&khovhd%xiihw - mocka...once assembled lift furniture into place, do not drag. use a drill to...
TRANSCRIPT
A B C D E F
G H JI
Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
smalldowel x22
boltx14
locking nut x14
small screw x32
longscrew x9
plastic glide x4
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
nutx4
hingex8
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied.
longdowel x2
bolt x4
washerx2
V W
X Y
screw x1
screwx1
wallanchor x1
safetystrap x1
Z
Wall Strap
K L
wedge x4
screw x4
M N
dowelx4
allenkey x1
1mocka.co.nz | mocka.com.au
Chelsea BuffetAssembly InstructionsThank you for your purchase. Please follow the instructions below for correct assembly.
1 2
Attach panel [4] to panel [5] using 2x bolts (C) and secure with 2x locking nuts (D). Tighten with a screwdriver.
Attach panel [6] to panel [4] using 2x long dowels (B) and 2x long screws (I). Attach 2x bolts (C) to panel [4]. Tighten with a screwdriver.
6
5
4
C
D
C
D4
D
C
C
B
B
I
I
2mocka.co.nz | mocka.com.au
Chelsea BuffetAssembly Instructions
1 2
Attach panel [4] to panel [5] using 2x bolts (C) and secure with 2x locking nuts (D). Tighten with a screwdriver.
Attach panel [6] to panel [4] using 2x long dowels (B) and 2x long screws (I). Attach 2x bolts (C) to panel [4]. Tighten with a screwdriver.
6
5
4
C
D
C
D4
D
C
C
B
B
I
I
3 4
Attach panel [7] to panel [4] and secure with 2x locking nuts (D). Tighten with a screwdriver.
Insert 4x dowels (A) and 2x bolts (C) into panel [2]. Insert 4x dowels (A) and 2x bolts (C) into panel [3].
7
4
3
2
D
AC
C
A
A
AC
CA AD
D
3mocka.co.nz | mocka.com.au
Assembly InstructionsChelsea Buffet
5 6
Attach panels [2] and [3] to panel [4] using 4x locking nuts (D). Tighten with a screwdriver.
Insert 6x bolts (C) into panel [1].
4
13
2
D
D
D
D
C
C
C
C
C
C
Chelsea BuffetAssembly Instructions
4mocka.co.nz | mocka.com.au
Jolt WardrobeASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
5 6
Attach panels [2] and [3] to panel [4] using 4x locking nuts (D). Tighten with a screwdriver.
Insert 6x bolts (C) into panel [1].
4
13
2
D
D
D
D
C
C
C
C
C
C
7 8
Connect panels [9] together using the connector [10] as shown.
10
9
1
Attach panel [1] to panels [2] and [3] using 6x small dowels (A) and secure with 6x locking nuts (D). Tighten with a screwdriver.
A
A
A
D
D
3
2
9
Chelsea BuffetAssembly Instructions
5mocka.co.nz | mocka.com.au
9 10
Slide panels [9] down between the grooves of panels [2] and [3] to form the back of the unit.
8
3
2
11
9
9
M
M
G
11
H
M
11
Attach two leg panels [11] to the underside of panel [8] as shown, using 2x dowels (M) and 2x bolts (G). Tighten with the allen key (N). Secure with 2x nuts (H) and tighten them with a flathead screwdriver.
×
N
Chelsea BuffetAssembly Instructions
6mocka.co.nz | mocka.com.au
9 10
Slide panels [9] down between the grooves of panels [2] and [3] to form the back of the unit.
8
3
2
11
9
9
M
M
G
11
H
M
11
Attach two leg panels [11] to the underside of panel [8] as shown, using 2x dowels (M) and 2x bolts (G). Tighten with the allen key (N). Secure with 2x nuts (H) and tighten them with a flathead screwdriver.
×
N
11 12
8
12
11A
A
IJ
JJ
J
M
M
G
11
Attach the remaining two leg panels [11] to panel [8] using 2x dowels (M) and 2x bolts (G), tightening with the allen key (N). Secure with 2x nuts (H). Attach 4x plastic glides (J) to the end of each leg using a hammer. Now attach panel [12] using 2x dowels (A) and secure with 1x long screw (I). Tighten with a screwdriver.
H
M
11
I
I
I
I
A
A
AA
I
I
8
3
2
Attach panel [8] to panels [2] and [3] using 6x small dowels (A) and secure with 6x screws (I). Tighten with a screwdriver.
N
Chelsea BuffetAssembly Instructions
7mocka.co.nz | mocka.com.au
13 14
Attach door panels [13] and [14] to the main unit as shown, using 2x small screws (F) to secure each hinge (E). Tighten with a screwdriver.
13
14
13
14
F
F
Attach 2x hinges (E) to panel [13] as shown and secure with 4x small screws (F). Attach 2x hinges (E) to panel [14] and secure with 4x small screws (F). Tighten with a screwdriver. Repeat this step to assemble the remaining two doors.
13
F
F
F
F
E
E
14
F F
F F
E
E
Doors x4
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door hinge until they are
sitting flush.F
F
Chelsea BuffetAssembly Instructions
8mocka.co.nz | mocka.com.au
13 14
Attach door panels [13] and [14] to the main unit as shown, using 2x small screws (F) to secure each hinge (E). Tighten with a screwdriver.
13
14
13
14
F
F
Attach 2x hinges (E) to panel [13] as shown and secure with 4x small screws (F). Attach 2x hinges (E) to panel [14] and secure with 4x small screws (F). Tighten with a screwdriver. Repeat this step to assemble the remaining two doors.
13
F
F
F
F
E
E
14
F F
F F
E
E
Doors x4
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door hinge until they are
sitting flush.F
F
15 16
Once assembled lift furniture into place, do not drag. Use a drill to create a small hole lining up with the top of the safety strap (V). Fasten to wall using 1x wall plug (X), 1x washer (Z) and 1x screw (Y). Ensure unit is balanced and steady before use. You’re done, enjoy!
9
1
X
Y
Z
wall plug
screw
strapwasher
Wall Strap
Attach 4x wedges (K) to the corners of the panel [9] and secure with 4x screws (L). Attach 1x safety strap (V) to the back edge of panel [1] using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
1V
W
Z
screw
strap
washer
KL
K
L
K
L
9
Chelsea BuffetAssembly Instructions
9mocka.co.nz | mocka.com.au