June 2009 Featured Course

Instructor Jerry Byrd poses with his C-1 Class, held at Vulcan Painters in Bessemer, Alabama in September 2008

Volume 1, Issue 1 • Supplement to JPCL

1

CareerPathways

Fundamentals of Protective Coatings (C-1)

This month, CareerPathways takes a look at its flagship training course - Fundamentals of Protective Coatings or “C-1” as it is commonly

known. C-1 is the cornerstone of the SSPC training curriculum and as such, is the starting point for those entering the protective coatings industry.

C-1 was originally written by Dr. Dick Drisko, Senior Technical Advisor for SSPC, in 1995. Dr. Drisko also served as the first instructor for the course, along with colleagues Tony Cunningham, Crone Knoy and Steve Pinney. The course was created to address a need for basic coatings skills and knowledge that was lacking in the market at the time. According to Michael Damiano, SSPC Director of Product Development,

“C-1 was created because it was thought that there might be a market for basic coatings training for new entrants to the industry, especially those who were not going to necessarily pursue higher-level training or certification.”

C-1 provides just such a practical and basic overview for those who are new to the protective coatings industry. However, it can also serve as a refresher for those who want to review the basics of corrosion protection.

Tony Ippolitti, Business Development Manager with The Sherwin-Williams Company and a C-1 Instructor had this to say about the course,

“For many who take the SSPC C-1 class, it is their inaugural introduction to the world of paints and coatings.”

Students who take C-1 will learn the basic principles of protective coatings. They will also be able to identify different kinds of corrosion and select coatings that meet specific project demands.

C-1 graduates also learn about different coatings and how to select the product that best suits each coatings project.

Finally, students will learn about safety hazards involved in coating operations and the importance of following safety best practices. To learn more about C-1 and see a schedule of public offerings, visit www.sspc.org/training/c-1.html. Or call SSPC toll-free at 1.877.281.7772 or (412) 281.2331 (outside the U.S.).

C-1 Fast Facts & FiguresCurrent number of C-1 Instructors – 28•C-1 has been taught in the following countries:•- Canada - China - Japan - Mexico - Peru - Saudi Arabia - Trinidad - United States

To date, over 2,000 people have taken C-1•Accredited by Florida Board of Professional Engineers•

Did You Know ?C-1 fulfills part of your training requirement for the SSPC Protective Coatings Specialist (PCS) Certification. All students interested in pursuing PCS Certification, having less than 15 years coatings experience, must take the C-1 Exam and the C-2 Course prior to applying to sit for PCS exam.

– Scott Kuperman, Paint Platoon USA

“I feel I learned more in this class, than I did during the previous 10 years in coatings. This class is an absolute must for anyone

even considering getting involved in industrial coatings.”

Each month, SSPC will feature one of its training instructors, to provide information on their background and credentials.

2June 2009

SSPC

SSPC CareerPathways

News & Information

DoD Funds for Coatings TrainingDoD personnel can take the following SSPC Training Courses for free through the DoD program:

Fundamentals of Protective Coatings (C-1)•C-1 Online eCourse•Managing Coatings Projects (C-2)•C-2 Online eCourse•NAVSEA Basic Paint Inspector (NBPI)•Concrete Coating Inspector Program (CCI)•Abrasive Blasting Program (C-7)•Airless Spray Basics (C-12)•Marine Plural Component Program (MPCAC, C-14)•

New Pocket Guide AvailableThe SSPC Pocket Guide to Coating Information is a handy reference to charts, standards, and calculations most frequently needed during surface preparation and coating application. The surface preparation chapter addresses key topics including abrasive selection, dew point factors, dehumidification, and ventilation while the application chapter covers application tips and techniques, proper storage, and commonly used formulas and calculations. Separate sections are devoted to key concrete standards, soluble salts, inspection, and international marine regulations. Members: $14.99, nonmembers: $20.00. Order yours at the SSPC MarketPlace - http://www.sspc.org/marketplace

C-1 Instructor Spotlight

Tony Ippoliti is Business

Development Manager, Water Tanks with the Sherwin-Williams Company. Tony began his career with Sherwin-Williams in 1976 and has successfully served in numerous positions within the organization.

His in-depth knowledge of coatings and job-specific experience enable him to prepare protective coatings and linings specifications for engineering firms, steel fabricators, electric power generators and water/wastewater facilities in the Midwestern US. He also performs corrosion surveys and assists in the evaluation of existing protective coating and lining systems.

In addition to serving as a C-1 instructor, Tony is a certified SSPC Protective Coatings Specialist, a NACE Certified Coatings Inspector, a member of both the SSPC and NACE Speakers Bureaus, a certified SSPC C-1/C-2 instructor, and an instructor for the STI/SPFA Field Erected Water Tank Committee. His postgraduate studies include Metallurgy I and Surface Coatings I,II,III at taken at Kent State University.

Tony has created and presented educational programs for several state and local chapters of the Painting & Decorating Contractors of America, the Construction Specifications Institute, SSPC, NACE and AWWA. He has had input on ASTM, AWWA and SSPC/NACE joint standards-writing committees.

Tony Ippoliti has contributed protective coatings articles for the Journal of Protective Coatings and Linings, American Painting Contractor, Water & Wastes Digest, Environmental Solutions, OPFLOW, Public Works, and other industry magazines and publications. He is a Contributing Author for the new AWWA Handbook on Potable Water Tanks and provided technical review assistance for SSPC’s Generic Coatings and Cleaning and Coating Concrete publications.

Tony is listed in Marquis Who’s Who in America in Science and Engineering and Who’s Who in the Midwest.

PCCP Program Turns 20The SSPC Certification Quality Programs began in 1989, with the creation of the QP 1 - Field Application to Complex Industrial and Marine Structures. QP 1 is a nationally-recognized certification program designed to help facility owners, engineers, and specifiers select qualified industrial painting contractors. For more information on the QP Program, contact Shawn Nedley at 877-281-7772, ext 2210 or nedley@sspc.org.

3SSPC

SSPC CareerPathwaysJune 2009

Training & Certification Schedule July 2009

News & Information

Dates Course Host Location Deadline

Surface Preparation & Coatings Application

July 7-8 Abrasive Blasting (C7) QED Systems San Diego, CA June 16

July 9-10 Water Jetting (C13) QED Systems San Diego, CA June 16

July 13-14 Airless Spray Basics (C12) Todd Pacific Shipyards Seattle, WA June 22

July 10-11 Marine Plural Component ( C14) Todd Pacific Shipyards Seattle, WA June 22

July 15 Applicator Training Basics SSPC Online eCourse

Inspection

July 20-25 Protective Coatings Inspector KTA-Tator Pittsburgh, PA June 29

July 20-25 Protective Coatings Inspector SSPC Ho Chi Minh, Vietnam June 29

Coatings Technology, Management & Safety

July 13-17 Planning & Specifying Coatings Projects (C2) Central Arizona Project Phoenix, AZ June 22

July 15 Fundamentals of Protective Coatings (C1) SSPC Online eCourse

July 15 Planning & Specifying Coatings Projects SSPC Online eCourse

July 15 Quality Control Supervisor SSPC Online eCourse

July 18 Protective Coatings Specialist Exam Central Arizona Project Phoenix, AZ June 22

Want to Save Money on Training? Check Out SSPC eCourses!Always offered beginning the 15th of each month. SSPC’s E-learning programs save on expensive travel costs, and reduce time away from the job. This all-new, interactive web-based system was introduced in 2008. For more information and to register, go to www.sspcelearning.org.

The fully interactive, online system features immediate feedback on quizzes, exercises and exams. It also boasts full motion video of jobsites, equipment and techniques, as well as Flash animations that demonstrate key concepts.

The eCourse lineup includes:

Fundamentals of Protective Coatings (C-1)•Planning & Specifying Coatings Projects (C-2)•Quality Control Supervisor • - New!Applicator Training Basics • - New!

40 24th Street, Sixth FloorPittsburgh, PA 15222

Register Now! • www.sspc.org • 877.281.SSPC

SSPC Training and CertificationIn today’s world, education and training are the keys that open the doors to successful careers in every profession. SSPC is the industry leader in protective coatings training and is an IACET-authorized training provider.

Can’t Make it to One of Our Public Course Offerings ?Let SSPC Bring Them Onsite to You !In an effort to accommodate our customers, SSPC training courses can be brought to your job site or facility anywhere in the world. Pricing for on-site courses is based on the course and number of participants, as well as instructor travel and accommodation costs.

Consider these benefits:

On-site training saves money and provides increased scheduling flexibility•The economics favor on-site training when you have five or more attendees•You select the on-site dates most convenient for your organization•

If you would like to receive a proposal for on-site training, please submit the following information:

The SSPC Course(s) you are considering•Location where you would like to hold the training•Estimated number of students•Tentative Dates•

Send to - Jennifer Miller, miller@sspc.org or toll-free at 1.877.281.7772, ext 2221.

Coming Next Month...Featured ProgramCoating Application Specialist Certification Program( CAS)