Glasfloss Phoenix Series Poly-Rings, Sleeves and Links offer a variety ofstyles, multiple filtration media layers and performance levels for most appli-cations. The self-sealing media gasket advantage of the Phoenix Series pre-vents dirt-laden air from bypassing the filter, an occurrence common withcardboard frame filters. The Glasfloss Phoenix Series Poly-Rings areoffered in nominal thicknesses (1/2": PR-5, 1": PR-10 and 2": PR-20)for a broad range of dust loading applications.The Glasfloss Phoenix Series PR-5, PR-10 and PR-20 filters areconstructed with multiple layers of progressively dense, 100%non-woven polyester media. The media layers are thermallysealed around an internal wire frame. A center wire support strutprevents the filter media from ballooning during operation. Theprogressively dense orientation of each media layer enables thesmall micron size particles to depth load within the filter. The lastlayer of media incorporates a non-migratory, in-line tackifier that isbonded to the media fibers, allowing maximum use of the filter'supstream layers. The in-line tackifier will not shed and contaminate equip-ment downstream of the filter. The Glasfloss Phoenix Series shall incorporatesufficient media overlap around the filter's perimeter to prevent contaminantsfrom bypassing around the holding frame.The Glasfloss Phoenix Series Poly-Rings, Sleeves and Links can be used ina variety of HVAC applications and are commonly used as the air intake filterfor spray paint booths. The Phoenix Series filters are manufactured with com-ponents impervious to moisture, which makes them excellent for rooftop unitsand HVAC applications plagued with high humidity. The Phoenix Series filtersare durable; incorporating a heavy-duty internal framework, they are less like-ly to suffer damage during transit. Whether used as the primary or the pre-fil-ter to extend the life of more expensive final filters, the Phoenix Series offersvalue and performance not found in other filters.

Glasfloss Phoenix Series Poly-Rings, Sleeves and Linksshall be constructed utilizing layers of 100% non-wovenpolyester media. For optimum performance, the air leavingside of the Phoenix Series products shall be treated with anon-toxic, non-migratory adhesive. An internal wire frameshall be thermally sealed within the filter to maintainintegrity. A thermal seal shall extend around the perimeteredge of the internal wire frame and on both sides of the cen-ter wire support strut, ensuring the permanent bond of allmedia plies. There shall be sufficient media overlap toensure a positive seal between the filter and the holdingframe, eliminating the possibility of air bypass and the needfor supplemental gasketing. PR-10 and PR-20 Poly-Ringsshall be rated MERV 8 when tested in accordance with theANSI/ASHRAE 52.2 Test Standard.

FEATURES

CONSTRUCTION

SPECIFICATIONS

APPLICATIONS

· Available in Rings, Sleeves and Links· 100% Non-woven Polyester Media· Multiple Layers of Progressively DenseMedia Fibers· Internal Wire Frame Structure· Self-sealing Media Gasket

INTERNAL WIREFRAME

TACKIFIER ON AIREXIT SURFACE

MULTIPLELAYERS OF

PROGRESSIVEDENSITY

POLYESTERMEDIA

SELF-SEALINGMEDIA GASKET

CENTER WIRESUPPORT STRUT

PRODUCT BULLETIN 4 PRPSECTION 4

6-15-10

www.glasfloss.com

“Serving You With Locations Throughout The Nation”Glasfloss has a policy of uninterrupted research, development and product improvement and reserves the right to change design and specifications without notice.

>

>

[ ]PHOENIX SERIESPoly-Rings, Sleeves and Links

>

>

>

>

PR-10 andPR-20 ratedMERV 8

www.glasfloss.com

12x24x1/215x20x1/216x20x1/216x25x1/218x24x1/220x20x1/220x24x1/220x25x1/224x24x1/225x25x1/2

11-3/8 x 23-3/8 x 1/214/3/8 x 19-3/8 x 1/215-3/8 x 19-3/8 x 1/215-3/8 x 24-3/8 x 1/217-3/8 x 23-3/8 x 1/219-3/8 x 19-3/8 x 1/219-3/8 x 23-3/8 x 1/219-3/8 x 24-3/8 x 1/223-3/8 x 23-3/8 x 1/224-3/8 x 24-3/8 x 1/2

300300300300300300300300300300

0.130.130.130.130.130.130.130.130.130.13

2.002.082.222.773.002.773.333.474.004.34

305 x 610 x 13381 x 508 x 13406 x 508 x 13406 x 635 x 13610 x 457 x 13508 x 508 x 13508 x 610 x 13508 x 635 x 13610 x 610 x 13635 x 635 x 13

5490549054905490549054905490549054905490

32.3432.3432.3432.3432.3432.3432.3432.3432.3432.34

SIZEW x H x DNOMINAL

PRP1224-5PRP1520-5PRP1620-5PRP1625-5PRP1824-5PRP2020-5PRP2024-5PRP2025-5PRP2424-5PRP2525-5

12x24x115x20x116x20x116x25x118x24x120x20x120x24x120x25x124x24x125x25x1

11-3/8 x 23-3/8 x 7/814-3/8 x 19-3/8 x 7/815-3/8 x 19-3/8 x 7/815-3/8 x 24-3/8 x 7/817-3/8 x 23-3/8 x 7/819-3/8 x 19-3/8 x 7/819-3/8 x 23-3/8 x 7/819-3/8 x 24-3/8 x 7/823-3/8 x 23-3/8 x 7/824-3/8 x 24-3/8 x 7/8

300300300300300300300300300300

0.200.20 0.20 0.20 0.200.20 0.20 0.20 0.20 0.20

2.002.082.222.773.002.773.333.474.004.34

305 x 610 x 25381 x 508 x 25406 x 508 x 25406 x 635 x 25 610 x 457 x 25508 x 508 x 25508 x 610 x 25508 x 635 x 25610 x 610 x 25635 x 635 x 25

5490549054905490549054905490549054905490

42.2942.29 42.29 42.29 42.2942.29 42.29 42.29 42.29 42.29

PRP1224-10PRP1520-10PRP1620-10PRP1625-10PRP1824-10PRP2020-10PRP2024-10PRP2025-10PRP2424-10PRP2525-10

12x24x215x20x216x20x216x25x218x24x220x20x220x24x220x25x224x24x225x25x2

11-3/8 x 23-3/8 x 1-3/414-3/8 x 19-3/8 x 1-3/415-3/8 x 19-3/8 x 1-3/415-3/8 x 24-3/8 x 1-3/417-3/8 x 23-3/8 x 1-3/419-3/8 x 19-3/8 x 1-3/419-3/8 x 23-3/8 x 1-3/419-3/8 x 24-3/8 x 1-3/423-3/8 x 23-3/8 x 1-3/424-3/8 x 24-3/8 x 1-3/4

300300300300300300300300300300

0.300.300.300.300.300.300.300.300.300.30

2.002.082.222.773.002.773.333.474.004.34

305 x 610 x 50381 x 508 x 50406 x 508 x 50406 x 635 x 50610 x 457 x 50508 x 508 x 50508 x 610 x 50508 x 635 x 50610 x 610 x 50635 x 635 x 50

5490549054905490549054905490549054905490

74.6474.6474.6474.6474.6474.6474.6474.6474.6474.64

PRP1224-20PRP1520-20PRP1620-20PRP1625-20PRP1824-20PRP2020-20PRP2024-20PRP2025-20PRP2424-20PRP2525-20

MODELNUMBER

SIZEW x H x DEXACT

RATEDVELOCITYFPM

INITIALRESIST.IN. W.G.

MEDIASQUAREFOOT

SIZEW x H x DNOMINALMM

RATEDVELOCITY

M/H

INITIALRESIST.PASCALS

Regular manufacturing tolerances are +/- 1/8", to be observed on all exact widths and heights. Recommended final resistance IN. W.G. is 1.00”

Phoenix Series: PR-5

Phoenix Series: PR-10

Phoenix Series: PR-20

[ ]PHOENIX SERIESPoly-Rings, Sleeves and Links

RESISTANCE IN. W.G.

AIR FLOW RATE, (FPM)

0

0.1

0.2

0.3

0.4

0.5

250 300

PR-5 PR-10 PR-20 PR-5 PR-10 PR-20

350 400 450 500 REMOVAL PE

RCENTAGE

PARTICLE SIZE, MICRONS

0

20

40

60

80

100

.1 1 10

MINIMUM PARTICLE SIZE EFFICIENCYTest Filter Size 24" x 24" Nominal

STANDARD PRESSURE DROPTest Filter Size 24" x 24" Nominal

PR-10

PR-5

PR-20

www.glasfloss.com

“Serving You With Locations Throughout The Nation”Glasfloss has a policy of uninterrupted research, development and product improvement and reserves the right to change design and specifications without notice.

Glasfloss Phoenix Series PR-5 Ring Panels, Sleeves and Links are engineered for light dust loading appli-cations. PR-5 shall be 100% non-woven polyester. Two distinct plies of media shall be utilized, each beingmore dense than the one preceding it. The progressively dense fiber orientation of each media layerenables the small micron size particles to depth load within the filter. The PR-5 shall have a nominal thick-ness of 1/2". An internal wire frame shall be thermally sealed within the filter. There shall be sufficientmedia overlap to ensure a positive seal between the filter and the holding frame, eliminating air bypass.

Glasfloss Phoenix Series PR-10 Ring Panels, Sleeves and Links are engineered for moderate dust load-ing applications. PR-10 shall be 100% non-woven polyester. Three distinctly different plies of media shallbe utilized, each being more dense than the one preceding it. The progressively dense fiber orientation ofeach media layer enables the small micron size particles to depth load within the filter. The PR-10 shallhave a nominal thickness of 1”. An internal wire frame shall be thermally sealed within the filter. There shallbe sufficient media overlap to ensure a positive seal between the filter and the holding frame, eliminatingair bypass. The PR-10 Ring Panels shall be rated MERV 8 when tested in accordance with theANSI/ASHRAE 52.2 Test Standard.

Glasfloss Phoenix Series PR-20 Ring Panels, Sleeves and Links are engineered for heavy dust loadingapplications. PR-20 shall be 100% non-woven polyester. Three distinctly different plies of media shall beutilized, each being more dense than the one preceding it. The progressively dense fiber orientation of eachmedia layer enables the small micron size particles to depth load within the filter. The PR-20 shall have anominal thickness of 2”. An internal wire frame shall be thermally sealed within the filter. There shall besufficient media overlap to ensure a positive seal between the filter and the holding frame, eliminating airbypass. The PR-20 Ring Panels shall be rated MERV 8 when tested in accordance with the ANSI/ASHRAE52.2 Test Standard.

Specifications

Glasfloss Phoenix Series Poly-Rings, Sleeves,and Links shall be constructed utilizing multiplelayers of 100% non-woven polyester media.The progressively dense fiber orientation ofeach media layer enables the small micron sizeparticles to depth load within the filter. Allowingthe particles to depth load will enhance the lifeof the filter.

Air Flow

Smaller FiberBlend on

Downstream

In-Line Tackifier on

Air Leaving Side

Larger Fiberson Air Entering

SideProgressively

Dense Fiber Blend

[ ]PHOENIX SERIESPoly-Rings, Sleeves and Links

>

>

>

· “Sleeves” - An economical alternative to reuse the heavy-duty internal wire frame.Available in standard and special sizes, sleeves are a good alternative for difficultto install wall units.

· “Links” - Glasfloss manufactures a complete line of standard and special size poly-ring linkfilters to accommodate front load or side access housings. Glasfloss Poly-Ring Linkfilters are available in PR-5, PR-10 and PR-20 Series. There shall be sufficient divi-sions and seals between each poly-ring panel that allows for panel separation when necessary. Glasfloss Poly-Ring Links are ideal for side access housings, andunfiltered air is virtually eliminated with self-seals around and in-between each panel. Glasfloss Poly-Ring Panels also offer easier handling, especially for rooftop units, andthey are not susceptible to damage as some traditional cardboard frame filters. Glasfloss Poly-Ring Panels are a convenient alternative to individual cardboard framefilters and can save labor costs during installation.

· “Series 55” - For added strength during operation, three center wire support struts are sealed within the filter.

Glasfloss Phoenix Series Poly-Rings, Sleeves and Links shall be constructed utilizing layers of100% non-woven polyester media. The filter shall be a nominal 1/2”, 1” or 2” in thickness. Foroptimum performance, the air leaving side of the Phoenix Series products shall be treated with anon-toxic, non-migratory adhesive. An internal wire frame shall be thermally sealed within thefilter to maintain integrity. A thermal seal shall extend around the filter’s perimeter and on bothsides of the center wire support strut, ensuring the permanent bond of all media plies. There shallbe sufficient media overlap to ensure a positive seal between the filter and the holding frame,eliminating the possibility of air bypass and the need for supplemental gasketing.

SPECIFICATIONS

SLEEVES and LINKS

OPTIONS

www.glasfloss.com

“Serving You With Locations Throughout The Nation”Glasfloss has a policy of uninterrupted research, development and product improvement and reserves the right to change design and specifications without notice.

Distributed by:

[ ]PHOENIX SERIESPoly-Rings, Sleeves and Links

>

>

>

Glasfloss is proud to be an Energy StarPartner. The Energy Star Service andProduct Provider Partnership is availableto organizations that provide energy effi-ciency related products and/or servicesto the commercial buildings and industri-al plants in the United States.

Glasfloss manufactures a variety ofmedium and high efficiency air filterswhich can be specified for LEED cer-tification applications. For specificinformation on these products, pleasecontact your local Glasfloss SalesRepresentative.