kiln humidity and air psychrometrics - esf home · 1/18/2015 1 kiln humidity and air psychrometrics...
TRANSCRIPT
1/18/2015
1
Kiln Humidity and Air Psychrometrics
Bill Smith
SUNY ESF Wood Products
Syracuse, NY
TemperatureRelative HumidityDew PointVapor PressureEMC – equilibrium moisture content
1/18/2015
2
Temperature
• Temperature— Degree of hotness or coldness.
• Dry-bulb—The temperature of the kiln air.
• Wet-bulb—The temperatures indicated by any temperature measuring device, the sensitive element of which is covered by a smooth, clean, soft, water-saturated cloth (wet-bulb wick or porous sleeve).
Temperature
• Temperature— Degree of hotness or coldness.
• Drop across the load—The reduction in the dry-bulb temperature of the air as it flows through the load and is cooled by evaporating moisture from the load of lumber.
1/18/2015
3
Relative Humidity
• Humidity, relative—Ratio of the amount of water vapor present in the air to that which the air would hold at saturation at the same temperature. It is usually considered on the basis of the weight of the vapor, but for accuracy it should be considered on the basis of vapor pressures.
• Humidity, absolute—The weight of water vapor per unit volume of space.
Dew Point
• Dew point—The temperature at which steam or water vapor begins to condense.
1/18/2015
4
EMC
• Equilibrium moisture content—The moisture content at which wood neither gains nor loses moisture when surrounded by air at a given relative humidity and temperature.
Interior use applications must be:
• Kiln dried hardwoods to 6-7% MC – (North American market; export perhaps
somewhat higher)
• Eastern white pine perhaps to ~10-12% MC
1/18/2015
5
1/18/2015
6
Equilibrium Moisture Content and Relative Humidity
• RH %
– 90
– 80
– 65
– 50
– 30
– 0
• EMC %
– 20
– 16
– 12
– 9
– 6
– 0
1/18/2015
7
RH and EMC “sorption isotherm”
1/18/2015
8
1/18/2015
9
1/18/2015
10
Kiln Drying Schedules -
• The purpose is to dry as rapidly as possible, to be economical.
• However, drying must be controlled to avoid value reducing defects.
• Typically, the temperature and the relative humidity (wood EMC) are controlled.
• Temperature is raised and relative humidity lowered as wood dries.
Kiln Drying Schedules -
• So, we know what we want.
• And we know what we need.
• Do we always get what we want?
• Really, you can’t always get what you want.
• But, do we get what we need!
1/18/2015
11
Some typical schedules -
Some typical schedules -
1/18/2015
12
Some typical schedules -
Some typical schedules -
1/18/2015
13
Some typical schedules -
Schedule Control -
1/18/2015
14
1/18/2015
15
1/18/2015
16
Schedule Control -
1/18/2015
17
1/18/2015
18
1/18/2015
19
1/18/2015
20
1/18/2015
21
1/18/2015
22
Maintainining %MC in Storage (warehouse)
really the same issue
1/18/2015
23
TemperatureRelative Humidity% EMC
– Relationships
Temperature – down?Air “holds” less H2O
Relative Humidity - higher% EMC – higherlumber %MC - higher
1/18/2015
24
TemperatureRelative Humidity% EMC
– Relationships
1/18/2015
25
Add heatTemperature – higher air can “hold” more H2ORelative Humidity - lowerlumber drier
Remember –outdoor RH - 100% in early morning- 30-40% in later afternoon
1/18/2015
26
Enclosed storage- Keep doors closed, especially when %RH and vapor pressure is high.- warm air can be dry- cool air can be humid
Thank you!• Questions?
• Comments?– Bill Smith
– 315/470-6832