ke plastomer - ksb · pdf fileprocess engineering sugar industry ... material material number...

Butterfly Valve

KE PLASTOMER

Centred-disc Butterfly ValveWith PFA LinerDN 40-600PS 10 bar

Type Series Booklet

Legal information/Copyright

Type Series Booklet KE PLASTOMER

All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,edited or processed for any other purpose, nor otherwise transmitted, published or made available toa third party without the manufacturer's express written consent.

Subject to technical modification without prior notice.

© KSB S.A.S, Gennevilliers (Paris), France 12.04.2016

Butterfly Valves

Centred-disc Butterfly Valves

KE PLASTOMER

Main applications

▪ Chemical industry

▪ Seawater desalination/reverse osmosis

▪ Paper and cellulose industry

▪ Pharmaceutical industry

▪ Swimming pools

▪ Process engineering

▪ Sugar industry

▪ Industrial recirculation systems

▪ Water treatment/conditioning

Fluids handled

▪ Condensate

▪ Cleaning agents

▪ Distillate

▪ Aggressive fluids

▪ Fluids containing mineral oils

▪ Solids-laden fluids

▪ Corrosive fluids

▪ Explosive fluids

▪ Combustible fluids

▪ Inorganic fluids

▪ Fluids posing a health hazard

▪ Organic fluids

▪ Polymerising/crystallising fluids

▪ Toxic fluids

▪ Highly aggressive fluids

▪ Volatile fluids

▪ Oil

▪ Brine

▪ Solvents

▪ Vacuum

Operating data

Operating properties

Characteristic ValueNominal pressure PN 10Nominal size DN 40-600Max. permissible pressure 10 bar at ambient

temperatureMax. permissibletemperature*

+200 °C

Min. permissible temperature* -20 °CActuation at ΔP 10 bar (max.) at ambient

temperatureSuitable for vacuumapplications down to

10 -5 bar absolute

Max. permissible flow velocityat operating pressure

5 m/s for clean liquids

50 m/s for clean gases

*The temperature limits depend on the fluid handled and theelastomer's properties.

Design details

Design

Valves to type series booklet 0167.1

▪ Two-piece body:

– Wafer-type body with flat faces - T1: DN 40 - 300

– Full-lug body with raised faces - T4: DN 40 - 300

– U-section body - T6: DN 350 - 600

▪ PFA liner

▪ Body types T4 and T6 suitable for downstream dismantling

▪ Earth connection option

▪ Design to EN 593 and ISO 10631

▪ Top flange to ISO 5211

▪ Marked in accordance with EN 19

▪ Absolutely tight shut-off (no leakage visible to the nakedeye) in either flow direction in accordance with EN12266-1, leakage rate A; ISO 5208, Category A; API 598Table 5 and FCI 70-2 Cl. VI

▪ Face-to-face length to ISO 5752-20, EN 558-1-20 and API609, Table 1

▪ Standardised connections to EN 1092 PN 10, PN 16 andASME B16.5 Class 150

▪ Flange faces to EN 1092 PN 10

▪ Body with polyurethane coating, thickness 80 µm, colour:RAL 5002, blue.

▪ The valves satisfy the safety requirements of Annex I ofthe European Pressure Equipment Directive 97/23/EC (PED)for fluids in Groups 1 and 2.

▪ The above requirement also applies to unstable gases onrequest.

▪ Valves with actuators can meet the requirements of the2006/42/EC Machinery Directive for partly completedmachinery.

Butterfly ValvesCentred-disc Butterfly Valves

KE PLASTOMER 3

▪ The valves meet the requirements of the REACH 1907/2006regulation. None of the substances listed in the candidatelist and in Annex XIV of the regulation is present in aconcentration above 0.1 % (w/w) (Article 33/REACH).

Variants

▪ S / SR / SP quarter-turn levers

▪ MN / MR manual gearboxes

▪ ACTELEC electric actuators

▪ ACTAIR / DYNACTAIR pneumatic actuators

▪ HQ hydraulic actuators

▪ AMTROBOX limit switch box

▪ AMTRONIC valve controller with compressed air supply viadirectional control valve

▪ SMARTRONIC intelligent positioner

▪ ATEX design in compliance with the 94/9/EC Directive

Body materials

Overview of available materials

Material Materialnumber

Body DN (max.) KSBcode

EN-GJS-400-18U-LT (EN-JS1049)

JS 1049 T1

T4

DN 40-300 3l

EN-GJS-400-15(EN-JS1030)

JS 1030 T6 DN 350-600 3g

Product benefits

▪ Back-up seal at the stem passages to EN 12569:

– Ensured by pressing the liner's collar against the stem

– This pressure is applied by means of a spring lockwasher.

– This secondary seal is not active in normal operation.It is completely independent of the primary seal atthe stem passage.

▪ Tight sealing at the flanged line connections:

– Ensured by the compression of the liner between thebody and the piping flange

– An additional elastomer joint ring ensures reliableand long-term sealing at the flanges, even when usedin a vacuum.

▪ Tight shut-off:

– Ensured by the contact between the sphericallymachined valve disc and the liner which protects thebody

– The contact pressure is developed by the elastomerbacking ring.

▪ Primary seal at the stem passages:

– Ensured by the contact pressure between thespherically machined valve disc and the PFA liner

– An elastomer backing ring ensures reliable pressure inthe long term.

– Perfect sealing at the stem passages is achieved viathe compression of the liner's collar and the backingring between the stem and the body.

▪ Single-piece stem/valve disc assembly, core made ofstainless steel with a chromium content of 13 % or 17 %,PFA-encapsulated

▪ Two-piece body

▪ PFA thickness: 2.5 mm

▪ Anti-static ring (resistance < 10 Ohm)

▪ Stem shoulder functions as stem anti-blow out device

▪ Valve body closed at the bottom: DN 40 to 100 mm

▪ Extended neck allows insulation

▪ Earth connection option

▪ The weakest point of the stem is located outside the valvebody to ensure the valve's integrity.

▪ On option: FKM backing ring for use in chlorine

▪ Valve actuation options:

– Manual

– Electric

– Pneumatic

– Hydraulic

Related documents

Other applicable documentation

Document Reference No.Actuator selection 0166.11Operating manual 8455.8

On all enquiries/orders please specify

1. Type series

2. Nominal pressure

3. Nominal size

4. Fluid handled

5. Flow rate/velocity

6. Temperature

7. Materials (body, valve disc, seat)

8. Line connection, flange facing and flange surface quality

9. Actuator/automation

10. Reference number of type series booklet

Pressure/temperature ratings

Test and operating pressures

Nominalpressure

Shell test Leak test (seat)

P10, P11 P12, leakagerate A

PN [bar] [bar]10 15 * 11** 5.5 ***

* EN 12266-1 (P10, P11)

** EN 12266 -1 (P12, leakage rate A)

*** FKM backing ring


4 KE PLASTOMER

Technical data

Hydraulic characteristics

[Kvo in m3/ h / bar0.5][Cvo in GUS / mn / psi 0.5]

DN NPS Version with single-piece stem/valve discassembly, PFA-encapsulated

Version with metal valve disc

Flow coefficient with disc fully open Flow coefficient with disc fully open

Kvo Cvo Zeta Kvo Cvo Zeta40 1½ 75 87 0,73 34 39 3,5450 2 160 186 0,39 90 104 1,2365 2½ 260 302 0,42 150 174 1,2780 3 440 510 0,34 220 255 1,35100 4 680 789 0,35 540 626 0,55125 5 1300 1508 0,23 960 1114 0,42150 6 2400 2784 0,14 1900 2204 0,22200 8 5000 5800 0,10 3600 4176 0,20250 10 6500 7540 0,15 6200 7192 0,16300 12 9200 10672 0,15 9000 10440 0,16350 14 18400 21344 0,071 9540 11066 0,26400 16 23200 26912 0,076 10900 12644 0,34450 18 29400 34104 0,076 17700 20532 0,21500 20 36000 41760 0,077 18700 21692 0,29600 24 52100 60436 0,076 25000 29000 0,33

Actuating torques (in Nm)

A safety coefficient has already been included in the actuatingtorques for actuator selection.

DN NPS Actuating torque

[Nm]40 1½ 1450 2 2265 2½ 2580 3 40100 4 50125 5 65150 6 100200 8 200250 10 270300 12 380350 14 500400 16 700450 18 900500 20 1100600 24 2000


KE PLASTOMER 5

Pressure/temperature rating curve

Silicone backing ring FKM backing ringP: pressure in bar(g)

°C: temperature in °C


6 KE PLASTOMER

Materials

Version with single-piece stem/valve disc assembly, PFA-encapsulated - DN 40-600

Sectional drawing

DN 40 - 100 DN 125 - 300 DN 350 - 600Wafer-type body T1 and full-lug type body

T4U-section body - T6


KE PLASTOMER 7

Detail viewsDetail view: connection of body sections On option for DN 40 - 300: centring ring

to NAMURDetail view: back-up seal

DN 40 - 100: back-up seal at upper stem section (part Nos. 411.1, 937.1 and 55-2.1)

DN 125 - 600: back-up seal at upper and lower stem sections (part Nos. 411.1, 411.2, 937.1, 937.2, 55-2.1 and 55-2.2)

List of components - Single-piece stem/valve disc assembly, PFA-encapsulated

Part No. Description DN Materials KSB code101 Lower body section, T1 and T4 40 - 300 Nodular cast iron EN-GJS-400-18U-LT

(JS1049)3l

101 Lower body section, T6 350 - 600 Nodular cast iron EN-GJS-400-15 (JS1030) 3g102 Upper body section, T1 and T4 40 - 300 Nodular cast iron EN-GJS-400-18U-LT

(JS1049)3l

102 Upper body section, T6 350 - 600 Nodular cast iron EN-GJS-400-15 (JS1030) 3g310.1 Plain bearing 40 - 600 Steel with reinforced PTFE coating 310.2 Plain bearing 40 - 600 Steel with reinforced PTFE coating 310.3 Plain bearing 125 - 600 Steel with reinforced PTFE coating 310.4 Plain bearing 350 - 600 Steel with reinforced PTFE coating 411.1 Joint ring 40 - 600 Stainless steel 411.2 Joint ring 125 - 600 Stainless steel 412.1 O-ring 40 - 600 FKM 412.2 O-ring for flange sealing 40 - 600 Nitrile 412.3 O-ring for flange sealing 40 - 600 Nitrile 412.4 O-ring for flange sealing 40 - 600 Nitrile 412.5 O-ring for flange sealing 40 - 600 Nitrile 413 Liner 40 - 600 PFA F500 Anti-static ring 40 - 600 Stainless steel 511 Backing ring 40 - 600 Silicone S511 Backing ring 40 - 600 FKM on request V55-2.1 Anti-friction disc 40 - 600 Stainless steel 55-2.2 Anti-friction disc 125 - 600 Stainless steel 550 Single-piece stem/valve disc assembly, PFA-

encapsulated40 - 300 Stainless steel (13 % Cr), PFA-encapsulated 6kF

550 Single-piece stem/valve disc assembly, PFA-encapsulated

350 - 600 Valve disc made of steel, PFA-encapsulated, stem made of stainless steel (13 % Cr)

6kF

550 Single-piece stem/valve disc assembly, PFA-encapsulated

40 - 300 Stainless steel (17 % Cr), PFA-encapsulated 6eF

554 Centring ring to NAMUR 40 - 300 Stainless steel 18.8 914 Fastening screw for body sections 40 - 600 Stainless steel A2-70 937.1 Spring lock washer 40 - 600 Stainless steel 937.2 Spring lock washer 125 - 600 Stainless steel 970 Name plate 40 - 300 Stainless steel

* : DN > 300 on request


8 KE PLASTOMER

Version with metal valve disc - DN 40-600

Sectional drawing

DN 40 - 100 DN 125 - 300 DN 350 - 600Wafer-type body T1 and full-lug type body T4 U-section body - T6

Detail view: connection of

body sectionsOn option for DN 40 - 300:centring ring to NAMUR

Detail view: back-up seal Stem/valve disc connection - DN 600

DN 40 - 100: back-up seal at upper stem section (part Nos. 411.1, 937.1 and 55-2.1)

DN 125 - 600: back-up seal at upper and lower stem sections (part Nos. 411.1, 411.2, 937.1, 937.2, 55-2.1 and 55-2.2)


KE PLASTOMER 9

List of components - Metal valve disc

Part No. Description DN Materials KSB code101 Lower body section - T1 and T4 40 - 300 Nodular cast iron EN-GJS-400-18U-LT (JS

1049)3l

101 Lower body section - T6 350 - 600 Nodular cast iron EN-GJS-400-15 (JS 1030) 3g102 Upper body section - T1 and T4 40 - 300 Nodular cast iron EN-GJS-400-18U-LT (JS

1049)3l

102 Upper body section - T6 350 - 600 Nodular cast iron EN-GJS-400-15 (JS 1030) 3g210 Axe 40 - 600 Stainless steel 1.4542 (17% Cr) 6e213 Actuating stem 40 - 600 Stainless steel 1.4542 (17% Cr) 6e310.1 Plain bearing 40 - 600 Steel with reinforced PTFE coating 310.2 Plain bearing 40 - 600 Steel with reinforced PTFE coating 310.3 Plain bearing 125 - 600 Steel with reinforced PTFE coating 310.4 Plain bearing 350 - 600 Steel with reinforced PTFE coating 411.1 Joint ring 40 - 600 Stainless steel 411.2 Joint ring 125 - 600 Stainless steel 412.1 O-ring 40 - 600 FKM 412.2 O-ring for flange sealing 40 - 600 Nitrile 412.3 O-ring for flange sealing 40 - 600 Nitrile 412.4 O-ring for flange sealing 40 - 600 Nitrile 412.5 O-ring for flange sealing 40 - 600 Nitrile 412.6 O-ring 350 - 600 FKM 412.7 O-ring 350 - 600 Nitrile 413 Liner 40 - 600 PFA F500 Anti-static ring 40 - 600 Stainless steel 511 Backing ring 40 - 600 Silicone S511 Backing ring 40 - 600 FKM on request V55-2.1 Anti-friction disc 40 - 600 Stainless steel 55-2.2 Anti-friction disc 125 - 600 Stainless steel 550 Valve disc 40 - 300 Stainless steel 1.4404 6550 Valve disc 350 - 600 Stainless steel 1.4408 6550 Valve disc 40 - 300 Stainless steel 1.4404, polished 6i550 Valve disc 350 - 600 Stainless steel 1.4408, polished 6i554 Centring ring to NAMUR 40 - 300 Stainless steel 18.8 905 Threaded rod 350 - 600 Steel 914 Fastening screw for body sections 40 - 600 Stainless steel A2-70 920 Hexagon nut 350 - 600 Steel + polyamide 6 937.1 Spring lock washer 40 - 600 Stainless steel 937.2 Spring lock washer 125 - 600 Stainless steel 940 Key 600 Steel 970 Name plate 40 - 300 Stainless steel


10 KE PLASTOMER

Dimensions

Drawings

Wafer-type body T1 and full-lug type body T4 U-section body - T6

* Flat end s in Ø z

Dimensions

[mm]

DN NPS Face-to-facelength

h1 BodyT1

BodyT2

BodyT6

Top flange to

ISO 5211

Stem end

Flat end

Stem end Valve disc

Square end

l1 h2 h2 h2 No. h4 s Ø z h3 u v e1 e240 1½ 33 125 51 54 - F05 10 11 14 24 - - 27 450 2 43 135 51 60 - F05 10 11 14 24 - - 38 665 2½ 46 145 61 67 - F05 10 11 14 24 - - 51 1080 3 46 160 74 89 - F05 10 11 14 24 - - 69 17100 4 52 175 90 105 - F05 10 11² 14 24 - - 90 24125 5 56 195 113 118 - F07 12 14 18 30 - - 116 35150 6 56 210 132 132 - F07 12 14 18 30 - - 145 47200 8 60 240 165 165 - F10 15 19 25 35 - - 196 70250 10 68 275 196 196 - F10 15 19 25 35 - - 247 91300 12 78 310 232 232 - F12 18 22 28 40 - - 293 111350 14 104** 349 - - 340 F14 22 - - - 30 37 335 123400 16 104 374 - - 373 F14 22 - - - 36 37 387 148450 18 129** 424 - - 432 F14 22 - - - 36 47 432 161500 20 129 450 - - 451 F16 26 - - - 40 46 484 186600 24 154 505 - - 511 F16 26 - - - 50 56 562 214** Face-to-face length does not comply with ISO 5752-20.

Manual actuation

The selection of actuators given below typically applies tobutterfly valves handling liquid fluids at the maximum flowvelocities shown.

Higher flow velocities and further actuator/valve combinationsare possible, depending on the operating conditions andhydraulic characteristics. Please contact us.


KE PLASTOMER 11

Levers S - SR

Lever S

▪ Can be locked in end positions

Lever SR

▪ Can be locked in 9 positions

DN NPS Max.velocity

Levers S + SR

l2 h2 Weight1)

[m/s] [mm] [mm] [kg]

40 1½ 5,0 180 180 0,550 2 5,0 180 190 0,565 2½ 5,0 180 200 0,580 3 5,0 260 235 0,6100 4 5,0 260 250 0,6125 5 5,0 330 280 0,7150 6 5,0 330 295 0,7

Lever SP

Lever SP

▪ Can be locked in all positions

DN NPS Max.velocity

Lever SP

l2 h2 Weight1)

[m/s] [mm] [mm] [kg]40 1½ 5,0 260 193 0,750 2 5,0 260 203 0,765 2½ 5,0 260 213 0,780 3 5,0 260 228 0,7100 4 5,0 260 243 0,7125 5 5,0 330 277 0,8150 6 5,0 330 292 0,8

Levers CR - CM

DN NPS Max.velocity

Levers CR - CM

l1 d1 l2 h5 Weight1)

[m/s] [mm] [mm] [mm] [mm] [kg]40 1½ 5,0 33 147 165 198 0,850 2 5,0 43 165 165 208 0,865 2½ 5,0 46 180 165 218 0,880 3 5,0 46 191 165 233 0,8100 4 5,0 52 224 230 261 1,2125 5 5,0 56 261 300 294 1,7150 6 5,0 56 288 300 309 1,7200 8 5,0 60 379 5102) 353 3,1

1) The weights given refer to the actuating element.2) High actuating torque, manual gearbox recommended


12 KE PLASTOMER

Manual gearbox MR

DN NPS Max.velocity

Actuator A B C D E h2 Weight1)

[m/s] [mm] [mm] [mm] [mm] [mm] [mm] [kg]40 1½ 5,0 MR25 62 184 66 64 225 276 750 2 5,0 MR25 62 184 66 64 225 286 765 2½ 5,0 MR25 62 184 66 64 225 296 780 3 5,0 MR25 62 184 66 64 225 311 7100 4 5,0 MR25 62 184 66 64 225 326 7125 5 5,0 MR25 62 184 66 64 225 346 7150 6 5,0 MR25 62 184 66 64 225 361 7200 8 5,0 MR25 62 184 66 64 225 391 7250 10 5,0 MR50 74 184 77 76 225 438 10300 12 5,0 MR50 74 184 77 76 225 473 10350 14 5,0 MR100 86 233 88 88 350 586 15400 16 5,0 MR100 86 233 88 88 350 611 15450 18 5,0 MR100 86 233 88 88 350 661 15500 20 5,0 MR200 120 270 108 117 350 698 24600 24 5,0 MR200 120 270 108 117 350 753 24


KE PLASTOMER 13

Variants

ACTELEC electric actuator ACTAIR / DYNACTAIR pneumatic actuators

ACTAIR +

AMTRONIC / SMARTRONIC positioners

ACTAIR +

AMTROBOX limit switch box

ACTO hydraulic actuator

Deck stand Extended neck Chain wheel Cardan connection


14 KE PLASTOMER

Notes on installation

Connections

The bodies can be installed between the following lineconnections:

▪ EN 1092 PN 10 and 16

▪ ASME B16.5 Cl.150

▪ JIS 10K

Other connection types on request

Wafer-type body - T1

DN NPS EN 1092 ASME

PN 10 PN 16 B16.5 Cl.15040 1½ ✔ ✔ ✔50 2 ✔ ✔ ✔65 2½ ✔ ✔ ✔80 3 ✔ ✔ ✔100 4 ✔ ✔ ✔125 5 ✔ ✔ ✔150 6 ✔ ✔ ✔200 8 ✔ ✔ ✔250 10 ✔ ✔ ✔300 12 ✔ ✔ ✔

Full-lug body with raised faces - T4

DN NPS EN 1092 ASME

PN 10 PN 16 B16.5 Cl.15040 1½ ✔ ✔ ✔50 2 ✔ ✔ ✔65 2½ ✔ ✔ ✔80 3 ✔ ✔ ✔100 4 ✔ ✔ ✔125 5 ✔ ✔ ✔150 6 ✔ ✔ ✔200 8 ✔ ✔ ✔250 10 ✔ ✔ ✔300 12 ✔ ✔ ✔

U-section body - T6

DN NPS EN 1092 ASME JIS

PN 10 PN 16 B16.5 Cl.150 10K350 14 ✔ ✔ ✔ ✔400 16 ✔ ✔ ✔ ✔450 18 ✔ ✔ ✔ ✔500 20 ✔ ✔ ✔ ✔600 24 ✔ ✔ ✔ ✔

Key to the symbols

Symbol Description

✔ Installation possible


KE PLASTOMER 15

Dead-end service and downstream dismantling

Downstream dismantling Dead-end service

For downstream dismantling,

successively loosen diagonally opposed tie rods.


16 KE PLASTOMER

Bolting and weights


N.B.: Bolting is not included in our standard scope of supply.

Earthing detail

Length of tie rods L = l1 + 2e + 2f

L: minimum length of tie rods

l1: face-to-face length of butterfly valve

e: flange thickness (customer-specific)

f: thickness of nut + standardised overhang of tie rod

*: M5 depth 7 for earth connection



d1 EN 1092 PN 10 EN 1092 PN 16 ASME B16.5 Class 150 Weight

Ø M Tie rod Ø M Tie rod UNC Tie rod

l1 f Qty** f Qty** f Qty** [kg]40 1½ 33 124 M16 18 4 M16 18 4 1/2" 16 4 2,050 2 43 150 M16 18 4 M16 18 4 5/8" 18 4 2,765 2½ 46 170 M16 18 4/8 M16 18 4/8 5/8" 18 4 3,880 3 46 138 M16 18 8 M16 18 8 5/8" 18 4 4,6100 4 52 188 M16 18 8 M16 18 8 5/8" 18 8 6,6125 5 56 214 M16 18 8 M16 18 8 3/4" 22 8 9,5150 6 56 244 M20 22 8 M20 22 8 3/4" 22 8 11,9200 8 60 276 M20 22 8 M20 22 12 3/4" 22 8 16,5250 10 68 312 M20 22 12 M24 26 12 7/8" 26 12 24,0300 12 78 444 M20 22 12 M24 26 12 7/8" 26 12 38,0**: Number of tie rods per side


KE PLASTOMER 17


N.B.: Bolting is not included in our standard scope of supply.

Earthing detail

Max. bolt length

A = e + X

A: max. bolt length

X: max. thread engagement depth


B: min. thread length > A-e





d1 EN 1092 PN 10 EN 1092 PN 16 ASME B16.5 Class 150 Weight

Ø M Bolt A Ø M Bolt A UNC Bolt A

l1 X Qty** X Qty** X Qty** [kg]40 1½ 33 147 M16 14 4 M16 14 4 1/2" 14 4 2,750 2 43 165 M16 18 4 M16 18 4 5/8" 18 4 3,765 2½ 46 180 M16 20 4/8 M16 20 4/8 5/8" 20 4 4,8- 3 46 191 - - - - - - 5/8" 20 4 5,680 - 46 224 M16 20 8 M16 20 8 - - - 6,1100 4 52 261 M16 22 8 M16 22 8 5/8" 22 8 8,6125 5 56 288 M16 22 8 M16 22 8 3/4" 23 8 12,5150 6 56 326 M20 26 8 M20 26 8 3/4" 26 8 15,2200 8 60 379 M20 26 8 - - - 3/4" 26 8 22,0200 8 60 392 - - - M20 26 12 - - - 23,0250 10 68 482 M20 26 12 M24 30 12 7/8" 28 12 36,0300 12 78 562 M20 26 12 M24 30 12 7/8" 28 12 56,0**: Number of bolts per side


18 KE PLASTOMER

U-section body - T6

N.B.: Bolting is not included in our standardscope of supply.

Earthing detail

Length of tie rods

L = l1 + 2e + 2f

L: minimum length of tie rods



f: thickness of nut + standardised overhangof tie rod

Max. bolt length

A2 = e + Y

A: max. bolt length

X: max. thread engagement depth


B2: min. bolt thread length > A2-e


U-section body - T6


d1 EN 1092 PN 10 EN 1092 PN 16 Weight

Ø M Tie rod Bolt A2 Ø M Tie rod Bolt A2

l1 f Qty** Y Qty*** f Qty** Y Qty*** [kg]350 14 104**** 534 M20 29 16 - - M24 29 16 - - 78400 16 104 597 M24 29 16 - - M27 29 16 - - 105450 18 129**** 635 M24 29 16 22 4 M27 32 16 20 4 150500 20 129 698 M24 29 16 26 4 M30 35 16 26 4 200600 24 154 830 M27 32 12 31 4 M33 38 16 31 4 300


d1 ASME B16.5 Class 150 Weight

UNC Tie rod Bolt A2

l1 f Qty** Y Qty*** [kg]350 14 104*** 534 1" 32 12 - - 78400 16 104 597 1" 32 12 - - 105450 18 129*** 635 1"1/8 35 16 33 4 150500 20 129 698 1"1/8 35 16 26 4 200600 24 154 830 1"1/4 38 16 26 4 300 Quantity of nuts = Quantity of tie rods x 2*** Number of bolts per side**** Face-to-face length does not comply with ISO 5752-20.


KE PLASTOMER 19

Flange dimensions

The valves can be installed between all commercial matingflanges and line connections without requiring any flangegaskets.

The elastomer liner alone provides a tight seal at the flangeconnections.

The drawings below show a valve of body type T1 installedbetween flanges.

Please verify that the connection meets the requirements givenbelow.

The flange dimensions indicated in the table apply to all bodytypes.

Ø1 and Ø3: flange face diameter

Ø2: pipe OD with loose plate flange to DIN 2642 and NF E29-251

Dimensions

DN NPS Optimal Max.permissibleØ

Min.permissible Øof flangeface

Min.diameter ata distance of10 mm fromthe flangeface

Min. diameter at adistance of 20 mmfrom the flangeface

Min. permissibleraised face Ø offlanges withraised faces

OD of PFA linerflanges

Ø1 Ø2 Ø3 Ø4 Ø5 Ø6 Ø740 1½ 40 55 27 - - 71 8250 2 53 68 38 - - 84 10065 2½ 65 82 51 - - 98 12080 3 79 97 69 50 - 113 133100 4 98 117 90 74 43 133 158125 5 125 143 116 104 85 162 188150 6 148 171 145 136 122 192 212200 8 197 223 196 189 179 244 268250 10 249 277 247 241 233 298 320300 12 298 329 293 288 280 350 370350 14 348 372 344 337 329 412 430400 16 398 423 396 390 383 462 480450 18 447 474 441 434 427 522 533500 20 497 524 493 487 480 572 586600 24 579 624 570 565 558 682 676


20 KE PLASTOMER

0166

.1/1

1-D

E12

.04.

2016

KSB S.A.S.4, allée des Barbanniers • 92635 Gennevilliers Cedex (France)Tél. +33 1 41 47 75 00 • Fax +33 1 41 47 75 10 • www.ksb.com

ke plastomer - ksb · pdf fileprocess engineering sugar industry ... material material number...

Documents