jupiter international salesscheduleofquantity

8/12/2019 Jupiter International SalesScheduleOfQuantity

1/35

82

Rate

( in Fig.)

Rate

( in Words) Amount

Rs. P. Rs. P. Rs. P.

1 E A R T H W O R K

1.1 Earth work in excavation by mechanical means (Hydraulic excavator )/

manual means over areas (exceeding 30cm in depth. 1.5m in width as well

as 10 sqm on plan) including disposal of excavated earth, lead upto 50m

and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

1.1.1 All kinds of soil 1830.00 cum cum 90.00 Rupees Ninety Only 164700.00

1.2 Earth work in excavation by mechanical means (Hydraulic Excavator )/

manual means in foundation trenches or drains (not exceeding 1.5 m in

width or 10 sqm on plan) including dressing of sides and ramming of

bottoms, lift upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead of 50 m.

1.2.1 All kinds of soil. 250.00 cum cum 90.00 Rupees Ninety Only 22500.00

1.3 Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m including getting out the excavated soil, and then returning

the soil as required, in layers not exceeding 20 cm in depth includingconsolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed, within a lead of 50 m :

1.3.1 All kinds of soil

1.3.1.1 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 300.00 metre metre 90.00 Rupees Ninety Only 27000.00

1.4 Filling available excavated earth (excluding rock) in trenches, plinth, sides

of foundations etc. in layers not exceeding 20cm in depth, consolidating

each deposited layer by ramming and watering, lead up to 50 m and lift

upto 1.5 m. 2000.00 cum cum 35.00 Rupees Thirty Five Only 70000.00

Sub Total Rs: 284200.00

2 C O N C R E T E W O R K

Jupiter International (Sales)

SCHEDULE OF QUANTITY FOR MAJOR COMPONENT (CIVIL) OF WORK

Name of Work : C/o Residential Qtrs. Type-II/32 Nos. alongwith provision of stilt parking i/c internal water supply, sanitary installation & drainage etc. i/c electrical

installation and horticulture work at BSF, Campus-II, Choup, Jaipur.

Item No. Sub-heads and item of work UnitQuantity

Name of Agency / Firm


2/35

83

Rate

( in Fig.)

Rate

( in Words) Amount



2.1 Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinth level :

2.1.1 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm

nominal size) 150.00 cum cum 1900.00

Rupees One Thousand Nine

Hundred Only 285000.00

2.2 Extra for providing and mixing water proofing material in cement concrete

work in doses by weight of cement as per manufacturers specification.

250.00

per 50

kg

cement

per 50

kg

cement 50.00 Rupees Fifty Only 12500.00


3 REINFORCED CEMENT CONCRETE

3.1 Centring and shuttering including strutting, propping etc. and removal of

form for :

3.1.1 Foundations, footings, bases of columns, etc. for mass concrete. 660.00 sqm sqm 100.00 Rupees One Hundred Only 66000.00

3.1.2 Walls (any thickness) including attached pilasters, buttresses, plinth and

string courses etc. 368.00 sqm sqm 100.00 Rupees One Hundred Only 36800.00

3.1.3 Suspended floors, roofs, landings, balconies and access platform. 2325.00 sqm sqm 250.00 Rupees Two Hundred Fifty Only 581250.00

3.1.4 Shelves (Cast in situ) 110.00 sqm sqm 200.00 Rupees Two Hundred Only 22000.00

3.1.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 1500.00 sqm sqm 200.00 Rupees Two Hundred Only 300000.00

3.1.6 Columns, Pillars, Piers, Abutments, Posts and Struts.

510.00 sqm sqm 175.00

Rupees One Hundred Seventy Five

Only 89250.00

3.1.7 Stairs, (excluding landings) except spiral-staircases. 400.00 sqm sqm 250.00 Rupees Two Hundred Fifty Only 100000.00

3.1.8 Weather shade, Chajjas, corbels etc., including edges. 200.00 sqm sqm 250.00 Rupees Two Hundred Fifty Only 50000.00

3.2 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia

mild steel wire including centring and shuttering, roughening cleaning,

fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc.

complete excluding plastering of the jambs, sills and soffits.

3.2.1 50 mm thick 150.00 sqm sqm 600.00 Rupees Six Hundred Only 90000.00

3.3 Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

3.3.1 Thermo-Mechanically Treated bars. 40000.00 kg kg 58.00 Rupees Fifty Eight Only 2320000.00

3.4 Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.


3/35

84

Rate

( in Fig.)

Rate

( in Words) Amount



3.4.1 Thermo-Mechanically Treated bars. 84700.00 kg kg 58.00 Rupees Fifty Eight Only 4912600.003.5 Providing and laying in position machine batched, machine mixed design

mix M-25 grade cement concrete for reinforced cement concrete work

using cement content as per approved design mix, including pumping of

concrete to site of laying but excluding the cost of centring, shuttering,

finishing and reinforcement, including admixtures in recommended

proportions as per IS 9103 to accelerate, retard setting of concrete,

improve workability without impairing strength and durability as per

direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum excess/

less cement used as per design mix is payable/ recoverable separately).

3.5.1 All works upto plinth level.

500.00 cum cum 3900.00

Rupees Three Thousand Nine


3.5.2 All works above plinth level and upto floor V level.

770.00 cum cum 4400.00

Rupees Four Thousand Four


3.6 Add for using extra cement in the items of design mix over and above the

specified cement content therein. 492.00 quintal quintal 555.00

Rupees Five Hundred Fifty Five

Only 273060.00


4 B R I C K W O R K

4.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in: 4.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

200.00 cum cum 2800.00

Rupees Two Thousand Eight


4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

4.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand) 530.00 cum cum 3000.00 Rupees Three Thousand Only 1590000.00

4.3 Half brick masonry with common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 in superstructure above plinth level up to floor V

level.

4.3.1 Cement mortar 1:4 (1 cement :4 coarse sand) 2050.00 sqm sqm 400.00 Rupees Four Hundred Only 820000.00


4/35

85

Rate

( in Fig.)

Rate

( in Words) Amount



Sub Total Rs: 2970000.005 M A R B L E W O R K

5.1 Providing and fixing 18mm thick gang saw cut mirror polished

(premoulded and prepolished) machine cut for kitchen platforms, vanity

counters ,window sills , facias and similar locations of required size of

approved shade, colour and texture laid over 20mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including

rubbing, curing moulding and polishing to edge to give high gloss finish

etc. complete at all levels.

5.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.

5.1.1.1 Area of slab over 0.50 sqm.

175.00 sqm sqm 1500.00

Rupees One Thousand Five



6 W O O D A N D P . V. C. W O R K

6.1 Providing and fixing ISI marked flush door shutters conforming to IS:

2202 (Part I) non-decorative type, core of block board construction with

frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters :

6.1.1 35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws. 385.00 sqm sqm 1600.00

Rupees One Thousand Six Hundred

Only 616000.00

6.1.2 25mm thick (for cupboard) including ISI marked Stainless steel butt

hinges with necessary screws/belding with T-iron frame. 81.00 sqm sqm 1300.00

Rupees One Thousand Three


6.2 Extra for cutting rebate in flush door shutters (Total area of the shutter to

be measured).

81.00

sqm of

door

area

sqm of

door

area 15.00 Rupees Fifteen Only 1215.00

6.3 Providing and fixing wire gauze shutters using stainless steel wire gauze

of average width of aperture 1.4mm in both direction with wire of dia.

0.63 mm for doors, windows and clerestory windows with hinges and

necessary screws:


5/35

86

Rate

( in Fig.)

Rate

( in Words) Amount



6.3.1 30 mm thick shutters with ISI marked M.S. pressed butt hinges brightfinished of required size.

6.3.1.1 Kiln seasoned and chemically treated hollock wood.

62.00 sqm sqm 2500.00

Rupees Two Thousand Five


6.4 Providing and fixing nickel plated M.S. pipe curtain rods with nickel

plated brackets :

6.4.1 25 mm dia (heavy type)

400.00 metre metre 120.00 Rupees One Hundred Twenty Only 48000.00

6.5 Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete.

6.5.1 Fixed to steel windows by welding. 1600.00 kg kg 75.00 Rupees Seventy Five Only 120000.00

6.6 Providing and fixing bright finished brass hasp and staple (safety type)

with necessary screws etc. complete:

6.6.1 150 mm 32.00 nos. each 150.00 Rupees One Hundred Fifty Only 4800.00

6.7 Providing and fixing aluminium sliding door bolts ISI marked anodised

(anodic coating not less than grade AC 10 as per IS : 1868) transparent or

dyed to required colour or shade with nuts and screws etc. complete :

6.7.1 300x16 mm

65.00 nos. each 275.00

Rupees Two Hundred Seventy Five

Only 17875.00

6.7.2 250x16 mm 352.00 nos. each 250.00 Rupees Two Hundred Fifty Only 88000.00

6.8 Providing and fixing aluminium tower bolts ISI marked anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade with necessary screws etc. complete :

6.8.1 250x10 mm 256.00 nos. each 100.00 Rupees One Hundred Only 25600.00

6.8.2 150x10 mm 128.00 nos. each 90.00 Rupees Ninety Only 11520.00

6.9 Providing and fixing aluminium handles ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour or shade with necessary screws etc. complete :

6.9.1 100 mm 515.00 nos. each 80.00 Rupees Eighty Only 41200.00


6/35

87

Rate

( in Fig.)

Rate

( in Words) Amount



6.10 Providing and fixing aluminium hanging floor door stopper ISI markedanodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade with necessary screws

etc. complete.

6.10.1 Twin rubber stopper 160.00 nos. each 55.00 Rupees Fifty Five Only 8800.00

6.11 Providing and fixing factory made P.V.C. door frame of size 50x47mm

with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of

15x15mm M.S. square tube, the vertical door frame profiles to be

reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber

gasket weather seal to be provided through out the frame. The door frame

to be fixed to the wall using M.S. screws of 65/100mm size, complete asper manufacturers specification and direction of Engineer-in-Charge.

325.00 metre metre 600.00 Rupees Six Hundred Only 195000.00

6.12 Providing and fixing factory made 30 mm thick door shutter made of solid

PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm

having wall thickness 5 mm. The styles, top & bottom rails shall have one

side wall thickness of 15 mm integrally extruded on the hinge side of the

profile for better screw holding power. The styles and rails shall be

reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with

primer , all four corners of reinforcement to be welded or sealed. Solid

PVC extruded bidding (push fit type) will be set inside the styles and therails with a cavity, to receive single piece extruded 5 mm PVC sheet as

panel. The styles and rails will be mitred cut and joint with the help of

PVC solvent cement & self driven self tapping screws. Single piece

extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness

5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed

with styles with the help of PVC solvent cement & self driven self tapping

screws of size

100 mm x 8 mm complete as per manufacturer's specifications and

direction of Engineer-in-charge:


7/35

88

Rate

( in Fig.)

Rate

( in Words) Amount



6.12.1 Non decorative finish.

108.00 sqm sqm 2500.00




7 S T E E L W O R K

7.1 Providing and fixing 1mm thick M.S. sheet door with frame of

40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and

corners, all necessary fittings complete, including applying a priming coat

of approved steel primer.

7.1.1 Using flats 30x6mm for diagonal braces and central cross piece.

24.00 sqm sqm 2500.00



7.2 Providing and fixing factory made ISI marked steel glazed doors,

windows and ventilators side /top /centre hung with beading and all

members such as F7D, F4B, K11 B and K12 B etc. complete of standard

rolled steel sections, joints mitred and flash butt welded and sash bars

tenoned and riveted, including providing and fixing of hinges, pivots,

including priming coat of approved steel primer , but excluding the cost of

other fittings, complete all as per approved design (sectional weight of

only steel members shall be measured for payment).

7.2.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete

block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded

stone aggregate 20 mm nominal size). 6500.00 kg kg 90.00 Rupees Ninety Only 585000.00

7.3 Providing and fixing pressed steel door frames conforming to IS: 4351manufactured from commercial mild steel sheet of 1.60 mm thickness

including hinges, jamb, lock jamb, bead and if required angle threshold of

mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed

mild steel welded or rigidly fixed together by mechanical means,

including M.S. pressed butt hinges, 2.5mm thick with mortar guards, lock

strike-plate and shock absorbers as specified and applying a coat of

approved steel primer after pre-treatment of the surface as directed by

Engineer-in-charge:

7.3.1 Profile B


8/35

89

Rate

( in Fig.)

Rate

( in Words) Amount



7.3.1.1 Fixing with adjustable lugs with split end tail to each jamb.

420.00 metre metre 380.00

Rupees Three Hundred Eighty

Only 159600.00

7.3.2 Profile C

7.3.2.1 Fixing with adjustable lugs with split end tail to each jamb.



Only 317300.00

7.4 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar

bent to shape with hooked ends in R.C.C. slabs, beams during laying

including painting the exposed portion of loop, all as per standard design

complete. 100.00 nos. each 100.00 Rupees One Hundred Only 10000.00

7.5 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for

ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm

thick M.S. sheet with its top surface hacked for proper bonding, top lidshall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm

dia. round headed screws, one lock at the corners. Clamp shall be made of

12mm dia M.S. bar bent to shape as per standard drawing. 30.00 nos. each 150.00 Rupees One Hundred Fifty Only 4500.00

7.6 Steel work welded in built up sections/ framed work including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

7.6.1 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar

works. 7000.00 kg kg 70.00 Rupees Seventy Only 490000.00

7.7 Providing and fixing hand rail of approved size by welding etc. to steel

ladder railing, balcony railing, staircase railing and similar works,including applying a priming coat of approved steel primer.

7.7.1 M.S. tube. 1700.00 kg kg 90.00 Rupees Ninety Only 153000.00

7.8 Providing & fixing fly proof wire gauze to windows, clerestory windows

& doors with M.S. Flat 15x3m and nuts & bolts complete.

7.8.1 Stainless steel Wire gauze with 0.63mm dia wire and 1.4 mm aperture

on both sides 290.00 sqm sqm 600.00 Rupees Six Hundred Only 174000.00

7.9 Providing & fixing glass panes with putty and glazing clips in steel doors,

windows, clerestory windows all complete.

7.9.1 With 4.0 mm thick glass panes. 225.00 sqm sqm 500.00 Rupees Five Hundred Only 112500.00



9/35

90

Rate

( in Fig.)

Rate

( in Words) Amount



8 F L O O R I N G

8.1 52 mm thick cement concrete flooring with concrete hardener topping,

under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand :

4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick

cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded

stone aggregate 6 mm nominal size) by volume, .hardening compound

mixed @ 2 litre per 50kg of cement or as per manufacturers specifications.

This includes cost of cement slurry, but excluding the cost of nosing of

steps etc. complete. 385.00 sqm sqm 400.00 Rupees Four Hundred Only 154000.00

8.2 Kota stone slab flooring over 20 mm (average) thick base laid over and

jointed with grey cement slurry mixed with pigment to match the shade of

the slab including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) :

8.2.1 25 mm thick. 225.00 sqm sqm 700.00 Rupees Seven Hundred Only 157500.00

8.3 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars

laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand)

and jointed with grey cement slurry mixed with pigment to match the

shade of the slabs, including rubbing and polishing complete. 260.00 sqm sqm 700.00 Rupees Seven Hundred Only 182000.00

8.4 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone

slab. 435.00 metre metre 25.00 Rupees Twenty Five Only 10875.00

8.5 Providing and fixing Ist quality ceramic glazed wall tiles of size 300 x 450

mm conforming to IS : 15622 (thickness to be specified by themanufacturer) of approved make in all colours, shades and design of any

size as approved by Engineer-in-Charge in skirting, risers of steps and

dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade 1070.00 sqm sqm 700.00 Rupees Seven Hundred Only 749000.00


10/35

91

Rate

( in Fig.)

Rate

( in Words) Amount



8.6 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to

be specified by the manufacturer) of 1st quality conforming to IS : 15622

of approved make in all colours, shades and design, laid on 20 mm thick

Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the

joints with white cement and matching pigment etc., complete.

282.00 sqm sqm 700.00 Rupees Seven Hundred Only 197400.00

8.7 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or

more (thickness to be specified by the manufacturer) of 1st quality

conforming to IS : 15622 of approved make in all colours, shades and

design, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand)

including grouting the joints with white cement and matching pigments

etc., complete. 1280.00 sqm sqm 800.00 Rupees Eight Hundred Only 1024000.00Sub Total Rs: 2474775.00

9 R O O F I N G

9.1 Providing and fixing on wall face Unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A including jointing with seal ring

conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i)

Single socketed pipes

9.1.1 110 mm diameter 400.00 metre metre 300.00 Rupees Three Hundred Only 120000.00

9.2 Providing and fixing on wall face Unplasticised - PVC moulded fitt ings/

accessories for Unplasticised Rigid PVC rain water pipes conforming to

IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.

9.2.1 Bend 87.5

9.2.1.1 110 mm bend 35.00 nos. each 150.00 Rupees One Hundred Fifty Only 5250.00

9.2.2 Shoe (Plain)

9.2.2.1 110 mm Shoe 35.00 nos. each 150.00 Rupees One Hundred Fifty Only 5250.00

9.3 Providing and fixing Unplasticised -PVC pipe clips of approved design to

Unplasticised - PVC rain water pipes by means of 50x50x50mm hard

wood plugs, screwed with M.S. screws of required length including

cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse

sand) and making good the wall etc. complete.


11/35

92

Rate

( in Fig.)

Rate

( in Words) Amount



9.3.1 110 mm 240.00 nos. each 50.00 Rupees Fifty Only 12000.00

9.4 Providing and fixingto the inlet mouth of rain water pipecast iron grating

15 cm diameter and weighing not less than 440 grams. 35.00 nos. each 50.00 Rupees Fifty Only 1750.00


10 F I N I S H I N G

10.1 12 mm cement plaster of mix :

10.1.1 1:6 (1 cement : 6 fine sand) 4000.00 sqm sqm 130.00 Rupees One Hundred Thirty Only 520000.00

10.2 15 mm cement plaster on the rough side ofsingle orhalf brickwall ofmix

:

10.2.1 1:6 (1 cement : 6 fine sand) 7800.00 sqm sqm 140.00 Rupees One Hundred Forty Only 1092000.00

10.3 12 mm cement plaster finished with a floating coat of neat cement of mix :

10.3.1 1:3 (1 cement : 3 fine sand) 150.00 sqm sqm 150.00 Rupees One Hundred Fifty Only 22500.00

10.4 6 mm cement plaster of mix :

10.4.1 1:3 (1 cement : 3 fine sand) 1830.00 sqm sqm 100.00 Rupees One Hundred Only 183000.00

10.5 Extra for plastering exterior walls of height more than 10 m from ground

level for every additional height of 3 m or part thereof. 600.00 sqm sqm 50.00 Rupees Fifty Only 30000.00

10.6 Distempering with 1st quality acrylic distemper (ready mixed) of

approved manufacturer, of required shade and colour complete, as per

manufacturer's specification.

10.6.1 Two or more coats on new work. 5900.00 sqm sqm 50.00 Rupees Fifty Only 295000.00

10.7 Finishing walls with Acrylic Smooth exterior paint of required shade:

10.7.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over andincluding priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). 7800.00 sqm sqm 55.00 Rupees Fifty Five Only 429000.00

10.8 Applying priming coat :

10.8.1 With ready mixed pink or Grey primer of approved brand and

manufacture on wood work (hard and soft wood) 1070.00 sqm sqm 20.00 Rupees Twenty Only 21400.00

10.9 Painting with synthetic enamel paint of approved brand and manufacture

to give an even shade :

10.9.1 Two or more coats on new work 2210.00 sqm sqm 45.00 Rupees Forty Five Only 99450.00

10.10 Providing and applying white cement based putty of average thickness 1

mm, of approved brand and manufacturer, over the plastered wall surface

to prepare the surface even and smooth complete. 13700.00 sqm sqm 65.00 Rupees Sixty Five Only 890500.00


12/35

93

Rate

( in Fig.)

Rate

( in Words) Amount




11 R O A D W O R K

11.1 Providing and laying 60mm thick factory made cement concrete

interlocking paver block of M -30 grade made by block making machine

with strong vibratory compaction, of approved size, design & shape, laid

in required colour and pattern over and including 50mm thick compacted

bed of fine sand, filling the joints with fine sand etc. all complete as per

the direction of Engineer-in-charge. 180.00 sqm sqm 600.00 Rupees Six Hundred Only 108000.00

11.2 Providing and laying at or near ground level factory made kerb stone of M

25 grade cement concrete in position to the required line, level and

curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand)

including making joints with or without grooves (thickness of joints

except at sharp curve shall not to more than 5mm), including making

drainage opening wherever required complete etc. as per direction of

Engineer-in-charge (length of finished kerb edging shall be measured for

payment). (Precast C.C. kerb stone shall be approved by Engineer-in-

charge). 2.00 cum cum 5000.00 Rupees Five Thousand Only 10000.00


12 SANITARY INSTALLATIONS

12.1 Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures

complete including cutting and making good the walls and floors wherever

required :

12.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with

integral type foot rests. 32.00 nos. each 3000.00 Rupees Three Thousand Only 96000.00

12.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps,32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever require :


13/35

94

Rate

( in Fig.)

Rate

( in Words) Amount



12.2.1 White Vitreous China Flat back wash basin size 550x400 mm with single

15 mm C.P. brass pillar tap. 32.00 nos. each 2500.00



12.3 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per

IS 13983 with C.I. brackets and stainless steel plug 40 mm including

painting of fittings and brackets, cutting and making good the walls

wherever required :

12.3.1 Kitchen sink with drain board

12.3.1.1 510x1040 mm bowl depth 250mm.

32.00 nos. each 6500.00

Rupees Six Thousand Five Hundred

Only 208000.00

12.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete.

12.4.1 Flexible pipe 12.4.1.1 32 mm dia 64.00 nos. each 50.00 Rupees Fifty Only 3200.00

12.5 Providing and fixing 100 mm sand cast Iron grating for gully trap. 96.00 nos. each 30.00 Rupees Thirty Only 2880.00

12.6 Providing and fixing mirror of superior glass (of approved quality) and of

required shape and size with plastic moulded frame of approved make and

shade with 6 mm thick hard board backing :

12.6.1 Rectangular shape 453x357mm 32.00 nos. each 650.00 Rupees Six Hundred Fifty Only 20800.00

12.7 Providing and fixing soil, waste and vent pipes :

12.7.1 100 mm dia.

12.7.1.1 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.

200.00 metre metre 800.00 Rupees Eight Hundred Only 160000.0012.7.2 75 mm diameter :

12.7.2.1 Centrifugally cast (spun) iron socketed pipe as per IS: 3989. 320.00 metre metre 750.00 Rupees Seven Hundred Fifty Only 240000.00

12.8 Providing and fixing M.S. holder-bat clamps of approved design to Sand

Cast iron/cast iron (spun) pipe embedded in and including cement

concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) including cost of cutting

holes and making good the walls etc. :

12.8.1 For 100 mm dia. Pipe 100.00 nos. each 50.00 Rupees Fifty Only 5000.00

12.8.2 For 75 mm dia. Pipe 210.00 nos. each 50.00 Rupees Fifty Only 10500.00


14/35

95

Rate

( in Fig.)

Rate

( in Words) Amount



12.9 Providing and fixing bend of required degree with access door, insertion

rubber washer 3 mm thick, bolts and nuts complete.

12.9.1 100 mm

12.9.1.1 Sand cast iron S&S as per IS - 3989 64.00 nos. each 400.00 Rupees Four Hundred Only 25600.00

12.9.2 75 mm dia

12.9.2.1 Sand cast iron S&S as per IS- 3989 64.00 nos. each 300.00 Rupees Three Hundred Only 19200.00

12.10 Providing and fixing plain bend of required degree.

12.10.1 100 mm

12.10.1.1 Sand cast iron S&S as per IS : 3989 42.00 nos. each 350.00 Rupees Three Hundred Fifty Only 14700.00

12.10.2 75 mm

12.10.2.1 Sand cast iron S&S as per IS - 3989 96.00 nos. each 250.00 Rupees Two Hundred Fifty Only 24000.00

12.11 Providing and fixing single equal plain junction of required degree withaccess door, insertion rubber washer 3 mm thick, bolts and nuts complete.

12.11.1 100x100x100 mm

12.11.1.1 Sand cast iron S&S as per IS - 3989 40.00 nos. each 500.00 Rupees Five Hundred Only 20000.00

12.11.2 75x75x75 mm

12.11.2.1 Sand cast iron S&S as per IS - 3989 80.00 nos. each 400.00 Rupees Four Hundred Only 32000.00

12.12 Providing and fixing terminal guard:

12.12.1 100 mm

12.12.1.1 Sand cast iron S&S as per IS - 3989 10.00 nos. each 250.00 Rupees Two Hundred Fifty Only 2500.00

12.12.2 75 mm

12.12.2.1 Sand cast iron S&S as per IS - 3989

20.00 nos. each 225.00

Rupees Two Hundred Twenty Five

Only 4500.00

12.13 Providing and fixing collar:

12.13.1 100 mm

12.13.1.1 Sand cast iron S&S as per IS - 3989 100.00 nos. each 300.00 Rupees Three Hundred Only 30000.00

12.13.2 75 mm

12.13.2.1 Sand cast iron S&S as per IS- 3989 150.00 nos. each 250.00 Rupees Two Hundred Fifty Only 37500.00

12.14 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun)

iron pipes and fittings of diameter:

12.14.1 100 mm 200.00 nos. each 200.00 Rupees Two Hundred Only 40000.00


15/35

96

Rate

( in Fig.)

Rate

( in Words) Amount



12.14.2 75 mm

400.00 nos. each 175.00

Rupees One Hundred Seventy Five

Only 70000.00

12.15 Providing and fixing trap of self cleansing design with screwed down or

hinged grating with or without vent arm complete, including cost of

cutting and making good the walls and floors :

12.15.1 100 mm inlet and 75 mm outlet

12.15.1.1 Sand cast iron S&S as per IS - 3989 128.00 nos. each 700.00 Rupees Seven Hundred Only 89600.00

12.16 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent

pipes and fittings with two coats of synthetic enamel paint of any colour

such as chocolate grey, or buff etc. over a coat of primer (of approved

quality) for new work :

12.16.1 100 mm diameter pipe 200.00 metre metre 15.00 Rupees Fifteen Only 3000.0012.16.2 75 mm diameter pipe 320.00 metre metre 15.00 Rupees Fifteen Only 4800.00


13 WATER SUPPLY

13.1 Providing and fixing G.I. pipes complete with G.I. fit tings and clamps,

including cutting and making good the walls etc.

Internal work - Exposed on wall

13.1.1 20 mm dia. nominal bore 220.00 metre metre 180.00 Rupees One Hundred Eighty Only 39600.00

13.1.2 25 mm dia. nominal bore 450.00 metre metre 210.00 Rupees Two Hundred Ten Only 94500.00

13.1.3 32 mm dia. nominal bore 145.00 metre metre 250.00 Rupees Two Hundred Fifty Only 36250.00

13.2 Providing and fixing G.I. pipes complete with G.I. fit tings and clampsincluding making good the walls etc. concealed pipe including painting

with anti corrosive bitumastic paint, cutting chases and making good the

wall.

13.2.1 15 mm dia nominal bore

500.00 metre metre 170.00 Rupees One Hundred Seventy Only 85000.00

13.2.2 20 mm dia nominal bore 235.00 metre metre 200.00 Rupees Two Hundred Only 47000.00

13.3 Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc.

External work :


16/35

97

Rate

( in Fig.)

Rate

( in Words) Amount



13.3.1 40 mm dia. nominal bore


Rupees Three Hundred Seventy

Five Only 75000.00

13.3.2 50 mm dia. nominal bore 100.00 metre metre 500.00 Rupees Five Hundred Only 50000.00

13.4 Making connection of G.I. distribution branch with G.I. main of following

sizes by providing and fixing tee, including cutting and threading the pipe

etc. complete :

13.4.1 50 to 80 mm nominal bore 10.00 nos. each 1000.00 Rupees One Thousand Only 10000.00

13.5 Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end) :

13.5.1 25 mm nominal bore 50.00 nos. each 400.00 Rupees Four Hundred Only 20000.00

13.5.2 32 mm nominal bore. 10.00 nos. each 500.00 Rupees Five Hundred Only 5000.00

13.5.3 40 mm nominal bore 5.00 nos. each 600.00 Rupees Six Hundred Only 3000.0013.5.4 50 mm nominal bore 5.00 nos. each 800.00 Rupees Eight Hundred Only 4000.00

13.6 Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

13.6.1 20 mm nominal bore 10.00 nos. each 300.00 Rupees Three Hundred Only 3000.00

13.7 Providing and fixing uplasticised PVC connection pipe with brass unions :

13.7.1 45 cm length

13.7.1.1 15 mm nominal bore 96.00 nos. each 50.00 Rupees Fifty Only 4800.00

13.8 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

13.8.1 150 mm diameter 32.00 nos. each 100.00 Rupees One Hundred Only 3200.00

13.9 Constructing masonry Chamber 30x30x50 cm inside, in brick work in

cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged cover fixed in cement

concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), i/c necessary excavation, foundation

concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm

nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3

coarse sand) 12mm thick finished with a floating coat of neat cement

complete as per standard design :

13.9.1 With common burnt clay F.P.S.(non modular) bricks of class designation

7.5. 10.00 nos. each 1000.00 Rupees One Thousand Only 10000.00


17/35

98

Rate

( in Fig.)

Rate

( in Words) Amount



13.10 Painting G.I. pipes and fittings with synthetic enamel white paint with two

coats over a ready mixed priming coat, both of approved quality for new

work :

13.10.1 20 mm diameter pipe. 220.00 metre metre 10.00 Rupees Ten Only 2200.00

13.10.2 25 mm diameter pipe. 450.00 metre metre 12.00 Rupees Twelve Only 5400.00

13.10.3 32 mm diameter pipe. 145.00 metre metre 15.00 Rupees Fifteen Only 2175.00

13.11 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic

paint of approved quality :

13.11.1 40 mm diameter pipe 200.00 metre metre 12.00 Rupees Twelve Only 2400.00

13.11.2 50 mm diameter pipe 100.00 metre metre 15.00 Rupees Fifteen Only 1500.00

13.12 Providing and fixing G.I. Union in G.I. pipe including cutting and

threading the pipe and making long screws etc. complete (New work)13.12.1 20 mm nominal bore

20.00 nos. each 125.00

Rupees One Hundred Twenty Five

Only 2500.00

13.12.2 25 mm nominal bore 80.00 nos. each 150.00 Rupees One Hundred Fifty Only 12000.00

13.12.3 32 mm nominal

40.00 nos. each 170.00 Rupees One Hundred Seventy Only 6800.00

13.12.4 40 mm nominal bore 40.00 nos. each 250.00 Rupees Two Hundred Fifty Only 10000.00

13.12.5 50mm nominal bore 20.00 nos. each 350.00 Rupees Three Hundred Fifty Only 7000.00

13.13 Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 gms.

13.13.1 15 mm nominal bore. 160.00 nos. each 550.00 Rupees Five Hundred Fifty Only 88000.00

13.14 Providing and fixing C.P. brass stop cock (concealed) of standard design

and of approved make conforming to IS:8931.

13.14.1 15 mm nominal bore.

96.00 nos. each 525.00

Rupees Five Hundred Twenty Five

Only 50400.00

13.15 Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931

13.15.1 15 mm nominal bore 128.00 nos. each 400.00 Rupees Four Hundred Only 51200.00


14 D R A I N A G E


18/35

99

Rate

( in Fig.)

Rate

( in Words) Amount



14.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff

mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)

including testing of joints etc. complete :

14.1.1 100 mm diameter 67.00 metre metre 150.00 Rupees One Hundred Fifty Only 10050.00

14.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :

10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes

including bed concrete as per standard design:

14.2.1 100 mm diameter S.W. pipe 58.00 metre metre 200.00 Rupees Two Hundred Only 11600.00

14.3 Providing and fixing square-mouth S.W. gully trap class SP1 complete

with C.I. grating brick masonry chamber with water tight C.I. cover with

frame of 300 x300 mm size (inside) the weight of cover to be not less than

4.50 kg and frame to be not less than 2.70 kg as per standard design :

14.3.1 100x100 mm size P type

14.3.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation

7.5 30.00 nos. each 1500.00



14.4 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes

with collars jointed with stiff mixture of cement mortar in the proportion

of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

14.4.1 150 mm dia. R.C.C. pipe 80.00 metre metre 400.00 Rupees Four Hundred Only 32000.00

14.4.2 250 mm dia. R.C.C. pipe 215.00 metre metre 500.00 Rupees Five Hundred Only 107500.00

14.5 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4

coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8

mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal

size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 20mm nominal size) finished with a floating coat of neat

cement complete as per standard design :


19/35

100

Rate

( in Fig.)

Rate

( in Words) Amount



14.5.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame

(light duty) 455x610 mm internal dimensions total weight of cover and

frame to be not less than 38 kg (weight of cover 23 kg and weight of frame

15 kg) :


7.5 30.00 nos. each 6500.00

Rupees Six Thousand Five Hundred

Only 195000.00

14.5.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame

(medium duty) 500 mm internal diameter, total weight of cover and frame

to be not less than 116 kg (weight of cover 58 kg and weight of frame 58

kg) :


7.5 6.00 nos. each 15000.00 Rupees Fifteen Thousand Only 90000.0014.6 Extra for depth for manholes

14.6.1 Size 90x80 cm


7.5 10.00 metre metre 2500.00



14.6.2 Size 120x90 cm


7.5 4.00 metre metre 3000.00 Rupees Three Thousand Only 12000.00

14.7 Providing and fixing in position precast R.C.C. manhole cover and frame

of required shape and approved quality

14.7.1 L D- 2.5

14.7.1.1 Rectangular shape 600x450mm internal dimensions

10.00 nos. each 1500.00



14.8 Making connection of drain or sewer line with existing manhole including

breaking into and making good the walls, floors with cement concrete

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) cement plastered on both sides with cement mortar 1:3 (1

cement : 3 coarse sand) finished with a floating coat of neat cement and

making necessary channels for the drain etc. complete :

14.8.1 For pipes 100 to 230 mm diameter 5.00 nos. each 500.00 Rupees Five Hundred Only 2500.00



20/35

101

Rate

( in Fig.)

Rate

( in Words) Amount



15 WATER PROOFING

15.1 Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing

cement compound consisting of applying :

a) First layer of slurry of cement @ 0.488 ksqm mixed with water

proofing cement compound @ 0.253 kg/sqm. This layer will be allowed

to air cure for 4 hours.

b) Second layer of slurry of cement @ 0.242 ksqm mixed with water

proofing cement compound @ 0.126 kg/sqm. This layer will be allowed

to air cure for 4 hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all

joints, corners, junctions of pipes and masonry with polymer mixed slurry.115.00 sqm sqm 250.00 Rupees Two Hundred Fifty Only 28750.00

15.2 Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc consisting of following operations:

a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement

admixed with water proofing compound conforming to IS. 2645 and

approved by Engineer-in-charge over the RCC slab including adjoining

walls upto 300mm height including cleaning the surface before treatment.

b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to

115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge over 20 mm thick layer of cement mortar

of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge

to required slope and treating similarly the adjoining walls upto 300 mm

height including rounding of junctions of walls and slabs


21/35

102

Rate

( in Fig.)

Rate

( in Words) Amount



c) After two days of proper curing applying a second coat of cement slurry

using 2.75kg/ sqm of cement admixed with water proofing compoundconforming to IS : 2645 and approved by Engineer-in-charge.

d) Finishing the surface with 20 mm thick jointless cement mortar of mix

1:4 (1 cement :4 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge including

laying glass fibre cloth of approved quality in top layer of plaster and

finally finishing the surface with trowel with neat cement slurry and

making pattern of 300x300 mm square 3mm deep.

e) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be done in order and as directed and specified by theEngineer-in-Charge :

15.2.1 With average thickness of 120mm and minimum thickness at khurra as

65 mm. 700.00 sqm sqm 650.00 Rupees Six Hundred Fifty Only 455000.00


16 NON SCHEDULE.

16.1 "Providing and placing C.C 1:3:6 (1 Cement : 3coarse sand : 6graded

stone aggregate 20 mm nominal size)in pressed steel door frame profile

C & E all complete as per direction of Engineer-in-charge. 1255.00 mtr mtr 50.00 Rupees Fifty Only 62750.00

16.2 Providing and fixing M.S.grilled single leaf/double leaf security door inexisting door frame with shutter frame of angle iron 30x30x5mm and

made of 10 mm square bars welded with frame including fixing of

stainless steel wire gauge of average width of aperture 1.4mm with wire of

dia 0.63mm fixed with M.S. flat beading 15x3mm and fixing with

necessay butt hinges including applying a priming coat of approved steel

primer and as per design approved by the Engineer -in-charge. (The cost

of stainless stell wire gauge will be paid seprately. The item includes the

cost of MS tower bolt, MS handles both side, MS slaiding door bolt of

size 300 x 16 mm both sides, necessary fixures used to operate the MS

grilled single leaf/double leaf shutters). 2016.00 kg kg 90.00 Rupees Ninety Only 181440.00


22/35

103

Rate

( in Fig.)

Rate

( in Words) Amount



16.3 Providing &fixing 20 mm thick kota stone (top side mirror polished and

bottom side semi polished and machiene cut ) in shelves including fixingto walls in cement mortar 1:4 ( 1 cement :4 coarse sand ) including cutting

chases in masonary , finishing &making good the same comp. 105.00 sqm sqm 600.00 Rupees Six Hundred Only 63000.00

16.4 Providing and laying in position cement concrete of specified grade up to

floor V level exculding the cost of centering and shuttering. in sunken

Floors:

(a) 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm

nominal size), complete as per direction of Engineer-in-charge. 45.00 cum cum 1000.00 Rupees One Thousand Only 45000.00


Total Rs: 31444540.00


23/35

116

Rate

( in Fig.)

Rate

( in Words) Amount


Sub Head-I (Wiring)

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface

/ recessed steel conduit, with modular switch, modular plate, suitable GI

box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Group A 608.00 Point Point 900.00 Rupees Nine Hundred Only 547200.00

2 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed steel conduit

alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single

core cable for loop earthing as required. 2000.00 Metre Metre 200.00 Rupees Two Hundred Only 400000.00

3 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed steel conduit

alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor singlecore cable for loop earthing as required. 400.00 Metre Metre 325.00

Rupees Three Hundred Twenty FiveOnly 130000.00

4 Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single core

cable in surface/ recessed steel conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1600.00 Metre Metre 160.00 Rupees One Hundred Sixty Only 256000.00

2 X 6 sq. mm + 1 X 6 sq. mm earth wire 600.00 Metre Metre 280.00 Rupees Two Hundred Eighty Only 168000.00

2 X 10 sq. mm + 1 X 10 sq. mm earth wire

600.00 Metre Metre 375.00

Rupees Three Hundred Seventy

Five Only 225000.00

Item No. Description of item Quantity Unit

SCHEDULE OF QUANTITY FOR MINOR COMPONENT (ELECTRICAL) OF WORK

Name of Agency / Firm Jupiter International (Sales)

Name of work : C/o Residential Qtrs. Type-II/32 Nos. alongwith provision of stilt parking i/c internal water supply, sanitary installation & drainage etc. i/c electrical installationand horticulture work at BSF, Campus-II, Choup, Jaipur.


24/35

117

Rate

( in Fig.)

Rate

( in Words) Amount



5 Supplying and drawing following sizes of FRLS PVC insulated copper

conductor, single core cable in the existing surface/ recessed steel/ PVC

conduit as required.

6 x 1.5 sq. mm 480.00 Metre Metre 91.00 Rupees Ninety One Only 43680.00

6 Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated

annealed copper conductor, unarmored telephone cable in the existing

surface/ recessed steel/ PVC conduit as required.

4 Pair 800.00 Metre Metre 25.00 Rupees Twenty Five Only 20000.00

7 Supplying and fixing of following sizes of steel conduit along with

accessories in surface/recess including painting in case of surface conduit,

or cutting the wall and making good the same in case of recessed conduit

as required.

25 mm


Rupees One Hundred Forty Four

Only 115200.00

8 Supplying and fixing following modular switch/ socket on the existing

modular plate & switch box including connections but excluding modular

plate etc. as required.

Telephone socket outlet 32.00 Nos Each 88.00 Rupees Eighty Eight Only 2816.00

TV antenna socket outlet 32.00 Nos Each 89.00 Rupees Eighty Nine Only 2848.00

9 Supplying and fixing following size/ modules, GI box alongwith modular

base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

64.00 Nos Each 145.00

Rupees One Hundred Forty Five

Only 9280.00

10 Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 3 pin 5/6

amps modular socket outlet and 5/6 amps modular switch, connection etc.

as required. (For light plugs to be used in non residential buildings). 96.00 Nos Each 304.00 Rupees Three Hundred Four Only 29184.00

11 Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 6 pin 5/6 &

15/16 amps modular socket outlet and 15/16 amps modular switch,

connection etc. as required. 128.00 Nos Each 390.00

Rupees Three Hundred Ninety

Only 49920.00


25/35

118

Rate

( in Fig.)

Rate

( in Words) Amount



Total of Sub Head-I 1999128.00

Sub Head-II (Fitting & Accessoires)

1 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts,

complete as required. 32.00 Nos Each 57.00 Rupees Fifty Seven Only 1824.00

2 Supplying, installation, testing and commissioning of surface mounting

lumianire fabricated out of CRCA Sheet suitable for 1x28 W T-5 lamp

suitable for operation on 230 Volt 50 Hz, Single Phase AC Supply with

electronics ballast. Philips Make Cat. No. TMS 122 M 1 x TL5-28 W

EBT /Bajaj Make Cat. No. BTER 128/Twinkle Make TBF-128/GE Make

Cat. GETCI 1 x 28 C/S HF Complete with all accessories and tubes etc.

directly on ceiling/wall/surface including wiring, connection with 1.5

sq.mm. FRLS PVC insulated Copper Conductor Single Core Cable

including earthing etc. as required. 128.00 Nos. Each 1200.00

Rupees One Thousand Two


3 Supplying, installation, Testing & Commissioning of Energy efficent, five

star rating 1200 mm Size ceiling fans including suitable size down rod

blade canopy etc. as required suitable for operation single phase 230 Volt

50 cycle per second. AC supply including wiring the down rods of

standard length (upto 30 cm) with 1.5 sq. mm. FRLS PVC insulated,

copper conductor, single core cable, including earthing and providing and

fixing phenolic laminated sheet cover on the Fan box etc. as required.

Make Usha/Crompton Greaves/Havells. 96.00 Nos. Each 1600.00

Rupees One Thousand Six Hundred

Only 153600.004 Supplying and fixing stepped type electronic fan regulator on the existing

modular plate switch box including connections but excluding modular

plate etc. as required (Two Moudule) 96.00 Nos Each 351.00

Rupees Three Hundred Fifty One

Only 33696.00

5 Supplying, erection, testing & commissioning of 300 mm sweep, 900 rpm.

AC exhaust fan with louver/shutter in the existing opening including

making the hole to suit the size of the fan & making good the damages,

connections with 16/0.20mm twin core, PVC sheathed flat, flexible

copper cable etc. as required. Make Cromption

Greaves/Havells/Almonard 32.00 Nos. Each 2800.00

Rupees Two Thousand Eight



26/35

119

Rate

( in Fig.)

Rate

( in Words) Amount



6 Supplying, installation, testing & commissioning of 250mm Sweep

decorative fresh air fan with all accessories suitable for operation single

phase 230 volt 50 cycle per second. AC Supply etc. as required. In the

existing opening including making the hole to suit the size of the above

fan, making good the damage, connection, testing, commissioning

earthing etc. as required. Make Crompton Greaves/Bajaj/Havells. 32.00 Nos. Each 1500.00



7 Supplying, Installation, Testing & Commissioning of Mirror Light

suitable for 230 V 50 Hz Single Phase AC Supply including 2 x 13 W

retrofit CFL Lamp complete with connection etc. as required DECON

Make Cat. No. 05 CZ or equilient in Philips or Bajaj Make 32.00 Nos. Each 1100.00

Rupees One Thousand One


8 Supplying, Installation, Testing & Commissioning of Wall mounted

decorative light fixture in approved shade 1 x 18 W CFL Lamp suitable

for operation on 230 volt 50 Hz, Single Phase AC Supply with electro

magnetic ballast, Philips Make Cat. No. HWS370 1 x PL-C/2P-18 W

GR/Decon Shrilanka 1 x 18 complete with all accessories and tubes etc.

directly on ceiling/Wall/Surface including wiring connection with 1.5

sq.mm. FRLS PVC insulated Copper Conductor Single Core Cable

including earthing etc. as required. 160.00 Nos. Each 1400.00

Rupees One Thousand Four


9 Supplying, installation, Testing & Commissioning of Surface mounted

light fixture with 2 x 11 W CFL with Mirror Optics louvers suitable for

operation on 230 Volt 50 Hz Single Phase AC Supply with electronicsballast. Philips Make Cat. No. FCS 031 2 x PL-S/2P11 W /240 Volt/Bajaj

Make Cat. No. BSM211-W2EB S Type CFL/C & S Make Cat. No. LT

CS 101/Havells Make complete with all accessories and tubes etc. directly

on ceiling/wall/surface including wiring , connection with 1.5 sq.mm.

FRLS PVC insulated Copper Conductor single core cable including

earthing etc. as required. 32.00 Nos. Each 1490.00

Rupees One Thousand Four

Hundred Ninety Only 47680.00


27/35

120

Rate

( in Fig.)

Rate

( in Words) Amount



10 Supplying , Installation, Testing & Commissioning of Bulk Head

Luminaire with single piece Aluminium housing & cover retaining frame,

excellent corrosion resistance. Opal acrylic cover along with a gasket

made of E.P.R. to ensure satisfactry performance, wire guard made of

powder coated MS to protect the luminaire from damages (IP 54) suitable

for operation on 230 Volt 50 Hz, Single Phase AC supply with electro

magnetic ballast. Philips Make Cat. No. FXC 101 1 x PL-S/2P 9W AC

GR/GE Make Cat. No. GECFL I 1 x 11 RF BH B22, complete with all

accessories and tube including connection etc. as required.

40.00 Nos. Each 750.00 Rupees Seven Hundred Fifty Only 30000.00

11 Supplying and Fixing brass batten /angle holder i/c connection etc. as

required. 64.00 Nos. Each 60.00 Rupees Sixty Only 3840.00

Total of Sub Head-II 821040.00

Sub Head-III (MCB DB )

1 Supplying and fixing following way, single pole and neutral, sheet steel,

MCB distribution board, 240 volts, on surface/ recess, complete with

tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator)

2 + 12 way, Double door

32.00 Nos Each 1014.00

Rupees One Thousand Fourteen

Only 32448.002 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Single pole 384.00 Nos Each 190.00 Rupees One Hundred Ninety Only 72960.00

3 Supplying and fixing following rating, double pole, 240 volts, isolator in

the existing MCB DB complete with connections, testing and

commissioning etc. as required.

63 amps

32.00 Nos Each 287.00

Rupees Two Hundred Eighty Seven

Only 9184.00

121


28/35

121

Rate

( in Fig.)

Rate

( in Words) Amount



4 Supplying & fixing sutable size GI box with modular plate and cover in

front on surface or in recess, including providing anf fixing 6 pin 25/10

amps modular socket oute and 32 amps modular switch, connection,

painting etc. as required. 32.00 Nos Each 665.00

Rupees Six Hundred Sixty Five

Only 21280.00

Total of Sub Head-III 135872.00

Sub Head-IV ( Meter Board & Service Connection)

1 Fabrication,Supplying,Installation,Testing of wall mounted dust & vermin

proof, front openable, compartmentlised, cubical type meter board made

out of 2 mm thick CRCA sheet of size not less than 1700mm(Height)

x1100mm(Wide)x300mm(deep) having (CPRI approved make)

a. Loose wire box On top of Meter Board of size 1100mm (W) x 100mm ( H)

x 300mm (D)

b. Bus bar chamber of width 300mm (W) x 500mm (H) with 4 Strip 200

Amp. 400mm long Al. bus bars complete with brass screws, PVC tapping

etc.

c. Seperate compartments (4 Nos.) of size 400mm x 400mm x 250mm(D)

and making suitable arragement for the installation of Single phase energy

meter, MCB, neutral link and Providing & fixing 6mm thick bakelite

sheet on the back, complete with hinged covers having locking

arragement,wire mesh screen for meter reading and with the following

mounting i/c connection, inter connection with suitable size of copperconductor cable not less than 6 Sqmm. i/c testing, commissioning

complete with painting etc. as required.

a. 100Amp. 16KA 3 Pole MCCB with adjustable thermal magnetic release

= 1 No.

b. 40Amp. DP MCB = 8 Nos.

c. Brass Neutral l ink 2 Way 32 Amp. in the compartments = 8Nos.

d. Earthing Studs = 2 Nos.

e. Danger Plate ( M.V.) = 1 No. 5.00 Set Each 52000.00 Rupees Fifty Two Thousand Only 260000.00

122


29/35

122

Rate

( in Fig.)

Rate

( in Words) Amount



2 Fabrication, supplying, installation, testing and commissioning of double

door outdoor type floor mounted dust and vermin proof compartmentlised

powder coated feeder pillar made out of 14 SWG MS sheet not less than

1.35 Sqmt. Front area and 400mm deep with 400 Amp. TPN Al. bus bar

duly insulated with heat shrinkable PVC sleeves i/c P/F base frame of

50mmx50mm x 6mm angle having 4 Nos. legs 600mm out of which

300mm grouted in CC foundation and 300mm above ground level cover

all side with 16 SWG MS sheet apran plates having canopy at Top i/c

Pdg. & fixing following electrical switch gear i/c connection inter

connection, earthing labelling etc. as required.

250 Amp, 35 KA,FPMCCB incomer = 1 No.

100 Amp, 16 KA,TPMCCB outgoing = 4 Nos. 2.00 Set Set 80000.00 Rupees Eighty Thousand Only 160000.00

3 Supplying & Laying of following size of one number XLPE insulated and

PVC sheathed armoured Al. conductor cable of 1.1 KV grade confirming

to IS:7098-1988 with upto date amendment direct in ground including

excavation, sand cushioning, protective covering and refilling the trench

etc. as required.

(a) 3.5 x 120 sq. mm 80.00 Metre Metre 95.00 Rupees Ninety Five Only 7600.00

(b) 3.5 x 50 sq. mm


Rupees Five Hundred Seventy

Only 57000.004 Supplying & Laying of following size of one number XLPE insulated and

PVC sheathed power cable of 1.1 KV grade conforming to IS:7098-1988

with upto date amendments on the surface as required.

a) 3.5 x 120 sq. mm 10.00 Metre Metre 850.00 Rupees Eight Hundred Fifty Only 8500.00

b) 3.5 x 50 sq. mm


Rupees Four Hundred Twenty Five

Only 85000.00

5 Supplying & Laying of following size of one number XLPE insulated and

PVC sheathed power cable of 1.1 KV grade conforming to IS:7098-1988

with upto date amendments in the existing RCC/HUME/ STONEWARE

/METAL /DWC pipe as required.

123


30/35

123

Rate

( in Fig.)

Rate

( in Words) Amount



a) 3.5 x 120 sq. mm 6.00 Metre Metre 750.00 Rupees Seven Hundred Fifty Only 4500.00

b) 3.5 x 50 sq. mm



Only 28500.00

6 Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC

sheathed/XLPE aluminium conductor cable of 1.1. KV grade as required.

(a) 3.5 x 120 sq. mm

2.00 Nos Each 380.00


Only 760.00

(b) 3.5 x 50 sq. mm

10.00 Nos Each 285.00

Rupees Two Hundred Eighty Five

Only 2850.00

Total of Sub Head-IV 614710.00

Sub Head-V (Earthing)

1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe etc. with charcoal/ coke and salt

as required. 10.00 Nos Each 3000.00 Rupees Three Thousand Only 30000.00

2 Providing and laying earth connection from earth electrode with 6 SWG

dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including

connection with G.I. thimble excavation and re-filling as required. 100.00 Metre Metre 140.00 Rupees One Hundred Forty Only 14000.00

3 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loopearthing as required. 232.00 Metre Metre 28.00 Rupees Twenty Eight Only 6496.00

Total of Sub Head-V 50496.00

Grand Total Rs: 3621246.00

144


31/35

144

Rate

( in Fig.)

Rate

( in Words) Amount


SUB-HEAD I- DEVELOPMENT WORK

1 Trenching in ordinary soil up to a depth of 60cm including removal and

stacking of serviceable materials and then disposing of surplus soil by

spreading and neatly levelling with in a lead of 50 m and making uo the

trenched area to proper levels by filling with earth or earth mixed with

sludge or/and manure before and after flooding trench with water

(exluding cost of imported earth, sludge or manure) 91.89 cum cum 30.00 Rupees Thirty Only 2757.00

2 Earth work in excavation by mechanical means(Hydraulic excavator) /

manual means over areas ( exceeding 30 cm in depth, 1.5 m in width as

well as 10 sqm on plan) including disposal of excavated earth, lead up to

50m & lift up to 1.5 m; disposed earth to be levelled and neatly dressed:

2.1 All kind of Soil.16.49 cum cum 125.00

Rupees One Hundred Twenty FiveOnly 2061.00

3 Removal of excavated malba by mechanical transport including loading,

unloading and stacking with all leads and lift as per direction of engineer

in charge 25.34 cum cum 100.00 Rupees One Hundred Only 2534.00

4 Supplying & stacking of good earth at site including royalty &

carriage for all leads and lift (earth measured in stacks will be reduced

by 20% for payment). 17.28 Cum Cum 300.00 Rupees Three Hundred Only 5184.00

Unit

SCHEDULE OF QUANTITY FOR MINOR COMPONENT (HORTICULTURE) OF WORK

Item No. Description of item Quantity

Name of Agency / Firm Jupiter International (Sales)

Name of work : C/o Residential Qtrs. Type-II/32 Nos. alongwith provision of stilt parking i/c internal water supply, sanitary installation & drainage etc. i/c electrical installationand horticulture work at BSF, Campus-II, Choup, Jaipur.

145


32/35

Rate

( in Fig.)

Rate

( in Words) Amount


UnitItem No. Description of item Quantity

5 Supply and stacking of well decomposed cow dung / meegni manure at

site of work including royalty carriage for all leads and lift (cow dung

manure in stacks will be reduced by 8% for payment). 15.43 Cum Cum 490.00 Rupees Four Hundred Ninety Only 7561.00

6 Digging holes in ordinary soil and refilling the same with the excavated

earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts

of stacked volume of earth after reduction by 20% : 1 part of stacked

volume of manure after reduction by 8%) flooding with water, dressing

including removal of rubbish and surplus earth, if any, with all leads and

lifts (cost of manure, sludge or extra good earth if needed to be paid for

seperately)

a) Holes 90 cm dia and 90 cm deep 29.00 nos. each 78.00 Rupees Seventy Eight Only 2262.00

b) Holes 60 cm dia and 60 cm deep 20.00 nos. each 24.00 Rupees Twenty Four Only 480.00

7 Spreading of sludge, dump manure and/or good earth in required

thickness as per direction of officer in-charge( cost of sludge, dump

manure and/or good earth to be paid separately ). 25.25 Cum Cum 25.00 Rupees Twenty Five Only 631.00

8 Flooding the ground with water including making kiaries and dismantling

the same 44.17 Sqm.

100

Sqm 105.00 Rupees One Hundred Five Only 46.00

9 Fine dressing the ground.

350.48 Sqm.

100

Sqm 140.00 Rupees One Hundred Forty Only 491.00

10 Supply of selection-1 grass ( Lush green and free from weeds) 56.55 Sqm Sqm 86.00 Rupees Eighty Six Only 4863.00

11 Grassing with selection No. 1 grass including watering & maintenance of

the lawn for 30 days or more till the grass forms a thick lawn free from

weeds and fit for mowing including supplying good earth if needed. (The

good earth shall be paid for separately).


33/35

147


34/35

Rate

( in Fig.)

Rate

( in Words) Amount



e) Ficus panda well developed topiary plant of height 80 cm and more with

upper dia of topiary 75 cm and more in poly bag of size 35 cm X 45 cm 13.00 nos. Each 800.00 Rupees Eight Hundred Only 10400.00

f) Hemelia patens well developed of height 20 cm and more in poly bag of

size 10 cm X 15 cm 30.00 nos. Each 30.00 Rupees Thirty Only 900.00

14 Providing and planting of the following hedge plants as per direction of

site in-charge

a) Clerodendron inermii well developed plants of height 15 cm and more in

polybag 1010.00 nos. Each 9.50 Rupees Nine and Fifty Paise Only 9595.00Sub Total Rs: 57718.00

Sub Head-II : Maintenance

Complete maintenance of the garden i/c entire garden features in the

garden area i.e. lawn, trees, shrubs, hedge, Cement potted plants,flower

beds, creepers etc. i/c weeding, hoeing, pruning, replacement of plants,

gap filling, watering, mowing of lawn, hedge-clipping,application of

insecticide & pesticide, (whenever required), top dressing of lawn with

good earth and manure and maintenance of other garden related works as

directed by officer-in-charge for a period of 2 months (water etc. will beprovide by the client department).

DETAILS OF THE GARDEN AREA :-

1) LAWN AREA

i) Residential area (0.07 Acres X 2 Month)

0.14 Acres

P/acre/

month 5700.00

Rupees Five Thousand Seven

Hundred Only 798.00

2) Trees

a) Below 3 years (29 Nos X 2 Month)

58.00 Nos.

Each/

month 30.00 Rupees Thirty Only 1740.00

148


35/35

Rate

( in Fig.)

Rate

( in Words) Amount



3) Shrubs (62 Nos X 2 Month)

124.00 Nos.

Each/

month 6.20

Rupees Six and Twenty Paise

Only 769.00

4) Hedge Maintenance (504 rft X 2 Months)

1008.00 Rft.

P/rft/

month 0.60 Sixty Paise Only 605.00


Grand Total Rs: 61630.00

jupiter international salesscheduleofquantity

Documents