k-12 alliance experiencing engineering in a three dimensional lesson 1
TRANSCRIPT
1
K-12 Allia
nce
Experiencing Engineering in a Three Dimensional Lesson
2
Session GoalsExperience a 3D lesson that integrates
engineering into a learning sequence
Experience how engineering practices can be used to deepen student understanding of science and engineering
Leave with tools to begin addressing NGSS Engineering in your classrooms
3
The NGSS3 Dimensions
Practices
Crosscutting Concepts
Disciplinary Core Ideas (Content)
4
NGSS Science and Engineering Practices
1. Asking questions (science) and defining problems (engineering)
2. Developing and using models
3. Planning and carrying out investigations
4. Analyzing and interpreting data
5. Using mathematics and computational thinking
6. Constructing explanations (science) and designing solutions (engineering)
7. Engaging in argument from evidence
8. Obtaining, evaluating, and communicating information
5
SEP-Connections to the Common Core
1. Asking questions (science) and defining problems (engineering)
2. Developing and using models
3. Planning and carrying out investigations
4. Analyzing and interpreting data
5. Using mathematics and computational thinking
6. Constructing explanations (science) and designing solutions (engineering)
7. Engaging in argument from evidence
8. Obtaining, evaluating, and communicating information
6
Dimension 3: Disciplinary Core Ideas (Science Content)
Core/Component Ideas
7
Review NGSS Architecture
8
Review NGSS Connections
Connections to Common Core Standards are made and links to other grade levels are made.
9
NGSS Engineering Design PEs
10
Engineering Technology and Applications of Science (ETS)DCI’s
A. Defining and delimiting engineering problems involves stating the problem to be solved as clearly as possible in terms of criteria for success, and constraints or limits.
B. Designing solutions to engineering problems begins with generating a number of different possible solutions, then evaluating potential solutions to see which ones best meet the criteria and constraints of the problem.
C. Optimizing the design solution involves a process in which solutions are systematically tested and refined and the final design is improved by trading off less important features for those that are more important.
Handout H1
11
K-2 Engineering Grade Bands
12
3-5 Engineering Grade Bands
13
6-8 Engineering Grade Bands
14
9-12 Engineering Grade Bands
15
PEs with an Asterisk*
Handout H2
16
4th Grade DCIsCore Idea PS3.A
Definitions of Energy
PS3.B Conservation of Energy and Energy Transfer
PS3.B Conservation of Energy and Energy TransferETS1.A Defining Engineering Problems
PS3.C Relationship between Energy and Forces
Activity Conversion of Wind Energy to Mechanical Energy
DCIs The faster a given object is moving, the more energy it possesses. (4-PS3-1)
Energy can be moved from place to place by moving objects or through sound, light, or electric currents. (4-PS3-2),(4-PS3-3)
Energy can also be transferred from place to place by electric currents, which can then be used locally to produce motion, sound, heat, or light. The currents may have been produced to begin with by transforming the energy of motion into electrical energy. (4-PS3-2),(4-PS3-4)
When objects collide, the contact forces transfer energy so as to change the objects’ motions. (4-PS3-3)
ETS Possible solutions to a problem are limited by available materials and resources (constraints). The success of a designed solution is determined by considering the desired features of a solution (criteria). Different proposals for solutions can be compared on the basis of how well each one meets the specified criteria for success or how well each takes the constraints into account. (secondary to 4-PS3-4)
17
Use of Wind EnergyWith a partner, discuss how wind has been used
as a source of energy throughout human history.Grind grainPump waterMove boatsSeparate wheat chaff from grainsMove hot air balloonsTo make electricityDry clothesCool things off
18
What is a Windmill?Individually draw a model of how a
windmill works AND write an explanation of what is does and how it works
Share your ideas with a partner
19
Video of Windmillhttps://www.youtube.com/watch?v=v2_qbrbJwLI
Direct on Computer
20
Video Debrief
Based on what you saw in the video:
Revise what you drew and wrote about how a windmill works.
21
Engineering ChallengeDevelop a blade design that will lift the maximum amount of nuts in your cup to the given height
Criteria used for successLeast amount of materialsgreatest number of nutsPast the minimum height (See mark for minimum
height)
LimitationsMaterials provided
22
Explanation Poster: What You Will Construct
Based upon your investigation, develop an explanation of the relationship between blade design and the amount of mass it can raise.
Create a poster that includes a claim, evidence and reasoning that addresses
How energy is converted from one form to another
The relationship between blade design and the amount of mass it can raise
Reminder: Reasoning connects the data that you use as evidence to the claim you are making.
23
Original Blade Design Challenge
Original Idea from www.kidwind.orgMacGyver Windmill Kit
24
New Design
25
Draw FirstIndividually draw a blade design.
Get into groups of 3 or 4 and share their designs.
As a group evaluate the individual designs and then collaborate on one that the group will build
26
Build Test
ReviseRebuild Retest
27
Explanation Poster ShareBased upon your investigation, develop an explanation of the relationship between blade design and the amount of mass it can raise.
Create a poster that includes a claim, evidence and reasoning that addresses:
How energy is converted from one form to another
The relationship between blade design and the amount of mass it can raise.
(Reminder: Reasoning connects the data that you use as evidence to the claim you are making.)
Group share with another table. Is there a best design? What is it and what is the evidence and reasoning that makes it the best?
28
Three Dimensional AnalysisWith your table group:
What were the SEP’s that you used during the activity?What was the target practice of this activity?What was the DCI that we explored?Was there an application of the Cross Cutting Concepts?
Handout H3
29
Nice Additional ResourcesThis is the website with free resources related to the
trade book:
http://williamkamkwamba.typepad.com
And these are two short TED talks (5 mins each)
http://www.ted.com/talks/william_kamkwamba_on_building_a_windmill?language=en
http://www.ted.com/talks/william_kamkwamba_how_i_harnessed_the_wind?language=en
30
Debrief:
With your table groups, discuss how the integration of engineering into three dimensional lesson, impacts student learning.
31
Taking it Home - Reflection
Think about teaching and learning in your classroom.
Based on your learning today, what strategies can you incorporate in your teaching practice as you begin shifting to the NGSS to include Engineering?