ACTIVE CONSTITUENTS:653 g/L PARAFFINIC OIL

217 g/L NON-IONIC FATTY ACID ETHOXYLATES

An emulsifiable oil product to assist the effectiveness of certain herbicides and defoliants

IN-BOUND improves your spray results by;- increasing wetting and spreading of spray droplets

- increasing penetration through waxy cuticles- reducing spray droplet evaporation rates

9189

21F-

1

CAUTIONKEEP OUT OF REACH OF CHILDREN

READ SAFETY DIRECTIONSBEFORE OPENING OR USING

SPRAY ADJUVANTIN-BOUND†

918921B-3

APVMA Approval Number: 57086/61352

SPRAY ADJUVANTIN-BOUND†

GENERAL INSTRUCTIONS (cont)

MIXINGQuarter fill the spray tank with water and add the required amount of herbicide(s). Complete the spray tank filling with agitator running, adding the IN-BOUND last. Only make up sufficient spray solution for immediate spraying - avoid storing.

PROTECTION OF WILDLIFE, FISH, CRUSTACEANS AND ENVIRONMENTDo not contaminate streams, rivers or waterways with the chemical or used containers.

STORAGE AND DISPOSALStore in the closed, original container, in a cool, well-ventilated area. Do not store for prolonged periods in direct sunlight. Do not store near food, feed stuffs, fertiliser or seed.

Triple, or preferably pressure rinse containers before disposal. Add rinsing to spray tank. Do not dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and bury empty containers in a local authority landfill. If no landfill is available, bury the containers below 500mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.

Refillable Containers: For 110L and 1000L containers empty contents fully into application equipment. Close all valves and return to point of supply.

Will irritate the eyes and may irritate the skin. Avoid contact with eyes and skin. When opening the container and preparing spray, wear elbow-length PVC gloves and face shield or goggles. If product in eyes, wash it out immediately with water. Wash hands after use. After each day’s use, wash gloves and face shield or goggles.

EXPLOSION WARNINGEmpty containers may contain liquid and/or vapour residue which can be explosive if exposed to ignition source at temperatures above 90˚C. Such conditions may occur during cutting or welding. DO NOT CUT OR WELD METAL DRUMS. Explosion may cause injury or death.

SMALL SPILL MANAGEMENTWear appropriate clothing while cleaning up small spills. Apply absorbent material such as earth, cat litter or clay granules to the spill. Sweep up material for disposal when absorption is complete. Dispose of the contaminated material in accordance with STATE and/or LOCAL regulations.

FIRST AIDIf poisoning occurs, contact a doctor or Poisons Information Centre (phone Australia 131126). If swallowed DO NOT induce vomiting. Give a glass of water.

MATERIAL SAFETY DATA SHEETAdditional information is listed in the Material Safety Data Sheet which can be obtained from the supplier.

SAFETY DIRECTIONS

DIRECTIONS FOR USE

NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.

WITHHOLDING PERIOD: To be determined according to choice of herbicide(s)

GENERAL INSTRUCTIONS

IMPORTANTPrior to use, read all directions on this label and on the labels of the herbicide(s) being used. The herbicide(s) labels for specific usage and restrictions have precedence over directions for use referred to on this label.

When mixing with Atrazine or other difficult to mix granular or suspension concentrate products, ensure thorough mixing of the herbicide before addition of IN-BOUND.

CROP SAFETYPrior to use, read all directions on this label and on the label of the herbicide(s) being used. The herbicide(s) label for specific usage and restrictions have precedence over directions for use referred to on this label.

If in doubt about the appropriateness of using IN-BOUND, please test by application to a small area before using it on a full-scale basis.

TANK CLEANINGEnsure spray equipment is completely free of herbicide residues between applications. Follow cleaning instructions on herbicide labels.

COMPATIBILITYIN-BOUND is compatible with a wide range of herbicides including.Atrazine herbicides, Fusilade* (and other fluazifop-p products), Fusion*, Achieve* (and other tralkoxydim products), Sertin*, Select* (and other clethodim products), Verdict* (and other haloxyfop products), Eclipse*, Shogun*, Broadstrike* (and other flumetsulam products), , Lontrel* 750 SG (and other clopyralid products), Targa* (and other quizalofop-p-ethyl products), Precept* and Topik* (and other clodinafop-propargyl products)

CROP OR SITUATION

Broadacre cropping including Cereals, Legumes and fallow

Sugarcane

Aerial Spraying

Horticulture

Spot spraying

Cotton (with defoliants)

RATE PER 100 LITRES WATER

Where specified use 500mL IN-BOUND/100L water applying a minimum of 250mL of Inbound per hectare.

1L

500ml

500ml

CRITICAL COMMENTS

Herbicide products may have specific recommendation for adjuvant rate. Rate may be varied to suit environmental conditions.

Apply a minimum of 500ml IN-BOUND per hectare.

Apply a minimum of 1L IN-BOUND per hectare.

Apply a minimum of 250ml IN-BOUND per hectare.

Apply to point of run off.

Apply IN-BOUND at 500ml/ha in combination with defoliants such as Dropp* or Prep*

Hazard StatementsHarmful if swallowed. Causes serious eye irritation.Precautionary StatementsWash hands thoroughly after handling. Do not eat, drink or smoke when using this product. If swallowed rinse mouth. Call a POISON CENTER or doctor if you feel unwell. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists get medical advice.

NOTICE: Victorian Chemical Company Pty. Limited accepts no responsibility for any consequences whatsoever arising from the use of this product except responsibility imposed under any applicable law. The buyer assumes all risk and liability resulting from improper handling, storage or use and accepts and uses this product on these conditions.

Victorian ChemicalCompany Pty. Limited83 Maffra Street, Coolaroo, Victoria 3048, AustraliaTelephone: (03) 9301 7000Facsimile: (03) 9309 7966Email: products@vicchem.comWebsite: www.vicchem.com † Trademark used under licence. * Third Party Trademark. For applicable packs