k10692 rac
TRANSCRIPT
![Page 1: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/1.jpg)
Major Assignment onRefrigration & Air conditioning
Thermoelectric effect
Submitted by submitted toSagar Bhardwaj Mr. AdityaK10692 (Asst. prof. ME dept)
![Page 2: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/2.jpg)
History
• In the 1820’s Thomas Seebeck (Germany) discovered that if two metals at different temperatures were touching you could create an electric current
• Jean Peltier discovered that the opposite was also true. By sending a current through two metals you could create differences in temperature
![Page 3: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/3.jpg)
What is it?
• The thermoelectric effect is the direct conversion of temperature differences to electric voltage or vice-versa.
• The direction of heat flow can be controlled by changing polarity of the voltage source
![Page 4: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/4.jpg)
Why does this Effect Occur?
Charge Carrier Diffusion and Phonon Drag
Seebeck Effect Peltier Effect
![Page 5: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/5.jpg)
Thermoelectric Module
![Page 6: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/6.jpg)
The Zeroth Law of Thermodynamics
• Pairs of P and N type conductors are both it contact with a copper plate.
• There will thermo power until the system is at equilibrium. (All three materials are at the same temperature)
![Page 7: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/7.jpg)
Semiconductors
• Semiconductors have an electrical conductivity between materials like copper and glass
• They possess and interesting property where its conductivity increases with added temperature
• P and N type (thermocouples) semiconductors are created by doping.
![Page 8: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/8.jpg)
Applications• Thermoelectric generator• Cooling Computers• Drink Coolers• Recharging Devices• Space Probes• Solar Power• Clothing• Useful, Quiet, no Moving Parts• It is less efficient (10%) and more expensive
![Page 9: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/9.jpg)
Test for Understanding• The USB Coffee cup warmer is an example
of the Seebeck Effect or the Peltier Effect?• Before the P and N type Semiconductors
what material were used instead as thermal couples for thermoelectric modules?
• What are the advantages of using thermoelectric generators over, for example heat engines?
![Page 10: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/10.jpg)
. Principle, construction and working of Thermoelectric power generator
Heat input
Hot junction
Cold junction
P-type N-type
Heat ejection Power output
Thermoelectric power generator based on the principle of Seebeck effect that when the junctions of two different metals are maintained at different temperature, the emf is produced in the circuit
![Page 11: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/11.jpg)
• The figure shows the construction of thermoelectric power generator. • There is a burner in which the propane fuel is used as heating source in one side. • The exhaust is used to transmit a burnt fuel. • On the other side, a cold junction is kept. • The thermoelectric module (TE) (consist of number of
P- type and N-type semiconductor pellets connected in series or parallel depending on the served load)) is kept in
between the hot and cold junction. • The electrical out (load) is taken from the TE module.
![Page 12: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/12.jpg)
WorkingWhen the two sides of semiconductor are maintained with different temperature, the emf is flows across the output
circuit
N-type
V
Cold side Hot side
Heat flow
Electron flow
![Page 13: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/13.jpg)
• As the heat moves from hot side to cold side, the charge carrier moves in the semiconductor materials and hence the potential deference is created.
• The electrons are the charge carriers in the case of N-type semiconductor and Hole are in P-type semiconductors. • In a stack, number of P-type and N-type semiconductors is connected. • A single PN connection can produce a Seebeck voltage
of 40 mV. • The heat source such as natural gas or propane are used for remote power generation
![Page 14: K10692 rac](https://reader031.vdocument.in/reader031/viewer/2022011722/587fca1a1a28ab3b158b6bcb/html5/thumbnails/14.jpg)
ReferencesRockwood, Alan L. (1984). "Relationship of thermoelectricity to electronic entropy". Phys. Rev. A 30 (5): 2843–4. Bibcode 1984PhRvA..30.2843R. doi:10.1103/PhysRevA.30.2843
G. Jeffrey Snyder and Eric S. Toberer "Complex Thermoelectric Materials" Nature Materials 7, 105-114 (2008).
CRC Handbook of Thermoelectrics, Introduction, Edited by D.M. Rowe, CRC Press, 1995.
G. Jeffrey Snyder, Tristan Ursell. "Thermoelectric efficiency and compatibility" Physical Review Letters, Vol 91 p. 148301 (2003)