T52, except as noted. These items have a smooth, uniformsurface and, when properly fabricated, are suitable for anodizing—including most of the hard coat anodic processes. Black anodizing mayresult in inconsistent matches. Consult your anodizer before specifying.Aluminum extrusions are packed in bundles of approximately 100 lbs.which are wrapped and paper interleaved at the mill. Ordering in full bun-dles ensures surface quality and speeds shipping from our warehouse.Aluminum Structural shapes are extruded from alloy 6061-T6.

Bronze tubing, bars and shapes are of extruded alloy C38500,architectural bronze. Round pipe is drawn alloy C23000, red brass.When polished, red brass will provide a generally acceptable matchto architectural bronze.

Nickel-Silver shapes are extruded from C79800. Nickel-silver isa copper/nickel alloy and contains no silver. When polished, nickel-silver has the appearance of stainless steel with golden highlights.

Stainless Steel shapes are type 304 (18-8), except as noted.True bars have sharp corners and are not sheared from plate. Stainlesssteel tubing is of ornamental grade with a smooth surface which is sim-ple to polish.

Steelangles and channels are carbon steel C1010, except as noted.Cold rolled channel and angle have a square root and square edge.

All extrusions are produced and handled with great care to assure aproduct well suited for architectural finishing. Items are thoroughly protected for shipment by wrapping and/or crating, with the exceptionof aluminum structural and steel shapes, which are normally shipped instrapped bundles. Elements of sections are shown alongside each itemin this section. This data has been ascertained with care but cannot be guaranteed. For additional engineering information, see pages 123to 130.


TUBING, BARS, AND SHAPES


TEESSharp Corners20' lengths

t

b

a Cx

y

x

Cx

x

t

b

a

y

b

t

a

yC

C

x

BRONZE Alloy C38500, except as noted

Unequal Legs a b t lb/ft Area Ix Sx Cx Iy Sy Cy3⁄4 3⁄8 1⁄8 .45 .125 .007 .015 .453 .001 .004 .2661 1⁄2 1⁄8 .65 .172 .017 .027 .619 .003 .008 .3691 3⁄4 1⁄8 .75 .203 .020 .029 .668 .009 .017 .54311⁄4 3⁄4 1⁄8 .88 .234 .037 .045 .812 .010 .018 .56211⁄2 3⁄4 1⁄8 .97 .266 .061 .064 .952 .010 .018 .57711⁄2 1 1⁄8 1.10 .300 .068 .068 1.003 .024 .032 .7532 1 1⁄8 1.33 .359 .150 .117 1.285 .026 .033 .7853* 2 1⁄4 4.32 1.187 1.087 .542 2.007 .392 .260 1.5074* 21⁄2 1⁄4 5.70 1.562 2.602 .973 2.675 .805 .418 1.925Equal Legs 1⁄2 1⁄2 1⁄8 .42 .109 .002 .006 .3305⁄8 5⁄8 1⁄8 .52 .141 .005 .011 .4243⁄4 3⁄4 1⁄8 .64 .172 .009 .017 .5171 1 1⁄8 .89 .234 .022 .031 .7041 1 3⁄16 1.24 .341 .030 .044 .68211⁄4 11⁄4 1⁄8 1.09 .297 .044 .049 .89111⁄4 11⁄4 3⁄16 1.60 .435 .062 .071 .86911⁄4 11⁄4 1⁄4 2.05 .562 .077 .091 .84711⁄2 11⁄2 1⁄8 1.35 .359 .078 .072 1.07911⁄2 11⁄2 3⁄16 1.92 .529 .110 .104 1.05611⁄2 11⁄2 1⁄4 2.52 .688 .139 .134 1.0342 2 1⁄8 1.79 .484 .190 .131 1.4542 2 3⁄16 2.61 .717 .273 .191 1.4312 2 1⁄4 3.37 .938 .348 .247 1.40821⁄2 21⁄2 1⁄8 2.24 .609 .378 .206 1.82921⁄2 21⁄2 1⁄4 4.33 1.187 .703 .394 1.7833* 3 1⁄4 5.25 1.437 1.244 .577 2.160

* 16' lengthsEqual Sidesb a t lb/ft Area Ix Sx Cx Iy Sy1⁄2 1⁄2 3⁄32 .44 .126 .003 .009 .348 .004 .0173⁄4 3⁄4 1⁄8 .90 .250 .014 .030 .453 .020 .0531 1 1⁄8 1.25 .344 .034 .055 .619 .053 .10511⁄4 11⁄4 1⁄8 1.60 .438 .069 .088 .853 .110 .17611⁄2 11⁄2 1⁄8 1.94 .531 .123 .129 .952 .198 .264Unequal Sides5⁄8 5⁄16 3⁄32 .36 .099 .001 .004 .201 .005 .0153⁄4 3⁄8 1⁄8 .57 .159 .002 .009 .238 .011 .0281 1⁄2 1⁄8 .85 .219 .005 .014 .330 .028 .0571 3⁄4 1⁄8 1.04 .281 .015 .031 .479 .040 .08111⁄4 1⁄2 1⁄8 .91 .250 .005 .015 .344 .050 .08011⁄4 5⁄8 1⁄8 1.06 .281 .010 .023 .424 .060 .09611⁄2 1⁄2 1⁄8 1.02 .281 .005 .015 .354 .080 .10611⁄2 5⁄8 1⁄8 1.12 .312 .010 .023 .437 .094 .12611⁄2 1 1⁄8 1.47 .406 .039 .059 .668 .139 .1852 3⁄4 1⁄8 1.47 .406 .025 .039 .543 .221 .22121⁄4 7⁄8 1⁄8 1.75 .469 .031 .048 .637 .331 .29421⁄2 1 1⁄8 1.94 .531 .046 .064 .732 .471 .377

b a t lb/ft Area Ix Sx Cx Iy Sy3⁄4 3⁄4 1⁄8 .64 .171 .009 .017 .518 .004 .0121 1 1⁄8 .89 .233 .022 .031 .705 .011 .02111⁄2 11⁄2 1⁄8 1.35 .358 .077 .072 1.080 .035 .04711⁄2 11⁄2 3⁄16 1.94 .529 .110 .104 1.056 .054 .0712 2 3⁄16 2.61 .717 .271 .190 1.430 .126 .126

ANGLESSharp Corners20' lengths, except as noted

CHANNELSSharp Corners20' lengths

BRONZE

All dimensions in inches and weight in pounds per lineal foot

105


106



All dimensions in inches and weight in pounds per lineal foot.

BRONZE

ROUNDBARS16' lengths, except as noted

a b lb/ft Area I S¼ ¼ .23 .063 .000 .003þ þ .52 .141 .002 .009½ ½ .92 .250 .005 .021Ž Ž 1.44 .391 .013 .041¾ ¾ 2.08 .563 .026 .0701 1 3.69 1.000 .083 .1671¼ 1¼ 5.76 1.563 .204 .3261½ 1½ 8.28 2.250 .422 .5632 2 14.762½** 2½ 23.06

** 10' lengths

a lb/ft Area I Sþ .41 .110 .001 .005½ .72 .196 .003 .012Ž 1.13 .307 .008 .024¾ 1.63 .442 .016 .041ž* 2.22 .601 .029 .0661 2.89 .785 .049 .0981Þ 3.66 .994 .079 .1401¼ 4.52 1.227 .120 .1921½ 6.51 1.767 .249 .3311¾ 8.862* 11.57 3.142 .785 .7852½** 18.00 4.906 1.917 1.5303** 26.10 7.069 3.974 2.6493½** 35.00

* 12' lengths ** 10' lengths *** random lengths

SQUAREBARSSharp Corners16' lengths, except as noted

a b lb/ft Area Ix Sx Iy SyÞ ½ .23 .063 .000 .001 .001 .005Þ Ž .29 .078 .000 .002 .003 .008Þ ¾ .35 .094 .000 .002 .004 .012Þ 1 .46 .125 .000 .003 .010 .020Þ 1¼ .58 .156 .000 .003 .020 .032Þ 1½ .69 .188 .000 .004 .035 .047Þ 2 .92 .250 .000 .005 .083 .083Þ 3 1.38 .375 .000 .008 .281 .187ð ½ .35 .094 .000 .002 .002 .008ð Ž .43 .118 .000 .004 .004 .012ð ¾ .52 .141 .000 .004 .007 .018ð 1 .69 .188 .001 .006 .016 .032ð 1½ 1.04 .282 .001 .009 .053 .071ð 2 1.38 .376 .001 .012 .125 .125ð 2½ 1.73 .470 .001 .015 .244 .195ð 3 2.08 .564 .002 .018 .422 .281ð 3½ 2.42 .658 .002 .021 .670 .383ð 4 2.76 .752 .002 .023 1.000 .500¼ þ .34 .094 .000 .004 .001 .006¼ ½ .46 .125 .001 .005 .003 .010¼ Ž .58 .156 .001 .007 .005 .016¼ ¾ .69 .188 .001 .008 .009 .023¼ 1 .92 .250 .001 .008 .021 .042¼ 1¼ 1.15 .313 .002 .016 .041 .066¼ 1½ 1.38 .375 .002 .016 .070 .093¼ 2 1.84 .500 .003 .024 .167 .167¼ 2½ 2.30 .625 .003 .024 .326 .261¼ 3 2.77 .750 .004 .032 .563 .375¼ 4 3.65 1.000 .005 .040 1.333 .667Ł† 6 6.67 1.875 .015 .096 5.625 1.875þ ½ .68 .188 .002 .012 .004 .016þ Ž .87 .234 .003 .015 .008 .024þ ¾ 1.04 .281 .003 .018 .013 .035þ 1 1.38 .375 .004 .021 .031 .062þ 1¼ 1.73 .469 .005 .027 .061 .098þ 1½ 2.07 .563 .007 .037 .106 .141þ 2 2.76 .750 .009 .048 .250 .250þ 2½ 3.42 .938 .011 .059 .488 .390þ 3 4.11 1.125 .013 .069 .844 .563þ 4 5.53 1.500 .018 .096 2.000 1.000½ ¾ 1.37 .375 .008 .031 .018 .047½ 1 1.84 .500 .010 .040 .042 .084½ 1¼ 2.28 .625 .013 .052 .081 .130½ 1½ 2.76 .750 .016 .064 .141 .188½ 2 3.68 1.000 .021 .084 .333 .333½ 2½ 4.60 1.250 .026 .104 .651 .520½ 3 5.48 1.500 .031 .124 1.125 .750½ 4 7.36 2.000 .042 .168 2.667 1.333¾ 1 2.74 .750 .035 .094 .063 .125¾ 1½ 4.11 1.125 .053 .141 .210 .281¾ 2 5.53 1.500 .070 .188 .500 .500

† 8' lengths

flAtBARSSharp Corners16' lengths, except as noted

BRONZEAlloy C38500, except as noted

b

a

b

a

y

x

b

a

b

a

y

x

b

a

b

a

y

x

b

a

b

a

y

x

a a

a a

b

a

b

a

b

a

b

a

107




BRONZE

Nominal Pipe Size Sched. OD ID t lb/ft Area I S r1¼ 40 1.660 1.368 .146 2.63 .695 .201 .242 .5381½ 40 1.900 1.600 .150 3.13 .825 .318 .335 .621

This pipe is furnished with plain ends, unmarked, and with a smooth finish suitable for polishing. See pages 14-30 for stock pipe fittings.

HANDRAIlPIPERed Brass Alloy C23000 Standard Pipe Sizes 20' lengths

Round20' lengths, except as noted

Major Axis Minor Axis lb/ft Area Ix Sx Iy Sy6488 Bronze 1.56 .426 .011 .044 .152 .152

SquareSharp Corners16' lengths

Oval16' lengths

a b t lb/ft Area I S½ ½ .093 .56 .151 .004 .018Ž Ž .093 .73 .198 .010 .031¾ ¾ .093 .90 .244 .018 .0481 1 .100 1.32 .360 .049 .0981¼ 1¼ .100 1.70 .460 .102 .1631½ 1½ .100 2.07 .560 .184 .2451¾ 1¾ .100 2.43 .660 .300 .3442 2 .125 3.46 .937 .552 .5522½ 2½ .100 3.48 .960 .923 .7403* 3 .125 5.27 1.437 1.984 1.323

* Rounded inside corners, r = ¼"

Minor Axis Major Axisa b t lb/ft Area Ix Sx Iy Sy½ 1 .100 .95 .260 .009 .034 .029 .058¾ 1½ .100 1.50 .410 .035 .093 .110 .1471 1½ .100 1.70 .460 .070 .139 .135 .180½ 2 .100 1.70 .460 .017 .068 .252 .2521 2 .100 2.07 .560 .090 .180 .278 .2781¼ 2½ .125 3.23 .875 .219 .351 .678 .5431 3 .125 3.46 .937 .153 .307 .950 .6331¼ 3 .125 3.69 1.000 .259 .415 1.071 .7201½ 3 .125 3.88 1.022 .384 .512 1.167 .7781¾ 3 .125 4.15 1.125 .566 .647 1.338 .8922 3 .125 4.48 1.187 .772 .772 1.467 .9781¾ 4 .125 5.28 1.375 .732 .836 2.742 1.371

OD t lb/ft Area I S1½ .100 1.75 .440 .108 .1441.900 .100 2.07 .565 .230 .2422½ .125 3.44 .933 .659 .5273 .125 4.50 1.129 1.169 .7793½** .125 4.85 1.325 1.890 1.080

Item No. 6489 ** 12' length

RectangularSharp Corners16' lengths

tUBING

BRONZEAlloy C38500, except as noted

b

at

b

at

b

at

b

at

b

at

b

at

b

at

b

atx

y

b

at

b

atx

y

b

at

b

atx

y

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD

2"

.100

"

x

y

2"

.100

"

2"

.100"

½"

½"

½"

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD




ALUMINUM

Equal Legs Bars per

a b t lb/ft Bundle† Area I S C1⁄2 1⁄2 1⁄16 .070 78 .058 .001 .004 .3521⁄2 1⁄2 1⁄8 .131 40 .109 .002 .006 .3305⁄8 5⁄8 1⁄8 .168 39 .141 .005 .011 .4243⁄4 3⁄4 1⁄16 .108 47 .089 .005 .009 .5403⁄4 3⁄4 1⁄8 .206 30 .172 .009 .017 .5171 1 1⁄16 .145 40 .120 .012 .016 .7271 1 1⁄8 .281 20 .234 .022 .031 .7041 1 3⁄16 .408 15 .341 .030 .044 .68211⁄4 11⁄4 1⁄8 .356 15 .297 .044 .049 .89111⁄4 11⁄4 3⁄16 .519 11 .435 .062 .071 .86911⁄2 11⁄2 1⁄8 .431 14 .359 .078 .072 1.07911⁄2 11⁄2 3⁄16 .633 10 .529 .110 .104 1.05611⁄2 11⁄2 1⁄4 .824 7 .688 .139 .134 1.03413⁄4 13⁄4 1⁄8 .506 12 .422 .126 .099 1.2662 2 1⁄8 .581 11 .484 .190 .131 1.4542 2 3⁄16 .857 6 .717 .273 .191 1.4312 2 1⁄4 1.124 5 .938 .348 .247 1.40821⁄2 21⁄2 1⁄8 .731 8 .609 .378 .206 1.8293 3 1⁄8 .881 6 .734 .661 .300 2.2033 3 3⁄16 1.308 5 1.093 .964 .442 2.18031⁄2 31⁄2 1⁄8 1.031 6 .859 1.059 .411 2.5784 4 1⁄8 1.181 5 .984 1.591 .539 2.953

Unequal Legs Bars per

b a t lb/ft Bundle† Area lx Sx Cx ly Sy Cy3⁄8 3⁄4 3⁄32 .116 60 .096 .003 .007 .465 .001 .001 .2771⁄2 1 1⁄8 .206 29 .172 .017 .027 .619 .003 .008 .3691⁄2 11⁄4 1⁄8 .244 25 .203 .032 .042 .755 .003 .008 .3801⁄2 11⁄2 1⁄8 .281 25 .234 .053 .060 .888 .003 .008 .3881⁄2 2 1⁄8 .355 20 .297 .118 .103 1.148 .003 .008 .3983⁄4 1 1⁄8 .244 25 .203 .020 .029 .668 .009 .017 .5433⁄4 11⁄2 1⁄8 .319 18 .266 .061 .064 .952 .010 .018 .5773⁄4 2 1⁄8 .394 15 .328 .136 .111 1.223 .011 .019 .5981 11⁄2 1⁄8 .356 15 .300 .068 .068 1.003 .024 .032 .7531 13⁄4 1⁄8 .394 16 .328 .104 .091 1.146 .025 .033 .7711 2 1⁄8 .431 15 .359 .150 .117 1.285 .026 .033 .7851 2 3⁄16 .633 10 .529 .215 .170 1.262 .037 .048 .7621 21⁄2 1⁄8 .506 12 .422 .277 .178 1.558 .028 .034 .8081 3 1⁄8 .581 10 .484 .456 .250 1.825 .029 .035 .82511⁄4 31⁄2 1⁄8 .694 9 .578 .750 .347 2.160 .057 .055 1.03511⁄2 13⁄4 1⁄8 .469 14 .391 .120 .097 1.233 .081 .073 1.10811⁄2 2 1⁄8 .506 12 .422 .173 .125 1.382 .085 .075 1.13211⁄2 21⁄2 1⁄8 .581 10 .484 .319 .191 1.671 .090 .077 1.1712 21⁄2 1⁄8 .656 10 .554 .344 .194 1.779 .196 .129 1.5232 3 1⁄8 .731 9 .069 .580 .282 2.053 .213 .137 1.5532 31⁄2 1⁄8 .806 8 .672 .881 .377 2.339 .222 .140 1.5892 4 1⁄8 .881 7 .734 1.266 .483 2.618 .229 .141 1.38221⁄4 51⁄4 1⁄8 1.106 6 .992 2.749 .817 3.363 .340 .182 1.86321⁄2 31⁄2 1⁄8 .881 7 .734 .951 .391 2.432 .416 .215 1.9323 31⁄2 1⁄8 .956 6 .797 1.009 .402 2.511 .692 .306 2.2613 4 1⁄8 1.031 6 .859 1.452 .517 2.810 .719 .311 2.3103 5 1⁄8 1.181 5 .984 2.658 .784 3.390 .762 .319 2.3904 5 1⁄8 1.331 5 1.109 2.924 .820 3.564 1.698 .554 3.064

b

t

a

yC

C

x

ALUMINUM Alloy 6063-T52

ANGLESSharp Corners16' lengths

† Aluminum extrusions are pre-wrapped in 100-lb.paper interleaved bundles to speed shipment andprevent damage. Quantities are subject to changewithout notice.

108


109




CHANNELSSharp Corners16' lengths,except as noted

ALumiNum Alloy 6063-T52

Bars per b a t lb/ft Bundle† Area lx Sx Cx ly Sy½ þ Þ .150 38 .128 .002 .007 .219 .004 .014½ ½ ³ .148 35 .126 .003 .009 .348 .004 .017½ ¾ Þ .263 22 .224 .011 .027 .402 .007 .028Ž Ž Þ .244 23 .207 .007 .020 .370 .011 .034Ž 1 Þ .356 16 .297 .028 .050 .569 .017 .053¾ þ Þ .187 35 .159 .002 .009 .238 .011 .028¾ ½ Þ .225 30 .191 .004 .013 .323 .014 .037¾ ¾ Þ .300 20 .250 .014 .030 .453 .020 .0531* ½ Þ .263 18 .219 .005 .014 .330 .028 .0571 Ž Þ .304 25 .250 .009 .022 .406 .035 .0691 ¾ Þ .337 20 .281 .015 .031 .479 .040 .0811 1 Þ .413 12 .344 .034 .055 .619 .053 .1051 2 Þ .713 8 .594 .236 .200 1.148 .101 .2021¼* ½ Þ .300 16 .250 .005 .015 .344 .050 .0801¼* Ž Þ .337 12 .281 .010 .023 .424 .060 .0961¼* ¾ Þ .374 12 .312 .016 .032 .500 .070 .1121¼ 1¼ Þ .526 12 .438 .069 .088 .853 .110 .1761½* ½ Þ .337 16 .281 .005 .015 .354 .080 .1061½* Ž Þ .374 12 .312 .010 .023 .437 .094 .1261½ ¾ Þ .413 16 .344 .017 .033 .517 .109 .1461½ 1 Þ .487 12 .406 .039 .059 .668 .139 .1851½ 1½ Þ .637 8 .531 .123 .129 .952 .198 .2641¾ ½ Þ .374 15 .312 .005 .015 .362 .118 .1351¾ ¾ Þ .450 12 .375 .018 .034 .531 .159 .1821¾ 1 Þ .524 12 .438 .042 .060 .688 .200 .2292 ½ Þ .413 14 .344 .006 .015 .369 .166 .1662* 1 Þ .564 8 .469 .043 .062 .704 .276 .2762 2 Þ .863 6 .719 .301 .234 1.285 .496 .4962¼ ž Þ .563 11 .469 .031 .048 .637 .331 .2942½ ¾ Þ .564 10 .469 .020 .036 .562 .383 .3072½ 1½ Þ .787 8 .656 .147 .140 1.045 .648 .5182½ 2½ Þ 1.062 6 .906 .599 .370 1.619 1.001 .8013 ½ Þ .563 11 .469 .006 .017 .387 .475 .3173 1 Þ .713 8 .594 .049 .065 .753 .734 .4893 2 Þ .955 6 .844 .346 .250 1.382 1.250 .8343 3 Þ 1.293 4 1.094 1.050 .538 1.952 1.767 1.1784 1½ Þ 1.013 6 .844 .169 .150 1.132 1.960 .9794½ 1½ Þ 1.090 4 4½** 2 Þ 1.238 4 1.031 .394 .265 1.483 3.190 1.4205 2 ð 1.940 2 1.621 .584 .393 1.486 5.900 2.360

* 20' lengths ** For glass block

ALumiNum

† Aluminum extrusions are pre-wrapped in 100-lb. paper interleaved bundles to speed shipment and prevent damage. Quantities are subject to change without notice.

Bars per Minor Axis Major Axisa b d t lb/ft Bundle† Area lx Sx ly Sy½ ½ ½ ³ .148 40 .169 .004 .017 .006 .016¾ ¾ ¾ Þ .300 21 .250 .020 .053 .027 .039ž ¾ ¾ Þ .319 20 .266 .029 .067 .027 .0391 Ž ž Þ .337 18 .281 .056 .063 .015 .0471 1Þ 1Þ Þ .450 14 .375 .058 .117 .100 .094

ZEESSharp Corners16' lengths

Bars per b a t lb/ft Bundle† Area lx Sx Cx ly Sy¾ ¾ Þ .206 30 .171 .009 .017 .518 .004 .012¾ 1¼ Þ .280 20 .233 .037 .045 .814 .004 .0121 ¾ Þ .244 23 .202 .009 .017 .544 .010 .0211 1 Þ .281 20 .233 .022 .031 .705 .011 .0211Þ ½ .338 20 .282 .005 .016 .318 .020 .0321Þ 1Þ Þ .319 19 .265 .031 .039 .924 .015 .0271¼ ž Þ .300 21 .249 .016 .024 .649 .020 .0331½ 1½ Þ .431 12 .358 .077 .072 1.080 .035 .0472 ¾ Þ .394 16 .322 .010 .017 .600 .083 .0832 2 ð .856 6 .717 .271 .190 1.430 .126 .126

Item No. 6958 Table Þ", Leg þ"

TEESSharp Corners16' lengths

Cx

x

t

b

a

t

b

a

y

Cx

x

t

b

a

t

b

a

y

t

b

a

1"

1"Þ"

d

b

a

t

x

y

d

b

a

t

c

b

a Þ"

c

b

a t

t

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

x




ALUMINUM

b

a

y

x

FLAT BARSSharp Corners16' lengths

Bars pera b lb/ft Bundle† Area lx Sx ly Sy1⁄8 1⁄2 .075 60 .063 .000 .001 .001 .0051⁄8 5⁄8 .094 48 .078 .000 .002 .003 .0081⁄8 3⁄4 .113 59 .094 .000 .002 .004 .0121⁄8 1 .150 48 .125 .000 .003 .010 .0201⁄8 11⁄8 .169 29 .141 .000 .003 .015 .0261⁄8 11⁄4 .187 29 .156 .000 .003 .020 .0321⁄8 11⁄2 .226 27 .188 .000 .004 .035 .0471⁄8 13⁄4 .263 19 .219 .000 .005 .056 .0641⁄8 2 .300 20 .250 .000 .005 .083 .0831⁄8 21⁄2 .376 15 .313 .000 .007 .163 .1301⁄8 3 .450 12 .375 .000 .008 .281 .1871⁄8 31⁄2 .526 12 .438 .001 .009 .447 .2551⁄8 4 .600 10 .500 .001 .010 .667 .3341⁄8 5 .750 8 .625 .001 .013 1.302 .5213⁄16 1⁄2 .113 60 .094 .000 .002 .002 .0083⁄16 3⁄4 .169 37 .141 .000 .004 .007 .0183⁄16 1 .226 30 .188 .001 .006 .016 .0323⁄16 11⁄4 .282 23 .235 .001 .007 .031 .0503⁄16 11⁄2 .337 19 .282 .001 .009 .053 .0713⁄16 13⁄4 .394 16 .329 .001 .010 .084 .0963⁄16 2 .450 12 .376 .001 .012 .125 .1253⁄16 21⁄2 .564 12 .470 .001 .015 .244 .1953⁄16 3 .677 10 .564 .002 .018 .422 .2813⁄16 4 .900 7 .752 .002 .023 1.000 .5001⁄4 1⁄2 .150 50 .125 .001 .005 .003 .0101⁄4 5⁄8 .187 31 .156 .001 .007 .005 .0161⁄4 3⁄4 .224 28 .188 .001 .008 .009 .0231⁄4 1 .300 20 .250 .001 .008 .021 .0421⁄4 11⁄4 .374 16 .313 .002 .016 .041 .0661⁄4 11⁄2 .450 12 .375 .002 .016 .070 .0931⁄4 13⁄4 .525 12 .438 .002 .016 .112 .1281⁄4 2 .600 10 .500 .003 .024 .167 .1671⁄4 21⁄2 .750 9 .625 .003 .024 .326 .2611⁄4 3 .900 7 .750 .004 .032 .563 .3751⁄4 31⁄2 1.050 5 .875 .005 .040 .893 .5101⁄4 4 1.200 5 1.000 .005 .040 1.333 .6671⁄4 5 1.500 4 1.250 .007 .056 2.604 1.0421⁄4 6 1.800 3 1.500 .008 .064 4.500 1.5005⁄16 1 .374 20 .313 .003 .019 .026 .0525⁄16 11⁄2 .562 11 .469 .004 .026 .088 .1175⁄16 2 .749 8 .625 .005 .032 .208 .2085⁄16 6 2.170 3 1.875 .015 .096 5.625 1.8753⁄8 1⁄2 .224 24 .188 .002 .012 .004 .0163⁄8 5⁄8 .281 20 .234 .003 .015 .008 .0243⁄8 3⁄4 .338 15 .281 .003 .018 .013 .0353⁄8 1 .450 12 .375 .004 .021 .031 .0623⁄8 11⁄4 .563 10 .469 .005 .027 .061 .0983⁄8 11⁄2 .674 9 .563 .007 .037 .106 .1413⁄8 13⁄4 .784 7 .656 .008 .043 .168 .1923⁄8 2 .900 7 .750 .009 .048 .250 .2503⁄8 21⁄2 1.126 5 .938 .011 .059 .488 .3903⁄8 3 1.350 4 1.125 .013 .069 .844 .5633⁄8 31⁄2 1.576 4 1.313 .015 .080 1.340 .7673⁄8 4 1.800 3 1.500 .018 .096 2.000 1.0003⁄8 5 2.260 3 1.875 .022 .177 3.906 1.5631⁄2 3⁄4 .450 14 .375 .008 .031 .018 .0471⁄2 1 .600 10 .500 .010 .040 .042 .0841⁄2 11⁄4 .750 8 .625 .013 .052 .081 .1301⁄2 11⁄2 .900 6 .750 .016 .064 .141 .1881⁄2 13⁄4 1.050 5 .875 .018 .072 .223 .255


110






1.900" 3⁄4" 11⁄4"21⁄2" 3⁄4" 11⁄4"

ALUMINUM

Bars pera b lb/ft Bundle† Area lx Sx ly Sy1⁄2 2 1.200 6 1.000 .021 .084 .333 .3331⁄2 21⁄2 1.500 4 1.250 .026 .104 .651 .5201⁄2 3 1.800 3 1.500 .031 .124 1.125 .7501⁄2 31⁄2 2.100 3 1.750 .036 .144 1.787 1.0201⁄2 4 2.400 2 2.000 .042 .168 2.667 1.3335⁄8 1 .750 8 .625 .020 .064 .052 .1045⁄8 11⁄4 .937 6 .781 .025 .080 .102 .1635⁄8 11⁄2 1.124 5 .938 .031 .099 .176 .2355⁄8 2 1.500 4 1.250 .041 .131 .417 .4175⁄8 3 2.250 2 1.875 .061 .195 1.406 .9373⁄4 1 .900 6 .750 .035 .094 .063 .1253⁄4 11⁄4 1.126 5 .938 .044 .117 .122 .1953⁄4 11⁄2 1.350 5 1.125 .053 .141 .210 .2813⁄4 13⁄4 1.576 4 1.313 .062 .166 .335 .3883⁄4 2 1.800 3 1.500 .070 .188 .500 .5003⁄4 21⁄2 2.250 2 1.875 .088 .234 .977 .7813⁄4 3 2.700 2 2.250 .106 .281 1.688 1.1253⁄4 31⁄2 3.150 2 2.625 .123 .329 2.680 1.5303⁄4 4 3.600 1 3.000 .141 .375 4.000 2.0001 11⁄4 1.500 4 1.250 .104 .208 .163 .2611 11⁄2 1.800 3 1.500 .125 .250 .281 .3751 13⁄4 2.100 3 1.750 .146 .292 .447 .5101 2 2.400 2 2.000 .167 .333 .667 .6671 21⁄2 3.000 2 2.500 .208 .417 1.302 1.0421 3 3.600 1 3.000 .250 .500 2.250 1.5001 4 4.800 1 4.000 .333 .667 5.333 2.667

b

a

y

x

FLAT BARS (continued)Sharp Corners16' lengths

Bars pera b lb/ft Bundle† Area l S1⁄4 1⁄4 .075 88 .063 .000 .0035⁄16 5⁄16 .116 48 .097 .001 .0053⁄8 3⁄8 .169 40 .141 .002 .0091⁄2* 1⁄2 .300 20 .250 .005 .0215⁄8* 5⁄8 .468 12 .391 .013 .0413⁄4 3⁄4 .674 10 .563 .026 .0701 1 1.200 5 1.000 .083 .16711⁄4 11⁄4 1.875 3 1.563 .204 .32611⁄2 11⁄2 2.700 2 2.250 .422 .56313⁄4 13⁄4 3.676 1 3.063 .782 .8932 2 4.800 2 4.000 1.333 1.333

* 16' & 20' lengths

a

SQUARE BARSSharp Corners16' lengths,except as noted

ROUND BARS16' lengths,except as noted

b

a


111


Bars pera lb/ft Bundle† Area l S3⁄8 .132 50 .110 .001 .0051⁄2 .235 25 .196 .003 .0125⁄8 .368 18 .307 .008 .0243⁄4 .530 12 .442 .016 .0417⁄8*† .727 12 .601 .029 .0661*† .942 7 .785 .049 .09811⁄8*† 1.192 7 .994 .079 .14011⁄4* 1.472 3 1.227 .120 .19211⁄2 2.120 3 1.767 .249 .3311.600** 2.415 2.010 .322 .4021.680** 2.662 2.216 .391 .4651.688*† 2.684 2.237 .398 .47013⁄4 2.886 2.404 .460 .5262* 3.770 3.142 .785 .78525⁄8† 6.500 5.412 2.331 1.0303*† 8.483 7.069 3.974 2.649

* 6063-T6 ** 6061-T6 † 12' lengths


112




ALUMINUM

b b

b

a a

a

ROUNDCORNERBARS20' lengths

Corner Bars per a b Radius lb/ft Bundle† Area Ix Sx Iy Sy6988 ½ 2 1/4 1.138 Oval 4 .946 .019 .075 .285 .2856939 ¾ 2½ 3/16 2.214 Rect. 2 1.845 .085 .225 .932 .7466986 ¾ 3 1/8 2.684 Rect. 2 2.237 .104 .277 1.658 1.1066423 1¼ 1¼ 3/32 1.876 Sq. 2 1.555 .201 .321 .201 .3216424 1¼ 2¾ 3/32 4.124 Rect. 1 3.430 .445 .712 2.153 1.566

Bars per lb/ft Bundle†6434* Aluminum 1.123 5* 6063-T6 For elements of section, see page 124.

This pipe is of tubing quality and has a smooth, clean surface and close dimensional tolerances which make it suitable for architectural work and for anodizing. It is easy to bend. Pipe is furnished and carefully wrapped for protection in handling and shipping. See pages 14-30 for stock pipe fittings.

NominalSize Sched. OD ID t lb/ft Area l S r1¼* 10 1.660 1.442 .109 .625 .531 .161 .193 .5501¼* 40 1.660 1.380 .140 .785 .669 .195 .235 .5401½* 10 1.900 1.682 .109 .721 .614 .247 .260 .6341½* 40 1.900 1.610 .145 .940 .800 .310 .326 .623

* Carried in stock with mill finish and with a clear anodized – AA-M10-C22-A31 (204R1) – finish.

This premium quality drawn pipe has an extra smooth surface. Its harder temper gives it high strength. See pages 14-30 for stock pipe fittings.

DRAWNHANDRAILPIPEAlloy 6063-T83220' lengths

EXTRUDEDHANDRAILPIPEAlloy 6063-T5220' lengths

† Aluminum extrusions are pre-wrapped in 100-lb. paper interleaved bundles to speed shipment and prevent damage. Quantities are subject to change without notice.

TUBING

RoundCorner20' lengths

ALUMINUMAlloy 6063-T52, except as noted

2¾"

.125"1¼"

1¼"

2¾"

2¾"

.125"1¼ "

.125"

.125"

2¾"

2¾"

.125"

1¼"

1¼"

Bars per lb/ft Bundle†6436 Aluminum .888 6

2ð"

1ð".125"

2ð"

1ð"

.125"

Bars per lb/ft Bundle†6435 Aluminum 1.075 5

Nominal Bars perSize Sched. OD ID t lb/ft Bundle† Area l S r¾ 40 1.050 .824 .113 .391 14 .333 .037 .071 .3341 40 1.315 1.049 .133 .581 9 .494 .087 .133 .4211¼* 10 1.660 1.442 .109 .625 6 .531 .161 .193 .5501¼* 40 1.660 1.380 .140 .785 6 .669 .195 .235 .5401½* 10 1.900 1.682 .109 .721 5 .614 .247 .260 .6341½* 40 1.900 1.610 .145 .940 5 .800 .310 .326 .6232 40 2.375 2.067 .154 1.264 3 1.075 .666 .561 .787

* Carried in stock with mill finish and with a clear anodized – AA-M10-C22-A31 (204R1) – finish.

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD

1½"

.100"

t

OD

.100

"

OD OD

t

OD

.062"

t

OD

t

1.900"

t

OD

t

1.900"

t

OD



ALUMINUM


Bars per a b t lb/ft Bundle† Area l S1⁄2 1⁄2 .062 .130 36 .109 .003 .0145⁄8 5⁄8 .062 .167 31 .142 .007 .0243⁄4 3⁄4 .062 .205 24 .171 .013 .0363⁄4 3⁄4 .125 .374 10 .312 .021 .0561 1 .062 .278 16 .233 .034 .0681 1 .125 .525 8 .437 .057 .11411⁄4 11⁄4 .078 .438 9 .366 .084 .13411⁄4 11⁄4 .125 .675 8 .562 .120 .19211⁄2 11⁄2 .078 .532 8 .444 .150 .20011⁄2 11⁄2 .125 .825 6 .687 .218 .29113⁄4 13⁄4 .125 .975 4 .812 .360 .4112 2 .078 .720 6 .600 .370 .3702 2 .125 1.124 4 .937 .552 .55221⁄2 21⁄2 .125 1.424 3 1.187 1.119 .8963 3 .125 1.724 2 1.437 1.984 1.3234 4 .125 2.324 2 1.937 4.854 2.427

Bars per Minor Axis Major Axisb a t lb/ft Bundle† Area lx Sx ly Sy1⁄2 1 .125 .374 12 .312 .009 .003 .033 .0663⁄4 11⁄2 .125 .588 8 .500 .040 .106 .130 .1731 11⁄2 .125 .661 6 .562 .081 .162 .159 .2121 2 .125 .825 6 .687 .105 .210 .332 .3321 3 .125 1.119 4 .937 .153 .307 .950 .63311⁄4 21⁄2 .125 1.050 4 .875 .219 .351 .678 .54311⁄4 3 .125 1.200 4 1.000 .259 .415 1.079 .72011⁄2 2 .125 .967 4 .812 .278 .370 .442 .44211⁄2 21⁄2 .125 1.124 4 .937 .337 449 .767 .61311⁄2 3 .125 1.276 4 1.022 .384 .512 1.167 .77811⁄2 6 .125 2.135 2 1.812 .752 1.002 7.197 2.39913⁄4 21⁄4 .125 1.125 4 .937 .442 .505 .661 .58813⁄4 3 .125 1.323 3 1.125 .566 .647 1.338 .89213⁄4 31⁄2 .125 1.470 3 1.250 .649 .742 1.962 1.12113⁄4 4 .125 1.650 3 1.375 .732 .836 2.742 1.37113⁄4 41⁄2 .125 1.765 2 1.500 .814 .931 3.693 1.64113⁄4 5 .125 1.910 2 1.625 .897 1.025 4.833 1.9332 21⁄2 .125 1.280 1.063 .662 .529 .943 .7542 3 .125 1.395 3 1.187 .772 .772 1.467 .9782 4 .125 1.710 3 1.438 .992 .992 2.976 1.4882 5 .125 2.025 2 1.687 1.212 1.212 5.204 2.0822 6 .125 2.326 2 1.937 1.432 1.432 8.276 2.7593 5 .125 2.326 2 1.937 3.018 2.012 6.690 2.6763 6 .188 3.882 3.226 5.010 3.340 15.032 5.010

b

a

t

SquareSharp Corners21'-1" lengths

Round20' lengths

t

OD

Bars per OD t lb/ft Bundle† Area l S21⁄2 .125 1.119 6 .933 .659 .5273 .125 1.330 1.129 1.169 .77931⁄2 .125 1.560 1.325 1.890 1.080

See page 30 for fittings.

b

a

t

x

y

TUBING

RectangularSharp Corners21'-1" lengths

3"

11 ⁄4"

x

y.125"

Bars per lb/ft Bundle† Area lx Sx ly Sy

6437 1.057 5 .879 .210 .336 .799 .532

Oval20' lengths







ALUMINUM

Equal Legs a b t lb/ft Area l S r C3⁄4 3⁄4 1⁄8 .20 .17 .008 .016 .219 .521 1 1⁄8 .28 .23 .021 .029 .298 .711 1 3⁄16 .40 .34 .029 .042 .293 .691 1 1⁄4 .51 .44 .036 .054 .287 .6611⁄4 11⁄4 1⁄8 .35 .30 .042 .046 .37 .9011⁄4 11⁄4 3⁄16 .51 .43 .059 .068 .37 .8811⁄4 11⁄4 1⁄4 .66 .56 .074 .087 .36 .8511⁄2 11⁄2 1⁄8 .43 .36 .074 .068 .45 1.0911⁄2 11⁄2 3⁄16 .62 .53 .107 .100 .45 1.0611⁄2 11⁄2 1⁄4 .83 .69 .135 .130 .44 1.0413⁄4 13⁄4 1⁄8 .51 .42 .121 .094 .53 1.2813⁄4 13⁄4 3⁄16 .74 .63 .174 .139 .53 1.2513⁄4 13⁄4 1⁄4 .96 .81 .223 .181 .52 1.23

2 2 1⁄8 .57 .49 .18 .13 .61 1.472 2 3⁄16 .85 .72 .27 .19 .61 1.442 2 1⁄4 1.11 .94 .34 .24 .60 1.422 2 5⁄16 1.36 1.16 .41 .30 .60 1.392 2 3⁄8 1.59 1.37 .47 .35 .59 1.3721⁄2 21⁄2 1⁄8 .72 .62 .37 .20 .77 1.8521⁄2 21⁄2 3⁄16 1.07 .91 .54 .30 .77 1.8221⁄2 21⁄2 1⁄4 1.40 1.19 .69 .39 .76 1.7921⁄2 21⁄2 5⁄16 1.73 1.47 .84 .48 .76 1.7721⁄2 21⁄2 3⁄8 2.05 1.74 .98 .56 .75 1.74

3 3 3⁄16 1.28 1.09 .91 .41 .91 2.213 3 1⁄4 1.68 1.43 1.18 .54 .91 2.183 3 5⁄16 2.08 1.77 1.45 .67 .91 2.153 3 3⁄8 2.47 2.10 1.70 .80 .90 2.133 3 1⁄2 3.41 2.74 2.16 1.04 .89 2.0831⁄2 31⁄2 1⁄4 1.99 1.69 1.93 .76 1.07 2.5631⁄2 31⁄2 3⁄8 2.93 2.49 2.79 1.11 1.06 2.5031⁄2 31⁄2 1⁄2 3.83 3.25 3.56 1.45 1.05 2.45

4 4 1⁄4 2.28 1.94 2.94 1.00 1.23 2.934 4 5⁄16 2.83 2.41 3.61 1.24 1.23 2.904 4 3⁄8 3.38 2.86 4.26 1.48 1.22 2.884 4 1⁄2 4.41 3.75 5.46 1.93 1.21 2.835 5 3⁄8 4.28 3.60 8.37 2.30 1.52 3.645 5 1⁄2 5.58 4.74 10.89 3.03 1.52 3.596 6 3⁄8 5.12 4.35 14.85 3.38 1.85 4.406 6 1⁄2 6.75 5.74 19.38 4.46 1.84 4.348 8 1⁄2 9.14 7.77 47.74 8.16 2.48 5.85

a

b

t

yC

C

x

STRUCTURAL ANGLES25' lengths

114






ALUMINUM

Unequal Legs a b t lb/ft Area lx Sx rx Cx ly Sy ry Cy

11⁄2 11⁄4 1⁄4 .74 .63 .127 .126 .45 1.13 .079 .090 .36 .7613⁄4 11⁄4 1⁄8 .42 .36 .108 .090 .55 1.45 .046 .048 .36 .7113⁄4 11⁄4 3⁄16 .62 .53 .156 .132 .54 1.43 .066 .071 .35 .68

2 11⁄2 1⁄8 .50 .42 .17 .12 .63 1.64 .08 .07 .44 .902 11⁄2 3⁄16 .73 .62 .24 .18 .62 1.62 .12 .10 .43 .872 11⁄2 1⁄4 .96 .81 .31 .23 .62 1.59 .15 .14 .43 .8421⁄2 11⁄2 1⁄4 1.11 .94 .59 .36 .79 1.13 .16 .14 .41 1.6421⁄2 2 3⁄16 .96 .82 .50 .29 .78 1.99 .29 .19 .59 1.2521⁄2 2 1⁄4 1.26 1.07 .65 .38 .78 1.97 .37 .25 .58 1.2221⁄2 2 5⁄16 1.55 1.32 .78 .46 .77 1.95 .44 .30 .58 1.20

3 2 3⁄16 1.07 .91 .82 .40 .95 2.54 .29 .19 .56 1.063 2 1⁄4 1.40 1.19 1.06 .52 .94 2.52 .38 .25 .56 1.033 21⁄2 1⁄4 1.54 1.31 1.12 .53 .92 2.36 .70 .38 .73 1.613 21⁄2 3⁄8 2.25 1.92 1.60 .78 .91 2.31 1.00 .55 .72 1.5631⁄2 21⁄2 1⁄4 1.68 1.43 1.73 .72 1.10 2.90 .73 .38 .71 1.4131⁄2 21⁄2 5⁄16 2.08 1.77 2.12 .89 1.09 2.88 .89 .48 .71 1.3831⁄2 21⁄2 3⁄8 2.47 2.10 2.49 1.06 1.09 2.85 1.05 .57 .71 1.3631⁄2 3 1⁄4 1.84 1.57 1.84 .74 1.08 2.74 1.28 .57 .90 1.91

4 3 1⁄4 1.99 1.69 2.68 .96 1.26 3.28 1.29 .56 .87 1.794 3 3⁄8 2.93 2.49 3.88 1.42 1.25 3.23 1.86 .83 .86 1.744 3 1⁄2 3.83 3.25 4.96 1.85 1.24 3.18 2.36 1.08 .85 1.69

5 3 3⁄8 3.35 2.85 7.15 2.15 1.59 4.31 1.93 .84 .82 1.325 3 1⁄2 4.40 3.74 9.24 2.83 1.57 4.26 2.48 1.10 .81 1.275 31⁄2 5⁄16 3.01 2.56 6.39 1.85 1.58 4.19 2.58 .96 1.00 1.955 31⁄2 3⁄8 3.58 3.05 7.56 2.21 1.58 4.16 3.04 1.15 1.00 1.925 31⁄2 1⁄2 4.70 4.00 9.77 2.90 1.56 4.11 3.91 1.50 .99 1.87

6 31⁄2 5⁄16 3.39 2.88 10.64 2.64 1.92 5.26 2.70 .98 .97 1.536 31⁄2 1⁄2 5.31 4.51 16.34 4.14 1.90 5.18 4.11 1.53 .95 1.446 4 3⁄8 4.24 3.60 13.02 3.17 1.90 5.09 4.63 1.50 1.13 2.106 4 1⁄2 5.58 4.74 16.95 4.19 1.89 5.03 6.01 1.98 1.13 2.04

8 6 3⁄4 11.68 9.93 62.60 11.47 2.51 6.45 30.15 6.77 1.74 3.46

STRUCTURAL ANGLES25' lengths

t

a

b

yCy

Cx

x

115






ALUMINUM

STRUCTURAL CHANNELS25' lengths

b

a

Cy

t

x

y

b

a

Cy

t

x

y

Aluminum Association Standard a b t lb/ft Area lx Sx rx ly Sy ry Cy2.00 1.00 .13 .577 .491 .288 .288 .766 .045 .064 .303 .702.00 1.25 .17 1.071 .911 .546 .546 .774 .139 .178 .391 .783.00 1.50 .13 1.135 .965 1.41 .94 1.21 .22 .22 .47 1.013.00 1.75 .17 1.597 1.358 1.97 1.31 1.20 .42 .37 .55 1.134.00 2.00 .15 1.738 1.478 3.91 1.95 1.63 .60 .45 .64 1.354.00 2.25 .19 2.331 1.982 5.21 2.60 1.62 1.02 .69 .72 1.475.00 2.25 .15 2.212 1.881 7.88 3.15 2.05 .98 .64 .72 1.525.00 2.75 .19 3.089 2.627 11.14 4.45 2.06 2.05 1.14 .88 1.806.00 2.50 .17 2.834 2.410 14.35 4.78 2.44 1.53 .90 .80 1.716.00 3.25 .21 4.030 3.427 21.04 7.01 2.48 3.76 1.76 1.05 2.137.00 2.75 .17 3.205 2.725 22.09 6.31 2.85 2.10 1.10 .88 1.917.00 3.50 .21 4.715 4.009 33.79 9.65 2.90 5.13 2.23 1.13 2.308.00 3.00 .19 4.147 3.526 37.40 9.35 3.26 3.25 1.57 .96 2.078.00 3.75 .25 5.789 4.923 52.69 13.17 3.27 7.13 2.82 1.20 2.539.00 4.00 .29 6.970 5.927 78.31 17.40 3.63 9.61 3.49 1.27 2.7510.00 3.50 .25 6.136 5.218 83.22 16.64 3.99 6.33 2.56 1.10 2.4810.00 4.25 .31 8.360 7.109 116.15 23.23 4.04 13.02 4.47 1.35 2.9112.00 4.00 .29 8.274 7.036 159.76 26.63 4.77 11.03 3.86 1.25 2.8612.00 5.00 .35 11.822 10.053 239.69 39.95 4.88 25.74 7.60 1.60 3.39

American Standard a b t lb/ft Area lx Sx rx ly Sy ry Cy3 1.410 .170 1.420 1.21 1.66 1.10 1.17 .20 .20 .40 .9703 1.498 .258 1.730 1.47 1.85 1.24 1.12 .25 .23 .41 1.0583 1.596 .356 2.070 1.76 2.07 1.38 1.08 .31 .27 .42 1.1364 1.580 .180 1.850 1.57 3.83 1.92 1.56 .32 .28 .45 1.1204 1.647 .247 2.160 1.84 4.19 2.10 1.51 .37 .31 .45 1.1974 1.720 .320 2.500 2.13 4.58 2.29 1.47 .43 .34 .45 1.2605 1.750 .190 2.320 1.97 7.49 3.00 1.95 .48 .38 .49 1.2705 1.885 .325 3.110 2.64 8.90 3.56 1.83 .63 .45 .49 1.4055 2.032 .472 3.970 3.38 10.43 4.17 1.76 .81 .53 .49 1.5226 1.920 .200 2.830 2.40 13.12 4.37 2.34 .69 .49 .54 1.4106 1.945 .225 3.000 2.55 13.57 4.52 2.31 .73 .51 .54 1.4356 2.034 .314 3.630 3.09 15.18 5.06 2.22 .87 .56 .53 1.5346 2.157 .437 4.480 3.82 17.39 5.80 2.13 1.05 .64 .52 1.6477 2.110 .230 3.540 3.01 21.84 6.24 2.69 1.01 .64 .58 1.5707 2.194 .314 4.230 3.60 24.24 6.93 2.60 1.17 .70 .57 1.6748 2.290 .250 4.250 3.62 33.85 8.46 3.06 1.40 .81 .62 1.7308 2.343 .303 4.750 4.04 36.11 9.03 2.99 1.53 .85 .61 1.7938 2.435 .395 5.620 4.78 40.04 10.01 2.90 1.75 .93 .61 1.8858 2.527 .487 6.480 5.51 43.96 10.99 2.82 1.98 1.01 .60 1.9579 2.430 .230 4.600 3.91 47.68 10.60 3.49 1.75 .96 .67 1.8309 2.648 .448 6.910 5.88 60.92 13.54 3.22 2.42 1.17 .64 2.06810 2.600 .240 5.280 4.49 67.37 13.47 3.87 2.28 1.16 .71 1.97010 2.886 .526 8.640 7.35 91.20 18.24 3.52 3.36 1.48 .68 2.26612 2.960 .300 7.410 6.30 131.84 21.97 4.57 3.99 1.76 .80 2.25012 3.047 .387 8.640 7.35 144.37 24.06 4.43 4.47 1.89 .78 2.37712 3.170 .510 10.370 8.82 162.08 27.01 4.29 5.14 2.06 .76 2.50015 3.400 .400 11.710 9.96 314.76 41.97 5.62 9.63 3.11 .90 2.610

116






ALUMINUM

b

a

t

Rectangular

Square

a

b

t

x

y

a b t lb/ft Area lx Sx rx ly Sy ry6 4 .230 4.16 3.54 21.75 7.25 2.48 2.98 1.49 .926 6 .240 5.40 4.59 30.17 10.06 2.56 9.69 3.23 1.458 51⁄4 .230 5.90 5.02 56.73 14.18 3.36 7.44 2.83 1.228 61⁄2 .245 8.32 7.08 84.15 21.04 3.44 18.23 5.61 1.618 8 .288 10.72 9.12 109.66 27.41 3.47 36.97 9.24 2.0110(9.90) 53⁄4 .240 7.30 6.21 106.74 21.56 4.15 10.77 3.75 1.32

a b t lb/ft Area lx Sx rx Cx ly Sy ry2 2 1⁄4 1.26 1.07 .37 .26.59 1.42 .18 .18 .413 3 3⁄8 2.72 2.31 1.83 .86.89 2.12 .90 .60 .63

x

y

b

a

b

a x

y

t

ab

x

y

Cx

Aluminum Association Standard a b t lb/ft Area lx Sx rx ly Sy ry3.00 2.50 .13 1.637 1.392 2.24 1.49 1.27 .52 .42 .613.00 2.50 .15 2.030 1.726 2.71 1.81 1.25 .68 .54 .634.00 3.00 .15 2.310 1.965 5.62 2.81 1.69 1.04 .69 .734.00 3.00 .17 2.793 2.375 6.71 3.36 1.68 1.31 .87 .745.00 3.50 .19 3.699 3.146 13.94 5.58 2.11 2.29 1.31 .856.00 4.00 .19 4.030 3.427 21.99 7.33 2.53 3.10 1.55 .956.00 4.00 .21 4.693 3.990 25.50 8.50 2.53 3.74 1.87 .977.00 4.50 .23 5.800 4.932 42.89 12.25 2.95 5.78 2.57 1.088.00 5.00 .23 6.181 5.256 59.69 14.92 3.37 7.30 2.92 1.188.00 5.00 .25 7.023 5.972 67.78 16.94 3.37 8.55 3.42 1.2010.00 6.00 .25 8.646 7.352 132.09 26.42 4.24 14.78 4.93 1.4210.00 6.00 .29 10.286 8.747 155.79 31.16 4.22 18.03 6.01 1.4412.00 7.00 .29 11.671 9.925 255.57 42.60 5.07 26.90 7.69 1.65

a b t lb/ft Area lx Sx rx ly Sy ry4 4 .313 4.76 4.05 10.80 5.40 1.63 3.52 1.76 .935 5 .313 6.49 5.52 23.94 9.58 2.08 7.73 3.09 1.186 6 .250 7.85 6.68 44.25 14.75 2.57 14.02 4.67 1.45

a b t lb/ft Area I S2 2 1⁄8 1.126 .937 .552 .5522 2 3⁄16 1.627 1.343 .743 .74521⁄2 21⁄2 3⁄16 2.087 1.739 1.559 1.2473 3 3⁄16 2.538 2.115 2.798 1.8654 4 3⁄16 3.440 2.867 6.957 3.479

a b t lb/ft Area lx Sx ly Sy2 3 3⁄16 2.123 1.739 1.064 1.064 2.055 1.3702 4 3⁄16 2.538 2.115 1.374 1.374 4.226 2.1133 6 3⁄16 3.892 3.226 5.010 3.340 15.032 5.010

STRUCTURAL H-COLUMNSAlloy 6061-T625' lengths

STRUCTURAL TUBINGAlloy 6061-T624' lengths

American Standard a b t lb/ft Area lx Sx rx ly Sy ry3 2.330 .170 1.960 1.67 2.52 1.68 1.23 .46 .39 .523 2.509 .349 2.590 2.21 2.93 1.95 1.15 .59 .47 .524 2.660 .190 2.640 2.25 6.06 3.03 1.64 .76 .57 .584 2.796 .326 3.280 2.79 6.79 3.39 1.56 .90 .65 .575 3.000 .210 3.430 2.92 12.26 4.90 2.05 1.21 .81 .645 3.284 .494 5.100 4.34 15.22 6.09 1.87 1.66 1.01 .626 3.330 .230 4.300 3.66 22.08 7.36 2.46 1.82 1.09 .716 3.443 .343 5.100 4.34 24.11 8.04 2.36 2.04 1.19 .698 4.000 .270 6.350 5.40 57.55 14.39 3.27 3.73 1.86 .838 4.262 .532 8.810 7.49 68.73 17.18 3.03 4.66 2.19 .7910 4.600 .310 8.760 7.45 123.39 24.68 4.07 6.78 2.91 .9512 5.000 .350 10.990 9.35 218.13 36.35 4.83 9.35 3.74 1.00

STRUCTURAL TEESAlloy 6061-T625' lengths

STRUCTURAL WIDE FLANGE BEAMAlloy 6061-T625' lengths

STRUCTURAL I-BEAMSAlloy 6061-T625' lengths

b

a

t

x

y

117


t

ba x

y





STAINLESS Type 304 (18-8) Mill finish, smooth surface, suitable for polishing, except as noted

b a t lb/ft Area lx Sx Cx ly Sy1⁄2 1⁄2 .062 .284 .085 .002 .007 .310 .003 .0135⁄8* 5⁄16 .078 .293 .085 .001 .003 .206 .004 .0143⁄4 3⁄8 .062 .279 .085 .001 .004 .259 .001 .0033⁄4 3⁄4 .062 .451 .132 .015 .024 .621 .012 .0331 1⁄2 .062 .385 .116 .003 .007 .350 .017 .0341 1 .062 .591 .178 .019 .029 .643 .031 .06211⁄4 1⁄2 .062 .452 .132 .003 .008 .366 .029 .04711⁄2 1⁄2 .062 .492 .147 .003 .008 .377 .046 .061

* 22' lengths

Equal Legs a b t lb/ft Area l S C1⁄2 1⁄2 .062 .192 .058 .001 .004 .3525⁄8 5⁄8 .062 .247 .074 .003 .006 .4463⁄4 3⁄4 .062 .296 .089 .005 .009 .5393⁄4 3⁄4 .125 .596 .172 .009 .017 .5171 1 .062 .410 .120 .012 .016 .7271 1 .125 .808 .234 .022 .031 .70411⁄4 11⁄4 .062 .507 .151 .023 .025 .91411⁄4 11⁄4 .125 1.020 .297 .044 .049 .89111⁄2 11⁄2 .062 .605 .182 .041 .037 1.10211⁄2 11⁄2 .125 1.240 .359 .078 .072 1.079

b

a Cx

y

t

t

a

b

yC

C

x

b

a

y

x

a b lb/ft Area lx Sx ly Sy3⁄16 3⁄4 .478 .141 .000 .004 .007 .0183⁄16 1 .638 .188 .001 .006 .016 .0323⁄16 11⁄4 .797 .235 .001 .007 .031 .0503⁄16 11⁄2 .957 .282 .001 .009 .053 .0713⁄16 2 1.280 .376 .001 .012 .125 .1253⁄16 3 1.990 .564 .002 .018 .422 .2811⁄4 3⁄4 .636 .188 .001 .008 .009 .0231⁄4 1 .850 .250 .001 .008 .021 .0421⁄4 11⁄4 1.060 .313 .002 .016 .041 .0661⁄4 11⁄2 1.280 .375 .002 .016 .070 .0931⁄4 2 1.700 .500 .003 .024 .167 .1671⁄4 21⁄2 2.120 .625 .003 .024 .326 .2611⁄4 3 2.550 .750 .004 .032 .563 .3751⁄4 4 3.400 1.000 .005 .040 1.333 .6673⁄8 1 1.280 .375 .004 .021 .031 .0623⁄8 11⁄4 1.590 .469 .005 .027 .061 .0983⁄8 11⁄2 1.920 .563 .007 .037 .106 .1413⁄8 2 2.550 .750 .009 .048 .250 .2503⁄8 21⁄2 3.190 .938 .011 .059 .488 .3903⁄8 3 3.830 1.125 .013 .069 .844 .5633⁄8 4 5.100 1.500 .018 .096 2.000 1.0001⁄2 3⁄4 1.280 .375 .008 .031 .018 .0471⁄2 1 1.700 .500 .010 .040 .042 .0841⁄2 11⁄2 2.550 .750 .016 .064 .141 .1881⁄2 2 3.400 1.000 .021 .084 .333 .3331⁄2 21⁄2 4.250 1.250 .026 .104 .651 .5201⁄2 3 5.100 1.500 .031 .124 1.125 .7501⁄2 4 6.800 2.000 .042 .168 2.667 1.3333⁄4 1 2.550 .750 .035 .094 .063 .1253⁄4 11⁄2 3.830 1.125 .053 .141 .210 .2813⁄4 2 5.100 1.500 .070 .188 .500 .5003⁄4 3 7.650 2.250 .106 .281 1.688 1.1251 11⁄2 5.100 1.500 .125 .250 .281 .375

ROLLED ANGLES20' lengths

ROLLED CHANNELS20' lengths,except as noted

TRUE BARSSharp Corners12' to 14' lengths

1.900" 3⁄4" 11⁄4"

STAINLESS

118





STAINLESS

STAINLESS Type 304 (18-8) Mill finish, smooth surface, suitable for polishing, except as noted

a b t lb/ft Area I S3⁄4 3⁄4 .049 .472 .137 .011 .0301 1 .062 .835 .234 .034 .06911⁄4 11⁄4 .062 1.058 .297 .070 .11211⁄2 11⁄2 .062 1.281 .359 .124 .16613⁄4 13⁄4 .062 1.505 .422 .200 .2302 2 .062 1.728 .484 .303 .304

a lb/ft Area l S3⁄8 .378 .110 .001 .0051⁄2 .671 .196 .003 .0129⁄16* .850 .249 .005 .0185⁄8 1.050 .307 .008 .0243⁄4 1.510 .442 .016 .0417⁄8* 2.060 .601 .029 .0661* 2.680 .785 .049 .09811⁄4* 4.200 1.227 .120 .192

* Type 303

a

b

a

t

a

b

t

a

b

x

y

t

OD

SQUARE BARSSharp Corners12'–14' lengths

ROUND BARS12'–14' lengths

RoundOrnamental Grade20' lengths

SquareOrnamental Grade20' lengths

HANDRAIL PIPECold-rolled Ornamental Grade20' lengthsNo. 4, 180 grit, satin finish, paper-wrapped

Minor Axis Major Axislb/ft Area lx Sx ly Sy

4488 .944 .284 .011 .046 .107 .107

a b lb/ft Area l S1⁄2 1⁄2 .855 .250 .005 .0215⁄8 5⁄8 1.330 .391 .013 .0413⁄4 3⁄4 1.920 .563 .026 .0701 1 3.420 1.000 .083 .16711⁄4 11⁄4 5.310 1.563 .204 .326

TUBINGRectangularOrnamental Grade 20' lengths, except as noted

OvalOrnamental Grade20' lengths

OD ID lb/ft Area l S21⁄2 2.375 1.691 .497 .369 .2953 2.875 1.930 .577 .622 .4154 3.875 2.550 .804 1.556 .778

a b t lb/ft Area lx Sx rx ly Sy ry3⁄4 11⁄2 .062 .946 .266 .025 .066 .305 .076 .101 .5331 11⁄2 .062 1.048 .297 .048 .096 .403 .092 .122 .5561 2 .062 1.281 .359 .062 .124 .415 .186 .186 .7191 3 .062 1.728 .484 .089 .179 .430 .517 .345 1.03311⁄4 21⁄2 .062 1.616 .453 .125 .200 .525 .372 .297 .90613⁄4* 3 .062 2.062 .578 .312 .356 .734 .720 .480 1.11613⁄4* 4 .062 2.683 .703 .401 .458 .755 1.454 .727 1.438

**** 21'-1" lengths

.062

"

OD

2"

1 ⁄2"

.062

"

x

y

119

Nominal Pipe Size Sched OD t lb/ft Area l S r3⁄4 40 1.050 .113 1.200 .333 .037 .071 .3341 40 1.315 .120 1.460 .494 .087 .133 .42111⁄4 5 1.660 .062 1.110 .326 .104 .125 .56411⁄4 40 1.660 .148 2.150 .669 .195 .235 .54011⁄2† 5 1.900 .062 1.274 .375 .158 .166 .64911⁄2 40 1.900 .148 2.550 .800 .310 .326 .623

† Also available 2B mill finish


120




steel

equallegsa b t lb/ft Area I S C½ ½ Þ .38 .109 .002 .007 .330Ž Ž Þ .48 .141 .005 .011 .424¾ ¾ Ð .30 .089 .005 .009 .539¾ ¾ Þ .59 .172 .009 .017 .5171 1 Þ .81 .234 .022 .031 .7041 1 ð 1.16 .341 .030 .044 .6821¼ 1¼ Þ 1.02 .297 .044 .049 .8911¼ 1¼ ð 1.48 .435 .062 .071 .8691½ 1½ Þ 1.24 .359 .078 .072 1.0791½ 1½ ð 1.80 .529 .110 .104 1.0562 2 Þ 1.65 .484 .190 .131 1.4542 2 ð 2.44 .717 .273 .191 1.431

Unequallegsa b t lb/ft Area lx Sx Cx Iy Sy Cy1 Ž Þ .64 .187 .018 .029 .646 .005 .012 .1631¼ ¾ Þ .80 .234 .037 .045 .812 .010 .018 .5621½ 1 Þ 1.01 .297 .068 .068 1.003 .024 .032 .7532 1 Þ 1.23 .359 .149 .116 1.285 .026 .033 .785

a b c lb/ft4721 1ð Ž ¾ .944722 1 ½ Ž .74

steelC1010

COlD-ROlleDANGlesSquare Root and Square Edge20' lengths

HOt-ROlleDZeesSquare Root 20' lengths

b a t lb/ft Area Ix Sx Cx Iy Sy4735* Ž Ł .078 .29 .085 .001 .003 .206 .004 .0144736* ¾ þ .083 .40 .111 .001 .005 .252 .008 .0224753 2þ 2ð .156 3.41 1.005 .499 .351 1.420 1.880 1.5834754 1½ 1 .109 1.22 .358 .035 .052 .674 .117 .1554759 1¾ 1Þ .109 1.40 .412 .052 .067 .768 .198 .2264760 2 1 .125 1.59 .469 .044 .062 .704 .276 .276

* 22 lengths

equalsides

Unequalsides

b a t lb/ft Area Ix Sx Cx Iy Sy4730 ½ ½ .093 .40 .122 .003 .010 .299 .004 .0164732 ¾ ¾ .093 .57 .192 .011 .023 .465 .017 .0444734 1 1 .109 1.03 .303 .030 .049 .625 .048 .0964744 1¼ 1¼ .109 1.32 .385 .061 .078 .792 .099 .1584750 1½ 1½ .109 1.59 .467 .109 .114 .958 .178 .2374752 2 2 .125 2.41 .719 .309 .240 1.285 .496 .496

COlD-ROlleDCHANNelsSquare Root and Square Edge20' lengths, except as noted

b

t

a

y

b

t

a

C

C

x

b

t

a

y

b

t

a

C

C

x

b

t

a

y

b

t

a

C

C

x

b

t

a

y

b

t

a

C

C

x

b

t

a

y

b

t

a

C

C

x

t

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

x

t

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

xt

b

a

t

b

a

t

b

a

Cx

y

x

d

b

a

t

x

y

d

b

a

t

c

b

a Þ"

c

b

a t

b

t

a

y

b

t

a

Cy

Cx

x

b

t

a

y

b

t

a

Cy

Cx

x

b

t

a

y

b

t

a

Cy

Cx

x

b

t

a

y

b

t

a

Cy

Cx

x

a b t lb/ft 1 1 Þ .79

Cx

x

t

b

a

t

b

a

y

Cx

x

t

b

a

t

b

a

y

t

b

a

1"

1"Þ"

teesSquare Root 20' lengths




NICKEL-SILVER

NICKEL-SILVER C79800

b

t

a

yC

C

x

Equal Legs a b t lb/ft Area I S C1 1 1⁄8 .89 .234 .022 .031 .70411⁄2 11⁄2 1⁄8 1.35 .359 .780 .072 1.07911⁄2 11⁄2 1⁄4 2.52 .688 .139 .134 1.034

Unequal Legs a b t lb/ft Area Ix Sx Cx Iy Sy Cy2 1 1⁄8 1.33 .359 .150 .117 1.285 .026 .033 .785

t

b

a Cx

y

x

b a t lb/ft Area Ix Sx Cx Iy Sy1⁄2 1⁄2 3⁄32 .44 .126 .003 .009 .348 .004 .0173⁄4 3⁄4 1⁄8 .90 .250 .014 .030 .453 .020 .05311⁄4 1⁄2 1⁄8 .91 .250 .005 .015 .344 .050 .08011⁄2 1⁄2 1⁄8 1.02 .281 .005 .015 .354 .080 .106

ANGLESSharp Corners20' lengths

CHANNELSSharp Corners20' lengths

FLAT BARSSharp Corners16' lengths

b

a

y

x

a b lb/ft Area Ix Sx Iy Sy1⁄8 11⁄4 .58 .156 .000 .003 .020 .0321⁄8 11⁄2 .69 .188 .000 .004 .035 .0471⁄4 3⁄4 .69 .188 .001 .008 .009 .0231⁄4 11⁄4 1.15 .313 .002 .016 .041 .0661⁄4 2 1.84 .500 .003 .024 .167 .1671⁄4 3 2.77 .750 .004 .032 .563 .3753⁄8 3⁄4 1.04 .281 .003 .018 .013 .0353⁄8 1 1.38 .375 .004 .021 .031 .0623⁄8 11⁄4 1.73 .469 .005 .027 .061 .0983⁄8 11⁄2 2.07 .563 .007 .037 .106 .1413⁄8 2 2.76 .750 .009 .048 .250 .2503⁄8 3 4.11 1.125 .013 .069 .844 .5635⁄16 6 6.67 1.875 .015 .096 5.625 1.8751⁄2 3⁄4 1.37 .375 .008 .031 .018 .0471⁄2 11⁄2 2.76 .750 .016 .064 .141 .1881⁄2 2 3.68 1.000 .021 .084 .333 .3331⁄2 3 5.48 1.500 .031 .124 1.125 .7503⁄4 1 2.74 .750 .035 .094 .063 .1253⁄4 11⁄2 4.11 1.125 .053 .141 .210 .2813⁄4 2 5.53 1.500 .070 .188 .500 .500

a

a lb/ft Area I S1⁄2 .72 .196 .003 .0125⁄8 1.13 .307 .008 .0243⁄4 1.63 .442 .016 .0417⁄8 2.22 .601 .290 .0661 2.89 .785 .049 .09811⁄4 4.52 1.227 .120 .19211⁄2 6.51 1.767 .249 .33115⁄8 7.50 2.074 .342 .4212* 11.57 3.142 .785 .7853** 26.10 7.069 3.974 2.64931⁄2† 35.00 9.621 7.362 4.209

* 12' lengths ** 10' lengths

† 8' lengths

ROUND BARS16' lengths,except as noted

121





NICKEL-SILVER

b

a

a b lb/ft Area I S1⁄2 1⁄2 .92 .250 .005 .0213⁄4 3⁄4 2.08 .563 .026 .0701 1 3.69 1.000 .083 .16711⁄4 11⁄4 5.76 1.563 .204 .32611⁄2** 11⁄2 8.28 2.250 .422 .563

** 10' lengths

SQUARE BARSSharp Corners16' lengths, except as noted

b Thickness53⁄8 18ga8 18ga

19 18ga

Major Axis Minor Axislb/ft Area Ix Sx Iy Sy

5288 Nickel-Silver 1.56 .426 .011 .044 .152 .152

b

a

t

a b t lb/ft Area I S3⁄4 3⁄4 .093 .90 .244 .018 .0481 1 .100 1.32 .360 .049 .09811⁄4 11⁄4 .100 1.70 .460 .102 .16311⁄2 11⁄2 .100 2.07 .560 .184 .2452 2 .100 2.83 .760 .458 .459

SquareSharp Corners16' lengths

t

OD

Round16' lengths, except as noted

a b t lb/ft Area Ix Sx Cx Iy Sy Cy3⁄4 11⁄2 .100 1.50 .410 .035 .093 .110 .1471 2 .100 2.07 .560 .090 .180 .278 .27811⁄2 3 .125 3.88 1.022 .384 .512 1.167 .77813⁄4 3 .125 4.15 1.125 .566 .647 1.338 .89213⁄4 4 .125 5.28 1.375 .732 .836 2.742 1.37123⁄4 11⁄4 .125 3.40 .930 .237 .379 .625 .851 .619 1.375

Item No.1334 Rounded Cornersb

a

t

TUBINGRectangularSharp Corners, except as noted16' lengths, except as noted

Oval 20' lengths

2"

.100

"

x

y

1 ⁄2"

b

122

NICKEL-SILVER C79800

NICKEL-SILVER SHEETSatin Finish and masked one side7' lengths, Alloy C78200

OD t lb/ft Area I S11⁄2* .100 1.75 .440 .108 .1441.900* .109 2.25 .721 .641 .24721⁄2 .125 3.44 .933 .659 .5273 .125 4.50 1.129 1.169 .779

* 20' lengths Item No. 5289





ENGINEERING DATA

ALUMINUM NICKEL-SILVER STEEL


123

Availability of complete structural information enables architects anddesigners to make proper use of Blum’s component systems to pro-vide safe, durable handrail installations. The designer can engineerinstallations to conform to specific building code loading criteria or canestablish design requirements for a given installation on the basis ofanticipated traffic exposure.

The five major considerations for the structural design of handrails are:1. Structural loading criteria as established by governing building

codes or special design requirements.2. Properties of railing materials and allowable stresses for design.3. Elements of sections for railing components.4. Load, stress, and deflection relationships expressed as formulas for

engineering design.5. Proper attachment and sound supporting structure.

CODE REQUIREMENTS AND REGULATIONSStructural requirements for railings usually are expressed in one of twoways, depending on governing codes and regulations. Some of thesespecify an applied loading distributed uniformly along the rail while oth-ers specify loading concentrated on the top rail. The designer shouldconsult governing codes, local ordinances, project specifications, andregulatory authorities to determine requirements for compliance.

The Americans with Disabilities Act (ADA): Refer to page iii forinformation regarding handrail dimensions mentioned in the ADAAccessibility Guidelines and ANSI 117.1-2004.

ALLOWABLE STRESSES To provide adequate safety factors, the engineering profession assignsto each material an allowable design stress which is usually expressedas a specific fraction of minimum yield, or sometimes as a smaller frac-tion of minimum ultimate strength. Allowable stresses vary with thecomposition and temper of the material and also, to some degree, withthe kind of shape and the direction of stress.

Yield strength is the point of stress (in pounds per square inch) atwhich material fails to return to its original position after the stress hasbeen removed and takes a permanent set. Minimum yield is defined asthe test value exceeded by 99% of a large number of specimens. Fornon-ferrous metals, the yield point is arbitrarily defined as the point ofstress at which permanent set is a specific fraction of 1% of the lengthof the test piece (0.2% offset as shown below or 0.5% elongation).Ultimate strength is considerably higher (see graph).

ELEMENTS OF SECTIONSProperties of sections of JB® handrail mouldings, posts, and supportsections are listed on page 124. For properties of bars, shapes, andtubes, see pages 105-122.

Allowable Stress

STRAIN (inches/inch)

MinimumYield

TypicalYield

MinimumUltimate

TypicalUltimate

ST

RE

SS

(lb

/sq

in)

0.2% OFGAUGE LENGTH

h

h1

L

h

FV FH

P

w

h1

MECHANICAL PROPERTIES OF MATERIALS Below is a table of metals used in the architectural componentsdescribed in this catalog, together with their yields, allowable stresses,and moduli of elasticity. These mechanical properties have beenestablished by producers of the various materials.

Allowable Expected Modulus ofBending Stress Minimum Elasticity

Material for Design (psi) Yield (psi) (psi x 106)

Aluminum 6061-T6, shapes major axis 19,500 35,000 10.0 shapes minor axis 27,700 35,000 10.0Aluminum 6063-T6, shapes major axis 15,200 25,000 10.0 shapes minor axis 19,700 25,000 10.0Aluminum 6063-T52, bars and shapes 12,600 16,000 10.0Aluminum 6063-T52, tubing 11,300 16,000 10.0Aluminum 6063-T832, drawn pipe 24,800 35,000 10.0Bronze C38500, extruded 9,700 16,000 14.0Bronze C38500, handrail moulding and tubing 14,500 24,000 14.0Bronze C38500, rectangular tubing, bars and shapes 21,200 35,000 14.0Red Brass C23000, drawn pipe, ASTM B43 11,000 18,000 17.0Nickel-Silver C79800, extruded 24,000 40,000 18.0Stainless Steel type 304, extruded, ASTM A276 15,000 25,000 28.0Stainless Steel type 304, hot-rolled, ASTM A276 18,000 30,000 28.0Stainless Steel type 304, cold-formed 15,100 28,000 28.0Stainless Steel type 304 round tubing(as welded) 30,000 55,000 28.0Carbon Steel C1010, roll-formed, ASTM A29 16,800 28,000 29.0Carbon Steel C1010, hot-rolled, ASTM A29 16,800 28,000 29.0Acrylic/Wood 3,760 4,975 1.8

LOADING DIAGRAM

EXPLANATION OF SYMBOLSw* = Uniform horizontal loading, perpendicular to the rail (lb/ft).L = Span between centerlines of posts or brackets (in).P = Horizontal force, perpendicular to rail applied at top of post (lb).FH = Horizontal force, perpendicular to rail at any point along the railing (lb).FV = Vertical force, perpendicular to rail at any point between posts (lb).h = Height of post. Distance from point of load application above top of

attachment (in).h1 = Distance from top of post attachment to top of reinforcing insert (in).Sx & Sy = Section modulus about the x- or y-axis respectively (in3).lx & ly = Moment of inertia about the x- or y-axis respectively (in4).k = Stiffness of member.C = Distance from the neutral axis to the extreme fiber of any section (in).E = Modulus of elasticity (psi x 106).R = Stiffness ratio.Pf = Load proportion factor.Fr = Reaction Factor.* Values for w (uniform load in lb/ft) are converted to lb/in by dividing by 12.




HANDRAIL AND POST PROPERTIES — ELEMENTS OF SECTIONSJuliusBlum&Co.Inc.




x

y

HANDRAIL Minor Axis Major Axis Shape Area Ix Sx Cx Iy Sy Cy

4488† 0.284 0.011 0.046 0.250 0.107 0.107 1.000 6501 1.054 0.017 0.067 0.256 0.629 0.457 1.375 6502 0.740 0.008 0.033 0.235 0.314 0.280 1.1256503 0.739 0.014 0.050 0.341 0.126 0.168 0.7506511† 0.386 0.006 0.031 0.238 0.189 0.137 1.375 6512† 0.291 0.008 0.034 0.236 0.136 0.121 1.125 4416 0.927 0.021 0.073 0.291 0.232 0.231 1.000 4428 0.569 0.017 0.041 0.416 0.209 0.215 0.969 4429 0.403 0.008 0.022 0.375 0.104 0.119 0.875 4435 0.746 0.018 0.044 0.406 0.349 0.328 1.062 4441 0.594 0.024 0.055 0.432 0.291 0.258 1.125 4529 0.684 0.059 0.100 0.586 0.616 0.429 1.438 4530 5530 0.779 0.023 0.052 0.449 0.300 0.267 1.125 4531 0.527 0.011 0.030 0.358 0.108 0.133 0.8134532 0.557 0.018 0.042 0.425 0.260 0.231 1.125 4533 0.937 0.457 0.372 1.229 0.785 0.571 0.9164534 5534 0.669 0.017 0.040 0.427 0.208 0.214 0.969 4535 5235 0.799 0.024 0.052 0.454 0.344 0.323 1.063 4536 0.434 0.017 0.040 0.423 0.171 0.176 0.969 4537 0.359 0.010 0.028 0.346 0.095 0.116 0.813 4538 5538 0.806 0.194 0.202 0.958 0.661 0.481 1.375 4539 0.670 0.013 0.035 0.369 0.175 0.200 0.875 4572 5572 0.701 0.008 0.032 0.239 0.299 0.266 1.125 4573 1.054 0.016 0.059 0.268 0.654 0.476 1.375 4574 5274 0.919 0.020 0.053 0.376 0.654 0.476 1.375 4575 0.645 0.014 0.033 0.437 0.232 0.232 1.000 6488† 5288† 0.426 0.011 0.044 0.250 0.152 0.152 1.000 6489† 5289† 0.440 0.108 0.144 1.250 0.108 0.144 1.250 6402 1.250 0.083 0.098 0.845 0.412 0.347 1.188 6407 1.680 0.088 0.104 0.844 1.311 0.807 1.625 6436† 0.741 0.159 0.268 0.594 0.422 0.386 1.094 6437† 0.879 0.210 0.336 0.625 0.799 0.532 1.5006530 0.810 0.032 0.082 0.395 0.315 0.315 1.000 6531 0.573 0.023 0.056 0.411 0.132 0.175 0.750 6532 1.090 0.039 0.084 0.465 0.616 0.493 1.250 6540 0.628 0.312 0.284 1.099 0.034 0.068 0.500 6901 1.387 0.042 0.106 0.396 0.709 0.540 1.313 6902 1.227 0.034 0.084 0.409 0.520 0.438 1.188 6903 0.361 0.013 0.029 0.448 0.109 0.125 0.875 6904 0.726 0.072 0.118 0.612 0.519 0.377 1.375 6905 1.414 0.026 0.089 0.297 1.167 0.718 1.625 6906 2.051 0.058 0.161 0.358 2.195 1.171 1.845 6907 1.441 0.031 0.077 0.402 1.263 0.777 1.625 6929 0.557 0.018 0.042 0.425 0.260 0.231 1.125 6930 0.779 0.023 0.052 0.449 0.300 0.267 1.125 6931 0.527 0.011 0.030 0.358 0.108 0.133 0.813 6932 0.684 0.059 0.100 0.586 0.616 0.429 1.438 6933 0.670 0.013 0.035 0.369 0.175 0.200 0.875 6934 0.669 0.017 0.040 0.427 0.208 0.214 0.969 6935 0.843 0.024 0.053 0.451 0.343 0.323 1.065 6939 1.845 0.085 0.225 0.375 0.932 0.746 1.250 6984 1.079 0.021 0.056 0.367 0.676 0.492 1.375 6985 0.805 0.017 0.040 0.413 0.254 0.254 1.000 6986 2.237 0.104 0.277 0.375 1.658 1.106 1.500 6987 0.746 0.056 0.084 0.662 0.648 0.471 1.375 6988 0.946 0.019 0.075 0.250 0.285 0.285 1.000 8521/22/23 8.924 1.967 2.420 0.812 22.530 8.190 2.750 8542 5.238 1.192 1.362 0.875 5.040 3.250 1.550 8561/62 12.170 2.680 3.298 0.812 56.940 15.184 3.750 8571 1.563 0.135 0.154 0.875 1.487 0.820 1.8138591 8.415 1.729 2.128 0.812 21.701 8.070 2.869

† Tubing

Minor Axis Major Axis Shape Area Ix Sx Cx Iy Sy Cy

230† 0.308 0.050 0.100 0.500 0.095 0.126 0.750 233B(294)* †† 1.021 0.052 0.133 0.390 0.146 0.223 0.655 283(295)* †† 1.412 0.072 0.184 0.390 0.385 0.426 0.905280† 0.373 0.064 0.128 0.500 0.193 0.193 1.000436E†† 0.655 0.029 0.078 0.370 0.087 0.140 0.622 4830(830)† 0.726 0.096 0.192 0.500 0.241 0.297 0.813 6423(423) 1.555 0.201 0.321 0.625 0.201 0.321 0.6256424(424) 3.430 0.445 0.712 0.625 2.153 1.566 1.3756427(427) 1.926 0.208 0.303 0.687 0.496 0.409 0.789 6430(430)† 0.726 0.096 0.192 0.500 0.241 0.297 0.8136434† 1334†0.930 0.237 0.379 0.625 0.851 0.619 1.3756435† †† 0.871 0.210 0.337 0.625 0.710 0.516 1.3756458(458)† †† 1.110 0.177 0.258 0.687 0.529 0.508 1.042 6459(459)† †† 1.030 0.201 0.322 0.687 0.708 0.679 1.041 8571* 1.563 0.135 0.154 0.875 1.487 0.820 1.873

* Aluminum, for use with stainless steel posts † Tubing ††T6 temper

HANDRAILS

x

y

CARLSTADT® POSTS

x

y

x

y

x

y

x

y

Minor Axis Major AxisRailing Number Area Ix Sx Cx Iy Sy Cy

1130 0.874 0.227 0.236 0.962 0.295 0.311 0.9501132 1232 1.245 0.632 0.500 1.263 0.717 0.574 1.250 1133 2.414 0.416 0.583 0.714 0.970 0.619 1.566 1134 1.980 0.296 0.300 0.988 1.022 0.817 1.250 1135 1.632 1.910 1.030 1.855 1.947 1.113 1.750 1136 2.250 1.488 1.488 1.000 9.196 2.821 3.260 1154 1.442 1.105 0.721 1.532 1.268 0.845 1.500 1155 1.638 1.875 1.024 1.831 1.989 1.136 1.750 1430 0.501 0.142 0.154 0.927 0.183 0.192 0.950 1432 1452 0.643 0.358 0.280 1.280 0.395 0.316 1.250 1433 1453 0.712 0.630 0.386 1.632 0.643 0.429 1.500 1472 1473 0.909 1.570 0.867 1.811 1.520 0.762 2.000 1230 0.766 0.202 0.223 0.907 0.278 0.292 0.950 1231 0.980 0.518 0.409 1.177 0.585 0.468 1.250 1233 1333 1.442 1.160 0.743 1.568 1.229 0.819 1.500 1235 2.360 2.704 1.471 1.838 2.772 1.584 1.750 1330 0.840 0.236 0.262 0.901 0.324 0.340 0.9501332 1.245 0.632 0.500 1.263 0.717 0.574 1.250 8662 11.062 3.954 3.954 1.000 30.152 9.420 3.201 1141 4.353 6.068 4.106 1.478 2.314 1.851 1.250 1142 6.828 10.206 5.449 1.873 5.121 4.097 1.250 1143 7.199 12.497 6.598 1.894 6.735 4.898 1.375

Unless designated as T6 temper, all aluminum alloy is in the T52 temper.The values of these elements of sections are approximate and—while theyhave been ascertained with care—they cannot be guaranteed.See p. 129 for properties of Connectorail® pipe and reinforcing bars.

GLASS RAILING SECTIONS


BENDING MOMENTS AND STRESSESDetermination of bending moments and stress in structural railingmembers follows conventional engineering design procedures. Theresisting moment—calculated from the Section Modulus (S, whichequals I/C) and Allowable Design Stress (fs)—must equal the AppliedBending Moment (M).

This translates into railing formulas as described below.RAILS: Connections between posts and rails are assumed to be freeto pivot. Distribution of loads through multiple spans decreases maxi-mum bending moment in horizontal members. The effect of differentnumbers of spans may be taken into account by varying the BendingMoment Constant (K). Calculation of Unit Stress (f) and Length ofSpan (L) are accomplished by using the following formulas:

1. For uniform vertical or horizontal loads (w):

2. For concentrated loads (F) applied at mid span:

Note: Values of K are defined based on the maximum bending moment developedunder various numbers of spans.

POSTS: Posts act as vertical cantilever beams in resisting horizontalthrust applied at the top rail. Bending moment produced by horizontalthrust normally controls design and post spacing may be calculatedusing the following equations.1. For uniform horizontal loading (w):

2. For concentrated horizontal loading (Fh):When concentrated loading is specified, the horizontal load on the toprail is distributed among several posts adjacent to the point of loading.The load distribution is a function of the relative stiffness of post andtop rail and of the number of spans in the railing. For a straight run ofrailing it may be calculated with the aid of the graph on page 130. Thiscalculation will show what proportion (Pf) of the total load any one postmay have to sustain. To the extent that it is less than 100%, it will jus-tify the use of lighter and more economical construction. The followingequation applies:

ENGINEERING DATA — RAILING FORMULAS


INTERNALLY REINFORCED POSTSThe load-carrying capacity of a post with reinforcing insert is limited bythe allowable fibre stress at one of three points.1. The post at the top of the insert, above which it is not reinforced.2. The insert at its base, at the highest point of its attachment to the supporting structure.3. The post at the same point of attachment.The lowest of these three loading limits controls design for the com-bined post and reinforcing insert.

1. Post at top of insert:

At the point of contact between the railing post and the reinforcinginsert, the deflection of each is assumed to be the same but the resist-ing force of each is a function of its Moment of Inertia (I) and Modulus of Elasticity (E). The resultant combined Reaction Factor(Fr) at the top of the insert is determined as follows:

Er and Ir refer to the reinforcing insertEp and Ip refer to the post

The loading limits for points 2 and 3 are then determined as follows:

2. Insert at base:

Moment in insert: M = P × (h − h1)

Fibre stress in insert:

f = MSr

= P ×Fr × h1

Sr

Loading limit: P =fs × Sr

Fr × h1

125

K = 8 for one or two spansK = 9.5 for three or more

spans of a continuous rail

M = S × fM = w 12 × L2

K

f = w 12 × L2

S × K

L = f × K × Sw

12

M = S × fM = F × LK

f = F × LS × K

L = S × K × fF

IC

× fs = S × fs = M

M = P × h P = w 12 × L M = S × f

f = w 12 × L × hS

L = S × fw 12 × h

M = P × h P = Fh ×Pf

f =Fh × h ×Pf

S

Moment in post (top of insert): M = P × h − h1( )Fibre stress in post (top of insert):

f = MS

=P × h − h1( )

S

Loading limit: P =fs × Sh − h1

Fr = h2 × h1

− 0.167

+Ep × Ip

3 ×Er × Ir+ 0.333

Insert

Floor

Point ofattachment

h

h 1

P

K = 4 for one spanK = 5 for two or more spans

of a continuous rail

÷


ENGINEERING DATA — RAILING FORMULASJuliusBlum&Co.Inc.


3. Post at base:Moment in post:

Fibre stress in post:

Loading limit:

126

f =MSp

=P × h − Fr × h1( )[ ]

Sp

P =fs × Sp

h − Fr × h1( )

COMBINED HANDRAIL SECTIONSWhen two sections of the same metal are combined by being fastenedtogether to form a handrail (e.g. a steel moulding mounted on a steelchannel), the sections develop the same deflection under load but actindependently about their respective neutral axes.

Ia and lb are the moments of inertia of the two sections. Since theSection Modulus (S) equals I ⁄C, the combined value for S of the twosections would be:

In the railing formulas, substitute the above equation for the valueof S whenever combined sections of the same material are used.

COMBINED SECTIONS OF DISSIMILAR MATERIALSTo compute the loading of combined sections of dissimilar materials(e.g. a bronze handrail mounted on a steel channel) calculations involvethe determination of the relative portion of the load carried by eachsection. The load distribution is a function of the relative stiffness of thetwo sections, which is determined by the Moments of Inertia (I) andtheir Moduli of Elasticity (E). The distribution of the total load betweentwo sections is determined as follows:

Individual calculation to determine the fibre stress for each mater-ial, using the load portion of each section, will then determine whichsection controls design; namely, the section giving the lesser result(see example 6 on page 128).

DEFLECTION CONSIDERATIONSExcessive deflection of a railing under load, even though it meetsstrength requirements, will give the user a feeling of insecurity and maycause tripping or stumbling.

Lateral deflection of posts or vertical deflection of horizontal railsunder load are computed as follows—these formulas must beused with caution:

For posts without reinforcing insert:

For posts with reinforcing insert of similar or dissimilar material:

Where Ep and Ip apply to postEr and Ir apply to reinforcing insert

For rails (concentrated load, F):

where K = 48 for simple span66 for two or more spans, load on end span87 for three or more spans, load on intermediate span

For rails (uniform load, w):

There are few, if any, regulations or code requirements limiting deflec-tion in a railing but ASTM has put forth the following criteria regardingMaximum Allowable Deflection (∆max) in their specification E985.

For horizontal load at midspan:

For horizontal load at top of post:

For vertical load at midspan:

In many instances, the anchorage of the railing to the floor, tread or fascia is subject to a degree of rotation which will add an indeterminateamount to the deflection on the post and rail. Anchorage and sup-porting structure must be as secure and rigid as possible.

∆max = L 96

∆max = h 12

∆max = h 24 + L 96

∆ = 5 × w 12 × L4

384 ×E × I for simple spans

∆ =w 12 × L4

145 ×E × I for two or more spans

∆ = F × L3

K ×E × I

∆ =P × h − h1( )3

3 ×Ep × Ip+

P × h3 − h − h1( )3[ ]3 × Ep × Ip( ) + Er × Ir( )[ ]

∆ = P × h3

3 ×E × I or

w 12 × L × h3

3 ×E × I

A

B

cxa

cxbxb

xa

y

y

Steel handrail withsteel channel

(Cmax is either Ca or Cb,whichever is greater)

S=Ia + IbCmax

Load Carried by A = Total Load

1+Eb × IbEa × Ia

Load Carried by B = Total Load − Total Load Carried by A

M = P × h − Fr × h1( )[ ]


ENGINEERING DATA — EXAMPLE PROBLEMS AND SOLUTIONS


These sample problems demonstrate how engineering data providedby Julius Blum & Co. Inc. can be used to obtain solutions to practi-cal handrail design problems. Problems are solved by equating themaximum bending moment resulting from applied loading to theresisting moment determined from geometrical section properties andallowable stress. This method can be used to obtain solutions for mostinstallation and loading conditions.

EXAMPLE 1: DETERMINE MAXIMUM POST SPACINGREQUIREMENTS:

Uniform load, w = 50 lb./ft.Railing height, h = 38 in.

MATERIAL SPECIFIED:Post: #423 aluminum, 6063-T52Allowable stress, fs = 12,600 psi (refer to page 123); Section modulus, S = .321 in3 (refer to page 124).

DETERMINE:Maximum post spacing (simple span), L (in) Resisting bending moment, M(resisting) = fs × S Applied bending moment, M(applied) = w/12 × L × hM(resisting) must equal M(applied)

EXAMPLE 2: DETERMINE REQUIRED SECTION MODULUS OF POSTREQUIREMENTS:

Concentrated load, F = 200 lbs.Railing height, h = 42 in.

MATERIAL SPECIFIED:Post: Steel tubingallowable stress, fs = 16,800 psi (refer to page 123).

DETERMINE:Section modulus, S, and select a suitable sectionResisting bending moment, M(resisting) = fs × S Applied bending moment, M(applied) = F × hM(resisting) must equal M(applied)

fs × S = F × h

S = F × hfs

S = 200 × 4216,800

S = 0.500 in3

fs × S = w / 12 × L × h

L =fs × S

w 12 × h

L = 12,600 × .32150 12 × 38

L = 25.60 in

EXAMPLE 3: DETERMINE MAXIMUM SPAN FOR HANDRAIL MOULDINGS,CONCENTRATED LOADREQUIREMENTS:

Concentrated load, F = 200 lbs.MATERIAL SPECIFIED:

Handrail moulding: #6489, 11⁄2" O.D. bronze tubingfs = 14,500 psi; Sx = .144 in3

The railing will be installed with more than two consecutive spans,therefore the Bending Moment Constant, K = 5 (refer to page 125).

DETERMINE:Maximum span for handrail moulding, L (in)

EXAMPLE 4: DETERMINE MAXIMUM SPAN FOR A COMBINED HANDRAILSECTION USING SECTIONS OF THE SAME METALREQUIREMENTS:

Concentrated load, F = 200 lbs.MATERIALS SPECIFIED:

Handrail moulding: #6932, aluminum, 6063-T52fs = 12,600 psi; Ixa = .059 in4; Cxa = .586 inSupport channel: 2" × 1⁄2" × 1⁄8" aluminum channelfs = 12,600 psi; Ixb = .006 in4; Cxb = .369 inCmax = .586 in (greater of Cxa vs. Cxb)

The railing will be installed with more than two consecutive spans,therefore the Bending Moment Constant, K = 5 (refer to page 125).

DETERMINE:Maximum span for combined handrail section, L (in)

Resisting bending moment, M(resisting) = fs ×Ixa + Ixb

Cmax

Applied bending moment, M(applied) = F × LK

M(resisting) must equal M(applied)

fs ×Ixa + Ixb

Cmax

= F × LK

L =fs × Ixa + Ixb( ) × K

F × Cmax

L =12,600 × .059 + .006( ) × 5.0

200 × .586= 35 in

Resisting bending moment, M(resisting) = fs × S

Applied bending moment, M(applied) = F × LK

M(resisting) must equal M(applied)

fs × S = F × LK

L =fs × S × K

F

L = 14,500 × .144 × 5.0200

= 52.2 in


EXAMPLE 5: CONCENTRATED LOADLOAD DISTRIBUTION AMONG POSTSDESCRIPTION:Railing for an air terminal publicarea—heavy pedestrian traffic isexpected. REQUIREMENTS: Loading, F = 300 lbs. Railing height = 42" at platforms;34" at stairs Post height, h: Posts are fasciamounted; top of post attachment is2" below walking surface. Thereforepost height is railing height plus 2". Maximum opening to be no morethan 4"; 12 or more spans between posts.MATERIALS SPECIFIED:

Handrail moulding: #6901, aluminum 6063-T52 fs = 9,700 psi; E = 10 × 106; Iy = .709 in4; Sy = .540 in3

Intermediate posts: #430, aluminum 6063-T6fs = 15,200 psi; E = 10 × 106; Ix = .241 in4; Sx = .297 in3

End posts: 21⁄2" × 21⁄2" × 3⁄16" square aluminum – 6061-T6 – tubingfs = 19,500 psi; E = 10 × 106; S = 1.247 in3

DETERMINE:Structural compliance of proposed construction.1. Stress at base of end posts (end posts are dissimilar from inter-

mediate posts—they have to resist 100% of horizontal load):

(19,500 psi allowable)2. Stress at base of intermediate posts at platform

(L= 4 in, h = 44 in.): A. Stiffness ratio:

B. Load proportion factor: (see graph, p. 130) = .230C. Load per post: 300 × .230 = 69 lb. D. Stress at base of post:

(15,200 psi allowable)3. Stress at base of intermediate post at stairs

(L= 4 in, h = 36 in.): A. Stiffness ratio:

B. Load proportion factor: (see graph, p. 130) = .238 C. Load per post: 300 × .238 = 73.5 lb.D. Stress at base of post:

(15,200 psi allowable)4. Stress on handrail at mid-span:

(9,700 psi allowable)Railing meets structural designer’s requirements.

f =Fh × LS × K

= 300 × 4.540 × 5

= 444 psi

f = P × hS

= 73.5 × 36.297

= 8,909 psi

R = Er × IrL

÷Ep × Ip

h= .709 × 36

4 × .241= 26.47

f =P× h

S=

69 × 44.297

= 10, 222 psi

R = Er ×IrL

÷Ep ×Ip

h= .709 × 44

4 × .241= 32.36

f = P × hS

= 300 × 441.247

= 10,585 psi

ENGINEERING DATA — EXAMPLE PROBLEMS AND SOLUTIONSJuliusBlum&Co.Inc.


EXAMPLE 6: UNIFORMLY DISTRIBUTED LOADCOMBINED HANDRAIL SECTION OF DISSIMILAR MATERIALSDESCRIPTION:Stair railing of steel balusters,mounted between steel channel topand bottom rails, attached to squaresteel posts, with a bronze handrail.REQUIREMENTS:Loading, w = 50 lb./ft., horizontaland vertical.Railing height, h = 34" at stair, 42" at landings.Post spacing, L = 40"; 3 ormore spans in each run.MATERIALS SPECIFIED:

Handrail moulding: #4530, bronze C38500fs = 9,700 psi; Ix = .023 in4; Cx = .444 in.; E = 14 × 106 psi Posts: 11⁄2" × 11⁄2" × .140" structural steel tubingfs = 27,700 psi; S = .316 in3

Sub-rails: 11⁄2" × 1⁄2" × 1⁄8" steel (C1010) channel — top and bottom:fs = 16,800 psi; Ix = .005 in4; Cx = .250 in.; E = 29 × 106 psi

DETERMINE:Structural compliance of proposed construction1. Stress at base of post:

(27,700 psi allowable)2. Stress on rail:

Since ly of both bronze(b) and steel(s) sections is greater than Ix,vertical load controls design. A. Total load:

B. Load per foot on bronze, wb:

C. Load per foot on steel, ws:

D. Stress on bronze, fsb:

E. Stress on steel, fss:

Design meets code structural requirements.Note: Resistance to vertical loading of upper and lower steel channels is additive.Therefore the value of Ixs is doubled. The additional resistance to vertical load by the truss action of the balusters has not been considered, making the result of thecalculation more conservative.

fss =ws 12 ×L2 ×Cmax

Ixs × K=

23.6912 × 402 × .444

2 × .005 × 9.5

= 14, 763 psi 16,800 psi allowable( )

fsb =wb 12 × L2 × Cmax

Ixb × K=

26.3112 × 402 × .444

.023 × 9.5

= 7,128 psi 9,700 psi allowable( )

ws = w − wb

ws = 50 − 26.31 = 23.69 lb ft

wb = w ÷ 1+Es × 2 × Ixs

Eb × Ixb

wb = 50 ÷ 1+ 29 × 106 × 2 × .005

14 × 106 × .023

= 26.31 lb ft

w 12 × L = 50 × 4012

= 167 lb

MS

= w 12 × L × hS

At stairs:

At landings:

50 × 40 × 3412 × .316

= 17,932 psi

50 × 40 × 4212 × .316

= 22,152 psi


129

ENGINEERING DATA — CONNECTORAIL® SYSTEM DATA


MECHANICAL PROPERTIES Modulus of Allowable Minimum Elasticity Material Stress (psi) Yield (psi) (psi × 106) Aluminum*

6061-T6 19,500 35,000 10.0 6063-T52 pipe 11,300 16,000 10.0 6063-T832 pipe 24,800 35,000 10.0 Red Brass C23000 11,000 18,000 17.0 Stainless• Type 304 30,000 55,000 28.0

* Aluminum Association Specifications for Aluminum Structures.• American Iron & Steel Institute Stainless Steel Cold-Formed Structural Design Manual.

SECTION PROPERTIESConnectorail® Pipe (Aluminum, Bronze, Stainless)Nominal Size Sched. OD Wall Area I S 1¼" 10 1.660" .109" .531 .161 .193 1¼" 40 1.660" .140" .669 .195 .235 1¼" 40 1.660" .146" .695 .201 .242 1½" 5 1.900" .062" .375 .158 .166 1½" 10 1.900" .109" .614 .247 .260 1½" 40 1.900" .145" .800 .310 .326 1½" 40 1.900" .150" .825 .318 .335 Connectorail® Reinforcing Bars (6061-T6) Nominal No. Sched. Size OD Area I S 7192 10 1¼" 1.427" 1.599 .204 .285 7292/7295 10 1½" 1.667" 2.183 .379 .455 7492 40 1¼" 1.328" 1.452 .168 .247 7592/7595 40 1½" 1.585" 1.973 .310 .391 9392** 5 1½" 1.750" .615 .205 .239

** Tubing with .120" wall, type 304 Stainless Steel

CONNECTORAIL® TEST RESULTS1½" Aluminum and Stainless Steel Pipe—Single Span

NOTE ON WELDED PIPE RAILINGSAn important consideration for welded pipe railings is the effect of welding heat on the structural properties of aluminum handrail pipe. For example, extruded pipe of aluminum alloy 6063-T52 has an allow-able design stress of 11,300 psi. After welding, the allowable stress must be reduced to 8,000 psi within 1" of the weld. Since maximum bending moment generally occurs at points of support or attachment, the reduced stress will often control design. This consideration does not apply to non-welded Connectorail®.

LOADING TABLESThe values tabulated in the following page apply to installations fabricated and erected in accordance with Connectorail® speci-fications and using Connectorail® components exclusively. Chart values have been determined by assuming that reinforcing inserts are included with fascia mounted railings and with railings set into the floor, except where no insert is indicated.

For these tables, various post heights have been selected arbitrarily. Values of maximum post spacing for other post heights can be inter-polated easily.

When Connectorail® posts are surface mounted on floors, treads or stringers, using a floor flange, the entire bending moment of the post is transferred to the reinforcing insert and the allowable post loading has to be computed accordingly. The allowable load will be determined by the resisting moment of the reinforcing insert alone or the unreinforced post above the insert (h – h1), whichever is less.

.344"

.388"

.496"

.565"

.739"

1.368"

.000"

.000"

.000"

.000"

.047"

.488"

.547"

.669"

.845"

.998"

1.189"

1.654"

1.990"

.000"

.000"

.000"

.000"

.000"

.151"

.656"

1.466"

1.818"

2.214"

2.483"

2.984"

3.464"

4.510"

.000"

.000"

.000"

.000"

.000"

.047"

.406"

1.021"

1.317"

1.594"

1.882"

2.178"

2.488"

2.775"

3.080"

3.424"

3.754"

4.213"

.000"

.000"

.000"

.000"

.000"

.000"

.000"

.000"

.000"

.031"

.192"

.867"

1.120"

1.395"

1.728"

1.992"

2.563"

2.972"

4.176"

5.591"

.025"

.040"

.128"

.205"

.322"

.652"

.994"

1.726"

2.886"

1.389"

1.659"

1.926"

2.206"

2.601"

2.811"

3.122"

3.484"

3.860"

4.267"

.000"

.000"

.000"

.000"

.000"

.000"

.000"

.000"

.146"

.391"

1.724"

2.122"

2.537"

2.849"

3.211"

3.603"

4.278"

4.868"

.000"

.000"

.000"

.000"

.000"

.000"

.109"

.266"

1.006"

1.160"

1.369"

1.633"

2.131"

2.270"

2.765"

3.880"

.036"

.056"

.080"

.112"

.238"

.452"

430 lbs. 440 lbs. 470 lbs. 700 lbs. 350 lbs. 590 lbs. 490 lbs. 340 lbs.0.2% Specified Permanent set load

Defl

ectio

n

Per

man

ent

Set

Defl

ectio

n

Per

man

ent

Set

Defl

ectio

n

Per

man

ent

Set

Defl

ectio

n

Per

man

ent

Set

Defl

ectio

n

Per

man

ent

Set

Defl

ectio

n

Per

man

ent

Set

Defl

ectio

n

Per

man

ent

Set

Defl

ectio

n

Per

man

ent

Set

RAIL POST

Span (L) or Height (h) 57" 75" 96" 96" 96" 42" w/24" re-bar 42" w/24" re-bar 42" w/24" re-bar

Schedule 10 40 10 40 5 10 40 5

Alloy and Temper 6063-T52 6063-T52 6063-T832 6063-T832 Type 304 6063-T832 6063-T832 Type 304

Load (P)

200 lbs.

250 lbs.

300 lbs.

350 lbs.

400 lbs.

450 lbs.

500 lbs.

550 lbs.

600 lbs.

650 lbs.

700 lbs.

ALUMINUM STAINLESS

BRONZE

ENGINEERING DATAJuliusBlum&Co.Inc.


Maximum Allowable Spans—Handrail Based on bending stress in rail.Load: 50 lbs. per foot

1 or 2 spans 3 or more spansAluminum 6063-T52 11⁄4" Sch. 10 65" 71" 11⁄4" Sch. 40 71" 78"11⁄2" Sch. 10 75" 82" 11⁄2" Sch. 40 84" 92"

If it is desired to use longer rail spans than allowed by the limitsabove, alloy 6063-T832 pipe should be used. Allowable rail span for6063-T832 pipe is usually greater than allowable post spacing.

Bronze (Red Brass) C2300011⁄4" Sch. 40 70" 77" 11⁄2" Sch. 40 83" 90" Stainless Steel Type 30411⁄2" Sch. 5 98" 107"

CONNECTORAIL® LOAD TABLESMaximum Allowable Spans—Post Spacing Based on bending stress in post and insertLoad: 50 lbs. per foot, applied horizontally at top rail

Post Material Post No 15" insert 25" insert Pipe size height (h) insert h1 = 9" h1 = 12" h1 = 19"Aluminum 30" 38" 55" 64" 85"6063-T832 34" 34" 46" 52" 73" 11⁄4" Sch. 10 38" 30" 40" 44" 61"

42" 27" 35" 38" 50" 46" 25" 31" 34" 43"

Aluminum 30" 47" 67" 78" 89" 6063-T832 34" 41" 56" 64" 77" 11⁄4" Sch. 40 38" 37" 48" 54" 67"

42" 33" 42" 47" 59" 46" 30" 38" 41" 52"

Aluminum 30" 52" 74" 86" 126" 6063-T832 34" 46" 62" 70" 108" 11⁄2" Sch. 10 38" 41" 53" 60" 81"

42" 37" 47" 52" 67" 46" 34" 42" 46" 57"

Aluminum 30" 65" 92" 108" 131" 6063-T832 34" 57" 78" 88" 112" 11⁄2" Sch. 40 38" 51" 67" 75" 98"

42" 46" 59" 65" 84" 46" 42" 52" 57" 72"

Bronze (Red Brass) 30" 21" 30" 34" C23000 34" 18" 25" 31" 11⁄4" Sch. 40 38" 16" 21" 28"

42" 15" 19" 26" 46" 13" 17" 23"

Bronze (Red Brass) 30" 29" 41" 51" C23000 34" 25" 34" 46" 11⁄2" Sch. 40 38" 23" 30" 42"

42" 21" 26" 37" 46" 19" 23" 32"Post No 26" insert

height (h) insert h1 = 18" h1 = 20"Stainless Steel 30" 40" 83" 85" Type 304 34" 35" 71" 73" 11⁄2" Sch. 5 38" 32" 62" 64"

42" 29" 50" 54"46" 26" 43" 46"

ALUMINUM STAINLESS

BRONZE

The graph below is used to determine railing load distribution. It hasbeen determined by computer analysis and confirmed by laboratorytest. The formula used in determining the graph assumes that all postsare of identical material and section.

The Stiffness (k) of a rail or post is:

(see page 123 for definition of symbols)The Stiffness Ratio (R) is determined as:

The Stiffness Ratio is then plotted on the graph to obtain a LoadProportion Factor (Pf). When the load proportion factor has been deter-mined, it is multiplied by the total load to determine the load one postmust sustain.

If one or both ends of the railing are free standing, the end loadedcondition must be assumed. If both ends of the run are laterally bracedby a change in direction or attachment to a firm structure, the centerloaded load proportion factor may be used.

NOTE: If end posts differ from intermediate posts in strength, the load dis-tribution pattern becomes indeterminate and end posts should then be designedto carry 100% of the concentrated load. Intermediate posts may then bedesigned to the center loaded condition.

In single span railings, each post must be designed to carry the fullconcentrated load. When posts and rails are of identical material andsection (as in pipe railing), and post spacing varies between 3 and 6feet while post height is between 30 and 42 inches, load distribution isfairly uniform. In this situation, the greatest proportion of a concen-trated load carried by any post can be estimated as follows:

End posts: Intermediate posts:2 span railing Pf = 0.85 2 span railing Pf = 0.65 3 or more spans Pf = 0.82 3 or more spans Pf = 0.60Thus, if a 200 lb concentrated load is specified for a pipe railing,

actual design load to be applied at the top of the end post is .82 × 200lb (164 lb) while design load to be applied to intermediate posts is .60× 200 lb (120 lb). If railing posts are reinforced, the load proportion fac-tor for posts is about 3 percentage points higher.

R = kr

kp

kr = E × IL

for the rail

kp = E × Ih

for the post

LOAD DISTRIBUTION CONSIDERATIONS

0.1 1.00.5 5.0 10 50 100 500 1000

STIFFNESS RATIO (R) k rail⁄k post

0.2

0.1

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

LOA

D P

RO

PO

RT

ION

FA

CT

OR

(P

f)

A

B

C

D

EFG

H

M

JKL


131

3 614 6111 6112 6123L 4524L 4529 4429L 4530 4430L 4535 2753 6154 6163 83,87,94,10164 83,94,10172 4973 4974 4975 4875AB 2777 4880 48100CC 40,41100CL/CR 39100JL 38,39100JR 38,39104 66105 66123 44123L 45124 44124L 45125CC 40,41125CL/CR 39129L 45129 44130 44130L 45131 43132 43134 43137 44138 44139 44142 22,84,93142L 43143 22,84,93143L 43144 22,79,84,87,93145 22,79,84,93150CC 40,41150CL/CR 39150CL/CR/P 39150P 38151 83,87,91,101152 71,84,93153 46154 44158 46159 46160 82,87,95,101161 71,84,87,93162 71,84,93163 83,94,101164 83,87,94,101166 20,82,95,101167 82,95168 20,82,95,101169 82,95,101

170 11,88171 67,80,87,92172 67,80,92173 67,81,87,90174 67,81,90175 67,81,90176 11,21,89183 42184 42192 21,89193 88196 20,82,95,101198 42201 49202 49203 49204 49205 49206 49209 43210 25211 9,17,25,30214 25215F 27216F 27217 88218 21,89219 88220 21,89221 11,21,90222 20,87,92223 11,21,90224 ii,10,94225 26226 26227 71,73,75,77228 77229 77230 76,77,80,124231 77232 26233B 77,124234 46,48235 46236 46237 76238 76,80239 46240 10,94241 80,92242 11,21,90243 11,81,90244 48245 80,93246 80,93247 81,91248 81,91249 48250 48251 48252 48253 48254 48255 48256 48257 48258 26259 26260 48

261 48262 48263 48264 48265 49266 49267 48268 48269 48270 11,88271 11,81,90272 49273 49274 49275 11,21,87,89276 49277 28278 28279 76,80280 76,77,80,124281 49282 49283 77,124284 77285 76286 28287 28288 28289 28290 82,95,101292 28293 28294 76,124295 76,124296 20,82,87,95,101297 49298 20,82,95,101299 82,95,101301 49302 11,88304 11,88305 88306 87,89307 ii,11,21,81, 87,90,91308 11,21,81,90,91309 32,80,87,92312 32,80,92313 32,81,87,90,91314 32,81,90,91315 88316 21,89317 88318 21,89319 11,21,89321 11,21,87,90322 20,87,92323 44323L 45324 44324L 45325 44325DL 45325L 45326L 43327 44327DL 45327L 45328 44

328DL 45328L 45329 44329L 45330 44330L 45331 43331L 43332 43332L 43333 43334 44334L 45335 44336 44336L 45337 44337L 45338 44338L 45339 44339L 45340 43,48341 43342 49343 43343L 43344 49345L 43347 48347L 43348 49349 48350 49351 49352 48353 48354 48355 48356 48357 48358 44359 48360 48361 48362 48363 48365 49366 49367 48368 48369 48370 11,87,88371 11,88372 67,88375 11,21,89376 11,21,89377 88378 89381 88382 89383 88384 21,87,89385 88386 89387 88388 21,89389 11,21,89390 49

391 49393 49395 49396 49397 49398 49399 49400 49400CC 40,41400CL/CR 39401 37402 20,92402L 20,92403 11,21,90404 20,92405 11,21,90408 69,79411 9,17,25,30414 81,91415 81,91418 81,87,90419 81,90421 69422 69423 68,69,124,127424 68,69,78,124425 69425CC 40,41425CL/CR 39426 69427 68,69,124428 71,73,75,77429 71,73,75,77430 70,71,80, 84,93,124,128431 71432 70,72,7480433 71434 48435 70436E 70,72,74,124439 80,87,92440 80,92441 80,83,92,94442 80,92443 11,81,90444 11,81,90448 48449 48450CC 40,41450CL/CR 39451 75452 48453 75454 48455 48456 48458 72,73,80,124459 74,75,80,124462 67,80,93463 67,80,93464 67,81,91465 67,81,91467 48468 73469 73472 49473 49474 49

477 88478 21,87,89479 48480 48495 72496 74497 88498 21,89504 56510 59511 59512 59513 59514 47,59515 59515B 59516 60517 60518 60519 60520 57521 57522 47,57523 47,57524 57525 57526 57526-R 46527 57528 46529 46530 46530D 46531 46531D 46532 46,57532D 46533 46533D 46534 46535 49,54537 53538 53539 53540 53541 53542 56543 49,54544 49,54545 49,54546 49,54547 49,54548 59550 47,58551 58552 47,58555 59558 59559 54560 54561 54562 54563 54564 54565 54566 54567 54568 58569 58

PRODUCT INDEX


132

PRODUCT INDEX


570 58571 58572 47,58572-R 46573 58574 58576 57577 57578 57579 56580 57581 57582 57583 56584 47,60585 55586 58587 58588 58589 55590 56591 60592 60593 60594 60595 60596 54597 54598 54598-R 46599 54600CC 40,41600CL/CR 39601 29602 29604 27605 27606 28607 28608 28609 28610 25611 25612 25614 25615CC 40,41615CL/CR 39617 26618 26619 26620 26621 88622 89625 88626 89650CC 40,41650CL/CR 39664 27665 27701 29702 29705 27707 18,28708 18,28710 17,25,78,84711 9,17,25,30,78712 25714 25715 28

716 28717 48718 44719 48720 26723L 45724L 45727 17728 17730L 45731L 43739L 45740 46746 18,29747 18,29748 17749 17750 17752 48753 48754 48755 17756 17757 17758 17759 27760 48763 55765 49766 49767 48768 48769 48773 68774 68,78775 78776 49777 68782 / 783 19784 19786 18787 18788 18,29797 49800 36,64801 11,21,90802 20,92803 11,21,90807 18,28808 18,28810 17,25811 9,17,25,30824 10,94827 17828 17830 70,71,80,124831 71833 71835 70838 71839 71840 10,94841 80,92842 11,21,90843 11,81,87,90844 11,81,90862 80,93863 80,93864 81,91

865 81,91871 65872 65874 65875 65876 64,65,85877 65878 65879 65881 65882 65883 42884 42887 42888 42890 82,95,101891 88892 21,89893 88894 21,89896 20,82,95,101898 20,82,87,95,101899 82,95,101901 28902 28903 26904 26906 28907 28908 28909 28910 25911 25912 25913 25914 25915 26917 26918 26919 26920 26921 28922 28923 28924 28925 26926 26927 25928 25929 26930 26931 26932 26933 26934 26936 28937 28938 28939 28942 25943 25948 26949 26951 28952 28953 28954 28958 26959 26

960 55961 55962 55963 54964 54965 54967 54968 54969 54970 47971 47972 47973 46,47983 27984 27985 27986 27987 291021 881022 21,891026 21,891087 881088 891110 8,301111 81112 81113 81114 81115 81120 8,301122 8,301123 9,301125 9,301130 6,8,9,33,1241132 6,8,9,33,1241133 6,33,1241134 6,33,1241135 ii,6,8,9,33,1241136 6,8,33,1241137 6,8,9,331138 101139 101141 4,1241142 4,1241143 4,1241154 6,8,9,33,1241155 6,8,9,33,1241160 8,9,301161 101162 101163 8,9,301164 8,9,301170 8,9,301180 8,301181 8,301182 8,301186 81201 491202 491203 491204 491205 491206 491210 8,301211 81212 81213 81214 81220 8,30

1222 8,301223 9,301225 9,301230 6,8,9,34,1241232 6,8,9,34,1241233 6,8,9,34,1241235 6,8,9,34,1241264 8,9,301280 8,301281 8,301282 8,301283 8,301302 20,921303 11,21,901306 891315CC 40,411315CL/CR 391323 9,301325 9,301328 171330 7,8,9,35,1241330C 8,15,26,301330N 8,18,28,301332 7,8,9,35,1241332C 8,301332N 8,301333 7,8,9,35,1241333C 8,301333N 8,301334 35,78,122,1241334N 791340 141341 80,87,921343 11,81,901350CC 40,411350-CL/CR 391361 20,80,931362 80,931363 8,9,15,301364 81,911365 81,911366 80,931373 15,271374 781378 891382 891386 891400 271410 8,301411 81413 81414 81420 8,301423 9,301425 9,301430 6,8,9,37,1241432 6,8,9,37,1241433 6,8,9,37,1241452 6,8,9,37,1241453 6,8,9,37,1241463 8,9,301464 8,9,301472 6,8,9,37,1241473 6,8,9,37,1241473M 8,301473N 8,301474 8,9,301480 8,301482 8,30

1504 561508 561531 461542 561579 561583 561585 551589 551601 601603 601604 271605 271606 281607 281608 281609 281610 251611 251612 251614 251617 261618 261619 261622 87,891626 891653 601654 601664 271665 271922 281923 281960 551961 551962 551963 551970 471971 471972 471973 46,471983 421984 421988 422003 612012 612014 612015 612016 612017 612023 612453 602454 602515 612524 612528 612538 612553 602554 602611 612616 612640 612653 602654 602717 612719 612726 612855 612859 612861 612866 61

133

PRODUCT INDEX


2870 612932 612962 612982 613023 513024 513025 513033 513034 513041 513042 513043 513044 513045 513064 513073 513123 513124 513125 513126 513133 513134 513142 513143 513144 513145 513243 513277 513323 513523 513524 513525 513526 513541 513542 513543 513544 513545 513601 293602 293604 273605 273607 283608 284024 514302 1024416 37,1244428 37,38,40,51,1244428B 384428C 404428E 38,514428GL/GR 394428L 38,514428N 404428S 384428V 384429 37,38,39, 40,51,1244429B 384429C 404429E 38,514429F 39,414429F-3 414429F-4 414429F-5 414429F-6 414429GL/GR 394429L 38,514429N 40

4429S 384429SL 38,394429SR 38,394429T 39,514429U 39,41,514429UC 39,414429UL 39,414429V 384435 37,38,1244435V 384441 37,38,40, 51,1244441B 384441C 404441E 38,514441GL/GR 38,394441N 404441S 384441V 384445 374487 984488 37,40,100,119,1244488N 404503 344506 24,1024507 24,1024519 984520 984522 984523 984524 984526 994527 994528 994529 34,40,1244529C 404529N 404530 34,38,40, 51,124,1284530B 384530C 404530E 38,514530GL/GR 38,394530L 38,514530N 404530S 384530T 39,514530V 384531 34,38,40,51,1244531B 384531C 404531E 38,514531GL/GR 394531L 38,514531N 404531S 384531U 39,41,514531V 384532 34,38,40,51,1244533 6,34,1244534 34,38,40,51,1244534B 384534C 404534E 38,514534GL/GR 394534L 38,514534N 404534S 384534T 39,51

4534V 384535 34,38,40, 51,100,1244535B 384535C 404535GL/GR 394535N 404535S 384535T 39,514535V 384536 34,38,40,51,1244537 34,38,40,51,1244538 6,8,34,40,1244538N 8,404539 34,38,40, 100,1244539B 384539C 404539GL/GR 394539N 404539S 384539V 384550 974551 974552 974553 974553-Q 974554 974555 974556 974557 974558 974559 974560 994563 974564 974565 994566 974567 974569 974572 34,40,1244572C 404572N 404573 34,40,1244573C 404573N 404574 34,40,100,1244574C 404574N 404575 34,40,100,1244575C 404575N 404579 974589 974590 984596 984598 984599 974721 1204722 1204730 1204732 1204734 1204735 1204736 1204744 1204750 1204752 1204753 120

4754 1204759 1204760 1204830 70,71,1245120 505130 505132 505140 505142 505143 505152 505153 505162 505163 505164 505183 505184 50523535,38,40,100,1245235B 385235C 405235GL/GR 395235N 405235S 385235V 385264 20,82,95,1015274 35,40,100,1245274C 405274N 40528835,40,100,122,1245288N 405289 30,35,40, 100,122,1245289N 30,405320 505325 505330 505335 505340 505364 20,82,95,1015411 505415 505420 505440 505530 35,38,40,1245530B 385530C 405530GL/GR 38,395530N 405530S 385530V 385534 35,38,40,1245534B 385534C 405534GL/GR 395534N 405534S 385534V 385538 6,8,35,40,1245538N 8,405553 975558 975563 975564 975567 975569 975572 35,40,1245572C 405572N 405579 97

5589 975599 975615 505620 505625 505630 505632 505635 505640 505642 505643 505650 505652 505653 505660 505663 505664 505683 505684 505720 505730 505740 505763 505784 505820 505830 505840 505863 505864 505883 505884 505920 505925 505930 505933 505935 505940 505943 505944 505963 506102 1026105 1026121 1026130 1026138 1036140 1026201 606203 606402 32,40,83, 91,100,1246405 32,40,83,916407 32,40,83,91,124642333,68,69,112,1246424 33,68,69, 78,112,1246427 68,69,1246430 70,71,83,84, 93,94,1246431 556432 556433 556434 33,40,68,69, 78,79,100,112,1246434N 40,796435 33,40,78,80, 100,112,1246435N 40,796435C 406436 33,40,100,112,124

6436N 406437 33,40,84, 100,113,1246437N 406446 18,296458 72,73,1246459 74,75,1246473 1026474 1026488N 406488 34,40,100,107,1246489 34,40,100,107, 124,1276489C 30,406489D 306489N 30,406501 37,1246502 37,1246503 37,100,1246511 37,40,100,1246511N 406512 37,40,100,1246512N 406530 32,40,66,1246530C 40,666530N 40,666531 32,40,66,1246531C 40,666531N 40,666532 32,40,66,1246532C 40,666532N 40,666540 66,1246569 976573 976575 976579 976589 976599 976601 606603 606642 1036643 1036645 1036646 1036647 1036648 1036901 32,40,124,1286901C 406901N 406902 32,40,1246902C 406902N 406903 33,1246904 33,1246905 22,32,40,79, 83,93,94,1246905C 406905N 406906 32,40,1246906C 406906N 406907 32,40,1246907C 406907N 406910 986913 996914 986915 98

134

PRODUCT INDEX


6916 986920 986921 986922 986923 986924 986925 986926 986927 996929 32,38,40,51,1246930 32,38,40,51,1246930B 386930C 406930E 38,516930GL/GR 396930L 38,516930N 406930S 386930T 39,516930V 386931 32,38,40,51,1246931B 386931C 406931E 38,516931GL/GR 396931L 38,516931N 406931S 386931T 39,516931V 38693233,38,40,124,1276932B 386932C 406932N 406932S 386932V 38693332,38,40,100,1246933B 386933C 406933GL/GR 396933N 406933S 386933V 386934 32,38,40,51,1246934B 386934C 406934E 38,516934GL/GR 396934L 38,516934N 406934S 386934T 39,516934V 386935 32,38,40, 51,100,1246935B 386935C 406935E 38,516935GL/GR 396935N 406935S 386935T 39,516935V 386939 33,100,112,1246947 1036948 986952 102

6953 1026955 1026958 102,1096959 1026960 1026961 996963 976964 976967 976969 976970 976971 976973 976975 976979 976980 976984 32,40,100,1246984C 406984N 406985 32,40,100,1246985C 406985N 406986 33,100,112,1246987 33,40,1246987C 406987N 406988 33,100,112,1246989 976991 986997 996998 986999 977063 307103 14,787104 14,787109 167110 15,267111 157112 167115 167118 167119 167120 157122 167125 167128 167130 157139 167140 147141 147142 167145 167148 167150 157160 247161 20,24,80,937162 20,787163 157164 20,82,95,1017170 177173 15,277179 167180 18,28,797181 18,287182 167185 167188 16

7190 177191 177192 18,1297203 14,787204 14,787205 167206 167207 167208 167209 167210 8,15,26,307211 157212 167215 167216 167218 167219 167220 157222 167225 167228 167230 157239 167240 147241 147242 167243 157244 167245 167248 167250 157260 19,24,847261 20,24,80,937262 20,787263 157264 20,82,95,1017270 177271 177273 15,277279 167280 8,18,28,30,797281 18,287282 167285 167288 167290 177291 177292 18,1297293 177294 177295 18,1297403 14,787404 14,787405 167406 167407 167408 167409 167410 15,267411 157412 167415 167416 167418 167419 167420 157422 16

7425 167428 167430 157439 167440 147441 147442 167443 157444 167445 167448 167450 157460 19,24,847460-5 19,84,1037462 20,787463 157471 177473 15,277479 167480 18,28,797481 18,287482 167485 167488 167492 18,1297503 14,787504 14,787505 167506 167507 167508 167509 167510 15,267511 157512 167515 167516 167518 167519 167520 157522 167525 167528 167530 157539 167540 147541 147542 167543 157544 167545 167548 167550 157560 19,24,847560-5 19,84,1037562 20,787563 157571 177573 15,277579 167580 18,28,797581 18,287582 167585 167588 167592 18,1297593 17

7594 177595 18,1298106 24,67,1028107 24,67,1028206 24,67,1028207 24,67,1028521 36,64,99,1248522 36,64,99,1248523 36,64,99,1248542 36,64,1248561 36,64,99,1248562 36,64,99,1248570 858571 36,64,1248591 36,64,99,1248593 20,1038594 20,1038610 15,268640 148661 20,24,80,938662 7,36,64,1248662N 88673 15,278708 24,67,1028709 78710 58711 58713 78714 78715 78716 78738 78810 15,268840 148861 20,24,80,938864 20,82,95,1018873 15,278893 178894 178964 20,82,95,1019161 20,24,80,939164 20,82,959201 279202 279203 279204 279205 27

9215 279216 279305 169309 169310 8,15,26,309311 159312 169315 169316 169318 169319 169322 169325 169328 169330 159339 169340 149341 149342 169344 169345 169348 169361 20,24,80,939362 209363 8,9,15,309364 20,82,95,1019371 179373 15,279379 169380 8,18,28,309382 169385 169388 169390 179391 179392 18,1299977 8854684 10354685 10354686 10354687 10354688 10354689 10354690 10354693 10356425 5056525 50

¼"–20 x 1" SEMS 14,19¼"–20 x 2½" RHMS 19¼"–20 x 3" RHMS 193⁄8" × 2" aluminum lag screw 83,913⁄8 × 2" brass lag screw 42,83,913⁄8 × 2" stainless steel lag screw 83,913⁄8 × 2" nickel-silver lag screw 83,913⁄8 × 1½" steel stud 10,83,91,943⁄8 × 3" steel hanger bolt 83,91,925⁄16 × ½" post bracket hanger bolt 83,87,913⁄8 × 3" sleeve anchor bolt 19,23,64,85A25-140 threaded rivet 19A25-200 threaded rivet 19Arc-Fit Pipe Notcher 26,27Expansion shields 83,91Heavy-duty double machine bolt anchors 83,91Rivet heading tool 19,23SA-100 103Scotch-Weld® epoxy 9,22,30,36,64

JULIUS BLUM & CO., INC.P.O. Box 816Carlstadt, NJ 07072-0816 50 Blum BoulevardWood-Ridge, NJ 07075Toll Free (U.S. & Canada) 800-526-6293Local New Jersey 201-438-4600Fax 201-438-6003www.juliusblum.comE-mail [email protected]© 2005 Julius Blum & Co., Inc.

Back cover photos:

Top center:ASCAP Building, Nashville, TN Architect: Bullia Associates Fabricator: Ameriprise, Nashville, TN

Middle left: Fabricator: Artistic Railing, Garfield, NJ

Middle right: Business School, Jackson State University, Jackson, MS General Contractor: Harrell Construction, Jackson MS Architect: Eley Associates, Jackson, MS Fabricator: Action Fabricators, Marion, AR

Bottom center: Jerome Duncan Ford, Sterling Heights, MI Architect: TLM & Associates, P.C. Design: Ford & Earl Associates, Inc. Fabricator: Modern Mirror & Glass, Roseville, MI

Catalog Graphic Design: © Emerson, Wajdowicz Studios /NYC / www.designEWS.com


mailto:[email protected]

JuliusBlum&Co.Inc.

JuliusBlum&Co.Inc.

Prin

ted

in C

anad

a

JuliusBlum&Co.Inc.

JuliusBlum&Co.Inc.

P.O. Box 816 Carlstadt, New Jersey 07072 800 526 6293 201 438 4600 Fax 201 438 6003 www.juliusblum.com


julius blum alum catalog

Documents