k28601_web gpi user manual
TRANSCRIPT
-
8/10/2019 k28601_Web GPI User Manual
1/126
WebGPI
Communication
Software
User Manual
-
8/10/2019 k28601_Web GPI User Manual
2/126
WebGPI Communication Software
User Manual
About this Manual
Organization
and Headings
To help you quickly find information in this manual, the material is divided into sections,
topics, subtopics, and details, with descriptive headings set in red type. Section titles
appear at the top of every page in large red type.
In the PDF version of this document, clicking an item underlined in blue italic typejumps
you to the referenced page in the document.
Special Text Formatting Controls and indicators are set in bold black type.
Table of Contents A Table of Contents (TOC) appears on the next page. In the PDF version of this document,
the TOC entries are hyperlinked.
Revision history
Revision Date Comment
Rev. EA December 2009 WebGPI Rev. 3.1.x
Rev. FA July 2010 WebGPI Rev. 3.2.x
Rev. FB November 2012 WebGPI Rev. 4.0.x
2012 Sauer-Danfoss. All rights reserved.
Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products already
ordered provided that such alterations can be made without affecting agreed specifications.
All trademarks in this material are properties of their respective owners.
WebGPI, WebGPI-Log, and Sauer-Danfoss are trademarks of the Sauer-Danfoss Group. The Sauer-Danfoss logotype
is a trademark of the Sauer-Danfoss Group.
2 K28601FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
3/126
WebGPI Communication Software
User Manual
Contents
Introduction ........................................................................................................................................................... 5
About this Manual ...................................................................................................................................... . 6
About the WebGPI and Web-GPI-Log Applications ....................................................................... 6
WebGPI Application ............................................................................................................................................ 7
WebGPI Window .......................................................................................................................................... 8
Menu Bar...................................................................................................................... ........................... 9
Toolbar ....................................................................................................................... ...........................11
About the View Menu ..............................................................................................................................13
Normal View ........................................................................................................................................13
Main View ..................................................................................................................... ........................14
Data Logging View ...........................................................................................................................15
Main 50% View ...................................................................................................................................16
File Creation Window ...............................................................................................................................17
Downloader Pane ......................................................................................................................................19
About File Names ......................................................................................................................................21
Application File Names ...................................................................................................................21
Default File Names ............................................................................................................................21
Kernel File Names ..............................................................................................................................21
Configuration Pane ...................................................................................................................................22
Offline Window...........................................................................................................................................23
Offline Window Chart Menu Bar ....................................... .......................................................... 24
Offline Window Chart Toolbar .....................................................................................................26
Information Window ................................................................................................................................28
Debug Mode Pane ....................................................................................................................................29
Data Logging Pane ...................................................................................................................................30Data Logging Pane Toolbar ..........................................................................................................31
Data Logging Pane Chart Menu Bar ..........................................................................................32
Data Logging Pane Chart Toolbar ..............................................................................................34
WebGPI-Log Application ................................................................................................................................37
WebGPI-Log Window ...............................................................................................................................38
WebGPI-Log Window Toolbar......................................................................................................39
Data Logging Pane ...........................................................................................................................42
How to Use the WebGPI Application .........................................................................................................47
How to Connect Your PC to a Microcontroller ...............................................................................48
How to Start Communication between the WebGPI Application and a Microcontroller
..........................................................................................................................................................................49
How to Change a Parameter Value .....................................................................................................50
How to Restore Defaults .........................................................................................................................52
How to Log Run-Time Data ...................................................................................................................53
About Selecting Values for Logging ..........................................................................................56
How to Create an XML Data Log File for Use in the WebGPI-Log Application .................. 57
How to Download a Defaults or Application File to an HC08 or HC08A Processor ......... 59
K28601Rev FB November 2012 3
-
8/10/2019 k28601_Web GPI User Manual
4/126
WebGPI Communication Software
User Manual
Contents
How to Force Download an Application File to an HC08 or HC08A Processor .................61
How to Download a Kernel to an HCO8 or an HC08A Processor ............................................64
How to Force Download a Kernel to an HCO8 or HC08A Processor ......................................68
How to Download an Application File to a 196 Processor ........................................................72
How to Force Download an Application File to a 196 Processor ............................................75
How to Download a Kernel to a 196 Processor ..............................................................................78
How to Force Download a Kernel to a 196 Processor .................................................................82
How to Download an Application or Defaults File to a 167 Processor .................................86
How to Force Download an Application File to a 167 Processor ............................................88
How to Download a Kernel to a 167 Processor ..............................................................................91
How to Force Download a Kernel to a 167 Processor .................................................................94
How to Download an Application File to an HC12 Processor ..................................................98
How to Download a Kernel to an HC12 Processor .................................................................... 102
How to Force Download a Kernel to an HC12 Processor ........................................................ 105
How to Create a File with Microcontroller Data ......................................................................... 108
How to Download an Application File to a TI Processor ......................................................... 110
How to Use the WebGPI-Log Application ............................................................................................. 113
How to Log and Save Data .................................................................................................................. 114
How to Create a Chart Collection ..................................................................................................... 117
PC and Cabling Requirements ................................................................................................................... 121
PC Requirements ............................................................................................. ....................................... 121
Cabling Requirements ............................................................................................................... ........... 121
Index ........................................................................................................................................... ......................... 123
4 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
5/126
WebGPI Communication Software
User Manual
Introduction
This manual documents the WebGPI application and the supplemental WebGPI-Log
application.
This chapter introduces the WebGPI and the WebGPI-Log applications.
T If you are updating your WebGPI application, first uninstall any older versions from yourPC.
K28601Rev FB November 2012 5
-
8/10/2019 k28601_Web GPI User Manual
6/126
WebGPI Communication Software
User Manual
Introduction
About this Manual
This manual contains the following chapters:
Introduction(this chapter)Introduces the WebGPI and WebGPI-Log applications.
WebGPI Application describes this applications windows and their controls and
indicators.
WebGPI-Log Application describes this applications windows and their controls and
indicators.
How to Use the WebGPI Application has step-by-step instructions for performing
common WebGPI application tasks.
How to Use the WebGPI-Log Application has step-by-step instructions to log data at
higher rates than can be achieved using the WebGPI applications logging function.
PC and Cabling Requirements details PC and cabling requirements.
About the WebGPI and Web-GPI-Log Applications
The WebGPI application is a browser-based (Web), general-purpose interface (GPI)
software tool for servicing Sauer-Danfoss microcontrollers.
You can use the WebGPI application to:
Download default tuning values, applications, and kernels (operating systems) to
microcontrollers.
Upload tuning values from microcontroller applications and create default tuningvalue files containing these values.
View and change microcontroller application values.
Log and plot microcontroller application values.
Troubleshoot and debug microcontroller applications.
The WebGPI-Log application is a high-speed data-logging tool. The WebGPI-Log
application data acquisition rates are typically twice as fast as the WebGPI application
rates The WebGPI-Log application installs along with the WebGPI application.
6 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
7/126
WebGPI Communication Software
User Manual
Chapter contents
WebGPI Application
This chapter describes the windows, controls, and indicators in the WebGPI application.
T The screen captures shown in this chapter may differ slightly from the screens in yourversion of the WebGPI application.
WebGPI Window .......................................................................................................................................... 8
About the View Menu ..............................................................................................................................13
File Creation Window ...............................................................................................................................17
Downloader Pane ......................................................................................................................................19
About File Names ......................................................................................................................................21
Configuration Pane ...................................................................................................................................22
Offline Window...........................................................................................................................................23
Information Window ................................................................................................................................28Debug Mode Pane ....................................................................................................................................29
Data Logging Pane ...................................................................................................................................30
K28601Rev FB November 2012 7
-
8/10/2019 k28601_Web GPI User Manual
8/126
WebGPI Communication Software
User Manual
WebGPI Application
WebGPI Window
Path: Startmenu > Programs>WebGPI> WebGPI
The Sauer-Danfoss WebGPIwindow displays when you start the WebGPI application. The
controls in this window access application functions and display application information.
WebGPI Window
Item Description
Menu bar Accesses WebGPI application functions and displays application information.
For more information, seeMenu Baron page9.
Toolbar Provides quick access to major WebGPI application functions and display important application information.
For more information, seeToolbaron page11.
Main pane The panes that display here enable you to view, change, and log microcontroller application values.
For more information, seeAbout the View Menuon page13.
8 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
9/126
WebGPI Communication Software
User Manual
WebGPI Application
Menu Bar
The Menu bar accesses WebGPI application functions and information.
T The Toolbar duplicates many Menu bar selections.
Menu Bar
Item Description
File Commands in this menu create and download microcontroller files.
Save Displays the File Creationwindow.
This window creates default tuning value files and data logging files for the WebGPI-Log application.
Download Displays the Downloaderpane.
This pane downloads application files, default tuning values files, and kernel (operating system) files to
microcontrollers.
Communication The commands in this menu control communication between the WebGPI application and the microcontroller.
Configuration Displays the Configurationpane.Use this pane to configure the COM port on your PC that communicates with the microcontroller.
Clicking Disconnectand closing communication with the microcontroller makes this command available.
Connect/
Disconnect
Opens and closes communication between the WebGPI application and the microcontroller.
Tools This menus command plots data that you have logged and saved.
Graph Displays the Open Real Time Performancewindow.
Use this window to chart (plot) data that you have logged and saved.
Information The commands in this menu display information about the microcontroller application and open an Adobe
Acrobat portable document format (PDF) version of the microcontroller application manual.
Info Screen Displays the Settings and System Infowindow.
This window displays information specific to the microcontroller hardware and application. Not all applications
have this window.
User Manual Opens a PDF version of the microcontroller application manual. Not all applications have a manual.
K28601Rev FB November 2012 9
-
8/10/2019 k28601_Web GPI User Manual
10/126
WebGPI Communication Software
User Manual
WebGPI Application
Menu Bar
Item Description
Help The commands in this menu open the WebGPI manual and access the Sauer-Danfoss home page.
WebGPI Manual Opens a PDF version of this WebGPI User Manual.
Sauer-Danfoss
WebPage
Opens the Sauer-Danfoss home page if you have an active internet connection.
10 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
11/126
WebGPI Communication Software
User Manual
WebGPI Application
Toolbar
Toolbar buttons and controls provide quick access to WebGPI application functions.
T The Menu bar duplicates many Toolbar selections.
Toolbar
Item Description
Displays the File Creationwindow.This window creates default tuning value files. It also creates files that define the data to be logged in the WebGPI-Log
application.
Displays the Downloaderpane.
This pane manages downloads to microcontrollers.
Connectopens communication between the WebGPI application and the microcontroller.
Disconnectcloses communication between the WebGPI application and the microcontroller.
Starts communication between the WebGPI application and the microcontroller.
The WebGPI application automatically loads the microcontroller application interface once communication begins.
Displays Debug Modepane.
This pane directly sets microcontroller inputs and output values. It allows you to bypass the microcontrollerapplication for troubleshooting purposes.
Not all microcontroller applications have a debug mode.
Displays the Settings and System Infowindow.
This window displays information that is specific to the microcontroller hardware and application.
Not all microcontroller applications have this window.
Selects an application for review when you are not connected to a microcontroller.
Disconnecting from a microcontroller makes this button available.
Decreases or increases text and graphic sizes in selected panes.
Toggles the view between the current view and the previous view.
Portselects the RS 232-C port that the WebGPI application uses to communicate with the microcontroller.
Baudrateselects the data transmission rate between the WebGPI application and the microcontroller.
Microcontrollers that use Motorola 68HC08 and 68HC08A processors automatically connect at 9600 baud.
Microcontrollers that use Infineon 167 and Intel 196 processors automatically connect at 19200 baud.
Baudratereplaces Portwhen you connect to the microcontroller.
K28601Rev FB November 2012 11
-
8/10/2019 k28601_Web GPI User Manual
12/126
WebGPI Communication Software
User Manual
WebGPI Application
Toolbar
Item Description
Changes views in the WebGPI window. For more information, seeAbout the View Menuon page13.
Displays the following information when you connect to the microcontroller:
Software-P/Ndisplays the microcontroller application software part number.
Hardware-IDdisplays the microcontroller hardware identification number.
Machine Default ID-Numberdisplays the default tuning value set identification number.
OS Versiondisplays the version of the kernel used in the microcontroller processor.
Status indicators Show the current WebGPI application status.
The WebGPI application is not connected to the microcontroller.
The WebGPI application is connected to the microcontroller.
The microcontroller application interface is open.
The WebGPI application is creating a hexadecimal format file (*.hex) containing current microcontroller tuning values.
The WebGPI application is creating a C format header file (*.h) with the current microcontroller application tuning
values.
The WebGPI application is creating an extensible markup language file that contains the current microcontroller
tuning values (*.xml).
The WebGPI application is downloading a file to the microcontroller.
12 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
13/126
WebGPI Communication Software
User Manual
WebGPI Application
About the View MenuThe pull-down Viewmenu lets you select between Normal, Main, Data Logging, and
Main 50%views.
Normal View
The Normalview splits the WebGPI window into a Navigation pane and a Parameter pane.
The Navigation pane lists all the parameter sets used in the microcontroller
application. Folders organize similar parameter sets.
The Parameter pane displays parameter sets. Click in the Navigation pane to select a
parameter set for display.
Use these panes to view and change parameter values when you are connected to a
microcontroller.
Use these panes to review parameters when you are not connected to a
microcontroller. You can view a sample set of parameters but not change their values.
K28601Rev FB November 2012 13
-
8/10/2019 k28601_Web GPI User Manual
14/126
WebGPI Communication Software
User Manual
WebGPI Application
Main View
TheMainview displays a single Main pane, typically used to view block diagrams.
14 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
15/126
WebGPI Communication Software
User Manual
WebGPI Application
Data Logging View
The Data Loggingview displays the Data Logging pane.
Use this pane to log and plot application values in real time.
Use the controls in this pane to start and stop data logging, save data for offlineviewing, and change the appearance of data logging charts.
K28601Rev FB November 2012 15
-
8/10/2019 k28601_Web GPI User Manual
16/126
WebGPI Communication Software
User Manual
WebGPI Application
Main 50% View
The Main 50%view splits the WebGPI window horizontally, with the Data Logging paneinitially taking up the lower 50% of the window.
16 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
17/126
WebGPI Communication Software
User Manual
WebGPI Application
File Creation Window
This window creates default tuning value files. It also creates files that define the data to
be logged in the WebGPI-Log application.
File Creation Window
Item Description
Default value from Micro The HEADER, HEX, and XMLselections become available when the WebGPI application connects to the
microcontroller application.
HEADERselect to create a C header file (*.h) with the current microcontroller application tuning values.
Sauer-Danfoss can use this file as the source for default tuning values when it compiles a new version of the
microcontroller application.
HEXselect to create a hexadecimal file (*.hex) with the current microcontroller application tuning values.
The values in this file become the default tuning values when you download this file to a microcontroller application.
This selection makes the Machine Default Identification Numberavailable.
XMLselect to create an extensible markup language file (*.xml) with the current microcontroller application tuning
values.
Use this file format to store tuning values. You can use these files to create HEADERand HEXfiles without a
connection to the microcontroller application.
XML (Datalogging)select to create an xml data log f ile (*.xml). An xml data log file identifies values to be logged in
the WebGPI-Log application.
K28601Rev FB November 2012 17
-
8/10/2019 k28601_Web GPI User Manual
18/126
WebGPI Communication Software
User Manual
WebGPI Application
File Creation Window
Item Description
Default value from XML-
File
Creates C header files (*.h) and hexadecimal files (*.hex) containing tuning values from a selected xml source file.
HEADERselect to create a C header file from a selected xml format source file.
HEXselect to create a hexadecimal file from a selected xml format source file.
The values in this hexadecimal file become the default tuning values when you download this file to a microcontroller
application.
The HEXselection makes the Machine Default Identification Numberavailable.
Search Displays a Select Filewindow.
Use this window to select the xml file that contains the tuning values for the HEADERor HEXfile that you are
creating.
Machine DefaultIdentification Number
Enters the suffix appended to the microcontroller application file name that identifies the default tuning value set.
Search Displays a Select Filewindow.
Use this window to name the file you are saving or to overwrite an existing file.
Create Creates the file.
18 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
19/126
-
8/10/2019 k28601_Web GPI User Manual
20/126
WebGPI Communication Software
User Manual
WebGPI Application
Downloader Pane
Item Description
File type Applicationdisplays the controls needed to download a microcontroller application.
Kerneldisplays the controls needed to download a kernel (the core of a microcontroller operating system).
Defaultsdisplays the controls needed to download a tuning parameter defaults file.
File name filterapplies a filter in the Select Filewindow that displays only files appropriate for your File type
download selection and Microcontroller typeselection
This filter works with file names that conform to the Sauer-Danfoss naming convention. For more information, see
About File Nameson page21.
File Checkcheck to have the WebGPI application verify that the file is suitable for the microcontroller processor type
before downloading it.
Empty Security bytecheck when downloading a kernel to a 68HC08 or 68HC08A processor that has never been
programmed. Typically, this is not used.
Search
(for application, kernel,
and defaults files)
Displays a Select Filewindow.
Use this window to select an application, kernel, or defaults file to download.
The text box to the left of Searchidentifies the name and location of the file.
Search
(for boot files)
Displays a Select Filewindow.
Use this window to select the boot file required to download a kernel.
The text box to the left of Searchidentifies file type, f ile location, and name of the selected file.
Selecting Kerneland a Microcontroller typeof HC08, 167, HC08A, or 164makes this button available.
Force download/
Stop forcing download
Forces a connection to the microcontroller.
The button becomes available when the WebGPI application cannot normally connect to the microcontroller.
Boot-file download Starts the download of a boot file.
Selecting Kerneland a Microcontroller typeof HC08, 167, HC08A, or 164makes this button available.
Download Starts a download of an application or kernel file.
Instruction Displays instructions to help you download files.
Progress indicator Identifies the defaults, application, and kernel used in the microcontroller.
During a download, it indicates the progress of the download.
20 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
21/126
WebGPI Communication Software
User Manual
WebGPI Application
About File NamesSauer-Danfoss adopted the following format in March 2002 for application, default, and
kernel file names.
The Downloaderpanes File name filterworks with file names that follow this format.
With File name filter checked, the Select Filewindow displays only files appropriate foryour download selection and processor type.
Application File Names
Microcontroller application file names use the format shown above.
Default File Names
Microcontroller application default tuning file names use the format shown above.
Kernel File Names
Kernel file names use the format shown above.
K28601Rev FB November 2012 21
-
8/10/2019 k28601_Web GPI User Manual
22/126
WebGPI Communication Software
User Manual
WebGPI Application
Configuration Pane
Path:Communicationmenu > Configuration
This pane configures the COM port that WebGPI application uses to communicate with
the microcontroller.
T To display this pane, first disconnect the WebGPI application from the microcontroller.
Configuration Pane
Item Description
RS232 Configures the RS-232-C COM port that the WebGPI application uses to communicate with the microcontroller.
Connection timeout Sets the time that the WebGPI application waits for a response indicating a successful initial connection before trying
another baud rate.
The WebGPI application displays an alert message if all connection attempts fail.
Standard timeout Sets the time that the WebGPI application waits for a response during normal operation before trying another baud rate.
The WebGPI application displays an alert message if all connection attempts fail.
Input buffer size Sets the input buffer size.
Output buffer size Sets the output buffer size.
User Name Not implemented in this release.
Application Name Not implemented in this release.
22 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
23/126
WebGPI Communication Software
User Manual
WebGPI Application
Offline WindowPath: Toolsmenu > Graph
This window displays charts of data that you have logged and saved.
T Use the Data Loggingpane (page30)to log data when you are connected to amicrocontroller.
Offline Window
Item Description
Chart menu bar Commands in this menu bar format charts.
Chart toolbar Buttons in this toolbar format charts.
Chart area Displays charts of data that you have logged and saved.
K28601Rev FB November 2012 23
-
8/10/2019 k28601_Web GPI User Manual
24/126
WebGPI Communication Software
User Manual
WebGPI Application
Offline Window Chart Menu Bar
Commands in this menu bar format charts.
Offline Window Chart Menu Bar
Menu Description
File Open Chartcommanddisplays the Openwindow. Use this window to select and open a ChartFX *cfx format file.
Save Chartcommanddisplays the Save As window. Use this window to save a chart in the ChartFX *cfx file format.
Page Setupcommanddisplays the Page Setupwindow. Use this window to set the charts print margins and paper
orientation.
Print commanddisplays the Printwindow. Use this window to print out the chart.
Copy to Clipboard As a Bitmapcommandcopies a bitmap image of the chart to the clipboard.
As a Metafilecommandcopies a Windows Metafile image of the chart to the clipboard.
As Text (data only)commandcopies tab-delimited chart data points to the clipboard.
View 3D/2Dcommandswitches between two-dimensional and three-dimensional chart views.
Clustered (Z Axis)commandclusters the chart along its z axis.
PropertiescommandDisplays a Propertieswindow with the following tabs:
Y Axis tabsets labeling, tick marks, and gridlines for the y axis.
Seriestabdefines the display and formatting of series.
Generaltabsets general properties such as the screen title and screen background colors.
Tools Values LegendcommandDisplays a values legend.
Series LegendcommandDisplays a series legend.
User LegendcommandDisplays a user legend.
Data Editorcommanddisplays a table at the bottom of the chart.
This table shows the value and acquisition time of each data point in the chart.
Use the slider bar to access data points in the chart and in the table.
Changing a data point value in the table also changes the data point in the chart.
Toolbarcommandhides the toolbar.
To restore the toolbar, right-click the chart. In the pop-up menu that displays, click Toolbar.
Menucommandhides the menu bar. To restore the menu bar, close and reopen the chart.
24 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
25/126
WebGPI Communication Software
User Manual
WebGPI Application
Offline Window Chart Menu BarMenu Description
Help Contentscommanddisplays the contents of the help file.
Searchcommandsearches the help file.
About ChartFXcommanddisplays information about ChartFX software.
K28601Rev FB November 2012 25
-
8/10/2019 k28601_Web GPI User Manual
26/126
WebGPI Communication Software
User Manual
WebGPI Application
Offline Window Chart Toolbar
Buttons in this toolbar format charts.
Offline Window Chart Toolbar Buttons
Button Name Description
Personalized Charts Displays a menu with commands that save and apply chart settings.
Load My Chartcommandapplies the chart settings that have been saved through the Save My Chart
command to the currently displayed chart.
Save My Chartcommandsaves the chart settings that are applied to the current chart.
Restore Defaultscommandapplies the default settings to the currently displayed chart.
Copy to Clipboard Displays a menu with copy commands.
As a Bitmapcommandcopies a bitmap image of the chart to the clipboard.
As a Metafilecommandcopies a Windows Metafile image of the chart to the clipboard.
As Text (data only)commandcopies tab-delimited chart data points to the clipboard.
Print Displays a Printwindow. Use this window to print the chart.
Gallery Displays a palette with line, bar, and other chart types. Click a selection to change the way data displays.
Anti-Aliasing Applies anti-aliasing to smooth the display of chart lines.
Palette Selector Displays a palette with color schemes that can be applied to charts.
Click a color scheme to apply the scheme to the chart.
3D/2D Switches between two-dimensional and three-dimensional chart views.
Selecting a three-dimensional chart view enables the Rotated View button.
Rotated View Rotates the chart along its z axis.
Selecting a rotated chart view enables the Rotate Around Y Axis and Rotate Around X Axis buttons.
Rotate Around YAxis
Rotates the chart around its y axis.
Rotate Around X
Axis
Rotates the chart around its x axis.
Clustered (Z Axis) Clusters the chart along its z axis.
26 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
27/126
WebGPI Communication Software
User Manual
WebGPI Application
Offline Window Chart Toolbar ButtonsButton Name Description
Axes Settings Displays a menu with commands that change how the x axis and y axis display.
Gridcommandsturns on and off tick mark grid lines.
Interlacedcommandapplies alternate light and dark (interlaced) backgrounds between y-axis tick marks.
Show Labelscommandlabels x-axis tick marks.
Staggeredcommandstaggers the labels applied to the x-axis tick marks.
Vertical labelscommandrotates by 90 the labels applied to the x-axis tick marks.
Optionscommanddisplays a Propertieswindow with the following tabs:
Y Axis tabsets labeling, tick marks, and gridlines for the y axis.
Seriestabdefines the display and formatting of series.
Generaltabsets general properties such as the screen title and screen background colors.
Point Labels Applies labels to each data point in the chart.
Data Editor Displays a table at the bottom of the chart.
This table shows the value and acquisition time of each data point in the chart.
Use the slider bar to access data points in the chart and in the table.
Changing a data point value in the table also changes the data point in the chart.
Legend Box Displays legends that identify the chart data.
Zoom Enables a zoom tool.
Click and drag in the chart to zoom in on specific areas. Click on the button to zoom out.
Properties Displays a Propertieswindow with the following tabs:
Y Axis tabsets labeling, tick marks, and gridlines for the y axis.
Seriestabdefines the display and formatting of series.
Generaltabsets general properties such as the screen title and screen background colors.
K28601Rev FB November 2012 27
-
8/10/2019 k28601_Web GPI User Manual
28/126
WebGPI Communication Software
User Manual
WebGPI Application
Information Window
Path: Informationmenu > Info Screen
Use this window to view information about the microcontroller application and its
hardware.
The type of microcontroller application determines the type of information displayed. Notall applications have this window.
T You must connect to the microcontroller to view hardware information.
28 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
29/126
WebGPI Communication Software
User Manual
WebGPI Application
Debug Mode Pane
This pane allows you to view microcontroller inputs and directly set microcontroller
outputs when the WebGPI application is in the debug mode.
Clicking IO Testputs the WebGPI application in a troubleshooting debug mode that
bypasses the microcontroller application. To enter the debug mode, you must connect to
the microcontroller without opening the microcontroller application interface.
WarningThe debug mode directly applies output values. It bypasses fault and limit protections.
Changing outputs can cause sudden and unexpected machinery movements that can
result in personal injury and equipment damage.
Understand the consequences of changing microcontroller outputs. Be prepared for sudden
vehicle and machinery movements.
K28601Rev FB November 2012 29
-
8/10/2019 k28601_Web GPI User Manual
30/126
WebGPI Communication Software
User Manual
WebGPI Application
Data Logging Pane
Viewmenu > Data Loggingor Main 50%
Use this pane to plot and save run-time data when you are connected to a microcontroller
application.
Data Loggingcontrols are the same whether your Viewmenu selection is Mainor Main
50%.
T The WebGPI-Log application can log data at much higher acquisition rates than thelogging function described here.
Data Logging Pane
Item Description
Data logging toolbar Controls in this toolbar start and stop data logging and set data acquisition parameters such as the update time and
the logging time.
Chart menu bar Commands in this menu bar format charts.
Chart toolbar Buttons in this toolbar format charts.
Chart area Displays a chart of the data that you are logging.
30 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
31/126
-
8/10/2019 k28601_Web GPI User Manual
32/126
WebGPI Communication Software
User Manual
WebGPI Application
Data Logging Pane Chart Menu Bar
Commands in this menu bar format charts.
Data Logging Pane Chart Menu Bar
Menu Description
File Open Chartcommanddisplays the Openwindow. Use this window to select and open a ChartFX *cfx format file.
Save Chartcommanddisplays the Save As window. Use this window to save a chart in the ChartFX *cfx format f ile.
Page Setupcommanddisplays the Page Setupwindow. Use this window to set the charts print margins and paper
orientation.
Print commanddisplays the Printwindow. Use this window to print out the chart.
Copy to Clipboard As a Bitmapcommandcopies a bitmap image of the chart to the clipboard.
As a Metafilecommandcopies a Windows Metafile image of the chart to the clipboard.
As Text (data only)commandcopies tab-delimited data points from the chart to the clipboard.
View 3D/2Dcommandswitches between two-dimensional and three-dimensional chart views.
Clustered (Z Axis)commandclusters the chart along its z axis.
Propertiescommanddisplays a Propertieswindow with the following tabs:
Y Axis tabsets labeling, tick marks, and gridlines for the y axis.
Seriestabdefines the display and formatting of series.
Generaltabsets general properties such as the screen title and screen background colors.
Tools Values LegendcommandDisplays a values legend.
Series LegendcommandDisplays a series legend.
User LegendcommandDisplays a user legend.
Data Editorcommanddisplays a table at the bottom of the chart.
This table shows the value and acquisition time of each data point in the chart.
Use the slider bar to access data points in the chart and in the table.
Changing a data point value in the table also changes the data point in the chart.
Toolbarcommandhides the toolbar. To restore the toolbar, right-click the chart. In the pop-up menu that displays, click
Toolbar.
Menucommandhides the menu bar. To restore the menu bar, close and reopen the chart.
32 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
33/126
-
8/10/2019 k28601_Web GPI User Manual
34/126
WebGPI Communication Software
User Manual
WebGPI Application
Data Logging Pane Chart Toolbar
Buttons in this toolbar format charts.
Data Logging Pane Chart Toolbar Buttons
Button Name Description
Personalized Charts Displays a menu with commands that save and apply chart settings.
Load My Chartcommandapplies the chart settings that have been saved through the Save My Chart
command to the currently displayed chart.
Save My Chartcommandsaves the chart settings that are applied to the current chart.
Restore Defaultscommandapplies the default settings to the currently displayed chart.
Copy to Clipboard Displays a menu with copy commands.
As a Bitmapcommandcopies a bitmap image of the chart to the clipboard.
As a Metafilecommandcopies a Windows Metafile image of the chart to the clipboard.
As Text (data only)commandcopies tab-delimited chart data points to the clipboard.
Print Displays a Printwindow. Use this window to print the chart.
Gallery Displays a palette with line, bar, and other chart types. Click a selection to change the chart type.
Anti-Aliasing Applies anti-aliasing to smooth the display of chart lines.
Palette Selector Displays a palette with color schemes that can be applied to charts.
Click a color scheme to apply the scheme to the chart.
3D/2D Switches between two-dimensional and three-dimensional chart views.
Selecting a three-dimensional chart view enables the Rotated View button.
Rotated View Rotates the chart along its z axis.
Selecting a rotated chart view enables the Rotate Around Y Axis and Rotate Around X Axis buttons.
Rotate Around YAxis
Rotates the chart around its y axis.
Rotate Around X
Axis
Rotates the chart around its x axis.
Clustered (Z Axis) Clusters the chart along its z axis.
34 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
35/126
WebGPI Communication Software
User Manual
WebGPI Application
Data Logging Pane Chart Toolbar ButtonsButton Name Description
Axes Settings Displays a menu with commands that change how the x axis and y axis display.
Gridcommandsturns on and off tick mark grid lines.
Interlacedcommandapplies alternate light and dark (interlaced) backgrounds between y-axis tick marks.
Show Labelscommandlabels x-axis tick marks.
Staggeredcommandstaggers the labels applied to the x-axis tick marks.
Vertical labelscommandrotates by 90 the labels applied to the x-axis tick marks.
Optionscommanddisplays a Propertieswindow with the following tabs:
Y Axis tabsets labeling, tick marks, and gridlines for the y axis.
Seriestabdefines the display and formatting of series.
Generaltabsets general properties such as the screen title and screen background colors.
Point Labels Applies labels to each data point in the chart.
Data Editor Data Editorcommanddisplays a table at the bottom of the chart.
This table shows the value and acquisition time of each data point in the chart.
Use the slider bar to access data points in the chart and in the table.
Changing a data point value in the table also changes the data point in the chart.
Legend Box Displays legends that identify the chart data.
Zoom Enables a zoom tool.
Click and drag in the chart to zoom in on specific areas. Click on the button to zoom out.
Properties Displays a Propertieswindow with the following tabs:
Y Axis tabsets labeling, tick marks, and gridlines for the y axis.
Seriestabdefines the display and formatting of series.
Generaltabsets general properties such as the screen title and screen background colors.
K28601Rev FB November 2012 35
-
8/10/2019 k28601_Web GPI User Manual
36/126
WebGPI Communication Software
User Manual
WebGPI Application
(This page is intentionally blank.)
36 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
37/126
WebGPI Communication Software
User Manual
Chapter contents
WebGPI-Log Application
This chapter describes the WebGPI-Log applications windows and their controls and
indicators.
The WebGPI-Log application data acquisition rates are typically twice as fast as the
WebGPI application rates.
T The screen captures shown in this chapter may differ slightly from the screens in yourversion of the WebGPI-Log application.
WebGPI-Log Window .......................................................................................................................................38
WebGPI-Log Window Toolbar ......................................................................................................................39
Data Logging Pane .................................................................................................................... ........................42
K28601Rev FB November 2012 37
-
8/10/2019 k28601_Web GPI User Manual
38/126
WebGPI Communication Software
User Manual
WebGPI-Log Application
WebGPI-Log Window
Path:Startmenu > Programs> WebGPI> WebGPI-Log
This window opens when you start the WebGPI-Log application. Use the controls in thiswindow to access application functions.
WebGPI-Log Window
Item Description
Data Logging pane Once you select data to log, this pane displays a chart of the data and Chart menu and a Chart toolbar to format the data.
Toolbar Buttons and controls provide quick access to WebGPI-Log application functions.
38 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
39/126
WebGPI Communication Software
User Manual
WebGPI-Log Application
WebGPI-Log Window Toolbar
Toolbar buttons and controls provide quick access to WebGPI-Log application functions.
WebGPI-Log Toolbar
Item Description
Connect buttonopens communication between the WebGPI-Log application and the microcontroller.
Disconnect buttoncloses communication between the WebGPI-Log application and the microcontroller.
Starts communication between the microcontroller and the WebGPI application on the selected RS 232-C port.
Click the Disconnectbutton to make this control available.
Selects the data transmission rate between the WebGPI-Log application and the microcontroller.
The WebGPI-Log application automatically selects the optimum rate.
After you connect to the microcontroller, items in this pull-down menu can display the following information:
Software-P/Ndisplay the microcontroller application software part number.
Hardware-IDdisplay the microcontroller hardware identification number.
Machine Default ID-Numberdisplay the default tuning value set identification number.
OS Versiondisplay the version of the kernel (operating system) used in the microcontroller.
EC-Processor typedisplay the processor type used in the microcontroller.
Shows the name of the currently selected screen collection.
Start Loggingbuttonstarts the data logging process.
To make the Start Loggingbutton available, you must connect to the microcontroller and select a screen file
(data logging file) to write data to.
Stop Loggingbuttonstops the data logging process.
Shows the data acquisition rate.
Sets how many minutes of pre-trigger data log when a trigger event occurs.
K28601Rev FB November 2012 39
-
8/10/2019 k28601_Web GPI User Manual
40/126
WebGPI Communication Software
User Manual
WebGPI-Log Application
WebGPI-Log Toolbar
Item Description
Sets how many minutes of data are written to a buffer.
The buffer is circular. When the buffer fills, the newest data overwrites the oldest data. Data logging continues
until you click Stop Logging.
When a data trigger occurs, logging continues until new data (including any Pretrigger timedata) fills the data
buffer. Then data logging stops.
Filemenu > Save Chartwrites the contents of the buffer to a ChartFX *.chd format file.
Click to display two additional buttons:
Edit Collectionbuttonopens the Edit Chart Collection List window. This window lists the xml data log
files in the currently selected chart collection. Use this window to add and remove xml data log files f rom the
chart collection.
You create xml data log files in the WebGPI applications File CreationwindowAdd Chartbuttonopens the
Add Chart to Collectionwindow. Use this window to add xml data log files to the currently selected chart
collection.
Click to display the:
Newbuttonopens the Create New Chart Collectionwindow. Use this window to name a new chart
collection.
Openbuttonopens the Open Chart Collectionbutton. Use this window to select and open a chart
collection.
Savebuttondisplays the Save Chart Collectionbutton. Use this window to save a chart collection
Click this button to save changes made in the Edit Chart List Collectionwindow.
Displays information about the WebGPI-Log application and Sauer-Danfoss.
About XML Data Log Files, Chart Collections, and ChartFX Files
XML data log files are extensible mark-up language files (*.xml) that:
You create in the WebGPI applications File Creationwindow.
Define the data to be logged, but do not contain data.
Chart collections:
Contain sets of xml data log files.
Have *.gpi extensions.
ChartFX (*.chd) files:
Define the formatting of the logged data.
Store the data that has been logged.
40 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
41/126
WebGPI Communication Software
User Manual
WebGPI-Log Application
Edit Chart Collection List Window
This window lists the xml data log files in the currently selected chart collection. Use this
window to add and remove xml data log files from the chart collection.
T The Closebutton temporarily applies the changes made in this window to the chart
collection displayed in the WebGPI-Logwindow. Click the Collectionbutton > Savebutton in the WebGPI-Logwindow to make changes permanent.
Edit Chart Collection List Window
Item Description
Chart collection list Lists the xml data log files in the chart collection.
You create these xml data log files in the WebGPI applications File Creationwindow. They define the data to be
logged.
Add Chartbutton Opens the Add Chart to Collectionwindow.
Use this window to select xml data log file to the chart collection.
Remove Chartbutton Temporarily removes an xml data log file from the chart collection.
Close button Closes the Edit Chart Collectionwindow and applies the changes made in this window to the chart displayed in the
data logging pane.
Click the Collection> Savebuttons to save any changes made in the Edit Chart Collectionwindow.
K28601Rev FB November 2012 41
-
8/10/2019 k28601_Web GPI User Manual
42/126
WebGPI Communication Software
User Manual
WebGPI-Log Application
Data Logging Pane
This pane displays a chart of the data you selected to log, along with a Chart menu and
toolbar to format the display of data.
T The Chart menu, Chart toolbar, and Data chart display after you select an xml data logfile that identifies the data to be logged.
Data Logging Pane
Item Description
Chart menu Accesses all charting functions.
Chart toolbar Quickly accesses major charting functions.
Chart Displays a chart.
42 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
43/126
-
8/10/2019 k28601_Web GPI User Manual
44/126
-
8/10/2019 k28601_Web GPI User Manual
45/126
-
8/10/2019 k28601_Web GPI User Manual
46/126
WebGPI Communication Software
User Manual
WebGPI-Log Application
Chart Toolbar
Button Name Description
Properties Opens a ChartFX Propertieswindow with the following tabs:
3Dtabdefines three-dimensional views of chart data.
Axestabsets labeling, tick marks, and gridlines for axes.
Seriestabdefines the display and formatting of series.
Generaltabsets general properties such as the chart title and chart background colors.
Click this windows Helpbutton for more information.
2D/3D Switches between two-dimensional and three-dimensional chart views.
Rotate Select a three-dimensional view of chart data to enable this button.
Opens a ChartFX Propertieswindow with the following tabs:
3Dtabdefines three-dimensional views of chart data.
Axestabsets labeling, tick marks, and gridlines for axes.
Seriestabdefines the display and formatting of series.
Generaltabsets general properties such as the chart title and chart background colors.
Click this windows Helpbutton for more information.
Z-Clustered Displays data clustered along the charts z-axis. Not available for all charts.
Zoom Zooms in and out on the data chart.
To zoom in, click this button. Click and drag in the chart to enlarge a selected area. To zoom out, click again on this
button.Print
Preview
Opens the Page setupwindow.
Use this window to set up the chart for printing.
Print Prints the chart to the selected printer.
Tools Opens a menu with the following commands:
Series legendcommandlabels the data series in the chart.
Data Editorcommanddisplays a table at the bottom of the chart.
This table shows the value and acquisition time of each data point in the chart.
Use the slider bars to access data points in the chart and in the table.
Changing a data point value in the table also changes the data point in the chart.
Toolbarcommandopens the Chart toolbar.
PaletteBarcommandopens a palette with colors that you can drag and apply to chart elements.
PatternBarcommandopens a palette with patterns that you can drag and apply to chart elements.
46 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
47/126
WebGPI Communication Software
User Manual
Chapter contents
How to Use the WebGPI Application
This chapter contains step-by-step instructions for performing common WebGPI tasks.
T The screen captures shown in this chapter may differ slightly from the screens in yourversion of the WebGPI application.
How to Connect Your PC to a Microcontroller .......................................................................................48
How to Start Communication Between the WebGPI Application and a Microcontroller ..... 49
How to Change a Parameter Value .............................................................................................................50
How to Restore Defaults ................................................................................................................................. 52
How to Log Run-Time Data ............................................................................................................................53
About Selecting Values for Logging ...........................................................................................................56
How to Create an XML Data Log File for Use in the WebGPI-Log Application .......................... 57
How to Download a Defaults or Application File to an HC08 or HC08A Processor ................. 59
How to Force Download an Application File to an HC08 or HC08A Processor ......................... 61
How to Download a Kernel to an HCO8 or an HC08A Processor .................................................... 64
How to Force Download a Kernel to an HCO8 or HC08A Processor .............................................. 68
How to Download an Application File to a 196 Processor................................................................. 72
How to Force Download an Application File to a 196 Processor .................................................... 75
How to Download a Kernel to a 196 Processor ......................................................................................78
How to Force Download a Kernel to a 196 Processor ..........................................................................82
How to Download an Application or Defaults File to a 167 Processor ......................................... 86
How to Force Download an Application File to a 167 Processor .................................................... 88
How to Download a Kernel to a 167 Processor ......................................................................................91
How to Force Download a Kernel to a 167 Processor ..........................................................................94
How to Download an Application File to an HC12 Processor ..........................................................98
How to Download a Kernel to an HC12 Processor ............................................................................. 102
How to Force Download a Kernel to an HC12 Processor .......................................... ...................... 105
How to Create a File with Microcontroller Data .................................................................................. 108
How to Download an Application File to TI Processor ..................................................................... 110
K28601Rev FB November 2012 47
-
8/10/2019 k28601_Web GPI User Manual
48/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Connect Your PC to a Microcontroller
The WebGPI application uses an RS-232-C COM port on your PC to communicate with
Sauer-Danfoss microcontrollers.
The table below lists the cables needed for communication with Sauer-Danfoss
microcontrollers through this COM port.
Cabling Requirements
Sauer-Danfoss Microcontroller Sauer-Danfoss Cable Part Number
MC200 PN 1090740
MC400 PN 1090740
S2X PN KW02027* or PN KW02012
MC300 PN KW02027* or PN KW02012
* Recommended cable.
This cable has a Prog/Readswitch. Leave this switch set to Read.
ConnectorsSauer-Danfoss Cable PN 1090740
ConnectorsSauer-Danfoss Cable PN KW02027
48 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
49/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Start Communication between the WebGPI Application and a Microcontroller1. Connect an appropriate RS-232-C cable between a COM port on your PC and the
Sauer-Danfoss microcontroller.
2. Connect to the microcontroller and open its application interface.
A. On your PC, start the WebGPI application.
B. As needed, use Portto select the correct COM port.
C. Click Connectto connect to the microcontroller.
Baudratereplaces Portand shows the current rate.
TheSoftware P/Ndisplays the application software part number.
D. Click Applicationto open the microcontroller application interface.
The Navigation pane lists the microcontroller application parameters.
The Parameter pane identifies the microcontroller application.
K28601Rev FB November 2012 49
-
8/10/2019 k28601_Web GPI User Manual
50/126
-
8/10/2019 k28601_Web GPI User Manual
51/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
4. Change the selected value.A. Enter the new value.
B. As required, enter the Passwordand set the PWLevelneeded to change thevalue.
C. Click Send.
K28601Rev FB November 2012 51
-
8/10/2019 k28601_Web GPI User Manual
52/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Restore Defaults
To restore defaults, click SetDefaults.
52 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
53/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Log Run-Time DataT WebGPI-Log application data acquisition rates are typically twice as fast as the WebGPI
application rates. To log data in the WebGPI-Log application, you must first use the
WebGPI application to create an xml data log file that defines the values that you want
to log. For more information, see How to Create an XML Data Log File for Use in the
WebGPI-Log Applicationon page 57.
1. Connect an appropriate cable between a COM port on your PC and the Sauer-Danfossmicrocontroller.
2. Start communication with the microcontroller (see page49).
3. Select the data to be plotted.
A. In the Navigation pane, click to open the block diagram with the data to be
plotted.
B. In the block diagram, click the data to be plotted.
Left-click to select data to log, without setting a data trigger.
Right-click to select data to log and set a data trigger in the DataLogging
window.
Until a data trigger occurs, new data overwrites the oldest data when thebuffer fills. Data logging continues until you click Stop Logging.
When a data trigger occurs, logging continues until new data (including anyPretrigger timedata) fills the data buffer and then stops.
K28601Rev FB November 2012 53
-
8/10/2019 k28601_Web GPI User Manual
54/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
4. Open the data logging pane and start logging data.
A. In View, select Data Loggingto display a full Data Logging pane.
B. Click on Find Update Timeto automatically find the optimum update rate.
C. As needed, use selections in the Chart menu to set the appearance of the data.
D. As needed, enter a Pretrigger timeand a Logging time.
When you have defined a data trigger event, use the Pretrigger timeto setthe amount of pretrigger data collected when the event occurs.
The Logging timesets the size of the data buffer.
E. Click on Start Loggingto start logging data.
54 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
55/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
5. Stop the data logging and save the data.
A. Click Stop Loggingto stop data logging.
B. In the Chart menu, click the Save Chartbutton to open the Save Aswindow. Use
this window to save a file of the logged data (*.CHD) for future viewing.
C. Click Quit Loggingto return to the previous pane and cancel all data logging
selections.
K28601Rev FB November 2012 55
-
8/10/2019 k28601_Web GPI User Manual
56/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
About Selecting Values for Logging
Values can be selected for immediate logging in the WebGPI application.
Values can also be selected for logging in the WebGPI-Log application.
The procedure for selecting the values that you want to log is the same for both
applications.
A left-click in a block diagram field selects values that get logged as soon as your click
the Start Loggingbutton.
A right-click in a block diagram field:
Selects values that only log after a trigger event.
Displays a Data Loggingwindow.
This window defines the trigger condition and the trigger value for a trigger
event.
Data logging starts when the value being logged meets both the triggercondition and value.
Select a trigger condition of noneto cancel a trigger event.
56 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
57/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Create an XML Data Log File for Use in the WebGPI-Log Application1. Open the WebGPI application.
2. Connect the WebGPI application to the microcontroller application.
3. Display the Mainpane for the application.
4. In the WebGPIwindows Mainpane, select the values that you want to log in the
WebGPI-Log application. For more information, see About Selecting Values for Logging
on page 56.
5. Open the File Creationwindow to create an xml data log file with the values that youwant to log in the WebGPI-Log application.
A. Click the Savebutton in the WebGPIwindow to open the File Creationwindow.
B. Select the XMLoption in the File Creationwindow.
C. Click the Searchbutton in the File Creationwindow to open the SelectFilewindow.
D. In the Select Filewindow, name the xml data log file.
E. Click the Savebutton in the Select File window to close this window.
K28601Rev FB November 2012 57
-
8/10/2019 k28601_Web GPI User Manual
58/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
6. Create the xml data log file.
A. Click the Createbutton in File Creationwindow.
B. Click OKto close the window with the Savecompleted message.
58 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
59/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Download a Defaults or Application File to an HC08 or HC08A Processor1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicles engine.)
3. Start the WebGPI application, connect to the microcontroller, and display the
Downloaderpane.
A. Start the WebGPI application.
B. As needed, change the Portto match the PC COM port that you are using.
C. Click Connectto connect to the microcontroller.
D. Click Downloadto display the Downloaderpane.
If you get a Device is not respondingmessage, click OKto close this message.
Click Downloadto display the Downloaderpane and then perform a force
download procedure, starting with step4 on page62.
K28601Rev FB November 2012 59
-
8/10/2019 k28601_Web GPI User Manual
60/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
4. Download an application or defaults file.
A. Click a File typeof either Applicationor Defaults.
B. Check the Application-Fileor the Default-Fileselection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Searchto display the Select Filewindow. Use this
window to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
C. Click Downloadto start the download of the file.
5. When the download finishes, check the DownloaderProgress Indicator to make surethat your download has been successful.
60 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
61/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Force Download an Application File to an HC08 or HC08A Processor1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicles engine.)
3. Start the WebGPI application and display the Downloaderpane.
A. Start the WebGPI application.
B. As needed, change the Portto match the PC COM port that you are using.
C. Click Downloadto display the Downloaderpane.
K28601Rev FB November 2012 61
-
8/10/2019 k28601_Web GPI User Manual
62/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
4. Select an application file to download.
A. Click OKto close the No micro selectedmessage.
B. Click a Microcontroller typeof either HC08or HC08A, depending on the type ofprocessor used by your microcontroller.
C. Click a File typeof Application.
D. Note the Application-Fileselection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Searchto display the Select Filewindow. Use this
window to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
62 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
63/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
5. Download the application file.
A. Click Force downloadto start the download.
B. Remove and then reapply microcontroller power.
C. Click Downloadto continue the download.
6. When the download finishes, check the DownloaderProgress Indicator to make sure
that your download has been successful.
K28601Rev FB November 2012 63
-
8/10/2019 k28601_Web GPI User Manual
64/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Download a Kernel to an HCO8 or an HC08A Processor
1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicles engine.)
3. Start the WebGPI application, connect to the microcontroller, and display the
Downloaderpane.
A. Start the WebGPI application.
B. As needed, change the Portto match the PC COM port that you are using.
C. Click Connectto connect to the microcontroller.
D. Click Downloadto display the Downloaderpane.
If you get a Device is not respondingmessage, click OKto close this message.
Click Downloadto display the Downloaderpane and then perform a force
download procedure, starting with5 on page69.
64 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
65/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
4. Connect the microcontroller boot pin to 0 V.A. Remove power from the microcontroller.
B. Connect the boot pin to 0 V.
C. Apply power to the microcontroller.
5. Select and download a boot file.
A. Click a File typeof Kernel.
B. Check the Boot-Fileselection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Searchto display the Select Filewindow. Use this
window to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin theDownloaderpane and continue your search.
C. Click Boot-file downloadto download the file.
As soon as you click this button, the WebGPI application displays a window with a
Return code errorPlease repowermessage.
D. Remove and then reapply microcontroller power.
E. Click OKin the message window to continue the download.
K28601Rev FB November 2012 65
-
8/10/2019 k28601_Web GPI User Manual
66/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
6. When the boot file download finishes, disconnect the boot pin from 0 V.
Do not remove power from the microcontroller in this step.
7. Download a kernel file.
A. Check the Operating System File selection.
The WebGPI application will download this file to the microcontroller.
As needed, use the Search Filewindow to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
B. Click Downloadto download the file.C. When the download finishes, remove and then reapply microcontroller power.
66 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
67/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
8. Check that you have successfully downloaded a new file.
A. In the Downloaderpane, click Exitto return to the WebGPIwindow.
B. In the WebGPI window, click Connectto reconnect to the microcontroller.
C. In the WebGPI window, click Download to display the Downloaderpane.
D. Check the DownloaderProgress Indicator to make sure that your download hasbeen successful.
K28601Rev FB November 2012 67
-
8/10/2019 k28601_Web GPI User Manual
68/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Force Download a Kernel to an HCO8 or HC08A Processor
1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicles engine.)
3. Start the WebGPI application and display the Downloaderpane.
A. Start the WebGPI application.
B. As needed, change the Portto match the PC COM port that you are using.
C. Click Downloadto display the Downloaderpane.
4. Connect the microcontroller boot pin to 0 V.
A. Remove power from the microcontroller.
B. Connect the boot pin to 0 V.
C. Apply power to the microcontroller.
68 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
69/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
5. Select and download the boot file.
A. Click OKto close the No micro selectedmessage.
B. Click a Microcontroller typeof either HC08or HC08A, depending on the type ofprocessor used in your microcontroller.
C. Click a File typeof Kernel.
D. Check the Boot-Fileselection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Searchto display the Select Filewindow. Use this
window to select the right file. If you still cannot find the right file, uncheck theFile name filterin the Downloaderpane and continue your search.
E. Click Boot-file downloadto download the file.
As soon as you click this button, the WebGPI application displays a window with a
Return code errorPlease repowermessage.
F. Remove and then reapply microcontroller power.
G. Click OKin the message window to continue the download.
K28601Rev FB November 2012 69
-
8/10/2019 k28601_Web GPI User Manual
70/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
6. When the download finishes, disconnect the boot pin from 0 V.
Do not remove power from the microcontroller in this step.
7. Download a kernel file.
A. Check the Operating System File selection.
The WebGPI application will download this file to the microcontroller.
As needed, use the Search Filewindow to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
B. Click Downloadto download the file.C. When the download finishes, remove and then reapply microcontroller power.
70 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
71/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
8. Check that your download has been successful.
A. In the Downloaderpane, click Exitto return to the WebGPIwindow.
B. In the WebGPI window, click Connectto reconnect to the microcontroller.
C. In the WebGPI window, click Download to display the Downloaderpane.
D. Check the DownloaderProgress Indicator to make sure that your download hasbeen successful.
K28601Rev FB November 2012 71
-
8/10/2019 k28601_Web GPI User Manual
72/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Download an Application File to a 196 Processor
T 196 microcontrollers do not have separate defaults files. To change default values, youmust download a new application file with new default values.
1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicles engine.)
3. Start the WebGPI application, connect to the microcontroller, and display the
Downloaderpane.
A. Start the WebGPI application.
B. As needed, change the Portto match the PC COM port that you are using.
C. Click Connectto connect to the microcontroller.
D. Click Downloadto display the Downloaderpane.
72 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
73/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
If you get a Device is not respondingmessage, click OKto close this message.Click Downloadto display the Downloaderpane and then perform a force
download procedure, starting with step4 on page76.
4. Download an application file.
A. Check the Application-Fileselection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Searchto display the Select Filewindow. Use this
window to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
B. Click Downloadto start the download.
K28601Rev FB November 2012 73
-
8/10/2019 k28601_Web GPI User Manual
74/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
5. When the download finishes, check the DownloaderProgress Indicator to make sure
that your download has been successful.
74 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
75/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Force Download an Application File to a 196 Processor1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicles engine.)
3. Start the WebGPI application and display the Downloaderpane.
A. Start the WebGPI application.
B. As needed, change the Portto match the COM port that you are using on your PCto communicate with the microcontroller.
C. Click Downloadto display the Downloaderpane.
K28601Rev FB November 2012 75
-
8/10/2019 k28601_Web GPI User Manual
76/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
4. Select an application file to download.
A. Click OKto close the No micro selectedmessage.
B. Click a Microcontroller typeof 196.
C. Click a File typeof Application.
D. Note the Application-Fileselection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Searchto display the Select Filewindow. Use thiswindow to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
76 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
77/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
5. Download the application file.
A. Click Force downloadto start the download.
B. Remove and then reapply microcontroller power.
C. Click Downloadto continue the download.
6. When the download finishes, check the DownloaderProgress Indicator to make sure
that your download has been successful.
K28601Rev FB November 2012 77
-
8/10/2019 k28601_Web GPI User Manual
78/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Download a Kernel to a 196 Processor
T Downloading a 196 kernel deletes the application file in the 196 processor. Afterdownloading the kernel, you will have to reinstall the application file.
1. Connect an appropriate cable between a PC COM port and the microcontroller.
2. Apply power to the microcontroller.
(When applying power to the microcontroller, do not start your vehicles engine.)
3. Start the WebGPI application, connect to the microcontroller, and display the
Downloaderpane.
A. Start the WebGPI application.
B. As needed, change the Portto match the PC COM port that you are using.
C. Click Connectto connect to the microcontroller.
D. Click Downloadto display the Downloaderpane.
78 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
79/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
If you get a Device is not respondingmessage, click OKto close this message.Click Downloadto display the Downloaderpane and then perform a force
download procedure, starting with step4 on page83.
4. Select and download a boot file.
A. Click a File typeof Kernel.
B. Check the Boot-Fileselection.
The WebGPI application will download this file to the microcontroller.
If this is not the right file, click Searchto display the Select Filewindow. Use this
window to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
C. Click Boot-file downloadto download the file.
K28601Rev FB November 2012 79
-
8/10/2019 k28601_Web GPI User Manual
80/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
5. Download a kernel file.
A. Check the Operating System File selection.
The WebGPI application will download this file to the microcontroller.
As needed, use the Search Filewindow to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
B. Click Downloadto download the file.
Once you download the boot and kernel files, you must also download the
application file to successfully complete this procedure.
80 K28601Rev FB November 2012
-
8/10/2019 k28601_Web GPI User Manual
81/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
6. Download an application file.
A. Click a File typeof Application.
B. Check the Application-File selection.
The WebGPI application will download this file to the microcontroller.
As needed, use the Search Filewindow to browse to and select the right file.
If you still cannot find the right file, uncheck the File name filterin the
Downloaderpane and continue your search.
C. Click Downloadto download the file.
7. When the download finishes, check the DownloaderProgress Indicator to make sure
that you have successfully downloaded the kernel and application files.
K28601Rev FB November 2012 81
-
8/10/2019 k28601_Web GPI User Manual
82/126
WebGPI Communication Software
User Manual
How to Use the WebGPI Application
How to Force Download a Kernel to a 196 Processor
T Download